File rsyslog.changes of Package rsyslog.import4322
-------------------------------------------------------------------
Thu Mar 24 16:34:31 UTC 2011 - mt@suse.de
- Updated to 5.6.5 (v5-stable) with following bugfixes:
* bugfix: failover did not work correctly if repeated msg
reduction was on.
affected directive: $ActionExecOnlyWhenPreviousIsSuspended on
* bugfix: omlibdbi did not use password from rsyslog.conf
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=203
* bugfix(kind of): tell users that config graph can currently
not be generated
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=232
* bugfix: discard action did not work under some circumstances
fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=217
(bnc#676041)
* bugfix: potential abort condition when $RepeatedMsgReduction
were set to on as well as potentially in a number of other places
where MsgDup() was used. This only happened when the imudp input
module was used and it depended on name resolution not yet had
taken place. (bnc#679030)
* bugfix: fixed a memory leak and potential abort condition
this could happen if multiple rulesets were used and some output
batches contained messages belonging to more than one ruleset.
fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=226
fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=218
* bugfix: memory leak when $RepeatedMsgReduction on was used
bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=225
(bnc#681568)
- Merged systemd socket activation support
-------------------------------------------------------------------
Wed Feb 2 16:47:24 UTC 2011 - mt@suse.de
- update to 5.6.3 (v5-stable) with following bugfixes (digest):
* action processor released mememory too early, resulting in
potential issue in retry cases (very unlikely).
* batch processing flagged invalid message as "bad" under some
circumstances
* unitialized variable could cause issues under extreme
conditions plus some minor nits.
* batches which had actions in error were not properly retried
in all cases
* imfile did duplicate messages under some circumstances
- enabled plain tcp input, unix socket output, last message
parser and the libdbi module as separate package.
- disabled systemd patch for openSUSE <= 11.3
-------------------------------------------------------------------
Thu Jan 20 14:10:59 UTC 2011 - mt@suse.de
- Improved systemd socket activation support to allow multiple
unix sockets and activation in forking mode (bnc#656197).
-------------------------------------------------------------------
Fri Dec 3 16:49:41 UTC 2010 - mt@suse.de
- update to 5.6.2 (v5-stable) with following bugfixes:
* compile failed on systems without epoll_create1()
Thanks to David Hill for providing a fix.
* atomic increment for msg object may not work correct on
all platforms. Thanks to Chris Metcalf for the patch
* replacements for atomic operations for non-int sized types
had problems. At least one instance of that problem could
potentially lead to abort (inside omfile).
- Increased mark frequency in rsyslog.conf to 1 hour
- Enabled duplicate message reduction in rsyslog.conf to catch
at least buggy programs running amok and writting same message
zillion times until the disk gets out of space (bnc#656197).
- Merged rsyslog-systemd-integration.bnc656104.diff (fuzz=0).
-------------------------------------------------------------------
Mon Nov 29 10:32:58 CET 2010 - mt@suse.de
- update to 5.6.1
This release addresses a TLS bug, that has been bothering a lot
of users lately. It stops rsyslog from looping, thus disabling
functionality and bearing the risk of unresponsiveness of the
whole system. Other issues have been fixed for imptcp, failing
testbench, segfault on empty templates and failed compile.
For more detailed information, please review the ChangeLog and
http://bugzilla.adiscon.com/show_bug.cgi?id=194,
http://bugzilla.adiscon.com/show_bug.cgi?id=204,
http://bugzilla.adiscon.com/show_bug.cgi?id=206.
- applied systemd integration base patch (without the service and
socket unit files, because we'll use same for all syslog damons)
extracted from git master (bnc#656104).
-------------------------------------------------------------------
Sat Nov 20 16:15:46 UTC 2010 - coolo@novell.com
- build with libnet-devel on 11.4
-------------------------------------------------------------------
Mon Nov 15 14:59:21 UTC 2010 - chris@computersalat.de
- update to 5.6.0
This release brings all changes and enhancements of the 5.5.x
series to the v5-stable branch.
- bugfix: a couple of problems that imfile had on some platforms,
namely Ubuntu (not their fault, but occured there)
- bugfix: imfile utilizes 32 bit to track offset. Most importantly,
this problem can not experienced on Fedora 64 bit OS (which has
64 bit long's!)
- removed obsolete patch
- xconsole-pipe-loop
- rpmlint
- name-repeated-in-summary C Rsyslog
-------------------------------------------------------------------
Wed Apr 28 17:21:03 UTC 2010 - mt@suse.de
- Added $klogConsoleLogLevel 1 to the config, to use same default
[KERNEL_LOGLEVEL in /etc/sysconfig/syslog] as klogd (bnc#593699).
- Improved filter to discard iptables msgs higher err on console,
changed to set default file template instead per file, removed
duplicate filters (bnc#593699).
-------------------------------------------------------------------
Tue Apr 27 12:01:44 UTC 2010 - mt@suse.de
- Applied fix to avoid a tight send-retry loop in case there is
nobody receiving the messages sent to the xconsole pipe
(bnc#597293, http://bugzilla.adiscon.com/show_bug.cgi?id=186).
- Disabled relp support for < 11.3 (librelp is new)
- Fixed to create /var/run/rsyslog in post-install (rpmlint)
-------------------------------------------------------------------
Wed Apr 14 12:16:29 UTC 2010 - mrueckert@suse.de
- dropped install_all_modules_in_lib conditional and all related
code
- new subpackages
- enable RELP support. new depdendency librelp
- enable diagnotic tools.
- enable UDP spoof support. new dependency libnet
- moved module paths to 2 variables defined on top of the spec
-------------------------------------------------------------------
Tue Apr 13 08:56:15 UTC 2010 - mt@suse.de
- Updated to rsyslog version 5.4.0 (v5-stable). This version begins
a new stable series based on the 5.3.x series, which has been
proven rather well in practice. The new 5.4.0 contains fixes for
all known problems. See ChangeLog file for a detailed history.
The main new feature is speed: several optimizations were done,
including support for epoll in tcp listeners.
- Added new lmzlibw.so and omruleset.so to the file list.
- Recompressed original tar.gz source archive using bzip2.
-------------------------------------------------------------------
Wed Sep 9 21:36:16 CEST 2009 - mt@suse.de
- Added read-only RSYSLOGD_NATIVE_VERSION sysconfig/syslog variable,
that is set to the native mode version number for the -c parameter
while every installation and used in the /etc/init.d/syslog script,
except the user overrides this default in RSYSLOGD_COMPAT_VERSION.
-------------------------------------------------------------------
Wed Sep 2 20:15:28 CEST 2009 - mt@suse.de
- Updated to rsyslog version 4.4.1 (v4-stable), a bug-fixing release,
providing some important fixes for issues that have only been
detected after the beta phase. Some of them are serious (like a
segfault when UDP messageforwarding is activated), so users of
4.4.0 are urged to upgrade to this release. Changelog for 4.4.1:
* features requiring Java are automatically disabled if Java
is not present (thanks to Michael Biebl for his help!)
* bugfix: invalid double-quoted PRI, among others in outgoing
messages. This causes grief with all receivers.
Bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=147
* bugfix: Java testing tools were required, even if testbench
was disabled. This resulted in build errors if no Java was
present on the build system, even though none of the selected
option actually required Java. (I forgot to backport a similar
fix to newer releases).
* bugfix (backport): omfwd segfault. Note that the orginal (higher
version) patch states this happens only when debugging mode is
turned on. That statement is wrong: if debug mode is turned off,
the message is not being emitted, but the division by zero in
the actual parameters still happens.
- Removed jave2-devel-packages from build requires again
-------------------------------------------------------------------
Tue Sep 1 11:34:12 CEST 2009 - mt@suse.de
- Updated to rsyslog version 4.4.0, the actual stable 4.4.x series.
It provides several bugfixes, performance improvements and new
features: It adds generic network stream server for syslog, the
capability to rebind the send socket of the UDP output section,
allows multiple tcp listeners, multiple recipients in ommail,
new plugins as omprog, improved documentation and testbench
with a config switch. Please review ChangeLog file for details.
- Removed obsolete moddirs patch (included in 4.4.0)
- Added java2-devel-packages to BuildRequires (for test suite)
- Enabled omprog and omtemplate plugins, added them and the
lmstrmsrv plugin to the base-plugins file list.
-------------------------------------------------------------------
Mon Apr 20 17:35:16 CEST 2009 - mt@suse.de
- Improved config file comments about usage of additional
modules provided in separate rsyslog-module packages.
- Enabled GnuTLS (syslog-transport-tls) support module.
-------------------------------------------------------------------
Mon Apr 20 13:32:03 CEST 2009 - mt@suse.de
- Updated to rsyslog 3.20.6 [v3-stable]
-------------------------------------------------------------------
Mon Dec 15 14:51:08 CET 2008 - mt@suse.de
- Security fix to honor $AllowedSender settings (bnc#457273).
- Security fix [DoS] from 3.20.2 to emit a discard message every
minute only (when DisallowWarning enabled) instead of every time;
this prevernts an attacker can fill the disk (bnc#457273).
-------------------------------------------------------------------
Wed Sep 10 15:11:05 CEST 2008 - schwab@suse.de
- Run autoreconf.
-------------------------------------------------------------------
Tue Sep 9 16:16:14 CEST 2008 - mt@suse.de
- Enabled mail, imfile and imtemplate modules
- Enabled snmp module, packaged as rsyslog-module-snmp
- Added patch to support multiple module directories,
in our case /lib[64]/rsyslog:/usr/lib[64]/rsyslog
-------------------------------------------------------------------
Thu Sep 4 15:15:14 CEST 2008 - mt@suse.de
- initial rsyslog 3.18.3 package
