File smp_utils.spec of Package smp_utils

Overview Repositories Revisions Requests Users Attributes Meta

File smp_utils.spec of Package smp_utils (Revision 19bc87d421ea3139e0258e0e4320fc3a)

Currently displaying revision 19bc87d421ea3139e0258e0e4320fc3a , Show latest

#
# spec file for package smp_utils (Version 0.93)
#
# Copyright (c) 2008 SUSE LINUX Products GmbH, Nuernberg, Germany.
# This file and all modifications and additions to the pristine
# package are under the same license as the package itself.
#
# Please submit bugfixes or comments via http://bugs.opensuse.org/
#

# norootforbuild

Name:           smp_utils
%define smputver	0.93
License:        BSD 3-Clause; GPL v2 or later
Group:          Hardware/Other
AutoReqProv:    on
Conflicts:      scsi
Version:        0.93
Release:        2
Summary:        Utilities for the SAS Management Protocol (SMP)
Source:         http://sg.torque.net/sg/p/smp_utils-%{smputver}.tar.bz2
Patch1:         smp_utils-Makefile.diff
Patch2:         %{name}-compile-fixes
BuildRoot:      %{_tmppath}/%{name}-%{version}-build

%description
The smp_utils package contains utilities for the Serial Attached SCSI
(SAS) Management Protocol (SMP).  Most utilities correspond to a single
SMP function, sending out a request, checking for errors and if all is
well processing the response. The response is either decoded, printed
out in ASCII hexadecimal or sent as binary to stdout.

Authors:
--------
    Doug Gilbert <dgilbert@interlog.com>

%prep
%setup
%patch1 -p1
%patch2 -p1

%build
# None of these is performance-critical, so use -Os rather than -O2:
export RPM_OPT_FLAGS=`echo $RPM_OPT_FLAGS | sed 's/\-O2/-Os/'`
make CC=gcc PREFIX=%{_prefix} RPM_OPT_FLAGS="$RPM_OPT_FLAGS"

%install
make install DESTDIR=$RPM_BUILD_ROOT PREFIX=%{_prefix} MANDIR=$RPM_BUILD_ROOT/%{_mandir}

%files
%defattr(-,root,root)
# smp_utils
%doc README ChangeLog
%doc doc/*.html
%{_bindir}/smp_conf_route_info
%{_bindir}/smp_discover
%{_bindir}/smp_discover_list
%{_bindir}/smp_phy_control
%{_bindir}/smp_phy_test
%{_bindir}/smp_read_gpio
%{_bindir}/smp_rep_general
%{_bindir}/smp_rep_manufacturer
%{_bindir}/smp_rep_phy_err_log
%{_bindir}/smp_rep_phy_sata
%{_bindir}/smp_rep_route_info
%{_bindir}/smp_write_gpio
%{_bindir}/smp_conf_general
%{_bindir}/smp_rep_exp_route_tbl
%{_mandir}/man8/smp_conf_route_info.8.gz
%{_mandir}/man8/smp_discover.8.gz
%{_mandir}/man8/smp_discover_list.8.gz
%{_mandir}/man8/smp_phy_control.8.gz
%{_mandir}/man8/smp_phy_test.8.gz
%{_mandir}/man8/smp_read_gpio.8.gz
%{_mandir}/man8/smp_rep_general.8.gz
%{_mandir}/man8/smp_rep_manufacturer.8.gz
%{_mandir}/man8/smp_rep_phy_err_log.8.gz
%{_mandir}/man8/smp_rep_phy_sata.8.gz
%{_mandir}/man8/smp_rep_route_info.8.gz
%{_mandir}/man8/smp_utils.8.gz
%{_mandir}/man8/smp_write_gpio.8.gz
%{_mandir}/man8/smp_conf_general.8.gz
%{_mandir}/man8/smp_rep_exp_route_tbl.8.gz

%clean
test ! -z "$RPM_BUILD_ROOT" -a "$RPM_BUILD_ROOT" != "/" && rm -rf $RPM_BUILD_ROOT
rm -rf $RPM_BUILD_DIR/smp_utils-%{smputver}

%changelog
* Thu Apr 24 2008 hare@suse.de
- Split off from original scsi package.

Places

File smp_utils.spec of Package smp_utils (Revision 19bc87d421ea3139e0258e0e4320fc3a)

Places