File sysvinit.spec of Package sysvinit
#
# spec file for package sysvinit (Version 2.86)
#
# Copyright (c) 2010 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.
# Please submit bugfixes or comments via http://bugs.opensuse.org/
#
# norootforbuild
Name: sysvinit
%define MGVER 0.9.6s
%define PDVER 2.0.2
%define KPVER 2.13
%define SCVER 1.09
%define SIVER 2.86
%define START 0.52
License: GPL v2 or later
Group: System/Base
PreReq: coreutils
AutoReqProv: on
Version: 2.86
Release: 186.<RELEASE18>
Summary: SysV-Style init
BuildRoot: %{_tmppath}/%{name}-%{version}-build
BuildRequires: libselinux-devel libsepol-devel
Source: sysvinit-2.86.tar.bz2
Source2: killproc-2.13.tar.bz2
Source3: powerd-2.0.2.tar.bz2
Source4: showconsole-1.09.tar.bz2
Source5: startpar-0.52.tar.bz2
Source6: rc.powerd
Source7: sysvinit-rpmlintrc
Source8: mkinitrd-boot.sh
Source9: mkinitrd-kill1.sh
Source10: mkinitrd-kill2.sh
Patch: sysvinit-2.86.dif
Patch1: sysvinit-2.86-nfs4pidof.patch
Patch2: powerd-2.0.2.dif
Patch3: killproc-2.13.dif
Patch5: sysvinit-2.86-sulogin.patch
Patch6: sysvinit-2.82-startstop.patch
Patch7: sysvinit-2.85-suse.patch
Patch8: sysvinit-2.85-paths.patch
Patch9: sysvinit-2.86-utmp.patch
Patch10: showconsole-1.09.dif
Patch11: sysvinit-2.86-race.patch
Patch12: sysvinit-2.86-lib64.patch
Patch13: sysvinit-2.82-multiline.patch
Patch14: startpar-0.52.dif
Patch15: sysvinit-2.86-usage-message.patch
Patch16: sysvinit-2.86-full-time.patch
Patch17: sysvinit-2.86-hddown.patch
Patch18: sysvinit-2.86-selinux.patch
Patch19: sysvinit-2.86-fuse-no-kill.patch
%description
System V style init programs by Miquel van Smoorenburg that control the
booting and shutdown of your system. These support a number of system
runlevels, each one associated with a specific set of utilities. For
example, the normal system runlevel is 3, which starts a getty on
virtual consoles tty1-tty6. Runlevel 5 starts xdm. Runlevel 0 shuts
down the system. See the individual man pages for inittab, initscript,
halt, init, killproc, killall5, powerd, reboot, runlevel, shutdown, and
telinit for more information.
Authors:
--------
Miquel van Smoorenburg <miquels@drinkel.ow.nl>
Florian La Roche <florian@suse.de>
Werner Fink <werner@suse.de>
%prep
%setup -q -b 2 -b 3 -b 4 -b 5
%patch -P 1 -b .nfs4pidof
%patch -P 5 -b .sulogin
%patch -P 6 -b .ststdmn
%patch -P 7 -b .suse
%patch -P 8 -b .paths
%patch -P 9 -b .utmp
%patch -P 11 -b .race
%patch -P 12 -b .lib64
%patch -P 13 -b .multiline
%patch -P 15 -b .usage
%patch -P 16 -b .fulltime
%patch -P 17 -b .hddown
%patch -P 18 -b .selinux
%patch -P 19 -b .fuse
%patch
pushd ../powerd-%{PDVER}
%patch -P 2
popd
pushd ../killproc-%{KPVER}
%patch -P 3
popd
pushd ../showconsole-%{SCVER}
%patch -P 10
popd
pushd ../startpar-%{START}
%patch -P 14
popd
%_fixowner .
%_fixgroup .
/bin/chmod -Rf a+rX,g-w,o-w .
%build
RPM_OPT_FLAGS="${RPM_OPT_FLAGS} -D_FILE_OFFSET_BITS=64"
export RPM_OPT_FLAGS
CFLAGS="-Wall ${RPM_OPT_FLAGS} -D_GNU_SOURCE -D__NO_STRING_INLINES -pipe"
CC=gcc
make -C src CFLAGS="$CFLAGS" CC="$CC"
pushd contrib/
$CC $CFLAGS -o start-stop-daemon start-stop-daemon.c
popd
pushd ../showconsole-%{SCVER}
make
popd
pushd ../killproc-%{KPVER}
make INC="-I../showconsole-%{SCVER} -L../showconsole-%{SCVER}"
popd
pushd ../powerd-%{PDVER}
%ifnarch s390 s390x
./configure --prefix= --bindir='$(DESTDIR)/sbin' \
--mandir='$(DESTDIR)%{_mandir}' \
--sbindir='$(DESTDIR)/sbin'
make CFLAGS="-I../sysvinit-%{version}/src $CFLAGS"
%endif
popd
pushd ../startpar-%{START}
make CFLAGS="$CFLAGS"
popd
%install
rm -rf ${RPM_BUILD_ROOT}
mkdir ${RPM_BUILD_ROOT}
mkdir -m 755 -p ${RPM_BUILD_ROOT}/bin
mkdir -m 755 -p ${RPM_BUILD_ROOT}/dev
mkdir -m 755 -p ${RPM_BUILD_ROOT}/etc
mkdir -m 755 -p ${RPM_BUILD_ROOT}/sbin
mkdir -m 755 -p ${RPM_BUILD_ROOT}/usr/bin
mkdir -m 755 -p ${RPM_BUILD_ROOT}/usr/include
mkdir -m 755 -p ${RPM_BUILD_ROOT}%{_mandir}/man1
mkdir -m 755 -p ${RPM_BUILD_ROOT}%{_mandir}/man5
mkdir -m 755 -p ${RPM_BUILD_ROOT}%{_mandir}/man8
make install -C src MANPATH=%{_mandir} ROOT=${RPM_BUILD_ROOT}
install contrib/start-stop-daemon ${RPM_BUILD_ROOT}/sbin/
test -p ${RPM_BUILD_ROOT}/dev/initctl || {
rm -f ${RPM_BUILD_ROOT}/dev/initctl
mknod ${RPM_BUILD_ROOT}/dev/initctl p
chmod 600 ${RPM_BUILD_ROOT}/dev/initctl
}
pushd ../showconsole-%{SCVER}
make install MANPATH=%{_mandir} INSTBINFLAGS="-m 0700" DESTDIR=${RPM_BUILD_ROOT}
popd
pushd ../killproc-%{KPVER}
make install MANPATH=%{_mandir} INSTBINFLAGS="-m 0755" DESTDIR=${RPM_BUILD_ROOT}
popd
pushd ../powerd-%{PDVER}
%ifnarch s390 s390x
make install DESTDIR=${RPM_BUILD_ROOT}
cp README README.powerd
cp SUPPORTED SUPPORTED.powerd
cp FAQ FAQ.powerd
echo '# ' > ${RPM_BUILD_ROOT}/etc/powerd.conf
echo '# /etc/powerd.conf for powerd version-2.02' >> ${RPM_BUILD_ROOT}/etc/powerd.conf
echo '# ' >> ${RPM_BUILD_ROOT}/etc/powerd.conf
echo '# read manual page of detectups(8) and powerd(8) its self.' >> ${RPM_BUILD_ROOT}/etc/powerd.conf
echo '# ' >> ${RPM_BUILD_ROOT}/etc/powerd.conf
mkdir -p ${RPM_BUILD_ROOT}/etc/init.d
install -m 0744 %{SOURCE6} ${RPM_BUILD_ROOT}/etc/init.d/powerd
%endif
popd
pushd ../startpar-%{START}
make install DESTDIR=${RPM_BUILD_ROOT}
popd
#
# Install mkinitrd scriptlets
#
install -d $RPM_BUILD_ROOT/lib/mkinitrd/scripts
install -m 0755 %{SOURCE8} $RPM_BUILD_ROOT/lib/mkinitrd/scripts/boot-blogd.sh
install -m 0755 %{SOURCE9} $RPM_BUILD_ROOT/lib/mkinitrd/scripts/boot-killblogd.sh
install -m 0755 %{SOURCE10} $RPM_BUILD_ROOT/lib/mkinitrd/scripts/boot-killblogd2.sh
#
# Remove files not packed:
#
rm -f ${RPM_BUILD_ROOT}/usr/include/{initreq.h,libblogger.h}
rm -f ${RPM_BUILD_ROOT}/usr/lib/libblogger.a
rm -f ${RPM_BUILD_ROOT}%{_mandir}/man1/mesg.1*
%ifarch s390 s390x
rm -f ${RPM_BUILD_ROOT}%{_mandir}/man8/powerd.8*
rm -f ${RPM_BUILD_ROOT}%{_mandir}/man8/detectups.8*
rm -f ${RPM_BUILD_ROOT}/sbin/powerd
rm -f ${RPM_BUILD_ROOT}/sbin/detectups
%endif
chmod 444 ${RPM_BUILD_ROOT}%{_mandir}/man?/*
%post
if test ! -p dev/blog ; then
mknod -m 0640 dev/blog p
fi
if test -x /sbin/telinit -a -p /dev/initctl -a -f /proc/1/exe -a -d /proc/1/root -a ! -d /.build ; then
if test $(stat -Lc '%%D-%%i' /) = $(stat -Lc '%%D-%%i' /proc/1/root) ; then
/sbin/telinit u
fi
fi
[ -x /sbin/mkinitrd_setup ] && mkinitrd_setup
exit 0
%postun
[ -x /sbin/mkinitrd_setup ] && mkinitrd_setup
exit 0
%clean
rm -rf ${RPM_BUILD_ROOT}
%files
%defattr (-,root,root,755)
%ifnarch s390 s390x
%config /etc/powerd.conf
%config /etc/init.d/powerd
%doc ../powerd-%{PDVER}/README.powerd
%doc ../powerd-%{PDVER}/SUPPORTED.powerd
%doc ../powerd-%{PDVER}/FAQ.powerd
%doc ../powerd-%{PDVER}/powerd.conf.monitor
%doc ../powerd-%{PDVER}/powerd.conf.peer
%endif
%doc contrib/start-stop-daemon.README
# %doc contrib/bootlogd.README
%dir /lib/mkinitrd
%dir /lib/mkinitrd/scripts
/lib/mkinitrd/scripts/boot-blogd.sh
/lib/mkinitrd/scripts/boot-killblogd.sh
/lib/mkinitrd/scripts/boot-killblogd2.sh
/dev/initctl
/bin/mountpoint
/bin/pidof
/bin/usleep
/bin/fsync
# /sbin/bootlogd
/sbin/blogger
/sbin/blogd
/sbin/showconsole
/sbin/setconsole
/sbin/isserial
/sbin/checkproc
/sbin/pidofproc
/sbin/halt
/sbin/init
# /sbin/intr
/sbin/killproc
/sbin/killall5
/sbin/pidof
%ifnarch s390 s390x
/sbin/powerd
/sbin/detectups
%endif
/sbin/poweroff
/sbin/reboot
/sbin/runlevel
/sbin/startproc
/sbin/start_daemon
/sbin/shutdown
/sbin/start-stop-daemon
/sbin/sulogin
/sbin/telinit
/sbin/startpar
/sbin/vhangup
/sbin/mkill
/usr/bin/last
/usr/bin/lastb
/usr/bin/utmpdump
# /usr/include/libblogger.h
# /usr/lib/libblogger.a
%doc %{_mandir}/man1/last.1.gz
%doc %{_mandir}/man1/lastb.1.gz
%doc %{_mandir}/man1/usleep.1.gz
%doc %{_mandir}/man1/fsync.1.gz
%doc %{_mandir}/man1/mountpoint.1.gz
# %doc %{_mandir}/man8/bootlogd.8.gz
%doc %{_mandir}/man8/blogger.8.gz
%doc %{_mandir}/man8/blogd.8.gz
%doc %{_mandir}/man8/showconsole.8.gz
%doc %{_mandir}/man8/setconsole.8.gz
%doc %{_mandir}/man8/isserial.8.gz
%doc %{_mandir}/man8/checkproc.8.gz
%doc %{_mandir}/man8/pidofproc.8.gz
%doc %{_mandir}/man8/halt.8.gz
%doc %{_mandir}/man5/initscript.5.gz
%doc %{_mandir}/man5/inittab.5.gz
%doc %{_mandir}/man8/init.8.gz
#%doc %{_mandir}/man8/intr.8.gz
%doc %{_mandir}/man8/killall5.8.gz
%doc %{_mandir}/man8/killproc.8.gz
%doc %{_mandir}/man8/pidof.8.gz
%ifnarch s390 s390x
%doc %{_mandir}/man8/powerd.8.gz
%doc %{_mandir}/man8/detectups.8.gz
%endif
%doc %{_mandir}/man8/poweroff.8.gz
%doc %{_mandir}/man8/reboot.8.gz
%doc %{_mandir}/man8/runlevel.8.gz
%doc %{_mandir}/man8/startproc.8.gz
%doc %{_mandir}/man8/start_daemon.8.gz
%doc %{_mandir}/man8/shutdown.8.gz
%doc %{_mandir}/man8/sulogin.8.gz
%doc %{_mandir}/man8/telinit.8.gz
%doc %{_mandir}/man8/startpar.8.gz
%doc %{_mandir}/man8/vhangup.8.gz
%doc %{_mandir}/man8/mkill.8.gz
%changelog
