File raspberrypi-eeprom.changes of Package raspberrypi-eeprom
-------------------------------------------------------------------
Thu Jun 19 08:19:44 UTC 2025 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Update to 2025.05.08
-------------------------------------------------------------------
Mon Sep 9 10:41:02 UTC 2024 - Ivan Ivanov <ivan.ivanov@suse.com>
- Completely delete strings command check. Fixes (bsc#1230279)
-------------------------------------------------------------------
Tue Sep 3 12:12:53 UTC 2024 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Update to 2024.06.05
- Skipped:
* v2024.04.20-2712
* v2024.02.17-2712
* v2024.02.16-2712
* v.2024.01.05-2712
* v2023.12.06-2712
- Refresh patch:
* rpi-eeprom-update-Use-tr-instead-of-strings.patch
-------------------------------------------------------------------
Thu Nov 23 10:12:48 UTC 2023 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Update to v2023.10.30:
* Fix SDIO / WiFi clock-setup for BOOT_ORDER=0xf14
* Fix SD power-on-reset
* Firmware support for improved watchdog driver
* Update DHCP Option97 to be R,P,i,5 on Pi5
- Updates from skipped v2023.10.18:
* Add support for HAT gpiomap for improved HAT compatibility.
* Add I2C probe for DSI display auto detect
* Automatically set dtparam=nvme if booted from nvme
* Fix network boot reset issue where only the first attempt works.
* Adding pciex4_reset=0 to config.txt will leave RP1 PCIe enabled
when ARM stage is started.
* Prevent HDMI diagnostics being displayed immediately when
waking after HALT.
* Update board-name - "Raspberry Pi 5"
- Refresh patches:
* add-suse-config.patch
* rpi-eeprom-update-Use-tr-instead-of-strings.patch
-------------------------------------------------------------------
Sun Jan 29 14:42:22 UTC 2023 - Tobias Klausmann <tobias.klausmann@freenet.de>
- Refresh patch rpi-eeprom-update-Use-tr-instead-of-strings.patch
Replace the third source for "strings" as well
-------------------------------------------------------------------
Sun Jan 22 20:32:45 UTC 2023 - Tobias Klausmann <tobias.klausmann@freenet.de>
- Packaging changes:
* Compress archive to tar.xz to save space (~43M -> ~3.4M)
* Refresh rpi-eeprom-update-Use-tr-instead-of-strings.patch
- 2023-01-11-vl805-000138c0:
- Interesting changes since the last release:-
* Update VL805 to 138C0 - fix for handling of split transactions
raspberrypi/linux#5262
* Fix HID error handling with network install #458
- 2022-11-25-vl805-000138a1:
- Interesting changes since the last release:-
* Add [tryboot] conditional statement to autoboot.txt + tryboot_a_b mode
* Support custom OTP mac addresses
* Increase TFTP_MAX_BLOCK_SIZE
* Stop NVMe cleanly
* Fixes for NETCONSOLE parsing and initialisation.
* Long filename support for start_file / fixup_file.
* Secure boot and display debug info on the diagnostics screen.
- 2022-04-26-vl805-000138a1:
- Interesting changes since the last default release:
* Implement network install
* Add support for BOOT_ORDER_HTTP
* Enable the boot partition number to be specified as an EEPROM config
property.
-------------------------------------------------------------------
Tue Mar 8 12:28:21 UTC 2022 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- 2022-01-25-vl805-000138a1:
- Interesting changes since the last default release:
* Support and bug fixes for all Compute Module variants.
* NVMe interoperability fixes
* FAT/GPT fixes and file-system performance improvements.
* Added secure-boot support for industrial applications
* Added ramdisk / boot.img - for RPIBOOT and secure-boot.
- Package rpi-eeprom-digest
- Refresh patch:
* dont-use-env.patch
-------------------------------------------------------------------
Wed Jun 30 12:19:25 UTC 2021 - Ferdinand Thiessen <rpm@fthiessen.de>
- Use upstream version schema (year.month.day) instead of arbitrary 0.0
- Update to version 2021.04.29
* Add support for NVMe to the bootloader with a new NVMe boot mode
* Add support for [cm4] and [pi400] config conditionals filters.
* TFTP - reply to duplicate ACKS
* Skip rendering of HDMI diagnostics display for the first 8 seconds
unless an error occurs.
* Add support for the BCM2711 XHCI controller - BOOT_ORDER 0x5
* XHCI protocol layer fixes for non-VLI controllers
* Avoid USB MSD timeout of there is only one device
* Fix recovery.bin error handler so that the LED error pattern
is still displayed even if HDMI or SDRAM fail.
* Fix GPIO expander reset issue on some Pi4B 1.1 to 1.3 boards
* Fix regression for GPIO expander reset change which caused PMIC
reset to get card out of 1V8 mode to be missed.
* Timeout USB MSD commands and move to the next boot mode if a device
stops responding.
* Add support for booting from the BCM2711 XHCI controller which is
the USB-C socket on Pi 4B / Pi 400 and the type A sockets on Compute
Module 4 IO board.
* Validate SDRAM in recovery mode.
- Fixes bsc#1194950.
-------------------------------------------------------------------
Fri Feb 19 10:07:06 UTC 2021 - Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
- Add 'pciutils' as a requirement. 'rpi-eeprom-update' uses lspci.
(bsc#1182437)
- Update to version 0.0~2020.09.03.65~gb9c255d: Simplifies code by removing
legacy functions.
- Add patch: "rpi-eeprom-update-Use-tr-instead-of-strings.patch" to avoid the
dependency with binutils. (bsc#1182437)
-------------------------------------------------------------------
Thu Feb 4 14:17:12 UTC 2021 - Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
- Fix 'Supplements:' in spec file, as per
https://doc.opensuse.org/projects/libzypp/HEAD/zypp-modalias.html commas are
special charactes that should be replaced with '%2C'
-------------------------------------------------------------------
Thu Jan 28 16:05:58 UTC 2021 - Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
- Remove VL805 firmware version from package version as it prevents it from
incresing monotonically.
-------------------------------------------------------------------
Thu Jan 28 13:55:46 UTC 2021 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Prefix version with 0.0~
-------------------------------------------------------------------
Wed Jan 27 12:22:39 UTC 2021 - Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
- Define _firmwaredir when relevant
-------------------------------------------------------------------
Tue Jan 26 12:31:38 UTC 2021 - Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
- Update to b9c255d:
* rpi-eeprom-config: Properly decode sysfs binary files
-------------------------------------------------------------------
Mon Jan 25 18:29:06 UTC 2021 - Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
- Introduce _service file.
-------------------------------------------------------------------
Mon Jan 25 12:55:26 UTC 2021 - Jan Engelhardt <jengelh@inai.de>
- Ditch unnecessarily split package.
-------------------------------------------------------------------
Fri Jan 22 14:15:38 UTC 2021 - Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
- First commit
- Introduce patches: 'add-suse-config.patch' and 'don't-use-env.patch'.
