File racoon.conf.turnpike of Package novell-ipsec-tools

# $KAME: racoon.conf.in,v 1.18 2001/08/16 06:33:40 itojun Exp $

# "path" must be placed before it should be used.
# You can overwrite which you defined, but it should not use due to confusing.
path include "/etc/racoon";
#include "remote.conf";

# search this file for pre_shared_key with various ID key.
path pre_shared_key "/etc/racoon/psk.txt";

# racoon will look for certificate file in the directory,
# if the certificate/certificate request payload is received.
path certificate "/etc/racoon/cert";

# "log" specifies logging level.  It is followed by either "notify", "debug"
# or "debug2".
log notify;

# "padding" defines some parameter of padding.  You should not touch these.
padding
{
	maximum_length 20;	# maximum padding length.
	randomize off;		# enable randomize length.
	strict_check off;	# enable strict check.
	exclusive_tail off;	# extract last one octet.
}

# if no listen directive is specified, racoon will listen to all
# available interface addresses.
listen
{
	#isakmp ::1 [7000];
	#isakmp 202.249.11.124 [500];
	#admin [7002];		# administrative's port by kmpstat.
	#strict_address; 	# required all addresses must be bound.
	adminsock "/var/run/racoon/racoon.sock" "root" "users" 660;
}

# Specification of default various timer.
timer
{
	# These value can be changed per remote node.
	counter 5;		# maximum trying count to send.
	interval 20 sec;	# maximum interval to resend.
	persend 1;		# the number of packets per a send.

	# timer for waiting to complete each phase.
	phase1 30 sec;
	phase2 15 sec;
}

remote anonymous
{
	nat_traversal on;
	exchange_mode main;
	doi ipsec_doi;
	situation identity_only;

	verify_cert off;
	my_identifier asn1dn;
	certificate_type x509 "usercert.pem" "userkeyunenc.pem";

	nonce_size 16;
	initial_contact on;
	proposal_check obey;	# obey, strict or claim

	proposal {
		encryption_algorithm 3des;
		hash_algorithm md5;
		authentication_method rsasig;
		dh_group 1;
	}
	proposal {
		encryption_algorithm 3des;
		hash_algorithm sha1;
		authentication_method rsasig;
		dh_group 1;
	}
	proposal {
		encryption_algorithm 3des;
		hash_algorithm md5;
		authentication_method rsasig;
		dh_group 1;
	}
	proposal {
		encryption_algorithm 3des;
		hash_algorithm sha1;
		authentication_method rsasig;
		dh_group 1;
	}
	proposal {
		encryption_algorithm des;
		hash_algorithm md5;
		authentication_method rsasig;
		dh_group 1;
	}
	proposal {
		encryption_algorithm des;
		hash_algorithm sha1;
		authentication_method rsasig;
		dh_group 1;
	}
	proposal {
		encryption_algorithm des;
		hash_algorithm md5;
		authentication_method rsasig;
		dh_group 1;
	}
	proposal {
		encryption_algorithm des;
		hash_algorithm sha1;
		authentication_method rsasig;
		dh_group 1;
	}
}

remote ::1 [8000]
{
	#exchange_mode main,aggressive;
	exchange_mode aggressive,main;
	doi ipsec_doi;
	situation identity_only;

	my_identifier user_fqdn "sakane@kame.net";
	peers_identifier user_fqdn "sakane@kame.net";
	#certificate_type x509 "mycert" "mypriv";

	nonce_size 16;
	lifetime time 1 min;	# sec,min,hour

	proposal {
		encryption_algorithm 3des;
		hash_algorithm sha1;
		authentication_method pre_shared_key;
		dh_group 1;
	}
}

sainfo address 203.178.141.209 any address 203.178.141.218 any
{
	pfs_group 2;
	lifetime time 30 sec;
	encryption_algorithm des;
	authentication_algorithm hmac_md5;
	compression_algorithm deflate;
}