Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
openSUSE:Factory
apptainer
apptainer.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File apptainer.changes of Package apptainer
------------------------------------------------------------------- Fri Mar 15 11:20:14 UTC 2024 - Christian Goll <cgoll@suse.com> - Updated apptainer to version 1.3.0 * FUSE mounts are now supported in setuid mode, enabling full functionality even when kernel filesystem mounts are insecure due to unprivileged users having write access to raw filesystems in containers. When allow `setuid-mount extfs = no` (the default) in apptainer.conf, then the fuse2fs image driver will be used to mount ext3 images in setuid mode instead of the kernel driver (ext3 images are primarily used for the `--overlay` feature), restoring functionality that was removed by default in Apptainer 1.1.8 because of the security risk. The allow `setuid-mount squashfs` configuration option in `apptainer.conf` now has a new default called `iflimited` which allows kernel squashfs mounts only if there is at least one `limit container` option set or if Execution Control Lists are activated in ecl.toml. If kernel squashfs mounts are are not allowed, then the squashfuse image driver will be used instead. `iflimited` is the default because if one of those limits are used the system administrator ensures that unprivileged users do not have write access to the containers, but on the other hand using FUSE would enable a user to theoretically bypass the limits via `ptrace()` because the FUSE process runs as that user. The `fuse-overlayfs` image driver will also now be tried in setuid mode if the kernel overlayfs driver does not work (for example if one of the layers is a FUSE filesystem). In addition, if `allow setuid-mount encrypted = no` then the unprivileged gocryptfs format will be used for encrypting SIF files instead of the kernel device-mapper. If a SIF file was encrypted using the gocryptfs format, it can now be mounted in setuid mode in addition to non-setuid mode. * Change the default in user namespace mode to use either kernel overlayfs or fuse-overlayfs instead of the underlay feature for the purpose of adding bind mount points. That was already the default in setuid mode; this change makes it consistent. The underlay feature can still be used with the `--underlay` option, but it is deprecated because the implementation is complicated and measurements have shown that the performance of underlay is similar to overlayfs and fuse-overlayfs. For now the underlay feature can be made the default again with a new `preferred` value on the `enable underlay` configuration option. Also the `--underlay` option can be used in setuid mode or as the root user, although it was ignored previously. * Prefer again to use kernel overlayfs over fuse-overlayfs when a lower layer is FUSE and there's no writable upper layer, undoing the change from 1.2.0. Another workaround was found for the problem that change addressed. This applies in both setuid mode and in user namespace mode. * `--cwd` is now the preferred form of the flag for setting the container's working directory, though `--pwd` is still supported for compatibility. * The way `--home` is handled when running as root (e.g. sudo apptainer) or with `--fakeroot` has changed. Previously, we were only modifying the `HOME` environment variable in these cases, while leaving the container's `/etc/passwd` file unchanged (with its homedir field pointing to `/root`, regardless of the value passed to `--home`). With this change, both value of HOME and the contents of `/etc/passwd` in the container will reflect the value passed to `--home` if the container is readonly. If the container is writable, the `/etc/passwd` file is left alone because it can interfere with commands that want to modify it. * The `--vm` and related flags to start apptainer inside a VM have been removed. This functionality was related to the retired Singularity Desktop / SyOS projects. * The keyserver-related commands that were under `remote` have been moved to their own, dedicated `keyserver` command. Run `apptainer help keyserver` for more information. * The commands related to OCI/Docker registries that were under `remote` have been moved to their own, dedicated `registry` command. Run `apptainer help registry` for more information. * The the `remote list` subcommand now outputs only remote endpoints (with keyservers and OCI/Docker registries having been moved to separate commands), and the output has been streamlined. * Adding a new remote endpoint using the `apptainer remote add` command will now set the new endpoint as default. This behavior can be suppressed by supplying the `--no-default` (or `-n`) flag to `remote add`. * Skip parsing build definition file template variables after comments beginning with a hash symbol. * The global `/tmp` directory is no longer used for gocryptfs mountpoints. - New Features & Functionality * The `remote status` command will now print the username, realname, and email of the logged-in user, if available. * Add monitoring feature support, which requires the usage of an additional tool named `apptheus`, this tool will put apptainer starter into a newly created cgroup and collect system metrics. * A new `--no-pid` flag for `apptainer run/shell/exec` disables the PID namespace inferred by `--containall` and `--compat`. * Added `--config` option to `keyserver` commands. * Honor an optional remoteName argument to the `keyserver list` command. * Added the `APPTAINER_ENCRYPTION_PEM_DATA` env var to allow for encrypting and running encrypted containers without a PEM file. * Adding `--sharens` mode for `apptainer exec/run/shell`, which enables to run multiple apptainer instances created by the same parent using the same image in the same user namespace. - Make 'gocryptfs' an optional dependency. - Make apptainer definition templates version dependent. ------------------------------------------------------------------- Wed Mar 13 19:28:40 UTC 2024 - Egbert Eich <eich@suse.com> - Fix 'apptainer build' using signed packages from the SUSE Registry (bsc#1221364). * Remove-signatures-from-Docker-images.patch ------------------------------------------------------------------- Wed Jan 31 14:14:20 UTC 2024 - Egbert Eich <eich@suse.com> - Updated apptainer to version 1.2.5 * Added `libnvidia-nvvm` to `nvliblist.conf`. Newer NVIDIA Drivers (known with >= 525.85.05) require this lib to compile OpenCL programs against NVIDIA GPUs, i.e. `libnvidia-opencl` depends on `libnvidia-nvvm`. * Disable the usage of cgroup in instance creation when `--fakeroot` is passed. * Disable the usage of cgroup in instance creation when `hidepid` mount option on `/proc` is set. * Fixed a regression introduced in 1.2.0 where the user's password file information was not copied in to the container when there was a parent root-mapped user namespace (as is the case for example in `cvmfsexec`). * Added the upcoming NVIDIA driver library `libnvidia-gpucomp.so` to the list of libraries to add to NVIDIA GPU-enabled containers. Fixed missing error handling during the creation of an encrypted image that lead to the generation of corrupted images. * Use `APPTAINER_TMPDIR` for temporary files during privileged image encryption. * If rootless unified cgroups v2 is available when starting an image but `XDG_RUNTIME_DIR` or `DBUS_SESSION_BUS_ADDRESS` is not set, print an info message that stats will not be available instead of exiting with a fatal error. * Allow templated build arguments to definition files to have empty values. - Package .def templates separately for different SPs. ------------------------------------------------------------------- Tue Oct 24 06:02:44 UTC 2023 - Egbert Eich <eich@suse.com> - Do not build squashfuse, require it as a dependency. Removed: squashfuse-0.1.105.tar.gz, 70.patch - Replace awkward 'Obsoletes: singularity-*' as well as the 'Provides: Singularity' by 'Conflicts:' and drop the provides - the versioning scheme does not match and we do not automatically migrate from one to the other. - Exclude platforms which do not provide all build dependencies. ------------------------------------------------------------------- Wed Sep 27 10:17:11 UTC 2023 - Christian Goll <cgoll@suse.com> - removed CRYPTOGAMS license as not known in OBS and OpenSSL is also valid ------------------------------------------------------------------- Mon Sep 25 08:57:57 UTC 2023 - Christian Goll <cgoll@suse.com> - updated to 1.2.3 with following changes: * The apptainer push/pull commands now show a progress bar for the oras protocol like there was for docker and library protocols. * The --nv and --rocm flags can now be used simultaneously. * Fix the use of APPTAINER_CONFIGDIR with apptainer instance start and action commands that refer to instance://. * Fix the issue that apptainer would not read credentials from the Docker fallback path ~/.docker/config.json if missing in the apptainer credentials. ------------------------------------------------------------------- Tue Aug 29 15:34:36 UTC 2023 - Lubos Kocman <lubos.kocman@suse.com> - Update license for the package to cover also OpenSSL and CRYPTOGAMS part of chacha_ppc64le.s ------------------------------------------------------------------- Fri Jul 28 13:39:30 UTC 2023 - Christian Goll <cgoll@suse.com> - updated to 1.2.2 with following changes: * Fix $APPTAINER_MESSAGELEVEL to correctly set the logging level. * Fix build failures when in setuid mode and unprivileged user namespaces are unavailable and the --fakeroot option is not selected. ------------------------------------------------------------------- Wed Jul 26 07:33:42 UTC 2023 - Christian Goll <cgoll@suse.com> - updated to 1.2.1 to fix CVE-2023-38496 although not relevant as package is compiled with setuid ------------------------------------------------------------------- Wed Jun 14 08:34:27 UTC 2023 - Christian Goll <cgoll@suse.com> - update to 1.2.0 with following changes: * binary is built reproducible which disables plugins * Create the current working directory in a container when it doesn't exist. This restores behavior as it was before singularity 3.6.0. As a result, using --no-mount home won't have any effect when running apptainer from a home directory and will require --no-mount home,cwd to avoid mounting that directory. * Handle current working directory paths containing symlinks both on the host and in a container but pointing to different destinations. If detected, the current working directory is not mounted when the destination directory in the container exists. * Destination mount points are now sorted by shortest path first to ensure that a user bind doesn't override a previous bind path when set in arbitrary order on the CLI. This is also applied to image binds. * When the kernel supports unprivileged overlay mounts in a user namespace, the container will be constructed by default using an overlay instead of an underlay layout for bind mounts. A new --underlay action option can be used to prefer underlay instead of overlay. * sessiondir maxsize in apptainer.conf now defaults to 64 MiB for new installations. This is an increase from 16 MiB in prior versions. * The apptainer cache is now architecture aware, so the same home directory cache can be shared by machines with different architectures. * Overlay is blocked on the panfs filesystem, allowing sandbox directories to be run from panfs without error. * Lookup and store user/group information in stage one prior to entering any namespaces, to fix an issue with winbind not correctly looking up user/group information when using user namespaces. - New features / functionalities * Support for unprivileged encryption of SIF files using gocryptfs. This is not compatible with privileged encryption, so containers encrypted by root need to be rebuilt by an unprivileged user. * Templating support for definition files. Users can now define variables in definition files via a matching pair of double curly brackets. Variables of the form {{ variable }} will be replaced by a value defined either by a variable=value entry in the %arguments section of the definition file or through new build options --build-arg or --build-arg-file. * Add a new instance run command that will execute the runscript when an instance is initiated instead of executing the startscript. * The sign and verify commands now support signing and verification with non-PGP key material by specifying the path to a private key via the --key flag. * The verify command now supports verification with X.509 certificates by specifying the path to a certificate via the --certificate flag. By default, the system root certificate pool is used as trust anchors unless overridden via the --certificate-roots flag. A pool of intermediate certificates that are not trust anchors, but can be used to form a certificate chain, can also be specified via the --certificate-intermediates flag. * Support for online verification checks of X.509 certificates using OCSP protocol via the new verify --ocsp-verify option. * The instance stats command displays the resource usage every second. The --no-stream option disables this interactive mode and shows the point-in-time usage. * Instances are now started in a cgroup by default, when run as root or when unified cgroups v2 with systemd as manager is configured. This allows apptainer instance stats to be supported by default when possible. * The instance start command now accepts an optional --app <name> argument which invokes a start script within the %appstart <name> section in the definition file. The instance stop command still only requires the instance name. * The instance name is now available inside an instance via the new APPTAINER_INSTANCE environment variable. * The --no-mount flag now accepts the value bind-paths to disable mounting of all bind path entries in apptainer.conf. Support for DOCKER_HOST parsing when using docker-daemon:// DOCKER_USERNAME and DOCKER_PASSWORD supported without APPTAINER_ prefix. Add new Linux capabilities CAP_PERFMON, CAP_BPF, and CAP_CHECKPOINT_RESTORE. * The remote get-login-password command allows users to retrieve a remote's token. This enables piping the secret directly into docker login while preventing it from showing up in a shell's history. * Define EUID in %environment alongside UID. * In --rocm mode, the whole of /dev/dri is now bound into the container when --contain is in use. This makes /dev/dri/render devices available, required for later ROCm versions. ------------------------------------------------------------------- Tue Jun 13 14:00:33 UTC 2023 - Christian Goll <cgoll@suse.com> - update to 1.1.9 with following changes: * Remove warning about unknown xino=on option from fuse-overlayfs, introduced in 1.1.8. * Ignore extraneous warning from fuse-overlayfs about a readonly /proc. * Fix dropped "n" characters on some platforms in definition file stored as part of SIF metadata. * Remove duplicated group ids. * Fix not being able to handle multiple entries in LD_PRELOAD when binding fakeroot into container during apptainer startup for --fakeroot with fakeroot command. ------------------------------------------------------------------- Thu Apr 27 12:59:22 UTC 2023 - Christian Goll <cgoll@suse.com> - Included a fix for CVE-2023-30549 which is a vulnerability in setuid-root installations of Apptainer iwhich was not active in the recent openSUSE packages. Still this is included for completenss. The fix adds allow setuid-mount configuration options encrypted, squashfs, and extfs, and makes the default for extfs be "no". That disables the use of extfs mounts including for overlays or binds while in the setuid-root mode, while leaving it enabled for unprivileged user namespace mode. The default for encrypted and squashfs is "yes". - Other bug fixes: * Fix loop device 'no such device or address' spurious errors when using shared loop devices. * Add xino=on mount option for writable kernel overlay mount points to fix inode numbers consistency after kernel cache flush (not applicable to fuse-overlayfs). ------------------------------------------------------------------- Wed Mar 29 08:14:47 UTC 2023 - Christian Goll <cgoll@suse.com> - updated to 1.1.7 with following changes: * removed simpler-sif-building.patch as this was incoperated upstream * Allow gpu options such as --nv to be nested by always inheriting all libraries bound in to a parent container's /.singularity.d/libs. * Map the user's home directory to the root home directory by default in the non-subuid fakeroot mode like it was in the subuid fakeroot mode, for both action commands and building containers from definition files. * Make the error message more helpful in another place where a remote is found to have no library client. * Avoid incorrect error when requesting fakeroot network. * Pass computed LD_LIBRARY_PATH to wrapped unsquashfs. Fixes issues where unsquashfs on host uses libraries in non-default paths. ------------------------------------------------------------------- Fri Feb 24 13:22:57 UTC 2023 - Christian Goll <cgoll@suse.com> - added simple sif building for SLE systems via suseconnect-container - added files: * simpler-sif-building.patch * SLE-12SP5.def * leap.def ------------------------------------------------------------------- Wed Feb 15 09:01:08 UTC 2023 - Christian Goll <cgoll@suse.com> - update to 1.1.6 with following changes: * Included a fix for CVE-2022-23538 which potentially leaked user credentials to a third-party S3 storage service when using the library:// protocol. See the https://github.com/sylabs/scs-library-client/security/advisories/GHSA-7p8m-22h4-9pj7 for details. * Make PS1 environment variable changeable via %environment section on definition file that used to be only changeable via APPTAINERENV_PS1 outside of container. This makes the container's prompt customizable. * Fix the passing of nested bind mounts when there are multiple binds separated by commas and some of them have colons separating sources and destinations. * Hide messages about SINGULARITY variables if corresponding APPTAINER variables are defined. Fixes a regression introduced in 1.1.4. * Print a warning if extra arguments are given to a shell action, and show in the run action usage that arguments may be passed. * Check for the existence of the runtime executable prefix, to avoid issues when running under Slurm's srun. If it doesn't exist, fall back to the compile-time prefix. * Increase the timeout on image driver (that is, FUSE) mounts from 2 seconds to 10 seconds. Instead, print an INFO message if it takes more than 2 seconds. * If a remote is defined both globally (i.e. system-wide) and individually, change apptainer remote commands to print an info message instead of exiting with a fatal error and to give precedence to the individual configuration. ------------------------------------------------------------------- Wed Jan 11 10:25:45 UTC 2023 - Christian Goll <cgoll@suse.com> - Update to 1.1.5 with following changes: * Fix the use of fakeroot, faked, and libfakeroot.so if they are not suffixed by -sysv, as is for instance the case on Gentoo Linux. * Prevent the use of a --libexecdir or --bindir mconfig option from making apptainer think it was relocated and so preventing use of suid mode. The bug was introduced in v1.1.4. * Add helpful error message for build --remote option. * Add more helpful error message when no library endpoint found. * Avoid cleanup errors on exit when mountpoints are busy by doing a lazy unmount if a regular unmount doesn't work after 10 tries. * Make messages about using SINGULARITY variables less scary. ------------------------------------------------------------------- Wed Dec 21 13:17:54 UTC 2022 - Christian Goll <cgoll@suse.com> - moved run dir from /var/lib/apptainer to /var/apptainer to be closer to upstream ------------------------------------------------------------------- Tue Dec 20 14:14:43 UTC 2022 - Christian Goll <cgoll@suse.com> - Update to 1.1.4 with following changes: * Make the binaries built in the unprivileged apptainer package relocatable. When moving the binaries to a new location, the /usr at the top of some of the paths needs to be removed. Relocation is disallowed when the starter-suid is present, for security reasons. * Change the warning when an overlay image is not writable, introduced in v1.1.3, back into a (more informative) fatal error because it doesn't actually enter the container environment. * Set the --net flag if --network or --network-args is set rather than silently ignoring them if --net was not set. * Do not hang on pull from http(s) source that doesn't provide a content-length. * Avoid hang on fakeroot cleanup under high load seen on some distributions / kernels. * Remove obsolete pacstrap -d in Arch packer. * Adjust warning message for deprecated environment variables usage. * Enable the --security uid:N and --security gid:N options to work when run in non-suid mode. In non-suid mode they work with any user, not just root. Unlike with root and suid mode, however, only one gid may be set in non-suid mode. - Changes from 1.1.3 * Prefer the fakeroot-sysv command over the fakeroot command because the latter can be linked to either fakeroot-sysv or fakeroot-tcp, but fakeroot-sysv is much faster. * Update the included squashfuse_ll to have -o uid=N and -o gid=N options and changed the corresponding image driver to use them when available. This makes files inside sif files appear to be owned by the user instead of by the nobody id 65534 when running in non-setuid mode. * Fix the locating of shared libraries when running unsquashfs from a non-standard location. * Properly clean up temporary files if unsquashfs fails. * Fix the creation of missing bind points when using image binding with underlay. * Change the error when an overlay image is not writable into a warning that suggests adding :ro to make it read only or using --fakeroot. * Avoid permission denied errors during unprivileged builds without /etc/subuid-based fakeroot when /var/lib/containers/sigstore is readable only by root. * Avoid failures with --writable-tmpfs in non-setuid mode when using fuse-overlayfs versions 1.8 or greater by adding the fuse-overlayfs noacl mount option to disable support for POSIX Access Control Lists. * Fix the --rocm flag in combination with -c / -C by forwarding all /dri/render* devices into the container. ------------------------------------------------------------------- Fri Oct 28 08:54:51 UTC 2022 - Egbert Eich <eich@suse.com> - Add Provides: and Obsoletes: to attempt to mark this as a possible replacement for the original singularity package which has been discontinued. ------------------------------------------------------------------- Tue Oct 11 08:19:01 UTC 2022 - Christian Goll <cgoll@suse.com> - previous versions did not build squashfuse_ll, fixed this ------------------------------------------------------------------- Fri Oct 7 12:42:57 UTC 2022 - Christian Goll <cgoll@suse.com> - Udpated to 1.1.2 which fixed CVE-2022-39237 * CVE-2022-39237: The sif dependency included in Apptainer before this release does not verify that the hash algorithm(s) used are cryptographically secure when verifying digital signatures. This release updates to sif v2.8.1 which corrects this issue. See the linked advisory for references and a workaround. ------------------------------------------------------------------- Wed Sep 28 09:07:18 UTC 2022 - Christian Goll <cgoll@suse.com> - updated to version 1.1.0 without changes to rc3 ------------------------------------------------------------------- Fri Sep 9 08:50:33 UTC 2022 - Christian Goll <cgoll@suse.com> - Updated to version 1.1.0-rc3 with following changes: * added squashfuse-0.1.105.tar.gz and 70.patch for the build of squashfuse_ll which will be removed as soon as the multithread patch is incoperated * Change squash mounts to prefer to use squashfuse_ll instead of squashfuse, if available, for improved performance. squashfuse_ll is not available in factory. * Also, for even better parallel performance, include a patched multithreaded version of squashfuse_ll in * Imply adding ${prefix}/libexec/apptainer/bin to the binary path in apptainer.conf, which is used for searching for helper executables. It is implied as the first directory of $PATH if present (which is at the beginning of binary path by default) or just as the first directory if $PATH is not included in binary path. ${prefix}/libexec/apptainer/bin. * Add --unsquash action flag to temporarily convert a SIF file to a sandbox before running. In previous versions this was the default when running a SIF file without setuid or with fakeroot, but now the default is to instead mount with squashfuse. * Add --sparse flag to overlay create command to allow generation of a sparse ext3 overlay image. * Support for a custom hashbang in the %test section of an Apptainer recipe (akin to the runscript and start sections). * When using fakeroot in setuid mode, have the image drivers first enter the the container's user namespace to avoid write errors with overlays. * Skip trying to use kernel overlayfs when using writable overlay and the lower layer is FUSE, because of a kernel bug introduced in kernel 5.15. * Add additional hidden options to the action command for testing different fakeroot modes with --fakeroot: --ignore-subuid, --ignore-fakeroot-command, and --ignore-userns. ------------------------------------------------------------------- Fri Aug 19 10:07:20 UTC 2022 - Christian Goll <cgoll@suse.com> - Updated to version 1.1.0-rc2 with following changes: * Fixed longstanding bug in the underlay logic when there are nested bind points separated by more than one path level, for example /var and /var/lib/yum, and the path didn't exist in the container image. The bug only caused an error when there was a directory in the container image that didn't exist on the host. * Improved wildcard matching in the %files directive of build definition files by replacing usage of sh with the mvdan.cc library. * Replaced checks for compatible filesystem types when using fuse-overlayfs with an INFO message when an incompatible filesystem type causes it to be unwritable by a fakeroot user. * The --nvccli option now works without --fakeroot. In that case the option can be used with --writable-tmpfs instead of --writable, and --writable-tmpfs is implied if neither option is given. Note that also /usr/bin has to be writable by the user, so without --fakeroot that probably requires a sandbox image that was built with --fix-perms. * The --nvccli option implies --nv. * Configure squashfuse to always show files to be owned by the current user. That's especially important for fakeroot to prevent most of the files from looking like they are owned by user 65534. * The fakeroot command can now be used even if $PATH is empty in the environment of the apptainer command. * Allow the newuidmap command to be missing if the current user is not listed in /etc/subuid. * Require the uidmap package in Debian packaging. * Improved error handling of unsupported pass protected PEM files with encrypted containers. * Ensure bootstrap_history directory is populated with previous definition files, present in source containers used in a build. * Add additional options to the build command for testing different fakeroot modes: --userns like the action flag and hidden options --ignore-subuid, --ignore-fakeroot-command, and --ignore-userns. * Require root user early when building an encrypted container. - removed upstream incorated patch fix-32bit-compilation.patch ------------------------------------------------------------------- Thu Aug 4 12:31:33 UTC 2022 - Christian Goll <cgoll@suse.com> - Updated to version 1.1.0-rc1 which enables apptainer to run without suid and additional groups. Although this is a prerelease this is a major advantage justifying its use. * Added a squashfuse image driver that enables mounting SIF files without using setuid-root. Requires the squashfuse command and unprivileged user namespaces. * Added a fuse2fs image driver that enables mounting EXT3 files and EXT3 SIF overlay partitions without using setuid-root. Requires the fuse2fs command and unprivileged user namespaces. * Added the ability to use persistent overlay (--overlay) and --writable-tmpfs without using setuid-root. This requires unprivileged user namespaces and either a new enough kernel (>= 5.11) or the fuse-overlayfs command. Persistent overlay works when the overlay path points to a regular filesystem (known as "sandbox" mode, which is not allowed when in setuid mode), or when it points to an EXT3 image. Does not work with a SIF partition because that requires privileges to mount as an ext3 image. * Extended the --fakeroot option to be useful when /etc/subuid and /etc/subgid mappings have not been set up. If they have not been set up, a root-mapped unprivileged user namespace (the equivalent of unshare -r) and/or the fakeroot command from the host will be tried. Together they emulate the mappings pretty well but they are simpler to administer. This feature is especially useful with the --overlay and --writable-tmpfs options and for building containers unprivileged, because they allow installing packages that assume they're running as root. A limitation on using it with --overlay and --writable-tmpfs however is that when only the fakeroot command can be used (because there are no user namespaces available, in suid mode) then the base image has to be a sandbox. This feature works nested inside of an apptainer container, where another apptainer command will also be in the fakeroot environment without requesting the --fakeroot option again, or it can be used inside an apptainer container that was not started with --fakeroot. However, the fakeroot command uses LD_PRELOAD and so needs to be bound into the container which requires a compatible libc. For that reason it doesn't work when the host and container operating systems are of very different vintages. If that's a problem and you want to use only an unprivileged root-mapped namespace even when the fakeroot command is installed, just run apptainer with unshare -r. * Made the --fakeroot option be implied when an unprivileged user builds a container from a definition file. When /etc/subuid and /etc/subgid mappings are not available, all scriptlets are run in a root-mapped unprivileged namespace (when possible) and the %post scriptlet is additionally run with the fakeroot command. When unprivileged user namespaces are not available, such that only the fakeroot command can be used, the --fix-perms option is implied to allow writing into directories. * Added a --fakeroot option to the apptainer overlay create command to make an overlay EXT3 image file that works with the fakeroot that comes from unprivileged root-mapped namespaces. This is not needed with the fakeroot that comes with /etc/sub[ug]id mappings nor with the fakeroot that comes with only the fakeroot command in suid flow. * $HOME is now used to find the user's configuration and cache by default. If that is not set it will fall back to the previous behavior of looking up the home directory in the password file. The value of $HOME inside the container still defaults to the home directory in the password file and can still be overridden by the --home option. * When starting a container, if the user has specified the cwd by using the --pwd flag, if there is a problem an error is returned instead of defaulting to a different directory. * Nesting of bind mounts now works even when a --bind option specified a different source and destination with a colon between them. Now the APPTAINER_BIND environment variable makes sure the bind source is from the bind destination so it will be succesfully re-bound into a nested apptainer container. * The warning about more than 50 bind mounts required for an underlay bind has been changed to an info message. * oci mount sets Process.Terminal: true when creating an OCI config.json, so that oci run provides expected interactive behavior by default. The default hostname for oci mount containers is now apptainer instead of mrsdalloway. * systemd is now supported and used as the default cgroups manager. Set systemd cgroups = no in apptainer.conf to manage cgroups directly via the cgroupfs. * Added a new action flag --no-eval which: + Prevents shell evaluation of APPTAINERENV_ / --env / --env-file environment variables as they are injected in the container, to match OCI behavior. Applies to all containers. + Prevents shell evaluation of the values of CMD / ENTRYPOINT and command line arguments for containers run or built directly from an OCI/Docker source. Applies to newly built containers only, use apptainer inspect to check version that container was built with. * Added --no-eval to the list of flags set by the OCI/Docker --compat mode. * sinit process has been renamed to appinit. * Added --keysdir to key command to provide an alternative way of setting local keyring path. The existing reading of the keyring path from environment variable 'APPTAINER_KEYSDIR' is untouched. * apptainer key push will output the key server's response if included in order to help guide users through any identity verification the server may require. * ECL no longer requires verification for all signatures, but only when signature verification would alter the expected behavior of the list: + At least one matching signature included in a whitelist must be validated, but other unvalidated signatures do not cause ECL to fail. + All matching signatures included in a whitestrict must be validated, but unvalidated signatures not in the whitestrict do not cause ECL to fail. + Signature verification is not checked for a blacklist; unvalidated signatures can still block execution via ECL, and unvalidated signatures not in the blacklist do not cause ECL to fail. - New features / functionalities * Non-root users can now use --apply-cgroups with run/shell/exec to limit container resource usage on a system using cgroups v2 and the systemd cgroups manager. * Native cgroups v2 resource limits can be specified using the [unified] key in a cgroups toml file applied via --apply-cgroups. * Added --cpu*, --blkio*, --memory*, --pids-limit flags to apply cgroups resource limits to a container directly. Added instance stats command. * The --no-mount flag & APPTAINER_NO_MOUNT env var can now be used to disable a bind path entry from apptainer.conf by specifying the absolute path to the destination of the bind. * Apptainer now supports the riscv64 architecture. * remote add --insecure may now be used to configure endpoints that are only accessible via http. Alternatively the environment variable APPTAINER_ADD_INSECURE can be set to true to allow http remotes to be added wihtout the --insecure flag. Specifying https in the remote URI overrules both --insecure and APPTAINER_ADD_INSECURE. * Gpu flags --nv and --rocm can now be used from an apptainer nested inside another apptainer container. * Added --public, --secret, and --both flags to the key remove command to support removing secret keys from the apptainer keyring. * Debug output can now be enabled by setting the APPTAINER_DEBUG env var. * Debug output is now shown for nested apptainer calls, in wrapped unsquashfs image extraction, and build stages. - Bug fixes * Remove warning message about SINGULARITY and APPTAINER variables having different values when the SINGULARITY variable is not set. * Add specific error for unreadable image / overlay file. * Pass through a literal \n in host environment variables to the container. * Fix loop device creation with loop-control when running inside docker containers. * Fix the issue that the oras protocol would ignore the --no-https/--nohttps flag. - File changes * Removed useful_error_message.patch as not needed any more * Added fix-32bit-compilation.patch from upstream ------------------------------------------------------------------- Mon Jul 11 09:38:45 UTC 2022 - Christian Goll <cgoll@suse.com> - Update to version 1.0.3: * Process redirects that can come from sregistry with a library:// URL. * Fix inspect --deffile and inspect --all to correctly show definition files in sandbox container images instead of empty output. This has a side effect of also fixing the storing of definition files in the metadata of sif files built by Apptainer, because that metadata is constructed by doing inspect --all. ------------------------------------------------------------------- Wed May 18 12:07:59 UTC 2022 - Dominique Leuenberger <dimstar@opensuse.org> - Update to version 1.0.2: + Fixed `FATAL` error thrown by user configuration migration code that caused users with inaccessible home directories to be unable to use `apptainer` commands. + Do not truncate environment variables with commas. + Use HEAD request when checking digest of remote OCI image sources, with GET as a fall-back. Greatly reduces Apptainer's impact on Docker Hub API limits. ------------------------------------------------------------------- Fri Mar 18 16:02:59 UTC 2022 - Christian Goll <cgoll@suse.com> - Updated to v1.0.1 with following bug fixes * Don't prompt for y/n to overwrite an existing file when build is called from a non-interactive environment. Fail with an error. * Preload NSS libraries prior to mountspace name creation to avoid circumstances that can cause loading those libraries from the container image instead of the host, for example in the startup environment. * Fix race condition where newly created loop devices can sometimes not be opened. * Support nvidia-container-cli v1.8.0 and above, via fix to capability set. ------------------------------------------------------------------- Thu Feb 17 15:29:45 UTC 2022 - Christian Goll <cgoll@suse.com> - Updated to v1.0.0-rc1 changes to singularity 3.9.5 are * The primary executable has been changed from singularity to apptainer. However, a singularity command symlink alias has been created pointing to the apptainer command. The contents of containers are unchanged and continue to use the singularity name for startup scripts, etc. * The per-user configuration directory has changed from ~/.singularity to ~/.apptainer. The first time the apptainer command accesses the user configuration directory, relevant configuration is automatically imported from the old directory to the new one. * Environment variables have all been changed to have an APPTAINER prefix instead of a SINGULARITY prefix. However, SINGULARITY prefix variables are still recognized. If only a SINGULARITY prefix variable exists, a warning will be printed about deprecated usage and then the value will be used. If both prefixes exist and the value is the same, no warning is printed; this is the recommended method to set environment variables for those who need to support both apptainer and singularity. If both prefixes exist for the same variable and the value is different then a warning is also printed. * The default SylabsCloud remote endpoint has been removed and replaced by one called DefaultRemote which has no defined server for the library:// URI. System administrators may restore the old default if they wish by adding it to /etc/apptainer/remote.yaml with a URI of cloud.sylabs.io and setting it there as the Active remote, or users can add it to their own configuration with the commands apptainer remote add SylabsCloud cloud.sylabs.io and apptainer remote use SylabsCloud. * The DefaultRemote's key server is https://keys.openpgp.org instead of the Sylabs key server * The apptainer build --remote option has been removed because there is no standard protocol or non-commercial service that supports it. - New Features: * Honor image binds and user binds in the order they're given instead of always doing image binds first. * Experimental support for checkpointing of instances using DMTCP has been added. Additional flags --dmtcp-launch and --dmtcp-restart has been added to the apptainer instance start command, and a checkpoint command group has been added to manage the checkpoint state. A new /etc/apptainer/dmtcp-conf.yaml configuration file is also added. Limitations are that it can only work with dynamically linked applications and the container has to be based on glibc. * --writable-tmpfs can be used with apptainer build to run the %test section of the build with a ephemeral tmpfs overlay, permitting tests that write to the container filesystem. * The --compat flag for actions is a new short-hand to enable a number of options that increase OCI/Docker compatibility. Infers --containall, --no-init, --no-umask, --writable-tmpfs. Does not use user, uts, or network namespaces as these may not be supported on many installations. * The experimental --nvccli flag will use nvidia-container-cli to setup the container for Nvidia GPU operation. Apptainer will not bind GPU libraries itself. Environment variables that are used with Nvidia's docker-nvidia runtime to configure GPU visibility / driver capabilities & requirements are parsed by the --nvccli flag from the environment of the calling user. By default, the compute and utility GPU capabilities are configured. The use nvidia-container-cli option in apptainer.conf can be set to yes to always use nvidia-container-cli when supported. --nvccli is not supported in the setuid workflow, and it requires being used in combination with --writable in user namespace mode. Please see documentation for more details. * The --apply-cgroups flag can be used to apply cgroups resource and device restrictions on a system using the v2 unified cgroups hierarchy. The resource restrictions must still be specified in the v1 / OCI format, which will be translated into v2 cgroups resource restrictions, and eBPF device restrictions. * A new --mount flag and APPTAINER_MOUNT environment variable can be used to specify bind mounts in type=bind,source=<src>,destination=<dst>[,options...] format. This improves CLI compatibility with other runtimes, and allows binding paths containing : and , characters (using CSV style escaping). * Perform concurrent multi-part downloads for library:// URIs. Uses 3 concurrent downloads by default, and is configurable in apptainer.conf or via environment variables. ------------------------------------------------------------------- Wed Dec 15 08:38:57 UTC 2021 - Christian Goll <cgoll@suse.com> - Explicit dependcy on go1.16.12 or go1.17.5 which fix (CVE-2021-44717) and (CVE-2021-44716) that may affect singualrity ------------------------------------------------------------------- Mon Dec 13 12:55:47 UTC 2021 - Christian Goll <cgoll@suse.com> - inital commit of apptainer which is a singularity fork
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
