File python-python-dateutil.changes of Package python-python-dateutil

Overview Repositories Revisions Requests Users Attributes Meta

File python-python-dateutil.changes of Package python-python-dateutil (Revision 861d697cec75d949ab0a9e358c0d69c4)

Currently displaying revision 861d697cec75d949ab0a9e358c0d69c4 , Show latest

-------------------------------------------------------------------
Mon Oct 14 14:36:03 UTC 2019 - Matej Cepl <mcepl@suse.com>

- Replace %fdupes -s with plain %fdupes; hardlinks are better.

-------------------------------------------------------------------
Mon Feb 25 12:05:09 UTC 2019 - Tomáš Chvátal <tchvatal@suse.com>

- Switch to _multibuild to not create buildcycle

-------------------------------------------------------------------
Thu Feb 21 11:00:12 UTC 2019 - Hans-Peter Jansen <hpj@urpla.net>

- Update to 2.8.0 (2019-02-04)
  + Data updates
    * Updated tzdata version to to 2018i.
  + Features
    * Added support for EXDATE parameters when parsing rrule
      strings. Reported by @mlorant (gh issue #410), fixed by
      @nicoe (gh pr #859).
    * Added support for sub-minute time zone offsets in Python
      3.6+. Fixed by @cssherry (gh issue #582, pr #763)
    * Switched the tzoffset, tzstr and gettz caches over to using
      weak references, so that the cache expires when no other
      references to the original tzinfo objects exist. This cache-
      expiry behavior is not guaranteed in the public interface and
      may change in the future. To improve performance in the case
      where transient references to the same time zones are
      repeatedly created but no strong reference is continuously
      held, a smaller “strong value” cache was also added. Weak
      value cache implemented by @cs-cordero (gh pr #672, #801),
      strong cache added by Gökçen Nurlu (gh issue #691, gh pr
      #761)
  + Bugfixes
    * Added time zone inference when initializing an rrule with a
      specified UNTIL but without an explicitly specified DTSTART;
      the time zone of the generated DTSTART will now be taken from
      the UNTIL rule. Reported by @href (gh issue #652). Fixed by
      @absreim (gh pr #693).
    * Fixed an issue where parser.parse would raise Decimal-
      specific errors instead of a standard ValueError if certain
      malformed values were parsed (e.g. NaN or infinite values).
      Reported and fixed by @amureki (gh issue #662, gh pr #679).
    * Fixed issue in parser where a tzinfos call explicitly
      returning None would throw a ValueError. Fixed by @parsethis
      (gh issue #661, gh pr #681)
    * Fixed incorrect parsing of certain dates earlier than 100 AD
      when repesented in the form “%B.%Y.%d”, e.g.
      “December.0031.30”. (gh issue #687, pr #700)
    * Add support for ISO 8601 times with comma as the decimal
      separator in the dateutil.parser.isoparse function. (gh pr
      #721)
    * Changed handling of T24:00 to be compliant with the standard.
      T24:00 now represents midnight on the following day. Fixed by
      @cheukting (gh issue #658, gh pr #751)
    * Fixed an issue where isoparser.parse_isotime was unable to
      handle the 24:00 variant representation of midnight. (gh pr
      #773)
    * Added support for more than 6 fractional digits in isoparse.
      Reported and fixed by @jayschwa (gh issue #786, gh pr #787).
    * Added ‘z’ (lower case Z) as valid UTC time zone in isoparser.
      Reported by @cjgibson (gh issue #820). Fixed by @Cheukting
      (gh pr #822)
    * Fixed a bug with base offset changes during DST in tzfile,
      and refactored the way base offset changes are detected.
      Originally reported on StackOverflow by @MartinThoma. (gh
      issue #812, gh pr #810)
    * Fixed error condition in tz.gettz when a non-ASCII timezone
      is passed on Windows in Python 2.7. (gh issue #802, pr #861)
    * Improved performance and inspection properties of tzname
      methods. (gh pr #811)
    * Removed unnecessary binary_type compatibility shims. Added by
      @jdufresne (gh pr #817)
    * Changed python setup.py test to print an error to stderr and
      exit with 1 instead of 0. Reported and fixed by @hroncok (gh
      pr #814)
    * Added a pyproject.toml file with build requirements and an
      explicitly specified build backend. (gh issue #736, gh prs
      #746, #863)
  + Documentation changes
    * Added documentation for the rrule.rrulestr function. Fixed by
      @prdickson (gh issue #623, gh pr #762)
    * Added documentation for dateutil.tz.gettz. Fixed by
      @weatherpattern (gh issue #647, gh pr #704)
    * Add documentation for the dateutil.tz.win module and mocked
      out certain Windows-specific modules so that autodoc can
      still be run on non-Windows systems. (gh issue #442, pr #715)
    * Added changelog to documentation. (gh issue #692, gh pr #707)
    * Changed order of keywords in the rrule docstring. Reported
      and fixed by @rmahajan14 (gh issue #686, gh pr #695).
    * Improved documentation on the use of until and count
      parameters in rrule. Fixed by @lucaferocino (gh pr #755).
    * Added an example of how to use a custom parserinfo subclass
      to parse non-standard datetime formats in the examples
      documentation for parser. Added by @prdickson (gh #753)
    * Added doctest examples to tzfile documentation. Patch by
      @weatherpattern (gh pr #671)
    * Updated the documentation for relativedelta’s weekday
      arguments. Fixed by @kvn219 @huangy22 and @ElliotJH (gh pr
      #673)
    * Improved explanation of the order that relativedelta
      components are applied in. Fixed by @kvn219 @huangy22 and
      @ElliotJH (gh pr #673)
    * Expanded the description and examples in the relativedelta
      class. Contributed by @andrewcbennett (gh pr #759)
    * Improved the contributing documentation to clarify where to
      put new changelog files. Contributed by @andrewcbennett (gh
      pr #757)
    * Fixed a broken doctest in the relativedelta module. Fixed by
      @nherriot (gh pr #758).
    * Changed the default theme to sphinx_rtd_theme, and changed
      the sphinx configuration accordingly. (gh pr #707)
    * Reorganized dateutil.tz documentation and fixed issue with
      the dateutil.tz docstring. (gh pr #714)
    * Cleaned up malformed RST in the tz documentation. (gh issue
      #702, gh pr #706)
    * Corrected link syntax and updated URL to https for ISO year
      week number notation in relativedelta examples. (gh issue
      #670, pr #711)
  + Misc
    * GH #674, GH #688, GH #699, GH #720, GH #723, GH #726, GH
      #727, GH #740, GH #750, GH #760, GH #767, GH #772, GH #773,
      GH #780, GH #784, GH #785, GH #791, GH #799, GH #813, GH
      #836, GH #839, GH #857

- Update to 2.7.5 (2018-10-27)
  + Data updates
    * Update tzdata to 2018g

- Update to 2.7.4 (2018-10-24)
  + Data updates
    * Updated tzdata version to 2018f.

- Testing switched to py.test
- Add test dependencies

-------------------------------------------------------------------
Tue Dec  4 12:53:00 UTC 2018 - Matej Cepl <mcepl@suse.com>

- Remove superfluous devel dependency for noarch package

-------------------------------------------------------------------
Wed Aug 22 15:21:45 UTC 2018 - alarrosa@suse.com

- Update to version 2.7.3
  * Update tzdata to 2018e. (gh pr #710)
  * Fixed an issue where decimal.Decimal would cast `NaN` or infinite value in a
    parser.parse, which will raise decimal.Decimal-specific errors. Reported and
    fixed by @amureki (gh issue #662, gh pr #679).
  * Fixed a ValueError being thrown if tzinfos call explicity returns ``None``.
    Reported by @pganssle (gh issue #661) Fixed by @parsethis (gh pr #681)
  * Fixed incorrect parsing of certain dates earlier than 100 AD when repesented
    in the form "%B.%Y.%d", e.g. "December.0031.30". (gh issue #687, pr #700)
  * Fixed a bug where automatically generated DTSTART was naive even if a
    specified UNTIL had a time zone. Automatically generated DTSTART will now
    take on the timezone of an UNTIL date, if provided. Reported by @href (gh
    issue #652). Fixed by @absreim (gh pr #693).
  * Corrected link syntax and updated URL to https for ISO year week number
    notation in relativedelta examples. (gh issue #670, pr #711)
  * Add doctest examples to tzfile documentation. Done by @weatherpattern and
    @pganssle (gh pr #671)
  * Updated the documentation for relativedelta. Removed references to tuple
    arguments for weekday, explained effect of weekday(_, 1) and better explained
    the order of operations that relativedelta applies. Fixed by @kvn219
    @huangy22 and @ElliotJH (gh pr #673)
  * Added changelog to documentation. (gh issue #692, gh pr #707)
  * Changed order of keywords in rrule docstring. Reported and fixed by
    @rmahajan14 (gh issue #686, gh pr #695).
  * Added documentation for ``dateutil.tz.gettz``. Reported by @pganssle (gh
    issue #647). Fixed by @weatherpattern (gh pr #704)
  * Cleaned up malformed RST in the ``tz`` documentation. (gh issue #702, gh pr
    #706)
  * Changed the default theme to sphinx_rtd_theme, and changed the sphinx
    configuration to go along with that. (gh pr #707)
  * Reorganized ``dateutil.tz`` documentation and fixed issue with the
    ``dateutil.tz`` docstring. (gh pr #714)

- Update to version 2.7.2
  * Fixed an issue with the setup script running in non-UTF-8 environment.
    Reported and fixed by @gergondet (gh pr #651)

- Update to version 2.7.1
  * Updated tzdata version to 2018d.
  * Fixed issue where parser.parse would occasionally raise
    decimal.Decimal-specific error types rather than ValueError. Reported by
    @amureki (gh issue #632). Fixed by @pganssle (gh pr #636).
  * Improve error message when rrule's dtstart and until are not both naive or
    both aware. Reported and fixed by @ryanpetrello (gh issue #633, gh pr #634)

- Update to version 2.7.0
  * Dropped support for Python 2.6 (gh pr #362 by @jdufresne)
  * Dropped support for Python 3.2 (gh pr #626)
  * Updated zoneinfo file to 2018c (gh pr #616)
  * Changed licensing scheme so all new contributions are dual licensed under
    Apache 2.0 and BSD. (gh pr #542, issue #496)
  * Added __all__ variable to the root package. Reported by @tebriel
    (gh issue #406), fixed by @mariocj89 (gh pr #494)
  * Added python_requires to setup.py so that pip will distribute the right
    version of dateutil. Fixed by @jakec-github (gh issue #537, pr #552)
  * Added the utils submodule, for miscellaneous utilities.
  * Added within_delta function to utils - added by @justanr (gh issue #432,
    gh pr #437)
  * Added today function to utils (gh pr #474)
  * Added default_tzinfo function to utils (gh pr #475), solving an issue
    reported by @nealmcb (gh issue #94)
  * Added dedicated ISO 8601 parsing function isoparse (gh issue #424).
    Initial implementation by @pganssle in gh pr #489 and #622, with a
    pre-release fix by @kirit93 (gh issue #546, gh pr #573). 
  * Moved parser module into parser/_parser.py and officially deprecated the use
    of several private functions and classes from that module. (gh pr #501, #515)
  * Tweaked parser error message to include rejected string format, added by
    @pbiering (gh pr #300)
  * Add support for parsing bytesarray, reported by @uckelman (gh issue #417) and
    fixed by @uckelman and @pganssle (gh pr #514)
  * Started raising a warning when the parser finds a timezone string that it
    cannot construct a tzinfo instance for (rather than succeeding with no
    indication of an error). Reported and fixed by @jbrockmendel (gh pr #540)
  * Dropped the use of assert in the parser. Fixed by @jbrockmendel (gh pr #502)
  * Fixed to assertion logic in parser to support dates like '2015-15-May',
    reported and fixed by @jbrockmendel (gh pr #409)
  * Fixed IndexError in parser on dates with trailing colons, reported and fixed
    by @jbrockmendel (gh pr #420)
  * Fixed bug where hours were not validated, leading to improper parse. Reported
    by @heappro (gh pr #353), fixed by @jbrockmendel (gh pr #482)
  * Fixed problem parsing strings in %b-%Y-%d format. Reported and fixed by
    @jbrockmendel (gh pr #481)
  * Fixed problem parsing strings in the %d%B%y format. Reported by @asishm
    (gh issue #360), fixed by @jbrockmendel (gh pr #483)
  * Fixed problem parsing certain unambiguous strings when year <99 (gh pr #510).
    Reported by @alexwlchan (gh issue #293).
  * Fixed issue with parsing an unambiguous string representation of an ambiguous
    datetime such that if possible the correct value for fold is set. Fixes
    issue reported by @JordonPhillips and @pganssle (gh issue #318, #320,
    gh pr #517)
  * Fixed issue with improper rounding of fractional components. Reported by
    @dddmello (gh issue #427), fixed by @m-dz (gh pr #570)
  * Performance improvement to parser from removing certain min() calls. Reported
    and fixed by @jbrockmendel (gh pr #589)
  * Significantly refactored parser code by @jbrockmendel (gh prs #419, #436,
    #490, #498, #539) and @pganssle (gh prs #435, #468)
  * Implementated of __hash__ for relativedelta and weekday, reported and fixed
    by @mrigor (gh pr #389) 
  * Implemented __abs__ for relativedelta. Reported by @binnisb and @pferreir
    (gh issue #350, pr #472)
  * Fixed relativedelta.weeks property getter and setter to work for both
    negative and positive values. Reported and fixed by @souliane (gh issue #459,
    pr #460)
  * Fixed issue where passing whole number floats to the months or years
    arguments of the relativedelta constructor would lead to errors during
    addition. Reported by @arouanet (gh pr #411), fixed by @lkollar (gh pr #553)
  * Added a pre-built tz.UTC object representing UTC (gh pr #497)
  * Added a cache to tz.gettz so that by default it will return the same object
    for identical inputs. This will change the semantics of certain operations
    between datetimes constructed with tzinfo=tz.gettz(...). (gh pr #628)
  * Changed the behavior of tz.tzutc to return a singleton (gh pr #497, #504)
  * Changed the behavior of tz.tzoffset to return the same object when passed the
    same inputs, with a corresponding performance improvement (gh pr #504)
    same inputs, with a corresponding performance improvement (gh pr #504)
  * Changed the behavior of tz.tzstr to return the same object when passed the
    same inputs. (gh pr #628)
  * Added .instance alternate constructors for tz.tzoffset and tz.tzstr, to
    allow the construction of a new instance if desired. (gh pr #628)
  * Added the tz.gettz.nocache function to allow explicit retrieval of a new
    instance of the relevant tzinfo. (gh pr #628)
  * Expand definition of tz.tzlocal equality so that the local zone is allow
    equality with tzoffset and tzutc. (gh pr #598)
  * Deprecated the idiosyncratic tzstr format mentioned in several examples but
    evidently designed exclusively for dateutil, and very likely not used by
    any current users. (gh issue #595, gh pr #606)
  * Added the tz.resolve_imaginary function, which generates a real date from
    an imaginary one, if necessary. Implemented by @Cheukting (gh issue #339,
    gh pr #607)
  * Fixed issue where the tz.tzstr constructor would erroneously succeed if
    passed an invalid value for tzstr. Fixed by @pablogsal (gh issue #259,
    gh pr #581)
  * Fixed issue with tz.gettz for TZ variables that start with a colon. Reported
    and fixed by @lapointexavier (gh pr #601)
  * Added a lock to tz.tzical's cache. Reported and fixed by @Unrud (gh pr #430) 
  * Fixed an issue with fold support on certain Python 3 implementations that
    used the pre-3.6 pure Python implementation of datetime.replace, most
    notably pypy3 (gh pr #446).
  * Added support for VALUE=DATE-TIME for DTSTART in rrulestr. Reported by @potuz
    (gh issue #401) and fixed by @Unrud (gh pr #429)
  * Started enforcing that within VTIMEZONE, the VALUE parameter can only be
    omitted or DATE-TIME, per RFC 5545. Reported by @Unrud (gh pr #439)
  * Added support for TZID parameter for DTSTART in rrulestr. Reported and
    fixed by @ryanpetrello (gh issue #614, gh pr #624)
  * Added 'RRULE:' prefix to rrule strings generated by rrule.__str__, in
    compliance with the RFC. Reported by @AndrewPashkin (gh issue #86), fixed by
    @jarondl and @mlorant (gh pr #450)
  * Switched to setuptools_scm for version management, automatically calculating
    a version number from the git metadata. Reported by @jreback (gh issue #511),
    implemented by @Sulley38 (gh pr #564)
  * Switched setup.py to use find_packages, and started testing against pip
    installed versions of dateutil in CI. Fixed issue with parser import
    discovered by @jreback in pandas-dev/pandas#18141. (gh issue #507, pr #509)
  * Switched test suite to using pytest (gh pr #495)
  * Switched CI over to use tox. Fixed by @gaborbernat (gh pr #549)
  * Added a test-only dependency on freezegun. (gh pr #474)
  * Reduced number of CI builds on Appveyor. Fixed by @kirit93 (gh issue #529,
    gh pr #579)
  * Made xfails strict by default, so that an xpass is a failure. (gh pr #567)
  * Added a documentation generation stage to tox and CI. (gh pr #568)
  * Added an explicit warning when running python setup.py explaining how to run
    the test suites with pytest. Fixed by @lkollar. (gh issue #544, gh pr #548)
  * Added requirements-dev.txt for test dependency management (gh pr #499, #516)
  * Fixed code coverage metrics to account for Windows builds (gh pr #526)
  * Fixed code coverage metrics to NOT count xfails. Fixed by @gaborbernat
    (gh issue #519, gh pr #563)
  * Style improvement to zoneinfo.tzfile that was confusing to static type
    checkers. Reported and fixed by @quodlibetor (gh pr #485)
  * Several unused imports were removed by @jdufresne. (gh pr #486)
  * Switched ``isinstance(*, collections.Callable)`` to callable, which is available
    on all supported Python versions. Implemented by @jdufresne (gh pr #612)
  * Added CONTRIBUTING.md (gh pr #533)
  * Added AUTHORS.md (gh pr #542)
  * Corrected setup.py metadata to reflect author vs. maintainer, (gh issue #477,
    gh pr #538)
  * Corrected README to reflect that tests are now run in pytest. Reported and
    fixed by @m-dz (gh issue #556, gh pr #557)
  * Updated all references to RFC 2445 (iCalendar) to point to RFC 5545. Fixed
    by @mariocj89 (gh issue #543, gh pr #555)
  * Corrected parse documentation to reflect proper integer offset units,
    reported and fixed by @abrugh (gh pr #458)
  * Fixed dangling parenthesis in tzoffset documentation (gh pr #461)
  * Started including the license file in wheels. Reported and fixed by
    @jdufresne (gh pr #476)
  * Indendation fixes to parser docstring by @jbrockmendel (gh pr #492)
  * Moved many examples from the "examples" documentation into their appropriate
    module documentation pages. Fixed by @Tomasz-Kluczkowski and @jakec-github
    (gh pr #558, #561)
  * Fixed documentation so that the parser.isoparse documentation displays.
    Fixed by @alexchamberlain (gh issue #545, gh pr #560)
  * Refactored build and release sections and added setup instructions to
    CONTRIBUTING. Reported and fixed by @kynan (gh pr #562)
  * Cleaned up various dead links in the documentation. (gh pr #602, #608, #618)

-------------------------------------------------------------------
Mon Jul 10 18:55:45 UTC 2017 - aloisio@gmx.com

- Update to version 2.6.1
  * Updated zoneinfo file to 2017b. (gh pr #395)
  * Added Python 3.6 to CI testing (gh pr #365)
  * Removed duplicate test name that was preventing a test from
    being run.
  * Reported and fixed by @jdufresne (gh pr #371)
  * Fixed testing of folds and gaps, particularly on Windows (gh
    pr #392)
  * Fixed deprecated escape characters in regular expressions.
    Reported by @nascheme and @thierryba (gh issue #361), fixed by
    @thierryba (gh pr #358)
  * Many PEP8 style violations and other code smells were fixed
    by @jdufresne (gh prs #358, #363, #364, #366, #367, #368, #372,
    #374, #379, #380, #398)
  * Improved performance of tzutc and tzoffset objects. (gh pr
    #391)
  * Fixed issue with several time zone classes around DST
    transitions in any zones with +0 standard offset (e.g.
    Europe/London) (gh issue #321, pr #390)
  * Fixed issue with fuzzy parsing where tokens similar to AM/PM
    that are in the end skipped were dropped in the
    fuzzy_with_tokens list. Reported and fixed by @jbrockmendel (gh
    pr #332).
  * Fixed issue with parsing dates of the form X m YY. Reported
    by @jbrockmendel. (gh issue #333, pr #393)
  * Added support for parser weekdays with less than 3
    characters. Reported by @arcadefoam (gh issue #343), fixed by
    @jonemo (gh pr #382)
  * Fixed issue with the addition and subtraction of certain
    relativedeltas. Reported and fixed by @kootenpv (gh issue #346,
    pr #347)
  * Fixed issue where the COUNT parameter of rrules was ignored
    if 0. Fixed by @mshenfield (gh pr #330), reported by @vaultah
    (gh issue #329).
  * Updated documentation to include the new tz methods. (gh pr
    #324)
  * Update documentation to reflect that the parser can raise
    TypeError, reported and fixed by @tomchuk (gh issue #336, pr
    #337)
  * Fixed an incorrect year in a parser doctest. Fixed by
    @xlotlu (gh pr #357)
  * Moved version information into _version.py and set up the
    versions more granularly.

- Use recommended source URL format

-------------------------------------------------------------------
Sat May  6 03:31:54 UTC 2017 - toddrme2178@gmail.com

- Don't provide python2-dateutil, singlespec packages should use
  correct name.

-------------------------------------------------------------------
Tue Mar 28 17:55:07 UTC 2017 - aloisio@gmx.com

- Converted to single-spec
- Enabled tests
- Spec cleanup

-------------------------------------------------------------------
Wed Nov  9 07:56:09 UTC 2016 - tbechtold@suse.com

- Use https for Source

-------------------------------------------------------------------
Tue Nov  8 15:54:24 UTC 2016 - aloisio@gmx.com

- Update to version 2.6.0
  * Added PEP-495-compatible methods to address ambiguous and 
    imaginary dates in time zones in a backwards-compatible
    way. Ambiguous dates and times can now be safely represented
    by all dateutil time zones. Many thanks to Alexander
    Belopolski (@abalkin) and Tim Peters @tim-one for their 
    inputs on how to address this. Original issues reported by
    Yupeng and @zed (lP: 1390262, gh issues #57, #112, #249,
    #284, #286, prs #127, #225, #248, #264, #302).
  * Added new methods for working with ambiguous and imaginary 
    dates to the tz module. datetime_ambiguous() determines if
    a datetime is ambiguous for a given zone and datetime_exists()
    determines if a datetime exists in a given zone.
    This works for all fold-aware datetimes, not just those 
    provided by dateutil. (gh issue #253, gh pr #302)
  * Fixed an issue where dst() in Portugal in 1996 was 
    returning the wrong value  in tz.tzfile objects. Reported
    by @abalkin (gh issue #128,  pr #225)
  * Fixed an issue where zoneinfo.ZoneInfoFile errors were not 
    being properly deep-copied. (gh issue #226, pr #225)
  * Refactored tzwin and tzrange as a subclass of a common 
    class, tzrangebase, as there was substantial overlapping
    functionality. As part of this change, tzrange and tzstr
    now expose a transitions() function, which returns the
    DST on and off transitions for a given year. (gh issue 
    #260, pr #302)
  * Deprecated zoneinfo.gettz() due to confusion with 
    tz.gettz(), in favor of get() method of
    zoneinfo.ZoneInfoFile objects. (gh issue #11, pr #310)
  * For non-character, non-stream arguments, parser.parse now 
    raises TypeError instead of AttributeError. (gh issues
    #171, #269, pr #247)
  * Fixed an issue where tzfile objects were not properly 
    handling dst() and tzname() when attached to
    datetime.time objects. Reported by @ovacephaloid.
    (gh issue #292, pr #309)
  * /usr/share/lib/zoneinfo was added to TZPATHS for 
    compatibility with Solaris systems. Reported by @dhduvall
    (gh issue #276, pr #307)
  * tzoffset and tzrange objects now accept either a number of 
    seconds or a datetime.timedelta() object wherever
    previously only a  number of seconds was allowed.
    (gh pr #264, #277)
  * datetime.timedelta objects can now be added to 
    relativedelta objects. Reported and added by Alec Nikolas
    Reiter (@justanr) (gh issue #282, pr #283
  * Refactored relativedelta.weekday and rrule.weekday into a 
    common base class to reduce code duplication.
    (gh issue #140, pr #311)
  * An issue where the WKST parameter was improperly rendering 
    in str(rrule) was reported and fixed by Daniel LePage
    (@dplepage). (gh issue  #262, pr #263)
  * A replace() method has been added to rrule objects by 
    @jendas1, which creates new rrule with modified attributes,
    analogous to datetime.replace (gh pr #167)
  * Made some significant performance improvements to rrule 
    objects in Python 2.x (gh pr #245)
  * All classes defining equality functions now return 
    NotImplemented when  compared to unsupported classes,
    rather than raising TypeError, to allow other classes to
    provide fallback support. (gh pr #236)
  * Several classes have been marked as explicitly unhashable 
    to maintain identical behavior between Python 2 and 3.
    Submitted by Roy Williams (@rowillia) (gh pr #296)
  * Trailing whitespace in easter.py has been removed. 
    Submitted by @OmgImAlexis (gh pr #299)
  * Windows-only batch files in build scripts had line endings 
    switched to CRLF. (gh pr #237)
  * @adamchainz updated the documentation links to reflect 
    that the canonical location for readthedocs links is now
    at .io, not .org. (gh pr #272)
  * Made some changes to the CI and codecov to test against 
    newer versions of Python and pypy, and to adjust the code
    coverage  requirements. For the moment, full pypy3
    compatibility is not supported until a new release is
    available, due to upstream bugs in the old version
    affecting PEP-495 support. (gh prs #265, #266, #304, #308)
  * The full PGP signing key fingerprint was added to the 
    README.md in favor of the previously used long-id.
    Reported by @valholl (gh issue #287, pr #304)
  * Updated zoneinfo to 2016i. (gh issue #298, gh pr #306)

-------------------------------------------------------------------
Fri Mar  4 06:59:53 UTC 2016 - tbechtold@suse.com

- Fix Obsoletes. No version upgrade was done during renaming.

-------------------------------------------------------------------
Fri Feb 26 12:45:15 UTC 2016 - tbechtold@suse.com

- Rename package to python-python-dateutil . It's openSUSE policy
  to use the $pypi name with the python prefix.

-------------------------------------------------------------------
Thu Aug 13 03:13:09 UTC 2015 - Greg.Freemyer@gmail.com

- update url in specfile
- use sed to eliminate MS-DOS style end of lines

- update to version 2.4.2:
  * Updated zoneinfo to 2015b.
  * Fixed issue with parsing of tzstr on Python 2.7.x; tzstr will now
    be decoded if not a unicode type. gh #51 (lp:1331576), gh pr #55.
  * Fix a parser issue where AM and PM tokens were showing up in fuzzy
    date stamps, triggering inappropriate errors. gh #56 (lp:
    1428895), gh pr #63.
  * Missing function "setcachsize" removed from zoneinfo __all__ list
    by @ryanss, fixing an issue with wildcard imports of
    dateutil.zoneinfo. (gh pr #66).
  * (PyPi only) Fix an issue with source distributions not including
    the test suite.

- changes from version 2.4.1:
  * Added explicit check for valid hours if AM/PM is specified in
    parser. (gh pr #22, issue #21)
  * Fix bug in rrule introduced in 2.4.0 where byweekday parameter was
    not handled properly. (gh pr #35, issue #34)
  * Fix error where parser allowed some invalid dates, overwriting
    existing hours with the last 2-digit number in the string. (gh pr
    #32, issue #31)
  * Fix and add test for Python 2.x compatibility with boolean
    checking of relativedelta objects. Implemented by @nimasmi (gh pr
    #43) and Céic Krier (lp: 1035038)
  * Replaced parse() calls with explicit datetime objects in unit
    tests unrelated to parser. (gh pr #36)
  * Changed private _byxxx from sets to sorted tuples and fixed one
    currently unreachable bug in _construct_byset. (gh pr #54)
  * Additional documentation for parser (gh pr #29, #33, #41) and
    rrule.
  * Formatting fixes to documentation of rrule and README.rst.
  * Updated zoneinfo to 2015a.

- changes from version 2.4.0:
  * Fix an issue with relativedelta and freezegun (lp:1374022)
  * Fix tzinfo in windows for timezones without dst (lp:1010050, gh
    #2)
  * Ignore missing timezones in windows like in POSIX
  * Fix minimal version requirement for six (gh #6)
  * Many rrule changes and fixes by @pganssle (gh pull requests #13
    #14 #17), including defusing some infinite loops (gh #4)

- changes from version 2.3:
  * Cleanup directory structure, moved test.py to
    dateutil/tests/test.py
  * Changed many aspects of dealing with the zone info file. Instead
    of a cache, all the zones are loaded to memory, but symbolic links
    are loaded only once, so not much memory is used.
  * The package is now zip-safe, and universal-wheelable, thanks to
    changes in the handling of the zoneinfo file.
  * Fixed tzwin silently not imported on windows python2
  * New maintainer, together with new hosting: GitHub, Travis,
    Read-The-Docs

-------------------------------------------------------------------
Mon Jul 27 19:01:48 UTC 2015 - aloisio@gmx.com

- Update to version 2.2:
  * Updated zoneinfo to 2013h
  * fuzzy_with_tokens parse addon from Christopher Corley
  * Bug with LANG=C fixed by Mike Gilbert 
- Aligned requirement version with PyPI

-------------------------------------------------------------------
Thu Oct 24 11:01:02 UTC 2013 - speilicke@suse.com

- Require python-setuptools instead of distribute (upstreams merged)

-------------------------------------------------------------------
Wed Jun  6 10:11:52 UTC 2012 - cfarrell@suse.com

- license update: BSD-3-Clause
  Look at the LICENSE file

-------------------------------------------------------------------
Wed Jun  6 08:49:28 UTC 2012 - toddrme2178@gmail.com

- Added python-six requires and buildrequires.  dateutil will build
  without out, but packaged down the dependency chain will fail
  if it isn't installed

-------------------------------------------------------------------
Sun Jun  3 05:11:38 UTC 2012 - os-dev@jacraig.com

- Update to version 2.1
  * See NEWS for changes

-------------------------------------------------------------------
Fri Apr 27 14:07:19 UTC 2012 - toddrme2178@gmail.com

- Fix building python 3 package on openSUSE 11.4

-------------------------------------------------------------------
Thu Apr 26 12:11:38 UTC 2012 - toddrme2178@gmail.com

- Add python 3 package

-------------------------------------------------------------------
Tue Apr 20 12:31:46 UTC 2010 - cstender@novell.com

- updated to version 1.5
  * See NEWS for all changes and fixes

-------------------------------------------------------------------
Thu Aug 13 10:55:11 UTC 2009 - cstender@novell.com

- build as noarch

-------------------------------------------------------------------
Tue Sep  9 12:18:33 CEST 2008 - cstender@suse.de

- add python-setuptools to BuildRequire
- updated package to version 1.4.1
  o See NEWS for all changes and fixes

-------------------------------------------------------------------
Fri Oct 20 20:27:51 CEST 2006 - dgollub@suse.de

- initial version of python-dateutil (1.1)

Places

File python-python-dateutil.changes of Package python-python-dateutil (Revision 861d697cec75d949ab0a9e358c0d69c4)

Places