File i3status.changes of Package i3status
-------------------------------------------------------------------
Mon Sep 9 08:50:37 UTC 2019 - Dan Čermák <dcermak@suse.com>
- update to version 2.13:
* add memory module
* add read_file module
* drop CAP_NET_ADMIN (not needed on Linux ≥ 2.6.37)
* switch to autotools
* battery: hide seconds by default
* wireless: add format_quality
* doc: clarify min_width not being supported with dzen2/xmobar
* battery: read multiple batteries on DragonFlyBSD
* make: don’t use pulseaudio on DragonFlyBSD
* wireless: detect interface type on DragonFlyBSD
* cpu usage: fix: correctly print usage for cpu 10
* cpu usage: fix: correctly print for invalid %cpu placeholder
* cpu usage: support non-consecutive CPUs
* time: add only_when_tz_different option
* ethernet: add %interface
* ethernet: fix speed display for 100 Gbit/s cards
* battery: handle POWER_SUPPLY_STATUS=Not charging
* volume: provide more natural volume percentage with ALSA
* volume: fix ALSA capture device monitoring
* volume: implement %devicename for PulseAudio and ALSA
* config: re-arrange disk after network interfaces
* fix: include sys/socket.h on macOS
* fix: strip network interface labels
* fix glob(3) error handling
* various testsuite improvements
* switch to clang-format-3.8
-------------------------------------------------------------------
Fri May 18 15:47:31 UTC 2018 - jengelh@inai.de
- Ensure neutrality of description.
-------------------------------------------------------------------
Sat May 12 03:32:58 UTC 2018 - avindra@opensuse.org
- update to version 2.12:
* show IP address when address has a label
* treat zero battery capacity as "not available"
* add IPv6 address when IPv4 isn't available
* call tzset at each time print to pick up time zone changes
* doc: fixed minor typos
* be more cautious about handling invalid battery measurements.
* fix CPU unit tests
* use local timezone for battery %emptytime
* fix memory leak/use BEGINS_WITH macro
* _first_: add check for virtual ethernet devices
* add battery capacity parsing
* multiple CPU support for cpu_usage
* remove useless checks (we use char, not unsigned char) to fix
compilation warnings
* disk: sanitize trailing slashes
* suppress printing :00 seconds of remaining battery lifetime, as
apm(4)'s estimate only has a granularity of minutes.
* Makefile: make PKG_CONFIG overridable
* man page updates
- cleanup with spec-cleaner
- use https urls
- remove yajl fallback from source to ensure ours is used
- remove SLOC comment from description (no longer valid)
-------------------------------------------------------------------
Wed Apr 12 20:47:43 UTC 2017 - arun@gmx.de
- update to version 2.11:
* re-add forgotten wakeup call from SIGUSR1 handler
* disk_info: bugfix: check format_not_mounted is not NULL before
using it
* revert back to using nanosleep
* man: give more descriptive symbols to battery format
* battery: removes the 'remaining' time when the battery is full
* add separator and separator_block_width as universal module
options
* man: fix link to contrib
* cpu_temperature: add glob check
* battery: add status_unk
* reconnect to PluseAudio when connection is lost
* wireless: add ifdef to compile on macOS
* order default configuration paths the same as in i3
* add version files for release tarball
* man: make tztime example config match the context
* cpu_usage: add color thresholds
* battery: support multiple batteries
* disk: use empty string for not mounted disks
* default config: remove DHCP, VPN
* wireless: fix FTBFS on hurd and kFreeBSD
* parse uevent file to detect network device type
* allow pulse device to be specified by name
* battery: find batteries using glob
* tztime: support locales
* wireless: use blank padding for quality
* add unit tests
* fix compilation with -fno-common
-------------------------------------------------------------------
Tue Mar 8 08:03:19 UTC 2016 - arun@gmx.de
- specfile:
* add libnl3-devel, libpulse-devel
- update to version 2.10:
* man: fix typo in battery example
* Pass the "instance" JSON property key for tztime blocks
* Fix build (and build warnings) on FreeBSD
* Fix build on OpenBSD
* path_exists, run_watch: add format_down
* volume: add PulseAudio support. This significantly reduces battery
consumption on systems that use PulseAudio, which is the default
on any modern Linux desktop.
* wireless/OpenBSD: use the maximum rssi, not the scaled percentage
for the signal level.
* make: Add support for differing PREFIX and MANPREFIX.
* battery: make output HH:MM across all platforms.
* battery: clamp the percentage at 100% when last_full_capacity is
enabled.
* Use format_not_mounted if the directory for a disk_info block does
not exist.
* disk_info/OS X: Fix build.
* volume/OpenBSD: use SndIO.
* eth, wireless: Use "color_degraded" when interface has no IP.
* eth, wireless/FreeBSD: Fix for recent FreeBSD versions.
* wireless/Linux: switch from libiw to libnl. This allows you to run
i3status on kernels which don’t have the wext compatibility module
enabled.
* battery/FreeBSD: properly detect charging status
* eth: first_eth_interface: ignore MAC addresses, look for IPv4/IPv6
addresses
* Implement support for Pango markup.
* format detection: recognise swaybar
-------------------------------------------------------------------
Mon Jun 8 04:52:20 UTC 2015 - arun@gmx.de
- update to version 2.9:
* meta: i3status is now on GitHub and uses clang-format
* allow customization of the module separator
* add “align” and “min_width” options for each module
* fix CFLAGS and LDFLAGS for DragonFly and FreeBSD
* add contrib/net-speed, a more light-weight reimplementation of
* contrib/measure-net-speed.bash
* battery: add hide_seconds option
* battery: fix for systems without POWER_SUPPLY_VOLTAGE_NOW
* battery: for %percentage, drop leading 0 for values < 10
* battery: add NetBSD support
* battery: use absolute values for (dis)charging rates
* battery: introduce status_{chr,bat,full}
* cpu_temperature: fix displaying multiple sensors
* cpu_temperature: fix NetBSD support
* cpu_temperature: fix DragonFly support
* disk: introduce threshold_type and low_threshold
* disk: add format_not_mounted for unmounted paths
* ethernet, wireless: support special interface name _first_
* run_watch: check all matching pid files until first valid one
* volume: fix wrong color tags with xmobar
* wireless: support %frequency (2.4 vs. 5 GHz)
-------------------------------------------------------------------
Sun Feb 1 00:41:34 UTC 2015 - arun@gmx.de
- replaced tar-ball with tar-ball from Source location
(they were different for some location, which was the
reason the package didn't get updated in Factory)
- Removed i3status-2.7-makefile.patch
-------------------------------------------------------------------
Sa Jul 26 22:2:11 UTC 2014 - email@pfeiffer.pw
Fix build on GNU/Hurd
Add format_down for battery if no battery is available
Use degraded color in case volume is muted with OSS
Support mixer_idx with OSS
Enable colored output for battery on FreeBSD
print_volume: don’t return, complete the buffer first
Support colored output for CPU temperature on FreeBSD
manpage: mention i3bar in the description
manpage: be more explicit about the path option
battery: use path as i3bar JSON “instance”
print_volume(linux): Open a new mixer every time
Implement term output format
signal handler: set flag because directly calling fprintf() is unsafe
Makefile: use .SILENT and support V=1 for verbose builds
load: allow max_threshold to be a float
manpage: Add example path for CPU temperature
Fix build on NetBSD
Implement cpu usage, ethernet status, cpu temperature on NetBSD
fix slurp(), it needs to read size-1 for the trailing NUL
format detection: simplify code, handle "sh" processes in the hierarchy
default config: show %avail disk space instead of %free
Added different format string for volume in case it is muted
manpage: document format_muted
add support for path_exists directive
disk: Distinguish between IEC, SI and custom prefixes
-------------------------------------------------------------------
Thu Mar 14 08:52:47 UTC 2013 - toganm@opensuse.org
- Update to 2.7 version
* Skip a day in the Discordian calendar when St. Tib's Day has
passed
* colors: Handle down wireless interfaces just like ethernet
interfaces
* temperature: introduce max_threshold
* battery: colorize output even without discharge rate
* ddate: Reduce the season day to 0-9 to properly print ordinal
suffixes
* add good, degraded and bad colors per module
* config: introduce an utf-8 character so that editors are forced
to use utf-8
* ddate: Teen ordinal numbers always use a 'th' suffix.
* make SIGUSR1 do nothing, so that killall -USR1 i3status will
force an update
* changing volume color from bad to degraded if muted
* make refreshs align with minutes
* wifi: properly display ad-hoc networks
* Bugfix: output auto detect: properly detect ambiguous situations
* Add tztime module to support multiple different timezones
* battery: add option to show capacity without decimals
* Add colorized output for load avg
* ipv6: properly handle colors for output_format == xmobar
* contrib: fix premature insetion of status message into JSON
- Spec file cleanup
* rebased i3status-makefile.patch and renamed as
i3status-2.7-makefile.patch
-------------------------------------------------------------------
Sat Nov 24 18:39:30 CET 2012 - pascal.bleser@opensuse.org
- initial version (2.6)
