File uboot-image-a13olinuxino-install of Package JeOS
#!/bin/bash
#
# U-Boot injection script.
#
# This script installs U-Boot SPL, MLO, BL1, IMX, whatever images into
# the target image during setup time as well as on first boot.
#
# It also serves as our generic hook into things we need to do to fix
# up the build.
set -x
diskname=$1
bootdev=$2
flavor=a13olinuxino
is_firstboot=
if [ "$is_firstboot" ]; then
# We're not inside the image build, but in the first boot of an
# installed system
diskname=$(df / --output=source | tail -n1 | sed 's/[0-9]*$//;s/p$//')
is_firstboot=1
if [ -d /boot/efi ]; then
is_efi=1
fi
cd /
# During firstboot, gdisk is available at /usr/sbin.
export PATH="$PATH:/usr/sbin/"
else
# We don't have gdisk in the build system, so point to the rootfs binary
export PATH="$PATH:/usr/src/packages/KIWIROOT-oem/usr/sbin/"
# old KIWI places EFI in the root dir, KIWI-ng uses the final location
# below boot/efi/
if [[ -d EFI || -d "boot/efi/EFI" ]]; then
# We're on an EFI build, so kiwi doesn't copy u-boot over.
# This is a hack to chdir into the obs-build dir to find
# our u-boot binaries nevertheless.
pushd /usr/src/packages/KIWIROOT-oem/
is_efi=1
fi
fi
#==========================================
# Convert GPT to MBR if necessary
# TODO: remove me from here once new kiwi landed in TW and use efiparttable XML attribute instead
#------------------------------------------
if [ "$is_efi" ]; then
# Some systems can not deal with GPT partition tables, so for
# those we convert the GPT to MBR
force_mbr=
if [ -f "boot/vc/bootcode.bin" ]; then
# The RPi firmware can only read MBR
force_mbr=1
fi
if [ -f "boot/imx6-spl.bin" -o -f "boot/u-boot.imx" -o -f "boot/u-boot-dtb.imx" ]; then
# SPL goes at sector 2, overlapping GPT
force_mbr=1
fi
if [ -f "boot/arndale-bl1.img" -o \
-f "boot/bl1.bin.hardkernel" -o \
-f "boot/E4412_S.bl1.HardKernel.bin" ]; then
# BL1 goes at sector 1, overlapping GPT
force_mbr=1
fi
if [[ "$flavor" = "nanopik2" ]]; then
# BL2 goes at sector 1, overlapping GPT
force_mbr=1
fi
if [ -f "boot/u-boot-spl.kwb" ]; then
# SPL goes at sector 1, overlapping GPT
force_mbr=1
fi
if [ -f "boot/efi/boot.bin" ]; then
# ZynqMP / Zynq can only read from MBR
force_mbr=1
fi
if [[ "$flavor" = "bananapiR2" ]]; then
force_mbr=1
fi
if [[ "$flavor" = "odroidc4" ]]; then
force_mbr=1
fi
if [[ "$flavor" = "radxazero" ]]; then
force_mbr=1
fi
if [ "$force_mbr" ]; then
# The target system doesn't support GPT, so let's move it to
# MBR partition layout instead.
#
# Also make sure to set the ESP partition to type 0xc so that
# broken firmware (Rpi) detects it as FAT.
# Use tabs, "<<-" strips tabs, but no other whitespace!
cat > gdisk.tmp <<-'EOF'
x
r
g
t
1
c
w
y
EOF
losetup /dev/loop3 $diskname
dd if=/dev/loop3 of=mbrid.bin bs=1 skip=440 count=4
gdisk /dev/loop3 < gdisk.tmp
dd of=/dev/loop3 if=mbrid.bin bs=1 seek=440 count=4
losetup -d /dev/loop3
rm -f mbrid.bin
rm -f gdisk.tmp
fi
fi
#==========================================
# adjust Raspberry Pi partition table
#------------------------------------------
if [ -f "boot/vc/bootcode.bin" -a ! "$is_efi" ]; then
echo -n > gdisk.tmp
if [ ! "$is_firstboot" ]; then
# Set the name of the first partition to "vcboot" and mark
# the 1st and 2nd partitions as bootable (checked by RPi loader and U-Boot)
cat >> gdisk.tmp <<-'EOF'
c
1
vcboot
x
a
1
2
64
a
2
2
64
m
EOF
else
# Mark the 1st partition as (legacy) bootable (checked by RPi loader), since repartion removed it
cat >> gdisk.tmp <<-'EOF'
x
a
1
2
64
m
EOF
fi
# Convert GPT to hybrid GPT
cat >> gdisk.tmp <<-'EOF'
x
r
h
1 2 3
n
c
n
82
y
83
n
w
y
EOF
if [ "$is_firstboot" ]; then
gdisk /dev/mmcblk0 < gdisk.tmp
else
gdisk /dev/loop0 < gdisk.tmp
fi
rm -f gdisk.tmp
fi
#==========================================
# set certain dirs as nocow
#------------------------------------------
function nocow() {
[ -d $1 ] && chattr -R +C $i
}
for i in var/lib/mariadb var/lib/mysql var/lib/pgsql var/lib/libvirt/images var/log/journal; do
nocow $i
done
#==========================================
# copy Raspberry Pi firmware to EFI partition
#------------------------------------------
if [ -f "boot/vc/bootcode.bin" -a "$is_efi" -a ! "$is_firstboot" ]; then
echo "RPi EFI system, installing firmware on ESP"
LOOPDEV=$(partx -av $diskname | sed -n '/^\//{s/:.*//p;q;}')
mkdir -p ./mnt-pi
mount ${LOOPDEV}p1 ./mnt-pi
( cd boot/vc; tar c . ) | ( cd ./mnt-pi/; tar x )
umount ./mnt-pi
rmdir ./mnt-pi
partx -dv $LOOPDEV
losetup -d $LOOPDEV
fi
#==========================================
# install MLO as raw
#------------------------------------------
if [ -f "boot/MLO" ];then
echo "Installing MLO (SPL)..."
opt="count=1 seek=1 conv=notrunc"
if ! dd if=boot/MLO of=$diskname bs=128k $opt; then
echo "Couldn't install MLO on $diskname"
exit 1
fi
echo "Installing U-Boot..."
opt="seek=1 conv=notrunc"
if ! dd if=boot/u-boot.img of=$diskname bs=384k $opt; then
echo "Couldn't install U-Boot on $diskname"
exit 1
fi
# /.../
# To avoid any issues when parted leaves x86 boot code
# in the MBR we better clear that part of the image
# ----
dd if=/dev/zero of=$diskname bs=440 count=1 conv=notrunc
fi
#==========================================
# install Odroid (exynos4) BL* & u-boot as raw
#------------------------------------------
if [ -f "boot/E4412_S.bl1.HardKernel.bin" ];then
echo "Installing BL1..."
if ! dd if=boot/E4412_S.bl1.HardKernel.bin of=$diskname seek=1 conv=notrunc; then
echo "Couldn't install BL1 on $diskname"
exit 1
fi
echo "Installing BL2..."
if ! dd if=boot/bl2.signed.bin of=$diskname seek=31 conv=notrunc; then
echo "Couldn't install BL2 on $diskname"
exit 1
fi
echo "Installing U-Boot..."
if ! dd if=boot/u-boot.bin of=$diskname seek=63 conv=notrunc; then
echo "Couldn't install u-boot on $diskname"
exit 1
fi
if ! dd if=boot/E4412_S.tzsw.signed.bin of=$diskname seek=2111 conv=notrunc; then
echo "Couldn't install TrustZone S/W on $diskname"
exit 1
fi
fi
#==========================================
# install Odroid-X3 (exynos5) BL* & u-boot as raw
# Careful: Odroid-C2 also has bl1.bin.hardkernel
# TODO: Use image names instead of filename
#------------------------------------------
if [[ -f "boot/bl1.bin.hardkernel" && -f "boot/bl2.bin.hardkernel" ]]; then
echo "Installing BL1..."
if ! dd if=boot/bl1.bin.hardkernel of=$diskname seek=1 conv=notrunc; then
echo "Couldn't install BL1 on $diskname"
exit 1
fi
echo "Installing BL2..."
if ! dd if=boot/bl2.bin.hardkernel of=$diskname seek=31 conv=notrunc; then
echo "Couldn't install BL2 on $diskname"
exit 1
fi
echo "Installing U-Boot..."
if ! dd if=boot/u-boot.bin of=$diskname seek=63 conv=notrunc; then
echo "Couldn't install u-boot on $diskname"
exit 1
fi
if ! dd if=boot/tzsw.bin.hardkernel of=$diskname seek=719 conv=notrunc; then
echo "Couldn't install TrustZone S/W on $diskname"
exit 1
fi
fi
#==========================================
# install Arndale SPL & U-Boot as raw
#------------------------------------------
if [[ -f "boot/smdk5250-spl.bin" || -f "boot/arndale-spl.bin" ]];then
echo "Installing BL1..."
if ! dd if=boot/arndale-bl1.img of=$diskname seek=1 conv=notrunc; then
echo "Couldn't install BL1 on $diskname"
exit 1
fi
echo "Installing SPL..."
# Get SPL name (depends on U-Boot version)
SPL_FILE=$(ls boot/*-spl.bin);
if ! dd if=$SPL_FILE of=$diskname seek=17 conv=notrunc; then
echo "Couldn't install SPL ($SPL_FILE) on $diskname"
exit 1
fi
echo "Installing U-Boot..."
if ! dd if=boot/u-boot.bin of=$diskname seek=49 conv=notrunc; then
echo "Couldn't install u-boot on $diskname"
exit 1
fi
fi
#==========================================
# install sunXi/SoCFPGA SPL & U-Boot as raw
#------------------------------------------
if [[ -f "boot/sunxi-spl.bin" || -f "boot/u-boot-sunxi-with-spl.bin" || -f "boot/u-boot-with-spl.sfp" ]]; then
if [ "$is_efi" ]; then
# The GPT spans the first 33 sectors, but we need to write our
# at sector 16. Shrink the GPT to only span 5 sectors
# (16 partitions) to give us some space.
echo -e 'x\ns\n16\nw\ny' > gdisk.tmp
losetup /dev/loop3 $diskname
dd if=/dev/loop3 of=mbrid.bin bs=1 skip=440 count=4
gdisk /dev/loop3 < gdisk.tmp
dd of=/dev/loop3 if=mbrid.bin bs=1 seek=440 count=4
losetup -d /dev/loop3
rm -f mbrid.bin
rm -f gdisk.tmp
fi
if [ -f "boot/u-boot-sunxi-with-spl.bin" ]; then
echo "Installing All-in-one U-Boot/SPL..."
if ! dd if=boot/u-boot-sunxi-with-spl.bin of=$diskname bs=1024 seek=8 conv=notrunc; then
echo "Couldn't install SPL on $diskname"
exit 1
fi
elif [ -f "boot/u-boot-with-spl.sfp" ]; then
echo "Installing All-in-one U-Boot/SPL..."
if ! dd if=boot/u-boot-with-spl.sfp of=$diskname bs=64k skip=1 seek=1 conv=notrunc; then
echo "Couldn't install SPL on $diskname"
exit 1
fi
else
echo "Installing SPL..."
if ! dd if=boot/sunxi-spl.bin of=$diskname bs=1024 seek=8 conv=notrunc; then
echo "Couldn't install SPL on $diskname"
exit 1
fi
echo "Installing U-Boot..."
if ! dd if=boot/u-boot.img of=$diskname bs=1024 seek=40 conv=notrunc; then
echo "Couldn't install U-Boot on $diskname"
exit 1
fi
fi
fi
#==========================================
# install Chromebook u-boot as boot kernel
# And do the required magic!
#------------------------------------------
if [ "$flavor" = "chromebook" ]; then
if [ ! "$is_firstboot" ]; then
pushd /usr/src/packages/KIWIROOT-oem/
echo "console=tty1 debug verbose" > /tmp/config
echo "blah" > /tmp/dummy.txt # Dummy file to make new 'vbutil_kernel' tool happy
./usr/bin/vbutil_kernel --pack /tmp/newkern \
--keyblock ./usr/share/vboot/devkeys/kernel.keyblock \
--version 1 \
--signprivate ./usr/share/vboot/devkeys/kernel_data_key.vbprivk \
--config=/tmp/config --vmlinuz boot/u-boot.img --arch arm \
--bootloader /tmp/dummy.txt
LOOPDEV=$(partx -av $diskname | sed -n '/^\//{s/:.*//p;q;}')
# Copy on p2 since p1 is EFI
dd if=/tmp/newkern of=${LOOPDEV}p2
partx -dv $LOOPDEV
losetup -d $LOOPDEV
fi
# For build and after reaprtition occured on 1st boot:
# Enable bootflag on partition 3 (u-boot now looks for bootscripts on bootable partitions only)
parted $diskname set 3 boot on
# CGPT magic
./usr/bin/cgpt add -t kernel -i 2 -S 1 -T 5 -P 10 -l U-BOOT $diskname
popd
fi
#==========================================
# install i.MX 5/6 U-Boot as raw
#------------------------------------------
if [ -f "boot/u-boot.imx" -o -f "boot/u-boot-dtb.imx" ]; then
if [ ! "$is_firstboot" ]; then
pushd /usr/src/packages/KIWIROOT-oem/
else
pushd /
fi
imx_file=`ls boot/u-boot*.imx | head -n 1`
echo "Installing U-Boot: $imx_file..."
if ! dd if=$imx_file of=$diskname bs=512 seek=2 conv=notrunc; then
echo "Couldn't install U-Boot on $diskname"
exit 1
fi
popd
fi
#==========================================
# install i.MX 6 SPL & U-Boot as raw
#------------------------------------------
if [[ -f "boot/imx6-spl.bin" ]]; then
echo "Installing SPL..."
if ! dd if=boot/imx6-spl.bin of=$diskname bs=1024 seek=1 conv=notrunc; then
echo "Couldn't install SPL on $diskname"
exit 1
fi
echo "Installing U-Boot..."
if ! dd if=boot/u-boot.img of=$diskname bs=1024 seek=69 conv=notrunc; then
echo "Couldn't install U-Boot on $diskname"
exit 1
fi
fi
#==========================================
# install Marvell SPL as raw
#------------------------------------------
if [ -f "boot/u-boot-spl.kwb" ]; then
echo "Installing SPL..."
if ! dd if=boot/u-boot-spl.kwb of=$diskname bs=512 seek=1 conv=notrunc; then
echo "Couldn't install SPL on $diskname"
exit 1
fi
fi
#==========================================
# install Rockchip 32-bit SPL as raw
#------------------------------------------
if [[ -f "boot/u-boot-spl.rksd" ]]; then
if [[ -f "boot/u-boot.bin" ]]; then
cat boot/u-boot-spl.rksd boot/u-boot.bin > u-boot.tmp
echo "Installing SPL + U-Boot..."
if ! dd if=u-boot.tmp of=$diskname bs=512 seek=64 conv=notrunc; then
echo "Couldn't install U-Boot on $diskname"
exit 1
fi
rm u-boot.tmp
else
echo "Installing SPL..."
if ! dd if=boot/u-boot-spl.rksd of=$diskname bs=512 seek=64 conv=notrunc; then
echo "Couldn't install SPL on $diskname"
exit 1
fi
echo "Installing U-Boot..."
if ! dd if=boot/u-boot.img of=$diskname bs=512 seek=256 conv=notrunc; then
echo "Couldn't install U-Boot on $diskname"
exit 1
fi
fi
fi
#==========================================
# install Rockchip TPL/SPL + ITB as raw
# (RK3328, RK3399 platforms)
#------------------------------------------
if [[ -f "boot/idbloader.img" && -f "boot/u-boot.itb" ]]; then
echo "Installing idbloader.img..."
dd if=boot/idbloader.img of=$diskname bs=512 seek=64 conv=notrunc;
echo "Installing u-boot.itb..."
dd if=boot/u-boot.itb of=$diskname bs=512 seek=16384 conv=notrunc;
fi
#==========================================
# install Odroid-C2 SPL as raw
#------------------------------------------
if [ "$flavor" = "odroidc2" ]; then
echo "Installing BL1 (1/2)..."
if ! dd if=boot/bl1.bin.hardkernel of=$diskname bs=1 count=442 conv=notrunc; then
echo "Couldn't install BL1 on $diskname"
exit 1
fi
echo "Installing BL1 (2/2)..."
if ! dd if=boot/bl1.bin.hardkernel of=$diskname bs=512 skip=1 seek=1 conv=notrunc; then
echo "Couldn't install BL1 on $diskname"
exit 1
fi
echo "Installing U-Boot..."
if ! dd if=boot/u-boot.odroidc2 of=$diskname bs=512 seek=97 conv=notrunc; then
echo "Couldn't install U-Boot on $diskname"
exit 1
fi
fi
#==========================================
# install Odroid-C4 as raw
#------------------------------------------
if [ "$flavor" = "odroidc4" ]; then
echo "Installing u-boot.bin..."
dd if=boot/u-boot.bin of=$diskname bs=512 seek=1 conv=notrunc;
fi
#==========================================
# install bananpi-r2 U-Boot, preloader as raw
#------------------------------------------
if [ "$flavor" = "bananapiR2" ]; then
echo "Installing device header ..."
if ! dd if=boot/fw/BPI-R2-HEAD440-0k.img of=$diskname bs=512 seek=0 conv=notrunc; then
echo "Couldn't install device header on $diskname"
exit 1
fi
echo "Installing BRLYT header..."
if ! dd if=boot/fw/BPI-R2-HEAD1-512b.img of=$diskname bs=512 seek=1 conv=notrunc; then
echo "Couldn't install BRLYT header on $diskname"
exit 1
fi
echo "Installing preloader..."
if ! dd if=boot/fw/preloader.bin of=$diskname bs=1k seek=2 conv=notrunc; then
echo "Couldn't install preloader on $diskname"
exit 1
fi
echo "Installing U-Boot..."
if ! dd if=boot/u-boot.bin of=$diskname bs=1k seek=320 conv=notrunc; then
echo "Couldn't install U-Boot on $diskname"
exit 1
fi
fi
#==========================================
# install Zynq to the first MBR partition
#------------------------------------------
if [ "$flavor" = "zturn" ]; then
LOOPDEV=$(partx -av $diskname | sed -n '/^\//{s/:.*//p;q;}')
mkdir ./mnt-tmp
mount ${LOOPDEV}p1 ./mnt-tmp
for t in boot.bin u-boot.img; do
install -D -v boot/$t mnt-tmp/$t
done
umount ./mnt-tmp
rmdir ./mnt-tmp
partx -dv $LOOPDEV
losetup -d $LOOPDEV
fi
# End of EFI changed directory scope
if [ -z "$is_firstboot" -a -n "$is_efi" ]; then
popd
fi
if [ "$is_firstboot" ]; then
for file in /etc/sysconfig/bootloader /etc/default/grub; do
# Make 2nd boot quieter since we already succeeded booting :-)
[ -e "$file" ] && sed -i -e 's/loglevel=3/quiet/' $file
done
# Fix up grub2 efi installation on 32bit arm (shouldn't hurt elsewhere)
if grep -q boot/efi /etc/fstab; then
mkdir -p /boot/efi
mount /boot/efi
/sbin/update-bootloader --reinit
fi
else
# Install a startup.nsh file so we boot automatically via the EFI shell
if [ -f boot/grub2/*efi/grub.efi -o -f ./EFI/BOOT/boot*.efi ];then
echo "EFI system, installing startup.nsh"
LOOPDEV=$(partx -av $diskname | sed -n '/^\//{s/:.*//p;q;}')
mkdir ./mnt-tmp
mount ${LOOPDEV}p1 ./mnt-tmp
if [ -f boot/grub2/arm-efi/grub.efi ]; then
echo "bootarm" > mnt-tmp/startup.nsh
elif [ -f boot/grub2/arm64-efi/grub.efi ]; then
echo "bootaa64" > mnt-tmp/startup.nsh
elif [ -f boot/grub2/riscv64-efi/grub.efi ]; then
echo "bootriscv64" > mnt-tmp/startup.nsh
fi
umount ./mnt-tmp
rmdir ./mnt-tmp
partx -dv $LOOPDEV
losetup -d $LOOPDEV
fi
fi
#==========================================
# install DTBs on boot partition
#------------------------------------------
if [ -z "$is_firstboot" ]; then
if [ -e /usr/src/packages/KIWIROOT-oem/boot/dtb -a -n $bootdev ];then
echo "System uses device trees, installing to boot partition"
bootpart=$(echo $bootdev | sed 's/.*loop[0-9][0-9]*p/p/')
loop=$(partx -av $diskname | sed -n '/^\//{s/:.*//p;q;}')
mkdir ./mnt-tmp
mount $loop$bootpart ./mnt-tmp
# KIWI copies dtb on non-EFI systems; check and skip
if [ -e ./mnt-tmp/dtb ]; then
echo "DTBs already in place"
# In case bootdev and rootdev are the same, the dtbs will be already
# located in the rootdev below /boot/
elif [ ! \( -e ./mnt-tmp/boot -a -e ./mnt-tmp/boot/dtb \) ];then
cp -a /usr/src/packages/KIWIROOT-oem/boot/dtb* ./mnt-tmp/
fi
umount ./mnt-tmp
partx -dv $loop
losetup -d $loop
fi
fi
#==========================================
# Install boot.scr where needed
#------------------------------------------
if [ -e boot/boot.scr ]; then
# We need to use standalone u-boot, but kiwi only support EFI/Grub2
# So, use EFI layout for kiwi, but then copy boot.scr on partition #1 (EFI)
# to boot with standalone u-boot instead of bootefi (since some boards do not support it).
echo "Copy boot.scr on EFI boot partition"
# p1 is pseudo-EFI partition, p2 is rootfs (with boot/ folder)
BOOTPART=$(echo "$bootdev" | sed 's/p[0-9][0-9]*$/p1/')
mkdir ./mnt-boot
mount $BOOTPART ./mnt-boot
# Copy boot script
cp boot/boot.scr ./mnt-boot/
umount ./mnt-boot
rmdir ./mnt-boot
fi
#==========================================
# Sabrelite autoboot with SPI flashed u-boot
#------------------------------------------
if [ "$flavor" = "sabrelite" ]; then
# Sabrelite has a built-in u-boot which looks for 6x_bootscript
# add one which will chain load our u-boot (on mmc0 or mmc1 only)
sabrelite_conf=mnt-boot/6x_bootscript.txt
sabrelite_binconf=mnt-boot/6x_bootscript
BOOTPART=$(echo "$bootdev" | sed 's/p[0-9][0-9]*$/p1/')
mkdir ./mnt-boot
mount $BOOTPART ./mnt-boot
cat >> $sabrelite_conf <<-"EOF"
setenv boot_on_sd3 'mw.l 0x020d8040 0x3040 && mw.l 0x020d8044 0x10000000 && reset'
setenv boot_on_usd4 'mw.l 0x020d8040 0x3840 && mw.l 0x020d8044 0x10000000 && reset'
if itest.s "xmmc" == "x$dtype"; then
if itest 0 == ${disk}; then
run boot_on_sd3
else
run boot_on_usd4
fi
fi
EOF
mkopts="-A arm -O linux -a 0 -e 0 -T script -C none";
if ! mkimage $mkopts -n 'Boot-Script' -d $sabrelite_conf $sabrelite_binconf;then
echo "Failed to create 6x_bootscript image"
fi
umount ./mnt-boot
rmdir ./mnt-boot
fi
if ! [ "$is_firstboot" ]; then
if [ "$flavor" = "socfpgade0nanosoc" ]; then
echo "install FPGA loader support at boot"
LOOPDEV=$(partx -av $diskname | sed -n '/^\//{s/:.*//p;q;}')
mkdir ./mnt-tmp
mount ${LOOPDEV}p1 ./mnt-tmp
fpga_conf=mnt-tmp/boot.script
fpga_binconf=mnt-tmp/boot.scr
cat >> $fpga_conf <<-"EOF"
echo "Disable watchdog"
mw.l 0xffd05014 0x00000040
setenv fpga_bitfiles 'fpga.rbf atlas_soc_ghrd.rbf'
setenv fpga_part 1
setenv devtype mmc
setenv devnum 0
setenv load_fpga_bitfile 'load ${devtype} ${devnum}:${fpga_part} ${loadaddr} ${fpga_bitfile}; fpga load 0 ${loadaddr} ${filesize}; bridge enable'
setenv scan_mmc_for_fpgafile 'for fpga_bitfile in ${fpga_bitfiles}; do if test -e ${devtype} ${devnum}:${fpga_part} ${fpga_bitfile}; then echo Found FPGA bitfile ${fpga_bitfile}; run load_fpga_bitfile; fi; done'
run scan_mmc_for_fpgafile
echo "nothing else to do, continue boot ..."
EOF
mkopts="-A arm -O linux -a 0 -e 0 -T script -C none";
if ! mkimage $mkopts -n 'Boot-Script' -d $fpga_conf $fpga_binconf;then
echo "Failed to create FPGA uboot script image"
fi
umount ./mnt-tmp
rmdir ./mnt-tmp
partx -dv $LOOPDEV
losetup -d $LOOPDEV
fi
fi
if [ "$flavor" = "hifiveunleashed" -o "$flavor" = "hifiveunmatched" ]; then
# create two additional partitions
echo "Creating FSBL and U-Boot partitions..."
sgdisk -a 2 \
-n 4:34:2081 -c 4:FSBL -t 4:5b193300-fc78-40cd-8002-e86c45580b47 \
-n 5:2082:6177 -c 5:U-Boot -t 5:2e54b353-1271-4842-806f-e436d6af6985 \
$diskname
echo "Installing SPL..."
LOOPDEV=$(partx -av $diskname | sed -n '/^\//{s/:.*//p;q;}')
if ! dd if=boot/u-boot-spl.bin of=${LOOPDEV}p4 bs=1M; then
echo "Couldn't install SPL on $diskname"
exit 1
fi
echo "Installing U-Boot..."
if ! dd if=boot/u-boot.itb of=${LOOPDEV}p5 bs=1M; then
echo "Couldn't install U-Boot on $diskname"
exit 1
fi
partx -dv $LOOPDEV
losetup -d $LOOPDEV
fi
if [ "$flavor" = "starfivevisionfive2" ]; then
echo "Creating firmware partitions"
sgdisk -n 4:4096:8191 -c 0:spl -t 0:2E54B353-1271-4842-806F-E436D6AF6985 \
-n 5:8192:16383 -c 0:uboot -t 0:BC13C2FF-59E6-4262-A352-B275FD6F7172 \
-r 2:5 $diskname
echo "for SPL and U-Boot"
dd if=boot/u-boot-spl.bin.normal.out of=$diskname conv=notrunc bs=2M seek=1
dd if=boot/u-boot.itb of=$diskname conv=notrunc bs=2M seek=2
fi
