File yast2-ntp-client.changes of Package yast2-ntp-client
-------------------------------------------------------------------
Fri May 6 16:09:50 UTC 2016 - lslezak@suse.cz
- Fixed the default synchronization interval in the help text
(bsc#978453)
- Unify the default value in the code (the proposal client used
a different default)
- Set the initial state of the interval widget according to
the current synchronization mode (bsc#978892)
- Fixed firewall widget layout (double frame widget)
- 3.1.23
-------------------------------------------------------------------
Thu Apr 14 09:16:37 CEST 2016 - kanderssen@suse.com
- Calls to sntp adjusted to the syntax of ntp 4.2.8
(bnc#937837, bnc#916617, FATE#320392)
- 3.1.22
-------------------------------------------------------------------
Fri Nov 13 10:59:21 UTC 2015 - igonzalezsosa@suse.com
- Fix validation of AutoYaST profiles (bsc#954412)
- 3.1.21
-------------------------------------------------------------------
Thu Oct 29 12:05:53 UTC 2015 - ancor@suse.com
- Fixed an error in the "run NTP as daemon" checkbox (bsc#952144)
- 3.1.20
-------------------------------------------------------------------
Mon Aug 17 15:57:24 UTC 2015 - ancor@suse.com
- Always use a server from pool.ntp.org as default (bnc#940881)
- 3.1.19
-------------------------------------------------------------------
Fri Aug 7 12:35:42 UTC 2015 - varkoly@suse.com
- bnc#799473 - Do not use chronos.cru.fr which is is not really
freely accessible: Access policy : acces sous conditions
- 3.1.18
-------------------------------------------------------------------
Thu Aug 6 08:51:13 UTC 2015 - mvidner@suse.com
- If Install Recommended Packages is disabled during system
installation, explicitly install ntp.rpm, avoiding error pop-up
"Cannot adjust 'NTP' service" (boo#938951).
- 3.1.17
-------------------------------------------------------------------
Mon Jul 20 10:38:30 UTC 2015 - ancor@suse.com
- Calls to sntp adjusted to the syntax of ntp 4.2.8
(bnc#937837, bnc#916617)
- 3.1.16
-------------------------------------------------------------------
Fri Jun 26 11:34:00 UTC 2015 - jreidinger@suse.com
- do not crash if ntp is not installed to target system during
cloning (bnc#936178)
- 3.1.15
-------------------------------------------------------------------
Fri May 8 09:39:11 CEST 2015 - schubi@suse.de
- AutoYaST (bnc#928987):
-- Read ntp.conf again before generating autoinst.xml file
(after the ntp rpm has been installed)
-- New section "restricts"
- 3.1.14
-------------------------------------------------------------------
Thu Dec 4 09:50:34 UTC 2014 - jreidinger@suse.com
- remove X-KDE-Library from desktop file (bnc#899104)
-------------------------------------------------------------------
Tue Sep 2 10:00:18 UTC 2014 - cwh@suse.com
- Using Report.Error to be autoyast-proof
- Fixed variable replacement int gettext string;
- Added linebreaks in too long popup content (bnc#894573)
- 3.1.12
-------------------------------------------------------------------
Mon Sep 1 15:34:23 UTC 2014 - cwh@suse.com
- Aligned "Synchronize now" button and "NTP Server Address" box (bnc#893065)
- Fixed checking of return value of "sntp -s" (bnc#893094)
- 3.1.11
-------------------------------------------------------------------
Wed Aug 20 16:27:49 CEST 2014 - schubi@suse.de
- Autoyast cloning: Do not show error popup if ntp server has not
installed. (bnc#891422)
- 3.1.10
-------------------------------------------------------------------
Thu Jun 5 09:45:40 UTC 2014 - varkoly@suse.com
- bnc#881026 - YaST ntp-client: "sync without daemon" not documented in help
3.1.9
-------------------------------------------------------------------
Tue Apr 15 09:58:18 CEST 2014 - locilka@suse.com
- Fixed evaluation of starting the NTP service (bnc#872389)
- 3.1.8
-------------------------------------------------------------------
Thu Apr 3 11:52:14 UTC 2014 - jreidinger@suse.com
- change path for ntptimeset(bnc#871367)
- 3.1.7
-------------------------------------------------------------------
Tue Apr 1 11:22:41 UTC 2014 - coolo@suse.com
- adapt to new ntp service name (see bnc#871367)
- 3.1.6
-------------------------------------------------------------------
Fri Mar 28 13:31:07 UTC 2014 - vmoravec@suse.com
- Fix failing testsuite
- 3.1.5
-------------------------------------------------------------------
Thu Mar 27 14:25:29 UTC 2014 - varkoly@suse.com
- bnc#866313 - NTP in Installer: Offers remote functionality, but no network is configured
- 3.1.4
-------------------------------------------------------------------
Wed Mar 5 15:18:31 UTC 2014 - varkoly@suse.com
- bnc#863965 - NTP servers should be selected by timezone not keyboard layout
- 3.1.3
-------------------------------------------------------------------
Sat Feb 1 21:17:29 UTC 2014 - mfilka@suse.com
- bnc#861560
- adapted to new API provided by NetworkService module
- 3.1.2
-------------------------------------------------------------------
Wed Nov 6 12:47:35 UTC 2013 - lslezak@suse.cz
- log sntp output to /var/log/YaST2/sntp.log (to avoid messing
the text console in textmode installation) (bnc#847253)
- 3.1.1
-------------------------------------------------------------------
Thu Sep 19 12:09:02 UTC 2013 - lslezak@suse.cz
- do not use *.spec.in template, use *.spec file with RPM macros
instead
- 3.1.0
-------------------------------------------------------------------
Thu Aug 15 07:36:40 UTC 2013 - lslezak@suse.cz
- move the development documentation to devel-doc subpackage
- 3.0.1
-------------------------------------------------------------------
Fri Aug 2 07:04:14 UTC 2013 - lslezak@suse.cz
- convert data file from YCP to YAML format (ntp_servers.ycp ->
ntp_servers.yml)
-------------------------------------------------------------------
Wed Jul 31 08:22:59 UTC 2013 - yast-devel@opensuse.org
- converted from YCP to Ruby by YCP Killer
(https://github.com/yast/ycp-killer)
- version 3.0.0
-------------------------------------------------------------------
Mon Jul 29 11:45:52 UTC 2013 - ftake@geeko.jp
- replace NTP servers in Japan
* remove NTP servers in Fukuoka University
* add public NTP servers hosted by NICT
-------------------------------------------------------------------
Thu Jun 20 08:34:17 CEST 2013 - jsuchome@suse.cz
- remove duplicated help text (bnc#795856)
- remember value of "Save NTP Configuration" checkbox (bnc#815165)
- 2.24.0
-------------------------------------------------------------------
Fri Mar 22 13:20:47 CET 2013 - mvidner@suse.cz
- fix ntp.conf config merging: do reread the config from disk (bnc#773201)
- 2.21.3
-------------------------------------------------------------------
Wed Aug 15 08:06:07 UTC 2012 - varkoly@suse.com
- bnc#775926 - During installation ntp is not configured correctly after accessing the Change Date and Time screen
-------------------------------------------------------------------
Wed Jul 18 14:14:03 UTC 2012 - varkoly@suse.com
- bnc#771340 - Configuring NTP in YaST2 the service does not start
- bnc#753936 - yast2 ntp-client creates ntp.conf with syntax error
-------------------------------------------------------------------
Thu Mar 29 15:32:06 CEST 2012 - jsuchome@suse.cz
- merged proofread texts
-------------------------------------------------------------------
Thu Jan 5 07:26:54 UTC 2012 - varkoly@suse.com
- bnc#707408 - Additional NTP server entries for NTP client Configuration
-------------------------------------------------------------------
Wed Jan 4 12:33:27 UTC 2012 - varkoly@suse.com
- bnc#724762 - bad yast2 timezone NTP config
-------------------------------------------------------------------
Thu Sep 29 13:17:51 CEST 2011 - visnov@suse.cz
- set dialog title
- 2.21.1
-------------------------------------------------------------------
Mon Sep 12 15:41:43 UTC 2011 - lslezak@suse.cz
- updated testsuite (systemd support) (bnc#664548)
- 2.21.0
-------------------------------------------------------------------
Fri Aug 5 12:34:26 CEST 2011 - tgoettlicher@suse.de
- fixed .desktop file (bnc #681249)
-------------------------------------------------------------------
Tue Jul 5 10:18:01 UTC 2011 - varkoly@novell.com
- bnc#680764 - ntp synchronization before i can configure the source
-------------------------------------------------------------------
Fri Jun 17 12:49:42 UTC 2011 - jreidinger@novell.com
- fix button order (bnc#571961)
-------------------------------------------------------------------
Wed Feb 9 13:10:23 UTC 2011 - varkoly@novell.com
- bnc#665761 - VUL-0: default NTP configuration
Now we provide adding more ntp servers"^C
-------------------------------------------------------------------
Thu Feb 3 17:02:54 CET 2011 - mvidner@suse.cz
- Fixed one-time setting and testing by adjusting to the changed sntp
syntax (bnc#661865).
- 2.20.2
-------------------------------------------------------------------
Fri Nov 12 08:38:53 CEST 2010 - varkoly@novell.com
- bnc#650879 - Missing newline makes /etc/cron.d/novell.ntp-synchronize not work
-------------------------------------------------------------------
Wed Nov 10 15:11:04 CEST 2010 - varkoly@novell.com
- bnc#619782 Time zone configuration during initial installation.
-------------------------------------------------------------------
Thu Sep 2 11:21:09 CEST 2010 - jsuchome@suse.cz
- provide public API for info about time synchronization without
daemon running (bnc#627818)
- 2.20.0
-------------------------------------------------------------------
Thu Jun 24 06:00:41 UTC 2010 - varkoly@novell.com
- bnc#598856 - empty NTP server list on time setup
-------------------------------------------------------------------
Wed Apr 21 16:39:38 CEST 2010 - varkoly@suse.de
- Remove missleading depracated input field
-------------------------------------------------------------------
Fri Apr 9 15:24:42 UTC 2010 - varkoly@novell.com
- Initial version of time synchronization without running ntp as deamon
- NTP configuration is possible in first stage even no network is
configured.
- In the NTP proposal now it is possible to select if the NTP service
will be started as deamon or not
-------------------------------------------------------------------
Thu Apr 8 15:48:00 CEST 2010 - mvidner@suse.cz
- Added a write_only parameter to ntp-client_proposal:Write,
to fix disabling NTP without trying to sync with it (bnc#589296)
------------------------------------------------------------------
Wed Jan 13 18:56:03 CET 2010 - kmachalkova@suse.cz
- Adjusted .desktop file(s) to wrap /sbin/yast2/ calls in xdg-su
where root privileges are needed, removed X-KDE-SubstituteUID key
(bnc#540627)
-------------------------------------------------------------------
Wed Jul 8 13:30:06 CEST 2009 - ug@suse.de
- RNC file less strict
-------------------------------------------------------------------
Tue Jun 16 14:27:45 CEST 2009 - mvidner@suse.cz
- Using autodocs-ycp.ami, which contains a fix for automake 1.11.
-------------------------------------------------------------------
Tue Mar 31 16:52:04 CEST 2009 - mvidner@suse.cz
- Moved more code dealing with NTP setup from yast2-country
to yast2-ntp-client to make the API less fragile (bnc#483787).
- 2.18.0
-------------------------------------------------------------------
Tue Mar 17 14:01:57 CET 2009 - mvidner@suse.cz
- Do not pop up with questions in CLI mode (bnc#456553).
-------------------------------------------------------------------
Fri Feb 20 12:39:15 CET 2009 - mvidner@suse.cz
- Fixed: the checkbox for opening/closing the firewall port would
have no effect (bnc#476951). Same problem, different reason.
- 2.17.14
-------------------------------------------------------------------
Fri Jan 23 14:32:10 CET 2009 - mvidner@suse.cz
- Fixed: the checkbox for opening/closing the firewall port would
have no effect (bnc#468405).
- 2.17.13
-------------------------------------------------------------------
Mon Jan 19 14:45:26 CET 2009 - mvidner@suse.cz
- Use the iburst option also for the server added during the
installation, to make the initial sync work even if the
time slew is too big (bnc#450418).
- 2.17.12
-------------------------------------------------------------------
Fri Jan 9 14:10:47 CET 2009 - mvidner@suse.cz
- Removed a server reported nonfunctional (bnc#458917).
- Offer CC.pool.ntp.org for countries that do not have any other
server (bnc#458917 c4).
- 2.17.11
-------------------------------------------------------------------
Fri Dec 12 16:00:50 CET 2008 - mvidner@suse.cz
- Due to yesterday's change, the Configure button at install time
would access settings that would be ignored. Removed it.
(bnc#449615 c15)
- Reduced spacing in new server dialog to make it fit 80x24
(bnc#458459).
- 2.17.10
-------------------------------------------------------------------
Thu Dec 11 14:41:45 CET 2008 - mvidner@suse.cz
- At install time, do not overwrite the original ntp.conf but add our
changes instead. Specifically netconfig needs the key config
preserved (bnc#449615).
- 2.17.9
-------------------------------------------------------------------
Mon Dec 8 13:42:09 CET 2008 - kmachalkova@suse.cz
- Missing strings marked for translation (bnc#446967, bnc#446969)
-------------------------------------------------------------------
Thu Dec 4 14:49:50 CET 2008 - kmachalkova@suse.cz
- If NETCONFIG_NTP_POLICY value can't be read (e.g. in inst-sys),
set it to 'auto' as safe default (bnc#449362)
- 2.17.8
-------------------------------------------------------------------
Thu Nov 13 16:25:33 CET 2008 - ug@suse.de
- rnc file fixed
-------------------------------------------------------------------
Fri Nov 7 13:54:27 CET 2008 - mvidner@suse.cz
- Set a 15s timeout on one-time synchronization (bnc#442287).
- 2.17.7
-------------------------------------------------------------------
Thu Nov 6 18:31:20 CET 2008 - mvidner@suse.cz
- Adjusted dialog buttons according to YaST Style Guide
(bnc#440532).
- 2.17.6
-------------------------------------------------------------------
Tue Oct 28 15:47:41 CET 2008 - varkoly@suse.de
- (bnc#438704) – ntp server do not work
- 2.17.5
-------------------------------------------------------------------
Wed Oct 15 13:24:52 CEST 2008 - mvidner@suse.cz
- Use sntp instead of ntpdate which is obsolete (bnc#431516).
- 2.17.4
-------------------------------------------------------------------
Sun Oct 12 21:54:08 CEST 2008 - mvidner@suse.cz
- Removed a check that was too expensive and made potential failures
silent (bnc#428026).
- 2.17.3
-------------------------------------------------------------------
Mon Sep 29 15:13:54 CEST 2008 - visnov@suse.cz
- avoid reading configuration during install (bnc #427712)
- 2.17.2
-------------------------------------------------------------------
Mon Aug 18 12:26:19 CEST 2008 - mvidner@suse.cz
- Applied Netconfig patch for fine-grained merging of static and
DHCP-supplied data (thanks to Michael Calmer)
- ntp-client_proposal: do not propose new configuration when some
already exists; Write: get server name from argument before
checking UI
- 2.17.1
-------------------------------------------------------------------
Fri Jun 13 12:35:00 CEST 2008 - mvidner@suse.cz
- yast2-slp is already present during the installation, so don't ask
to install it when the user chooses Local NTP Server / Lookup
(bnc#399659).
- Do not leave ntpd running if it was not running before pressing Test.
- 2.17.0
-------------------------------------------------------------------
Fri May 16 16:40:22 CEST 2008 - jsrain@suse.cz
- added categories Settings and System into desktop file
(bnc #382778)
-------------------------------------------------------------------
Tue May 13 13:36:47 CEST 2008 - mvidner@suse.cz
- Fixed breakage caused by last change ("Command line specification
maps undefined option 'initial' for action 'add'", bnc#387717)
- 2.16.9
-------------------------------------------------------------------
Wed Apr 30 14:16:39 CEST 2008 - mvidner@suse.cz
- /etc/sysconfig/ntp:NTPD_INITIAL_NTPDATE was removed and assumes AUTO
now. Removed the UI related to it, but keet CLI and AutoYaST options
for compatibility (bnc#381838).
- Avoid "UI syntax error" when Write is called from the timezone
module (bnc#384715).
- 2.16.8
-------------------------------------------------------------------
Wed Apr 16 10:45:26 CEST 2008 - mvidner@suse.cz
- Merged proofread texts.
-------------------------------------------------------------------
Fri Apr 11 10:47:33 CEST 2008 - mvidner@suse.cz
- Suggest ntp.$domain as the local server (fate#302863).
- 2.16.7
-------------------------------------------------------------------
Wed Apr 9 13:38:32 CEST 2008 - mvidner@suse.cz
- Read the whole configuration of NTP (not only ntp.conf
but also e.g. firewall) on running system to initialize
everything correctly; do not re-read ntp.confif it has been read
already (bnc#375877)
-------------------------------------------------------------------
Fri Apr 4 16:17:14 CEST 2008 - jsuchome@suse.cz
- ntp-client_proposal: UI adapted for fate#302917 (distinguish
between one-time synchronization and saving the client config)
- 2.16.6
-------------------------------------------------------------------
Thu Apr 3 17:30:40 CEST 2008 - kmachalkova@suse.cz
- Display popup with icon if NTP test succeeds (bnc#306018)
- Require and install ntp packages (instead of obsoleted xntp),
correct documentation (bnc#372417)
- 2.16.5
-------------------------------------------------------------------
Mon Mar 17 12:43:32 CET 2008 - jsrain@suse.cz
- added 'StartupNotify=true' to the desktop file (bnc #304964)
-------------------------------------------------------------------
Wed Feb 20 19:28:18 CET 2008 - kmachalkova@suse.cz
- Added yast2-country-data into BuildRequires
-------------------------------------------------------------------
Tue Feb 19 17:51:21 CET 2008 - kmachalkova@suse.cz
- Improved NTP service start wording (now & on boot vs. manually)
(bnc#345340)
- Improved NTP installation proposal layout (bnc#359209)
- Depend on lightweight yast2-country-data instead of yast2-country
- ntp-client_proposal made smarter (FaTE#302917)
- 2.16.4
-------------------------------------------------------------------
Thu Jan 24 15:48:51 CET 2008 - mzugec@suse.cz
- replace deprecated NetworkDevices by NetworkInterfaces (from yast2)
- 2.16.3
-------------------------------------------------------------------
Mon Jan 7 12:02:51 CET 2008 - kmachalkova@suse.cz
- Merged proofread texts
-------------------------------------------------------------------
Tue Nov 20 15:49:59 CET 2007 - kmachalkova@suse.cz
- Repository scanning (Package::Available()) definitely removed
(#327336)
- Updated help text referring to xntp documentation (#340867)
- 2.16.2
-------------------------------------------------------------------
Wed Oct 31 13:53:04 CET 2007 - kmachalkova@suse.cz
- Prompt for installing xntp package (CheckAndInstallPackages) on
running system, do not scan repositories (Package::Available())
(#327336)
- 2.16.1
-------------------------------------------------------------------
Wed Oct 3 18:44:06 CEST 2007 - kmachalkova@suse.cz
- Added visual progress feedback for running ntpdate in installation
proposal (#328469)
- Hide read/write progress in installation (#327066)
- Do not check for availability of xntp package (thus, update all
the repos) if it is already installed (#327336)
- 2.16.0
-------------------------------------------------------------------
Fri Sep 21 11:33:24 CEST 2007 - locilka@suse.cz
- When user selects to use NTP during installation, trigger also
yast2-ntp-client RPM for installation (#327050).
- 2.15.12
-------------------------------------------------------------------
Thu Sep 20 18:11:22 CEST 2007 - kmachalkova@suse.cz
- Do not write NTP configuration at the end of 1st stage of
installation if it hasn't been modified (#326338)
- Set write_only mode at the end of 1st stage, do not start NTP
service (#326478 related)
- 2.15.11
-------------------------------------------------------------------
Thu Sep 13 17:50:19 CEST 2007 - kmachalkova@suse.cz
- In installation proposal, remember whether synchronization with
NTP server has been selected (#308238)
- Set AbortFunction back to 'nil' after NtpClient::Read has been
called to prevent segfault after multiple calls (#294773)
- 2.15.10
-------------------------------------------------------------------
Thu Sep 6 18:51:37 CEST 2007 - kmachalkova@suse.cz
- Accept IP as a valid NTP server address (#308265)
- Use Packages::addAdditionalPackage() for marking xntp package for
installation so that it is not discarded later on (#307363)
- Correct fix for not re-reading NTP configuration when calling
ntp-client from outside (no exception for the 1st stage)
- 2.15.9
-------------------------------------------------------------------
Mon Sep 3 17:01:12 CEST 2007 - kmachalkova@suse.cz
- Fixed adding new NTP servers when calling ntp-client from outside
(e.g. timezone) - do not re-read the configuration if it has been
already read
- Use error popup (Report::Error) if NTP test fails (#306018)
- Display 'ntpd started on boot' warning message only if we don't
use NM and/or no network device is started at boot time (#299666)
- Do not query status/stop/start NTP service during installation
(holds for NTP test and ntp proposal client)
- Replace 'Finish' button with 'Accept' button in installation
proposal
- 2.15.8
-------------------------------------------------------------------
Fri Aug 31 17:04:37 CEST 2007 - kmachalkova@suse.cz
- Move all installation-related functionality into separate inst.
clients (_proposal and _finish) (FaTE #302192)
- Do not check for xntp package during installation (#299557, #299238)
- Call 'ntpdate' to synchronize with NTP server during installation
(do not restart the service) (#299238)
- 'During boot' NTP service start is now default (#302389)
- 2.15.7
-------------------------------------------------------------------
Mon Aug 6 16:04:39 CEST 2007 - kmachalkova@suse.cz
- Do not allow to edit access control rules if NTP is configured
via DHCP (DHCP may servers distribute their own rule set)
- Added help texts (FaTE #120109)
- 2.15.6
-------------------------------------------------------------------
Fri Jul 27 16:00:59 CEST 2007 - kmachalkova@suse.cz
- Added functionality to restrict NTP service to selected servers
only and to modify access control flags for individual servers
(FaTE #120109)
- 2.15.5
-------------------------------------------------------------------
Thu Jul 26 17:16:41 CEST 2007 - kmachalkova@suse.cz
- UI redesign: advanced configuration dialog splitted into 'General'
and 'Security' settings tab
- New GetNtpServersByCountry function - to be used by yast2-timezone
(FaTE #302192)
- 2.15.4
-------------------------------------------------------------------
Fri Apr 13 16:42:50 CEST 2007 - kmachalkova@suse.cz
- Use 'ntpdate -q' (query only) when testing if ntp server is accesible,
do not hard-set the time
- Updated list of public ntp servers
- 2.15.3
-------------------------------------------------------------------
Mon Mar 12 12:01:39 CET 2007 - kmachalkova@suse.cz
- Removed dependency on yast2-slp - install yast2-slp package only
when needed (scan for local NTP servers)
- 2.15.2
-------------------------------------------------------------------
Tue Feb 6 11:09:08 CET 2007 - kmachalkova@suse.cz
- Merged 'Great Britain' and 'UK' public ntp server lists (#241054)
- 2.15.1
-------------------------------------------------------------------
Mon Jan 22 11:09:09 CET 2007 - kmachalkova@suse.cz
- Correct handling of switching between simple and advanced config
(display current server entries in server table) (#230240)
- Updated obsolete help text
- 2.15.0
-------------------------------------------------------------------
Fri Nov 10 18:04:03 CET 2006 - kmachalkova@suse.cz
- Don't forget to store type of ntp record (simple config -> server)
(#216456)
- 2.14.2
-------------------------------------------------------------------
Mon Nov 6 14:16:06 CET 2006 - kmachalkova@suse.cz
- Set ActiveDirectory DC as a default time server when called from
samba-client
- 2.14.1
-------------------------------------------------------------------
Mon Oct 30 09:45:30 CET 2006 - kmachalkova@suse.cz
- Improved Autoyast profile validation (ntpclient.rnc moved from
autoyast package (#215248)
- Always set NTP_INITIAL_NTPDATE to AUTO if ntp.conf is modified
via DHCP
- 2.14.0
-------------------------------------------------------------------
Wed Aug 2 17:15:43 CEST 2006 - locilka@suse.cz
- Complex configuration renamed to Advanced configuration (#179476)
-------------------------------------------------------------------
Tue Jul 18 15:05:25 CEST 2006 - locilka@suse.cz
- NTP Client renamed to NTP Configuration because one can also
configure an NTP Server here (#173411).
- 2.13.12
-------------------------------------------------------------------
Mon May 22 16:12:12 CEST 2006 - locilka@suse.cz
- When switchich to the complex configuration or saving the simple
configuration, current server was allways re-added with
initial_sync==true even if there was no reason to change
the current value of initial_sync (#177575).
- Remember all servers correctly when random pool servers are
selected (#177570).
- 2.13.11
-------------------------------------------------------------------
Thu May 18 09:26:20 CEST 2006 - locilka@suse.cz
- Do not report the empty server address when switching to the
Complex configuration (#176581).
- Fixed behavior when switching to the complex configuration with
no server address defined before. Sometimes it deleted the local
clock entry.
- 2.13.10
-------------------------------------------------------------------
Thu May 11 15:28:30 CEST 2006 - locilka@suse.cz
- Adjusting ntp_conf rw agent to be able to understand additional
comments on the same line where are already some entries written
(#172589).
- 2.13.9
-------------------------------------------------------------------
Wed Apr 26 09:17:00 CEST 2006 - locilka@suse.cz
- Check and store the changed address record when switching from
the simple to the complex configuration (#169206).
- 2.13.8
-------------------------------------------------------------------
Thu Apr 13 16:02:25 CEST 2006 - locilka@suse.cz
- Leaving the 'initial_sync' and 'options' for pool.ntp.org feature
without change when user has previously changed them (#165852).
- 2.13.7
-------------------------------------------------------------------
Tue Apr 11 11:53:06 CEST 2006 - locilka@suse.cz
- Switching from simple to complex configuration was eating server
entries (#165149).
- 2.13.6
-------------------------------------------------------------------
Thu Mar 23 08:45:37 CET 2006 - locilka@suse.cz
- Added checking for root permissions into the module startup
process (#158483)
- 2.13.5
-------------------------------------------------------------------
Mon Mar 13 09:31:30 CET 2006 - locilka@suse.cz
- fixed bug #155325, problems with widgets around random pool
servers feature
- 2.13.4
-------------------------------------------------------------------
Fri Mar 10 10:56:22 CET 2006 - locilka@suse.cz
- merged texts from proofread
- 2.14.3
-------------------------------------------------------------------
Mon Mar 6 18:44:03 CET 2006 - locilk@suse.cz
- Adjusted BuildRequires for package
- 2.14.2
-------------------------------------------------------------------
Fri Jan 27 09:15:00 CET 2006 - locilka@suse.cz
- merged texts from proofread
-------------------------------------------------------------------
Mon Dec 19 13:40:23 CET 2005 - jsuchome@suse.cz
- merged texts from proofread
- 2.13.1
-------------------------------------------------------------------
Thu Nov 3 08:53:46 CET 2005 - locilka@suse.cz
- Added enhancement #114268
Selection of public servers newly contains
$country_shortname.pool.ntp.org for every state known for YaST.
- Added enhancement #105300
New checkbox for adding 3 'random' servers from pool.ntp.org
which adds [0|1|2].pool.ntp.org servers. These servers names
change their IP (and physical destination) every hour.
- Generated and tested new set of public NTP servers.
- Fixed scropt for generating set of public servers not to contain
HTML tags in server name and location.
- 2.13.0
-------------------------------------------------------------------
Tue Aug 16 14:31:27 CEST 2005 - locilka@suse.cz
- Fixed bug #104907
Server selected from one of found with the Lookup function had
been returned as the string "server".
- Fixed bug #104906
Now it is possible to save the configuration when
start ntp: "never" is selected and no server has been choosen.
- 2.12.6
-------------------------------------------------------------------
Tue Aug 16 11:50:17 CEST 2005 - locilka@suse.cz
- Merged proofread texts
-------------------------------------------------------------------
Fri Aug 12 13:53:26 CEST 2005 - locilka@suse.cz
- ComboBox for selecting a public NTP server has at least 40
characters. Helpful for ncurses. Bug #97184
- 2.12.5
-------------------------------------------------------------------
Tue Aug 9 15:42:06 CEST 2005 - locilka@suse.cz
- Fixing bug #102993
NTP server textentry is not checked when switching to the complex
configuration
- 2.12.4
-------------------------------------------------------------------
Wed Aug 3 14:52:56 CEST 2005 - locilka@suse.cz
- Changed the last "xntpd" to "ntp"
- Changed SCR agent for xntpd to ntp
- Changed sysconfig variables XNTPD to NTPD
- Fixed testsuites
- Changed sysconfig/network/dhcp.DHCLIENT_MODIFY_NTPD_CONF to the
DHCLIENT_MODIFY_NTP_CONF
- Fixed a typo in help
- Fixed testsuites (xntp -> ntp)
- 2.12.3
-------------------------------------------------------------------
Thu Jul 28 11:26:40 CEST 2005 - locilka@suse.cz
- Changed service name "xntpd" to "ntp"
- Updated .desktop file
- 2.12.2
-------------------------------------------------------------------
Tue Jul 19 10:32:09 CEST 2005 - locilka@suse.cz
- Fixing some help texts to match exactly the dialog widget names
- Fixing complains in y2log about converting 'true' to integer
during Radio Clock symlink configuration
-------------------------------------------------------------------
Thu May 19 12:26:25 CEST 2005 - locilka@suse.cz
- Fixing "Save and Restart" function not to produce Progress errors
- Changing labels, headlines, names. Major changes:
Broadcast -> Outgoing Broadcast
Accepting Broadcasts -> Incoming Broadcast
- Replacing "Select NTP Server" dialog with two popups:
"Select Local NTP Server" and "Select Public NTP Server"
- Changing texts to be YaST2 Style Guide Compatible
- 2.12.1
-------------------------------------------------------------------
Tue May 17 13:14:01 CEST 2005 - locilka@suse.cz
- Fixing bug #83918
NTP Client could freeze during saving the configuration when the
starting directory of YaST2 ntp-client was a network directory
and the "Configure via DHCP" option has been unselected.
-------------------------------------------------------------------
Wed May 11 12:33:39 CEST 2005 - locilka@suse.cz
- NTP Server entry-checking is ommited when changing the dialog to
select one from already found or public ones
- Caching Lookup-Servers results
-------------------------------------------------------------------
Mon May 9 15:18:59 CEST 2005 - locilka@suse.cz
- Added "Scanning nework" popup which appears during scanning the
local network for NTP servers
- Added error popups when no servers are found (popup text depends
on whether SuSEfirewall2 is running)
- Added some missing comments for translators
- 2.12.0
-------------------------------------------------------------------
Thu Mar 31 14:23:34 CEST 2005 - locilka@suse.cz
- Fixed bug #74376
Checking server/peer address entry for existency and rightness
-------------------------------------------------------------------
Wed Mar 16 15:51:15 CET 2005 - locilka@suse.cz
- Fixed bug #73039
Firewall configuration had never been saved
- Changing maintainer -> locilka
- 2.11.3
-------------------------------------------------------------------
Mon Feb 14 12:29:46 CET 2005 - jsrain@suse.cz
- do not ask to confirm abort if nothing changed (#50743)
- 2.11.2
-------------------------------------------------------------------
Wed Dec 15 14:38:09 CET 2004 - jsrain@suse.cz
- clean-up of neededforbuild and requires
- using generic firewall enabling widget/popup
- using Progress::set
- 2.11.1
-------------------------------------------------------------------
Tue Nov 2 11:38:57 CET 2004 - jsrain@suse.cz
- adapted to new Mode.ycp interface
- 2.11.0
-------------------------------------------------------------------
Tue Oct 19 14:34:08 CEST 2004 - jsrain@suse.cz
- using unified messages from Message.ycp/Confirm.ycp/Label.ycp
-------------------------------------------------------------------
Fri Sep 17 10:20:51 CEST 2004 - jsrain@suse.cz
- added NTP servers located at "Physikalisch-Technische
Bundesanstalt" to the list of NTP servers (#45409)
- 2.10.8
-------------------------------------------------------------------
Tue Sep 14 08:24:14 CEST 2004 - jsrain@suse.cz
- adapted testsuite to changes in yast2-firewall
- 2.10.7
-------------------------------------------------------------------
Mon Sep 6 16:15:38 CEST 2004 - jsrain@suse.cz
- fixed using NTP server detected via SLP
- 2.10.6
-------------------------------------------------------------------
Fri Sep 3 14:18:08 CEST 2004 - jsrain@suse.cz
- added GerModified and SetModified functions to _auto client
-------------------------------------------------------------------
Mon Aug 30 13:08:37 CEST 2004 - jsrain@suse.cz
- removed duplicated ntp_servers.ycp file
- 2.10.5
-------------------------------------------------------------------
Mon Aug 23 10:31:56 CEST 2004 - locilka@suse.cz
- added missing data: ntp_servers
- 2.10.4
-------------------------------------------------------------------
Thu Aug 19 16:31:25 CEST 2004 - visnov@suse.cz
- fixed command line return type
- 2.10.3
-------------------------------------------------------------------
Mon Aug 16 08:25:14 CEST 2004 - jsrain@suse.cz
- fixed firewall port identification
- 2.10.2
-------------------------------------------------------------------
Tue Aug 10 09:36:19 CEST 2004 - jsrain@suse.cz
- merged texts from proofread
-------------------------------------------------------------------
Mon Aug 9 12:07:05 CEST 2004 - jsrain@suse.cz
- adapted to the new firewall interface
- updated to changes in CWM
- split the UI and backend (the border wasn't clear)
- 2.10.1
-------------------------------------------------------------------
Tue Aug 3 15:57:42 CEST 2004 - jsrain@suse.cz
- updated helps
- updated comments to functions and texts fro translations
- other updates
-------------------------------------------------------------------
Fri Jul 30 15:42:18 CEST 2004 - jsrain@suse.cz
- UI updates
-------------------------------------------------------------------
Thu Jul 29 09:48:11 CEST 2004 - jsrain@suse.cz
- added a list of NTP servers and offering to select one of them
- added support for configuring via DHCP
- 2.10.0
-------------------------------------------------------------------
Mon Jul 19 12:36:29 CEST 2004 - jsrain@suse.cz
- use common function for checking installed packages (#30872)
-------------------------------------------------------------------
Mon Jun 21 07:55:25 CEST 2004 - jsrain@suse.cz
- fixed saving of options to /etc/ntp.conf (#42199)
-------------------------------------------------------------------
Sun May 30 05:15:03 CEST 2004 - nashif@suse.de
- Honor old syntax when importing (#41379)
- 2.9.13
-------------------------------------------------------------------
Fri May 21 08:13:20 CEST 2004 - jsrain@suse.cz
- dont complain about missing packages when cloning (nashif)
- 2.9.12
-------------------------------------------------------------------
Tue May 4 09:04:19 CEST 2004 - jsrain@suse.cz
- merged texts from proofread
- 2.9.11
-------------------------------------------------------------------
Thu Apr 8 14:30:30 CEST 2004 - jsrain@suse.cz
- fixed texts of menu button in the log display dialog (#38522)
-------------------------------------------------------------------
Fri Apr 2 16:08:30 CEST 2004 - jsrain@suse.de
- changed version to GPL
- 2.9.10
-------------------------------------------------------------------
Tue Mar 30 08:31:54 CEST 2004 - jsrain@suse.de
- fixed typo in variable name
- 2.9.9
-------------------------------------------------------------------
Fri Mar 26 14:36:57 CET 2004 - jsrain@suse.de
- added missing textdomain, added missing comments for translators
-------------------------------------------------------------------
Mon Mar 15 11:28:36 CET 2004 - jsrain@suse.cz
- fixed parsing of configuration files with comments on the same
line as option (eg. server ntp.example.com #comment) (#35818)
- fixed saving address of the NTP server from the simple dialog
- added support for lookup NTP servers via SLP
- reduced VSpacings in order to fit in new wizard
- not asking for confirmation when set NTP service on if at least
one network interface started on boot found (#35487)
- fixed handling of `abort event
- 2.9.8
-------------------------------------------------------------------
Wed Mar 10 02:20:52 CET 2004 - sh@suse.de
- V 2.9.7
- Migration to new wizard
-------------------------------------------------------------------
Tue Mar 9 09:34:23 CET 2004 - jsrain@suse.de
- Require -> Package
- using Sequencer module
-------------------------------------------------------------------
Mon Mar 8 18:12:02 CET 2004 - jsrain@suse.de
- setting icon
- 2.9.6
-------------------------------------------------------------------
Fri Mar 5 15:15:32 CET 2004 - jsrain@suse.de
- types fixes
- 2.9.5
-------------------------------------------------------------------
Wed Mar 3 12:49:15 CET 2004 - jsrain@suse.de
- fixed testsuite
- 2.9.4
-------------------------------------------------------------------
Mon Mar 1 16:38:57 CET 2004 - jsrain@suse.de
- fixed displaying NTP summary
- merged texts from proofread
- more strict data types
- 2.9.3
-------------------------------------------------------------------
Mon Feb 16 17:37:37 CET 2004 - jsrain@suse.de
- syntax fix of abort checking (in order to build)
- 2.9.2
-------------------------------------------------------------------
Tue Feb 10 08:19:59 CET 2004 - jsrain@suse.de
- dropped .y2cc file
- 2.9.1
-------------------------------------------------------------------
Thu Jan 22 17:37:58 CET 2004 - jsrain@suse.de
- added displaying of NTP daemon's log
- added firewall settin support
- 2.9.0
-------------------------------------------------------------------
Wed Jan 21 17:28:47 CET 2004 - jsrain@suse.de
- updated for the new interpreter
- added support for command line interface
-------------------------------------------------------------------
Thu Sep 25 10:05:18 CEST 2003 - jsrain@suse.de
- typos fixed (#30274)
-------------------------------------------------------------------
Thu Sep 11 06:56:31 CEST 2003 - nashif@suse.de
- #30291: return list of required packages for autoinstallation
-------------------------------------------------------------------
Wed Sep 10 10:27:35 CEST 2003 - jsrain@suse.de
- stopping XNTP daemon when set to never start it automatically
(30358)
- 2.8.9
-------------------------------------------------------------------
Fri Sep 5 08:30:16 CEST 2003 - jsrain@suse.de
- merged texts from proofread
- 2.8.8
-------------------------------------------------------------------
Tue Sep 2 11:29:07 CEST 2003 - jsrain@suse.de
- marked missed texts for translation
- fixed translation of exit without saving popup (was evaluated in
incorect textdomain)
-------------------------------------------------------------------
Mon Sep 1 11:35:25 CEST 2003 - jsrain@suse.de
- separated "Type of entry to add" popup to extra dialog and added
some help to the entries (#29669)
- 2.8.7
-------------------------------------------------------------------
Fri Aug 29 13:13:26 CEST 2003 - jsrain@suse.de
- improved helps (#29379)
- displaying correctly local CMOS clock (#29422)
- 2.8.6
-------------------------------------------------------------------
Mon Aug 25 17:33:19 CEST 2003 - jsrain@suse.de
- not touching sysconfig/xntp:XNTPD_INITIAL_NTPDATE if containg
AUTO and would be replaced with empty string (#29315)
- 2.8.5
-------------------------------------------------------------------
Wed Aug 20 15:18:40 CEST 2003 - jsuchome@suse.de
- removed redundant "initialization dialog" (#28779)
- 2.8.4
-------------------------------------------------------------------
Mon Aug 11 09:43:03 CEST 2003 - jsrain@suse.de
- merged text from proofread
- 2.8.3
-------------------------------------------------------------------
Wed Aug 6 13:52:54 CEST 2003 - jsrain@suse.de
- fixed Abort button handling
-------------------------------------------------------------------
Wed Aug 6 08:48:57 CEST 2003 - jsrain@suse.de
- changed internal structure (autoyast requirement)
- reporting error if xntp package installation fails
- handling double-click in the summary table
- 2.8.2
-------------------------------------------------------------------
Tue Aug 5 15:46:20 CEST 2003 - jsrain@suse.de
- added warning if NTP daemon set to be started at boot
- added more testsuites
- added some documentation
-------------------------------------------------------------------
Mon Aug 4 14:42:15 CEST 2003 - jsrain@suse.de
- added .desktop file
- 2.8.1
-------------------------------------------------------------------
Wed Jul 30 07:56:30 CEST 2003 - jsrain@suse.de
- not (re)starting service during autoinstallation
-------------------------------------------------------------------
Tue Jul 29 14:52:50 CEST 2003 - jsrain@suse.de
- adapted to udpated CWM interface
-------------------------------------------------------------------
Mon Jul 7 16:11:29 CEST 2003 - jsrain@suse.de
- initial version
