File flashrom.changes of Package flashrom
-------------------------------------------------------------------
Wed Jun 4 13:59:53 UTC 2025 - ecsos <ecsos@opensuse.org>
- Fix build error for Leap 16.0
-------------------------------------------------------------------
Sun Dec 22 10:48:46 UTC 2024 - Martin Hauke <mardnh@gmx.de>
- Update to version 1.5.1
* fixed an issue flashing some Intel-based platforms with the
internal programmer that was introduced in 1.5.0.
-------------------------------------------------------------------
Sun Dec 8 12:58:45 UTC 2024 - Martin Hauke <mardnh@gmx.de>
- Update to version 1.5.0
* https://www.flashrom.org/release_notes/v_1_5.html
* Update flashrom.keyring
-------------------------------------------------------------------
Sun Oct 13 10:16:37 UTC 2024 - ecsos <ecsos@opensuse.org>
- Fix build error under Leap.
-------------------------------------------------------------------
Sat Jul 27 23:57:36 UTC 2024 - Joshua Smith <smolsheep@opensuse.org>
- Add doc and bash-completion subpackages
- Update to 1.4.0:
- Full changelog: https://www.flashrom.org/release_notes/v_1_4.html
-------------------------------------------------------------------
Fri Sep 22 19:54:18 UTC 2023 - Adam Mizerski <adam@mizerski.pl>
- Update to 1.3.0
- See changelog at https://www.flashrom.org/Flashrom/1.3
- Removed patches (merged upstream):
- flashrom-install-man-file.patch
- flashrom-j-link-spi.patch
-------------------------------------------------------------------
Sun Jul 24 14:57:24 UTC 2022 - Michael Gorse <mgorse@suse.com>
- Switch to meson
- Add flashrom-install-man-file.patch: install the man file when
using meson.
- Add flashrom-j-link-spi.patch: Add missing meson option for
J-Link SPI.
- Drop fix_aarch64.patch: no longer relevant.
- Package the library and headers.
-------------------------------------------------------------------
Thu Sep 9 15:02:36 UTC 2021 - Andreas Schwab <schwab@suse.de>
- Enable build on riscv64
- Drop requires on dmidecode, no longer needed
-------------------------------------------------------------------
Fri Nov 27 08:18:53 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Fix build on aarch64 with upstream patch:
* fix_aarch64.patch
-------------------------------------------------------------------
Thu Feb 20 21:18:38 UTC 2020 - Martin Hauke <mardnh@gmx.de>
- Update to version 1.2
- Meson support
- Layout improvements/fixes and many, many code cleanups.
- New chips: MX25U25635F, MX25L51245G, GD25Q256D, M95M02-A125,
N25Q/MT25Q variants, W25Q128JW_DTR, AT25SF321, S25FL512S
- New programmers: National Instruments USB-845x, Tin Can Tools
Flyswatter/Flyswatter 2, STLINK V3, more Intel PCHs (Apollo
Lake, Cannon Lake variants, Ice Lake U)
- Reduced dependency on libusb0
- Syntax: Added --flash-name and --flash-size arguments to print
information about the flash chip
-------------------------------------------------------------------
Sun Jun 23 17:43:36 UTC 2019 - Martin Hauke <mardnh@gmx.de>
- Update to version 1.1
New major user-visible features
* 4-byte address support for many SPI programmers
* New option to use a reference file for flash contents
(--flash-contents)
* Layout support for coreboot's FMAP format (--fmap, --fmap-file)
* BAUD rate selection for Buspirate SPI
* Support for the ENE Embedded Debug Interface (EDI), probably
our first non-jedec SPI target
* On Intel ME enabled systems, internal flashing is allowed by
default
New programmers
* ENE Embedded Debug Interface EDI
* Linux' MTD interface
* Digilent SPI for the iCEblink40 development board
* Developerbox/CP2104 bit banging
* J-Link SPI
* Dediprog firmwares >= 7.2.30
* Dediprog SF200
* Intel Kabylake PCHs
Support for lots of new chips
-------------------------------------------------------------------
Sun Mar 31 20:18:21 UTC 2019 - Martin Hauke <mardnh@gmx.de>
- Update to version 1.0.1
* linux_spi: Reduce maximum read chunksize
* Hardcode default spispeed of 2MHz
Default speed of kernel drivers isn't always sane (any more).
* Fix dmi_match string for ThinkPad X201
* verification with sparse layouts
* Fix erasing of unaligned regions
-------------------------------------------------------------------
Wed Jan 3 14:52:38 UTC 2018 - mardnh@gmx.de
- Update to version 1.0
* Support layouts for read and erase commands
* New command line switch --noverify-all (-N) allows flashing of
individual regions without reading the whole flash chip
(particular useful with locked down Intel ME firmware)
* New command line switch --ifd to read the layout from an
Intel Firmware Descriptor on flash
* We got rid of the delay-loop calibration (if the OS provides an
accurate timer through clock_gettime())
* Reading speed of USB programmers should have increased (reading
bigger chunks at once, we reduce the overhead)
* Support Intel 100 series PCHs (Sunrise Point, coupled with
Skylake and Kaby Lake) and C620 series PCHs (Lewisburg paired
with Workstation/Server versions of the former)
* New programmers
+ Intel 100 series / C620 series PCHs
+ Intel I210 NICs (EEPROM and SPI)
+ AMD Merlin Falcon (FP4)
* New chips
+ W25Q128.W
- Specfile cleanup
- Verify source signature
-------------------------------------------------------------------
Wed Apr 26 12:54:46 UTC 2017 - agraf@suse.com
- Enable build for ARM
-------------------------------------------------------------------
Tue Jul 26 07:50:06 UTC 2016 - glin@suse.com
- Update to 0.9.9
* Enable the dediprog module by default, add support for Dediprog
SF600 and the new communication protocol of the SF100 with
newer firmware
* Add support to update the firmware of Promise UltraATA
controllers
* Support new programers: WCH CH341A, VIA VT8251
* Support new chips:
+ ESI ES25P40, ES25P80, ES25P16
+ GigaDevice GD25VQ41B, GD25Q128C, GD25VQ21B, GD25VQ40C,
GD25VQ80C and GD25VQ16C, GD25LQ40, GD25LQ80, GD25LQ16,
GD25LQ64(B), GD25LQ128
+ PMC Pm25LQ020, Pm25LQ040, Pm25LQ080, Pm25LQ016, Pm25LQ032C
+ Sanyo LE25FU406C/LE25U40CMC
+ SST SST25WF020A, SST25WF040B, SST25WF080B
+ Winbond W29C512A/W29EE512
* Allow to link flashrom statically (with make CONFIG_STATIC=yes)
* Ease debugging of build problems with libraries
* Ignore 0x00 as a flash chip manufacturer ID in the generic
match to avoid ambiguous messages
* Various improvements for serprog-based programmers
* Add support for libftdi1
* Add infrastructure for libusb1 and use it for new programmers
* Rigorously check integrity of I/O stream data
* Add make parameters for easier disabling/enabling of various
classes of programmers
-------------------------------------------------------------------
Fri Apr 3 07:22:52 UTC 2015 - mpluskal@suse.com
- Update to 0.9.8
* A bunch of newly supported architectures: ARM 64bit,
big-endian ARM, PowerPC 64bit, SPARC.
* Better support for AMD chipsets in general (speed selection,
more conservative defaults etc.).
* Add new programmer support:
* AMD Yangtze's SPI controller (found in Kabini and Tamesh) as
well as the one in Bolton FCHs (A78, A88X, A77E).
* Intel Silvermont chipsets (Bay Trail, Rangeley and Avoton) and
Wildcat Point (for Broadwell).
* ITE IT8212F parallel programmer as it8212 (found on PCI SATA
RAID controllers).
* VIA VT6421A LPC programmer as atavia (found on PCI SATA
controllers).
* EEPROMs on Intel network cards based on the 82580 NIC
(nicintel_eeprom).
* Intel 82599 10 GbE NICs boot PROMs (part of nicintel_spi).
* Microchip PICkit 2
* MSTAR I²C ISP protocol (not compiled in by default). Rewrites the
firmware of your screen over VGA/DVI(!).
* Extension of the rayer_spi module to supported various similar
devices (Altera ByteBlasterMV, Atmel STK200/300, Wiggler LPT).
* Switching betweens chips on boards with GIGABYTE's DualBIOS
(using the dualbiosindex programmer parameter).
* Enable fwh_idsel parameter for C-ICH and ICH2/3/4/5 chipsets.
* Finer-grained display of support status used for flash chip
operations, chipsets, mainboards and programmers (new states:
configuration-dependent, not applicable).
-------------------------------------------------------------------
Thu Oct 30 17:14:59 UTC 2014 - crrodriguez@opensuse.org
- Build Require libusb-devel, fix build in factory
-------------------------------------------------------------------
Thu Oct 30 17:11:32 UTC 2014 - stepan@coresystems.de
- update to 0.9.7 r1852.
-------------------------------------------------------------------
Thu Aug 15 11:35:37 UTC 2013 - p.drouand@gmail.com
- Update to version 0.9.7
+ see http://flashrom.org/Flashrom/0.9.7 for changes
- Use official tarball instead of generated one from svn
- Let RPM strips manpage himself;
- Change Url to real one
-------------------------------------------------------------------
Wed Mar 13 13:39:07 UTC 2013 - cfarrell@suse.com
- license update: GPL-2.0
No indication of aggregation
-------------------------------------------------------------------
Tue Mar 5 13:17:17 UTC 2013 - coolo@suse.com
- update license to new format
-------------------------------------------------------------------
Sun Sep 23 22:00:26 UTC 2012 - kernel01@hailfinger.org
- Update to 0.9.6.1
-------------------------------------------------------------------
Fri Oct 28 21:59:50 CLST 2011 - crrodriguez@opensuse.org
- update to 0.9.4 r1457.
* Mark several new boards as supported/unsupported
-------------------------------------------------------------------
Fri Oct 14 00:02:55 CLST 2011 - stepan@coresystems.de
- update to 0.9.4 r1450.
* support more devices
- Fix update-snapshots script when running svn with locales other
than english.
-------------------------------------------------------------------
Tue Oct 4 22:34:26 UTC 2011 - kernel01@hailfinger.org
- Update flashrom from 0.9.4-beta to 0.9.4
* Fixes for crashes and corruption in corner cases
-------------------------------------------------------------------
Sun Sep 18 17:17:12 UTC 2011 - jengelh@medozas.de
- Apply packaging guidelines (remove redundant/obsolete
tags/sections from specfile, etc.)
-------------------------------------------------------------------
Fri Jun 3 01:08:18 SAST 2011 - stepan@coresystems.de
- update to 0.9.3 r1322.
-------------------------------------------------------------------
Thu Mar 31 22:09:10 CEST 2011 - stepan@coresystems.de
- update to 0.9.3 r1283.
-------------------------------------------------------------------
Thu Dec 9 22:11:02 CET 2010 - stepan@coresystems.de
- update to 0.9.3 r1246.
- split package into coreboot-utils and flashrom
- add update-snapshots script
-------------------------------------------------------------------
Wed Sep 2 20:04:06 CEST 2009 - kernel01@hailfinger.org
- Update flashrom to from 0.9.1-rc1 to 0.9.1
* Bug fixes and documentation fixes only
- Update nvramtool to r4625
* Fix HIGH_TABLES
* Install manpage in section 8 instead of section 1
-------------------------------------------------------------------
Mon Aug 24 13:26:37 CEST 2009 - kernel01@hailfinger.org
- Update flashrom description
- Add nvramtool description
- Use RPM_OPT_FLAGS, drop custom CFLAGS/LDFLAGS
- Install nvramtool in sbin because it's only usable as root
-------------------------------------------------------------------
Tue Aug 18 20:32:39 CEST 2009 - kernel01@hailfinger.org
- Update flashrom to version 0.9.1-rc1
* Support for more external flashers
* Universal external flasher protocol
* Automatic write/erase verification
* Dozens of added flash chips, chipsets, mainboards
* No root privileges needed for most external flashers
* Improved more verbose user interface
* Speedups: Fast bus type dependent probing, 100x faster write for
some chips
* Reliability fixes for buggy hardware, corner case spec
conformance
-------------------------------------------------------------------
Mon Jun 22 21:48:15 CEST 2009 - trenn@suse.de
- Update coreboot-utils to version 0.9.0
-------------------------------------------------------------------
Thu Jan 8 17:37:43 CET 2009 - bbrunner@suse.de
- update nvramtool to svn release r3852
- update flashrom to svn release r3852
-------------------------------------------------------------------
Wed Oct 15 20:58:16 CEST 2008 - bwalle@suse.de
- update nvramtool to svn release r3613
- update flashrom to svn release r3659
-------------------------------------------------------------------
Wed Aug 13 18:11:40 CEST 2008 - ro@suse.de
- add ExclusiveArch
-------------------------------------------------------------------
Mon Mar 17 17:14:59 CET 2008 - bwalle@suse.de
- rename lxbios to nvramtool
- update nvramtool to svn release r3124
- update flashrom to svn release r3153
-------------------------------------------------------------------
Sun Jan 20 00:02:19 CET 2008 - bwalle@suse.de
- update to svn release r3061
o Support SPI flash chips bigger than 512 kByte sitting behind
IT8716F Super I/O performing LPC-to-SPI flash translation.
o Enable MX25L8005 support in flashrom.
o Minor changes.
- add lxbios utility
-------------------------------------------------------------------
Thu Jan 10 11:41:16 CET 2008 - bwalle@suse.de
- initial package
