File zlib-1.2.12-add-vectorized-longest_match-for-po... of Package zlib

Overview Repositories Revisions Requests Users Attributes Meta

File zlib-1.2.12-add-vectorized-longest_match-for-power.patch of Package zlib (Revision 3065827573f03537bd6b23a35e503e1a)

Currently displaying revision 3065827573f03537bd6b23a35e503e1a , Show latest

From aecdff0646c7e188b48f6db285d8d63a74f246c1 Mon Sep 17 00:00:00 2001
From: Matheus Castanho <msc@linux.ibm.com>
Date: Tue, 29 Oct 2019 18:04:11 -0300
Subject: [PATCH] Add vectorized longest_match for Power

This commit introduces an optimized version of the longest_match
function for Power processors. It uses VSX instructions to match
16 bytes at a time on each comparison, instead of one by one.

Author: Matheus Castanho <msc@linux.ibm.com>
---
 CMakeLists.txt                         |   3 +-
 Makefile.in                            |   8 +
 configure                              |   4 +-
 contrib/power/longest_match_power9.c   | 194 +++++++++++++++++++++++++
 contrib/power/longest_match_resolver.c |  15 ++
 contrib/power/power.h                  |   2 +
 deflate.c                              |  13 ++
 7 files changed, 236 insertions(+), 3 deletions(-)
 create mode 100644 contrib/power/longest_match_power9.c
 create mode 100644 contrib/power/longest_match_resolver.c

Index: zlib-1.2.13/CMakeLists.txt
===================================================================
--- zlib-1.2.13.orig/CMakeLists.txt
+++ zlib-1.2.13/CMakeLists.txt
@@ -187,7 +187,8 @@ if(CMAKE_COMPILER_IS_GNUCC)
 
             if(POWER9)
                 add_definitions(-DZ_POWER9)
-                set(ZLIB_POWER9 )
+                set(ZLIB_POWER9
+                    contrib/power/longest_match_power9.c)
 
                 set_source_files_properties(
                     ${ZLIB_POWER9}
Index: zlib-1.2.13/Makefile.in
===================================================================
--- zlib-1.2.13.orig/Makefile.in
+++ zlib-1.2.13/Makefile.in
@@ -185,6 +185,9 @@ crc32-vx.o: $(SRCDIR)contrib/s390/crc32-
 deflate.o: $(SRCDIR)deflate.c
 	$(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)deflate.c
 
+longest_match_power9.o: $(SRCDIR)contrib/power/longest_match_power9.c
+	$(CC) $(CFLAGS) -mcpu=power9 $(ZINC) -c -o $@ $(SRCDIR)contrib/power/longest_match_power9.c
+
 slide_hash_power8.o: $(SRCDIR)contrib/power/slide_hash_power8.c
 	$(CC) $(CFLAGS) -mcpu=power8 $(ZINC) -c -o $@ $(SRCDIR)contrib/power/slide_hash_power8.c
 
@@ -255,6 +258,11 @@ deflate.lo: $(SRCDIR)deflate.c
 	$(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/deflate.o $(SRCDIR)deflate.c
 	-@mv objs/deflate.o $@
 
+longest_match_power9.lo: $(SRCDIR)contrib/power/longest_match_power9.c
+	-@mkdir objs 2>/dev/null || test -d objs
+	$(CC) $(SFLAGS) -mcpu=power9 $(ZINC) -DPIC -c -o objs/longest_match_power9.o $(SRCDIR)contrib/power/longest_match_power9.c
+	-@mv objs/longest_match_power9.o $@
+
 slide_hash_power8.lo: $(SRCDIR)contrib/power/slide_hash_power8.c
 	-@mkdir objs 2>/dev/null || test -d objs
 	$(CC) $(SFLAGS) -mcpu=power8 $(ZINC) -DPIC -c -o objs/slide_hash_power8.o $(SRCDIR)contrib/power/slide_hash_power8.c
Index: zlib-1.2.13/configure
===================================================================
--- zlib-1.2.13.orig/configure
+++ zlib-1.2.13/configure
@@ -907,8 +907,8 @@ if tryboth $CC -c $CFLAGS $test.c; then
 
   if tryboth $CC -c $CFLAGS -mcpu=power9 $test.c; then
     POWER9="-DZ_POWER9"
-    PIC_OBJC="${PIC_OBJC}"
-    OBJC="${OBJC}"
+    PIC_OBJC="$PIC_OBJC longest_match_power9.lo"
+    OBJC="$OBJC longest_match_power9.o"
     echo "Checking for -mcpu=power9 support... Yes." | tee -a configure.log
   else
     echo "Checking for -mcpu=power9 support... No." | tee -a configure.log
Index: zlib-1.2.13/contrib/power/longest_match_power9.c
===================================================================
--- /dev/null
+++ zlib-1.2.13/contrib/power/longest_match_power9.c
@@ -0,0 +1,194 @@
+/* Copyright (C) 2019 Matheus Castanho <msc@linux.ibm.com>, IBM
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include <altivec.h>
+#include "../../deflate.h"
+
+local inline int vec_match OF((Bytef* scan, Bytef* match))
+    __attribute__((always_inline));
+
+local inline int vec_match(Bytef* scan, Bytef* match)
+{
+    vector unsigned char vscan, vmatch, vc;
+    int len;
+
+    vscan  = *((vector unsigned char *) scan);
+    vmatch = *((vector unsigned char *) match);
+
+    /* Compare 16 bytes at a time.
+     * Each byte of vc will be either all ones or all zeroes,
+     * depending on the result of the comparison
+     */
+    vc = (vector unsigned char) vec_cmpne(vscan,vmatch);
+
+    /* Since the index of matching bytes will contain only zeroes
+     * on vc (since we used cmpne), counting the number of consecutive
+     * bytes where LSB == 0 is the same as counting the length of the match.
+     *
+     * There was an issue in the way the vec_cnttz_lsbb builtin was implemented
+     * that got fixed on GCC 12, but now we have to use different builtins
+     * depending on the compiler version. To avoid that, let's use inline asm to
+     * generate the exact instruction we need.
+     */
+    #ifdef __LITTLE_ENDIAN__
+    asm volatile("vctzlsbb %0, %1\n\t" : "=r" (len) : "v" (vc));
+    #else
+    asm volatile("vclzlsbb %0, %1\n\t" : "=r" (len) : "v" (vc));
+    #endif
+
+   return len;
+}
+
+uInt ZLIB_INTERNAL _longest_match_power9(deflate_state *s, IPos cur_match)
+{
+    unsigned chain_length = s->max_chain_length;/* max hash chain length */
+    register Bytef *scan = s->window + s->strstart; /* current string */
+    register Bytef *match;                      /* matched string */
+    register int len;                           /* length of current match */
+    int best_len = (int)s->prev_length;         /* best match length so far */
+    int nice_match = s->nice_match;             /* stop if match long enough */
+    int mbytes;                                 /* matched bytes inside loop */
+    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+        s->strstart - (IPos)MAX_DIST(s) : 0;
+    /* Stop when cur_match becomes <= limit. To simplify the code,
+     * we prevent matches with the string of window index 0.
+     */
+    Posf *prev = s->prev;
+    uInt wmask = s->w_mask;
+
+#if (MAX_MATCH == 258)
+    /* Compare the last two bytes at once. */
+    register Bytef *strend2 = s->window + s->strstart + MAX_MATCH - 2;
+    register ush scan_end   = *(ushf*)(scan+best_len-1);
+#else
+    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
+    register Byte scan_end1  = scan[best_len-1];
+    register Byte scan_end   = scan[best_len];
+#endif
+
+    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+     * It is easy to get rid of this optimization if necessary.
+     */
+    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
+
+    /* Do not waste too much time if we already have a good match: */
+    if (s->prev_length >= s->good_match) {
+        chain_length >>= 2;
+    }
+    /* Do not look for matches beyond the end of the input. This is necessary
+     * to make deflate deterministic.
+     */
+    if ((uInt)nice_match > s->lookahead) nice_match = (int)s->lookahead;
+
+    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
+
+    do {
+        Assert(cur_match < s->strstart, "no future");
+        match = s->window + cur_match;
+
+        /* Skip to next match if the match length cannot increase
+         * or if the match length is less than 2.  Note that the checks below
+         * for insufficient lookahead only occur occasionally for performance
+         * reasons.  Therefore uninitialized memory will be accessed, and
+         * conditional jumps will be made that depend on those values.
+         * However the length of the match is limited to the lookahead, so
+         * the output of deflate is not affected by the uninitialized values.
+         */
+
+/* MAX_MATCH - 2 should be a multiple of 16 for this optimization to work. */
+#if (MAX_MATCH == 258)
+
+        /* Compare ending (2 bytes) and beginning of potential match.
+         *
+         * On Power processors, loading a 16-byte vector takes only 1 extra
+         * cycle compared to a regular byte load. So instead of comparing the
+         * first two bytes and then the rest later if they match, we can compare
+         * the first 16 at once, and when we have a match longer than 2, we will
+         * already have the result of comparing the first 16 bytes saved in mbytes.
+         */
+        if (*(ushf*)(match+best_len-1) != scan_end ||
+             (mbytes = vec_match(scan,match)) < 3) continue;
+
+        scan  += mbytes;
+        match += mbytes;
+
+        /* In case when we may have a match longer than 16, we perform further
+         * comparisons in chunks of 16 and keep going while all bytes match.
+         */
+        while(mbytes == 16) {
+            mbytes = vec_match(scan,match);
+            scan += mbytes;
+            match += mbytes;
+
+            /* We also have to limit the maximum match based on MAX_MATCH.
+             * Since we are comparing 16 bytes at a time and MAX_MATCH == 258 (to
+             * comply with default implementation), we should stop comparing when
+             * we have matched 256 bytes, which happens when scan == strend2.
+             * In this ("rare") case, we have to check the remaining 2 bytes
+             * individually using common load and compare operations.
+             */
+            if(scan >= strend2) {
+                if(*scan == *match) {
+                    if(*++scan == *++match)
+                        scan++;
+                }
+                break;
+            }
+        }
+
+        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+        len = (MAX_MATCH - 2) - (int)(strend2 - scan);
+        scan = strend2 - (MAX_MATCH - 2);
+
+#else /* MAX_MATCH == 258 */
+
+        if (match[best_len]   != scan_end  ||
+            match[best_len-1] != scan_end1 ||
+            *match            != *scan     ||
+            *++match          != scan[1])      continue;
+
+        /* The check at best_len-1 can be removed because it will be made
+         * again later. (This heuristic is not always a win.)
+         * It is not necessary to compare scan[2] and match[2] since they
+         * are always equal when the other bytes match, given that
+         * the hash keys are equal and that HASH_BITS >= 8.
+         */
+        scan += 2, match++;
+        Assert(*scan == *match, "match[2]?");
+
+        /* We check for insufficient lookahead only every 8th comparison;
+         * the 256th check will be made at strstart+258.
+         */
+        do {
+        } while (*++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 scan < strend);
+
+        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+        len = MAX_MATCH - (int)(strend - scan);
+        scan = strend - MAX_MATCH;
+
+#endif /* MAX_MATCH == 258 */
+
+        if (len > best_len) {
+            s->match_start = cur_match;
+            best_len = len;
+            if (len >= nice_match) break;
+#if (MAX_MATCH == 258)
+            scan_end = *(ushf*)(scan+best_len-1);
+#else
+            scan_end1  = scan[best_len-1];
+            scan_end   = scan[best_len];
+#endif
+        }
+    } while ((cur_match = prev[cur_match & wmask]) > limit
+             && --chain_length != 0);
+
+    if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+    return s->lookahead;
+}
Index: zlib-1.2.13/contrib/power/longest_match_resolver.c
===================================================================
--- /dev/null
+++ zlib-1.2.13/contrib/power/longest_match_resolver.c
@@ -0,0 +1,15 @@
+/* Copyright (C) 2019 Matheus Castanho <msc@linux.ibm.com>, IBM
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "../gcc/zifunc.h"
+#include "power.h"
+
+Z_IFUNC(longest_match) {
+#ifdef Z_POWER9
+    if (__builtin_cpu_supports("arch_3_00"))
+        return _longest_match_power9;
+#endif
+
+    return longest_match_default;
+}
Index: zlib-1.2.13/contrib/power/power.h
===================================================================
--- zlib-1.2.13.orig/contrib/power/power.h
+++ zlib-1.2.13/contrib/power/power.h
@@ -10,4 +10,6 @@ uLong _adler32_power8(uLong adler, const
 
 unsigned long _crc32_z_power8(unsigned long, const Bytef *, z_size_t);
 
+uInt _longest_match_power9(deflate_state *s, IPos cur_match);
+
 void _slide_hash_power8(deflate_state *s);
Index: zlib-1.2.13/deflate.c
===================================================================
--- zlib-1.2.13.orig/deflate.c
+++ zlib-1.2.13/deflate.c
@@ -1313,6 +1313,14 @@ local void lm_init(s)
  *   string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
  * OUT assertion: the match length is not greater than s->lookahead.
  */
+
+#ifdef Z_POWER_OPT
+/* Rename function so resolver can use its symbol. The default version will be
+ * returned by the resolver if the host has no support for an optimized version.
+ */
+#define longest_match longest_match_default
+#endif /* Z_POWER_OPT */
+
 local uInt longest_match(s, pcur_match)
     deflate_state *s;
     IPos pcur_match;                             /* current match */
@@ -1460,6 +1468,11 @@ local uInt longest_match(s, pcur_match)
     return s->lookahead;
 }
 
+#ifdef Z_POWER_OPT
+#undef longest_match
+#include "contrib/power/longest_match_resolver.c"
+#endif /* Z_POWER_OPT */
+
 #else /* FASTEST */
 
 /* ---------------------------------------------------------------------------

Places

File zlib-1.2.12-add-vectorized-longest_match-for-power.patch of Package zlib (Revision 3065827573f03537bd6b23a35e503e1a)

Places