File pgbackrest.changes of Package pgbackrest
-------------------------------------------------------------------
Mon Feb 6 07:53:56 UTC 2023 - Andrea Manzini <andrea.manzini@suse.com>
- update to version 2.44
+ Remove support for PostgreSQL 9.0/9.1/9.2.
+ Restore errors when no backup matches the current version of PostgreSQL.
+ Add compress-level range checking for each compress-type.
+ Documentation improvements
-------------------------------------------------------------------
Tue Dec 6 16:32:27 UTC 2022 - Andrea Manzini <andrea.manzini@suse.com>
- update to version 2.43
+ Bug Fixes:
- Fix missing reference in diff/incr backup.
+ Improvements:
- Add hint when an option is specified without an index.
- update to version 2.42
+ Bug Fixes:
- Fix memory leak in file bundle backup/restore.
- Fix protocol error on short read of remote file.
+ Improvements:
- Do not store references for zero-length files when bundling.
- Use more generic descriptions for pg_start_backup()/pg_stop_backup().
-------------------------------------------------------------------
Tue Sep 20 18:33:00 UTC 2022 - Marcus Rueckert <mrueckert@suse.de>
- update to version 2.41
+ Bug Fixes:
- Fix incorrect time expiration being used for non-default
repositories. (Reviewed by Stefan Fercot. Reported by Adam
Brusselback.)
- Fix issue when listing directories recursively with a filter.
(Reviewed by Stephen Frost. Reported by Efremov Egor.)
+ Features:
- Backup key/value annotations. (Contributed by Stefan Fercot.
Reviewed by David Steele. Suggested by Adam Berlin.)
+ Improvements:
- Support --set in JSON output for info command. (Contributed
by Stefan Fercot. Reviewed by David Steele. Suggested by
Anton Kurochkin.)
- Update archive.info timestamps after a successful backup.
(Reviewed by Stefan Fercot. Suggested by Alex Richman.)
- Move standby timeline check after checkpoint. (Reviewed by
Stefan Fercot, Keith Fiske. Suggested by Keith Fiske.)
- Improve warning message on backup resume. (Suggested by
Cynthia Shang.)
+ Additional Notes
- Documentation Improvements:
- Add absolute path for kill in pgbackrest.service. (Suggested
by Don Seiler.)
- changes from 2.40 OpenSSL 3 Support
+ Improvements:
- OpenSSL 3 support. (Reviewed by Stephen Frost.)
- Create snapshot when listing contents of a path. (Reviewed by
John Morris, Stephen Frost.)
- Force target-timeline=current when restore type=immediate.
(Reviewed by Stephen Frost.)
- Truncate files during delta restore when they are larger than
expected. (Reviewed by Stephen Frost.)
- Disable incremental manifest save when resume=n. (Contributed
by Reid Thompson. Reviewed by David Steele.)
- Set backup percent complete to zero before copy start.
(Contributed by Reid Thompson. Reviewed by David Steele.)
- Use S3 IsTruncated flag to determine list continuation.
(Reviewed by John Morris, Soulou. Suggested by Christian
Montagne.)
+ Documentation Bug Fixes:
- Skip internal options in the configuration reference.
(Reported by Francisco Miguel Biete.)
+ Documentation Improvements:
- Add link to PostgreSQL configuration in repository host
section. (Reviewed by Stefan Fercot. Suggested by Julien
Cigar.)
+ Test Suite Improvements:
- Add experimental Meson build. (Reviewed by Eli Schwartz, Sam
Bassaly.)
- Allow any path to be passed to the --test-path option.
(Contributed by Andrey Sokolov. Reviewed by David Steele.)
- Fix compile error when DEBUG_EXEC_TIME is defined without
DEBUG. (Contributed by Andrey Sokolov. Reviewed by David
Steele.)
- refreshed patches to apply cleanly again:
- libpq-fe.h_localisation.patch
- use-run-pgbackrest.patch
-------------------------------------------------------------------
Mon Jun 27 12:45:15 UTC 2022 - Bruno Friedmann <bruno@ioda-net.ch>
- update to version 2.39
+ Bug Fixes:
- Fix error thrown from FINALLY() causing an infinite loop.
- Error on all lock failures except another process holding the lock.
+ Features:
- Backup file bundling for improved small file support.
- Verify command to validate the contents of a repository.
- PostgreSQL 15 support.
- Show backup percent complete in info output.
- Auto-select backup for restore command --type=lsn.
- Suppress existing WAL warning when archive-mode-check is disabled.
- Add AWS IMDSv2 support.
+ Improvements:
- Allow repo-hardlink option to be changed after full backup.
- Increase precision of percent complete logging for backup and restore.
- Improve path validation for repo-* commands.
- Improve stop command to honor stanza option.
- Improve error message for invalid repo-azure-key.
- Add hint to check the log on archive-get/archive-push async error.
- Add ClockError for unexpected clock skew and timezone changes.
- Strip extensions from history manifest before showing in error message.
- Add user:group to lock permission error.
+ Documentation Bug Fixes:
- Fix incorrect reference to stanza-update in the user guide.
- Fix example for repo-gcs-key-type option in configuration reference.
- Fix tls-server-auth example and add clarifications.
+ Documentation Improvements:
- Simplify messaging around supported versions in the documentation.
- Add option type descriptions.
- Add FAQ about backup types and restore speed.
- Document required base branch for pull requests.
- update copyright year
-------------------------------------------------------------------
Mon Apr 18 13:47:07 UTC 2022 - Marcus Rueckert <mrueckert@suse.de>
- update to version 2.38
IMPORTANT NOTE: Repository size reported by the info command is
now entirely based on what pgBackRest has written to storage.
Previously, in certain cases, pgBackRest could detect if
additional compression was being applied by the storage but this
is no longer supported.
- Bug Fixes:
- Retry errors in S3 batch file delete. (Reviewed by Reid
Thompson. Reported by Alex Richman.)
- Allow case-insensitive matching of HTTP connection header
values. (Reviewed by Reid Thompson. Reported by Rémi Vidier.)
- Features:
- Add support for AWS S3 server-side encryption using KMS.
(Contributed by Christoph Berg. Reviewed by David Steele,
Tharindu Amila.)
- Add archive-missing-retry option. (Reviewed by Stefan
Fercot.)
- Add backup type filter to info command. (Contributed by
Stefan Fercot. Reviewed by David Steele.)
- Improvements:
- Retry on page validation failure during backup. (Reviewed by
Stephen Frost, David Christensen.)
- Handle TLS servers that do not close connections gracefully.
(Reviewed by Rémi Vidier, David Christensen, Stephen Frost.)
- Add backup LSNs to info command output. (Contributed by
Stefan Fercot. Reviewed by David Steele.)
- Automatically strip trailing slashes for repo-ls paths.
(Contributed by David Christensen. Reviewed by David Steele.)
- Do not retry fatal errors. (Reviewed by Reid Thompson.)
- Remove support for PostgreSQL 8.3/8.4. (Reviewed by Reid
Thompson, Stefan Fercot.)
- Remove logic that tried to determine additional file system
compression. (Reviewed by Reid Thompson, Stefan Fercot.)
- Documentation Bug Fixes:
- Move repo options in TLS documentation to the global section.
(Reported by Anton Kurochkin.)
- Remove unused backup-standby option from stanza commands.
(Reported by Stefan Fercot.)
- Fix typos in help and release notes. (Fixed by Daniel
Gustafsson. Reviewed by David Steele.)
- Documentation Improvements:
- Add aliveness check to systemd service configuration.
(Suggested by Yogesh Sharma.)
- Add FAQ explaining WAL archive suffix. (Contributed by Stefan
Fercot. Reviewed by David Steele.)
- Note that replications slots are not restored. (Contributed
by Reid Thompson. Reviewed by David Steele, Stefan Fercot.
Suggested by Christophe Courtois.)
-------------------------------------------------------------------
Mon Mar 7 21:41:10 UTC 2022 - Marcus Rueckert <mrueckert@suse.de>
- Move lock file default to /run/pgbackrest and make sure it gets
created with user and group postgres
- Add use-run-pgbackrest.patch
- Add README.SUSE
- Track series file to make quilt setup easier
- refresh libpq-fe.h_localisation.patch
-------------------------------------------------------------------
Fri Feb 18 18:01:39 UTC 2022 - Marcus Rueckert <mrueckert@suse.de>
- make sure all unit files have unix line endings
-------------------------------------------------------------------
Fri Feb 18 17:48:11 UTC 2022 - Marcus Rueckert <mrueckert@suse.de>
- add systemd services:
- diff/full/incremental backup
- pgbackrest services for the TLS server
- add pgbackrest.target to restart/stop all sub services
- add Requires(pre) for postgresql-server to make sure the
postgresql user is available for file permissions
- change permissions of the config file from 0644 to 0640 as the
file can contain passwords and encryption keys.
- modernize the spec file
-------------------------------------------------------------------
Tue Jan 25 13:27:08 UTC 2022 - Marcus Rueckert <mrueckert@suse.de>
- enable zstd support
-------------------------------------------------------------------
Tue Jan 25 10:49:49 UTC 2022 - Marcus Rueckert <mrueckert@suse.de>
- update to version 2.37
IMPORTANT NOTE: If the restore command is unable to find a backup
that matches a specified time target then an error will be
thrown, whereas before a warning was logged.
IMPORTANT NOTE: The default TLS server port has not yet been
approved by IANA and is subject to change once the approval
process is complete.
- Bug Fixes:
- Fix restore delta link mapping when path/file already exists.
(Reviewed by Reid Thompson. Reported by Younes Alhroub.)
- Fix socket leak on connection retries. (Reviewed by Reid
Thompson. Reported by James Coleman.)
- Features:
- Add TLS server. (Reviewed by Stephen Frost, Reid Thompson,
Andrew L'Ecuyer.)
- Add --cmd option. (Contributed by Reid Thompson. Reviewed by
Stefan Fercot, David Steele. Suggested by Virgile CREVON.)
- Improvements:
- Check archive immediately after backup start. (Reviewed by
Reid Thompson, David Christensen.)
- Add timeline and checkpoint checks to backup. (Reviewed by
Stefan Fercot, Reid Thompson.)
- Check that clusters are alive and correctly configured during
a backup. (Reviewed by Stefan Fercot.)
- Error when restore is unable to find a backup to match the
time target. (Reviewed by Reid Thompson, Douglas J Hunley.
Suggested by Douglas J Hunley.)
- Parse protocol/port in S3/Azure endpoints. (Contributed by
Reid Thompson. Reviewed by David Steele.)
- Add warning when checkpoint_timeout exceeds db-timeout.
(Contributed by Stefan Fercot. Reviewed by David Steele.)
- Add verb to HTTP error output. (Contributed by Christoph
Berg. Reviewed by David Steele.)
- Allow y/n arguments for boolean command-line options.
(Contributed by Reid Thompson. Reviewed by David Steele.)
- Make backup size logging exactly match info command output.
(Contributed by Reid Thompson. Reviewed by David Steele.
Suggested by Mahomed Hussein.)
- Documentation Improvements:
- Display size option default and allowed values with
appropriate units. (Reviewed by Reid Thompson.)
- Fix typos and improve documentation for the
tablespace-map-all option. (Reviewed by Reid Thompson.
Suggested by Reid Thompson.)
- Remove obsolete statement about future multi-repository
support. (Suggested by David Christensen.)
-------------------------------------------------------------------
Sat Dec 4 16:36:19 UTC 2021 - Bruno Friedmann <bruno@ioda-net.ch>
- update to version 2.36
+ Bug Fixes:
- Allow "global" as a stanza prefix.
- Fix segfault on invalid GCS key file.
+ Improvements:
- Allow link-map option to create new links.
- Increase max index allowed for pg/repo options to 256.
- Add WebIdentity authentication for AWS S3.
- Report backup file validation errors in backup.info.
- Add recovery start time to online backup restore log.
- Report original error and retries on local job failure.
- Rename page checksum error to error list in info text output.
- Add hints to standby replay timeout message.
- update to version 2.35 Binary protocol
** IMPORTANT NOTE **: The log level for copied files in the
backup/restore commands has been changed to detail. This makes
the info log level less noisy but if these messages are required
then set the log level for the backup/restore commands to detail.
+ Bug Fixes:
- Detect errors in S3 multi-part upload finalize.
- Fix detection of circular symlinks.
- Only pass selected repo options to the remote.
+ Improvements:
- Binary protocol.
- Automatically create data directory on restore.
- Allow restore --type=lsn.
- Change level of backup/restore copied file logging to detail.
- Loop while waiting for checkpoint LSN to reach replay LSN.
- Log backup file total and restore size/file total.
+ Documentation Bug Fixes:
- Fix incorrect host names in user guide.
+ Documentation Improvements:
- Update contributing documentation and add pull request template.
- Rearrange backup documentation in user guide.
- Clarify restore --type behavior in command reference.
- Fix documentation and comment typos.
+ Test Suite Improvements:
- Add check for test path inside repo path.
- Add CodeQL static code analysis.
- Update tests to use standard patterns.
- packaging:
+ Added new build requirement libyaml-devel
-------------------------------------------------------------------
Tue Jul 27 15:07:25 UTC 2021 - Predrag Ivanović <predivan@mts.rs>
- update to version 2.34 with Postgresql-14 support
+ Bug Fixes:
- Fix issues with leftover spool files from a prior restore.
- Fix issue when checking links for large numbers of tablespaces.
- Free no longer needed remotes so they do not timeout during restore.
- Fix help when a valid option is invalid for the specified command.
+ Features:
- Add PostgreSQL 14 support.
- Add automatic GCS authentication for GCE instances.
- Add repo-retention-history option to expire backup history.
- Add db-exclude option.
+ Improvements:
- Change archive expiration logging from detail to info level.
- Remove stanza archive spool path on restore.
- Do not write files atomically or sync paths during backup copy.
+ Documentation Improvements:
- Update contributing documentation.
- Clarify that repo-s3-role is not an ARN.
-------------------------------------------------------------------
Thu Apr 29 09:33:00 UTC 2021 - Bruno Friedmann <bruno@ioda-net.ch>
- update to version 2.33 with Multi-Repository and GCS Support
+ Bug Fixes:
- Fix option warnings breaking async archive-get/archive-push.
- Fix memory leak in backup during archive copy.
- Fix stack overflow in cipher passphrase generation.
- Fix repo-ls / on S3 repositories.
+ Features:
- Multiple repository support.
- GCS support for repository storage.
- Add archive-header-check option.
+ Improvements:
- Include recreated system databases during selective restore.
- Exclude content-length from S3 signed headers.
- Consolidate less commonly used repository storage options.
- Allow custom config-path default with ./configure --with-configdir.
- Log archive copy during backup.
+ Documentation Improvements:
- Update reference to include links to user guide examples.
- Update selective restore documentation with caveats.
- Add compress-type clarification to archive-copy documentation.
- Add compress-level defaults per compress-type value.
- Add note about required NFS settings being the same as PostgreSQL.
-------------------------------------------------------------------
Thu Feb 25 10:25:04 UTC 2021 - Bruno Friedmann <bruno@ioda-net.ch>
- update to version 2.32
+ Bug Fixes:
- Fix resume after partial delete of backup by prior resume.
+ Features:
- Add repo-ls command.
- Add repo-get command.
- Add archive-mode-check option.
+ Improvements:
- Improve archive-get performance.
+ Documentation Improvements:
- Improve expire command documentation.
- Packaging: spec-cleaner minimal (copyright year, pkgconfig order)
-------------------------------------------------------------------
Sat Dec 26 11:54:52 UTC 2020 - Bruno Friedmann <bruno@ioda-net.ch>
- update to version 2.31
+ Bug Fixes:
- Allow [, #, and space as the first character in database names.
- Create standby.signal only on PostgreSQL 12 when restore type
is standby.
+ Features:
- Expire history files.
- Report page checksum errors in info command text output.
- Add repo-azure-endpoint option.
- Add pg-database option.
+ Improvements:
- Improve info command output when a stanza is specified but
missing.
- Improve performance of large file lists in backup/restore
commands.
- Add retries to PostgreSQL sleep when starting a backup.
+ Documentation Improvements:
Replace RHEL/CentOS 6 documentation with RHEL/CentOS 8.
-------------------------------------------------------------------
Tue Oct 13 12:30:00 UTC 2020 - Bruno Friedmann <bruno@ioda-net.ch>
- update to version 2.30
+ Bug Fixes:
- Error with hints when backup user cannot read pg_settings.
+ Features:
- PostgreSQL 13 support.
+ Improvements:
- Improve PostgreSQL version identification.
- Improve working directory error message.
- Add hint about starting the stanza when WAL segment not found.
- Add hint for protocol version mismatch.
+ Documentation Improvements:
Add note that pgBackRest versions must match when running remotely.
Move info command text to the reference and link to user guide.
Update yum repository path for CentOS/RHEL user guide.
- Packaging
+ Remove non needed perl_requires
+ Allow build on i586 as source are now 100% C
-------------------------------------------------------------------
Thu Sep 10 09:35:27 UTC 2020 - Bruno Friedmann <bruno@ioda-net.ch>
- update to version 2.29 - Auto S3 Credentials on AWS
+ Bug Fixes:
- Suppress errors when closing local/remote processes. Since the
command has completed it is counterproductive to throw an
error but still warn to indicate that something unusual happened.
- Fix issue with = character in file or database names.
+ Features:
- Automatically retrieve temporary S3 credentials on AWS instances.
- Add archive-mode option to disable archiving on restore.
+ Improvements:
- PostgreSQL 13 beta3 support. Changes to the control/catalog/WAL
versions in subsequent betas may break compatibility but
pgBackRest will be updated with each release to keep pace.
- Asynchronous list/remove for S3/Azure storage.
- Improve memory usage of unlogged relation detection in
manifest build.
- Proactively close file descriptors after forking async process.
- Delay backup remote connection close until after archive check.
- Improve detailed error output.
- Improve TLS error reporting.
+ Additional Notes
- Documentation Bug Fixes:
Add none to compress-type option reference and fix example.
Add missing azure type in repo-type option reference.
Fix typo in repo-cipher-type option reference.
- Documentation Improvements:
Clarify that expire must be run regularly when expire-auto
is disabled.
-------------------------------------------------------------------
Wed Aug 19 07:46:40 UTC 2020 - Bruno Friedmann <bruno@ioda-net.ch>
- update to version 2.28 - Azure Repository Storage
+ Bug Fixes:
- Fix restore --force acting like --force --delta. This caused
restore to replace files based on timestamp and size rather
than overwriting, which meant some files that should have been
updated were left unchanged. Normal restore and restore
--delta were not affected by this issue.
+ Features:
- Azure support for repository storage.
- Add expire-auto option. This allows automatic expiration
after a successful backup to be disabled.
+ Improvements:
- Asynchronous S3 multipart upload.
- Automatic retry for backup, restore, archive-get, and archive-push.
- Disable query parallelism in PostgreSQL sessions used for backup control.
- PostgreSQL 13 beta2 support. Changes to the control/catalog/WAL
versions in subsequent betas may break compatibility but
pgBackRest will be updated with each release to keep pace.
- Improve handling of invalid HTTP response status.
- Improve error when pg1-path option missing for archive-get command.
- Add hint when checksum delta is enabled after a timeline switch.
- Use PostgreSQL instead of postmaster where appropriate.
+ Documentation Bug Fixes:
- Fix incorrect example for repo-retention-full-type option.
- Remove internal commands from HTML and man command references.
+ Documentation Improvements:
- Update PostgreSQL versions used to build user guides. Also add
version ranges to indicate that a user guide is accurate for a
range of PostgreSQL versions even if it was built for a
specific version.
- Update FAQ for expiring a specific backup set.
- Update FAQ to clarify default PITR behavior.
-------------------------------------------------------------------
Sat May 30 13:46:41 UTC 2020 - Bruno Friedmann <bruno@ioda-net.ch>
- update to version 2.27 Expiration Improvements Compression Drivers
+ Bug Fixes:
- Fix issue checking if file links are contained in path links.
- Allow pg-path1 to be optional for synchronous archive-push.
- The expire command now checks if a stop file is present.
- Handle missing reason phrase in HTTP response.
- Increase buffer size for lz4 compression flush.
- Ignore pg-host* and repo-host* options for the remote command.
- Fix possibly missing pg1-* options for the remote command.
+ Features:
- Time-based retention for full backups.
The --repo-retention-full-type option allows retention of full
backups based on a time period, specified in days.
- Ad hoc backup expiration. Allow the user to remove a specified
backup regardless of retention settings.
- Zstandard compression support. Note that setting compress-type=zst
will make new backups and archive incompatible (unrestorable)
with prior versions of pgBackRest.
- bzip2 compression support. Note that setting compress-type=bz2
will make new backups and archive incompatible (unrestorable)
with prior versions of pgBackRest.
- Add backup/expire running status to the info command.
+ Improvements:
- Expire WAL archive only when repo-retention-archive threshold
is met. WAL prior to the first full backup was previously
expired after the first full backup. Now it is preserved
according to retention settings.
- Add local MD5 implementation so S3 works when FIPS is enabled.
- PostgreSQL 13 beta1 support. Changes to the control/catalog/WAL
versions in subsequent betas may break compatibility but
pgBackRest will be updated with each release to keep pace.
- Reduce buffer-size default to 1MiB.
- Throw user-friendly error if expire is not run on repository host.
- Packaging : add bz2 buildrequire
-------------------------------------------------------------------
Fri May 1 16:13:03 UTC 2020 - Bruno Friedmann <bruno@ioda-net.ch>
- update to version 2.26 : Non-blocking TLS
+ Bug Fix : Remove empty subexpression from manifest regular
expression. MacOS was not happy about this though other
platforms seemed to work fine.
+ Improvements:
- N on-blocking TLS implementation.
- Only limit backup copy size for WAL-logged files. The prior
behavior could possibly lead to postgresql.conf or
postgresql.auto.conf being truncated in the backup.
- TCP keep-alive options are configurable.
- Add io-timeout option.
- update to version 2.25 : LZ4 Compression Support
+ Features:
- Add lz4 compression support. Note that setting
compress-type=lz4 will make new backups and archive incompatible
(unrestorable) with prior versions of pgBackRest.
- Add --dry-run option to the expire command. Use dry-run to see
which backups/archive would be removed by the expire command
without actually removing anything.
+ Improvements:
- Improve performance of remote manifest build.
- Fix detection of keepalive options on Linux.
- Add configure host detection to set standards flags correctly.
- Remove compress/compress-level options from commands where unused.
- Limit backup file copy size to size reported at backup start.
If a file grows during the backup it will be reconstructed by
WAL replay during recovery so there is no need to copy the
additional data.
- Packaging:
+ Add new requirement lz4
+ Redo patch libpq-fe.h_localisation.patch to include configure
-------------------------------------------------------------------
Tue Mar 24 14:34:27 UTC 2020 - Bruno Friedmann <bruno@ioda-net.ch>
- update to 2.24 version : Bugfix
+ Bug Fixes:
- Prevent defunct processes in asynchronous archive commands.
- Error when archive-get/archive-push/restore are not run on a
PostgreSQL host.
- Read HTTP content to eof when size/encoding not specified.
- Fix resume when the resumable backup was created by Perl. In
this case the resumable backup should be ignored, but the C
code was not able to load the partial manifest written by Perl
since the format differs slightly.
Add validations to catch this case and continue gracefully.
+ Features:
- Auto-select backup set on restore when time target is specified.
Auto-selection is performed only when --set is not specified.
If a backup set for the given target time cannot not be found,
the latest (default) backup set will be used.
+ Improvements:
- Skip pg_internal.init temp file during backup.
- Add more validations to the manifest on backup.
+ Documentation Improvements:
- Prevent lock-bot from adding comments to locked issues.
- Packaging
+ use %autopatch
+ use a normalized name for source %name-%version.tar.gz
+ spec cleaning
+ Refresh patch libpq-fe.h_localisation.patch
+ Delete merged upstream_wrongly_bring_back_pg_config.patch
-------------------------------------------------------------------
Mon Jan 27 20:27:02 UTC 2020 - Bruno Friedmann <bruno@ioda-net.ch>
- update to 2.23 : Bugfix
+ Bug Fixes:
- Fix missing files corrupting the manifest. If a file was
removed by PostgreSQL during the backup (or was missing from
the standby) then the next file might not be copied and updated
in the manifest. If this happened then the backup would error
when restored.
+ Improvements:
- Use pkg-config instead of xml2-config for libxml2 build options.
- Validate checksums are set in the manifest on backup/restore.
- Introduce upstream_wrongly_bring_back_pg_config.patch to fix
upstream code (using pg_config in client code)
Upstream issue #920
-------------------------------------------------------------------
Thu Jan 23 14:26:33 UTC 2020 - Bruno Friedmann <bruno@ioda-net.ch>
- update to 2.22 : Bugfix
+ Fix error in timeline conversion. The timeline is required to
verify WAL segments in the archive after a backup. The conversion
was performed base 10 instead of 16, which led to errors when the
timeline was ≥ 0xA.
- update to 2.21 : C Migration Complete
+ Bug Fixes
- Fix options being ignored by asynchronous commands. The
asynchronous archive-get/archive-push processes were not
loading options configured in command configuration sections,
e.g. [global:archive-get].
- Fix handling of \ in filenames. \ was not being properly
escaped when calculating the manifest checksum which prevented
the manifest from loading. Since instances of \ in cluster
filenames should be rare to nonexistent this does not seem
likely to be a serious problem in the field.
+ Features:
- pgBackRest is now pure C.
- Add pg-user option. Specifies the database user name when
connecting to PostgreSQL. If not specified pgBackRest will
connect with the local OS user or PGUSER, which was the previous
behavior.
- Allow path-style URIs in S3 driver.
+ Improvements:
- The backup command is implemented entirely in C.
- update to 2.20 : Bug fixes
+ Fix archive-push/archive-get when PGDATA is symlinked. These
commands tried to use cwd() as PGDATA but this would disagree
with the path configured in pgBackRest if PGDATA was symlinked.
If cwd() does not match the pgBackRest path then chdir() to the
path and make sure the next cwd() matches the result from the
first call.
+ Fix reference list when backup.info is reconstructed in expire
command. Since the backup command is still using the Perl version
of reconstruct this issue will not express unless 1) there is a
backup missing from backup.info and 2) the expire command is run
directly instead of running after backup as usual. This unlikely
combination of events means this is probably not a problem in the
field.
+ Fix segfault on unexpected EOF in gzip decompression.
- Update and cleanup spec
+ Remove all uneeded Perl related part
+ Update copyright
-------------------------------------------------------------------
Wed Dec 4 13:47:03 UTC 2019 - Bruno Friedmann <bruno@ioda-net.ch>
- update to 2.19 : C Migrations and Bug Fixes
+ Bug Fixes:
- Fix remote timeout in delta restore. When performing a delta
restore on a largely unchanged cluster the remote could timeout
if no files were fetched from the repository within
protocol-timeout. Add keep-alives to prevent remote timeout.
- Fix handling of repeated HTTP headers. When HTTP headers are
repeated they should be considered equivalent to a single
comma-separated header rather than generating an error, which
was the prior behavior.
+ Improvements:
- JSON output from the info command is no longer pretty-printed.
Monitoring systems can more easily ingest the JSON without linefeeds.
External tools such as jq can be used to pretty-print if desired.
- The check command is implemented entirely in C.
+ Documentation Improvements:
- Document how to contribute to pgBackRest.
- Document maximum version for auto-stop option.
+ Test Suite Improvements:
- Fix container test path being used when --vm=none.
- Fix mismatched timezone in expect test.
- Don't autogenerate embedded libc code by default.
- Cleanup spec (license and pkgconfig)
-------------------------------------------------------------------
Sun Oct 6 14:09:55 UTC 2019 - Bruno Friedmann <bruno@ioda-net.ch>
- Update to 2.18 version PostgreSQL 12 Support
+ Features:
- PostgreSQL 12 support.
- Add info command set option for detailed text output.
- Add standby restore type. This automatically adds
standby_mode=on to recovery.conf for PostgreSQL < 12
and creates standby.signal for PostgreSQL ≥ 12, creating a
common interface between PostgreSQL versions.
+ Improvements:
- The restore command is implemented entirely in C.
+ Documentation Improvements:
- Document the relationship between db-timeout and protocol-timeout.
- Add documentation clarifications regarding standby repositories.
- Add FAQ for time-based Point-in-Time Recovery.
- Update to 2.17 version C Migrations and Bug Fixes
+ Bug fixes:
- Improve slow manifest build for very large quantities of
tables/segments.
- Fix exclusions for special files.
+ Improvements:
- The stanza-create/update/delete commands are implemented entirely in C.
- The start/stop commands are implemented entirely in C.
- Create log directories/files with 0750/0640 mode.
+ Documentation Bug Fixes:
- Fix yum.p.o package being installed when custom package specified.
+ Documentation Improvements:
- Build pgBackRest as an unprivileged user.
-------------------------------------------------------------------
Sat Aug 24 16:31:39 UTC 2019 - Bruno Friedmann <bruno@ioda-net.ch>
- Update to 2.16 release C Migrations and Bug Fixes
+ Bug Fixes:
- Retry S3 RequestTimeTooSkewed errors instead of immediately
terminating.
- Fix incorrect handling of transfer-encoding response to HEAD
request.
- Fix scoping violations exposed by optimizations in gcc 9.
+ Features:
- Add repo-s3-port option for setting a non-standard S3
service port.
+ Improvements:
- The local command for backup is implemented entirely in C.
- The check command is implemented partly in C.
- Packaging adding new libpq-fe dependency
- Added patch libpq-fe.h_localisation.patch
-------------------------------------------------------------------
Thu Jul 11 12:09:42 UTC 2019 - Bruno Friedmann <bruno@ioda-net.ch>
- Update to 2.15.1 release
+ Bug Fixes:
Fix archive retention expiring too aggressively.
+ Improvements:
The expire command is implemented entirely in C.
The local command for restore is implemented entirely in C.
Remove hard-coded PostgreSQL user so $PGUSER works.
Honor configure --prefix option.
Rename repo-s3-verify-ssl option to repo-s3-verify-tls.
The new name is preferred because pgBackRest does not support
any SSL protocol versions (they are all considered to be insecure).
The old name will continue to be accepted.
- Packaging:
+ export %optflag as CFLAG
+ fix make install with new supported prefix
-------------------------------------------------------------------
Thu Jun 6 05:59:01 UTC 2019 - Bruno Friedmann <bruno@ioda-net.ch>
- Emergency rollback, 2.14 segv
-------------------------------------------------------------------
Wed Jun 5 15:24:17 UTC 2019 - Bruno Friedmann <bruno@ioda-net.ch>
- Update to 2.14 release
+ Bug Fixes:
Fix segfault when process-max > 8 for archive-push/archive-get.
+ Improvements:
Bypass database checks when stanza-delete issued with force.
Add configure script for improved multi-platform support.
+ Documentation Features:
Add user guides for CentOS/RHEL 6/7.
- 2.13 release
+ Bug Fixes:
Fix zero-length reads causing problems for IO filters that
did not expect them.
Fix reliability of error reporting from local/remote processes.
Fix Posix/CIFS error messages reporting the wrong filename on
write/sync/close.
- 2.12 release
+ IMPORTANT NOTE: The new TLS/SSL implementation forbids dots in
S3 bucket names per RFC-2818. This security fix is required for
compliant hostname verification.
+ Bug Fixes:
Fix issues when a path option is / terminated.
Fix issues when log-level-file=off is set for the archive-get
command.
Fix C code to recognize host:port option format like Perl does.
Fix issues with remote/local command logging options.
+ Improvements:
The archive-push command is implemented entirely in C.
Increase process-max limit to 999.
Improve error message when an S3 bucket name contains dots.
+ Documentation Improvements:
Clarify that S3-compatible object stores are supported.
- Packaging: add autoconf upstream is now using configure.
-------------------------------------------------------------------
Mon Mar 11 09:10:56 UTC 2019 - Bruno Friedmann <bruno@ioda-net.ch>
- Update to 2.11 release
+ C Implementation of Archive Get
+ Bug Fixes:
- Fix possible truncated WAL segments when an error occurs
mid-write.
- Fix info command missing WAL min/max when stanza specified.
- Fix non-compliant JSON for options passed from C to Perl.
+ Improvements:
- The archive-get command is implemented entirely in C.
- Enable socket keep-alive on older Perl versions.
- Error when parameters are passed to a command that does not
accept parameters.
- Add hints when unable to find a WAL segment in the archive.
- Improve error when hostname cannot be found in a
certificate.
- Add additional options to backup.manifest for debugging
purposes.
+ Documentation Improvements:
- Update default documentation version to PostgreSQL 10.
- Packaging:
+ Remove merge upstream patch (2cd204f.patch)
+ Fix install destination to %{_bindir}
-------------------------------------------------------------------
Wed Feb 20 08:15:24 UTC 2019 - Bruno Friedmann <bruno@ioda-net.ch>
- Include upstream patch 2cd204f.patch to fix issue#677
-------------------------------------------------------------------
Sun Feb 17 10:02:49 UTC 2019 - Bruno Friedmann <bruno@ioda-net.ch>
- Update to 2.10 version bug fixes
+ Add unimplemented S3 driver method required for archive-get.
+ Fix check for improperly configured pg-path.
- Packaging:
+ Fix trailing space in changes (jengelh)
+ Use a factual description (jengelh)
-------------------------------------------------------------------
Fri Feb 8 20:02:00 UTC 2019 - Bruno Friedmann <bruno@ioda-net.ch>
- Update to 2.09 version bug fixes and improvements
+ Fix issue with multiple async status files causing a hard error.
+ info command is implemented entirely in C.
+ Simplify info command text message when no stanzas are present
by replacing the repository path with "the repository".
+ Add _DARWIN_C_SOURCE flag to Makefile for MacOS builds.
+ Update address lookup in C TLS client to use modern methods.
+ Include Posix-compliant header for strcasecmp() and fd_set.
- Packaging: remove comments/remark fixed and merged issue #659
-------------------------------------------------------------------
Sat Jan 26 10:00:00 UTC 2019 - Bruno Friedmann <bruno@ioda-net.ch>
- Update to 2.08 version : bug fixes and improvement
See more information https://pgbackrest.org/release.html
- Add libxml2-devel as buildrequires
- Add a comment about gethostbyname() upstream issue #659
- Update spec (date and order)
-------------------------------------------------------------------
Sat Dec 1 08:58:07 UTC 2018 - Bruno Friedmann <bruno@ioda-net.ch>
- Re-add all needed Perl (upstream issue #629): not all the code
is ported to C
-------------------------------------------------------------------
Tue Nov 20 13:36:49 UTC 2018 - Bruno Friedmann <bruno@ioda-net.ch>
- Update to 2.07 version : bug fixes and improvement
See more information https://pgbackrest.org/release.html
-------------------------------------------------------------------
Sat Oct 27 20:12:17 UTC 2018 - Bruno Friedmann <bruno@ioda-net.ch>
- Bug fix and improvement 2.06 version
See more information https://pgbackrest.org/release.html
- Packaging : Remove Requires perl, it not more used
-------------------------------------------------------------------
Wed Oct 3 08:07:18 UTC 2018 - Bruno Friedmann <bruno@ioda-net.ch>
- Bug fix and improvement 2.05 version
See more information https://pgbackrest.org/release.html
-------------------------------------------------------------------
Sat Jul 14 16:25:46 UTC 2018 - bruno@ioda-net.ch
- Fix packaging : Avoid segv backtrace
+ Don't package and distribute perl or LibC
They are already in final binary.
Ref https://github.com/pgbackrest/pgbackrest/issues/558
+ As a result : tests are no more usable, (only vagrant runs)
use a simple call of the binary (pgbackrest version) to exclude
futur backtrace
+ Clean spec: licence and remove macro for file
-------------------------------------------------------------------
Wed Jul 11 07:49:49 UTC 2018 - bruno@ioda-net.ch
- Critical bug fix release 2.04 (Backup Resume)
+ IMPORTANT NOTE: This release fixes a critical bug in the backup
resume feature. All resumed backups prior to this release should
be considered inconsistent.
See more information https://pgbackrest.org/release.html
+ Bug Fixes:
- Fix critical bug in resume that resulted in inconsistent
backups. A regression in v0.82 removed the timestamp comparison
when deciding which files from the aborted backup to keep on
resume.
- Fix error in selective restore when only one user database
exists in the cluster.
- Fix non-compliant ISO-8601 timestamp format in S3 authorization
headers. AWS and some gateways were tolerant of space rather than
zero-padded hours while others were not.
+ Features:
- PostgreSQL 11 Beta 2 support.
+ Improvements:
- Improve the HTTP client to set content-length to 0 when not
specified by the server. S3 (and gateways) always set
content-length or transfer-encoding but HTTP 1.1 does not require
it and proxies (e.g. HAProxy) may not include either.
- Set search_path = 'pg_catalog' on PostgreSQL connections
+ Documentation Improvements:
- Create a new section to describe building pgBackRest and
build on a separate host.
- Add sample S3 policy to restrict bucket privileges.
- Packaging :
+ Explicitly requires all perl deps
+ Define make_build for 42.3 compilation
-------------------------------------------------------------------
Mon May 28 08:21:30 UTC 2018 - bruno@ioda-net.ch
- Urgent fix : add perl as BuildRequires and Requires to force
presence of libperl.so : Otherwise pgbackrest binary can't find
it
- Spec : use %make_build macros
-------------------------------------------------------------------
Wed May 23 09:55:27 UTC 2018 - bruno@ioda-net.ch
- Update release 2.03 version
+ Bug Fixes:
- Fix potential buffer overrun in error message handling.
- Fix archive write lock being taken for the synchronous
archive-get command.
+ Improvements:
- Embed exported C functions and Perl modules directly into
the pgBackRest executable.
- Use time_t instead of __time_t for better portability.
- Print total runtime in milliseconds at command end.
-------------------------------------------------------------------
Thu May 10 10:12:23 UTC 2018 - bruno@ioda-net.ch
- Update to bugfix & improvement 2.02 version
Parallel Asynchronous Archive Get and Configuration Includes
Released May 6, 2018
+ Bug Fixes:
- Fix directory syncs running recursively when only the
specified directory should be synced.
- Fix archive-copy throwing "path not found" error for incr/diff
backups.
- Fix failure in manifest build when two or more files in PGDATA
are linked to the same directory.
- Fix delta restore failing when a linked file is missing.
- Fix rendering of key/value and list options in help.
+ Features:
- Add asynchronous, parallel archive-get. This feature maintains
a queue of WAL segments to help reduce latency when PostgreSQL
requests a WAL segment with restore_command.
- Add support for additional pgBackRest configuration files in the
directory specified by the --config-include-path option.
Add --config-path option for overriding the default base path
of the --config and --config-include-path option.
- Add repo-s3-token option to allow temporary credentials tokens
to be configured. pgBackRest currently has no way to request new
credentials so the entire command (e.g. backup, restore) must
complete before the credentials expire.
+ Improvements:
- Update the archive-push-queue-max, manifest-save-threshold,
and buffer-size options to accept values in KB, MB, GB, TB, PB
where the multiplier is a power of 1024.
- Make backup/restore path sync more efficient. Scanning the
entire directory can be very expensive if there are a lot of
small tables. The backup manifest contains the path list so use
it to perform syncs instead of scanning the backup/restore path
- Show command parameters as well as command options in initial
info log message.
- Rename archive-queue-max option to archive-push-queue-max to
avoid confusion with the new archive-get-queue-max option.
The old option name will continue to be accepted.
+ Documentation Bug Fixes:
- Update docs with 32-bit support and caveats.
32-bit support was added in v1.26.
+ Documentation Improvements:
- Add monitoring examples using PostgreSQL and jq.
- Add example of command section usage to archiving configuration.
- Remove documentation info --output=json as experimental.
- Update out-of-date description for the spool-path option.
+ Test Suite Features:
- Use lcov for C unit test coverage reporting. Switch from
Devel::Cover because it would not report on branch coverage
for reports converted from gcov. Incomplete branch coverage
for a module now generates an error. Coverage of unit tests
is not displayed in the report unless they are incomplete for
either statement or branch coverage.
- Changes of previous 2.01 version from March 6th 2018
+ Bug Fixes:
- Fix --target-action and --recovery-option options being reported
as invalid when restoring with --type=immediate.
- Immediately error when a secure option (e.g. repo1-s3-key) is
passed on the command line. Since pgBackRest would not pass
secure options on to sub-processes an obscure error was thrown.
The new error is much clearer and provides hints about how to fix
the problem. Update command documentation to omit secure options
that cannot be specified on the command-line.
- Fix issue passing --no-config to embedded Perl.
- Fix issue where specifying log-level-stderr > warn would cause a
local/remote process to error on exit due to output found on
stderr when none was expected. The max value for a local/remote
process is now error.
- Fix manifest test in the check command when tablespaces are
present.
+ Improvements:
- Error when multiple arguments are set in the config file for an
option that does not accept multiple arguments.
- Remove extraneous sudo commands from src/Makefile.
+ Documentation Improvements:
- Show index in examples for indexed options, i.e. repo-*, pg-*.
- Simplify table of contents on command page by only listing
commands.
- Remove references to the C library being optional.
+ Test Suite Features:
- Add CentOS/RHEL package builds.
- Use clang for static code analysis. Nothing found initially
except for some functions that should have been marked
__noreturn__.
-------------------------------------------------------------------
Fri Mar 9 15:16:24 UTC 2018 - bruno@ioda-net.ch
- Packaging :
+ modernize spec with spec-cleaner -m
+ remove pgbackrest-release-1.00_datadir.patch pgbackrest is now
written in C
+ Build C binary and lib C
+ Adjust new parameter name in pgbackrest-conf.patch
- Update to new 2.0 version
+ Features:
The archive-push command is now partially coded in C which
allows the PostgreSQL archive_command to run significantly
faster when processing status messages from the asynchronous
archive process. (Reviewed by Cynthia Shang.)
+ Improvements:
- Improve check command to verify that the backup manifest can be
built. (Contributed by Cynthia Shang.)
- Improve performance of HTTPS client. Buffering now takes the
pending bytes on the socket into account (when present) rather
than relying entirely on select(). In some instances the final
bytes would not be flushed until the connection was closed.
- Improve S3 delete performance. The constant S3_BATCH_MAX had
been replaced with a hard-coded value of 2, probably during
testing.
- Allow any non-command-line option to be reset to default on
the command-line. This allows options in pgbackrest.conf to be
reset to default which reduces the need to write new config
files for specific needs.
- The C library is now required. This eliminates conditional
loading and eases development of new library features.
- The pgbackrest executable is now a C binary instead of Perl.
This allows certain time-critical commands (like async
archive-push) to run more quickly.
- Rename db-* options to pg-* and backup-* options to repo-* to
improve consistency. repo-* options are now indexed although
currently only one is allowed.
** This imply you need to revisit your pgbackrest.conf **
- Packaging :
+ Use make install (now fixed upstream) for bin
-------------------------------------------------------------------
Sun Feb 4 17:14:16 UTC 2018 - bruno@ioda-net.ch
- Upgrade to 1.28 bugfix version
+ Bug Fixes:
- Fixed inability to restore a single database contained in a
tablespace using --db-include. (Fixed by Cynthia Shang.)
- Ensure latest db-id is selected on when matching archive.info
to backup.info. This provides correct matching in the event
there are system-id and db-version duplicates
(e.g. after reverting a pg_upgrade).
(Fixed by Cynthia Shang. Reported by Adam K. Sumner.)
- Fixed overly chatty error message when reporting an invalid
command. (Reported by Jason O'Donnell.)
+ Features:
Add stanza-delete command to cleanup unused stanzas.
(Contributed by Cynthia Shang. Suggested by Magnus Hagander.)
+ Improvements:
Improve stanza-create command so that it does not error when
the stanza already exists. (Contributed by Cynthia Shang.)
-------------------------------------------------------------------
Thu Feb 1 13:20:00 UTC 2018 - bruno@ioda-net.ch
- Packaging :
+ Fix wrong requirement of previous version, now use correct
%perl_requires, add openssl-devel for crytpo on libc
+ Add pgbackrest-conf.patch : a minimal working configuration file
+ Build pgbackrest-libc allowing crypto and checksum
+ Added %check section
+ Rework install and file section (copy of pgdg packaging and use
of correct %perl macros
+ Disable build on i586 pgBackRest need perl with 64bit integer
support. see upstream issue
https://github.com/pgbackrest/pgbackrest/issues/478
+ use %_localstatedir/lib as %_sharedstatedir is broken on Leap
42.x and some SLE12
-------------------------------------------------------------------
Fri Jan 26 15:19:05 UTC 2018 - joop.boonen@opensuse.org
- update to 1.27
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.27
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.26
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.25
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.24
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.23
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.22
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.21
- Added missing requirement
-------------------------------------------------------------------
Thu Aug 3 17:42:43 UTC 2017 - mrueckert@suse.de
- update to 1.20
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.20
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.19
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.18
-------------------------------------------------------------------
Tue Mar 21 11:04:04 UTC 2017 - bruno@ioda-net.ch
- update to 1.17
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.17
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.16
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.15
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.14
-------------------------------------------------------------------
Fri Feb 10 00:39:58 UTC 2017 - mrueckert@suse.de
- update to 1.13
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.13
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.12
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.11
-------------------------------------------------------------------
Thu Nov 10 11:09:58 UTC 2016 - mrueckert@suse.de
- update to 1.10
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.10
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.09
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.08
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.07
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.06
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.05
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.04
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.03
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.02
https://github.com/pgbackrest/pgbackrest/releases/tag/release%2F1.01
-------------------------------------------------------------------
Wed May 4 02:46:09 UTC 2016 - mrueckert@suse.de
- added pgbackrest-release-1.00_datadir.patch:
perl libraries installed in the normal search path we dont need
this anymore.
-------------------------------------------------------------------
Wed May 4 02:26:45 UTC 2016 - mrueckert@suse.de
- update to 1.00
