File mkvtoolnix.changes of Package mkvtoolnix

Overview Repositories Revisions Requests Users Attributes Meta

File mkvtoolnix.changes of Package mkvtoolnix (Revision d9ff42003c8cc42a72e524ba198bc1da)

Currently displaying revision d9ff42003c8cc42a72e524ba198bc1da , Show latest

-------------------------------------------------------------------
Sun Jun 13 17:21:56 UTC 2021 - Luigi Baldoni <aloisio@gmx.com>

- Update to version 58.0.0
  New features and enhancements:
  * mkvmerge, MKVToolNix GUI's multiplexer: the handling of the
    "default track" flag has been changed to match the recent
    changes to the Matroska specifications. The new semantics
    are that if it is set, it is supposed to signal to the
    player that this track is eligible for being played by
    default, potentially taking other factors such as user
    preferences regarding languages into account.
    This implies that more than one track of each type can have
    this flag set. For example, a Blu-ray disc with three audio
    tracks might have the main audio in both English and
    Japanese, whereas the third audio track contains the
    director's comments. In such a case the first two tracks
    should have the "default track" flag set, the third one
    shouldn't.
    Earlier `mkvmerge` was enforcing that only one track of each
    type could have the flag set. This restriction has been
    removed, both in `mkvmerge` and in the GUI's multiplexer.
    `mkvpropedit` and the GUI's header editor are unaffected as
    they've always allowed to set the flag on as many tracks as
    the user wanted.
  * mkvmerge: AVC/H.264 & HEVC/H.265 identification: added the
    stream's pixel dimensions (AVC only; were present for HEVC
    already) & default duration.
  * mkvmerge, mkvextract: HEVC/H.265: added support for reading
    single-layer Dolby Vision from Annex B type bitstreams
    (elementary streams, MPEG transport streams).
  * mkvinfo: the option `-X`/`--full-hexdump` now affects all
    binary elements, not just the frame data in `SimpleBlock`
    and `BlockGroup` elements.
  * MKVToolNix GUI: multiplexer: the "delay" and "sync" options
    can now be used for chapters in source files, too.
  * MKVToolNix GUI: when moving list entries up & down with the
    optional buttons or the keyboard shortcuts (instead of using
    drag & drop), the GUI ensures that the top-most selected
    entry remains visible after the move.
  * MKVToolNix GUI: added an option in the preference to use
    legacy MIME types for font attachments instead of the current
    standard ones (e.g. 'application/x-truetype-font' instead of
    'font/sfnt' and 'font/ttf').
  Bug fixes:
  * build system: fixed filtering out optimization options when
    compiling the file `iso639_language_list.cpp` (before only
    numeric optimization levels were filtered out and only if it
    wasn't the last option in the list of flags).
  * build system: when libmagic was detected via `pkg-config`,
    MKVToolNix was actually compiled without support for
    libmagic due to a preprocessor symbol not being defined.
  * mkvmerge: MP4 reader: fixed an issue with timestamps
    overflowing when the file's or the track's time scale is
    large.
  * mkvmerge, mkvextract: fixed key frame handling for
    `BlockGroup` elements with a forward reference but no
    backward references.
  * mkvmerge, mkvpropedit, MKVToolNix GUI's chapter editor: the
    programs will no longer omit writing mandatory elements set
    to their default value if other elements of the same type
    are present in the same master. This affects mostly the
    "chapter language" element which may occur multiple times
    within the same "chapter display" master. If it does occur
    multiple times and one of them is set to "English" (which is
    that element's default value), that element will now be
    written, too.
  * mkvmerge, mkvpropedit, MKVToolNix GUI's chapter editor: when
    parsing chapter files IETF & legacy language elements as
    well as legacy country elements will now be properly
    generated depending on which exist already, especially when
    there's more than one language and/or country element
    in a "chapter display" element.
  * mkvmerge, mkvpropedit, MKVToolNix GUI's chapter editor:
    fixed reading OGM-style chapter files with timestamps that
    don't have exactly three decimal places. Any number of
    decimal places between one and nine is now supported for
    nanosecond precision.
  * MKVToolNix GUI: chapter editor: added/fixed support for
    "chapter display" elements with multiple languages or
    countries.
  Build system changes:
  * Qt 6: added support for building with Qt 6. `configure` will
    look for Qt 6 first and only continue looking for Qt 5 if Qt
    6 isn't found or disabled via `--disable-qt6`.
    Qt 6 detection works by first looking for the `qmake6`
    binary. Its location can be specified with the
    `--with-qmake6=…` option.
    All other Qt 6 related facts (such as compiler & linker
    flags or the position of the other required tools such as
    `lconvert`, `moc`, `rcc` and `uic`) will be derived from
    the output generated by `qmake6`.
    Note that at this point Qt 6 is not yet supported for the
    cross-compilation  build to Windows, nor is a static Qt 6
    build supported yet. Note that the command line options
    `--enable-static-qt`, `--with-qt-pkg-config-modules` and
    `--without-qt-pkg-config` only apply to the Qt 5 and have
    no effect on Qt 6.
  * Qt 5: the options for specifying the position of the tools
    (`--with-moc=…`,`--with-rcc=…` and `--with-uic=…`) have been
    removed. Their position will now be derived from the output
    generated by `qmake`.
  * `configure`: completely disabling the GUI now requires
    passing both `--disable-qt6` and `--disable-qt` options.
  * Boost's multi-precision library is now required.
  * Boost v1.66 or newer is now required.

-------------------------------------------------------------------
Sat May 22 13:28:48 UTC 2021 - Luigi Baldoni <aloisio@gmx.com>

- Up date to version 57.0.0
  New features and enhancements:
  * mkvmerge: MP4 reader: added support for reading Dolby Vision
    from MP4 files (FourCCs `dvh1` and `dvhe`; configuration
    records `dvcC`, `dvvC` and `hvcE` will be converted into
    block addition mappings).
  * mkvmerge: SRT subtitles: mkvmerge now accepts empty text
    files with the extension `.srt` as SRT subtitle files,
    enabling the creation of empty SRT tracks.
  * mkvmerge, mkvextract: HEVC/H.265: access unit delimiter
    NALUs will no longer be discarded, neither during muxing nor
    during extraction.
  * MKVToolNix GUI: preferences: switched the order & wording of
    controls in the "enabling items" panel to make it clearer
    that certain controls define exceptions.
  Bug fixes:
  * mkvmerge: HEVC/H.265 parser: several NALU types, notably the
    Dolby Vision-specific NALUs ("unspecified 62" and
    "unspecified 63") and suffix SEI NALUs, are now stored with
    the frame they belong to instead of with the next frame.
  * mkvmerge: HEVC/H.265 packetizer: fixed setting the track's
    default duration when reading HEVC/H.265 from Matroska files
    that don't have a default duration set.
  * mkvmerge: HEVC/H.265 packetizer: fixed the calculation of
    the duration of frames so that `SimpleBlock` elements can be
    used again instead of `BlockGroups` with `BlockDuration`
    elements.
  * mkvmerge, mkvextract: HEVC/H.265 parser: fixed issues with
    ordering & duplication of certain NALUs (parameter set &
    prefix SEI NALUs).
  * MKVToolNix GUI: multiplexer: when dragging & dropping files
    to the multiplexer, the source directory will be remembered
    as the "last open directory" again, causing subsequent uses
    of the "open file" dialog to start in the same directory.
  * mkvinfo: fixed the position of frames in block groups
    containing "block duration" elements in summary mode (e.g.
    for subtitle tracks).
  Build system changes:
  * `configure` will now try to detect `libmagic` via
    `pkg-config` and fall back to including & linking directly if
    it cannot be found via `pkg-config`.

-------------------------------------------------------------------
Fri Apr  9 17:29:25 UTC 2021 - aloisio@gmx.com

- Update to version version 56.1.0
  New features and enhancements:
  * mkvmerge: AAC: added support for LOAS/LATM files with
    channel configuration indexes 9–21 (e.g. channel count 22.2
    for index 13) according to Rec. ITU-R BS.1196-7 & ISO/IEC
    23008-3:2019.
  Bug fixes:
  * mkvmerge: HEVC/H.265 parser: fixed invalid memory access
    that could happen when reading certain types of HEVC data
    (e.g. with changing parameter sets mid-stream) from certain
    containers (e.g. Matroska). This bug was introduced in
    release 56.0.0.
  * mkvextract: AAC: mkvextract will now abort with an useful
    error message when the user tries to extract a track whose
    'audio-specific config' element in `CodecPrivate` signals a
    number of channels of 7 or greater than 8 as that isn't
    supported by the ADTS format.
  Build system changes:
  * configure: the `--enable-ubsan` option hasn't actually
    enabled anything since release 39.0.0.

-------------------------------------------------------------------
Mon Apr  5 12:31:25 UTC 2021 - Luigi Baldoni <aloisio@gmx.com>

- Update to version 56.0.0
  New features and enhancements:
  * mkvmerge, mkvpropedit: tags: the programs will no longer
    write tag elements that are mandatory and set to their
    default value (e.g. "tag language" set to `und` =
    undetermined).
  * mkvmerge, mkvpropedit, MKVToolNix GUI chapter editor:
    chapters: the programs will no longer write chapter elements
    that are mandatory and set to their default value (e.g.
    "chapter language" set to `eng` = English or "Chapter flag
    enabled" = 1).
  * mkvextract: chapters: mkvextract will no longer add a
    `ChapterLanguage` element set to `eng` to the generated XML
    content if the source file doesn't contain such an element.
  * MKVToolNix GUI: multiplexer: when using the "tab widget
    below the files & tracks" layout option for the track
    properties the elements in the "general options" tab will
    use six rows à four columns instead of twelve rows à two
    columns, greatly reducing the required height.
  Bug fixes:
  * mkvmerge: AAC reader: fixed mkvmerge aborting to read AAC
    files bigger than 2 GB with a message about not being able
    to allocate memory.
  * mkvmerge: chapters: `ChapLanguageIETF` elements were still
    created when the option `--disable-language-ietf` was given
    after an option leading to the creation of chapters. Now the
    position doesn't matter anymore.
  * mkvmerge: chapters: when the option
    `--disable-language-ietf` is used, `ChapLanguageIETF`
    elements won't be written even when sources are read
    (Matroska files or XML chapters files) that do contain those
    elements.
  * mkvmerge: tags: when the option `--disable-language-ietf` is
    used, `TagLanguageIETF` elements won't be written.
  * mkvmerge: tags: mkvmerge will no longer write language
    elements for the track statistics tags it creates, making
    the effective language "undetermined" due to `und` being the
    default value for the legacy tag language element.
  * mkvmerge: tags: the XML tag parser will now validate all
    `<Simple>` children of `<Tag>` elements, not just the first
    for each `<Tag>`.
  * mkvmerge: tags: the XML tag parser now uses the
    spec-compliant `und` ("undetermined") as the default
    language for `<Simple>` tags instead of `eng`.
  * mkvmerge, mkvpropedit: tags: mkvmerge will no longer set the
    "target type" for track statistics tags (earlier it used
    `MOVIE`). The "target type value" will still be set to `50`.
  * mkvmerge, mkvextract: HEVC/H.265: both programs will now
    normalize the placement of VPS, SPS and PPS NALUs. Each key
    frame is prefixed with exactly one copy of the currently
    active parameter sets. This fixes certain classes of bugs
    related to splitting/appending.
  * mkvinfo: when compiled with newer versions of the `fmt`
    library, certain numbers were not output correctly (e.g. a
    track's audio sampling frequency of 48000 might be output as
    48).
  * MKVToolNix GUI: multiplexer: deriving the track language
    from the file name will match languages case insensitively
    again (like versions prior to v55).
  * MKVToolNix GUI: multiplexer: under certain circumstances
    keyboard shortcuts such as `Ctrl+W` for closing the active
    tab or `Ctrl+R` for starting to multiplex ceased to work
    until the user did certain other things (such as switching
    to a different tool & back to the multiplexer or opening the
    multiplexer menu). This started with v54.
  * MKVToolNix GUI: chapter editor: the editor will no longer
    create empty `ChapterCountry` elements when adding a chapter
    name with no default country selected in the preferences.
  Build system changes:
  * The bundled `fmt` library was updated to v7.1.3.

-------------------------------------------------------------------
Sat Mar  6 19:21:47 UTC 2021 - Luigi Baldoni <aloisio@gmx.com>

- Update to version 55.0.0
  Bug fixes:
  * MKVToolNix GUI: multiplexer: the user can now configure what
    to do when using the "Add source files" button independently
    of the setting for what happens when files are dragged &
    dropped onto the GUI. The same options are available, but
    they're distinct settings, allowing for different use cases.
  * MKVToolNix GUI: multiplexer: deriving the track language
    from file names doesn't use one big regular expression of all
    enabled languages anymore. Instead, the file name is split
    into parts on a list of characters (such as `.` or
    `(` and `)`; configurable in the preferences). This prevents
    the regular expression becoming too big for the regular
    expression library to handle when many languages are enabled.
  * MKVToolNix GUI: preferences: the language lists for
    "deriving track languages" and "enabling items by language"
    always included all the ISO 639-3 languages, even if those
    weren't enabled in the "often-used languages" pane.
  Other changes:
  * mkvmerge, MKVToolNix GUI multiplexer: the functionality for
    changing the length of the NALU "size" field for AVC/H.264
    and HEVC/H.265 tracks has been removed. The corresponding
    command-line option will continue to be recognized by
    mkvmerge as not to break existing third-party applications,
    but it won't actually do anything.

-------------------------------------------------------------------
Fri Feb 26 19:46:35 UTC 2021 - Luigi Baldoni <aloisio@gmx.com>

- Update to version  54.0.0
  New features and enhancements:
  * mkvmerge: added support for using ISO 639-3 language codes in
    IETF BF47 language tags.
  * mkvmerge: AC-3 parser: added support for byte-swapped AC-3
    data.
  * mkvmerge: Matroska reader: for audio tracks that have the bit
    depth track header set mkvmerge will now keep that header
    even for codecs that don't require it for decoding.
  * mkvmerge: MPEG transport stream reader, PCM audio tracks:
    mkvmerge will now re-order the channels for 5.1, 7.0 and 7.1
    channel tracks from the Blu-ray layout to the
    WAVEFORMATEXTENSIBLE layout expected in Matroska.
  * mkvmerge, mkvinfo, mkvpropedit, MKVToolNix GUI: added support
    for the following new track header elements: "hearing impaired"
    flag, "visual impaired" flag, "text descriptions" flag,
    "original" flag, "commentary" flag.
  * MKVToolNix GUI: added support for using ISO 639-3 language
    codes in IETF BF47 language tags. As there are several
    thousand of them, they're deactivated by default and must be
    activated in the preferences ("GUI" → "Often used selections"
    → "Languages").
  * MKVToolNix GUI: multiplexer: when adding Blu-rays the user
    can select multiple playlists to add simultaneously in the
    "select playlist to add" dialog.
  * MKVToolNix GUI: multiplexer: the file name extensions "eb3"
    and "ec3" were added for Dolby Digital Plus & "mpl" for Dolby
    TrueHD in the file dialogs.
  * MKVToolNix GUI: multiplexer: when adding multiple files the
    dialog asking the user what to do with them has gained a new
    checkbox. If enabled, all files containing at least one video
    track will always be placed in newly created multiplex
    setting.
  * MKVToolNix GUI: multiplexer: added a menu entry in the
    "Multiplexer" for adding all files that are currently in the
    clipboard.
  Bug fixes:
  * mkvextract: AAC: fixed wrong channel mask field in the ADTS
    headers for 7.1 channel layouts.
  * mkvextract: h.265/HEVC extraction: if the first frame starts
    with the parameter sets (SPS, PPS & VPS), the ones from
    CodecPrivate aren't written and the ones from the first frame
    are kept.
  * mkvmerge: fixed the calculation of chapter timestamps read
    from NTSC DVDs.
  * MKVToolNix GUI: IETF BCP 47 language widget: the language
    combo box will now always contain the language code the user
    enters in the free-form field, even if it isn't in the list of
    often-used languages the user configured in the preferences.
  * MKVToolNix GUI: multiplexer: when browsing for the
    destination file name the default directory is now chosen
    according to the preferences regarding how the destination
    file name should be formed. For example, if the policy is
    set to "fixed output directory" then that output directory
    will be the one initially set when the directory selection
    dialog is opened.
  * MKVToolNix GUI: multiplexer: fixed the removal of appended
    source files if the "delete source files" end-of-job action
    is enabled.
  * MKVToolNix GUI: chapter editor: when importing chapters from
    DVDs the IETF BCP 47 language elements will be set, too, not
    just the legacy language elements.
  Build system changes:
  * libEBML v1.4.2 and libMatroska v1.6.3 are now required. The
    optional, bundled copies of both libraries have been updated
    to those versions. This bump in requirements fixes several
    heap overflow bugs in libEBML.
  * MKVToolNix is now using the C++17 library feature "file
    system library" instead of Boost's "file system" and "system"
    libraries. For the GNU Compiler Collection (gcc) libstdc++
    this means v8 or newer is required; for clang's libc++ it
    means v7 or newer.

-------------------------------------------------------------------
Sat Jan 30 16:53:25 UTC 2021 - Luigi Baldoni <aloisio@gmx.com>

- Update to version 53.0.0
  New features and enhancements:
  * mkvmerge: AVI reader: added support for reading the video
    aspect ratio from the video properties header (`vprp` chunk)
    if present and setting the display dimensions accordingly.
  * mkvmerge: MP4 reader: for h.264/AVC tracks that don't have an
    `AVCConfigurationBox` (`avcC` atom) in their sample
    description (`stsd`) atom or whose `avcC` atom contains no
    content `mkvmerge` will now re-derive the
    `AVCConfigurationBox` from the bitstream.
  * mkvextract: mkvextract will now check if any of the
    destination file names is the same as the source file name
    and abort with an error if that's the case.
  * MKVToolNix GUI: when querying the user for a file name for
    saving things (e.g. multiplexer settings or an attachment in
    the header editor), the automatically suggested file name
    will now be based on the situation-specific file names (e.g.
    the destination file name for multiplexer settings or the
    attachment's name when saving an attachment in the header
    editor) instead of the directory's name.
  * MKVToolNix GUI: multiplexer: when deriving track languages
    from file names the GUI will now select the right-most match
    instead of the left-most one. For example,
    "La.vie.en.rose.(fr).srt" will now be detected as French (fr)
    instead of English (en).
  * MKVToolNix GUI: preferences: the items in the "pre-defined
    …" lists can now be renamed by double-clicking with the
    mouse or pressing the F2 key.
  Bug fixes:
  * mkvmerge: stretching chapter timestamps with
    `--chapter-sync` now works correctly with floating point
    values including fractions of floating point numbers (e.g.
    `12.3/45.67`). The tooltips in the GUI have been adjusted
    accordingly.
  * mkvmerge: MPEG 1/2 video handling: the "default duration"
    header field was often half the value it actually should be,
    resulting in all video frames having an explicit block
    duration with the correct value.
  * mkvmerge: MPEG 1/2 video handling: the data stored in `Codec
    private` and `Codec state` doesn't contain extensions other
    than sequence & sequence display extensions anymore.
  * mkvmerge: tag handling: when remuxing a Matroska file with
    the `--no-track-tags`, existing `SOURCE_ID` track tags are
    now skipped, too.
  * MKVToolNix GUI: multiplexer: the drop-down boxes with
    pre-defined track names now follow the order set in the
    preferences instead of sorting the entries alphabetically.

-------------------------------------------------------------------
Tue Jan  5 09:28:45 UTC 2021 - aloisio@gmx.com

- Update to version 52.0.0
  New features and enhancements:
  * MKVToolNix GUI: job queue: the maximum number of jobs to run
    concurrently can now be increased in the preferences. The
    default remains at 1.
  * MKVToolNix GUI: the GUI will now add a context-specific
    default extension to file names selected for saving on
    platforms that don't add one itself (e.g. GNOME). For
    example, when saving multiplexer settings the extension
    `.mtxcfg` will be added.
  * MKVToolNix GUI: added an option to the preferences for the
    window to stay on top of other windows.
  Bug fixes:
  * mkvextract: h.265/HEVC extraction: the code for skipping
    extraction of prefix SEI NALUs in the first frame was
    skipping two bytes too few, resulting in broken processing
    of all following bytes.
  * libEBML: the optional, bundled version of libEBML was
    updated to v1.4.1.
  Build system changes:
  * libEBML v1.4.1 is now required due to a bug in libEBML that
    caused pointers to just-freed memory being returned to the
    caller under certain invalid data constellations, causing
    use-after-free errors in all of MKVToolNix's programs.

-------------------------------------------------------------------
Sun Oct  4 13:09:56 UTC 2020 - Luigi Baldoni <aloisio@gmx.com>

- Update to version 51.0.0
  New features and enhancements:
  * mkvmerge, mkvpropedit, MKVToolNix GUI: IETF BCP 47 language
    tags: added missing support for UN M.49 regions for which
    there are no corresponding ISO 3166 alpha codes. This
    enables language tags such as `es-419` = Spanish in
    Latin America and the Caribbean.
  * MKVToolNix GUI: IETF BCP 47 language tags: the text in the
    widget displaying the current language & the corresponding
    edit button is now displayed like a link (depending on the
    theme: different color & underlined), making it clearer
    that not just the edit button can be clicked but the text,
    too.
  Bug fixes:
  * mkvmerge: AV1 parser: fixed mkvmerge crashing after uncaught
    exceptions due to certain data conditions. Found by fuzzying.
  * mkvmerge: AV1 packetizer: the duration of frames wasn't set
    properly. When appending AV1 IVF or OBU files this meant that
    the last frame of the Nth file and the first frame of file
    N+1 had the same timestamp.
  * mkvmerge: DTS reader: fixed handling of buffers with an odd
    length when byte-swapped DTS is detected so that mkvmerge
    doesn't abort with a failed assertion. Found by fuzzying.
  * mkvmerge: h.264/AVC and h.265/HEVC elementary stream
    readers: mkvmerge will no longer claim to recognize data
    that looks like AVC or HEVC but with invalid video
    width/height values as that lead to failed assertions in
    libEBML later. Found by fuzzying.
  * mkvmerge: h.265/HEVC parser: fixed mkvmerge aborting after
    uncaught exceptions due to certain data constellations found
    by fuzzying.
  * mkvmerge: IVF reader: fixed mkvmerge crashing with a
    "division by zero" error due to certain data conditions.
    Found by fuzzying.
  * mkvmerge: fixed mkvmerge aborting with a "division by zero"
    error due to the timestamp scaling factor being 0 after
    handling certain data constellations. Found by fuzzying.
  * mkvmerge: track statistics: fixed a "division by zero" error
    when the content's shorter than 1ms. Found by fuzzying.
  * mkvmerge, mkvinfo, mkvextract, mkvpropedit: Matroska access
    class: fixed an invalid memory access under certain data
    conditions. Found by fuzzying.
  * MKVToolNix GIU: IETF BCP 47/RFC 5646 language tags: the GUI
    will no longer open the language dialog when clicking on a
    disabled language display widget.
  * MKVToolNix GUI: IETF BCP 47 language tags: the "variants"
    combo-boxes were not populated even when the language tag was
    valid and contained at a variant.
  * MKVToolNix GUI: IETF BCP 47 language tags: when no language
    is selected, at least one of the other components (extended
    subtags, region, or variants) has something selected and
    "private use" is not empty, the GUI would claim this to be a
    valid tag, which it isn't.
  * MKVToolNix GUI: multiplexer: when the tracks/chapters/tags
    selection changes from "at least one entry selected" to "no
    entry selected", the input controls will be reset to their
    default state and not just disabled.
  Build system changes:
  * `configure` now checks for the presence of the a system-wide
    installed copy of the JPCRE2 C++ wrapper library for the
    PCRE2 library and uses that if it's new enough (at least
    v10.32.1). If not, the bundled version will be used as a
    fallback.

-------------------------------------------------------------------
Sun Sep  6 15:01:13 UTC 2020 - aloisio@gmx.com

- Update to version 50.0.0
  New feature: IETF BCP 47 language tags:
  * I've written up a [nice FAQ
    https://gitlab.com/mbunkus/mkvtoolnix/-/wikis/Languages-in-Matroska-and-MKVToolNix
    about the switch to using IETF BCP 47 language tags, how
    they interact with legacy language elements, how the programs
    actually behave and how to disable their use if necessary.
  * mkvmerge: IETF BCP 47/RFC 5646 language tags: mkvmerge will
    now accept full BCP 47 language tags for all options taking
    a language. mkvmerge will always write "LanguageIETF" track
    header elements. If the language tag contains a valid ISO
    639-2 language code it will also set the legacy "Language"
    track header element to the included ISO 639-2 code.
  * mkvmerge: IETF BCP 47/RFC 5646 language tags: if present the
    "LanguageIETF" track header element will be reported as the
    `language_ietf` property in JSON identification mode.
  * mkvmerge: IETF BCP 47/RFC 5646 language tags in chapters:
    mkvmerge will now write "ChapLanguageIETF" elements when
    creating chapter atoms, either when reading the simple
    chapter format or when generating
    chapters due to the `--generate-chapters` command line
    option.
  * mkvmerge: IETF BCP 47/RFC 5646 language tags in tags:
    mkvmerge will now write "TagLanguageIETF" elements when
    creating "simple tag" elements, either when reading tag XML
    files or when generating them.
  * mkvmerge: IETF BCP 47/RFC 5646 language tags: added an option
    `--disable-language-ietf` that causes mkvmerge to only write
    the legacy language elements.
  * mkvmerge, mkvpropedit, MKVToolNix GUI's chapter editor: IETF
    BCP 47/RFC 5646 language tags in chapters: when reading XML
    chapter files the programs will now add "ChapLanguageIETF"
    elements for atoms that don't contain them. The values are
    derived from existing "ChapterLanguage" elements.
  * mkvpropedit: IETF BCP 47/RFC 5646 language tags:
    setting/deleting the track language now acts on both the old
    language element as well as the "LanguageIETF" track header
    element.
  * mkvpropedit: IETF BCP 47/RFC 5646 language tags: added an
    option `--disable-language-ietf` that causes mkvpropedit to
    apply changes to the `language` track header property only
    to the legacy language track header element.
  * mkvinfo: IETF BCP 47/RFC 5646 language tags: added support
    for the "LanguageIETF" track header element.
  * MKVToolNix GUI: multiplexer: added full support for IETF BCP
    47/RFC 5646 language tags for both track and chapter
    languages.
  * MKVToolNix GUI: chapter: added full support for IETF BCP
    47/RFC 5646 language tags for chapter languages.
  * MKVToolNix GUI: header editor: added full support for IETF
    BCP 47/RFC 5646 language tags for track header languages.
    The header editor allows editing of the legacy language
    elements and the IETF BCP 47 language elements independent
    of each other.
  Other new features and enhancements:
  * mkvmerge: the chapter generation mode `when-appending` now
    also works with the splitting modes `parts:` &
    `parts-frames:` when using the `…,+…` syntax for appending
    other sections of the source file to the same  destination
    file.
  * MKVToolNix GUI: multiplexer: the file selection dialogs now
    include the extension `.dtsma` for DTS files.
  * mkvmerge: MP4 reader: sped up parsing MP4 DASH files with a
    lot of segments (`trun` atoms) quite a bit.
  * The PCRE2 regular expression library is now used instead of
    `std::regex` for big performance improvements in all places
    where regular expressions are used for parsing big chunks of
    text, e.g. in the subtitle parsers.
  Bug fixes:
  * MKVToolNix GUI: preferences: under certain conditions
    changing the selected entry in the page tree on the left did
    not cause the page shown on the right to be updated.
  * mkvmerge: splitting text by a fixed string (e.g. `,`) is now
    done by using `std::string.find()` instead of using a
    regular-expression-based text splitting function, greatly
    improving its performance.
  * mkvmerge: MP4 reader: fixed handling of `tkhd` atoms of
    version 1.
  Build system changes:
  * The PCRE2 library (the 8-bit variant) is now required.

-------------------------------------------------------------------
Sun Aug  2 16:05:18 UTC 2020 - aloisio@gmx.com

- Update to version 49.0.0
  New features and enhancements:
  * mkvmerge: added support for copying the new track header
    elements `BlockAddIDName`, `BlockAddIDType`,
    `BlockAddIDValue` and `BlockAddIDExtraData` from Matroska
    files if they exist.
  * mkvinfo: added support for the new track header elements
    `BlockAdditionMapping`, `BlockAddIDName`, BlockAddIDType`,
    `BlockAddIDValue` and `BlockAddIDExtraData`.
  * MKVToolNix GUI: multiplexer: the list of recent directories
    can now be edited in the preferences → "Multiplexer" →
    "Destination file name".
  * MKVToolNix GUI: preferences: the values in the various
   "predefined values" lists can now be re-ordered freely by
    dragging & dropping.
  Bug fixes:
  * mkvmerge: Matroska reader: when reading tracks (e.g. a
    subtitle track) from Matroska files with their `default
    track` flag set to `yes`, and when overwriting those via the
    command line to `no`, `mkvmerge` would not promote
    additional tracks of the same type from other files (e.g.
    another subtitle track from an SRT file).
  * mkvmerge: SRT reader: empty lines inside entries were
    doubled.
  * mkvmerge: subtitles: when calculating the rounded duration
    of each entry the error from rounding the corresponding
    timestamp will be taken into account.
  * mkvextract: SSA/ASS extraction: mkvextract is no longer
    inserting empty lines before the `Dialogue:` lines.
  * mkvextract: USF subtitles: start & end timestamps were too
    high by a factor of 1.000.000.
  * MKVToolNix: info tool: when saving to a text file the
    checkbox "Save as default for saving output to text files"
    did nothing.
  * MKVToolNix: info tool: when saving to a text file in "all
    elements in a tree-like structure" mode, the GUI always
    stopped at the first cluster regardless of the setting of
    the "verbosity" option.
  * MKVToolNix GUI: preferences: when tooltips were disabled the
    dialogs for adding new entries to the various "predefined
    values" lists were missing their texts.
  * configure: fixed detection of QtDBus. Fixes #2886.
  Build system changes:
  * libMatroska v1.6.1 is now required. The bundled version has
    been updated to that version.
 
-------------------------------------------------------------------
Sun Jun 28 05:55:10 UTC 2020 - Luigi Baldoni <aloisio@gmx.com>

- Update to version 48.0.0
  New features and enhancements:
  * mkvmerge: AC-3: file identification will report AC-3 tracks
    encoded in Dolby Surround EX as codec "AC-3 Dolby Surround
    EX".
  * MKVToolNix GUI: multiplexer: on new installations the GUI
    will now recognize all known ISO 639-2 language codes in file
    names by default instead of only the top 100 of languages by
    native speakers.
  * MKVToolNix GUI: multiplexer: on new installations the list
    of "often used languages" will by default only contain
    certain agnostic ones ("multiple languages", "no linguistic
    content", "reserved for local use", "uncoded languages"),
    "English" and the default user interface language. The "list
    of spoken languages by native speaks" isn't used anymore.
  * MKVToolNix GUI: header editor: added an option to remove all
    attachments to the tree context menu.
  * MKVToolNix GUI: while the GUI is running it will remember
    the last page that was selected when the preferences dialog
    is closed. Upon re-opening the preferences that page will be
    selected by default.
  Bug fixes:
  * mkvmerge: fixed a segmentation fault when exiting
    prematurely due to write errors such as the destination
    having run out of space.
  * mkvmerge: DTS: fixed wrong channel count for DTS tracks with
    XCh extensions.
  * mkvmerge: MPEG TS reader: fixed detecting h.264/AVC and
    h.265/HEVC tracks that consist of only a single frame.
  * mkvmerge: MPEG TS reader: fixed handling of unbounded PES
    sizes for tracks that consist of only a single PES packet.
  * mkvmerge: MPEG TS reader: PGS subtitle tracks are now exempt
    from the "detect bogus subtitle timestamps" heuristic which
    could lead to some PGS subtitles not being timestamped
    correctly. Symptoms were that they were shown at the wrong
    time or that they were shown indefinitely.
  * mkvmerge: MPEG TS reader: when reading MPLS playlists the
    start timestamps of a play items were handled wrong: all the
    timestamps of packets read were compared to that start
    timestamp, dropping those packets whose timestamps were
    smaller than the play item's start timestamp. The correct
    behavior is to accept all packets as soon as the first one
    with a timestamp equal to or larger than the play item's
    start timestamp is encountered. This could result in PGS
    subtitle entries located right at the start of the play item
    being garbled/lost as they consist of multiple PES packets
    for which some timestamps are often slightly smaller.
  * mkvmerge: MPEG TS reader: when reading MPLS playlists
    mkvmerge will no longer read the whole M2TS files they
    reference, processing only the packets lying inside the
    timestamp range given by the playlists's play item's start &
    end timestamps. Instead mkvmerge will use the index
    information present in corresponding clip information (CLPI)
    files in order to seek to the nearest file position of the
    play item's start timestamp. Additionally mkvmerge will
    simply stop processing a file once the end timestamp is
    seen. This change greatly speeds up processing files from
    which only small portions must be read.
  * mkvmerge: WavPack: fixed support for files created by v5 of
    the program. Checksums, DSD audio data and non-standard
    sampling rates are handled correctly.
  * MKVToolNix GUI: multiplexer: fixed the cursor being
    positioned wrong after entering or pasting characters that
    aren't allowed in file names into the "destination file"
    control.
  Build system changes:
  * libEBML v1.4.0 and libMatroska v1.6.0 are now required.
  Other changes:
  * The source code repository's main development branch was
    renamed to `main`.

-------------------------------------------------------------------
Tue Jun  2 14:46:11 UTC 2020 - Michel Normand <normand@linux.vnet.ibm.com>

- Add _constraints file to avoid build error for ppc64/ppc64le

-------------------------------------------------------------------
Sat May 30 13:32:44 UTC 2020 - Luigi Baldoni <aloisio@gmx.com>

- Update to version 47.0.0
  New features and enhancements:    
  * mkvmerge: chapters: mkvmerge can now read chapters from DVDs
    if the user specifies the path to a DVD folder structure via
    the `--chapters …` parameter. By default chapters from the
    first title will be imported. This can be changed by append
    `:<title number>` to the file/directory name in the
    `--chapters …` argument, e.g. `--chapters
    /srv/dvds/BigBuckBunny/VIDEO_TS:3`. This feature requires
    mkvmerge to have been built with the `libdvdread` library.
  * mkvmerge: added `--engage append_and_split_flac` that
    enables mkvmerge to append and split FLAC tracks, restoring
    pre-v45 behavior. The resulting tracks will be broken: the
    official FLAC tools will not be able to decode them and
    seeking will not work as expected.
  * MKVToolNix GUI: multiplexer: added support for mkvmerge's
    new support for reading chapters from DVDs if both have been
    built with the `libdvdread` library.
  * MKVToolNix GUI: multiplexer: when deriving languages from
    file names the GUI will now look for simplified language
    names instead of the full ones (e.g. instead of looking for
    "Greek, Modern (1453-)" it would simply look for "Greek").
  * MKVToolNix GUI: multiplexer: the options in the "additional
    command-line options" dialog are now sorted alphabetically.
    Additionally the `--append-mode` option has been added as
    one of the only missing global options.
  * MKVToolNix GUI: chapter editor: the chapter editor can now
    read chapters from DVDs if MKVToolNix has been built with
    the `libdvdread` library.
  * MKVToolNix GUI: header editor: added an option in the
    preferences for displaying all date & time values in UTC
    instead of the local time zone.
  Bug fixes:
  * all: fixed a crash when using the `MTX_LOGGER=file` syntax
    for logging debug messages without specifying a file name to
    log to. It will now log to a file called
    `mkvtoolnix-debug.log` in the system's default temporary
    directory, as initially intended.
  Build system changes:
  * The `libdvdread` library will be used if found via
    `pkg-config`. If it is found, support for reading chapters
    from DVDs will be enabled in `mkvmerge` and the MKVToolNix
    GUI.
  * Boost's Date/Time, Lexical Cast, Range, Range Adaptors,
    Tri-Bool, Variant libraries are not used anymore.
  * MKVToolNix now requires a C++ compiler & standard library
    that support the following features of the C++17 standard:
    "`std::variant`", "`std::gcd`". For the GNU Compiler
    Collection (gcc) this means v7 or newer; for clang it means
    v4 or newer — the same versions required by earlier
    MKVToolNix versions.
  * MKVToolNix now requires version 6.1.0 of fmtlib or later for
    the `fmt::to_string` function and bugfixes to the formatting
    of floating point numbers. If a system-wide version is
    installed that's older, the bundled copy will be used.

-------------------------------------------------------------------
Fri May  1 10:35:21 UTC 2020 - Luigi Baldoni <aloisio@gmx.com>

- Update to version 46.0.0
  New features and enhancements:
  * mkvmerge: when splitting, the placeholder `%c` can be used
    in the destination file name. It'll be replaced by the name
    of the first chapter in the file. Implements #2791.
  * mkvmerge: when reading MPLS playlists mkvmerge will include
    a tag named `SOURCE_ID` in the track's statistics tags that
    conveys the fact that the source was a Blu-ray and what the
    track's ID was in the source container. When reading Matroska
    file existing `SOURCE_ID` tags will be kept. The format used
    is the same format MakeMKV uses. Implements #2774.
  * mkvmerge: for audio-only files mkvmerge will now write a cue
    entry every 500ms instead of every 2s.
  * MKVToolNix GUI: job actions: split up the option "execute
    when the job finishes successfully or with warnings" into two
    separate options: "…when finishes successfully" and "…when
    exits with warnings". Implements #2798.
  Bug fixes:
  * mkvmerge: Matroska reader: when regenerating UIDs for
    chapters mkvmerge will now fix referencing tag chapter UID
    targets to have the same values. Fixes #2804.
  * mkvmerge: MP4 reader: fixed a crash that could potentially
    happen while trying to identify H.265/HEVC tracks.
  * mkvmerge: MP4 reader: when reading H.265/HEVC tracks without
    a frame offset table (`ctts` atom) present, mkvmerge did not
    parse the `hevcC` structure correctly in certain cases,
    causing no video frames to be output at all or the output not
    being playable. This fixes #2782, a bug introduced in v45.
  * mkvmerge: MPLS handling/MPEG TS reader: timestamp
    restrictions as given in an MPLS file were only honored for
    the first play item, not for subsequent play items. For those
    play items the whole referenced file was always copied. Part
    of the fix of #2789.
  * mkvmerge: MPLS handling/MPEG TS reader: under certain
    circumstances mkvmerge copied one frame too many before
    switching to the next play item. Part of the fix of #2789.
  * mkvmerge: for audio-only files cues will only be created for
    I frames (important for e.g. TrueHD where decoding can only
    start on a sync frame). Fixes #2790.
  * MKVToolNix GUI: fixed a crash that happened when closing the
    preferences after having closed at least one multiplexer tab.
    Fixes #2785.

-------------------------------------------------------------------
Sat Apr  4 15:54:45 UTC 2020 - Luigi Baldoni <aloisio@gmx.com>

- Update to version 45.0.0
  New features and enhancements:
  * mkvmerge: mkvmerge has never supported appending & splitting
    FLAC audio tracks. mkvmerge will now emit error messages
    when the user attempts either instead of continuing and
    creating invalid FLAC tracks.
  * MKVToolNix GUI: added an option in the preferences to turn
    on eliding text on tab headers. If enabled, tab names will be
    shortened so that all tab headers fit into the window's
    width. Implements #2768.
  * MKVToolNix GUI: added an option in the preferences to
    disable all tooltips.
  * MKVToolNix GUI: multiplexer: if the file identification
    fails due to a JSON parser error, the output generated by
    `mkvmerge` will be output to `STDERR` allowing insight into
    what's gone wrong.
  * MKVToolNix GUI: multiplexer: if an error occurs during file
    identification, the name of the processed file will be
    mentioned in the error message.
  * MKVToolNix GUI: multiplexer: if an error occurs during
    identification of multiple files, the GUI will ask the user
    whether to continue or abort the identification process.
    Implements #2778.
  * MKVToolNix GUI: job queue: added an option in the
    preferences for removing completed jobs when exiting the
    program depending on their status. Implements #2769.
  Bug fixes:
  * mkvmerge: H.265/HEVC packetizer: fixed changing the NALU
    size length, it was using the wrong offset into the `hevcC`
    structure.
  * mkvmerge: MP4 reader: fixed calculating the duration of
    video tracks that only contain a single frame. Fixes #2747.
  * mkvmerge: MP4 reader: if there's no frame offset table
    (`ctts` atom) present for H.265/HEVC video tracks, mkvmerge
    will determine the timestamp order itself instead of relying
    on the timestamps in the MP4 being in the presentation order
    required by Matroska. Fixes #2777.
  * MKVToolNix GUI: multiplexer: when using the title as part of
    the destination file name (both automatically as well as
    using the "copy title to destination file name" function) all
    characters that aren't valid in a file name are replaced by
    hyphens.
  * MKVToolNix GUI: multiplexer: the "copy title to destination
    file name" function was broken when the "make file name
    unique" option in the preferences was disabled. In that case
    the file base name was removed regardless of what the title
    was set to at the time.
  * MKVToolNix GUI: multiplexer: when adding Blu-ray playlists
    the GUI used to only look for the English version of the disc
    library information (title & cover images). Now the GUI will
    present all disc library entries in the "select playlist to
    add" dialog & let the user chose which one to use (if any).
    Fixes #2765.
  * MKVToolNix GUI: multiplexer, info tool: fixed the "warn
    before overwriting" check wrt. jobs creating the same file.
    Fixes #2758.

-------------------------------------------------------------------
Mon Mar  9 08:19:36 UTC 2020 - aloisio@gmx.com

- Update to version 44.0.0
  New features and enhancements:
  * MKVToolNix GUI: header editor: the attachments can now be
    reordered via drag & drop. Implements #2753.
  Bug fixes:
  * mkvmerge: Matroska reader: when encountering certain errors
    in the track headers such as the codec ID not being present
    mkvmerge will simply skip those tracks instead of exiting
    with an error. Fixes #2737.
  * MKVToolNix GUI: multiplexer: the "ask before overwriting"
    functionality did not look for the correct file names when
    splitting was active. Fixes #2741.

-------------------------------------------------------------------
Mon Jan 27 17:01:07 UTC 2020 - Luigi Baldoni <aloisio@gmx.com>

- Update to version 43.0.0
  New features and enhancements:
  * MKVToolNix GUI: using one of the command line options
    `--info`, `--edit-headers` or `--edit-chapters` will make
    the GUI select the corresponding tool on startup even if no
    further file name is given. Implements #2723.
  * MKVToolNix GUI: multiplexer: added a setting in the
    preferences for changing the location of the MediaInfo
    executable for when the user accidentally selected the wrong
    one.
  Bug fixes:
  * mkvmerge: AVC/h.264 parser: the order of the NALUs before
    each key frame was sometimes wrong: mkvmerge wrote SPS & PPS
    after SEI NALUs. Now SPS & PPS NALUs are always written
   before the other NALUs. Patch by Torsten Hauska. Part of the
   implementation of #2709 and part of the fix of #2250.
  * mkvmerge: AVC/h.264 parser: when additional SPS or PPS NALUs
    (with IDs that haven't been seen so far) are found
    mid-stream, mkvmerge will prepend all following key frames
    with all current valid SPS & PPS NALUs (just like when SPS &
    PPS NALUs are overwritten mid-stream). Part of the fix of
    #2250.
  * mkvmerge: MPEG TS reader: fixed detection of MPEG-1/2 video
    tracks consisting of very few frames. Fixes #2732.
  * mkvmerge: Ogg Opus reader: fixed the handling of Ogg Opus
    streams that contain a just one Ogg page (`mkvmerge` aborted
    with an exception). Fixes #2722.
  * MKVToolNix GUI: multiplexer: dragging & dropping XML files
    with chapters or tags to the GUI's window was broken in v42.
    Instead of adding the file names to the appropriate input
    boxes the GUI was running mkvmerge for file identification
    purposes which then failed. Fixes #2718.

-------------------------------------------------------------------
Thu Jan  2 14:25:15 UTC 2020 - Luigi Baldoni <aloisio@gmx.com>

- Update to version 42.0.0
  New features and enhancements:
  * mkvmerge: added an option for creating byte-identical files:
    `--deterministic <seed>`. Part of the implementation of
    #2698.
  * mkvmerge: Matroska reader: mkvmerge will remove the `icpf`
    atom headers if they're present in frames read from Matroska
    files. Implements #2692.
  * mkvmerge: MP4 reader: ALAC tracks: the number of channels,
    sampling frequency and bit depth are now taken from the
    bitstream in order to fix bogus values on the container level.
    Implements #2714.
  * mkvpropedit: when changing track UIDs the referring elements
    in existing chapters & tags will be updated automatically,
    too. Part of the implementation of #2700.
  * mkvinfo: when the option `-p`/`--hex-positions` is used,
    element positions will be output regardless of the verbosity
    level. Part of the implementation of #2713.
  * mkvinfo: added the option `-P`/`--positions` for showing the
    position of each element in decimal regardless of the
    verbosity level used. Part of the implementation of #2713.
  * mkvinfo: added the option `-o`/`--continue` for continuing
    processing when the first cluster is encountered regardless
    of the verbosity level used. Part of the implementation of
    #2713.
  * mkvinfo: added the option `-a`/`--all` for outputting all
    sub-elements (even cues & seek head entries) and not
    stopping at the first cluster regardless of the verbosity
    level used. Part of the implementation of #2713.
  * MKVToolNix GUI: multiplexer: added an option in the
    preferences for disabling adding cover images from Blu-ray
    discs. Implements #2693.
  * MKVToolNix GUI: multiplexer: added mkvmerge's new
    `--deterministic` option in the "additional command-line
    options" dialog. Part of the implementation of #2698.
  * MKVToolNix GUI: header editor:: when changing track UIDs the
    referring elements in existing chapters & tags will be
    updated automatically, too. Part of the implementation of
    #2700.
  Bug fixes:
  * mkvmerge: HEVC ES parser: fixed a bug in the slice parser
    calculating the size of a field which in turn could have led
    to the slice's type being read wrong. Patch by Torsten
    Hauska. Fixes #2710.
  * mkvmerge: Matroska reader: fixed a segmentation fault when
    trying to read a file that uses header removal compression
    but no removed bytes are present in the track headers. Fixes
    #2687.
  * mkvmerge: MPEG elementary stream parser: fixed an invalid
    memory access and use of uninitialized memory that could
    happen under certain circumstances. Fixes #2690.
  * mkvmerge: RealMedia reader: fixed a division by zero when
    all audio timestamps were zero. Fixes #2689.
  * mkvmerge: RealMedia reader: fixed an invalid memory access
    in the video frame assembly code triggered by invalid data
    in the file. Fixes #2691.
  Build system changes:
  * `std::optional` (C++17 feature) is now used instead of
    `boost::optional`.
  * `std::regex` is now used instead of `boost::regex`.
  Other changes:
  * New man page translations into French, Italian, Russian and
    Chinese Traditional have been added.

-------------------------------------------------------------------
Fri Dec  6 18:55:59 UTC 2019 - Luigi Baldoni <aloisio@gmx.com>

- Update to version 41.0.0
  New features and enhancements:
  * mkvmerge: Matroska reader: Vorbis tracks: stream comments
    (aka Vorbis comments) will be converted to Matroska
    attachments (for cover arts) and Matroska track tags (for
    other comments). Additionally the stream comments will be
    removed from Vorbis headers.
  * mkvmerge: MP4 reader: added support for reading Opus audio
    from MP4 files. Part of the implementation of #2673.
  * mkvmerge: MP4 reader: added support for reading VP9 video
    from MP4 files. Part of the implementation of #2673.
  * mkvmerge: Ogg reader: Vorbis, Opus & VP8 streams: stream
    comments (aka Vorbis comments) will be converted to Matroska
    attachments (for cover arts) and Matroska track tags (for
    other comments). Additionally the stream comments will be
    removed from Vorbis headers.
  * mkvmerge: WAV reader: added support for reading RF64 files.
  * MKVToolNix GUI: multiplexer: the list of predefined track
    names is now split up into three lists, one for each track
    type (audio, video & subtitles). Part of the implementation
    of #2654.
  * MKVToolNix GUI: multiplexer: when trying to add thumbnails
    for a Blu-ray the GUI will determine the thumbnail's pixel
    size from the thumbnail files if the XML file doesn't
    contain that information. This works for JPEG and PNG files.
    Implements #2674.
  * MKVToolNix GUI: general: line edits & combo boxes will now
    have a "clear text" button appear whenever they're not
    empty. Part of the implementation of #2654.
  * MKVToolNix GUI: update check: the dialog showing the latest
    news & version information states explicitly where the links
    take the user (the MKVToolNix `NEWS.md` file and YouTube
    respectively).
    Bug fixes:
  * mkvmerge: Matroska reader: mkvmerge did not copy the codec's
    private data when reading WavPack from Matroska files. Fixes
    #2685.
  * mkvmerge: MPLS handling: re-added caching when using MPLS
    playlists as input files. Fixes #2666.
  * mkvmerge: MPEG TS reader: when reading an MPLS playlist, the
    calculation of the minimum timestamp to use for shifting all
    output timestamps to zero was wrong. It was wrongfully
    considering timestamps from packets it would not copy due to
    the MPLS's timestamp restrictions. This could lead to the
    first timestamps in the output file being quite large, e.g.
    more than a couple of minutes, causing sync problems when
    multiplexing together with other files. Fixes #2670.
  * MKVToolNix GUI: multiplexer: the automatic switch between
    aspect ratio & display width/height wasn't reflected in the
    configuration generated for `mkvmerge`. The user had to
    change between the two settings manually. Fixes #2660.
  * MKVToolNix GUI: multiplexer: the progress dialog shown when
    scanning a Blu-ray wasn't closed properly in certain
    situations. Fixes #2678.
  * MKVToolNix GUI: general: the configured font was not applied
    to a lot of controls (e.g. the file & track lists or the
    menu entries) on application startup. Instead the user had
    to open & close the preferences in order for the font to be
    applied to all controls. Fixes #2671.

-------------------------------------------------------------------
Sat Nov  9 13:38:39 UTC 2019 - Luigi Baldoni <aloisio@gmx.com>

- Update to version 40.0.0
  New features and enhancements:
  * mkvmerge: MP4 reader: added support for BMP covert art
    images.
  * MKVToolNix GUI: multiplexer: added an option to disable
    deriving the destination file name from the file title.
    Implements #2648.
  * MKVToolNix GUI: multiplexer: the content of the
    "stereoscopy" combo box has been simplified making the box's
    minimum width much smaller, allowing the user to resize the
    GUI's whole window to a much smaller width.
  * MKVToolNix GUI: multiplexer: whenever the user changes the
    "aspect ratio" or "display dimensions" controls, the
    corresponding radio button will be activated automatically.
    Implements #2651.
  * MKVToolNix GUI: Windows: added a setting in the preferences
    to disable the GUI's dark color mode even if Windows's app
    color mode is set to dark. Implements #2646.
  * MKVToolNix GUI: Windows: replaced the dark mode introduced
    in v39 with another dark mode that's less wasteful with
    space between widgets.
  Bug fixes:
  * mkvmerge: MP4 reader: mkvmerge was reading eight bytes too
    many for cover art images. This could cause file
    identification to fail when the cover art was located at the
    end of the MP4 file. Even if it succeeded, this meant too
    much data present in the attachment. Fixes #2650.
  * mkvmerge: MP4 reader: covert art images with unknown image
    types will be skipped instead of treated as JPEG images.
  Build system changes:
  * Qt 5.9.0 or newer is now required for building MKVToolNix
    GUI.

-------------------------------------------------------------------
Tue Nov  5 08:20:29 UTC 2019 - Luigi Baldoni <aloisio@gmx.com>

- Update to version 39.0.0
  New features and enhancements:
  * mkvmerge: Blu-ray: when reading an MPLS playlist mkvmerge
    will look up and use chapter names from the Blu-ray's
    "track/chapter names" meta data if it exists. Part of the
    implementation of 2486.
  * mkvmerge: MP4 reader: if present, cover art images (the
    `meta.udta.ilist.covr` atom) will be converted into
    attachments.
  * MKVToolNix GUI: multiplexer: when adding a playlist from a
    Blu-ray disc, the disc library meta data will be parsed, and
    the biggest thumbnail, if present, will be added as a new
    attachment with name `cover.jpg` (extension depends on
    thumbnail's extension). Implements #2644.
  * MKVToolNix GUI: multiplexer: when adding a playlist from a
    Blu-ray disc, the title from the disc library meta data will
    be set as the new file title if the disc library meta data
    contains one & no title has been set yet.
  * MKVToolNix GUI: multiplexer: the automatically generated
    destination file name will now be based on the file title if
    one is set at that point. This works in conjunction with the
    title being said from the Blu-ray disc library meta data.
  * MKVToolNix GUI: chapter editor: when reading chapters from
    an MPLS playlist the GUI will look up and use chapter names
    from the Blu-ray's "track/chapter names" meta data if it
    exists. Part of the implementation of 2486.
  * MKVToolNix GUI: Windows: added a dark mode that's enabled
    when Windows 10's dark mode is turned on.
  * translations: added a Bulgarian translation of the programs
    & the man pages by Симеон Цветков (see `AUTHORS`).
  Bug fixes:
  * mkvmerge: attachments without a file name won't be ignored
    anymore. Part of the fix of #2642.
  * MKVToolNix GUI: header editor: attachments with an empty
    name element will be shown as `<unnamed>` as originally
    intended. Part of the fix of #2642.
  * Linux AppImage: the AppImage will no longer change
    directories before running the desired executable allow the
    use of relative file names. Fixes #2632.
  Build system changes:
  * MKVToolNix now requires a C++ compiler that supports the
    following features of the C++17 standard: "`[[maybe_unused]]`
    attribute", "nested namespace definition",
    "structured bindings". For the GNU Compiler Collection (gcc)
    this means v7 or newer; for clang it means v4 or newer.
  * Boost 1.60.0 or newer is now required.

- Use system nlohmann-json

- Spec cleanup

-------------------------------------------------------------------
Sun Oct  6 13:53:57 UTC 2019 - Luigi Baldoni <aloisio@gmx.com>

- Update to version 38.0.0
  New features and enhancements:
  * mkvextract: chapters, tags & cue sheets will now be written
    to standard output if no file name is given, same as if `-`
    is given as the file name.
  * MKVToolNix GUI: job queue: added a new setting in the
    preferences' "job queue & job status" section that, when
    enabled, will cause the GUI to remove all output files
    created by jobs that are either aborted by the user or that
    end in an error. Implements #2614.
  Bug fixes:
  * all programs: macOS: fixed file access if the file name
    (including all path components) contains any Unicode
    character where NFC (Normalization Form Canonical Composed)
    and NFD (Normalization Form Canonical Decomposed) differ,
    e.g. German Umlauts. Fixes #2620.
  * mkvmerge: when splitting by chapters the user can now split
    by chapters coming from one of the appended files, too.
    Fixes #2625.
  * mkvmerge: AAC reader: fixed reading codec parameters
    (channels, sample rate) if a file starts with garbage that
    includes valid-but-bogus AAC headers. Fixes #2622.
  * MKVToolNix GUI: Hebrew was added to the list of often-used
    languages so that it can be selected by default again. Fixes
    #2610.
  * MKVToolNix GUI: when updating the GUI's settings from
    v37.0.0 or older, the GUI checks if the list of often-used
    languages equals the built-in list from v36.0.0. If it does,
    it will be updated to the built-in list changed in v37.0.0.
    Fixes #2611.
  Build system changes:
  * Boost's Operators header library is now required.

-------------------------------------------------------------------
Mon Sep  2 13:02:43 UTC 2019 - Ismail Dönmez <idonmez@suse.com>

- Update to version 37.0.0
  New features and enchancements:
  * MKVToolNix GUI: the list of often used languages now contains those from
    Wikipedia's "List of languages by native speakers" by default. Also by
    default only those languages will be shown in the language drop-down boxes.
  * mkvmerge: mkvmerge now allows appending AV1, VP8, VP9, H.264/AVC and
    H.265/HEVC tracks whose pixel dimensions differ. Implements #2582.
  Bug fixes:
  * MKVToolNix GUI: multiplexer: fixed a bug in the "make destination file names
    unique" logic that caused an existing number-in-parenthesis at the end of
    the file base name to be removed in certain situations (e.g. when the first
    added file was named `m (3).mkv` and both `m (3) (1).mkv` and `m (3)
    (2).mkv` existed already, the GUI was suddenly use `m.mkv` instead of `m (3)
    (3).mkv`).
  * MKVToolNix GUI: on Windows the GUI is built with a slightly older version of
    the Qt library again (5.12.4). The Qt version used in release v36.0.0,
    v5.13.0, lead to crashes when doing certain things such as selecting
    multiple tracks in the multiplexer. Fixes #2605 and #26008.
  * source code: fixed building with Boost 1.71.0. Fixes #2599.
  * all: fixed the spelling of the H.264 & H.265 codec names.
  * mkvmerge: Blu-ray MPLS handling: mkvmerge will now find corresponding M2TS
    files even if the `clip_codec_identifier` playlist item field is not set to
    `M2TS` in the MPLS file. Fixes #2601.
  * mkvmerge: fixed handling of text files that use both DOS-style and
    Unix-style line endings resulting in problems such as text subtitle files
    not being parsed correctly. Fixes #2594.

-------------------------------------------------------------------
Wed Jun 26 13:22:47 UTC 2019 - Luigi Baldoni <aloisio@gmx.com>

- Update to version 35.0.0
  New features and enhancements:
  * mkvmerge: JSON identification: the "codec name" track
    property will be output as `codec_name`. The JSON schema has
    been bumped to v12 for this change.
  * MKVToolNix GUI: job queue: added a new type of action to
    execute after job completion: deleting source files for of
    multiplexer jobs. As this is a destructive operation, the
    action is disabled by default. Implements #869 and #2570.
  Bug fixes:
  * mkvmerge: the "codec name" track property wasn't copied from
    Matroska files. Fixes #2566.
  * MKVToolNix GUI: multiplexer: Windows: clearing the
    destination file name will reset the tab name to
    "\<No destination file\>" again. Fixes #2571.
  * MKVToolNix GUI: multiplexer: the file types were not
    re-translated if the UI language was changed. Fixes #2572.

-------------------------------------------------------------------
Fri Jun  7 09:56:50 UTC 2019 - Ferdinand Thiessen <rpm@fthiessen.de>

- Update to version 34.0.0:
  * mkvmerge: bugfix: all subtitle frames are now treated as key
    frames in order to fix wrong data in source files.
   bugfix: AV1: fixed frame timestamp calculation when reading
    bitstreams that lack timing information from IVF files.
   bugfix: Matroska reader: fixed an infinite loop that could
    happen with large video frames and applied timestamp files
    due to too much data being buffered at the wrong time.

-------------------------------------------------------------------
Tue Apr 16 09:41:48 UTC 2019 - Ferdinand Thiessen <rpm@fthiessen.de>

- Update to version 33.1.0:
  * Build with stack protection
- Update to version 33.0.0:
  * mkvinfo: bugfix: when using the `--size` option, mkvinfo will
   now report the correctly if an element has an unknown size.
  * MKVToolNix GUI: bugfix: info tool: clusters with an unknown
   size will now be read and displayed correctly.
  bugfix: multiplexer: if a destination file names ends with a
   number in parenthesis (e.g. a year such as "(2017)"), that
   number will not be stripped anymore during the process of
   ensuring the destination file name is unique. Only those suffixes
   added automatically in prior attempts to make the file name
   unique will be removed.
- Update to version 32.0.0:
  * mkvinfo: new feature: when sizes are output the size of the
   element's data portion is output in addition to the element's
   total size.
  * MKVToolNix GUI: new feature: info tool: the element's data
   portion is shown as an extra column.
  new feature: multiplexer: added column "Delay" to the track list
   containing the additional delay to apply during multiplexing.
  bugfix: the portable mode wasn't detected correctly when the
   current working directory the GUI was started from wasn't the
   directory the GUI's executable file was located it.
  bugfix: multiplexer: using button to change the current
   destination directory to one of the recently used ones did not
   update the file name according to the "make file name unique"
   setting.
  bugfix: multiplexer: the function "set destination file name from
   selected file's name" will now only change the destination file's
   name but not its path.
  * all: fixed handling of Unicode code points > U+FFFF.
- Update to version 31.0.0:
  * all programs: New Feature: added a new option
   `--abort-on-warnings` that will cause the program to abort after
   it has emitted the first warning, similar to how it aborts after
   the first error.
  * mkvmerge, mkvextract: New Feature: when closing files that were
   opened for writing, cached data will not be flushed to storage
   automatically anymore. A new option was added to both programs
   (`--flush-on-close`) that re-enables flushing for people who are
   affected by data loss.
   The reason is that automatic flushing causes long delays in
   processing queues when the output by mkvmerge/mkvextract isn't
   the final product but just an intermediate result to be
   processed further.
  Bugfix: AVI reader: using DV type 1 AVIs will now result in an
   unsupported file type being reported instead of crashing mkvmerge
  Bugfix: HEVC: the height of interlaced streams will now be set
   correctly to the height of the full frame instead of the height of
   a single interlaced field.
  Bugfix: MP4 reader: edit lists consisting solely of elements that
   mkvmerge doesn't support (such as dwells) are simply ignored.
   Before no data was read for such tracks at all.
  Bugfix: text subtitles: entries with an explicit duration of 0ms
   will now be handled correctly: the 0ms duration will be stored
   in Matroska instead of the difference between the current and
   the following entry.
  * MKVToolNix GUI: New Feature: multiplexer: the dialog previewing
   different character sets for text subtitles will now keep the
   position of the displayed text when switching between character
   sets.
  Bugfix: multiplexer, chapter editor: fixed drag & drop handling
   with Qt 5.12.0 and newer.
  Bugfix: multiplexer: the GUI did not clean up temporary files
   created when running `mkvmerge`.

-------------------------------------------------------------------
Tue Mar 19 10:18:54 UTC 2019 - plater <davejplater@gmail.com>

- Fix Factory build by changing rubygem-rake build requirement to
  rubygem(rake) and adding libboost_system build dependency again,
  fixes boo#1129626

-------------------------------------------------------------------
Mon Jan 14 11:31:04 UTC 2019 - Martin Pluskal <mpluskal@suse.com>

- Drop libboost_system dependency as it is not needed

-------------------------------------------------------------------
Sat Jan 12 17:43:06 UTC 2019 - Ferdinand Thiessen <rpm@fthiessen.de>

- Update to version 30.1.0:
  * MKVToolNix GUI: bugfix: chapter editor: when opening a
   Matroska/WebM file that doesn't contain chapters and later
   saving chapters back to them, the editor was truncating the file
   down to a couple of KB in size.
- Update to version 30.0.0:
  * MKVToolNix GUI: New Feature: multiplexer: a new button was
   added next to the "destination file" controls. Clicking it
   shows a menu with the ten most recently used output
   directories. Selecting one of them will change the destination
   file to the selected directory keeping the file name.
  New Feature: The ten most recently used values for the "relative
   output directory" and "fixed output directory" settings are now
   saved. The corresponding settings have been changed into combo
   boxes allowing quick access to those recent values.
  New Feature: The predefined split sizes and durations can now be
   customized in the preferences.
  New Feature: chapter editor: added an option in the "Chapter
   editor" menu for appending chapters from an existing file to the
   currently open editor tab.
  New Feature: Added an action in the context menu for copying the
   selected entry and all of its children to another open editor tab.
  Bugfix: removing a file added as an "additional part" will no
   longer cause a crash.
  * mkvextract: New Feature: WAV extractor: mkvextract will now
   write W64 files instead of WAV files if the file name extension
   is `.w64` or if the final file size is bigger than 4 GB, the
   file size limit for WAV files.
  * mkvmerge: Bugfix: all files opened for writing will now be
   flushed once before they're closed. This ensures the operating
   system actually writes all cached data to disk preventing data
   loss in certain situations such as power outages or buggy drivers
   in combination with suspending the computer.
  Bugfix: AAC: under certain conditions 8 channel audio files were
   taken for 7 channel ones.
- Update to version 29.0.0:
  * MKVToolNix GUI: New Feature: added an option in the preferences
   for disabling automatic scaling for high DPI displays.
  New Feature: The GUI will now prevent the system from going to
   sleep while the job queue is running.
  * mkvmerge: Bugfix: chapter generation: the start timestamps of
   chapters generated in intervals was wrong for files whose
   smallest video timestamp was bigger than 0.
  Bugfix: MP4 reader: fixed handling of atoms whose size exceeds the
   parent atom's size.
  Bugfix: the chapter name template will now also be used when
   reading Ogg-style chapter files with empty chapter names.
  * mkvextract: Bugfix: AAC: mkvextract will now write the program
   config element (PCE) before the first AAC raw data packet if the
   PCE is present in the `AudioSpecificConfig` structure in the
   `Codec Private` Matroska element. The  PCE carries vital
   information about the number of channels and is required in
   certain cases.
  * mkvpropedit, MKVToolNix GUI's header editor: Bugfix: in
   situations when a one-byte space must be covered by a new EBML
   void element the following element must be moved up instead.
   If that moved element is a cluster, the corresponding cue
   entries will now be updated to reflect the cluster's new
   position.

-------------------------------------------------------------------
Tue Oct 30 14:07:04 UTC 2018 - Ferdinand Thiessen <rpm@fthiessen.de>

- Update to version 28.2.0
  * mkvmerge, mkvinfo, mkvextract, mkvpropedit, MKVToolNix GUI's info
   tool & chapter editor: fixed a case of memory being accessed after
   it had been freed earlier. This can be triggered by specially
   crafted Matroska files and lead to arbitrary code execution. The
   vulnerability was reported as Cisco TALOS 2018-0694 on 2018-10-25
   (CVE-2018-4022). Fixes boo#1113709.
- Update to version 28.1.0
  * mkvmerge: bugfix: AV1 parser: fixed an error in the sequence
   header parser if neither the `reduced_still_picture_header` nor
   the `frame_id_numbers_present_flag` is set.
  bugfix: AV1 parser: when creating the `av1C` structure for the
   Codec Private element the sequence header OBU wasn't copied
   completely: its common data (type field & OBU size among others)
   was missing.
  bugfix: Matroska reader, AV1: mkvmerge will try to re-create the
   `av1C` data stored in Codec Private when reading AV1 from
   Matroska or WebM files created by mkvmerge v28.0.0.
  * MKVToolNix GUI: bugfix info tool: the tool will no longer stop
   scanning elements when an EBML Void element is found after the
   first Cluster element.
- Update to version 28.0.0
  * mkvmerge: New feature: AV1 parser: updated the code for the
   finalized AV1 bitstream specification.
  New feature: AV1 packetizer: updated the code for the finalized
   AV1-in-Matroska & WebM mapping specification.
  New feature: AV1 support: the `--engage enable_av1` option has
   been removed again.
  New feature: MP4 reader: added support for AV1.
  New feature: DTS: implemented dialog normalization gain removal
   for extension substreams.
  New feature: VP9: mkvmerge will now create codec private data
   according to the VP9 codec mapping described in the WebM
   specifications.
  bugfix: JSON identification: fixed a bug when removing invalid
   UTF-8 data from strings before they're output as JSON.
  bugfix: MP4/QuickTime reader: fixed handling of PCM audio with
   FourCC `in24`.
  bugfix: MPEG transport stream reader, teletext subtitles: the
   decision whether or not to keep frames around in order to
   potentially merge them with the following frame is made sooner.
   That avoids problems if there are large gaps between teletext
   subtitle frames which could lead to frames being interleaved
   too late.
  * mkvmerge, mkvextract: New feature: simple text subtitles:
   added a workaround for simple text subtitle tracks that don't
   contain a duration.
  * mkvextract: New feature: added support for extracting AV1 to IVF.
  New feature: IVF extractor (AV1, VP8, VP9): precise values will
   be used for the frame rate numerator & denominator header fields
   for certain well-known values of the track's default duration.
  * MKVToolNix GUI: New feature: automatic scaling for high DPI
   displays is activated if the GUI is compiled with Qt ≥ 5.6.0.
  New feature: added a menu item ("Help" → "System information") for
   displaying information about the system MKVToolNix is running on
   in order to make debugging easier.
  New feature: multiplexer, header editor: the user can enter a list
   of predefined track names in the preferences. She can later select
   from them in "track name" combo box.
  * mkvextract: bugfix: IVF extractor (AV1, VP8, VP8): the frame rate
   header fields weren't clamped to 16 bits properly causing wrong
   frame rates to be written in certain situations.
  * mkvpropedit, MKVToolNix GUI's header editor: bugfix: fixed file
   corruption when a one-byte space must be covered with a new EBML
   void element but all surrounding elements have a "size length"
   field that's eight bytes long already.

-------------------------------------------------------------------
Thu Oct 18 08:08:54 UTC 2018 - Ferdinand Thiessen <rpm@fthiessen.de>

- Update to version 27.0.0:
  * mkvmerge: New feature: chapters: the timestamps of chapters
   read from containers or from chapter files can be adjusted
   (multiplication and addition) with the new
   `--chapter-sync` option or using the special track ID `-2`
   for the existing `--sync` option.
  Bugfix: AC-3: dialog normalization gain removal was corrupting
   E-AC-3 frames irreversibly by writing checksums in places where
   they didn't belong. Additionally only the first E-AC-3 frame in
   a Matroska was processed but not additional dependent frames in
   the same block.
  * MKVToolNix GUI: New feature: multiplexer: adjusted & added
   controls for mkvmerge's new feature of being able to adjust
   chapter timestamps.
  New feature: multiplexer: the GUI can now ask for confirmation
   when the user is about to create a file that won't contain
   audio tracks. It does this by default if at least one source
   file contains an audio track.
  Bugfix: fixed a leak of Windows font resources leading to a
   general slowdown and subsequent crash.
- Update to version 26.0.0:
  * mkvmerge: New feature: chapter generation: if the name template
   given by `--generate-chapters-name-template` is empty, no names
   will be generated for the chapter atoms.
  New feature: chapters: chapter names generated from MPLS files
   will now use the name template if one is set via
   `--generate-chapters-name-template`.
  New feature: mkvmerge will no longer abort with an error message
   if no audio, video and subtitle tracks should be multiplexed.
   This allows copying of chapters from non-chapter source files.
  Bugfix: Matroska reader: fixed wrong timestamps when appending
   Matroska files where the second Matroska file's first timestamp
   is bigger than 0.
  Bugfix: MP4 reader: fixed division by zero errors during file
   identification if the timescale is 0 in the `MVHD` atom.
  Bugfix: Windows Television DVR files are now recognized as an
   unsupported file type. This prevents mis-detection as MPEG-2
   with an accompanying flood of error messages.
  * MKVToolNix GUI: New feature: the font size in the tool
   selector on the left will scale with the font size the
   user selects in the preferences.
  New feature: the GUI will no longer automatically resize the
   columns in tree and list views to match the content size.
   Instead it remembers and restores the widths set by the user.
  New feature: multiplexer: the chapter name template will now be
   set automatically to the name template in the preferences'
   "chapter editor" section. Additionally the option
   `--generate-chapters-name-template …` will be passed to
   mkvmerge in situations when mkvmerge will generate chapters.
  New feature: chapter editor: if the chapter name template is empty,
   chapters will be generated without names.
  New feature: chapter editor: added an option to remove all chapter
   names to the "additional modifications" dialog.
  Bugfix: info tool: under certain circumstances "cues" were shown at
   the wrong level (inside the previous master element instead of on
   lvel 1).
  Bugfix: job queue: fixed invalid memory handling and consequent
   crashes when using the "edit in corresponding tool & remove from
   job queue" option if one of the files in that job contained
   attached files.

-------------------------------------------------------------------
Wed Aug  8 22:52:50 UTC 2018 - rpm@fthiessen.de

- Update to 25.0.0:
  * mkvextract: New feature: VobSub extraction: empty SPU packets
    will now be dropped during extraction as other tools such as
    MP4Box cannot handle them correctly.
   Bugfix: fixed a crash when mkvextract with a non-Matroska file as
    the source file.
  * MKVToolNix GUI: New feature:: multiplexer: added options to only
    enable tracks of certain types by default.
   New feature: multiplexer: added an option to enable dialog
    normalization gain removal by default for all audio tracks for
    which the operation is supported.
   New feature: multiplexer: when deriving track languages from the
    file names is active and the file name contains the usual
    season/episode pattern, then only the part after the
    season/episode pattern will be used for detecting the language.
   New feature: multiplexer: the regular expression used for deriving
    track languages from the file names can now be customized in
    the preferences.
   New feature: multiplexer: the user can now customize the list of
    track languages the GUI recognizes in file names. This list
    defaults to a handful of common languages instead of the full
    list of supported languages.
   Bugfix: multiplexer: when scanning playlists, all playlists were
    offered for selection regardless of the value of the "minimum
    playlist duration" setting.
   Bugfix: multiplexer: deriving track languages from file names:
    the regular sub-expressions for ISO 639-1 codes could match
    on empty strings, too, causing matches in wrong places and hence
    no language being recognized in certain situations.
   Bugfix: header editor: fixed a crash when saving the file fails
    (e.g. because it isn't writable).
   Bugfix: header editor: the editor was wrongfully claiming that
    mandatory elements with default values cannot be removed in
    the "status" text.
   Bugfix: preferences: on macOS & Linux the setting "enable copying
    tracks by their type" wasn't restored on program start.
   Bugfix: the central area is now scrollable, allowing the GUI to be
    resized to almost arbitrary sizes.
   Bugfix: multiplexer: the "copy file title to destination file name"
    functionality will now replace everything in the destination file
    name up to the last period instead of only up to the first period.
  * mkvmerge: New feature: SRT/ASS/SSA text subtitles: for files for
    which no encoding has been specified, mkvmerge will try UTF-8
    first before falling back to the system's default encoding.
   New feature: SRT/ASS/SSA/WebVTT text subtitles: a warning is now
    emitted if invalid 8-bit characters are encountered outside valid
    multi-byte UTF-8 sequences.
   New Feature: Matroska & MPEG transport stream readers: the encoding
    of text subtitles read from Matroska files can now be changed
    with the '--sub-charset' parameter.
   New feature: MP4 reader: improved the detection of edit lists
    consisting of two identical entries, each spanning the file's
    duration as given in the movie header atom. The second entry is
    ignored in such cases.
   New feature: JSON identification: the "display unit" video track
    property is now reported as `display_unit`. The JSON schema has
    been bumped to v11 for this change.
   New feature: AVC/h.264: empty NALUs will now be removed.
   New feature: input: format detection uses file-extension to improve
    performance and to give preference when several formats match.
   New feature: AV1: added support for reading AV1 video from
    Open Bitstream Unit files.
   New feature: AV1: adjusted the code for the AV1 bitstream format
    changes made up to 2018-05-02 (git revision d14e878).
   New feature: MP4 reader: if a track has an edit list with two
    identical entries, each spanning the file's duration as given in
    the movie header atom, then the second entry will now be ignored.
    Improves the handling of files with bogus data.
   Bugfix: AVC/h.264 and HEVC: fixed file identification failing
    for certain elementary streams due to internal buffers not
    being cleared properly.
   Bugfix: MLP code: fixed various issues preventing MLP from being
    parsed correctly.
   Bugfix: TrueHD/MLP packetizer; dialog volume normalization removal
    isn't attempted if the track is an MLP track as the operation is
    only supported for TrueHD, not MLP.
   Bugfix: MPEG TS reader: when reading MPLS mkvmerge will now
    compare the MPLS's start and end timestamps against the transport
    stream's PTS instead of its DTS. Otherwise the first key frame of
    a video track might be dropped if it isn't the first in
    presentation order.
   Bugfix: JSON identification: mkvmerge will ensure that all strings
    passed to the JSON output modules are valid UTF-8 encoded strings
    by replacing invalid bytes with placeholder characters. This avoids
    the JSON library throwing an exception and mkvmerge
    aborting on such data.
   Bugfix: audio packetizers: mkvmerge will now keep discard
    padding values if they're present for packets read
    from Matroska files.
   Bugfix:  Ogg Opus reader: packet timestamps aren't calculated by
    summing up the duration of all packets starting with
    timestamp 0 anymore. Instead the algorithm is based on the Ogg page's
    granule position and which packet number is currently timestamped
    (special handling for the first and last packets in the stream).
   Bugfix: E-AC-3 parser: fixed determining the number of channels for
    streams that contain an AC-3 core with dependent E-AC-3 frames.
   Bugfix:  Matroska reader: fixed mkvmerge buffering the whole file if a
    video track is multiplexed that consists of only one or a few frames.
   Bugfix: the "display unit" video track property will now be kept if
    it is set in the source file.
   Bugfix:  MP3 packetizer: removed a memory leak growing linearly with the
    track's size.
   Bugfix: VobSub packetizer: whenever a VobSub packet doesn't contain a
    duration on the container level, mkvmerge will now set it from
    the duration in the SPU packets. Before it was accidentally setting
    the SPU-level duration to 0 instead.
   Bugfix:  track statistics tags: if writing the `Date` element is
    deactivated via `--no-date`, the `_STATISTICS_WRITING_DATE_UTC`
    isn't written either anymore.
   Bugfix: removed several small, constant-size memory leaks.

-------------------------------------------------------------------
Mon Apr  9 07:58:38 UTC 2018 - rpm@fthiessen.de
- Update to 22.0.0:
  * mkvmerge: New feature: AC-3, DTS, TrueHD: added an option for
    removing/minimizing the dialog normalization gain for all
    supported types of the mentioned codecs.
   New feature: AV1: added support for reading AV1 video from IVF,
    WebM and Matroska files.
   New feature: FLAC: mkvmerge can now ignore ID3 tags in FLAC
    files which would otherwise prevent mkvmerge from detecting the
    file type.
   Bugfix: MP4 reader: fixed reading the ESDS audio header atom if
    it is located inside a "wave" atom inside the "stsd" atom.
   Bugfix: MP4 reader: AAC audio tracks signalling eight channels
    in the track headers but only seven in the codec-specific
    configuration will be treated as having eight channels.
   Bugfix: MPEG TS reader: fixed wrong handling of the continuity
    counter for TS packets that signal that TS payload is present
    but where the adaptation field spans the whole TS packet.
   Bugfix: the 'document type version' and 'document type read version'
    header fields are now set depending on which elements are
    actually written, not on which features are active.
   Bugfix: the 'document type version' header field is now set
    to 4 correctly if any of the version 4 Matroska elements
    is written.
  * mkvinfo: New Feature: the size and positions of frames
    within "SimpleBlock" and "BlockGroup" elements are now shown
    the same way they're  shown for other elements.
   Bugfix: summary mode: the file positions reported for frames in
    `BlockGroup` elements did not take the bytes used for
    information such as timestamp, track number flags or lace sizes
    into account. They were therefore too low.
  * mkvpropedit, MKVToolNix GUI header editor: the
    'document type version' and 'document type read version' header
    fields are now updated if elements written by the changes require
    higher version numbers.
   Bugfix: mandatory elements can now be deleted if there's a default
    value for them in the specifications.
  * MKVToolNix GUI: multiplexer: added options for deriving the
    track languages from the file name by searching for
    ISO 639-1/639-2 language codes or language names enclosed in
    non-word, non-space characters.
   Bugfix: info tool: implemented reading all elements in the file
    after the first cluster. Only top-level elements are shown;
    child elements are only loaded on demand.
   Bugfix: info tool: added a context menu with the option to show a
    hex dump of the element with the bytes making up the EBML ID and
    the size portion highlighted in different colors.
    In-depth highlighting is done for the data in `SimpleBlock`
    and `Block` elements.
   Bugfix: chapter editor: added an option to remove all end
    timestamps to the "additional modifications" dialog.
- Update to 21.0.0:
  * mkvinfo: the GUI portion has been removed. mkvinfo is now a pure
     command-line program again.
  * mkvmerge: New feature: track statistics tags: the `TagDefault`
    element will not be written anymore as it was always set to the
    default value `1` anyway.
   New feature: JSON files can now contain C++-style line comments
    outside of strings. Such comments, even though not part of the
    official JSON specifications, are now ignored when reading JSON
    files.
   Bugfix: Appending files with additional parts at the same time
    was broken if more than one additional part was appended.
   Bugfix: FLV reader: a single invalid AAC frame was written for
    AAC audio tracks with codec initialization data longer than five
    bytes.
   Bugfix: FLV reader: timestamps will be normalized down to 0.
   Bugfix: MP4 reader: if an AAC track doesn't contain an
    AAC-specific decoder configuration in the ESDS portion,
    then a default decoder configuration will be generated based on
    the track's header data instead of skipping the track.
   Bugfix: MP4 reader: fixed reading HEVC/h.265 video tracks if
    they're stored as Annex B byte streams inside MP4.
   Bugfix: Ogg Opus reader: mkvmerge will now emit a warning
    instead of aborting when it encounters an Ogg Opus page with
    no data in the packet.
   Bugfix: Matroska parser: fixed a segmentation fault that
    occurred whenever the first level 1 element after resyncing
    after an error in the file structure isn't a cluster.
   Bugfix: fixed a crash during file type detection for
    attachments if MKVToolNix is installed in a path with
    non-ASCII characters (e.g. German Umlauts).
  * MKVToolNix GUI: New Feature: chapter editor: opening a
    Matroska file without chapters in it will now open the file
    in an empty chapter editor instead of showing an error message.
   New Feature: an "info" tool has been added, replacing the
    functionality of mkvinfo's GUI. The functionality is not on
    par yet but will be for release v22.
   Bugfix: MKVToolNix GUI: Bugfix: multiplexer: the subtitle
    character set can now be set for appended subtitle files, too.
   Bugfix: MKVToolNix GUI: multiplexer: when appending, all tracks
    appended to disabled tracks will start out disabled, too.
  * mkvinfo: the `--hex-positions` parameter did nothing in summary mode.
   Bugfix: mkvinfo: Windows: line endings will be written as `\r\n`
    again instead of just `\n`.
  * mkvpropedit: Bugfix: adding track statistics tags: for tracks
    with content encoding (compression) mkvpropedit is now
    accounting the uncompressed number of bytes, not the encoded
    (compressed) number of bytes.

-------------------------------------------------------------------
Sun Jan 21 23:21:58 UTC 2018 - rpm@fthiessen.de

- Update to 20.0.0:
  * Feature removal: several deprecated features have been removed:
   mkvmerge: the deprecated options `--identify-verbose`,
    `--identify-for-gui`, `--identify-for-mmg` and
    `--identification-format verbose-text`
   all command line tools: support for the deprecated, old,
    proprietary format used for option files
   all command line tools: support for passing command line
    options via the deprecated environment variables
    `MKVTOOLNIX_OPTIONS`, `MKVEXTRACT_OPTIONS`, `MKVINFO_OPTIONS`,
    `MKVMERGE_OPTIONS` and `MKVPROPEDIT_OPTIONS`
  * mkvmerge: AVC/h.264 packetizer (framed): access unit delimiter
    NALUs will now be removed.
   bugfix: AVC/h.264 parser: when fixing the bitstream timing
    information mkvmerge will now use exact representations of
    the desired field duration if possible.
   bugfix: AVC/h.264 parser: mkvmerge no longer assumes that
    encountering sequence parameter set or picture parameter set
    NALUs signal the start of a new frame.
   bugfix: AVC/h.264 packetizer (framed): when mkvmerge is told
    to fix the bitstream timing information, it will now update
    all SPS NALUs, not just the ones in the AVCC.
   bugfix: MPEG TS reader: TS packet payloads will only be
    treated as PES packets if the payload actually starts with
    a PES start code. The prior behavior led to wrong timestamps
    and potentially broken frame data.
   bugfix: MPEG TS reader: mkvmerge will now drop incomplete PES
    packets as soon as an error is detected in the transport
    stream instead of passing the incomplete frame to the
    packetizer. An error is assumed either if the
    `transport_error_indicator` flag is set or if the value of
    the `continuity_counter` header field doesn't match the
    expected value.
   bugfix: Opus: when re-muxing Opus from Matroska mkvmerge will
    now write "block duration" elements for all block groups
    where a "discard padding" is set, too.
   bugfix: SRT reader: mkvmerge can now handle SRT files with
    timestamps without decimal places.
   bugfix: read buffer I/O class: the class could get out of sync
    regarding the file position of the underlying file I/O class
    causing wrong data to be returned on subsequent read
    operations. One result was that trying to identifying MPLS
    files that refer to very short M2TS files caused mkvmerge
    to segfault.
   bugfix: multiplexer core: if there's a gap in audio timestamps,
    a new block group/lace will be started for the first frame
    after each gap. Before the fix the frame after the gap was
    often stored in the previous block group causing the gap to
    be in the wrong place: at the end of that block group.
  * mkvextract: bugfix: AVC/h.264: if two consecutive IDR frames
    with the same `idr_pic_id` parameter and no access unit
    delimiters are found between them, mkvextract will insert an
    access unit delimiter in order to signal the start of a new
    access unit.
  * MKVToolNix GUI: bugfix: update check dialog: Markdown links will
    now be converted to clickable links.

-------------------------------------------------------------------
Mon Dec 25 18:43:33 UTC 2017 - jengelh@inai.de

- Update to new upstream release 19.0.0
  * mkvmerge: splitting by duration, by timestamps or by
    timestamp-based parts: mkvmerge will now consider the first
    key frame within 1ms of the requested value to be eligible
    for splitting.
  * mkvmerge: fixed reading text files encoded in UTF-16 order
    UTF-32 that have different forms of line endings (new lines,
    carriage returns or a mix of both).
  * MKVToolNix GUI: multiplexer: once a "subtitle/chapter
    character set" was set for a track it couldn't be changed
    back to the empty entry (= auto-detection) anymore.

-------------------------------------------------------------------
Tue Dec 12 15:11:02 UTC 2017 - rpm@fthiessen.de

-Update to 18.0.0:
  * mkvmerge: bugfix: AAC ADTS parser: fixed interpretation of the
    `channel_configuration` header element for ADTS files that do
    not contain a program configuration element: value 7 means
    7.1 channels.
   bugfix: Matroska identification: the `date_local` and
    `date_utc` attributes will only be output if the identified
    Matroska file actually contains the "date" header field.
   bugfix: WebVTT: mkvmerge did not recognize timestamp lines if
    the hours components were absent.
   enhancement: AVC & HEVC ES parsers: performance improvements
    by copying much less memory around.
   enhancement: tags: reintroduced a workaround for non-compliant
    files with tags that do not contain the mandatory `SimpleTag`
    element. This workaround was removed during code refactoring
    in release v15.0.0.
  * mkvpropedit: bugfix: GUI's header editor: the `date` header
    field won't be added automatically anymore whenever the
    segment info section is edited and the `date` element is
    either deleted or not present in the first place.
  * GUI: multiplexer: the "AAC is SBR/HE-AAC/AAC+" checkbox in
    the "audio properties" section will be disabled if the
    functionality is not implemented for the selected track's
    codec & container.
   enhancement: multiplexer: the "reduce to core" checkbox in
    the "audio properties" section will be disabled if the
    functionality is not implemented for the selected track's
    codec.

-------------------------------------------------------------------
Wed Nov  8 13:50:41 UTC 2017 - rpm@fthiessen.de

- Update to 17.0.0:
  * The word "timecode" has been changed to "timestamp" everywhere.
   This affects program output (including mkvinfo's), GUI controls,
   command line parameters (e.g. `mkvmerge --timestamp-scale …`) and
   file formats.
   All programs remain backwards compatible insofar as they still
   accept "timecode" in all those places.
  * mkvextract's command line interface has been changed to allow
   extraction of multiple items at the same time.
  * mkvmerge: New feature: AC-3: during identification regular AC-3
    and E-AC-3 tracks will now be identified differently for most
    container formats (exception: AVI, Real Media, Ogg/OGM).
    The codec will be reported as `AC-3` for regular AC-3 and as
    `E-AC-3` for E-AC-3 tracks instead of the combined `AC-3/E-AC-3`.
   bugfix: AAC ADTS parser: mkvmerge will now parse the
    `program_config_element` if it is located at the start of an AAC
    frame in order to determine the actual number of channels.
    This overrides invalid channel configurations in the ADTS headers.
   bugfix: fixed AC-3 being misdetected as encrypted MPEG program
    streams under certain conditions.
   bugfix: Dirac: under certain conditions (e.g. only muxing a single
    Dirac track without any other tracks) mkvmerge was always setting
    the pixel width & height to 123. The frame rate was wrong, too.
   bugfix: E-AC-3 in Matroska: if AC-3 cores and their corresponding
    E-AC-3 extension are located in two different Matroska blocks,
    then mkvmerge will now re-assemble them into a single block and
    only use the first block's timestamp.
   bugfix: SRT reader: fixed calculating the duration of entries
    starting with at a negative timestamp.
   bugfix: VC-1: under certain conditions (e.g. only muxing a single
    VC-1 track without any other tracks) mkvmerge was always setting
    the pixel width & height to 123. The frame rate was wrong, too.
   bugfix: command line options: an error message will be output if
    the single-value-form of the `--sync` option is used and it
    isn't a number (e.g. `--sync 0:asd`).
  * mkvpropedit, GUI's header editor: bugfix: both programs will now
    show proper error messages instead of crashing when certain
    kinds of data corruption is found when reading a file.
- Update to 16.0.0:
  * mkvmerge: New feature MP4 reader: added support for Vorbis.
   bugfix: AAC reader: mkvmerge will now emit an error message for
    AAC files whose header fields imply a sampling frequency
    or number of channels of 0.
   bugfix: AVC/h.264 ES parser: fixed the calculation of reference
    information for P and B frames. This also fixes some P frames
    being marked as B frames and vice versa.
   bugfix: AVC/h.264 ES parser: only non-key frames that have the
    NALU header field `nal_ref_idc` set to 0 will be marked as
    "discardable" in `SimpleBlock` elements. Other half of the
    fix for #2047.
   bugfix: HEVC/h.265: the generation of the HEVCC structure
    stored in `CodecPrivate` was wrong in two places:
    1. the position of the number of sub-layers was swapped with
    reserved bits and 2. the VPS/SPS/PPS/SEI lists did not start
    with a reserved 1 bit.
   bugfix: output: the `doc type version` will be set at least
    to 2 if certain elements are written (`CodecState`,
    `CueCodecState`, `FlagInterlaced`).
   bugfix: output: the track header attributes `MinCache` and
    `MaxCache` will not be written anymore.
   bugfix: Matroska reader: the "key" and "discardable" flags of
    SimpleBlock elements will be kept as they are.
   bugfix: Matroska reader: if present in the file,
    the "white colour coordinate x" track header attribute was
    written to both "white colour coordinate x" and
    "white colour coordinate y" in the output file.
   bugfix: Opus output: mkvmerge will now put all frames with
    discard padding into their own block group.
  * MKVToolNix GUI: Bugfix: header editor: removed the check for
    external modification when saving the file.
   bugfix: job queue: fixed calculation of total progress when
    automatic removal of completed is enabled.

-------------------------------------------------------------------
Thu Aug 31 19:10:10 UTC 2017 - rpm@fthiessen.de

- Update to 15.0.0:
  * Requires libebml >= 1.3.5
  * Dropped disable-update-check.patch (upstream now provides
    configure option for disabling the update check).
  * mkvmerge, mkvpropedit, GUI's header and chapter editors: the
    programs will no longer add most missing Matroska elements that
    are mandatory but have a default value in the Matroska
    specification (e.g. the `TagLanguage` element with a value of
    `und` if it isn't present in its `SimpleTag` parent).
  * mkvmerge: the option `--colour-matrix` has been renamed to
    `--colour-matrix-coefficients` in order to match the
    specification more closely. The old option name will
    continue to be recognized as well.
  * all: bugfix: selecting the program's language (e.g. via the
    `--ui-language`command-line option or via the GUI's
    preferences) did not work on Linux & Unix if the `LANGUAGE`
    environment variable was set and didn't include the desired
    language. 
  * MKVToolNix GUI: new feature: multiplex tool: added a new entry
    to the "source files" context menu labeled "Set destination
    file name from selected file's name". It will force the GUI
    to consider the selected file to be the reference for
    automatically setting the file name, no matter which file was
    originally added as the first file. It will also force setting
    the destination file name once if automatic destination file
    name generation is turned off in the preferences.
   new feature: multiplex tool: added an option in the preferences
    on "Multiplexer" → "Output" labeled "Only use the first source
    file that contains a video track". If enabled, only source
    files containing video tracks will be used for setting the
    destination file name. Other files that are added are ignore.
   new feature: header editor: added support for editing the video
    colour attributes.
   new feature: header editor: added support for the "video
    projection" track header attributes.
   new feature: job queue: selected jobs can now be move up and
    down by pressing the `Ctrl+Up` and `Ctrl+Down` keys.
    Additionally, push buttons to move them up & down are shown
    if the corresponding option is enabled in the preferences.
   bugfix: removed the keyboard shortcuts for switching between
    the different tools (e.g. `Ctrl+Alt+1` for the multiplexer).
    They overlapped with basic functionality on keyboards that
    use an `AltGr` key, e.g. German ones, where `AltGr+7` emits
    `{`. As `AltGr+key` is implemented as `Ctrl+Alt+key` under the
    hood, this means that `AltGr+7` is really `Ctrl+Alt+7` which
    the GUI now took to mean "switch to the job queue" instead of
    "insert `{`".
   bugfix: header editor: after saving the file the GUI wasn't
    updating its internal file modification timestamp. That lead
    to the GUI wrongfully claiming that the file had been
    modified externally when the user wanted to save the file
    once more, requiring a reload of the file losing all
    modifications made since saving the first time.
  * mkvmerge: new feature: added support for the
    "video projection" track header attributes.
   bugfix: DTS handling: some source files provide timestamps for
    audio tracks only once every `n` audio frames.
    In such situations mkvmerge was buffering too much data
    resulting in a single gap in the timestamps of one frame
    duration after frame number `n - 1` (the second audio
    timestamp read from the source file was used one output
    frame too early).
  * mkvinfo: new feature: added support for the
    "video projection" track header attributes.
   bugfix: fixed a null pointer dereference if an `EbmlBinary`
    element's data pointer is a null pointer.
  * mkvpropedit: new feature: added support for editing the
    video colour attributes.
   new feature: added support for the "video projection"
    track header attributes.

-------------------------------------------------------------------
Fri Aug 25 10:17:55 UTC 2017 - rpm@fthiessen.de

- Split boost-devel BuildRequires for Tumbleweed
- Update to version 14.0.0
  * mkvmerge, mkvpropedit, MKVToolNix GUI (chapter editor):
   new feature: added support for chapters in WebM files that is
    spec-compliant by removing all tag elements not supported
    by the WebM spec.
  * translations: added a Romanian translation of the programs.
  * mkvmerge: bugfix: AVC/h.264 and HEVC/h.265 parser: fixed wrong
    frame order & timestamp calculation in certain situations when
    SPS (sequence parameter sets) or PPS (picture parameter sets)
    change mid-stream.
   bugfix: MPEG-1/-2 video: the "remove stuffing bytes" feature
    introduced in v5.8.0 was broken. In a lot of situations it
    did not detect the end of a slice correctly and removed 0 bytes
    that were actually part of the slice structure. Often there
    were no visual problems as decoders were able to ignore such
    errors, but in other cases there are visual artifacts upon
    decoding. As detecting the slice end properly requires parsing
    the whole slice structure, this feature has been removed again.
   bugfix: MPEG PS reader: fixed mkvmerge trying to handle an "end"
    code the same way as a "program stream map" code.
   bugfix: MPEG TS reader: mkvmerge won't emit warnings if the
    system's `iconv` library doesn't support the ISO 6937
    character set.
   bugfix: when appending fails the error message details (e.g.
    "the number of channels differs: 1 and 2") were often not output.
   new feature: AAC: implemented support for AAC with 960 samples per
    frame.
   new feature: identification: if the encoding/character set of a
    text subtitle track is known (e.g. because a byte order mark is
    present in the file), then it will be output during
    identification as the `encoding` property.
   new feature: WAV reader: added support for Wave64 files.
  * MKVToolNix GUI: bugfix: multiplex tool: implemented a workaround
    for a crash that could occur during drag & drop if at least one
    of the columns is hidden.
   bugifx: multiplex tool: appended tracks can no longer be enabled
    (selected for multiplexing) if the track they're going to be
    appended to is not enabled.
   bugifx: multiplex tool: if the GUI is set to ensure unique output
    file names, it will now verify that right before starting to
    multiplex/adding the job to the queue, too.
   bugifx: fixed the total progress reverting to 0% instead of
    staying at 100% when all jobs have finished. This was introduced
    by the attempt at fixing the computation of the value of total
    progress bar for multiple jobs running.
   new feature: multiplexer: if the encoding/character set of a
    subtitle track cannot be changed, the GUI will deactivate the
    "subtitle character set" drop-down box and ignore changes to it
    when multiple tracks are selected. Additionally, if the track's
    encoding is known and cannot be changed (e.g. due to a
    byte order mark in the file), that encoding will be selected in
    the drop-down box automatically. Both changes signal to the user
    that she doesn't have to take care of the encoding herself.
   new feature: chapter editor: added a function to the "additional
    modifications" dialog for calculating and setting the end
    timestamps.
   new feature: changed the shortcuts for switching between the
    various tools from `Alt+number` (e.g. `Alt+1` for the multiplexer
    tool) to `Ctrl+Alt+number` in order to avoid clashing with
    Windows' input method for arbitrary characters (pressing and
    holding `Alt` and typing the codepoint on the number pad).
   new feature: added a "Window" menu and entries with shortcuts for
    selecting the next (`Ctrl+F6`) respectively previous tab
    (`Ctrl+Shift+F6`) in the current tool.

-------------------------------------------------------------------
Thu Jul 13 14:48:50 UTC 2017 - rpm@fthiessen.de

- Update to version 13.0.0
  * mkvmerge: new feature: MPEG TS reader: information about
    multiple programs will be output as container properties during
    verbose/JSON identification.
   bugfix: MP4 reader: MPEG-1/2 video read from MP4 files was written
    with an invalid codec ID (e.g. `V_MPEG7`) in certain cases.
   bugfix: MPEG PS reader: made the file type detection less strict
    so that garbage at the start of the file doesn't prevent detection.
   bugfix: MPEG PS reader: (E-)AC-3 tracks were not detected if the very
    first packet for that track didn't contain a full (E-)AC-3 frame.
   bugfix: MPEG TS reader: fixed mkvmerge not detecting all tracks in
    MPEG transport streams containing multiple programs.
   bugfix: MPEG TS reader: fixed track content being broken for some
    tracks read from MPEG transport streams containing multiple programs.
   bugfix: JSON identification: the `stream_id` and `sub_stream_id`
    track properties were output as hexadecimal strings instead
    of unsigned integers. As the `ts_pid` track property was only
    used for MPEG transport streams, its value is now output as
    `stream_id` instead, and the `ts_pid` property has been removed.
    The JSON schema version has been bumped to 8 due to this change.
   bugfix: fixed a crash when appending video tracks where one track
    has a CodecPrivate member and the other one doesn't.
   bugfix: track statistics tags: the `NUMBER_OF_BYTES` tag
    is supposed to contain the number of bytes in a track before any
    of the content encoding schemes such as lossless compression
    is applied; however, mkvmerge was wrongfully using the number of
    bytes after the schemes had been applied.
   bugfix: CLPI & MPLS parsers: MPLS and CLPI files with version
    number `0300` as used on Ultra HD Blu-ray Discs are
    now accepted as well.
  * MKVToolNix GUI: new feature: multiplex tool: added a column
    "program" to the tracks list. Certain container types such
    as MPEG transport streams can contain multiple programs.
    The new column will contain the service name (think TV station
    names such as "arte HD") for such streams.
   bugfix: fixed computation of value of total progress bar for
    multiple jobs running.
   bugfix: multiplexer, adding new attachments: when the GUI checks
    if there's an attachment with the same name it will now
    disregard disabled attached files.
   new feature: multiplex tool: the dialog asking the user what to
    do with dropped files (add to current settings, add to new
    settings etc.) now remembers the previous decision and defaults
    to it the next time it's shown.
   new feature: tabs can now be closed by pressing the middle mouse
    button.
  * mkvpropedit: bugfix: fixed a crash when the selector used
    for `--tags` is invalid.

-------------------------------------------------------------------
Tue Jun  6 17:34:10 UTC 2017 - olaf@aepfle.de

- Adjust usage of gccN-c++ for Leap42 and SLE12

-------------------------------------------------------------------
Tue May 30 14:10:55 UTC 2017 - rpm@fthiessen.de

- Update to version 12.0.0
  * MKVToolNix GUI: new feature: the key combination
    Ctrl+Shift+Space will now toggle the selection of the current
    item in all tree views where multiple selections are allowed.
   new feature: chapter editor: added the extension `*.cue`
    to the "open chapter file" dialog.
   bugfix:preferences → job actions, type "play audio file":
    the GUI will no longer clear the audio file name input if the
    user aborts the audio file selection dialog.
   bugfix: multiplexer tool: the "show command line" dialog will no
    longer include the mkvmerge executable's location as the first
    argument for the two "MKVToolNix option files" escape modes.
   bugfix: header editor: empty track language elements are now
    treated the same as those set to invalid ISO 639-2 codes:
    as if they were set to `und` = "undetermined".
   new feature: watch jobs: the user can now have the GUI execute
    an action once as soon as the current job or the whole queue
    finishes. The actions are the same ones that can be configured
    to be run automatically after job or queue completion.
   new feature: implemented several built-in actions that can be
    executed either on special events or once via the "watch jobs"
    tool. These are: playing an audio file; hibernating, sleeping
    and shutting down the computer.
   new feature: multiplex tool: added a new option for what to do
    after starting to multiplex/adding to the job queue:
    "close current settings" will close the current multiplex
    settings without opening new ones.
  * mkvmerge: New feature: cue sheet parser: if the cue sheet
    contains a non-empty `TITLE` entry and if no other segment title
    has been set yet, then the segment title will be set to the
    cue sheet's `TITLE` value.
   new feature: added an option `--no-date` that prevents the "date"
    field from being written to the segment information headers.
   new feature: FLAC reader: added support for handling embedded
    pictures as attachments.
   new feature: MP4 reader: Added support for parsing the "COLR"
    atom and including its values as track headers.
   bugfix: HEVC/h.265 parser: fixed the superfluous copying of the
    'bitstream_restriction_flag' and its dependent flags in the
    VUI parameters of the sequence parameter sets if the timing
    information is present, too.
   bugfix: MPEG TS reader, AAC parser: the MPEG TS reader will now
    force the AAC parser to use the multiplex mode that the MPEG TS
    reader has detected. This prevents the AAC packetizer from
    mis-detecting it in its own attempt to identify the mode.
   bugfix: MPEG TS reader: valid MPEG transport streams that start
    with an h.264/h.265 start code were not recognized as a
    supported file type.
   bugfix: MPEG TS reader: fixed a potential read access from
    invalid memory addresses in the code parsing the program
    map table (PMT).
   bugfix: MPEG TS reader: if packets are encountered that belong
    to a PID not listed in the program map table (PMT), mkvmerge
    will attempt to determine their type and codec from the content.
    This supported content types are AAC (ADTS only) and AC-3.
   bugfix: MP4 reader: fixed finding and parsing the `colr` atom if
    there are more than one video extension atoms and the `colr` atom
    is not the first one.
   bugfix: MP4 reader: the `nclx` colour type of the `colr` atom is
    now recognized, too.
   bugfix: AAC parser: fixed mis-detection of certain data as valid
    ADTS AAC headers resulting in memory allocation failures.
   bugfix: AVC/h.264 parser: mkvmerge will now ignore bogus timing
    information in the sequence parameter sets.
   bugfix: AVC/h.264 & HEVC/h.265 parsers: all trailing zero bytes
    will now be removed from NALUs.
   bugfix: HEVC/h.265 parser: fixed copying the
    `bitstream_restriction_flag` and all dependent fields in the VUI
    parameters of the sequence parameter sets.
   bugfix: HEVC/h.265 parser: fixed the calculation of the number of
    parameter set arrays in the HEVCC data structure stored in
    CodecPrivate.
  * mkvpropedit: bugfix: header editor: added support for editing the
    "date" segment information field.

-------------------------------------------------------------------
Tue Mar 28 21:07:32 UTC 2017 - rpm@fthiessen.de

- Update to new release 10.0.0
  * mkvmerge: new feature AVC/h.264 and HEVC/h.265 parser: mkvmerge
    will now drop all frames before the first key frame as they
    cannot be decoded properly anyway.
   new feature HEVC/h.265 parser: added a workaround for invalid
    values for the "default display window" in the VUI parameters
    of sequence parameter sets.
   bugfix MP4 reader: fixed track offsets being wrong in certain
    situations regarding the presence or absence of edit lists
    ('elst' atoms) & composition timestamps ('ctts' atoms).
   bugfix MP4 reader: offsets in "ctts" are now always treated
    as signed integers, even with version 0 atoms.
   bugfix Matroska reader: fixed handling BlockGroups and
    SimpleBlocks with negative timestamps.
   bugfix MP3 packetizer: the MP3 packetizer will no longer drop
    timestamps from source containers if they go backwards.
    This keeps A/V in sync for files where the source was in sync
    even though their timestamps aren't monotonic increasing.
   bugfix AVC/h.264 parser: mkvmerge will now drop timestamps
    from the source container if no frame is emitted for that
    timestamp.
   bugfix HEVC/h.265 parser: mkvmerge will now drop timestamps
    from the source container if no frame is emitted for that
    timestamp.
  * mkvinfo: the timestamps of SimpleBlocks with negative
   timestamps are now shown correctly.
  * mkvextract: SSA/ASS: fixed extraction when the "Format"
   line in the "[Events]" section contains less fields than the
   default for SSA/ASS would indicate.

-------------------------------------------------------------------
Mon Feb 20 14:43:20 UTC 2017 - rpm@fthiessen.de

- Update to new release 9.9.0
  * mkvmerge: AC-3 handling: some source files provide timestamps
    for audio tracks only once every n audio frames. In such
    situations mkvmerge was buffering too much data resulting in
    a single gap in the timestamps of one frame duration after frame
    number n - 1 (the second audio timestamp read from the source
    file was used one output frame too early).
   bugfix MP4 reader: mkvmerge was only reading a small part of MP4
    DASH files where the first "moov" "mdat" atoms occur before the
    first "moof" atom.
   bugfix MP4 reader: edit list ("edts" atoms) that are part of the
    "moof" atoms used in MP4 DASH files weren't parsed. Instead the
    edit lists from the main track headers inside the "moov" atom
    were used.
   bugfix MP4 reader: when an MP4 DASH file contained both normal
    chunk offset table in their regular "moov" atoms, a
    sample-to-chunk table ("stsc" atom) whose last entry had a
    "samples per chunk" count greater than 1 and DASH "trun" atoms,
    then mkvmerge was calculating wrong positions the frame content.
   bugfix MP4 reader: mkvmerge couldn't deal with the key frame index
    table having duplicate entries. The result was that only key
    frames up to and including the first duplicate entry were marked
    as key frames in the output file. All other frames weren't, even
    though some of them were referenced from the key frame table
    after the first duplicate entry.
   bufix MP4 reader: when an MP4 file contained more than one copy of
    the "moov" atom (the track headers etc.), mkvmerge was parsing
    them all adding tracks multiple times.
   bugfix MP4 reader: fixed an integer overflow during the timestamp
    calculation leading to files with wrong timestamps. Such files
    could not be played back properly by most players.
   bugfix MPEG TS reader: if the PMT lists a DVBSUB track, mkvmerge
    will now recognize it without having to find a packet for it
    within the probed range.
   bugfix splitting by parts (both the "timestamps" and the "frames"
    variants): fixed the calculation of track statistics tags. When
    calculating the duration the skipped portions weren't taken into
    account leading to a too-high duration. As a consequence the BPS
    tag (bits per second) was wrong, too.
   bugfix reading files with DVB/HDMV TextSV subtitle tracks with
    invalid CodecPrivate caused mkvmerge to abort with an error
    from boost::format about the format string not having enough
    arguments.
   bugfix: fixed misdetection of certain AC-3 files as MP3 files
    which led to an error message that
    "the demultiplexer could not be initialized".
   bugfix: fixed huge memory consumption when appending big Matroska
    files with sparse tracks (e.g. forced subtitle tracks).
    The Matroska reader will now queue at most 128 MB of data.
   bugfix MP4 reader: the timestamps of all multiplexed tracks will
    now be 0-based properly.
   bugfix MP4 reader: the DTS-to-PTS offsets given by the "ctts"
    atoms are now applied for all tracks containing a "ctts" atom,
    not just h.264 & h.265 tracks.
  * Some new features and enhancements
- Now required for man pages:
  libxslt-tools, docbook-xsl-stylesheets  and po4a

-------------------------------------------------------------------
Fri Jan 27 14:54:40 UTC 2017 - rpm@fthiessen.de

- Update to new release 9.8.0
  * mkvmerge: MP4 reader: when an MP4 file contained fewer entries
   for timestamps than frames (which they never should), mkvmerge
   would use 0 as the timestamp for all the other frames. This
   resulted in effects such as the last frame of an output file
   having a timestamp of 0 and in split files having a much longer
   duration than they should have. Fixes #1847.
  bug fix: the MPEG transport stream reader was using an outdated
   format for the "CodecPrivate" element for HDMV TextST subtitles.
   This has been updated to the current format which only contains
   the "dialog style element". Existing Matroska files using this
   outdated scheme can be fixed by running them through mkvmerge.
  bug fix: files smaller than 4 bytes were wrongly identified as
   MPEG transport streams.
  bug fix: if a codec delay is set for a track in the input file,
   it is kept. Fixes #1849. bug fix: fixed that the error message
   "not enough space on disk" was shown twice on some operating systems.
  teletext subtitle bug fix: fixed the handling of DVB teletext subtitles
   signaled with data unit ID 0x02 and that contain pages from multiple magazines.
  bug fix: when using --track-order without specifying all tracks,
   the track numbers could end up in a way the user did not expect.
   Now mkvmerge will always assign track numbers for those tracks
   that are listed in --track-order first. The other tracks are
   assigned numbers afterwards. Fixes the second part of #1832.
  bug fix: when reading Matroska files the movie title was always
   taken from the first Matroska source file, even if that file
   didn't have a title set. Fixes one part of #1832.
  MP4: fixed detection of MP3 audio when the object type ID in the
   ESDS signals MP2 and the track headers have invalid values for
   number of channels or sampling frequency. Fixes #1844.
  The command line option "--check-for-updates" has been removed.
  * GUI: the cache cleanup process that's run automatically when
   the GUI starts no longer blocks file identification until it
   is finished. Additionally the process will only be run once
   per release of MKVToolNix. Fixes #1860.
  certain failures during file identification that can be
   traced to broken installations won't be stored in the cache
   anymore. Without this fix the GUI would still use the cached
   failed identification result even though the underlying
   might have already been fixed. 
  multiplexer: changing default values in the preferences (e.g. the
   default track language to set) did not affect files whose
   identification results had already been cached.
  multiplex tool bug fix: under certain circumstances the GUI was
   creating invalid JSON files when starting to multiplex resulting
   in an error message ("JSON option files must contain a JSON
   array consisting solely of JSON strings").
  re-worked the startup code not to use lock files when trying to
   open a socket for communicating with an already-running instance.
   This aims to prevent situations with stale lock files not being
   cleaned up and the GUI not starting anymore as a result.
   This might fix or prevent issues like #1805.
  * A lot of new features and enhancements, please refer to NEWS.md
- Rebased disable-update-check.patch
- spec file cleanup
- Adjusted BuildRequires
  * Since 9.7.1 QT >= 5.3 is required
  * Since 9.7.1 a c++ compiler with some c++14 features is required
    e.g. gcc >= 4.9 or clang >= 3.4

-------------------------------------------------------------------
Wed Nov 30 18:05:23 UTC 2016 - rpm@fthiessen.de

- Update to new release 9.6.0
  * mkvmerge: bug fix: mkvmerge was entering endless loops under
     certain conditions when appending files.
    MPLS parser bug fix: fixed reading the "in" & "out"
     timestamps for "play items". This bug resulted in mkvmerge
     not reading the correct range from the referenced M2TS file
     under certain rare circumstances.
  * MKVToolNix GUI: job output tool bug fix: the button for
     acknowledging warnings & errors wasn't properly disabled when
     the user used outside methods of acknowledging them
  * mkvextract: VobSub bug fix: mkvextract will add a "langidx"
    line to the .idx file upon extraction.
  * mkvmerge & mkvextract: added support for HDMV TextST subtitles.

-------------------------------------------------------------------
Thu Oct 27 13:29:56 UTC 2016 - rpm@fthiessen.de

- Update to new release 9.5.0
  * mkvmerge: bug fix: The Ogg/OGM reader did not recognize Opus
     files with comment headers anymore.
    WAV reader bug fix: the track properties (channels, samplerate)
     for DTS and AC-3 in WAV will now be derived from the decoded
     bitstream headers instead of the WAV file header as the latter
     is often incorrect.
    WAV reader bug fix: fixed detection and merging of DTS in WAV
     that uses the 14-bytes-in-16-bytes packing method.
    MPEG transport stream reader bug fix: fixed mis-detection of
     certain h.264 files as MPEG transport streams.
    MPEG transport stream reader bug fix: fixed the handling of
     Blu-ray PCM audio with an odd number of channels by removing
     their alignment bytes.
    h.264 elementary stream handling bug fix: if mkvmerge ever
     encounters changing SPS or PPS NALUs (ones where their ID has
     been encountered before with different settings) in the h.264
     then it will prepend all following key frames with all
     currently active SPS and PPS NALUs. This enables playback from
     arbitrary key frames even if they require other SPS or PPS
     settings than the ones stored in the AVCC in CodecPrivate.
    VobSub handling bug fix: mkvmerge and mkvextract will now
     update the duration stored in the SPU bitsream with the
     duration from the container level if it differs at least 1ms.
  * mkvprpedit, MKVToolNix GUI: Added support for "field order"
     video track header element.
- Use GPG signature for verification.

-------------------------------------------------------------------
Fri Sep 16 15:36:19 UTC 2016 - rpm@fthiessen.de

- Update to new release 9.4.2:
  * mkvmerge: bug fix: using very large --sync values with certain
     container formats was causing mkvmerge to abort muxing.
    bug fix: fixed an invalid memory access (use after free)
     during global destruction phase.
    bug fix: HEVC parser: fixed three invalid memory accesses.
    bug fix: MP4 reader: fixed an invalid memory access
    bug fix: AAC reader: fixed mkvmerge throwing an uncaught
     exception due to the sample rate being 0.
    bug fix: MP4 reader: an error message will be printed
     instead of an uncaught exception when an invalid atom chunk
     size is encountered during resync.
    bug fix: AVC & HEVC readers: the readers will now refuse to
     handle files where the detected pixel width or height is
     equal to or less than 0.

-------------------------------------------------------------------
Thu Sep  1 15:36:44 UTC 2016 - rpm@fthiessen.de

- Update to new upstream release 9.4.0:
  * MKVToolNix GUI: merge tool bug fix: the automatic adjustments
     to the output file name based on the track types selected for
     muxing and the mechanism for keeping output file names unique
     had been broken since release v9.3.0.
    chapter editor bug fix: overly long chapter names don't cause
     the GUI's window to become overly wide anymore.
  * mkvmerge: bug fix: mkvmerge does no longer emit a warning if no
     comment header packet is found when reading tracks from
     Ogg/OGM files.
    bug fix: VP8 in Ogg: fixed dropping the first frame and the
     timestamp calculation.
    bug fix: when appending files mkvmerge wasn't starting clusters
     on video key frame anymore for the first and all following
     appended files.
    DTS bug fix: if present mkvmerge will use an XLL extension's
     sample rate information as the sample rate to put into
     the track headers.
  * mkvpropedit: bug fix: mkvpropedit will no longer say that it's
     writing the changes if only attachment changes are specified
     and none of the specified attachments can be found.
  * Some enhancements, please refer to the changelog within the
    package.

-------------------------------------------------------------------
Fri Jul 15 13:45:45 UTC 2016 - rpm@fthiessen.de

- Update to new upstream release 9.3.1:
  * libebml >= 1.3.4 and libmatroska >= 1.4.5 are now required
  * A lot of bugfixes and new features, new mkv elements are
    supported, for a list of all changes, please refer to the
    changelog provided by the package.

-------------------------------------------------------------------
Tue May 31 11:16:42 UTC 2016 - rpm@fthiessen.de

- Update to new upstream release 9.2.0:
* mkvmerge: bug fix: the "interval" chapter generation mode was
   always creating one chapter too many.
  bug fix: if a certain number of chapters had been generated with
   --generate-chapters then mkvmerge wasn't replacing the void
   placerholder with the actual chapters.
  bug fix: fixed detection of (E-)AC-3 in MPEG TS files with
   unusual stream types (e.g. 0x87) but with (E-)AC-3 PMT
   descriptors.
* mkvmerge, mkvextract: bug fix: fixed handling of Big Endian PCM
   with a bit depth other than 16, 32 or 64 bits/sample. Other
   formats were using the Little Endian codec ID, but their content
   was actually not byte-swapped to match it. Now those other bit
  depths are byte-swapped to Little Endian, too.
* MKVToolNix GUI: merge tool bug fix: the track column "default
   track in output" wasn't taking into account if the track had its
   "default track" flag set to "no" in the source file. This would
   result in the column showing "yes" in certain situations even
   though mkvmerge would assign "no".
* Some other improvements, some enhancements and other bugfixes,
   please refer to the changelog file provides with the package.

-------------------------------------------------------------------
Mon Apr 25 17:38:18 UTC 2016 - rpm@fthiessen.de

- Update to new upstream release 9.1.0:
* mkvmerge: bug fix: AVC/h.264: fixed handling of interlaced frames
   with bottom field first.
  bug fix: mkvmerge will no longer abort reading a Matroska file
   with a structural error right before the first cluster.
  bug fix: the "text_subtitles" property of the JSON/verbose
   identification modes was always set to true for all subtitle
   tracks, even for those that aren't text subtitles (VobSub, PG).
  bug fix: the language code signaled in the MPEG TS PMT is taken
   into account when selecting the character encoding to use
   during decoding of the teletext subtitles, not just the
   "national character set" stored in the teletext page headers.
* MKVToolNix GUI: bug fix: Fixed huge memory consumption in the
   JSON library by updating said JSON library.
  bug fix: In merge-tool: when adding playlists the GUI won't ask
   the user whether or not to scan if there's only a single
   playlist in that directory.

-------------------------------------------------------------------
Mon Mar 28 23:06:54 UTC 2016 - rpm@fthiessen.de

- Update to new upstream release 9.0.1:
* mkvmerge: bug fix: regression in v9.0.0: the text subtitle
   packetizer was wrongfully assuming an encoding of UTF-8 if none
   was given instead of assuming the system's encoding. Fixes #1639.
  bug fix: if too many chapters had been generated with
   --generate-chapters then mkvmerge created a bogus entry in the
   meta seek element and did not actually write the chapters to the
   file.
  bug fix: the DTS packetizer was setting the number of
   channels wrong sometimes when reducing to the DTS core. It was
   using the number of channels including the extensions instead of
   the channels of the core only.

-------------------------------------------------------------------
Mon Mar 28 10:22:11 UTC 2016 - jengelh@inai.de

- Update to new upstream release 9.0.0
* mkvmerge: bug fix: fixed two more issues in the conversion of
  teletext subtitles to SRT subtitles.
* mkvmerge: MP4/QuickTime reader: audio tracks with the FourCC
  "lpcm" are muxed as A_PCM/INT/LIT instead of A_QUICKTIME.
* mkvmerge: bug fix: MP4/QuickTime reader: audio tracks can contain
  two instances of certain header fields in the STSD atom;
  mkvmerge now uses the v2 structure over v0, if present.
* mkvextract: new feature: implemented the extraction of Big
  Endian PCM (codec ID A_PCM/INT/BIG) to WAV files. The content will
  be byte-swapped into Little Endian PCM in the process.
* mkvmerge: enhancement: Big Endian PCM tracks will now be
  byte-swapped into Little Endian PCM, and the codec ID
  A_PCM/INT/LIT will be used, as many players do not support BE PCM
  inside MKVs.

-------------------------------------------------------------------
Mon Feb 22 18:27:27 UTC 2016 - jengelh@inai.de

- Update to new upstream release 8.9.0
* gui: the default font size adjustment has been. Deactivated for
  the time being as it causes problems on high DPI Displays.
* gui: ampersands in file names were shown as keyboard shortcuts
  in tab titles in various tools
* gui: add ability (menu entry) for removing chapters from an
  existing Matroska file.
* Polish translation provided

-------------------------------------------------------------------
Sun Jan 10 13:48:52 UTC 2016 - rpm@fthiessen.de

- Update to upstream release 8.8.0:
  * MKVToolNix GUI: bug fix: when using one of the
     "select all tracks (of type…)" actions the "properties" column
     didn’t show the selection.
    bug fix: the paths used in the variables and the executable are
     converted to the platforms native path separators.
  * mkvmerge: bug fix: fixed a mis-detection of an MPEG-2 video
     elementary stream as a TrueHD file which then caused a
     segmentation fault.
    bug fix: Matroska attachments with the same name, size and MIME
     type were not output during file identification.
    bug fix: fixed TrueHD detection both as raw streams as well as
     inside other contains if the stream does not start with a
     TrueHD sync frame.
  * Some GUI enhancements and new features, see full changelog:
    https://bunkus.org/videotools/mkvtoolnix/doc/ChangeLog
- some spec file cleanup

-------------------------------------------------------------------
Thu Jan  7 16:01:00 UTC 2016 - rpm@fthiessen.de

- Update to upstream release 8.7.0:
  * all: reversion of a change: several ISO 639-2 codes of languages
      that are very old and not spoken anymore have been re-added
      due to feedback from users who did have a use for such codes.
     reversion of a change: all of the tools will write a byte-order
      mark (BOM) to text files encoded any of the UTF-* schemes again.
  * mkvmerge: bug fix: fixed the key frame detection for VP9 video
      tracks.
     bug fix: chapters were output as both "chapters" and
      "track_tags" in JSON identification mode.
     bug fix: AAC with low sampling frequencies was sometimes 
      mis-detected with the wrong profile preventing appending it
      to other AAC tracks.
     bug fix: the progress calculation was sometimes outputting
      negative numbers when appending Matroska files whose timestamps
      don’t start at 0.
     bug fix: fixed the decisions whether or not to write the last
      frame of a track as a BlockGroup or a SimpleBlock and whether
      or not to write a block duration for that frame.
     bug fix: the Matroska reader now uses TrueHD-specific code
      when reading Matroska files. This can fix things like wrong
      frame type flags.
  * MKVToolNix GUI: bug fix: relative file names given on the
      command line were interpreted as being relative to the user’s
      home directory.
     bug fix: the "split mode" drop-down box got reset to
      "do not split" each time the preferences dialog was closed
      with the "OK" button
  * And a lot more enhancements and bugfixes, see full changelog:
    https://bunkus.org/videotools/mkvtoolnix/doc/ChangeLog

-------------------------------------------------------------------
Sat Dec  5 15:47:20 UTC 2015 - rpm@fthiessen.de

- Update to upstream release 8.6.1:
 * all: MKVToolNix now requires gcc 4.8.0 or later or clang 3.4 or
    later for compilation.
   change: none of the tools will write a byte-order mark (BOM) to
   text files encoded any of the UTF-* schemes anymore.
 * mkvmerge: bug fix: the VC-1 handlig code was duplicating the
    first sequence headers with each mux.
   enhancement: added JSON as an output format for file type
    identification.
   bug fix: fixed two issues causing mkvmerge to write invalid data
    when updating track headers.
   bug fix: the change to do a deeper file analysis if no seek head
    was found was causing huge increases in file type detection time
    as popular tools like x264 don’t write seek heads. The way
    elements at the end are searched has been changed to only scan
    the last 5 MB of the file instead of iterating over every
    level 1 element from the beginning of the file.
 * MKVToolNix GUI: bug fix: the options for linking to the
    next/previous segment UID were wrong.
   bug fix: the program changes its working directory to the
    user’s profile/home directory on startup allowing the removal of
    its installation folder even if a program started by the GUI
    (e.g. a web browser) is still running.
   bug fix: in certain situations the modified file would not contain
    a seek head before the first cluster anymore resulting in most
    players not finding elements such as attachments or the index
    located at the end of the file anymore.
 * Some other enhancements and bugfixes, see full changelog:
   https://bunkus.org/videotools/mkvtoolnix/doc/ChangeLog
- Split package into commandline- (base) and gui-package,
  reduces overhead when installing on a headless system.
- Replaced sed in prep with disable-update-check.patch to disable
  update check on startup (not needed with a package system).
- Added mkvtoolnix-use-system-boost.patch from fedora to fix includes
  when building against boost from system.

-------------------------------------------------------------------
Thu Nov  5 22:41:02 UTC 2015 - rpm@fthiessen.de

- Update to upstream release 8.5.2:
 * mkvmerge: bug fix: fixed an endless loop when updating track
    headers caused by the fix for "Re-rendering track headers.
   bug fix: mkvmerge no longer creates a "next segment UID" field
    in the last file when splitting and segment linking is active.
   bug fix: fixed the values of the "previous/next segment UID"
    elements when splitting by parts with segment linking enabled.
 * MKVToolNix GUI: bug fix: the file/track columns aren't resized
    to fit their content when expanding/collapsing tree node
    anymore. Such expansion also happened when moving entries with
    the "move up/down" buttons.

-------------------------------------------------------------------
Thu Oct 22 11:47:36 UTC 2015 - rpm@fthiessen.de

- Update to upstream release 8.5.1 (security update):
* build system: libEBML v1.3.3 and libMatroska v1.4.4 are now
   required due to important fixes for invalid memory accesses in
   those two releases. The copies included in the MKVToolNix source
   code have been updated to those releases as well.
* MKVToolNix GUI: bug fix: the "save file" dialogs did not have
   the currently entered file name pre-selected anymore.
   bug fix: fixed a crash when loading corrupted
   job settings.
   bug fix (Linux): the function "open folder" was
   inserting a superfluous leading slash in the directory name.
* mkvmerge: bug fix: updating the track headers wasn't working in
   some rare cases (corresponding error message "Re-rendering track
   headers: data_size != 0 not implemented yet").
- Disable default setting for checking for updates (nonsense on a
  package system)
-------------------------------------------------------------------
Sun Oct 18 00:02:36 UTC 2015 - rpm@fthiessen.de

- Updated to version 8.5.0:
* Modified .spec to also install translated manpages.
* A lot of small bugfixes and enhancements.
* MKVToolNix GUI: merge tool bug fix: the cropping parameters were
   not converted into parameters for mkvmerge at all.
* mkvmerge: enhancement: the verbose identification for MP4 files
   will now derive basic audio parameters of MP3 and AC3 tracks
   from the bitstream instead of relying on the values in the
   track headers.
   bug fix: PCM tracks: if the number of samples per
   packet varies then no default duration will be written.
* all: several ISO 639-2 codes of languages that are very old and
   not spoken anymore have been removed.
   new feature: added a Catalan translation of
   the man pages.

-------------------------------------------------------------------
Tue Sep 22 13:56:09 UTC 2015 - rpm@fthiessen.de

- Updated to version 8.4.0:
* MMG has been removed.
* Dropped wxWidgets dependencies (new gui uses QT).
* A lot of bugfixes and enhancements of the gui and mkvmerge
  (see https://bunkus.org/videotools/mkvtoolnix/doc/ChangeLog).
* mkvmerge: bug fix: calculating of delay for audio garbage data
  got fixed.
* all: bug fix: parsing of strings containing negative values or
  timecodes was broken on 32-but architectures.
* mkvmerge: bug fix: number of channels and the sample rate
  reported for DTS in MPEG streams was 0.

-------------------------------------------------------------------
Sun Aug 16 23:39:31 UTC 2015 - jengelh@inai.de

- Update to new upstream release 8.3.0
* many small GUI bug fixes and improvements
* mkvmerge: bug fix: fixed handling of MPEG transport streams
  where all PATs and PMTs have CRC errors.
* mkvmerge: bug fix: the MPEG-1/2 video code was causing an
  illegal memory access under certain conditions.
* mkvmerge: bug fix: fixed recognition of (E)AC3 audio tracks
  using a FourCC of "ec-3"
* mkvmerge: bug fix: fixed codec identification for MP2 audio read
  from MPEG PS/TS.
* mkvmerge: bug fix: fixed key frame designation for video tracks
  in MP4 DASH files.

-------------------------------------------------------------------
Wed Aug  5 08:36:57 UTC 2015 - rpm@fthiessen.de

- Update to version 8.2.0:
* Fix mkvmerge codec identification for MP2 audio.
  A LOT more bugfixes especially in the GUI. See ChangeLog:
  https://bunkus.org/videotools/mkvtoolnix/doc/ChangeLog

-------------------------------------------------------------------
Fri May 29 13:22:09 UTC 2015 - dimstar@opensuse.org

- Update to version 7.9.0:
* Fix build with boost 1.58.0.
* build system: configure will now check for Qt by default.
* A couple of important bugs have been fixed, e.g. a very old bug
  in handling MPEG-1/2 video preventing the detection of such
  tracks; if --sync was used at the same time as --default-duration
  then --sync was ignored; mkvinfo’s exit codes were wrong (this
  may trip up frontends using mkvinfo!); handling of E-AC3 in MPEG
  transport stream in certain situations.

-------------------------------------------------------------------
Sat Mar 28 22:06:54 UTC 2015 - jengelh@inai.de

- Update to new upstream release 7.8.0
* mkvmerge: Fixed recognition of E-AC3 audio tracks in MPEG TS
  streams if they use the type ID 0xa1 (and the same for DTS tracks
  stored with type ID 0xa2).
* mkvmerge: new feature: mkvmerge will now recognize TrueHD tracks
  inside MPEG transport streams that contain an AC3 core as
  consisting of two tracks.
* mkvmerge: new feature: mkvmerge will now recognize TrueHD+AC3
  files as consisting of two tracks.

-------------------------------------------------------------------
Tue Feb 10 17:17:56 UTC 2015 - opensuse@sukimashita.com

- Update to new upstream release 7.6.0
* all programs: bug fix: Since release 7.0.0 the wrong exit code 
  was used when warnings were finished (0 instead of 1).
* mkvmerge: bug fix: Appending chapters with the same chapter UID
  was dropping all sub-chapters from the one of the two merged
  chapters. Now the sub-chapters are merged recursively as well.
* mkvmerge: bug fix: The wrong Codec ID was written when reading
  PCM tracks from Matroska files in Big Endian byte order.
* all: new feature: added a Serbian (Latin) translation of the
  programs by Danko (see AUTHORS).
* mkvmerge: bug fix: If splitting was active and AC3 tracks read
  from Matroska files were shorter than a split point then the
  following output file would contain an AC3 packet with the
  timecode of 00:00:00 somewhere in the middle.
* mmg: bug fix: If a chapter track from a Matroska file is
  selected then the »language« drop-down box is disabled.
* mmg: bug fix: When scanning for play lists the window presenting
  the results listed some properties in an unescaped way (e.g.
  »\s« instead of spaces).
* mmg: bug fix: When adding MPLS files mmg was only offering to
  scan for more playlists if there were at least two additional
  MPLS files present. This has been fixed to one MPLS file (in
  addition to the one just added).

-------------------------------------------------------------------
Sun Feb  1 17:24:56 UTC 2015 - jengelh@inai.de

- Update to new upstream release 7.5.0
* mkvmerge: Fixed reading MPEG transport streams in which
  all PATs and/or PMTs have CRC errors.
* mkvmerge: Implemented support for MP4 DASH files.
* mkvmerge: Implemented reading MPEG-H p2/HEVC video
  tracks from MP4 files.
* mkvmerge: Implemented support for AAC in LOAS/LATM multiplex if
  read from MPEG transport streams or raw LOAS/LATM AAC files.
* mkvmerge: Added support for recognizing H.265/HEVC video tracks
  in MPEG transport streams.

-------------------------------------------------------------------
Sat Dec 13 08:18:22 UTC 2014 - coolo@suse.com

- update to upstream release 7.4.0
* Implements support for PCM in MPEG program (.vob – DVDs) and 
  transport streams (.ts, .m2ts – Blu-rays, television broadcasts) 
  as well as for teletext subtitles in MPEG tranport streams. 
  Apart from that a lot of work has gone into the new GUI.
* Bugfixes for muxing HEVC or teletext subtitles

-------------------------------------------------------------------
Sun Oct  5 21:53:44 UTC 2014 - jengelh@inai.de

- Update to new upstream release 7.2.0
* Fixed calculating AC3 delay from garbage data when reading AC3
  from AVIs.
* SSA/ASS files with sections after "[Events]" in their
  CodecPrivate are now handled correctly.
* Fixed handling certain edit list types in MP4 files that are used
  for positive track delays.
- Drop extra %attr, default permissions are already good
- Switch to wxWidgets 3 for building

-------------------------------------------------------------------
Wed Aug  6 07:15:49 UTC 2014 - jengelh@inai.de

- Update to ne wupstream release 7.1.0
* mkvextract: bug fix: Fixed a crash when opening damaged/invalid
  Matroska files in all extraction modes.
* mkvmerge: bug fix: Fixed wrong default duration for PCM audio
  tracks if the source file provides timecodes for that track.
* mkvmerge: bug fix: track statistics tags are not written for
  WebM files anymore as the WebM specification doesn't allow tags.
* Fixed file seeking code for "seek relative to end of file" case.

-------------------------------------------------------------------
Fri Jul 11 16:19:01 UTC 2014 - reddwarf@opensuse.org

- Update to 7.0.0
  * mkvmkerge will now write certain track-specific statistics (such as bit rate) as tags.

-------------------------------------------------------------------
Mon Apr 21 10:31:34 UTC 2014 - i@marguerite.su

- update version 6.9.1
  * mkvmerge: bug fix: fixed huge memory usage when probing files
   (it was reading the whole file into memory for that).

-------------------------------------------------------------------
Tue Mar  4 15:55:55 UTC 2014 - reddwarf@opensuse.org

- Update to 6.8.0
  * Add support for h.265/HEVC video

-------------------------------------------------------------------
Thu Jan  9 16:10:48 UTC 2014 - reddwarf@opensuse.org

- Update to 6.7.0
  * Tons of bug fixes all over the place
  * Reading from an MPLS playlist file is now done as if the second
    and following files referenced in that playlist had been appended
    to the first file from that playlist
  * A couple of enhancements.
  * Ruby 1.9.x is now required for building

-------------------------------------------------------------------
Mon Dec  2 17:41:30 UTC 2013 - reddwarf@opensuse.org

- Update to 6.6.0
  * mmg: new feature: implemented drag & drop in the chapter
  * mmg: bug fix: fixed an assertion in wxLogMessage() due to wrong
    format string/argument data types caused by changes in wxWidgets
    3.0.0. See Debian bug #730273.
  * mkvmerge: bug fix: improved resilience against MP4 files with
    obviously wrong entries in the 'sample size table' (STSZ) atom.
  * mkvmerge: bug fix: improved VC1 frame type detection so that it
    works even for streams without entry points.
  * mkvinfo: bug fix: at most the lower 32bits of the track numbers
    and track UIDs elements were output, even if the element in the
    file used more bits. Fixes #935.
  * mkvmerge: bug fix: fixed accessing invalid memory in the memory
    handling core routines. May be triggered by the code to remove
    filler NALUs introduced in v6.5.0. Fixes #931.
  * mmg: bug fix: fixed the tracks list box on the input tab being
    invisible/0 pixels high with wxWidgets 2.9.x/3.x.
  * all: integrated the Portuguese translation. Although the
    translation files themselves had been added back in 6.3.0 that
    translation wasn't available for selection due to forgetfulness on
    my part.
  * mkvmerge: bug fix: The file detection code in the MPEG
    elementary stream reader had a logic error. Fixes #928. In
    practice this logic error didn't have any consequence.

-------------------------------------------------------------------
Sat Nov  2 19:43:53 UTC 2013 - reddwarf@opensuse.org

- Update to 6.5.0
  * Opus support has been finalized both in muxing and extraction
  * Support for the VP9 video codec has been added
  * A German translation for the man pages has been added
  * configure can detect Boost installed in multiarch directories
  * Several bugs have been fixed here and there

-------------------------------------------------------------------
Mon Jul  1 16:31:05 UTC 2013 - jengelh@inai.de

- Update to new upstream release 6.3.0
* MPEG programs streams with broken PES structures are now handled
  better.
* WAV extraction and FLV reading has been fixed for certain
  edge cases.
* --fix-bitsteam-timing-information has been fixed for framed
  AVC/h.264 sources.
* Using --default-duration while appending AVC/h.264 tracks has
  been fixed.
* A Portuguese translation has been added.

-------------------------------------------------------------------
Mon May  6 10:22:02 UTC 2013 - reddwarf@opensuse.org

- Update to 6.2.0
  * Memory usage has been reduced severely

-------------------------------------------------------------------
Sun Mar 31 17:57:37 UTC 2013 - schwab@suse.de

- Override boost library directory to handle all lib64 platforms

-------------------------------------------------------------------
Sun Mar 24 14:30:03 UTC 2013 - reddwarf@opensuse.org

- Use external libebml and libmatroska versions
- The minimum gcc version is 4.7

-------------------------------------------------------------------
Mon Mar 18 17:57:54 UTC 2013 - reddwarf@opensuse.org

- Update to 6.1.0
  * Support for Blu-ray playlists (MPLS files)
  * A couple of bugfixes
  * New reader for the FlashVideo file format (.flv -- yes, for those YouTube videos)
  * Splitting by frame/field numbers
  * Splitting by chapter numbers,
  * Splitting into parts by frame/field numbers
  * Reading VobSubs from MP4 files
  * Save additional command line options as default options in mmg
  * Header removal compression has been turned off by default in both mkvmerge and mmg

-------------------------------------------------------------------
Tue Jan  8 15:33:18 UTC 2013 - reddwarf@opensuse.org

- Update to 5.9.0
  + Fixes several bugs
  + Writes the newly introduced elements "cue duration" and "cue
    relative position" which provide more detailed information for
    seeking
- Use internal versions of libebml and libmatroska until the needed
  versions are released

-------------------------------------------------------------------
Mon Sep  3 20:01:09 UTC 2012 - reddwarf@opensuse.org

- Update to 5.8.0
  + Adds a couple of new features
  + Fixes a few bugs; most prominently mmg not displaying mkvmerge's last couple of messages.

-------------------------------------------------------------------
Tue Jul 10 10:05:24 UTC 2012 - reddwarf@opensuse.org

- Update to 5.7.0
  + Fixed the excessive CPU usage during muxing

-------------------------------------------------------------------
Sun May 27 17:49:10 UTC 2012 - reddwarf@opensuse.org

- Update to 5.6.0
  + It fixes a couple of important issues with the new "--split
    parts:" functionality
  + Other bugs were fixed as well
  + A Polish translation of the programs has been added
  + A Spanish translation of mmg's guide has been added

-------------------------------------------------------------------
Wed May 16 21:01:52 UTC 2012 - reddwarf@opensuse.org

- Now rake broke. Going back to drake.

-------------------------------------------------------------------
Thu Apr 26 19:28:50 UTC 2012 - reddwarf@opensuse.org

- Use system version of rake instead of the included drake. Fixes
  build in Factory/12.2.

-------------------------------------------------------------------
Sun Apr  8 19:18:50 UTC 2012 - reddwarf@opensuse.org

- Update to 5.5.0
  * Tag, chapter and segment info XML files supporting more of the
    Matroska spec.
  * A new mode for "--split" has been implemented that let's you
    keep certain ranges and discard others without the need for
    temporary files or multiple muxing passes.
- Remove support for openSUSE < 11.4.
- Stop using obsoleted %suse_update_desktop_file.

-------------------------------------------------------------------
Sat Mar 10 22:57:54 UTC 2012 - reddwarf@opensuse.org

- Update to 5.4.0
  * The AVC/h.264 timecode assignment code has been completely
    rewritten. Users do not have to specify the default
    duration/FPS for such tracks anymore safe for the rarest cases.
  * Tons of bug fixes.
  * Improvements regarding file type recognition.
  * Complete re-write of the (E)AC3 parsing code.

-------------------------------------------------------------------
Mon Mar  5 10:53:43 UTC 2012 - reddwarf@opensuse.org

- Update to 5.3.0
  * Fix DTS handling.
  * Fix (E)AC3 detection.
  * Fix invalid memory access with certain broken files.
  * mkvmerge's verbose identification mode has been extended with
    a couple more fields.
  * mkvmerge can treat several separate input files as if they
    were concatenated into a single large file.

-------------------------------------------------------------------
Mon Feb 13 10:50:23 UTC 2012 - coolo@suse.com

- patch license to follow spdx.org standard

-------------------------------------------------------------------
Sun Dec 18 19:55:28 UTC 2011 - reddwarf@opensuse.org

- Update to 5.2.0
  - Fixes a lot of smaller issues.
  - Performance enhancements.

-------------------------------------------------------------------
Tue Nov 29 22:27:05 UTC 2011 - reddwarf@opensuse.org

- Update to 5.1.0
  - Lot of small bug fixes.
  - Greatly improves support for MPEG transport streams.

-------------------------------------------------------------------
Sun Oct 16 09:37:57 UTC 2011 - reddwarf@opensuse.org

- Update to 5.0.1
  - Implemented support for yet another way of storing EAC3 and DTS
    in MPEG transport streams.
  - bug fix: Track information was not reset when opening more than
    one file in the GUI.
  - bug fix: The PGS subtitle output module was not outputting any
    packet in certain cases due to uninitialized variables.
  - bug fix: Fixed mkvmerge not finding any track in TS streams
    whose first PMT packet could not be parsed (e.g. invalid CRC).
  - bug fix: Fixed detection of TS streams that only contain one
    PAT or PMT packet within the first few KB but no others within
    the first 10 MB.

-------------------------------------------------------------------
Mon Sep 26 23:35:31 UTC 2011 - reddwarf@opensuse.org

- Update to 5.0.0
  - Lot of small bug fixes.
  - Support for MPEG transport streams.
- Remove mkvtoolnix-4.9.1-shared_libs.patch. A better fix was
  applied upstream.
- Use pkgconfig(XX) BuildRequires when available.
- Remove obsoleted BuildRoot and %clean sections.

-------------------------------------------------------------------
Sat Jul 23 11:08:15 UTC 2011 - reddwarf@opensuse.org

- Update to 4.9.1
  - It's mostly a bug fix release with few new features.
- Stop source service usage: Factory is moving to a slightly
  different approch to verify source authenticity. Consequently,
  specify a full URL as Source.

-------------------------------------------------------------------
Thu Mar 10 18:07:20 UTC 2011 - reddwarf@opensuse.org

- Update to 4.6.0
  - It contains a couple of bug fixes as well as a few new
    features.
  - New translation available, Turkish.

-------------------------------------------------------------------
Tue Feb  1 19:02:52 UTC 2011 - reddwarf@opensuse.org

- Update to 4.5.0
  - It contains a lot of bug fixes as well as a couple of new
    features and a few enhancements

-------------------------------------------------------------------
Mon Jan 17 18:21:45 UTC 2011 - reddwarf@opensuse.org

- Fix pre-11.4 build broken in previous commit
- Use new icons/MIME/desktop macros in >= 11.4

-------------------------------------------------------------------
Wed Dec 29 15:01:24 CET 2010 - sbrabec@suse.cz

- Compile with wxWidgets (STL variant).

-------------------------------------------------------------------
Wed Nov 10 22:42:59 UTC 2010 - reddwarf@opensuse.org

- Own nl and zh_CN man dirs in >11.2

-------------------------------------------------------------------
Tue Nov  2 10:04:07 UTC 2010 - reddwarf@opensuse.org

- Update to 4.4.0
  - It contains a lot of bug fixes and a few enhancements but no
    major new features
- Drop mkvtoolnix-4.3.0-aliasing.patch
- Update mkvtoolnix-4.4.0-guide_install.patch

-------------------------------------------------------------------
Sun Sep  5 17:49:35 UTC 2010 - reddwarf@opensuse.org

- Update to 4.3.0
  - It contains a lot of bug fixes and a few enhancements but no
    major new features
- mkvmerge-gui symlink is not available anymore, use mmg instead

-------------------------------------------------------------------
Thu Jul 29 17:03:12 UTC 2010 - reddwarf@opensuse.org

- Update to 4.2.0
  - It contains a lot of bug fixes and a few enhancements but no
    major new features
- Revert last commit since broke openSUSE 11.1 build

-------------------------------------------------------------------
Sun Jul 11 13:18:59 UTC 2010 - jengelh@medozas.de

- Rerun autoreconf to retrieve ax_boost_base.m4 where libdir
  detection is fixed
- Use %_smp_mflags

-------------------------------------------------------------------
Sat Jul  3 21:49:34 UTC 2010 - cmorve69@yahoo.es

- Update to 4.1.1
  - Fix serious bug introduced in v4.1.0. If causes mkvmerge to
    crash with default option in various circumstances, especially
    when handling MPEG-4 part 2 video tracks.

-------------------------------------------------------------------
Thu Jul  1 15:35:34 UTC 2010 - cmorve69@yahoo.es

- Update to 4.1.0
  - A couple of bug fixes and enhancements especially in
    combination with WebM.
  - Full support for PGS/SUP subtitles.
  - New and improved translations.

-------------------------------------------------------------------
Sat Jun  5 20:35:11 UTC 2010 - cmorve69@yahoo.es

- Update to 4.0.0
  - Full support for the WebM variant of the Matroska container
    format, VP8 video tracks, the IVF container format
  - Several important bug fixes and a few new features
  - New translations

-------------------------------------------------------------------
Fri Mar 26 17:20:08 UTC 2010 - cmorve69@yahoo.es

- Update to version 3.3.0:
  Several important bug fixes and a few new features.

-------------------------------------------------------------------
Sat Feb 13 10:19:58 UTC 2010 - cmorve69@yahoo.es

- Update to version 3.2.0:
  The usual mix of bug fixes and smaller enhancements.

-------------------------------------------------------------------
Fri Jan 22 16:31:50 UTC 2010 - cmorve69@yahoo.es

- Update to version 3.1.0:
  The usual mix of bug fixes and smaller enhancements.

-------------------------------------------------------------------
Mon Jan 11 11:30:27 UTC 2010 - per@osbeck.com

- Add patch to fix synch issues with theora 1.1

-------------------------------------------------------------------
Sun Dec 13 10:26:00 UTC 2009 - cmorve69@yahoo.es

- Update to version 3.0.0:
  + Fix for mkvpropedit and mmg: editing headers of files created
    by HandBrake would cause crashes and/or corrupted files after
    saving.

-------------------------------------------------------------------
Fri Dec  4 21:12:37 UTC 2009 - cmorve69@yahoo.es

- Remove dates from binaries so builds are reproducible

-------------------------------------------------------------------
Thu Nov 26 18:31:11 UTC 2009 - cmorve69@yahoo.es

- Update to version 2.9.9:
  + bug fixes (see ChangeLog)
  + added a new program 'mkvpropedit'

-------------------------------------------------------------------
Sat Aug 22 02:20:14 UTC 2009 - cmorve69@yahoo.es

- Remove unneeded scriptlets

-------------------------------------------------------------------
Fri Aug 21 14:29:28 CEST 2009 - cmorve69@yahoo.es

- Update to version 2.9.8:
  + bug fixes (see ChangeLog)
  + speed-ups for large files

-------------------------------------------------------------------
Thu Jul  2 15:55:27 CEST 2009 - seife@suse.de

- update to v2.9.7:
  mostly bug fixes and two prominent changes to mmg:
  - chapters and tags are now handled in the same way that tracks
    are: they can be checked individually, and properties like
    charset can be set for each entry
  - it is now possible to change the list of "common" languages
    that appear at the top of language drop down boxes

-------------------------------------------------------------------
Sun Jun  7 21:44:17 CEST 2009 - seife@suse.de

- update to v2.9.5:
  The usual mix of bug fixes, new features and smaller
  enhancements. Also some of the command line options have been
  renamed (check the ChangeLog for details). The old versions are
  still working for the time being, and users of mmg aren't
  affected by this change anyway.

-------------------------------------------------------------------
Mon May 11 09:13:22 CEST 2009 - seife@suse.de

- update to v2.8.0:
  - a lot of smaller and larger bug fixes (see ChangeLog)
  - new translation to simplified Chinese

-------------------------------------------------------------------
Mon Apr 20 09:57:00 CEST 2009 - seife@suse.de

- update to v2.7.0
  - support for more audio formats
  - localization fixes
  - various bugfixes in mmg and mkvmerge, see ChangeLog

-------------------------------------------------------------------
Wed Mar 25 11:56:59 CET 2009 - seife@suse.de

- update to v2.6.0:
  - add a header editor for existing Matroska files
  - add japanese translation
  - a couple of fixes daeling with charset and translation issues

-------------------------------------------------------------------
Tue Mar 17 09:57:07 CET 2009 - seife@suse.de

- update to v2.5.3:
  - localization fixes
  - mkvmerge segfault fix
  - mkvmerge attachment bugfix

-------------------------------------------------------------------
Thu Mar  5 13:21:50 CET 2009 - seife@suse.de

- update to v2.5.2:
  - fix locale detection
  - fixes for wxWidgets 2.8.0
  - mkvinfo's GUI is now translatable
  - some mmg bug fixes

-------------------------------------------------------------------
Mon Feb 23 11:10:02 CET 2009 - seife@suse.de

- update to v2.5.1:
  - made most of the programs translatable
  bug fixes in mkvextract:
  - time code extraction
  bug fixes in mmg:
  - possible crash in the chapter editor
  - another crash fixed
  bug fixes in mkvmerge:
  - AAC file detection fix

-------------------------------------------------------------------
Sun Jan 18 19:18:12 CET 2009 - seife@suse.de

- update to v2.4.2:
  bug fixes in mkvmerge:
  - subtitles in multiple subtitle files could have wrong timestamp
  - OGM files were reported as having arbitrary display size
  - hanlding of matroska files containing attachments was faulty
  - the parser for the simple chapter format could not handle more
    than 100 chapters
  - crash when using "--engage native_mpeg4" (segfault) fixed
  bug fixes in mmg:
  - the commands "Save command line" and "Create option file" did
    not work correctly.
  for other enhancements, please see ChangeLog

-------------------------------------------------------------------
Fri Dec  5 16:32:07 CET 2008 - seife@suse.de

- update to v2.4.1:
  - lots of mmg and mkvmerge bugfixes, please see ChangeLog
  mkvmerge new features:
  - add support fro reading SRT and SSA/ASS subtitles from AVI

-------------------------------------------------------------------
Mon Oct 13 08:53:59 CEST 2008 - seife@suse.de

- update to v2.4.0
  - lots of mmg and mkvmerge bugfixes, please see ChangeLog
  mkvmerge new features:
  - add support for Dirac video tracks
  - add support for muxing VC1 video tracks from MPEG PS or raw
    VC1 elementary streams
  - add support for 7.1 channel EAC3 files
  mkvextract new features:
  - support for extracting Theora video tracks into Ogg files
  - handle SimpleBlocks for timecode extraction

-------------------------------------------------------------------
Tue Sep 16 20:08:06 CEST 2008 - seife@suse.de

- update to v2.3.9
  - lots of stuff, please see the ChangeLog file
  - lots of bugfixes in mkvmerge
  - switched from PCRE to Boost's RE library
  mkvmerge new features:
  - support for DTS-HD
  - improved support for WAV-files greater than 4G
  - improved error messages
  - support for OGG kate subtitles
  - support for PCM tracks with floating point numbers
  - support for Vorbis in AVI

-------------------------------------------------------------------
Sun Aug 31 00:12:05 CEST 2008 - seife@suse.de

- add libexpat-devel to buildrequires
- add %debug_package for buildservice build

-------------------------------------------------------------------
Thu Mar  6 22:58:59 CET 2008 - seife@suse.de

- fix buildservice build (missing pcre-devel buildrequires)

-------------------------------------------------------------------
Wed Mar  5 16:56:32 CET 2008 - seife@suse.de

- update to v2.2.0
  - lots of stuff, please see the ChangeLog file
  - most notable, some major bug fixes (lots of crashes should be
    gone) and some new features
- gcc-4.3 fixes incorporated upstream
- remove unneeded build dependencies

-------------------------------------------------------------------
Fri Oct 26 12:28:11 CEST 2007 - seife@suse.de

- update to v2.1.0
  - lots of stuff, please see the ChangeLog file
  - most notable, support for EAC3 and AVC tracks
  - a few memleaks fixed in mkvmerge
- fix build with gcc43

-------------------------------------------------------------------
Thu Oct 11 16:39:38 CEST 2007 - sbrabec@suse.cz

- Removed bogus dependency on mDNSResponder.

-------------------------------------------------------------------
Sun May 27 00:07:56 CEST 2007 - ro@suse.de

- added libmatroska-devel to buildreq

-------------------------------------------------------------------
Thu Feb 22 21:11:55 CET 2007 - seife@suse.de

- update to v2.0.2
 - lots of stuff, please see the ChangeLog file
 - mkvmerge-gui is now called "mmg" as in the upstream version

-------------------------------------------------------------------
Tue Nov  7 16:27:42 CET 2006 - seife@suse.de

- update to v1.7.0
 - mkvmerge: Added support for MIME type detection via libmagic
 - mkvmerge: bug fix: Theora headers were not handled correctly
 - mkvmerge: bug fix: WavPack reader was broken on 64bit systems
 - mkvmerge: bug fix: Theora timecode handling was broken
 - mmg: 'adjust timecodes' function accepts timecodes like
   'XXXXXunit' with 'unit' being 'ms', 'us', 'ns' or 's'.
 - mkvmerge: bug fix: Quicktime/MP4 reader: Added support for
   version 1 media headers ('mdhd' atom) with 64bit fields. Fixed
   the duration of the last packet passed downstream. Fixed overflow
   issues during re-scaling from the Quicktime/MP4's time scale to
   nano seconds used by mkvmerge.
 - mkvmerge: add support for the "Delay:" feature and for negative
   timecodes in VobSub IDX files.
 - mmg: bug fix: Re-added Chinese to the list of popular languages
 - mkvmerge: bug fix: The last change to the ISO 639 language
   handling broke the VobSub reader so that it reported the wrong
   language codes. This also caused mmg to not display the correct
   language after adding a VobSub file.

-------------------------------------------------------------------
Wed May 24 21:40:52 CEST 2006 - schwab@suse.de

- Don't strip binaries.

-------------------------------------------------------------------
Wed Jan 25 21:38:20 CET 2006 - mls@suse.de

- converted neededforbuild to BuildRequires

-------------------------------------------------------------------
Thu Dec 22 20:35:53 CET 2005 - seife@suse.de

- version update to 1.6.5

-------------------------------------------------------------------
Wed Nov 23 11:53:10 CET 2005 - seife@suse.de

- added -fno-strict-aliasing

-------------------------------------------------------------------
Mon Nov 21 19:44:25 CET 2005 - seife@suse.de

- version update to 1.6.0

-------------------------------------------------------------------
Sun Sep 25 23:33:07 CEST 2005 - seife@suse.de

- version update to 1.5.6

-------------------------------------------------------------------
Fri Aug 26 12:07:33 CEST 2005 - seife@suse.de

- version update to 1.5.5

-------------------------------------------------------------------
Tue Jul  5 13:49:40 CEST 2005 - seife@suse.de

- version update to 1.5.0

-------------------------------------------------------------------
Sun Apr 17 10:30:09 CEST 2005 - seife@suse.de

- version update to 1.4.2

-------------------------------------------------------------------
Tue Mar  1 16:20:28 CET 2005 - seife@suse.de

- version update to 1.4.0

-------------------------------------------------------------------
Mon Feb  7 09:40:16 CET 2005 - seife@suse.de

- version update to 1.0.2

-------------------------------------------------------------------
Wed Dec 22 18:17:52 CET 2004 - seife@suse.de

- version update to 1.0.1

-------------------------------------------------------------------
Thu Nov 18 14:02:40 CET 2004 - seife@suse.de

- version update to 1.0

-------------------------------------------------------------------
Tue Oct 26 20:03:31 CEST 2004 - seife@suse.de

- version update to 0.9.7

-------------------------------------------------------------------
Mon Sep 13 17:52:14 CEST 2004 - seife@suse.de

- renamed mmg to mkvmerge-gui (conflict with mupad)
  Made main window resizeable for high resolution displays.

-------------------------------------------------------------------
Wed Sep  1 23:59:41 CEST 2004 - seife@suse.de

- initial submission

Places

File mkvtoolnix.changes of Package mkvtoolnix (Revision d9ff42003c8cc42a72e524ba198bc1da)

Places