File yast2-vm.changes of Package yast2-vm
-------------------------------------------------------------------
Wed Jun 18 08:29:15 MDT 2014 - carnold@suse.com
- Include enable and start of libvirtd service for s390x
- Remove installing the pm-utils package. It is no longer needed
- Restart apparmor before starting libvirtd. Otherwise libvirtd
runs unenforced at the first start.
- 3.1.13
-------------------------------------------------------------------
Wed May 28 10:30:33 MDT 2014 - carnold@suse.com
- bnc#877715 - SLES12_LOC : ALL_LANGS:the dialog Untranslated text
in 'Install Hypervisor and Tools' screen
- 3.1.12
-------------------------------------------------------------------
Fri May 23 10:01:44 MDT 2014 - carnold@suse.com
- bnc#879463 - Yast2 VM: network bridge is not created
- 3.1.11
-------------------------------------------------------------------
Thu May 22 11:36:51 UTC 2014 - jreidinger@suse.com
- Fix passed kernel flavor (bnc#878909)
- 3.1.10
-------------------------------------------------------------------
Wed May 14 15:57:31 UTC 2014 - jreidinger@suse.com
- adapt to new yast2-bootloader API(bnc#869608)
- 3.1.9
-------------------------------------------------------------------
Wed May 14 08:35:01 MDT 2014 - carnold@suse.com
- Install libvirt-daemon-config-network with the LXC pattern
- Fix package lists for openSUSE installation
- 3.1.8
-------------------------------------------------------------------
Wed Apr 23 15:29:15 MDT 2014 - carnold@suse.com
- bnc#874633 - yast2 virtualization fails to configure bridge
- bnc#874426 - One of the notice window is empty after launching
"Install Hypervisor and Tools" in Yast2
- 3.1.7
-------------------------------------------------------------------
Wed Apr 2 16:13:41 MDT 2014 - carnold@suse.com
- bnc#871633 - yast2 virtualization fails to install xen pattern
- Print correct message at end of install depending on what was
selected
- Adjust alignment and spacing of main dialog
- Cleanup whitespace in code
- 3.1.6
-------------------------------------------------------------------
Wed Mar 12 15:49:26 CET 2014 - aginies@suse.com
- use patterns instead of packages list (SLES and openSUSE)
- add LXC
- improve GUI
- add some information about what will be installed
- 3.1.5
-------------------------------------------------------------------
Fri Mar 7 17:01:44 MST 2014 - carnold@suse.com
- The xend portion of the relocation server code is not applicable
to the libxl toolstack. Rework for libxl compatibility.
- 3.1.4
-------------------------------------------------------------------
Tue Mar 4 11:44:24 MST 2014 - carnold@suse.com
- Enable and start libvirtd. This is required for both KVM and Xen.
- 3.1.3
-------------------------------------------------------------------
Fri Feb 21 10:58:53 MST 2014 - carnold@suse.com
- kvm is deprecated. Use qemu-kvm.
- After installing KVM, you no longer need to reboot the host.
Change the message dialog appropriately to reflect this.
- 3.1.2
-------------------------------------------------------------------
Thu Oct 31 11:31:25 MDT 2013 - carnold@suse.com
- The spec file needs to handle the COPYING file.
- 3.1.1
-------------------------------------------------------------------
Thu Sep 19 17:47:10 UTC 2013 - lslezak@suse.cz
- do not use *.spec.in template, use *.spec file with RPM macros
instead
- 3.1.0
-------------------------------------------------------------------
Thu Aug 22 08:43:29 CEST 2013 - jsuchome@suse.cz
- use OSRelease instead of reading obsolete /etc/SuSE-release
(bnc#833955)
- 3.0.2
-------------------------------------------------------------------
Wed Aug 19 16:50:53 UTC 2013 - yast-devel@opensuse.org
- Various build cleanups not related to actual code execution
- version 3.0.1
-------------------------------------------------------------------
Wed Jul 31 08:45:03 UTC 2013 - yast-devel@opensuse.org
- converted from YCP to Ruby by YCP Killer
(https://github.com/yast/ycp-killer)
- version 3.0.0
-------------------------------------------------------------------
Thu Jun 6 13:18:55 MDT 2013 - carnold@suse.com
- Update packages to be installed based on libvirt package changes.
- 2.23.0
-------------------------------------------------------------------
Thu May 2 12:55:18 MDT 2013 - carnold@suse.com
- bnc#817943 - Selecting some virtualization packages during
install is causing bridged networking to be set up (s390x)
-------------------------------------------------------------------
Tue Apr 30 16:56:50 MDT 2013 - carnold@suse.com
- bnc#817790 - SLES11 SP3 - unable to install KVM Hypervisor and
tools via YaST2 on s390x
- 2.22.6
-------------------------------------------------------------------
Fri Mar 22 15:55:57 MDT 2013 - carnold@suse.com
- bnc#810535 - YaST2 is lacking hypervisor installation support on
s390x
- 2.22.5
-------------------------------------------------------------------
Fri Feb 8 10:02:53 MST 2013 - carnold@suse.com
- bnc#802612 - Libvirtd does not start automatically after kvm is
installed via "yast install Hypervisor and tools"
- 2.22.4
-------------------------------------------------------------------
Wed Jan 2 14:12:13 MST 2013 - carnold@novell.com
- Enable vm-install to be built for s390x
-------------------------------------------------------------------
Thu Sep 20 06:35:12 MDT 2012 - carnold@novell.com
- bnc#780660 - Yast does not offer "Virtualization" section by
default, and no "Install Hypervisor" option, after loading
yast-vm.
- 2.22.3
-------------------------------------------------------------------
Wed Mar 14 17:00:46 MDT 2012 - carnold@novell.com
- bnc#720929 - OES11LH: Upgrade from OES 2 SP2 to OES 11 RC3
re-adds "x0..respawn..xterm" to inittab
-------------------------------------------------------------------
Mon Jan 16 14:54:33 UTC 2012 - coolo@suse.com
- confirm license
-------------------------------------------------------------------
Tue Jan 3 10:53:10 MST 2012 - carnold@novell.com
- bnc#733715 - SLES11_SP2_LOC : EN: Typo in relocation-server.pot -
'unencryptyed'
- 2.22.1
-------------------------------------------------------------------
Wed Nov 16 12:49:08 CET 2011 - jsuchome@suse.cz
- merged texts from proofreading
- 2.22.0
-------------------------------------------------------------------
Tue Nov 1 12:04:05 MDT 2011 - carnold@novell.com
- bnc#727523 - yast2 xen should be modified for 32bit
- 2.21.5
-------------------------------------------------------------------
Tue Oct 25 10:02:24 UTC 2011 - lslezak@suse.cz
- fixed translation of button labels (bnc#723657)
- 2.21.4
-------------------------------------------------------------------
Thu Sep 29 14:11:36 CEST 2011 - visnov@suse.cz
- set dialog title
- 2.21.3
-------------------------------------------------------------------
Mon Sep 19 14:40:14 CEST 2011 - visnov@suse.cz
- remove dependency on Wizard_hw
- 2.21.2
-------------------------------------------------------------------
Mon Aug 8 12:20:55 UTC 2011 - lslezak@suse.cz
- use ButtonBox for push button widgets (bnc#701273)
-------------------------------------------------------------------
Fri Aug 5 13:15:17 MDT 2011 - carnold@novell.com
- Update desktop files with more descriptive information in the
GenericName field.
- Restore xen.desktop and xen.ycp
- 2.21.1
-------------------------------------------------------------------
Fri Aug 5 12:35:48 CEST 2011 - tgoettlicher@suse.de
- fixed .desktop file (bnc #681249)
-------------------------------------------------------------------
Fri Jul 22 15:21:54 CEST 2011 - locilka@suse.cz
- Removed obsoleted X-KDE-SubstituteUID from desktop file
(bnc#540627) and replaced with xdg-su call in the Exec entry.
- 2.21.0
-------------------------------------------------------------------
Wed Jun 29 13:55:52 CST 2011 - lidongyang@novell.com
- bnc#702106 - Remove 32-bit "Install Hypervisor and Tools" from
YaST Control Center - FATE#308532
remove %ix86 from exclusive arch so that yast2-vm is available
only for the 64-bit x86 architecture.
-------------------------------------------------------------------
Mon Jun 13 14:14:40 CST 2011 - lidongyang@novell.com
- fate#311371 - Enhance yast to configure live migration for Xen
and KVM
replace xen.ycp with relocation-server.ycp
------------------------------------------------------------------
Tue Mar 8 16:17:23 MST 2011 - carnold@novell.com
- bnc#508347 - Yast2 virtualization installation error but success
message
-------------------------------------------------------------------
Wed Nov 10 15:20:12 MST 2010 - carnold@novell.com
- bnc#628256 - sysvinit: Id "x0" respawning too fast
-------------------------------------------------------------------
Thu Oct 21 11:20:32 MDT 2010 - carnold@novell.com
- bnc#647261 - Get lot's of error in .xsession-errors when lauching
yast
------------------------------------------------------------------
Wed Jan 13 18:56:03 CET 2010 - kmachalkova@suse.cz
- Adjusted .desktop file(s) to wrap /sbin/yast2/ calls in xdg-su
where root privileges are needed, removed X-KDE-SubstituteUID key
(bnc#540627)
-------------------------------------------------------------------
Wed Dec 2 16:23:55 MST 2009 - carnold@novell.com
- Add support for installing KVM.
fate#306665 - KVM reaches supported status
bnc#557233 - YaST needs to include kvm in virtualization support
functionality
-------------------------------------------------------------------
Tue Jun 16 14:29:32 CEST 2009 - mvidner@suse.cz
- Using autodocs-ycp.ami, which contains a fix for automake 1.11.
-------------------------------------------------------------------
Wed Apr 1 09:18:46 MDT 2009 - carnold@novell.com
- bnc#488598 - chkconfig and insserv fail on init scripts that
depend on /etc/init.d/boot.clock in Xen domU
-------------------------------------------------------------------
Thu Feb 12 13:04:27 CET 2009 - coolo@suse.de
- add dummy Exec line to the group desktop file to make it validate
-------------------------------------------------------------------
Fri Jan 9 08:41:58 CET 2009 - olh@suse.de
- use ExclusiveArch as in /SRC/arch/
-------------------------------------------------------------------
Wed Nov 12 13:37:57 MST 2008 - carnold@novell.com
- bnc#431907 - inst_finish.ycp:233 Client vm_finish returned
invalid data
-------------------------------------------------------------------
Wed Oct 22 16:34:20 MDT 2008 - carnold@novell.com
- bnc#436987 - yast2-vm: Cannot create VMs if XEN installation
happens via the yast2-vm module
-------------------------------------------------------------------
Thu Oct 9 13:04:01 MDT 2008 - carnold@novell.com
- Install virt-viewer as one of the GUI packages needed by xen.
-------------------------------------------------------------------
Fri May 16 16:40:22 CEST 2008 - jsrain@suse.cz
- added categories Settings and System into desktop file
(bnc #382778)
-------------------------------------------------------------------
Tue May 13 14:49:10 MDT 2008 - carnold@novell.com
- yast2-vm needs to install vm-install.
-------------------------------------------------------------------
Wed Apr 9 16:38:03 MDT 2008 - carnold@novell.com
- Disable code that modifies SuSEfirewall2.
-------------------------------------------------------------------
Wed Mar 26 13:39:06 MDT 2008 - carnold@novell.com
- In 11.0, kernel-xenpae is just kernel-xen. There is no nonpae
32bit kernel.
-------------------------------------------------------------------
Mon Mar 17 12:43:32 CET 2008 - jsrain@suse.cz
- added 'StartupNotify=true' to the desktop file (bnc #304964)
-------------------------------------------------------------------
Fri Feb 29 13:33:20 MST 2008 - carnold@novell.com
- Remove tools-ioemu dependency. This package no longer exists.
-------------------------------------------------------------------
Mon Dec 10 15:58:16 CET 2007 - lslezak@suse.cz
- merged proofread texts (2007-18-23)
-------------------------------------------------------------------
Fri Aug 31 10:31:05 CEST 2007 - stbinner@suse.de
- don't repeat Name content in GenericName field within xen.desktop
-------------------------------------------------------------------
Tue Jun 5 09:57:06 MDT 2007 - carnold@novell.com
- Respond when "help" is requested at the command line. (#269913)
- Prompt for installing graphical tools when running in text mode.
(#268510)
-------------------------------------------------------------------
Mon May 21 08:29:37 MDT 2007 - carnold@novell.com
- The 'Virtualization' category is missing and the virtualization
icons are in the other category. (#258600)
- Update icon name in yast2-vm (#258519)
-------------------------------------------------------------------
Mon Mar 12 10:16:40 MDT 2007 - carnold@novell.com
- Change the check for xenbr0 to xenbr+. (#233934)
- Remove requires rule on yast2-installation. (#252932)
-------------------------------------------------------------------
Fri Feb 23 14:59:17 MST 2007 - carnold@novell.com
- A fix to allow the xm console command to work again with
PV guests. (#244097)
-------------------------------------------------------------------
Wed Feb 21 15:49:43 MST 2007 - carnold@novell.com
- Yast2-vm now only installs the hypervisor and tools on the host
server. All other tasks have been moved to vm-install and
virt-manager.
-------------------------------------------------------------------
Wed Dec 6 15:16:51 MST 2006 - carnold@novell.com
- Yast2-vm does not remove the directory that contains the vm disk
image when deleting a vm. (#221258)
- Yast2-vm doesn't recognize an installation source set up as an
ISO file over NFS. (#224798)
-------------------------------------------------------------------
Thu Nov 16 14:29:51 MST 2006 - carnold@novell.com
- yast2-vm acquires package from the wrong install source when a
second source is specified for additional vm installs. (#217403)
-------------------------------------------------------------------
Fri Nov 3 16:47:57 MST 2006 - carnold@novell.com
- yast2-vm inserts empty cdrom line when booting from an already
installed disk causing the guest to fail because it can't attach
to the non-existent CDROM. (#210099)
- yast2-vm does not remove link in /etc/xen/auto when deleting a
VM causing error messages from xendomains when it tries to auto
start it. (#207082)
- Eliminate a "no GUI" warning message that is displayed in the pv
guest during install because textmode=1 was removed for the
framebuffer feature that did not make it in. (#215990)
-------------------------------------------------------------------
Fri Sep 1 12:43:23 MDT 2006 - mgfritch@novell.com
- Replace the 'cdrom=' entry in fully virtualized config files with
a corresponding disk line entry.
- If para virtualized, kernel is extracted from a SUSE installation
source, and domU kernel version >= 2.6.18, add "sdl=1" to config
file.
- Remove the 'extra' option with 'vnc=0 textmode=1'.
- 2.14.0
-------------------------------------------------------------------
Mon Aug 7 17:46:28 MDT 2006 - mgfritch@novell.com
- Always write out "/usr/lib/xen/bin/qemu-dm" for the device_model
field in a fully virtualized VM configuration file. (#193854)
- Add Logical Volumes (LVM) to the list of available block devices.
(#186930, #189765)
- Check whether X window system is accessible by testing for the
existance of the DISPLAY enviroment value. (#194389)
- When fully virtualized, if a bridge has not been specifed for a
given vif, do not default to the value 'bridge=xenbr0' in the
VM config file (#197777)
- Use the 'xm info' values 'max_para_memory' or 'max_hvm_memory'
instead of 'max_free_memory' when calculating the amount of
memory available for a given VM. (#184727)
- Display a popup feedback message when creating a non-sparse disk.
(#167145)
- Display a popup yes/no dialog asking if xend should be started
when it is not running. (#176369)
- 2.13.62
-------------------------------------------------------------------
Thu Jul 13 11:44:48 MDT 2006 - mgfritch@novell.com
- Do not create the disk images (i.e. dd) when proposal_type is
'boot' (#192135)
- 2.13.61
-------------------------------------------------------------------
Wed Jul 12 11:13:35 MDT 2006 - mgfritch@novell.com
- Removed fix for async mode disk read/write during paravirtualized
installs (#190869)
- 2.13.60
-------------------------------------------------------------------
Mon Jul 10 12:54:11 MDT 2006 - mgfritch@novell.com
- If paravirtualization, allow async mode disk read/write only
during the VM install. (#190869)
- 2.13.59
-------------------------------------------------------------------
Tue Jun 27 09:06:17 CEST 2006 - lslezak@suse.cz
- Initialize new installation sources, use the new source ID when
the installation source is modified (#179410)
- 2.13.58
-------------------------------------------------------------------
Fri Jun 16 15:41:34 MDT 2006 - mgfritch@novell.com
- Replace the 'extra' option 'vnc=1' with 'vnc=0 textmode=1'
(#185944)
- 2.13.57
-------------------------------------------------------------------
Tue Jun 13 16:08:23 MDT 2006 - mgfritch@novell.com
- Use 'sed -i' instead of 'sed -e' to avoid changing the file
permissions of /etc/sysconfig/console and /etc/inittab. (#184690)
- 2.13.56
-------------------------------------------------------------------
Tue Jun 6 12:03:55 MDT 2006 - mgfritch@novell.com
- Preserve the AutoYaST settings for both the install proposal and
the final proposal. Generate an autoinstallation summary proposal
that contains the settings for both the install and final
proposals. (#182149)
- 2.13.55
-------------------------------------------------------------------
Thu Jun 1 16:16:42 MDT 2006 - mgfritch@novell.com
- Do not display the 'Manage Virtual Machines' dialog when
creating an AutoYaST profile using the Autoinstallation wizard.
(#181072)
- Only enable `view button on the 'Manage Virtual Machines' dialog
if YaST is running in a graphical display (XServer) and the
selected vm is not configured to use SDL. (#181011)
- Only enable `start button on the 'Manage Virtual Machines' dialog
if YaST is running in a graphical display (XServer) or the
selected vm is configured as a paravirtualized guest. (#181009)
- Disable service 'earlykbd' when running an install inside of a
domU. (#180919)
- If paravirtualized domU install, use the 'extra' option 'vnc=1',
rather than 'textmode=1' (#181074)
- 2.13.54
-------------------------------------------------------------------
Mon May 29 01:10:44 MDT 2006 - mgfritch@novell.com
- VM_XEN::ValidateConfigName() should return false if a vm name
setting inside of a config file conflicts with the proposed
vm name (#181001)
- Search physical disk partitions specified in the VM disk settings
for a valid Xen kernel. (#180130)
- Remove any single or double quotes surrounding values read from a
VM config file. (#179324)
- If dom0 is 64 bit OS, domU is full virtualization, and domU
memory is >= 3.5 GB, set 'pae=1' in the VM config file. (#180361)
- 2.13.53
-------------------------------------------------------------------
Mon May 22 15:30:40 MDT 2006 - mgfritch@novell.com
- Allow the cdrom_image setting to persist when moving from
proposal_type 'install' to proposal_type 'boot'. (#174616)
- 2.13.52
-------------------------------------------------------------------
Fri May 19 11:12:34 CEST 2006 - lslezak@suse.cz
- allow the VM management in ncurses UI (#149045)
- 2.13.51
-------------------------------------------------------------------
Thu May 18 15:57:32 MDT 2006 - mgfritch@novell.com
- Do not install kernel-xen when installing kernel-xenpae.
(#175117)
- 2.13.50
-------------------------------------------------------------------
Wed May 17 09:59:07 CEST 2006 - lslezak@suse.cz
- check whether the package management is available at start
of the yast module (#175148)
- 2.13.49
-------------------------------------------------------------------
Tue May 16 11:23:17 MDT 2006 - mgfritch@novell.com
- Re-generate the proposed MAC address for the default network
settings when VM_XEN::resetNetworkConfig() is called. (#175955)
- Don't display mounted disk partitions in dom0 as physical disk
partitions available for use in domU. (#173433)
- Select the correct disk partition containing the xenpae kernel
or the NetWare viX kernel. (#175426, #175729)
- 2.13.48
-------------------------------------------------------------------
Thu May 11 16:18:15 MDT 2006 - mgfritch@novell.com
- Always write out the 'cdrom=' entry to the vm config file if
full virtualization and proposal_mode != 'existing'.
(#174616)
- Ask for the initrd package first and the kernel package last
when extracting a kernel/initrd from a SUSE installation source.
This should ensure CD1 is in the CD-ROM drive when the VM
installation starts. (#175111)
- Install kernel-xenpae by default for dom0 when running on
kernel-bigsmp. (#175117)
- 2.13.47
-------------------------------------------------------------------
Tue May 9 16:14:30 MDT 2006 - mgfritch@novell.com
- Default the root device if a disk partition contains the
Xen Linux kernel and ramdisk. (#162593)
- When a NetWare kernel is detected, set the 'DISPLAY=' value to
the IP address of the network interface assigned to the default
route in the IP routing table. (#173594)
- Do not display the message 'Installation will be aborted' when
we are not installing a virtual machine. (#173991)
- Remove any inst sources that were added to the disk configuration
when switching virtualization mode. (#171696)
- 2.13.46
-------------------------------------------------------------------
Mon May 8 09:37:14 MDT 2006 - mgfritch@novell.com
- Enable the Write portion of vm_finish.ycp if Arch::is_xenU()
and when `installation, `update, or `autoinst.
(#167204, #171476, #161721)
- 2.13.45
-------------------------------------------------------------------
Thu May 4 11:43:35 MDT 2006 - mgfritch@novell.com
- resetSourceConfig() must always be called after resetDiskConfig()
to ensure the disk config settings are not overrun by the source
config settings. (#172714)
- Final settings proposal should default to the PAE kernel
(vmlinuz-xenpae) when the PAE kernel was used to install the
VM. (#172977)
- Remove workaround for AMD Pacifica (svm) processor on arch x86_64
with full virtualization. (#169855)
- Display an error message if a new disk image (loopback-create)
already exists. (#173267)
- Updated text strings and comments to comply with the Style Guide
for SUSE Program Texts located on forge.
- 2.13.44
-------------------------------------------------------------------
Tue May 2 12:58:42 MDT 2006 - mgfritch@novell.com
- Added patch for "srcid" not set in results from
Pkg::PkgPropertiesAll (#163609)
- Added a popup error message to VM_Common::CreateDiskImage() for
when the 'dd' command fails to create a disk image (#172083)
- Added an additional popup error message when installing/finalizing
a VM's settings. This new popup contains a details button with the
output (stdout/stderr) of a failed xm create command (#172084)
- Final text review in preparation for text freeze.
- 2.13.43
-------------------------------------------------------------------
Tue May 2 10:21:36 MDT 2006 - mgfritch@novell.com
- Add a second yes/no pop-up warning the user about deleting a VM.
- 2.13.42
-------------------------------------------------------------------
Thu Apr 27 16:15:37 MDT 2006 - mgfritch@novell.com
- If AMD Pacifica (svm) processor, architecture is x86_64 and full
virtualization, always write out 'cpus=0' (#169855)
- Don't reset all of the proposal settings when the virtualization
mode changes (#170028)
- 2.13.41
-------------------------------------------------------------------
Wed Apr 26 12:02:46 MDT 2006 - mgfritch@novell.com
- Specify the CD-ROM device name in the URL to be used for
extracting the kernel/initrd from a SUSE CD/DVD media.
- Always display the size of each disk in the disk overview table
regardless of it's type (loop-create, loop-use, or phys).
- Values on_reboot, on_crash, and on_poweroff must always be
rewritten to the config file when virtualization type is
full. (#168203)
- Strip off any query string before writing the "install="
setting. (#169829)
- 2.13.40
-------------------------------------------------------------------
Tue Apr 25 12:18:21 MDT 2006 - mgfritch@novell.com
- Must always create new disk images when they are added as a new
disk to the table of disk images (#168206)
- Always Unmount the YaST ini agent before writing settings to a
config file (#168165)
- 2.13.39
-------------------------------------------------------------------
Fri Apr 21 14:25:58 MDT 2006 - mgfritch@novell.com
- Although console appears to be a tty, don't do character
translations (#149175)
- 2.13.38
-------------------------------------------------------------------
Thu Apr 20 12:58:34 MDT 2006 - mgfritch@novell.com
- domU has only one console (#167204)
- 2.13.37
-------------------------------------------------------------------
Wed Apr 19 15:41:23 MDT 2006 - mgfritch@novell.com
- SCR::Read(.target.dir, "/etc/xen/vm") instead of
SCR::Dir("/etc/xen/vm") to read list of used vm names (#165855)
- Can now extract the kernel and initrd using a SUSE ISO or
CD/DVD media. (#158529).
- 2.13.36
-------------------------------------------------------------------
Fri Apr 14 12:21:05 CEST 2006 - lslezak@suse.cz
- updated vm_finish client (#161720, #161721, #161756)
- pass static network configuration to linuxrc (#162713)
- 2.13.35
-------------------------------------------------------------------
Wed Apr 12 14:04:43 MDT 2006 - mgfritch@novell.com
- Launch the vncviewer using 'vncviewer localhost:<vm id>',
instead of using 'xm console <vmname>' (#165619)
- 2.13.34
-------------------------------------------------------------------
Fri Apr 7 08:37:26 CEST 2006 - lslezak@suse.cz
- don't modify bootloader configuration when confguring domain0,
it's modified by kernel-xen package (#163138)
- 2.13.33
-------------------------------------------------------------------
Thu Apr 6 22:57:50 MDT 2006 - mgfritch@novell.com
- Add dialog for managing virtual machines, similar to the
xm commands (xm list, xm create, xm destory, etc.)
- Add help text for MAC address and Bridge Name (#145663)
- Change Control Center icon name to 'Virtual Machine Management (Xen)'.
- Move Control Center icon from 'Software' catagory to 'System'.
- Various text string changes (help and UI).
- 2.13.32
-------------------------------------------------------------------
Tue Apr 4 14:52:02 CEST 2006 - lslezak@suse.cz
- dom0 configuration: modify firewall configuration - add the Xen
bridge into FW_FORWARD_ALWAYS_INOUT_DEV option (#154133),
fixed detection of a Xen section in bootloader
- 2.13.31
-------------------------------------------------------------------
Wed Mar 29 15:27:15 CEST 2006 - lslezak@suse.cz
- use "Xen" term only in the texts (#161737)
- 2.13.30
-------------------------------------------------------------------
Tue Mar 28 15:43:10 CEST 2006 - lslezak@suse.cz
- x86_64 arch: use x86_64 packages, not i386 (#161267)
- 2.13.29
-------------------------------------------------------------------
Sat Mar 25 22:46:13 MST 2006 - ccoffing@novell.com
- Overhaul from Provo, to make module more feature complete.
- 2.13.28
-------------------------------------------------------------------
Sun Mar 19 01:10:24 CET 2006 - jsrain@suse.de
- fixed size of image for AutoYaST profile (#159369)
- create mountpoint for autoinst.img (#159370)
- fixed writing AutoYaST image to domU config file
- add -F to mkfs.ext2
-------------------------------------------------------------------
Fri Mar 10 15:17:41 CET 2006 - lslezak@suse.cz
- image directory is configurable now (#156591)
- check for existing config file, don't overwrite it (#156322)
- 2.13.27
-------------------------------------------------------------------
Thu Mar 9 13:33:50 CET 2006 - lslezak@suse.cz
- merged proofread texts
- 2.13.26
-------------------------------------------------------------------
Wed Mar 8 15:48:40 CET 2006 - lslezak@suse.cz
- fixed network configuration in full virtualization mode (#145064)
- 2.13.25
-------------------------------------------------------------------
Wed Mar 8 14:04:43 CET 2006 - lslezak@suse.cz
- initialize package manager, source proposal fix (#152638)
- removed unused code (product detection)
- fixed network config reset
- 2.13.24
-------------------------------------------------------------------
Wed Mar 8 11:33:03 CET 2006 - lslezak@suse.cz
- fixed capitalization in DHCP label and proposal text
- 2.13.23
-------------------------------------------------------------------
Fri Mar 3 16:11:26 CET 2006 - lslezak@suse.cz
- display full file path and device prefix (#154016)
- 2.13.22
-------------------------------------------------------------------
Mon Feb 27 10:49:28 CET 2006 - lslezak@suse.cz
- 2.13.21
-------------------------------------------------------------------
Fri Feb 24 18:51:18 CET 2006 - lslezak@suse.cz
- new DHCP option in the network configuratino dialog (#153385)
- allow to boot from CD-ROM in full virtualization mode
-------------------------------------------------------------------
Thu Feb 23 18:26:48 CET 2006 - lslezak@suse.cz
- don't remove CD-ROM after reboot in full virtualization mode
(#145064)
-------------------------------------------------------------------
Tue Feb 21 11:29:27 CET 2006 - lslezak@suse.cz
- display warning in full virtualization mode if AutoYast
profile is configured
- check URL of an installation source
- fixed package download from an inst. source
- fixed crash due to uninitialized source (#150241)
- 2.13.20
-------------------------------------------------------------------
Tue Feb 21 08:52:58 CET 2006 - lslezak@suse.cz
- check valid disk devices in full virtualization mode (#145064)
- .spec: removed yast2-devel-packages and yast2-users
-------------------------------------------------------------------
Fri Feb 17 15:42:04 CET 2006 - lslezak@suse.cz
- boot device configuration in full virtualization mode,
start VM in background (#145064)
- xen config file fixes
- 2.13.19
-------------------------------------------------------------------
Mon Feb 13 17:29:54 CET 2006 - lslezak@suse.cz
- 2.13.18
-------------------------------------------------------------------
Mon Feb 13 17:13:42 CET 2006 - lslezak@suse.cz
- validate domain name (only alphanumeric and _-.:+ characterrs
are allowed) (#150054)
-------------------------------------------------------------------
Mon Feb 13 16:55:24 CET 2006 - lslezak@suse.cz
- resize dom0 memory size if needed (#147612)
-------------------------------------------------------------------
Mon Feb 13 15:04:06 CET 2006 - lslezak@suse.cz
- start 2nd stage at background, finish yast module (#149665)
- show the network device config popup when adding new interface
-------------------------------------------------------------------
Mon Feb 13 12:55:11 CET 2006 - lslezak@suse.cz
- don't start VM when file downloading from source fails (#147428)
- initialize target (#150241)
-------------------------------------------------------------------
Mon Feb 13 11:24:32 CET 2006 - lslezak@suse.cz
- increased default disk image size to 4GB (#149604)
- generate default MAC address for network interface (#149177)
-------------------------------------------------------------------
Mon Feb 6 14:32:16 CET 2006 - lslezak@suse.cz
- full virtualization fix (use hvm loader and builder)
- write vif option correctly (#145390)
- allow non-network source
- suppose VM crash if runtime is lower than 3 sec
- 2.13.17
-------------------------------------------------------------------
Wed Feb 1 13:12:57 CET 2006 - lslezak@suse.cz
- extract translatable strings from vm_install.xml control file
(#146651)
- 2.13.16
-------------------------------------------------------------------
Mon Jan 30 14:44:55 CET 2006 - lslezak@suse.cz
- don't write obsoleted 'nics' options to domain configuration
file (#145390)
- 2.13.15
-------------------------------------------------------------------
Wed Jan 25 11:02:12 CET 2006 - lslezak@suse.cz
- Use "RAM Disk" instead of "initrd" (#143673)
- 2.13.14
-------------------------------------------------------------------
Mon Jan 23 16:53:39 CET 2006 - lslezak@suse.cz
- merged proofed texts
- 2.13.13
-------------------------------------------------------------------
Fri Jan 20 12:53:58 CET 2006 - lslezak@suse.cz
- Improved help texts (#143669, #143672, #143674)
- Use "RAM Disk" instead of "initrd" (#143673)
- Fixes in the Full Virtualization mode
- Propose sparse images
- Create extra disk image for AutoYast profile
- 2.13.12
-------------------------------------------------------------------
Tue Jan 17 11:07:32 CET 2006 - lslezak@suse.cz
- fixed .spec file (missing inst_xen_mode.ycp in the file list)
- 2.13.11
-------------------------------------------------------------------
Fri Jan 13 15:55:27 CET 2006 - lslezak@suse.cz
- no network interfaces possible in virtual machine
- AutoYast profile selection is part of the proposal
- export selected installation source as URL in AutoYast
- configure Xen virtualization mode (paravirtualization or
full virtualization) (GUI only)
- 2.13.10
-------------------------------------------------------------------
Wed Jan 11 12:53:53 CET 2006 - lslezak@suse.cz
- AutoYast client
- 2.13.9
-------------------------------------------------------------------
Wed Jan 4 13:03:28 CET 2006 - lslezak@suse.cz
- install xen-tools package
- check whether kernel-xen and install-initrd packages
are available (#116395)
- fixed $URL_INSTALL macro expansion
- 2.13.8
-------------------------------------------------------------------
Mon Dec 19 14:18:36 CET 2005 - jsuchome@suse.cz
- merged proofed texts
- 2.13.7
-------------------------------------------------------------------
Fri Dec 16 15:11:11 CET 2005 - lslezak@suse.cz
- new client for Xen domain0 configuration (#117215)
- spelling fixes
- 2.13.6
-------------------------------------------------------------------
Mon Dec 12 17:07:25 CET 2005 - lslezak@suse.cz
- removed UML support
- 2.13.5
-------------------------------------------------------------------
Mon Dec 12 09:49:05 CET 2005 - lslezak@suse.cz
- custom kernel and RAM disk configuration
- workflow update for custom kernel
- renamed search variable
- new help texts + updates
- xen - configure more virtual network interfaces, allow to use
physical partition as storage, use existing disk image
- 2.13.4
-------------------------------------------------------------------
Tue Nov 22 11:08:39 CET 2005 - lslezak@suse.cz
- installation boot parameter - boot option has been splitted into
two parts: boot option and additional installation boot option
(used only at the first stage, e.g. autoyast option)
- xen - configure restart option
- fixed error message (part of #117215)
- version 2.13.3
-------------------------------------------------------------------
Fri Nov 11 10:30:05 CET 2005 - lslezak@suse.cz
- added command line mode support
- merged UML functionality (yast2-uml package can be dropped)
- uml - configure UMID option, um-host-install-initrd package
is not used any more (#96323)
- version 2.13.2
-------------------------------------------------------------------
Fri Oct 14 09:30:02 CEST 2005 - lslezak@suse.cz
- moved generic code to VM_Common::
- proposal definition is part of the package
- version 2.13.1
-------------------------------------------------------------------
Tue Sep 27 11:21:31 CEST 2005 - lslezak@suse.cz
- install required X packages (xorg-x11, xterm) (#117660)
- write option ioemu for emulated disk (#117711)
- version 2.13.0
-------------------------------------------------------------------
Mon Sep 19 09:34:47 CEST 2005 - lslezak@suse.cz
- fixed 'Xen' spelling (#117226)
-------------------------------------------------------------------
Fri Sep 9 11:32:13 CEST 2005 - lslezak@suse.cz
- write vif option properly into VM configuration file (#115791)
- don't start an installatinon without network source (#114740)
- 2.12.4
-------------------------------------------------------------------
Fri Aug 26 13:30:30 CEST 2005 - lslezak@suse.cz
- fixed layout of the tables (#112971)
- use arch dependend kernel-xen and install-initrd package
- reinitialize installtion sources
- fixed logging
- 2.12.3
-------------------------------------------------------------------
Fri Aug 19 12:46:23 CEST 2005 - lslezak@suse.cz
- use properly custom installation source
- mount partitions in virtual disk image
- search for kernel files, copy them to domain0
- search for root device name
- update VM configuration file before starting the 2nd stage
- create link in /etc/xen/auto when 'on boot' start
mode is selected
- add TERM=xterm kernel option (to have colours in 2nd stage)
- 2.12.2
-------------------------------------------------------------------
Fri Aug 12 12:24:14 CEST 2005 - lslezak@suse.cz
- fixed creating of an installation initrd (#104339)
- fixed configuration update after reboot (after first
installation stage)
- 2.12.1
-------------------------------------------------------------------
Fri Aug 12 09:08:10 CEST 2005 - visnov@suse.cz
- fix textdomain
-------------------------------------------------------------------
Fri Aug 5 12:34:43 CEST 2005 - lslezak@suse.cz
- initial release
- 2.12.0
