File gasnet.changes of Package gasnet
-------------------------------------------------------------------
Sun Jun 7 13:52:05 UTC 2020 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
- Add gasnet-fix-multiple-definitions.patch to fix compatibility with GCC10
-------------------------------------------------------------------
Fri Oct 4 07:03:25 UTC 2019 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
- Always use the default openmpi
-------------------------------------------------------------------
Thu Sep 26 07:45:57 UTC 2019 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
- Update to GASNet 1.32.0
- Libfabric (ofi-conduit)
- Fix bug 3682: incorrect behavior for non-bulk puts larger than a page
- Compatibility fixes for libfabric version 1.6
- InfiniBand Verbs (ibv-conduit)
- GASNET_DISABLE_MUNMAP now defaults to enabled for ibv-conduit.
- Now use HCA's maximum supported MTU by default, resulting in nearly a 2x
increase in peak Get bandwidth on modern HCAs.
- Fix bug 3339: allow ibv-conduit to operate on Omni-Path hardware.
ofi-conduit and psm-conduit remain the recommended conduits for Omni-Path.
- Portable UDP (udp-conduit)
- Reduce polling cost on single-supernode runs. smp-conduit remains the
recommended conduit for use on single-supernode shared-memory systems.
- Portable MPI (mpi-conduit)
- Reduce polling cost on single-supernode runs. smp-conduit remains the
recommended conduit for use on single-supernode shared-memory systems.
- GASNet tools (spec v1.12)
- Numerous improvements to backtrace support, including fixing the
following bugs:
- Bug 3624: Improve backtrace fail-over behavior
- Bug 3625: call prctl(PR_SET_PTRACER,...) before backtrace on Linux
- Bug 3626: prioritize lldb on Mac OS X
- Bug 3627: unblock the unfreeze signal prior to backtrace
- Bug 3637: Fix EXECINFO backtrace for *BSD
- Enable GDB backtrace on Cray systems, when available
- Bug 3664: GASNETT_PREDICT_{TRUE,FALSE} result value semantics change slightly
- Add gasnett_unreachable()
- GASNETT_PLEASE_INLINE has been removed. Recommended replacement is `inline`
- Improve behavior when installed public headers are passed to a compiler
that was not probed at configure time.
- General and Misc.
- GASNET_MAX_SEGSIZE syntax has been expanded and now defaults to 85% of physical
memory, split evenly between co-located processes on a host.
Configure option to control this default renamed to --with-max-segsize=
- GASNET_VIS_{AMPIPE,REMOTECONTIG} is now enabled by default on most conduits
- GASNET_VIS_MAXCHUNK default value adjusted on many conduits to improve perf
- New knobs GASNET_VIS_{PUT,GET}_MAXCHUNK for tuning put/get VIS chunk size
- Fix GASNET_NULL_ARGV_OK for mpi-conduit and mpi-spawner
- Additional debug checks now detect prohibited overlap in loopback RMA and AMLong.
- The extended-ref source directory has been re-arranged
- Clients using gasnet_coll_* must now explicitly #include <gasnet_coll.h>
- Events leading up to a crash are now more reliably reported in the trace file.
- Platform support/portability
- Support for Microsoft Windows 10 Subsystem for Linux (WSL) has graduated
out of BETA status
- Update MALLOC_OPTIONS setting for OpenBSD 6.x
- Add gasnetrun support for IBM Job Step Manager (jsrun)
- Add PLATFORM_COMPILER_C(XX)_LANGLVL to portable_platform (v5)
- Fix bug 3741: misidentification of IBM XL Compilers 13.1.6 and newer (v6)
- Fix bug 3743: verify correct KNL processor tuning on CNL
- Fix bug 3679: AMUDP incompatibility with PGI C++ 17+
- Public headers are less susceptible to malfunctions when compiled with
un-prefixed tokens redefined by the preprocessor. C/C++ keywords remain
reserved, as do tokens prepended by one or more underscores or one of the
reserved gasnet prefixes (see 'GASNet coding standards' in README-devel)
- Configure and Build
- Option --enable-strict-prototypes has been removed, see bug 3608.
- Fix bug 3613: warning on #pragma GCC diagnostic for gcc < 4.6
- Fix bug 3629: avoid a parallel make bug
- Add a git hash "watermark" to libraries
- Warning enable flags are removed from GASNET_C(XX)FLAGS and friends.
The flags remain available in GASNET_DEVWARN_C(XX)FLAGS for opt-in.
- Drop gasnet-s390-support.patch as it was fixed upstream
- Enable SMP and PSM conduit.
-------------------------------------------------------------------
Mon Jan 7 08:45:39 UTC 2019 - Bernhard Wiedemann <bwiedemann@suse.com>
- Add gasnet-build-hostname.patch to make build reproducible (boo#1084909)
-------------------------------------------------------------------
Thu Oct 5 13:04:42 UTC 2017 - nmoreychaisemartin@suse.com
- Force load of MPI environment
- Use OpenMPI2 instead of OpenMPI1 except for ppc64be (unsupported by OpenMPI >= 2)
-------------------------------------------------------------------
Wed Sep 6 08:20:22 UTC 2017 - nmoreychaisemartin@suse.com
- Force timer to use POSIX RT instead of native, as native is not
precise enough in VM and causes validation to crash.
-------------------------------------------------------------------
Fri Sep 1 17:03:06 UTC 2017 - junghans@votca.org
- Version update to 1.30.0:
* InfiniBand Verbs (ibv-conduit)
- Improve the handling of GASNET_PHYSMEM_* env vars
* Libfabric (ofi-conduit)
- Fix bug 3426: Unbounded recursion within gasnetc_ofi_poll()
- Significant improvements to AM buffer management and wire header overheads
- Finer-grained control over AM buffering, see ofi-conduit/README
- Initialization cleanups for stricter compliance with the OFI specification
- Support for the Intel(R) True Scale Fabric provider, psm, has been removed.
The Intel(R) Omni-Path Fabric is still supported through the psm2 provider.
- We now recommend ofi-conduit for the Intel Omni-Path fabric.
- The conduit has been validated on libfabric version 1.5.0.
* Intel Omni-Path PSM2 (psm-conduit)
- This conduit is now DEPRECATED.
- Use of ofi-conduit with libfabric's psm2 provider is recommended for users
of the Intel Omni-Path fabric.
* GASNet tools
- Fix bug 3448: x86*/Linux timers once again default to use of the TSC due
to addition of new logic for correct calibration on newer Intel CPUs.
- Add gasnett_nsleep()
-------------------------------------------------------------------
Fri Aug 11 05:18:19 UTC 2017 - bwiedemann@suse.com
- Add gasnet-build-id.patch to fix build-compare (boo#1047218)
-------------------------------------------------------------------
Fri Jun 30 07:37:04 UTC 2017 - nmoreychaisemartin@suse.com
- Remove BuildRequires for libpsm2-compat
- Build with OFI support on x86
-------------------------------------------------------------------
Fri Jun 9 08:17:36 UTC 2017 - nmoreychaisemartin@suse.com
- Enable OFI conduit on x86_64
- Disable debug to build GASnet in optimized mode
- Add gasnet-date-time.patch to remove build date/times from binaries
- Add gasnet-s390-support.patch and enable s390/s390x builds
-------------------------------------------------------------------
Thu Jun 8 11:37:26 UTC 2017 - nmoreychaisemartin@suse.com
- Remove version dependency to libibverbs
-------------------------------------------------------------------
Wed May 31 12:54:20 UTC 2017 - nmoreychaisemartin@suse.com
- Build gasnet for all arch but s390*, s390x not supported by upstream:
https://upc-bugs.lbl.gov/bugzilla/show_bug.cgi?id=3523
- PSM2 support is only for x86_64
-------------------------------------------------------------------
Tue May 16 15:38:38 UTC 2017 - nmoreychaisemartin@suse.com
- Support gasnet over OFI and ibverbs
-------------------------------------------------------------------
Fri Apr 7 15:23:19 CEST 2017 - pth@suse.de
- Remove conflict marker.
-------------------------------------------------------------------
Fri Mar 31 12:04:16 UTC 2017 - nmoreychaisemartin@suse.com
- Fix dynamic linking for PSM libraries
-------------------------------------------------------------------
Fri Mar 31 13:35:50 CEST 2017 - pth@suse.de
- GASnet relies on libpsm2-compat which again only supports x86_64
so make GASnet do the same.
-------------------------------------------------------------------
Wed Mar 29 07:57:50 CEST 2017 - pth@suse.de
- Make dependencies on libs now coming from rdma-core versioned.
-------------------------------------------------------------------
Sat Mar 18 19:02:30 UTC 2017 - junghans@votca.org
- Version update to 1.28.2, lot of changes, see:
https://gasnet.lbl.gov/dist/ChangeLog
-------------------------------------------------------------------
Mon Feb 6 14:52:50 UTC 2017 - jengelh@inai.de
- Declare bash as build shell
-------------------------------------------------------------------
Mon Oct 24 16:17:17 UTC 2016 - junghans@votca.org
- Version update to 1.28.0, lot of changes, see:
https://gasnet.lbl.gov/dist/ChangeLog
-------------------------------------------------------------------
Mon Oct 17 08:54:54 UTC 2016 - jengelh@inai.de
- Implement shared library naming guideline
- Trim description
-------------------------------------------------------------------
Tue Sep 20 02:39:45 UTC 2016 - junghans@votca.org
- added %check block and related patch from upstream:
https://bitbucket.org/berkeleylab/gasnet/pull-requests/37
- link shared libs, so that deps are fulfilled
-------------------------------------------------------------------
Mon Sep 12 15:26:11 UTC 2016 - junghans@votca.org
- Added upstream patch to support overwriting of flags:
https://bitbucket.org/berkeleylab/gasnet/pull-requests/34
- Build shared libs manually as upstream doesn't want to support them:
https://bitbucket.org/berkeleylab/gasnet/pull-requests/36
but we need them for legion package
-------------------------------------------------------------------
Sun Sep 4 23:26:38 UTC 2016 - junghans@votca.org
- Update to GASNet 1.26.4
Details: https://gasnet.lbl.gov/dist/ChangeLog
-------------------------------------------------------------------
Sun May 29 15:29:33 UTC 2016 - junghans@votca.org
- import into Science overlay
-------------------------------------------------------------------
Thu Mar 10 10:52:14 UTC 2016 - nirmoy.das@suse.com
- Initial package, version: 1.26.0(fate#319250)
