File multipath-tools.changes of Package multipath-tools

Overview Repositories Revisions Requests Users Attributes Meta

File multipath-tools.changes of Package multipath-tools (Revision a8a5daa29266ed79c9a937ed9a6babbc)

Currently displaying revision a8a5daa29266ed79c9a937ed9a6babbc , Show latest

-------------------------------------------------------------------
Wed Feb  2 09:56:59 UTC 2022 - Martin Wilck <mwilck@suse.com>

- Version 0.8.8+45+suse.628d603e
  * fix handling of historical-service-time path selector (bsc#1195425)
  * fix marking multipath devices as failed prematurely on startup
    (bsc#1195426)
  * multipathd.service: remove LimitCORE=infinity directive
    This should only be enabled for debugging.
  * multipathd.service: don't load scsi_dh modules (bsc#1195397)
    This is done via modules-load.d functionality on (open)SUSE
- Upstream fixes:
  * Fix claiming of paths with "find_multipaths strict"
  * Avoid unnecessary read-only reloads

-------------------------------------------------------------------
Fri Jan  7 19:51:14 UTC 2022 - Martin Wilck <mwilck@suse.com>

- Version 0.8.8+13+suse.79c3556f
  * code-wise identical to 0.8.8+38+suse.2bdd3a14
    (previous version number was too high by mistake)

-------------------------------------------------------------------
Mon Dec 06 15:53:53 UTC 2021 - mwilck@suse.com

- Update to 0.8.8+38+suse.2bdd3a14.obscpio
  * upstream version bump. Code-wise identical to 0.8.7+138+suse.7c9afe31

-------------------------------------------------------------------
Fri Dec  3 11:00:32 UTC 2021 - Martin Wilck <mwilck@suse.com>

- Drop versioned dependency on libmpath0 again (bsc#1190622)
  * Since 0.8.6, libmultipath and libmpathpersist have got proper ABI 
    versioning, and rpmbuild auto-generates dependencies on 
    libmultipath.so.0(LIBMULTIPATH_13.0.0) etc.

-------------------------------------------------------------------
Thu Dec  2 16:41:34 UTC 2021 - Martin Wilck <mwilck@suse.com>

- Update to version 0.8.7+138+suse.7c9afe31:
  New upstream version (pre-0.8.8)
  
  * deprecate "config_dir" and "multipath_dir" config options
    (will be removed in future version)
  * remove dependency on systemd-udevd-settle.service (boo#1193336)
  * fix crash in remove_map (boo#1193334)
  * CLI: add path wildcard "%I" for init state
  * CLI: add "reconfigure all" command
  * allow multiple pending "reconfigure" commands (bsc#1189551)
  * speed up "reconfigure" by avoiding unnecessary map reloads
    (bsc#1189551)
  * rework of CLI command handler (unix socket handler) to avoid
    hanging CLI commands (bsc#1189551)
  * fix multipathd startup after stop during reconfigure (boo#1193338)
  * improve error detection and warning messages in config file parser
  * fix exit status of multipath -T (bsc#1191900)
  * fix defects reported by coverity (boo#1193342)
    - avoid sleeping with locks held
    - exit if bindings file is broken
    - set umask before mkstemp
    - add bounds and consistency checks in SCSI VPD parsing code
  * add hardware table entry for DellEMC/ME4 (PowerVault ME4)

-------------------------------------------------------------------
Tue Sep 21 09:45:42 UTC 2021 - Martin Wilck <mwilck@suse.com>

- Add a versioned dependency of multipath-tools on libmpath0
  (bsc#1190622)

-------------------------------------------------------------------
Fri Sep 10 20:36:51 UTC 2021 - Martin Wilck <mwilck@suse.com>

- Update to version  0.8.7+14+suse.5a09bfa1:
  * Fix possible string overflows (bsc#1188148)

- Upstream fixes / changes
  * better string handling
  * multipath: print warning if multipathd isn't running
  * mpathpersist: better error msg when no usable paths exist
  * fixes from 0.8.6+32+suse.f11c192 merged upstream
  
-------------------------------------------------------------------
Fri Aug 13 11:03:13 UTC 2021 - Martin Wilck <mwilck@suse.com>

- Spec file: remove compatibility code for SLE <= SLE15-SP2

-------------------------------------------------------------------
Thu Aug 12 20:08:23 UTC 2021 - mwilck@suse.com

- Update to version 0.8.6+32+suse.f11c192:
  * libmultipath:fix compilation with glibc 2.34 (bsc#1189099)
  * libmultipath: avoid buffer size warning with systemd 240+ 
    (bsc#1189176)
  * libmultipath: use uint64_t for sg_id.lun (bsc#1187534)

- Upstream bug fixes:
  * multipath-tools: make HUAWEI/XSG1 config work with alua and multibus
  * multipath-tools: add info about HPE Alletra 6000 and 9000
  * multipathd: cli_getprkey(): fix return value and "aptpl" support
  * multipathd: don't rescan_path on wwid change in uev_update_path
  * kpartx: Don't leak memory when getblock returns NULL
  * multipath: free vectors in configure
  * multipathd: fix ev_remove_path return code handling
  * multipathd: remove duplicate orphan_paths in flush_map
  * multipathd: don't fail to remove path once the map is removed
  * multipathd: fix compilation issue with liburcu < 0.8

-------------------------------------------------------------------
Tue Jun  8 09:34:23 UTC 2021 - Ludwig Nussel <lnussel@suse.de>

- install to /usr on Tumbleweed (boo#1029961)

-------------------------------------------------------------------
Tue May 18 17:43:13 UTC 2021 - Martin Wilck <mwilck@suse.com>

- Update to version 0.8.6+10+suse.47711374:
  * Github workflows: add CI for SUSE-specific branches

-------------------------------------------------------------------
Fri Apr  2 00:01:23 UTC 2021 - Martin Wilck <mwilck@suse.com>

- Disabled LTO for multipath-tools
  * The test for is_valid_path fails if LTO is enabled, just
    disabling it for %check is insufficient.

-------------------------------------------------------------------
Thu Apr 01 21:00:32 UTC 2021 - mwilck@suse.com

- Update to version 0.8.6+9+suse.6c05a61:
  Update to upstream 0.8.6.

* add eh_deadline option to avoid endless SCSI error handling
  * add wwid_recheck option to detect storage configuration changes
  * add library versioning for libmultipath, libmpathpersist etc. and
    to libmultipath plugins
  * move some global symbols to libmultipath (udev, logsink, etc)
    and provide default implementations for get_multipath_config() etc.
    This allows simplifiying libmpathpersist_example.c drastically.
  * fixes for shutdown issues and various race conditions on exit
  * improve cleanup on exit, fix memory leaks
  * add libmpathvalid library
  * fixes for SAS expanders (bsc#1178377, bsc#1178379, bsc#1177081)
  * Avoid access to root FS while queueing IO (bsc#1178049,
    bsc#1181234)
  * lots of bug fixes, additions to built-in hardware table, and
    CI improvements (bsc#1186212)
  * kpartx: free loop device after listing partitions (boo#1107187)

Bug fixes on top of 0.8.5 mentioned below are also included in
  this upstream version.

-------------------------------------------------------------------
Thu Apr 01 11:01:34 UTC 2021 - mwilck@suse.com

- Update to version 0.8.5+30+suse.633836e:
  * multipathd: give up "add missing path" after multiple failures
  (bsc#1183963)

-------------------------------------------------------------------
Thu Mar 18 09:48:47 UTC 2021 - mwilck@suse.com

- Update to version 0.8.5+29+suse.5dabcd2:
  * 11-dm-mpath.rules: run "multipath -U" with -v1 (bsc#1182871)
  * libmultipath: merge update_multipath_table() and update_multipath_status()
  (bsc#1183666)

-------------------------------------------------------------------
Fri Mar 12 14:53:41 UTC 2021 - mwilck@suse.com

- Update to version 0.8.5+26+suse.2cbedfd:
  Avoid "illegal request" errors on non-RDAC storage
  (bsc#1182072, bsc#1177371)

-------------------------------------------------------------------
Wed Mar 10 10:16:38 UTC 2021 - mwilck@suse.com

- Update to version 0.8.5+23+suse.c11b054:
  * multipath -U: reduce log level of "adding new path" message 
   (bsc#1181435, bsc#1183666)

-------------------------------------------------------------------
Wed Feb 10 14:30:15 UTC 2021 - mwilck@suse.com

- Update to version 0.8.5+22+suse.e1e3c48:
  * multipath-tools tests: fix stringop-overflow build errors with gcc 11
    (bsc#1181877)
  * README moved to README.md (has been converted to markdown upstream)

-------------------------------------------------------------------
Wed Dec 16 12:11:07 UTC 2020 - mwilck@suse.com

- Update to version 0.8.5+12+suse.3b0e9ca
  * libmultipath: force map reload if udev incomplete 
  (bsc#1178662, bsc#1172157, bsc#1175454, bsc#1176406)
- Fixes from upstream 0.8.5
  * multipath-tools: add MacroSAN arrays to hwtable
  * libmultipath: Allow discovery of USB devices
  (add configuration option "allow_usb_devices")

-------------------------------------------------------------------
Fri Dec  4 11:27:54 UTC 2020 - Martin Wilck <mwilck@suse.com>

- Remove compatibility code for SLE <= 12-SP2 from spec file

-------------------------------------------------------------------
Thu Sep 17 16:18:54 UTC 2020 - Martin Wilck <mwilck@suse.com>

- Bugref for all minor fixes since SLE15-SP2 release (bsc#1176670)
- Added README.alua

-------------------------------------------------------------------
Wed Sep 16 20:36:40 UTC 2020 - mwilck@suse.com

- Update to version 0.8.4+192+suse.1bc10ad:
  * Fix handling of hardware properties for maps without paths
  (bsc#1176644)

-------------------------------------------------------------------
Wed Sep 16 16:44:13 UTC 2020 - mwilck@suse.com

- Update to version 0.8.4+190+suse.fe234ea:
  * Fixes for daemon shutdown issues from  SLE(bsc#1110060, bsc#1110439)
    - multipathd: allow shutdown during configure()
  * fix compilation of external programs with -lmultipath
  (bsc#1133957, necessary after the above fix)
  * Minor upstream fixes

-------------------------------------------------------------------
Thu Sep 10 19:06:10 UTC 2020 - Martin Wilck <mwilck@suse.com>

- Missing past changelog bug references:
  * 0.7.3+10+suse.70ccb55b0439:
  Patch series for NVMe discovery and failover (bsc#1038865, 
  bsc#1057820)
  * 0.7.9+109+suse.203c1cf
  * setup_map: wait for pending path checkers to finish
  (bsc#1118224)

-------------------------------------------------------------------
Thu Aug 27 09:35:56 UTC 2020 - mwilck@suse.com

- Update to version 0.8.4+183+suse.1817ce2:
  Added reviewed upstream fix for multipath crash
  * multipath: get_dm_mpvec: discard broken maps

-------------------------------------------------------------------
Wed Aug 26 10:01:17 UTC 2020 - mwilck@suse.com

- Update to version 0.8.4+180+suse.50a2698:
  * Fix memory access / leak issues found with valgrind

-------------------------------------------------------------------
Fri Aug 21 22:28:33 UTC 2020 - mwilck@suse.com

- Update to version 0.8.4+170+suse.801341f:
  * libmultipath: tests: fix bitfield tests
  * Spec file: disable LTO for %check (bsc#1133122)

-------------------------------------------------------------------
Thu Aug 20 19:20:59 UTC 2020 - mwilck@suse.com

- Update to version 0.8.4+167+suse.70bef90: 
  Pull in reviewed upstream changes
- Bug fixes
  * libmultipath: add consistency check for alias settings (bsc#1172429)
  * libmultipath: select_action(): don't drop map if alias clashes (bsc#1172429)
  * libmultipath: refuse reloading an existing map with different WWID
    (bsc#1172429)
  * libmultipath: select_action(): force udev reload for uninitialized maps
    (bsc#1172157)
  * multipathd: uev_trigger(): handle incomplete ADD events (bsc#1172157)
  * improve logging for failure to set dev_loss_tmo (bsc#1173060, bsc#1173064)
  * libmultipath: add device to hwtable.c (bsc#1174026) (ETERNUS AHB)
- New features
  * multipath: add -D option to skip multipathd delegation
  * multipath: delegate flushing maps to multipathd
  * multipathd: add "del maps" multipathd command
- Other changes
  * cleanup disassemble_map() code path (bsc#1178377, bsc#1178379)
  * multipath-tools: introduce INIT_REMOVED state
  * logging improvements
  * fix "multipathd show devices"
  * libmultipath: remove uevent listener failback
  * libmultipath: create bitfield abstraction
  * libmultipath: count pending paths as active on loads
  * kpartx: handle alternate bsd disklabel location
- Lots of minor fixes and cleanups
- Spec file: use %service_del_postun_without_restart macro

-------------------------------------------------------------------
Wed Jun 10 10:56:49 UTC 2020 - mwilck@suse.com

- Update to version 0.8.4+43+suse.908383f:
  * enable negated regular expression syntax in conf file
    (bsc#1182917)
  * change default devnode blacklist to 
    '!^(sd[a-z]|dasd[a-z]|nvme[0-9])'

-------------------------------------------------------------------
Mon Jun 08 16:13:31 UTC 2020 - mwilck@suse.com

- Update to version 0.8.4+40+suse.b06c2e5a:
- Fix udev rule processing during coldplug (bsc#1172157)
  * 11-dm-mpath.rules: Fix udev rule processing during coldplug
- Fix compilation with gcc-10
  * fix boolean value with json-c 0.14
  * libmultipath: fix condlog NULL argument in uevent_get_env_var
- Reviewed upstream changes:
  * simplify failed_wwid code
  * centralize path validation code
- Use pkgconfig for BuildRequires

-------------------------------------------------------------------
Tue May 12 20:17:49 UTC 2020 - mwilck@suse.com

- Update to version 0.8.4+31+suse.8f53764:
  * Fix sporadic build failures caused by missing build dependencies

-------------------------------------------------------------------
Mon May 11 22:18:07 UTC 2020 - mwilck@suse.com

- Update to version 0.8.4+29+suse.c27ed8d:
  * multipath-tools: Makefile.inc: set -Wno-error=clobbered
  * Makefile.inc: keep warning flags during rpm build
  * Eliminate compiler warnings on 32bit build.
  * Fixes for tests under i586
- Spec file: add %check section to run multipath-tools CI
  * not on SLE12, as cmocka is missing
  * add build dependency on cmocka for building tests
  * run "make test" with parallel make

-------------------------------------------------------------------
Mon May 11 12:25:31 UTC 2020 - mwilck@suse.com

- Update to version 0.8.4+19+suse.48fc2f4:
  * multipath: add "-e" option to enable foreign libraries
  * libmultipath: set "enable_foreign" to NONE by default
  * deleted libmultipath-set-enable_foreign-to-NONE-by-default.patch
    (included in factory git repo now).
  * Makefile: dependency fixes for parallel build
- Get rid of %is_opensuse:  
  * drop build workaround for Leap 42.1
  * build libdmmp for everything except SLE12/Leap42 and older
- Other spec file updates:
  * use %make_build to speed up build (possible with 0.8.4)
- Migrated to .obscpio format.

-------------------------------------------------------------------
Fri May 08 16:13:36 UTC 2020 - mwilck@suse.com

- Update to version 0.8.4+16+suse.f319f7ea
- Changed github workflow back from merge-based to rebase-based.
  This makes it much easier to assess differences between upstream
  and SUSE code. 
  * Use TAG_OFFSET in _service, as this is now possible again.
- Reviewed upstream patches added:
  * kpartx.rules: fix handling of synthetic uevents (bsc#1161923)
  * libmpathpersist: limit PRIN allocation length to 8192 bytes
  (bsc#1165786)
- Update upstream version to 0.8.4
  * drop nr_active field, always count active paths (bsc#1125043)
  * kpartx: fix detection of dasd partition tables on loop devices
    (bsc#1139775)
  * directio path checker fixes
  * lots of fixes for compiler warnings, and cleanups
  * nvme: update to nvme-cli 1.9

-------------------------------------------------------------------
Wed Feb 12 20:41:59 UTC 2020 - mwilck@suse.com

- Update to version 0.8.3+11+suse.7dcdf2f:
  * libmultipath: fix files read from config_dir (bsc#1162896)

-------------------------------------------------------------------
Thu Jan 16 12:11:54 UTC 2020 - mwilck@suse.com

- Update to version 0.8.3+10+suse.86684b9:
  * libmultipath: fix compilation with -fno-common
  (boo#1160403)

-------------------------------------------------------------------
Fri Oct 04 10:22:41 UTC 2019 - mwilck@suse.com

- Update to version 0.8.3+9+suse.f6f2a52
- Minor upstream improvements and bug fixes
  * libmultipath: EMC PowerMax NVMe device config

-------------------------------------------------------------------
Wed Sep 04 08:39:34 UTC 2019 - mwilck@suse.com

- Update to version 0.8.2+27+suse.3ff280b:
  * Added upstream patch to fix premature path reinstantiation
    with san_path_err_XX (boo#1149319)

-------------------------------------------------------------------
Thu Aug 29 08:22:13 UTC 2019 - mwilck@suse.com

- Update to version 0.8.2+26+suse.d884195:
- Don't activate NVMe native multipath support by default
  * multipath.conf.5: document foreign library support
  * multipath.conf: add "enable_foreign" parameter (bsc#1139837)
  * Set default for "enable_foreign" to "NONE" (bsc#1139837)
    added libmultipath-set-enable_foreign-to-NONE-by-default.patch
- Added reviewed upstream patches (marginal path patch set from Red Hat)
  * add "marginal_pathgroups" config option
  * deprecate "delay_wait_checks" and "delay_watch_checks"; they are
    now automatically mapped to eqivalent "san_path_err_..." settings.

-------------------------------------------------------------------
Tue Jul 16 13:01:13 UTC 2019 - mwilck@suse.com

- Update to version 0.8.2+11+suse.0f6a649:
  * kpartx: recognize DASD on loop devices again (bsc#1139775)
  * Bump version to 0.8.2 - most changes were already in SUSE tree
  * Man page improvements (bsc#1148767)

-------------------------------------------------------------------
Tue Jul 02 22:21:14 UTC 2019 - mwilck@suse.com

- Update to version 0.8.1+59+suse.f947184:
  * libmultipath: trigger uevents for partitions, too (bsc#1140146)

-------------------------------------------------------------------
Tue Jun 25 20:55:38 UTC 2019 - mwilck@suse.com

- Update to version 0.8.1+58+suse.2af8f92:
  * libmultipath: more cautious blacklisting by missing property
    (don't blacklist paths because of temporarily missing
     udev properties)
  * libmultipath: fix memory leak with "uid_attrs" config option
  * libmultipath: get_uid: straighten the fallback logic
- Fix SCSI VPD 0x80/0x83 parsing 
- Fix compiler warnings introduced by gcc 9:
  * -Wstringop-overflow, -Wstringop-truncation, 
    -Waddress-of-packed-member

-------------------------------------------------------------------
Tue Jun 25 15:42:56 UTC 2019 - mwilck@suse.com

- Update to version 0.8.1+28+suse.fea562a:
  * mpathpersist: optimize for setups with many LUNs (bsc#1134648)
  * mpathpersist: add option -f/--batch-file (bsc#1134648)
  * libmultipath: get_prio(): really don't reset prio for
    inaccessible paths (bsc#1118495)
- Upstream bug fixes from dm-devel (bsc#1139369):
  * multipath: call store_pathinfo with DI_BLACKLIST
  * multipathd: fix REALLOC_REPLY with max length reply
  * libmultipath: make vector_foreach_slot_backwards work as expected
  * multipathd: fix client response for socket activation
   (bsc#1133861)
  * various minor fixes (coverity)

-------------------------------------------------------------------
Tue Apr 30 14:48:40 UTC 2019 - mwilck@suse.com

- Disable kmod() style dependencies again (bsc#1119414)
  * For TW, dependencies will be autogenerated
    (gh#openSUSE/rpm-config-SUSE#3)
  * For SLE, feature is currently rejected (jsc#SLE-3853)
- Update to version 0.8.1+8+suse.8c11498:
  * Avoid deadlock situation during udev settle
  (bsc#1131789, bsc#1125145)
    - multipath -u: test socket connection in non-blocking mode
  * Fix priority handling for offline paths
  (bsc#1118495)
- Update to upstream 0.8.1 (bsc#1148767)
  * Avoid device IO in "multipath -u" (bsc#1125145)
  * multipathd: protect all access to running_state
  (bsc##1110060, bsc#1110439)
  * Improve handling of changed WWIDs and temporary failure
  to obtain WWID. Option "disable_changed_wwids" is now ignored.
  (bsc#1184260)
  * Fixes for PATH_PENDING state handling (bsc#1125043)
  * libmultipath: hwtable: add Lenovo DE series (bsc#1125507)

-------------------------------------------------------------------
Sat Apr 13 19:59:45 UTC 2019 - Jan Engelhardt <jengelh@inai.de>

- Trim %if..%endif guards that do not affect the build result.
- Combine %service_* calls to reduce generated code.
- Make use of %make_install.

-------------------------------------------------------------------
Tue Mar 19 15:58:01 UTC 2019 - Martin Wilck <mwilck@suse.com>

- Re-enable kmod-style dependencies for multipath-tools package
  (bsc#1119414)
- Separate out libmpath0 (bsc#1119414)
- Spec file improvements
  * Add Conflicts: for older multipath-tools to libmpath0
  * Move license files to the libmpath0 package, which contains the
    code with complex licensing. The executables are GPL-2.0 anyway.
  * Remove bogus dependency of -devel package on device-mapper
  * -devel package depends on libmpath0, not multipath-tools
  * Remove %dir %{_defaultlicensedir} for SLE12-SP3 and newer
    (John Vandenberg <jayvdb@gmail.com>)
  * Remove unused /var/cache/multipath directory
  * Remove check for multipath maps in %pre and %post
  * Remove SLE11-specific multipathd service stop / start from
    %pre / %post
  * Remove obsolete tools from package description (bsc#1129827)
  * Add -n to %service_del_{pre,post}un for multipathd.socket

-------------------------------------------------------------------
Fri Mar 15 13:57:44 UTC 2019 - Martin Wilck <mwilck@suse.com>

- Update to version 0.8.0+17+suse.a28893f:
  * Code-identical to 0.7.9+139+suse.ed9d450, except for new
    version number
- Disable kmod() style dependencies for now, as they are causing
  problems with image builds (bsc#1119414). They'd been active
  for SLE15-SP1 only, anyway.
- _service: determine "tag offset" manually, the patch count
  determined by git is far too high.

-------------------------------------------------------------------
Thu Mar  7 16:39:42 UTC 2019 - Martin Wilck <mwilck@suse.com>

- Fix module name in multipath.conf (bsc#1119414)
  * The modules-load.d entry must match the filename exactly

-------------------------------------------------------------------
Thu Mar 07 15:09:30 UTC 2019 - mwilck@suse.com

- Update to version 0.7.9+139+suse.ed9d450:
  * multipath-tools: Build: properly parse systemd's version

-------------------------------------------------------------------
Tue Mar  5 14:12:54 UTC 2019 - Martin Wilck <mwilck@suse.com>

- Add kmod(xyz) style dependencies for SLE15-SP1 
  (jsc#SLE-3853, fate#326579, bsc#1119414)

-------------------------------------------------------------------
Tue Mar 05 09:29:04 UTC 2019 - mwilck@suse.com

- Update to version 0.7.9+138+suse.0edd0a2:
- Include reviewed fixes from upstream
  * libmutipath: continue to use old state on PATH_PENDING
  * libmultipath: disable user_friendly_names for NetApp
  * multipath: blacklist zram devices
  * various fixes for martinal path code
- Bug fixes:
  * multipathd: Fix miscounting active paths (bsc#1125043)
  * multipathd: avoid null pointer dereference in LOG_MSG
  (bsc#1127873)
  * minor fixes suggested by coverity (bsc#1127879)

-------------------------------------------------------------------
Fri Jan 11 20:39:36 UTC 2019 - Martin Wilck <mwilck@suse.com>

- Add BuildRequires on suse-module-tools
  * we need it for regenerate_initrd_posttrans

-------------------------------------------------------------------
Wed Jan 09 14:50:43 UTC 2019 - mwilck@suse.com

- Update to version 0.7.9+111+suse.b4232b7:
- merged upstream cb4a979a (SUSE bug fixes merged upstream,
  code-identical to previous release).

-------------------------------------------------------------------
Tue Jan 08 23:26:41 UTC 2019 - mwilck@suse.com

- Update to version 0.7.9+109+suse.203c1cf:
  * multipathd: avoid crash in cli_list_path (bsc#1121134)
  * libmultipath: fix compilation with older kernel headers
  (bsc#1121066)
- merged upstream fb824725
  * Improved NVMe support in both native and dm-mpath mode
  added basic NVMe ANA support (bsc#1119898, bsc#1118495)
  * Fix prio output in "multipathd show topology" (bsc#1119897)
  * multipathd: fix daemon not really shutdown
  (bsc##1110060, bsc#1110439)

-------------------------------------------------------------------
Fri Dec 14 10:36:39 UTC 2018 - mwilck@suse.com

- Update to version 0.7.9+90+suse.f81e290:
  * libmultipath: Increase SERIAL_SIZE to 128 bytes
  (bsc#1107179)

-------------------------------------------------------------------
Wed Dec 12 22:23:22 UTC 2018 - mwilck@suse.com

- Update to version 0.7.9+89+suse.df77b66:
- re-enable "san_path_err_xy" options
  These have been removed upstream, but they were supported
  in SLE-15/Leap15.0, so we can't simply throw them away.
  Improve documentation, mark them as deprecated, but keep
  the code in place.

-------------------------------------------------------------------
Wed Dec 12 12:50:37 UTC 2018 - mwilck@suse.com

- Update to version 0.7.9+85+suse.766b95e:
  * upstream patch series to make verbosity level 3
    less verbose and thus better usable (bsc#1118937)
  * fix for handling device size mismatch in coalesce_paths()
  (bsc#1037379)
  * libmultipath: fix false removes in dmevents polling code
  (bsc#1116272)
  * Spec file: remove build dependency on dracut which causes
    build errors for some distributions

-------------------------------------------------------------------
Mon Nov 26 16:44:31 UTC 2018 - mwilck@suse.com

- Update to version 0.7.9+58+suse.0790830:
  * libmpathpersist: fix off-by-one error in PRIN length check
  (bsc#1099007)
  * multipathd: fix mpp->hwe handling when paths are freed
  (fix possible crash caused by new hardware table code)

-------------------------------------------------------------------
Wed Nov 14 11:37:32 UTC 2018 - mwilck@suse.com

- Update to version 0.7.9+55+suse.9fc8439:
  (note the "55" is due to former merge operations. We actually
  only have 7 patches on top of upstream. All other patches
  referenced below as "not upstream" have been merged).
  * Bump version to 0.7.9
  * multipathd: reset delay_wait_checks counter on failure
  (bsc#1114771)
  * multipathd: fix irritating "minor number mismatch" message
  (bsc#1111116)
  * fix possible failure to shut down (bsc#1110060, bsc#1110439)
  * upstream "checker overhaul" - cleanups and improvements for
  path checkers
  * Upstream fixes for failures handling path initializiation
  * various small upstream bug fixes.

-------------------------------------------------------------------
Wed Oct 03 11:49:47 UTC 2018 - mwilck@suse.com

- Update to version 0.7.7+136+suse.19bb285:
  Bug fixes from upstream, and SUSE bug fixes
  * multipathd: try SCSI persistent reservations for SCSI only
  (bsc#1108875)
  * libmultipath: allow sysfs_pathinfo to return SKIPPED (bsc#1098458)
  * libmultipath: Fixup updating paths (bsc#1110418)
  * multipathd: fix memory leak on error in configure (bsc#1110418)
  * multipathd: minor fixes (bsc#1110418)
  * multipathd: function return value tweaks (bsc#1110418)
  * multipath: fix max array size in print_cmd_valid (bsc#1110418)
  * libmutipath: don't use malformed uevents (bsc#1110418)
  * libmultipath: fix null dereference int alloc_path_group (bsc#1110418)
  * libmultipath: fix memory issue in path_latency prio (bsc#1110418)
  * libmultipath: fix length issues in get_vpd_sgio (bsc#1110418)
  * multipathd: decrease log level of uevent messages (bsc#1110586)
  * multipathd: fix version check for DM_DEV_ARM_POLL ioctl (bsc#1110587)
  * libmultipath: pathinfo: skip hidden devices (bsc#1110586)
  * libmultipath: nvme: shorter topology output (bsc#1082419)
  * libmultipath: nvme: fix path detection for kernel 4.16 (bsc#1091112)
  * libmultipath: fix gcc 8.1 "truncated output" warnings (bsc#1099007)
  * (lib)mpathpersist: use O_RDONLY file descriptors (bsc#1093220)
  * libmpathpersist: fix byte swapping for big endian systems (bsc#1099036)
  * multipath-tools/tests: add tests for get_unaligned_beXX (bsc#1099036) 
  * libmultipath: add (get|put)_unaligned_be64 (bsc#1099036)
  * libmpathpersist: fix stack overflow in mpath_format_readfullstatus()
  (bsc#1099007)
  * libmpathpersist: fix typo in mpath_format_readfullstatus (bsc#1099007)
  * libmpathpersist: remove duplicate test in readfullstatus (bsc#1099007)

- Update to upstream 1a8625abd (0.7.7+82)
  * minor fixes for kpartx, found by coverity
  * mpathpersist: add --param-alltgpt option
  * libmultipath: add "protocol" blacklist option.
  * multipathd: add new wildcard "%P" for "protocol"
  * multipath-tools: fix products names in hwtable
  * libmultipath: more debug output in alua prioritizer (bsc#1080965)
  * libmultipath: alua: retry RTPG for NOT_READY and UNIT_ATTENTION
 (bsc#1080965)  
  * libmultipath: alua_rtpg: use condlog for error messages (bsc#1080965)
 
-------------------------------------------------------------------
Mon Jul 02 12:01:36 UTC 2018 - mwilck@suse.com

- Update to version 0.7.7+75+suse.6287aef:
  Added minor updates from upstream
  * multipath-tools: add info about how to enable ALUA in ONTAP
  * multipath-tools: add directio path_checker for DASD devices
  * multipath-tools: make Product Name mandatory and add all of them
  Minor rebase, as some SUSE patches have been merged upstream
  (all mentioned in previous changelogs)

-------------------------------------------------------------------
Fri Jun 29 07:57:45 UTC 2018 - mwilck@suse.com

- Update to version 0.7.7+72+suse.4b24466:
 * multipath: fix return code handling in delegate_to_multipathd
  (bsc#1098177)
  * multipath: don't start multipathd unnecessarily (bsc#1098177)

-------------------------------------------------------------------
Mon Jun 25 19:48:59 UTC 2018 - mwilck@suse.com

- Update to version 0.7.7+70+suse.4a5941e:
  * libmultipath: change partition_delimiter default to "-part"
  (bsc#1073622, bsc#1056526)
  * change default for find_multipaths to "greedy" (bsc#1099054)
  * libmultipath: allow distributions to change partition_delim default
  (bsc#1073622, bsc#1056526)

-------------------------------------------------------------------
Mon Jun 25 16:20:23 UTC 2018 - mwilck@suse.com
- Update to version 0.7.7+67+suse.a7d1e14:

- RBD/RADOS backend support has been removed upstream
  remove support for it in SUSE, too (boo#1099037, FATE#826853)
  * added Obsoletes: for multipath-tools-rbd.
- libdmmp version has changed to 0.2.0

- New patches not yet upstream:
  (Wed Jun 12 2018: these are now upstream, since 0.7.8)
  * multipathd: fix mpp->hwe handling on path removal (boo#1099028)
  * libmultipath: print correct default for delay_*_checks
  (boo#1099026, bsc#1110418)
  * libmultipath: avoid error messages from RDAC check
  (bsc#1108728, bsc#1075539)
  * (lib)mpathpersist: use O_RDONLY file descriptors (bsc#1093220)
  * libmpathpersist: fix byte swapping for big endian systems (bsc#1099036)
  * multipath-tools/tests: add tests for get_unaligned_beXX (bsc#1099036)
  * libmultipath: add (get|put)_unaligned_be64 (bsc#1099036)
  * libmpathpersist: fix stack overflow in mpath_format_readfullstatus()
  (bsc#1099007)
  * multipathd: fix buffer size in cli_getprkey (bsc#1099028)
  * libmultipath: fix gcc 8.1 "truncated output" warnings
  (bsc#1099007)
  * libmpathpersist: fix typo in mpath_format_readfullstatus
  (bsc#1099007)
  * libmpathpersist: remove duplicate test in readfullstatus
  (bsc#1099007)

- SUSE specific patches preserved:
  * multipath.rules: temporary rule to obtain ID_WWN for NVMe (bsc#1076828)
  * kpartx: create symlinks for dmraid devices (bsc#1064212)
  * multipath.conf.5: document no_partitons compat support (fate#323406)
  * libmultipath: compat support for 'features "1 no_partitions"' (fate#323406)
  * Added fossology assessment as README.licenses (bsc#1088801)

- Dropped patches from previous factory/SLE15 release (0.7.3+69+suse.218a0d0):
  * libmultipath: don't [un]set queue_if_no_path after domap
  obsoleted by "libmultipath: cleanup features handling code"
  * multipath.rules: use -i flag to multipath
  obsoleted by path detection patch series
  * libmpathpersist: add support for prkeys file v3
  obsoleted by "mpathpersist: Fix invalid condition check"
  * libmultipath: fix deadlock in tur.c
  obsoleted by "libmultipath: fix tur checker locking"
  * checkers/rbd: missing pthread_lock() on failure path
  obsolete because of RBD removal
  * libmultipath/hwtable: don't hard-code ALUA for IBM IPR
  obsoleted by "libmultipath: hwhandler auto-detection for ALUA" and
  "libmultipath: don't reject maps with undefined prio"
  (bsc#1085212, bsc#1075129)

- Update to upstream version 0.7.7+50 (39ad8dc8)
- rework of "find_multipaths" logic
   * find_multipaths can now be "strict", "yes", "no", "greedy", or "smart"
   * SUSE default is "greedy" for now, consistent with previous behavior
   * "multipath -u -i" not necessary in udev rules any more
   (removed SUSE patch "multipath.rules: use -i flag to multipath")
- patch series for config file handling (bsc#1067789):
  * fix inconsistent handling of multiple config file entries
    matching the same device (bsc#1067789)
  * multipath: implement "multipath -T" (bsc#1067789)
  * multipathd: implement "show config local" (bsc#1067789)
  * libmultipath: merge "multipath" config sections by wwid
  * multipathd: add path format wildcard "%0" for failures
  * libmultipath: config parser: Allow '"' in strings
- multipath-tools: foreign/NVME implementation (bsc#1082419) for
  native NVME multipath configurations

- Other new upstream features:
  * mpathpersist: add all_tg_pt option
  * add polling dmevent handler (only one thread waiting for device-mapper
  events rather than one per map).
  * multipath: add "ghost_delay" parameter
  * "marginal path" path state checking for better handling of
    unstable "shaky" connections in a SAN.
    conf options "marginal_path_err_rate_threshold" etc, see man page.
    This replaces the previous "san_path_err_threshold" functionality.

- Upstream bug fixes:
  * Man page corrections and improvements for multipath.conf(5)
  * libmultipath: fix memory leak in process_config_dir() (bsc#1110352) 
  * multipath: don't check timestamps without a path
  * multipathd: handle errors in uxlsnr as fatal (bsc#1086025)
  * libmultipath: don't reject maps with undefined prio (bsc#1085212,
  bsc#1075129)
  * multipathd: fix reservation_key check (bsc#1099008)
  * 11-dm-mpath.rules: dont't run "multipath -U" during coldplug
  (bsc#1084748)
  * libmultipath: hwhandler auto-detection for ALUA
  (bsc#1085212, bsc#1075129)
  * multipath: fix rcu thread cancellation hang (bsc#1110418)
  * multipathd: register threads that use rcu calls (bsc#1110418)
  * multipathd: fix waiter thread cancelling
  * multipathd: use nanosleep for strict timing (avoids possible
  races with SIGALRM)
  * logging fixes:
    * libmultipath: fix log_pthread processing
    * libmultipath: set dm_conf_verbosity
    * libmultipath: fix basenamecpy
  * libmultipath: uev_update_path: update path properties
  * libmultipath: uev_update_path: always warn if WWID changed
  * libmultipath: get_uid: don't quit prematurely without udev
  (bsc#1108728)
  * libmultipath: get_uid: check VPD pages for SCSI only (bsc#1108728)
  * libmultipath: fix wrong output of "multipath -t"
  * Introduce the libmultipath/unaligned.h header file
  (bsc#1099036)
  * libmultipath: Fix sgio_get_vpd() (bsc#1099484)
  * kpartx: Improve reliability of find_loop_by_file()
  * libmultipath, alloc_path_with_pathinfo(): Ensure that pp->wwid is '\0'-terminated
  * libmultipath: enable feature disable changed wwid by default
  * multipathd: add lock protection for cli_list_status
  * bug fixes for "marginal path checker"
  * multipathd: fix signal blocking logic (bsc#1110060, bsc#1110439, 
  bsc#1086025)
  * multipath-tools: add INSPUR/MCS to hardware table
  * multipath-tools: add RDAC SUN/ArrayStorage to hwtable
  * multipath-tools: remove DF arrays from HP
  * multipath: print sysfs state in fast list mode (bsc#1110354) 
  * multipathd: remove coalesce_paths from ev_add_map
  * multipath: fix DEF_TIMEOUT use
  * libmultipath: fix tur checker locking
  * multipath-tools: handle exit signal immediately (bsc#1086025)
  * multipathd: release uxsocket and resource when cancel thread
  (bsc#1110355)
  * path latency prioritizer fixes
  * multipathd.service: set TasksMax=infinity (bsc#1060616)
  * multipathd.service: drop Before=lvm2-lvmetad.service
  (bsc#1070427)
  * multipathd.socket: add WantedBy=sockets.target
  * kpartx.rules: fix by-id/scsi-* for user_friendly_names
  * multipath -C: decrease log level
  * libmultipath: hwtable: no_path_retry="queue" for NetApp NVMe
  * libmultipath: hwtable: multibus for NetApp NVMe-FC
  * libmultipath: select ALUA prioritizer for RDAC arrays only
  (bsc#1075539, bsc#1081241)
  * libmultipath: get_vpd_sgio: support VPD 0xc9  (bsc#1055949)
  * libmultipath: condlog: log to stderr (bsc#1055949)
  * multipath: delegate dangerous commands to multipathdd (bsc#1047639)
  * libmultipath: don't try to set hwhandler if it is retained
  (bsc#1047639)
  * libmultipath: don't update path queueing on reload
  * multipathd: marginal path code fixes
  * multipath: check failed path dmstate in check_path
  * multipathd: clean up set_no_path_retry
  * multipathd: fix device creation issues
  * libmultipath: cleanup features handling code
  * multipath: fix hwhandler check in select_action
  * kpartx: don't delete partitions from partitions
  * limbultipath: prefer RDAC checker with detect_checker
  * multipath-tools: add AccelStor/NeoSapphire to hardware table
  * multipath-tools: add TMS/RamSan to hardware table
  * multipath-tools: add XIV/NEXTRA to hardware table
  * multipath-tools: add XIOtech/Magnitude to hardware table
  * libmultipath: ensure checker->fd == -1 if not set

-------------------------------------------------------------------
Thu Apr 12 19:30:09 UTC 2018 - mwilck@suse.com

- Update to version 0.7.3+69+suse.218a0d0:
  * multipath -ll: print foreign maps only with "-o" flag
  (bsc#1089353)
  * Revert "disable nvme foreign library"

-------------------------------------------------------------------
Thu Apr 12 18:46:24 UTC 2018 - mwilck@suse.com

- Update to version 0.7.3+67+suse.8f0c27b:
  * disable nvme foreign library (bsc#1089353)

-------------------------------------------------------------------
Tue Apr 10 21:42:56 UTC 2018 - mwilck@suse.com

- No functional changes
- Fixed rpmlint warnings (bsc#1088946)
  * multipath-tools-devel: moved .so files to /usr/lib[64]
  * added version dependencies for -devel packages

-------------------------------------------------------------------
Tue Apr 10 21:26:30 UTC 2018 - mwilck@suse.com

- No functional changes
  * fixed SPDX syntax (and -> AND)
  * added /usr/share/licenses

-------------------------------------------------------------------
Tue Apr 10 08:04:40 UTC 2018 - mwilck@suse.com<

- No functional changes, just licenses
- Spec file: fix %license tags and info after closer inspection
  (bsc#1088801)
  * kpartx is under GPL-2.0-only
  * rbd is under LGPL-2.1-only  
- Update to version 0.7.3+66+suse.dc5fe2d: Fix licensing info (bsc#1088801)
  * Added fossology assessment as README.licenses
  * multipath-tools: create LICENSES dir with the text of all used licences

-------------------------------------------------------------------
Fri Apr 06 09:54:45 UTC 2018 - mwilck@suse.com

- Update to version 0.7.3+61+suse.d4d0494:
  * 11-dm-mpath.rules: dont't run "multipath -U" during coldplug
 (bsc#1084748)

-------------------------------------------------------------------
Wed Mar 28 20:31:51 UTC 2018 - mwilck@suse.com

- Fixed license tags in spec file
  * multipath tools / libmultipath is GPL-2.0-only
  * libmpathcmd is LGPL-2.0-or-later
  * libdmmp is GPL-3.0-or-later
  * adopt SPDX format.

-------------------------------------------------------------------
Wed Mar 28 20:01:01 UTC 2018 - mwilck@suse.com

- Update to version 0.7.3+60+suse.46ac839:
  * libmultipath/hwtable: don't hard-code ALUA for IBM IPR
  (bsc#1085212, bsc#1075129)
  
-------------------------------------------------------------------
Wed Mar 21 08:32:13 UTC 2018 - mwilck@suse.com

- Update to version 0.7.3+59+suse.1b6191c26774:
  * libmultipath: don't reject maps with undefined prio (bsc#1085212,
  bsc#1075129)
  * multipathd: handle errors in uxlsnr as fatal (bsc#1086025)

-------------------------------------------------------------------
Tue Mar 20 14:55:34 UTC 2018 - mwilck@suse.com

- Update to version 0.7.3+57+suse.bb6be4c8b4ca:
  * multipathd: fix signal blocking logic (bsc#1086025)
  * multipath-tools: handle exit signal immediately (bsc#1086025)
  * multipath: fix DEF_TIMEOUT use (bsc#1086014)
  * multipath-tools: foreign/NVME implementation v2 (upstream accepted)
    (bsc#1082419)

-------------------------------------------------------------------
Mon Feb 26 12:53:28 UTC 2018 - mwilck@suse.com

- Update to version 0.7.3+53+suse.140f4937e9e7:
  * libmultipath: fix wrong output of "multipath -t" (bsc#1082835)

-------------------------------------------------------------------
Thu Feb 22 20:40:42 UTC 2018 - mwilck@suse.com

- Update to version 0.7.3+52+suse.08a969b7fce0:
- Add limited support for displaying native NVMe multipath
  (bsc#1082419)
  * libmultipath: foreign/nvme: implement path display
  * multipathd: use foreign API
  * multipath: use foreign API
  * libmultipath/foreign: nvme foreign library
  * libmultipath/print: add "%G - foreign" wildcard
  * libmultipath: API for foreign multipath handling
  * libmultipath: print: use generic API for get_x_layout()
  * libmultipath: print: convert API to generic data type
  * libmultipath: "generic multipath" interface
  * libmultipath: add vector_convert()
  * libmultipath: add vector_free_const()
  * libmultipath: get rid of selector "hack" in print.c

- Fix locking errors detected by coverity check (bsc#1082418)
  * checkers/rbd: missing pthread_lock() on failure path
  * libmultipath: fix deadlock in tur.c

-------------------------------------------------------------------
Mon Feb 12 10:55:30 UTC 2018 - mwilck@suse.com

- Fix whitespace in dracut conf file (bsc#1080562)

-------------------------------------------------------------------
Tue Jan 30 20:00:31 UTC 2018 - mwilck@suse.com

- Update to version 0.7.3+38+suse.a16beed5280a:
  * kpartx: don't delete partitions from partitions (bsc#1078362)
  * hwtable: add latest updates (bsc#1078363)
  * multipathd.service: set TasksMax=infinity (bsc#1060616)

-------------------------------------------------------------------
Fri Jan 26 13:52:10 UTC 2018 - mwilck@suse.com

- Update to version 0.7.3+31+suse.6804bb73f72d:
  * libmultipath: hwtable: no_path_retry="queue" for NetApp NVMe
  (bsc#1073319)

-------------------------------------------------------------------
Fri Jan 19 18:09:52 UTC 2018 - mwilck@suse.com

- Update to version 0.7.3+30+suse.6b5ed839:
  * multipath.rules: temporary rule to obtain ID_WWN for NVMe
  (bsc#1076828)
  * libmultipath: ignore natively multipathed NVME devices
  (bsc#1076828)
  * multipath.rules: handle NVME devices (bsc#1076828)
  * FIX "libmultipath: hwtable: multibus for NetApp NVMe-FC"
  (bsc#1073319)
  * libmultipath: increase path product_id/rev field size for NVMe
  (bsc#1073319)

-------------------------------------------------------------------
Tue Jan 16 14:18:15 UTC 2018 - mwilck@suse.com

- Update to version 0.7.3+25+suse.7c9920e2:
  * assemble_map: no newline at end of params string (bsc#1072253)

-------------------------------------------------------------------
Thu Jan 11 12:38:41 UTC 2018 - mwilck@suse.com

- Update to version 0.7.3+24+suse.703a61d5:
  * multipathd.service: drop Before=lvm2-lvmetad.service (bsc#1070427)
  * libmultipath: hwtable: multibus for NetApp NVMe-FC
  (bsc#1073319)
  * libmultipath/propsel: select ALUA prioritizer for RDAC arrays only
  (bsc#1075539, bsc#1081241)
  * libmultipath: get_vpd_sgio: support VPD 0xc9 (bsc#1055949)
  * libmultipath: sgio_get_vpd: add page argument (bsc#1055949)
  * libmultipath: fix return code of sgio_get_vpd() (bsc#1055949)

-------------------------------------------------------------------
Fri Dec 22 20:19:40 UTC 2017 - mwilck@suse.com

- Update to version 0.7.3+19+suse.0fd18bdd:
  * multipathd.socket: add WantedBy=sockets.target (bsc#1072253)

-------------------------------------------------------------------
Fri Dec 22 17:21:57 UTC 2017 - mwilck@suse.com

- Update to version 0.7.3+18+suse.8c97f433:
  * multipath -C: decrease log level (bsc#1072504)

-------------------------------------------------------------------
Fri Dec 22 16:30:47 UTC 2017 - mwilck@suse.com

- Update to version 0.7.3+17+suse.cac42e6f:
  * test-kpartx: add test for mapping without UUID
  (bsc#1074013)

-------------------------------------------------------------------
Wed Nov 29 21:41:37 UTC 2017 - mwilck@suse.com

- Update to version 0.7.3+15+suse.570d5938:
  * kpartx.rules: fix by-id/scsi-* for user_friendly_names
  (bsc#1066893)

-------------------------------------------------------------------
Mon Nov 20 17:59:50 UTC 2017 - mwilck@suse.com

- Update to version 0.7.3+14+suse.da06e7f3:
  * libmultipath: fix return code of sysfs_get_timeout (bsc#1069037)

-------------------------------------------------------------------
Mon Nov  6 14:46:03 UTC 2017 - mwilck@suse.com

- added sample code for libmpathpersist (bsc#1066376)
  * added libmpathpersist-example.c
- multipath-tools.spec: package libmultipath.so symlink in -devel
  package (bsc#1066376). We *do not* package header files for
  libmultipath, as the APIs are not public.

-------------------------------------------------------------------
Fri Nov  3 09:57:57 UTC 2017 - mwilck@suse.com

- multipath-tools.spec: package *.so symlinks in -devel pkgs
  (bsc#1066376)
- multipath-tools.spec: SLE15: add RADOS support for s390x
  (bsc#1066380)
- Fix build error for targets SLE_12, SLE_12_SP1
  (bsc#1066392)

-------------------------------------------------------------------
Thu Oct 26 17:19:39 UTC 2017 - mwilck@suse.com

- Update to version 0.7.3+13+suse.db431514080f:
  * kpartx: create symlinks for dmraid devices (bsc#1064212)
  * limbultipath: prefer RDAC checker with detect_checker
  (bsc#1055949)

-------------------------------------------------------------------
Tue Oct 17 08:54:25 UTC 2017 - hare@suse.com

- Update to version 0.7.3+11+suse.4de08d96:
  * libmultipath: condlog: log to stderr (bsc#1063059)

-------------------------------------------------------------------
Thu Sep 21 12:32:25 UTC 2017 - mwilck@suse.com

- Update to version 0.7.3+10+suse.70ccb55b0439:
- Rebase to upstream release 0.7.3
  * libmultipath: add pthread_cleanup hook for udev monitor
  * libmultipath: pull functions into util.c
  * libmultipath: change reservation_key to a be64
  * libmpathpersist: fix update_prflag code
  * multipath: add alternate reservation_key method
  * mpathpersist: add support for prkeys file
  * multipath-tools: minor edition and corrections in multipath.conf.5
  * multipath-tools: fix incorrect length for strncmp in uevent.c
  * multipath-tools: clarify how to dump the multipathd config
  * multipath-tools: replace "setting: array" with "setting: storage device" at multipath output
  * libmultipath: sanitize fd handling
  * multipath-tools: link internal libraries before foreigns
  * multipath-tools: remove Sun StorEdge T4(6020,6120,6320) arrays from hwtable
  * multipath-tools: add support for all arrays from Sun StorEdge 3000 family
  * multipath-tools: add Xiotech iglu blaze arrays to hwtable
  * multipath-tools: add Dot Hill/Seagate arrays to hwtable
  * libmultipath: update INFINIDAT builtin config
  * multipath-tools: add info about adding new hardware
  * multipath-tools: Remove the limitation of IPC command reply length.
  * multipath-tools: libdmmp: Improve timeout mechanism
  * multipath-tools: libdmmp: New function to flush and reconfig
  * Bump version to 0.7.3
- minor fixes for upstream 0.7.3
  * libmultipath: ensure checker->fd == -1 if not set
  * libmpathpersist: add support for prkeys file v3
  * multipath: add man page info for my prkey changes
- Patch series for NVMe discovery and failover (bsc#1038865)
  * discovery: sanitize NVMe discovery
  * libmultipath/discovery: modify NVMe path states
  * Add 'none' checker
  * hwtable: set 'none' as default checker for NVMe

-------------------------------------------------------------------
Mon Sep 18 21:15:09 UTC 2017 - mwilck@suse.com

- Update to version 0.7.2+49+suse.993a29b1188d:
  * Revert "11-dm-mpath.rules: Remember DM_ACTIVATION" (boo#1059227)
  * Revert "11-dm-mpath.rules: don't set READY->ACTIVATION"
  (boo#1059227)
  * multipath: delegate using libmpathcmd (bsc#1047639)

-------------------------------------------------------------------
Mon Sep 18 20:44:02 UTC 2017 - mwilck@suse.com

- split off rados support into separate multipath-tools-rbd package.
  This avoids pulling in the whole rados/ibverbs/rdma stack with
  multipath-tools. (bsc#1058504).
- multipath-tools-rbd is Recommended but not Required by multipath-tools.

-------------------------------------------------------------------
Sat Sep 02 21:38:13 UTC 2017 - mwilck@suse.com

- Update to version 0.7.2+44.3a8d750c:
  Misc bug fixes:
  * multipathd: don't flood system with sd_notify calls (bsc#1056011)
  * libmultipath: add_feature: skip pointless NULL check (bsc#1055635)
  * libmultipath: add_feature: allow only 1 feature (bsc#1055635)
  * multipath: delegate dangerous commands to multipathd (bsc#1047639)
  * libmultipath: fix partition_delimiter config option (bsc#1056526)
  * kpartx: helper functions for name and uuid generation (bsc#1056508)
  * kpartx: search partitions by UUID, and rename (bsc#1056508)
  * kpartx: fix a corner case when renaming partitions (bsc#1056508)
  * kpartx: -d must work with empty partition table (boo#1056599)
  * kpartx: only recognize dasd part table on DASD (boo#1056599)

Rework of the udev rules related to multipath and kpartx (bsc#1054363):
  * libmultipath: support MPATH_UDEV_NO_PATHS_FLAG on map creation
  * libmultipath: add get_udev_device
  * libmultipath: get_refwwid: use get_udev_device
  * libmultipath: use const char* in some dm helpers
  * libmultipath: add DI_NOIO flag for pathinfo
  * libmultipath: add dm_get_multipath
  * multipath: implement "check usable paths" (-C/-U)
  * 11-dm-mpath.rules: multipath -U for READY check
  * 11-dm-mpath.rules: import more ID_FS_xxx vars from db
  * 11-dm-mpath.rules: no need to test before IMPORT
  * 11-dm-mpath.rules: handle new maps with READY==0
  * 11-dm-mpath.rules: don't set READY->ACTIVATION
  * 11-dm-mpath.rules: Remember DM_ACTIVATION
  * multipath.rules: set ID_FS_TYPE to "mpath_member"
  * kpartx.rules: don't rely on DM_DEPS and DM_TABLE_STATE
  * kpartx.rules: respect DM_UDEV_LOW_PRIORITY_FLAG
  * kpartx.rules: improved logic for by-uuid and by-label links
  * kpartx.rules: create by-partuuid and by-partlabel symlinks
  * kpartx.rules: generate type-name links only for multipath devices
  * kpartx.rules: fix logic for adding partitions
  * multipath/kpartx rules: avoid superfluous scanning
  * kpartx/del-part-nodes.rules: new udev file
  * kpartx.rules: move symlink code to other files

- multipath-tools.spec:
  * added 68-del-part-nodes.rules to support partition deletion
  * added 00-dont-del-part-nodes.rules to disable partition deletion
  by default on openSUSE/SLES for now.
  * added 11-dm-parts.rules to kpartx package
  * added dracut.conf file to make sure 11-dm-parts.rules is included
  in initrd

-------------------------------------------------------------------
Mon Aug 14 21:22:38 UTC 2017 - mwilck@suse.com

- Update to version 0.7.2+14+suse.5721c345:
  * cli_add_map: Use CMD_NONE (bsc#1053515)
  * multipath-tools: link internal libraries before foreigns
  (bsc#1028132)
  * multipathd daemon: Fix incorrect use of CLOCK_MONOTONIC in
  pthread (bsc#1053757)

-------------------------------------------------------------------
Fri Aug 11 21:41:43 UTC 2017 - mwilck@suse.com

- Update to version 0.7.2+11+suse.448921a2:
  * multipath.conf.5: document no_partitions compat support
  * libmultipath: fixup compat support for 'features "1 no_partitions"'

-------------------------------------------------------------------
Fri Aug 11 12:40:17 UTC 2017 - mwilck@suse.com

- Dropped 67-kpartx-compat.rules (SUSE legacy).
  * symlinks "/dev/mapper/${UUID}_part${X}" are not created any more,
    only     "/dev/mapper/${UUID}-part${X}" (with "minus")
- Dropped automatic kpartx invocation on dmraid devices (fate#323743)  
- Rebase to upstream multipath-tools 0.7.2:
  * libmultipath: retain_attached_hw_handler obsolete with 4.3+
  * multipath-tools: move up TEMPLATE in hwtable
  * multipath-tools: delete libdmmp/docs/man directory in make clean
  * libmultipath: fix unit to seconds in log message for checker timeout
  * multipath-tools: add HPE StoreVirtual 3200 family to hwtable
  * multipath-tools: add HPE MSA 2050/2052 to hwtable
  * multipath-tools: add/change fujitsu arrays
  * multipath-tools: check sysfs path state for NVMe/NVMf
  * multipath-tools: sync third-party headers with 3.13 upstream
  * multipath-tools: beautify path_latency.c code
  * multipath-tools: fix format in multipath.conf.5
  * libmultipath: update 3PARdata builtin config
  * Bump version to 0.7.2
- Update to version 0.7.2+8+suse.95e8f43e:
  * libmultipath: don't try to set hwhandler if it is retained
  (bsc#1037533)
  * libmultipath: don't [un]set queue_if_no_path after domap
  * kpartx/devmapper.h: remove dm_no_partitions
  * libmultipath: compat support for 'features "1 no_partitions"' 
  (fate#323406)
  * kpartx.rules: respect DM_UDEV_LOW_PRIORITY_FLAG
  (bsc#1047180)
  * kpartx.rules: Use DM_ACTIVATION as condition (fate#323406)
  * kpartx.rules: skip creating by-uuid and by-label links
  (fate#32340)

-------------------------------------------------------------------
Thu Jul 20 08:01:22 UTC 2017 - mwilck@suse.com

- Update to version 0.7.1+69+suse.3bfa5af1:
  * Merge branch 'sles12-sp3-fixes' into sles12-sp3
  * libmultipath: get_udev_uid: make sure pp->wwid is 0-terminated
  (bsc#1048146)
  * libmultipath: drop uevent_can_discard_by_devpath (bsc#1048052)
  * libmultipath: only listen for uevents with DEVTYPE=disk
  (bsc#1048052)
  * libmultipath: fix over-long NVME WWIDs
  (bsc#1048146)

-------------------------------------------------------------------
Tue Jun 27 18:28:05 UTC 2017 - mwilck@suse.com

- Update to version 0.7.1+64+suse.aabe8c87:
  * Updated "no_path_retry" patchset to v4 (minor change)
  * kpartx.rules: Fix syntax error in skip_kpartx code (bsc#1046092)
- _service: use "match-tag" to refer only to offical tags

-------------------------------------------------------------------
Wed Jun 21 20:41:18 UTC 2017 - mwilck@suse.com

- Update to version 0.7.1+62+suse.62a2c36e:
  * kpartx: only check for 'no_partitions' feature on dm devices
    (bsc#1037533)
  * Revert "kpartx: use mapname if no uuid is present"
    (bsc#1037533, bsc#1033541)
- "no_path_retry" patch series (bsc#1043027)
  * libmultipath: load_config: skip setting unnecessary defaults
  * libmultipath: add/remove_feature: use const char* for feature
  * libmultipath: clarify option conflicts for "features"
  * libmultipath: merge_hwe: fix queue_if_no_path logic
  * libmultipath: assemble_map: fix queue_if_no_path logic
  * multipath.conf.5: document no_path_retry vs. queue_if_no_path
  * multipath.conf.5: Remove ??? and other minor fixes
  * libmultipath: add deprecated warning for some features settings

- _service: Use "sles12-sp3" branch as revision, as factory
  and SLE12-SP3 submissions are in sync. Will be changed when
  factory forks off (latest at SLE12-SP3 GA).

-------------------------------------------------------------------
Tue Jun 20 06:57:53 UTC 2017 - bwiedemann@suse.com

- set KBUILD_BUILD_TIMESTAMP to generate reproducible man-pages
  to fix build-compare (bsc#1045111)

-------------------------------------------------------------------
Wed Jun 14 08:58:23 UTC 2017 - mwilck@suse.com

- Update to version 0.7.1+53+suse.07c2f6ac
- kpartx patch series from upstream (bsc#1037533, bsc#1033541)
  * kpartx: only check for 'no_partitions' feature on dm devices
  * kpartx: test-kpartx: new unit test program
  * kpartx: remove is_loop_device
  * kpartx: relax and improve UUID check in dm_compare_uuid
  * kpartx: dm_remove_partmaps: support non-dm devices
  * kpartx: dm_devn: return error for non-existent device
  * kpartx: don't treat multi-linear mappings as partitions
  * libmultipath: don't treat multi-linear mappings as partitions
  * kpartx: use partition UUID for non-DM devices
  * kpartx: use absolute path for regular files
  * kpartx: find_loop_by_file: use sysfs
  * kpartx: include sys/sysmacros.h
  * Revert "kpartx: relax check when checking for a kpartx device"

- Spec file: use new build flag for libdmmp installation
  (bsc#1036652), enabled by upstream fix:
  * libdmmp: enable library installation in alternative directory

- Other bug fixes from upstream:
  * libmultipath: print.c: make sure lines are 0-terminated (bsc#1038865)
  * multipath-tools: fix compilation with gcc < 4.9
  * kpartx: fix device checks
  * mpath_persist: Don't join threads that don't exist
  * libmultipath: fix suspended devs from failed reloads
  * mpathpersist: fix one more crash possiblity

- Minor upstream changes:
  * multipath: Merge the DELL MD3xxx device configs
  * multipath: fix up position independent code
  * libmultipath: fix partition detection (bsc#1037533)
  * kpartx: default to running in sync mode
  * libmultipath: force udev reloads
  * libmultipath: print alias with no_path_retry message
  * multipathd: force reload device on all resizes
  * libmultipath: refactor calls to get dm device info
  * multipath-tools: document uid_attribute for NVME devices
  * Makefile: Remove assignments to unused variables
  * libmultipath/configure.h: Add a forward declaration
  * libmpathpersist: Add two missing #include directives
  * Remove mpath_reverse_8bytes_order()
  * Move the declaration of mpath_mx_alloc_len to a header file
  * Remove a superfluous "extern" keyword
  * mpathpersist.8: add missing documentation for -K, -C, -l

---------------------------------------------------------------------
Thu Apr 27 18:15:26 UTC 2017 - mwilck@suse.com

- spec file: Disable RADOS support for i586 on Leap 42.x (bsc#1036271)
- spec file: Move libdmmp to /usr/lib[64] (bsc#1036652)
- Update to version 0.7.1+7+suse.3edc5f7d:
  * kpartx: use mapname if no uuid is present (bsc#1033541)
  * kpartx: relax check when checking for a kpartx device (bsc#1033541)
  * libmpathpersist: use extern struct udev (bsc#1027188)
  * kpartx: include sys/sysmacros.h (fix compilation warning)
- Update to upstream version 0.7.1:
  * multipath-tools: improve processing efficiency for addition and deletion of multipath devices
  * uevent_can_discard: optimize devpath check
  * multipathd: fix SIGUSR2 handling
  * multipath-tools: clean up libdmmp/Makefile
  * multipath-tools: libdmmp: Fix incorrect use of __attribute__
  * multipath-tools: Remove trailing whitespaces
  * multipath-tools: add missing "-l" flag for pthread in libdmmp/Makefile
  * multipath-tools: build objects for libdmmp and libmpathpersist independently
  * libdmmp: minor Makefile cleanup
  * multipath-tools: remove incdir from Makefiles
  * libdmmp: don't disconnect from multipathd twice
  * multipathd: don't call strlen on NULL variables
  * libdmmp: move libdmmp.pc install location
  * multipathd: drop lock before calling uev_add_path
  * multipathd: allow devices to switch from RW to RO
  * libmultipath: don't set max_sectors_kb on reloads
  * Remove a trailing tab
  * multipath: fix segfault with disable_changed_wwids
  * multipath-tools: amend text from multipath/multipath.conf.5
  * Bump the version code and date
  * multipath-tools: replace multipath configuration output
  * Revert "multipathd: set timeout for CLI commands correctly"
  * libmultipath: fix skip_kpartx support for removing maps
  * Bump version to 0.7.1

-------------------------------------------------------------------
Fri Mar 24 09:59:17 UTC 2017 - mwilck@suse.com

- spec file changes suggested by factory review team (bsc#1030699)
  * RPM group adjustments.
  * Avoid %__ macro indirections

-------------------------------------------------------------------
Thu Mar 23 13:23:01 UTC 2017 - mwilck@suse.com

- Enable rados for SLES only for x86_64 and aarch64 (ceph is currently
  disabled on SLES on s390x and ppc64le) (bsc#1030699)
- Downgrade to version 0.6.4+103+suse.bcb5d0f4:
  * temporarily remove commit "multipathd: fix SIGUSR2 handling"
  until it's merged in official repo (bsc#1030699)

-------------------------------------------------------------------
Tue Mar 21 11:49:06 UTC 2017 - mwilck@suse.com

- Spec file: disable librados for architectures for which ceph
  is not built
- Spec file: enable librados by default for SLES12 SP3, disable
  it on Leap <= 42.1
- Update to version 0.6.4+104+suse.ac0df678:
  * multipathd: fix SIGUSR2 handling

-------------------------------------------------------------------
Fri Mar 10 13:04:05 UTC 2017 - mwilck@suse.com

- Update to version 0.6.4+103+suse.bcb5d0f4:
  * changed to official github repo openSUSE/multipath-tools
    (no changes code-wise)

-------------------------------------------------------------------
Fri Mar 10 11:23:40 UTC 2017 - mwilck@suse.com

- Spec file: Added dependency on sg3_utils (boo#1028857)

-------------------------------------------------------------------
Wed Mar 01 15:43:09 UTC 2017 - mwilck@suse.com

- spec file changes: optional librados and libdmmp support
  * enabled by default on Factory and Leap
    (disable with --without-rados, --without-libdmmp)
  * disabled by default on SLES12
    (enable with --with-rados, --with-libdmmp)
  * libdmmp0_1_0 and libdmmp-devel as separate packages
  * minor fixes for RPMLINT warnings
- Update to version 0.6.4+102.0119472d:
  * rebased, code-wise identical to previous checkout

-------------------------------------------------------------------
Tue Feb 28 11:26:01 UTC 2017 - mwilck@suse.com

- Update to version 0.6.4+102.df7d367e:
  * libmultipath/propsel: Do not select sysfs prioritizer for RDAC arrays
    (bsc#1004858)

-------------------------------------------------------------------
Tue Feb 28 10:29:31 UTC 2017 - mwilck@suse.com

- Update to version 0.6.4+101.f01ef4da (SLES12 SP2 changes wrt upstream):
  * Make libdmmp build optional
  * multipath.rules: use -i flag to multipath
  * kpartx: create symlinks for dmraid devices
  * kpartx: Add udev compability rules for SUSE
  * libmultipath/checkers: make RADOS checker optional
  * multipathd: fixup check for new path states (bsc#1019798)
  * tur: Add pthread_testcancel() (bsc#101979)
  * kpartx: sanitize delete partitions (bsc#100869)
  * libmultipath: coalesce_paths: trigger uevent if nothing done
    (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
  * libmultipath: differentiate ACT_NOTHING and ACT_IMPOSSIBLE
    (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
  * libmultipath: reload map if not known to udev
    (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
  * libmultipath: sysfs_attr_set_value: use const char*
    (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
  * libmultipath: select_action: check special features separately
    (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
  * libmultipath: disassemble_map: treat aminio like assemble_map does
    (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
  * libmultipath: disassemble_map: skip no_path_retry check
    (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
  * libmultipath: setup_feature: handle "retain_attached_hw_handler"
    (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
  * libmultipath: setup_feature: print log msg if no_path_retry cant be set
    (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
  * libmultipath: setup_features: log msg if queue_if_no_path is ignored
    (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
  * multipathd: use weaker "force_reload" at startup
    (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
  * multipathd: imply -n if find_multipaths is set (bsc#1012910)
  * multipath: ignore -i if find_multipaths is set (bsc#1012910)
  * libmultipath: move suspend logic to _dm_flush_map (bsc#986838)
  * multipath -ll: set DI_SERIAL (bsc#991432)
  * libmultipath: use existing alias from bindings file (bsc#1005255)
  * libmultipath/discovery: do not cache 'access_state' sysfs attribute (bsc#1004858)
  * multipathd: issue systemd READY after initial configuration (bsc#1006469)
  * multipath: avoid crash when using modified configuration (bsc#1000914)
  * multipathd: Set CLI timeout correctly (bsc#999061)
  * libmultipath: Do not crash on empty features (bsc#994812)
  * libmultipath: fall back to search paths by devt (bsc#995645)
  * multipathd: set timeout for CLI commands correctly (bsc#999061)
  * Invalid error code when using multipathd CLI
  * multipath: do not check daemon from udev rules (bsc#986734)
  * Add support for "multipath=off" and "nompath" on kernel cmdline
  * multipathd: start daemon after udev trigger (bsc#98673)
  * multipathd.service: fixup Wants= and Before= statements (bsc#1019181, bsc#991742, bsc#986734)

- Update to current upstream (0.6.4-65-ga2675025)
  * Avoid that reloading a map sporadically triggers I/O errors
  * fix udev rules for failed multipath devices
  * multipathd: allow resetting stats
  * multipathd: add messages on delayed path addition
  * multipathd: don't update priority of failed paths
  * libmultipath: cleanup orphan device states
  * libmultipath: add detect_checker option
  * kpartx: don't keep creating recursive partitions
  * multipath-tools: Introducing multipath C API
  * multipath-tools: sync valgrind.h with 3.12 upstream
  * multipath-tools: add availability of service-time and queue-length to multipath.conf.5
  * multipath-tools: add availability of service-time and queue-length to multipath.conf.5
  * Fill NVMe specific path info
  * Don't blacklist nvme
  * multipath-tools: fix misspellings
  * multipath-tools: git should ignore rej and orig files
  * Include sys/sysmacros.h
  * Tolerate modprobe failures in multipathd.service
  * multipath-tools: Remove trailing and leading whitespaces
  * multipath-tools: Perform socket client uid check on IPC commands.
  * multipath-tools: Set errno mpath_recv_reply() when failure
  * multipath-tools: New way to limit the IPC command length.
  * multipath-tools: libmultipath: Removed unused functions.
  * multipath-tools: libmultipath: fix gcc link failure on rcu_register_thread_mb.
  * multipath-tools: multipathd: Fix memory leak on load_config().
  * [multipathd] Remove trailing whitespaces
  * multipathd: deterministic io throughput in multipath

-------------------------------------------------------------------
Sat Feb 18 22:04:25 UTC 2017 - kukuk@suse.com

- Remove superfluous PreReq for insserv and fillup

-------------------------------------------------------------------
Thu Sep 29 06:04:00 UTC 2016 - mwilck@suse.com

- Update to version 0.6.2+suse20160928.8939fb6

-------------------------------------------------------------------
Thu Sep 29 08:03:04 CEST 2016 - hare@suse.de

- Implement support for 'multipath=off' and 'nompath'
  kernel commandline options (bsc#1001691)

-------------------------------------------------------------------
Wed Sep 28 13:26:55 CEST 2016 - hare@suse.de

- multipath: avoid crash when using modified configuration
  (bsc#1000914)

-------------------------------------------------------------------
Mon Sep 19 10:55:20 CEST 2016 - hare@suse.de

- libmultipath: Do not crash on empty features (bsc#994812)
- multipathd: Set CLI timeout correctly (bsc#999061)
- Moved multipath-tools repository to
  github.com:/openSUSE/multipath-tools.git

-------------------------------------------------------------------
Thu Sep  8 14:23:16 CEST 2016 - hare@suse.de

- Fixup glitch from patch 'fixup check from udev rules' (bsc#986734)
- Remove 0001-libmultipath-fall-back-to-search-paths-by-devt.patch;
  integrated into git repository

-------------------------------------------------------------------
Mon Aug 29 10:32:36 UTC 2016 - jthumshirn@suse.com

- libmultipath: fall back to search paths by devt (bsc#995645)

-------------------------------------------------------------------
Fri Aug 26 18:52:03 CEST 2016 - hare@suse.de

- Fixup module name in /usr/lib/modules-load.d (bsc#986734)

-------------------------------------------------------------------
Fri Aug 26 09:10:50 CEST 2016 - hare@suse.de

- multipath: fixup check from udev rules (bsc#986734)

-------------------------------------------------------------------
Wed Aug 24 12:58:32 CEST 2016 - hare@suse.de

- multipathd: start daemon after udev trigger (bsc#986734)
- Load device handler and multipath module at boot (bsc#991634)

-------------------------------------------------------------------
Fri Aug 19 15:28:48 CEST 2016 - hare@suse.de

- Do not check daemon from udev rules (bsc#986734,bsc#990538)

-------------------------------------------------------------------
Fri Aug  5 09:02:21 CEST 2016 - hare@suse.de

- Include fixes from upstream:
  * memory leak in orphan_paths
  * More hardware table cleanups
  * Add 'serial' keyword to weightedpath prioritizer
- Set timeout for CLI commands correctly (bsc#990265)
- Start daemon after udev trigger (bsc#991742,bsc#986734,bsc#990538)
- multipathd.service: Fixup Wants= and Before= statements
  (bsc#991742, bsc#986734)

-------------------------------------------------------------------
Thu Jul 28 15:57:12 CEST 2016 - hare@suse.de

- Include patches from upstream:
  * Cleanup hardware tables by removing default entries
  * More formatting fixes
  * Order keywords in multipath.conf.5
  * Change default pgpolicy from 'failover' to 'group_by_prio'
  * kpartx: Fix check whether to detach a loop device
  * Fix partly traversed loop in coalesce_paths()
  * Fix memory leak in reconfigure()
  * Cleanup include header files
  * Bump version code to 0.6.2
- Fix multipath -l <devmap> without output (bsc#990480)
- Fix spelling in a log message
- Fix type of rcu_unregister()
- Do not perform POSIX mutex operations inside a signal handler
- Ensure that signals are delivered to the uxsock thread
- Fix memory leak in path group policies
- Update tarball to 0.6.2+suse20160728.d96f423

-------------------------------------------------------------------
Fri Jul 15 10:46:34 CEST 2016 - hare@suse.de

- Include patches from upstream:
  * Makefile cleanup
  * Update multipath.conf.5
  * Update hardware tables
  * Whitespace cleanup
- Fixup crash during shutdown (bsc#988539)
- Update tarball to 0.6.1+suse20160715.3d44636

-------------------------------------------------------------------
Mon Jul  4 22:30:43 UTC 2016 - jengelh@inai.de

- Remove obsoletes spec sections

-------------------------------------------------------------------
Mon Jul  4 09:47:21 CEST 2016 - hare@suse.de

- Move config accesses to use user-space RCU (bsc#987526)
  * Revert 'move filter_devnode under vector lock'
  * Revert the rework patch
- Include patches from upstream:
  * Update hardware tables
  * Update kpartx manpage
  * Whitespace fixes
  * Include coverity fixes
  * Drop AUTHOR file
- Update tarball to 0.6.1+suse20160704.6e52398

-------------------------------------------------------------------
Wed Jun  8 08:33:48 UTC 2016 - lnussel@suse.de

- fix service file to not pretend that this is the upstream version.
  Now labeled 0.6.1+suse20160603.9b920e3
- Fix BuildRequire to get systemd.pc from correct package (bsc#983167)
- point rcmultipathd to /usr/sbin/service to avoid dangling symlink warning

-------------------------------------------------------------------
Fri Jun  3 08:58:52 CEST 2016 - hare@suse.de

- Rework patch 'move filter_devnode under vector lock'
  (bsc#982348)

-------------------------------------------------------------------
Mon May 30 08:52:53 CEST 2016 - hare@suse.de

- multipathd: Fixup definition of set_unlocked_handler_callback()
- mpathcmd.h: Update Free Software Foundation address

-------------------------------------------------------------------
Fri May 27 10:02:28 CEST 2016 - hare@suse.de

- Do not install header file with mode 755

-------------------------------------------------------------------
Wed May 25 17:20:32 CEST 2016 - hare@suse.de

- Update to latest upstream version 0.6.1
  * Merge suse-specific patches
  * Drop multipath.conf.* files
  * Update to version 0.6.1
  * multipathd: move 'filter_devnode' under vector lock
  * libmultipath: use poll() in uevent_listen()
  * Increase kpartx retries
  * Merge Dell MD3XXX hardware table entries
  * multipathd: Add 'sysfs' prioritizer (bsc#927040)
  * libmultipath: call get_vpd_uid() if no uid_attribute is set
  * multipathd: update defaults

-------------------------------------------------------------------
Fri May  6 15:18:22 CEST 2016 - hare@suse.de

- Update to latest upstream version 0.6.0 (FATE#319406)
  * Update documentation
  * Fix memory leak and segfault in reconfigure
  * Add wwn keyword to weightedpath prioritizer
  * Use 64-bit int for command key
  * check partions unused before removing
  * print 'fail' when remove fails
  * add exclusive_pref_bi for alua prioritizer
  * kpartx: verify parition devices
  * multipathd: delay reloads during creation
  * Cut down alua prioritizer ioctls
  * Add 'ignore_new_boot_devs' option
  * Add libmpathcmd library and use it internally
  * retrigger uevents to try and grab uid
  * Update to version 0.6.0

-------------------------------------------------------------------
Fri Apr 15 12:45:41 CEST 2016 - hare@suse.de

- Port to latest upstream version (FATE#319406, FATE#320255)
  * kpartx: support device names with spaces
  * add raw format multipathd commands
  * make kpartx -d remove all partitions
  * Add find_multipaths option
  * Autodetect ALUA CLARiiON configurations
  * Delayed path reintegration
  * enable configuration directory
  * read-only bindings
  * Add deferred_remove support
  * correctly set partition delimiter on rename
  * Add overrides section to multipath.conf
  * Add additional path wildcards
  * Add force_sync option
  * Misc small patches

-------------------------------------------------------------------
Thu Mar 24 09:49:45 CET 2016 - hare@suse.de

- multipathd: do not flush maps on startup
- Use find_path_by_dev() where possible (bsc#924316)
- Fixup error return in store_path() (bsc#972329)
- Do not display message 'invalid fd'

-------------------------------------------------------------------
Tue Mar  8 10:57:07 CET 2016 - hare@suse.de

- Fixup overzealous warning 'empty device number' (bsc#969857)

-------------------------------------------------------------------
Wed Feb 17 15:53:26 CET 2016 - hare@suse.de

- multipathd: fixup signal handling (again)
- Revert 'trigger all devices on startup'
- multipathd: print error message for invalid arguments
- multipathd: block checkerloop during reconfiguration (bsc#946658)
- libmultipath: correctly initialize pp->sg_id
- multipathd: don't buffer output with systemd (bsc#954726)
- multipath.rules: Do not forward partition events (bsc#954726)
- libmultipath: improve uxlsnr handling (bsc#954726)
- multipathd: do not realloc memory in uxlsnr (bsc#954726)
- libmultipath: call get_uid() for all paths (bsc#935312)
- multipathd: Do not print misleading message 'not found in pathvec'
- multipathd: Do not update the paths vec when removing paths
- multipathd: Do not switch paths on empty multipath tables (bsc#956349)
- libmultipath: remove 'get_info' argument for adopt_paths()
- libmultipath: ensure 'dev_t' is set when store paths (bsc#924316)
- libmultipath: Do not store paths with empty dev_t (bsc#924316)
- libmultipath: Do not store paths with empty device name (bsc#924316)
- libmultipath: sysfs_set_rport_tmo still wrong (bsc#926588)
- Add LIO-ORG/SUSE RBD backend hardware defaults (bsc#947845)
- multipath: Reset alias if renaming fails (bsc#943157)

-------------------------------------------------------------------
Fri Nov  6 13:35:22 CET 2015 - hare@suse.de

- Fixes for md_monitor on zFCP (FATE#319070):
  * strict loop timings
  * multipathd: fixup a crash when invoking CLI commands
  * multipathd: implement 'show map $map format $format

-------------------------------------------------------------------
Tue Aug 25 11:58:21 CEST 2015 - hare@suse.de

- Fixup hang in 'multipath -f' (bsc#941954)

-------------------------------------------------------------------
Mon Aug  3 11:48:54 CEST 2015 - hare@suse.de

- Create package for SLE12-SP1.
  * Remove multipath-tools-0.5.0-sles12.diff.bz2
  * Add multipath-tools-0.5.0-sles12-sp1.diff.bz2
- kpartx: parse emulated DASD devices
- multipathd: Fixup queueing mode in 'show maps status' (bsc#933885)
- multipathd: Accept zero-sized paths in ev_add_path
- Always set DM_UDEV_DISABLE_LIBRARY_FALLBACK (bsc#933282)
- libmultipath: Fixup 'DM_DEVICE_RELOAD' handling (bsc#933282)
- libmultipath: correctly display checker status

-------------------------------------------------------------------
Wed Apr  8 11:00:43 CEST 2015 - hare@suse.de

- Remove 'udev_sync' argument from dm_simplecmd (bsc#903001)
- Ensure multipathd is started before systemd-udev-trigger

-------------------------------------------------------------------
Tue Apr  7 10:18:24 CEST 2015 - hare@suse.de

- Only import ID_FS_XXX variables if not set (bsc#909358)
- Fixup regular expression for HP MSA 2040 (bsc#920189)

-------------------------------------------------------------------
Wed Mar 18 12:53:32 CET 2015 - hare@suse.de

- Add dependency on systemd-udevd.service (bsc#903001)
- Use ALUA for HP 3PAR (bsc#922105)
- Add DX8700 S3 and DX8900 S3 defaults (bsc#921703)
- Load all device handler modules on startup (bsc#908529)

-------------------------------------------------------------------
Fri Mar 13 13:59:19 CET 2015 - hare@suse.de

- libmultipath: make vpd page 0x80 optional (bsc#917963)
- Add HP MSA 2040 to the hardware table (bsc#920189)
- Revert 'Skip unhandled device types' (bsc#917701)

-------------------------------------------------------------------
Thu Jan 29 13:02:08 CET 2015 - hare@suse.de

- skip uninitialized devices during reconfiguration (bnc#908915)
- memory overflow when printing help text (bnc#909742)

-------------------------------------------------------------------
Tue Dec 16 11:54:47 CET 2014 - hare@suse.de

- Do not automatically fall back to vpd uid generation
- Improve vpd parsing
- multipathd: trigger all devices on startup (bnc#901465)
- Unset 'uid_attribute' on failure

-------------------------------------------------------------------
Wed Dec 10 09:43:29 CET 2014 - hare@suse.de

- libmultipath: Fall back to SG_IO if no UID could be assigned
  (bnc#908915)
- Assign local priority for NAA VPD descriptor (bnc#907483)
- libmultipath: finally fix dev_loss_tmo setting (bnc#889927)
- libmultipath: Do not use 'sscanf' for parsing integers (bnc#889927)
- devmapper: do not flush I/O for DM_DEVICE_CREATE (bnc#901809)
- kpartx: handle more than 256 loop devices (bnc#898427)
- multipathd: fixup locking in uev_remove_map() (bnc#901891)
- multipathd: use global variable for uxsock timeout (bnc#900758)
- multipathd: remove unused variable in cli_reconfigure()
- Add %service calls for multipathd.socket

-------------------------------------------------------------------
Mon Sep 22 11:02:53 CEST 2014 - hare@suse.de

- Really fix segfault in recv_packet (bnc#896678)
- Allow empty revision during discovery (bnc#896864)

-------------------------------------------------------------------
Wed Sep 17 14:04:47 CEST 2014 - hare@suse.de

- Fix segfault in recv_packet (bnc#896678)

-------------------------------------------------------------------
Wed Sep  3 12:23:01 CEST 2014 - hare@suse.de

- Fixup segfault due to double unlock
- Skip USB devices during discovery (bnc#865577)
- Ignore devices when sysfs_get_tgt_nodename fails (bnc#865577)
- Use sysfs attribute vpd_pg80 to read serial number

-------------------------------------------------------------------
Wed Sep  3 08:27:29 CEST 2014 - hare@suse.de

- Create rcmultipathd links (bnc#894513)
- multipathd: fix segfault in checkerloop() (bnc#894513)
- Use regenerate_posttrans rpm macros (bnc#892181)

-------------------------------------------------------------------
Tue Sep  2 16:51:23 UTC 2014 - trenn@suse.de

- Do not call mkinitrd in rpm macros directly, make use of
  %{?regenerate_initrd_posttrans} and %{?regenerate_initrd_post}
  instead to avoid rebuilding of initrd for each package that
  needs initrd recreation. Only update initrd once per install/update
  if needed

-------------------------------------------------------------------
Fri Aug 29 12:00:49 CEST 2014 - hare@suse.de

- Fixup segfault during uev_path_add() (bnc#892214)

-------------------------------------------------------------------
Thu Aug 21 12:16:53 CEST 2014 - hare@suse.de

- Revert to ACT_RELOAD in domap() if the map exists
- multipathd: asynchronous configuration (bnc#891189)
- multipathd: timeout CLI commands when waiting for lock
  (bnc#891189)
- Remove dm_udev_XXX wrapper functions
- uxlsnr: use typedef for trigger function
- multipathd: lock cli client list
- multipathd: Use standard lists for CLI handling

-------------------------------------------------------------------
Tue Aug 19 12:33:19 CEST 2014 - hare@suse.de

- Use strlen() when checking for valid wwid
- kpartx: zero out cookie (bnc#890902)
- multipathd: Check for empty wwid when processing events
  (bnc#892214)

-------------------------------------------------------------------
Mon Aug 18 16:24:05 CEST 2014 - hare@suse.de

- Fixup device-mapper cookie handling yet again (bnc#890902)
- Allow zero-sized devices during configuration
- multipathd: issue warning on CLI command timeout (bnc#891189)

-------------------------------------------------------------------
Wed Aug 13 20:04:34 CEST 2014 - hare@suse.de

- Do not remove paths without uevent (bnc#890998)

-------------------------------------------------------------------
Tue Aug 12 10:47:21 CEST 2014 - hare@suse.de

- Fixup structure misalignment in config.h (bnc#890747)
- Do not print empty multipaths section
- Fixup 'uxsock_timeout' handling
- Reload map if reinstate failed (bnc#890854)

-------------------------------------------------------------------
Mon Aug 11 17:03:25 CEST 2014 - hare@suse.de

- Close memory leak in print_multipath_topology
- Implement 'uxsock_timeout' keyword (bnc#890551)
- Return error when receiving CLI packet (bnc#890551)
- multipath: do not print state 'orphan' for option '-l' (bnc#890551)
- Fix race conditions during uevent processing (bnc#890994)

-------------------------------------------------------------------
Tue Aug  5 12:34:04 CEST 2014 - hare@suse.de

- Skip unhandled device types (bnc#881125)
- use 'uid_attribute' per default when generating WWID (bnc#881125)
- Use a default dev_loss_tmo of 600 (bnc#889927)
- Fixup device-mapper 'cookie' handling (bnc#886743)
- Remove last argument from verify_paths()
- Add paths with a size of '0' as 'ghost' paths
- Remove sysfs_get_dev()
- Use glibc 'major' and 'minor' macros
- Whitespace cleanup in mpath_persist

-------------------------------------------------------------------
Mon Jul 28 10:18:43 CEST 2014 - hare@suse.de

- Fixup wrong check for errno in uevent_listen()
  (bnc#889165)
- Terminate uevent listener on ppoll() error (bnc#889165)

-------------------------------------------------------------------
Fri Jul 25 10:53:27 CEST 2014 - hare@suse.de

- Patches from upstream:
  * enable gcc format-security check
  * Accept "*" as a valid regular expression
  * check info.exists to get valid value
  * Don't forget to reload table when both reload and rename
    is required
  * libmultipath: Simplify read_line()
  * libmultipath: Zero-terminate sysfs_attr_get_value() result
  * libmultipath: Print line number for which parsing failed
  * libmultipath: Accept "*" as a valid regular expression
  * multipath: Wrong sysfs attribute used for iSCSI settings
    (bnc#883808)
- Check for valid DM_DEVICE_INFO before proceeding
  (bnc#888453)
- Scalability fixes (bnc#880356):
  * Separate out uevent parsing functions
  * Use poll() when receiving uevents
  * multipathd: push down lock in checkerloop()
  * Allow specific CLI commands to run unlocked
  * Push down vector lock during uevent processing

-------------------------------------------------------------------
Wed Jul 23 12:35:44 CEST 2014 - hare@suse.de

- recovery_tmo for iSCSI sessions not updated (bnc#883808)
- Only filter for udev property if uid_attribute is present
- Read wwid from sysfs vpg_pg83 attribute
- Update multipath.conf.5 to clarify wwid generation
- kpartx: Fixup persistent name generation (bnc#887582)
- Revert 'return PATH_DOWN for quiesced paths'
- Do not treat 'transport-offline' paths as 'offline' (bnc#888378)

-------------------------------------------------------------------
Wed Jul  9 11:46:23 CEST 2014 - hare@suse.de

- multipath: Check for running daemon when called with '-u'
  (bnc#886154)

-------------------------------------------------------------------
Fri Jul  4 09:14:11 CEST 2014 - hare@suse.de

- multipath: use option '-i' when called from udev (bnc#885628)
- multipath: add option '-i' to ignore wwids file (bnc#885628)
- Update hwtable for EMC XtremIO (bnc#880510)
- Remove unused variable 'aas' from alua prioritzer
- Patches from upstream:
  * Add multipath.conf force_sync option
  * make prioritizers use checker_timeout, if set
  * Improve multipath.conf syntax checking
  * orphan paths on failed add
  * Add missing interactive commands to multipathd man page
  * Make multipathd orphan paths that were removed externally
  * allow users to add wwids to /etc/multipath/wwids with -a
  * change conf->dry_run to conf->cmd
  * Return the correct size buffer in set_value()
  * Fix memory issues in path reordering failure code paths

-------------------------------------------------------------------
Tue Jun 24 09:45:57 CEST 2014 - hare@suse.de

- Fixup race condition with udev (bnc#883878)
- Cleanup foreground operation handling in multipathd
- Fix some minor issues in path reordering code (bnc#870465)
- Patches from upstream:
  * Use existing user friendly names if possible
  * kpartx: fix extended partition size for >512b sectors
  * Mismatch between allocation length and transfer length in
    rdac prio
  * Mismatch between allocation length and transfer length in
    emc_clariion prio.

-------------------------------------------------------------------
Fri Jun 13 10:51:48 CEST 2014 - hare@suse.de

- 11-dm-mpath.rules: Import blkid values if all paths are down
  (bnc#875233)
- kpartx.rules: Skip kpartx for multipath events (bnc#875233)

-------------------------------------------------------------------
Tue May 20 12:36:57 CEST 2014 - hare@suse.de

- Fix race condition with systemd (bnc#878809)

-------------------------------------------------------------------
Fri May 16 10:26:03 CEST 2014 - hare@suse.de

- Fix segfault when fast_io_fail_tmo is empty in config file
- Crafted ordering of child paths for round robin path selector
  (bnc#870465)
- multipath: enable sync support (bnc#872297)
- Whitelist devices in multipath.rules (bnc#877281)

-------------------------------------------------------------------
Fri Apr 11 12:23:29 CEST 2014 - hare@suse.de

- Install multipath rule under 56-multipath.rules (bnc#873151)
- Implement option '-u' for uevents (bnc#873151)
- Remove trailing linefeed from sysfs attributes
- Make checker_put() and prio_put() idempotent
- Implement 'list path' CLI command
- Disable reassign maps per default
- Allow for NULL path when printing information
- Fixup wwid blacklist printing
- Use SCSI_IDENT_.* as the default property whitelist (bnc#872929)
- Do not call 'blkid' in kpartx.rules
- Allow empty wwids during discovery (bnc#872712)
- Always set verbosity to '0' when checking devices (bnc#867840)
- Fixup multipath rules for booting (bnc#870764)
- Fixup dependencies in multipathd.service (bnc#872712)
- Do not print empty device strings during discovery (bnc#872712)
- Use multipath wwid if path wwid is empty (bnc#872712)
- Set the correct PID when running in debug mode

-------------------------------------------------------------------
Fri Mar 21 12:28:10 CET 2014 - hare@suse.de

- Fixup ordering cycle with systemd (bnc#863218)
- Rebase git repository to match with upstream
- Revert 'display uevent sequence number'; not required anymore

-------------------------------------------------------------------
Thu Mar 13 00:56:11 CET 2014 - ro@suse.de

- downgrade device-mapper requirement to 1.2.78 until 1.2.82
  is available anywhere

-------------------------------------------------------------------
Wed Mar 12 16:36:56 CET 2014 - hare@suse.de

- Update FSF address
- Add 11-dm-mpath.rules (bnc#867968)
- Link against libsystemd instead of libsystemd-daemon

-------------------------------------------------------------------
Fri Feb 28 15:53:24 CET 2014 - hare@suse.de

- Fixup spec file to correct rules permissions

-------------------------------------------------------------------
Fri Feb 28 12:45:19 CET 2014 - hare@suse.de

- Fixup 40-multipath.rules installation

-------------------------------------------------------------------
Wed Feb 26 14:38:49 CET 2014 - hare@suse.de

- Add 40-multipath.rules for dracut support

-------------------------------------------------------------------
Fri Feb 14 14:55:28 CET 2014 - hare@suse.de

- Install kpartx rules with correct prefix for dracut
- filter for missing property in get_refwwid() (bnc#862250)
- Double uevent stacksize yet again (bnc#855379)
- do not fail discovery on individual devices (bnc#860850)
- Prefer deprecated 'getuid' callout (bnc#861534)
- Skip paths with empty wwid (bnc#861534)
- correctly terminate string in strlcpy() (bnc#861534)
- Don't chop const strings
- Fixup typo in Makefile
- display uevent sequence number on 'show daemon'

-------------------------------------------------------------------
Tue Jan 21 16:32:33 CET 2014 - hare@suse.de

- Fixup build issues

-------------------------------------------------------------------
Tue Jan 21 13:58:15 CET 2014 - hare@suse.de

- Update to official version 0.5.0
  - remove: multipath-tools-0.4.9.tar.bz2
  - remove: multipath-tools-0.4.9-opensuse-12.3.diff.bz2
  - add: multipath-tools-0.5.0.tar.bz2
  - add: multipath-tools-0.5.0-sles12.diff.bz2
- Merge:
  - multipath-tools-make-flexible-install-of-systemd-and-udev-files.patch

-------------------------------------------------------------------
Tue Apr 16 10:08:18 UTC 2013 - idonmez@suse.com

- Add Source URL, see https://en.opensuse.org/SourceUrls
  - use %setup -c to support the tarball

-------------------------------------------------------------------
Fri Feb 15 13:55:24 UTC 2013 - cfarrell@suse.com

- license update: GPL-2.0
  Substantial number of GPL-2.0 files in the package

-------------------------------------------------------------------
Fri Feb 15 12:15:09 UTC 2013 - rmilasan@suse.com

- Make installation of systemd unit and udev files more flexible.
  add: multipath-tools-make-flexible-install-of-systemd-and-udev-files.patch

-------------------------------------------------------------------
Fri Feb  1 10:29:11 CET 2013 - hare@suse.de

- Update to latest mainline git version
- Merge systemd fixes
- Generate persistent device names for kpartx (bnc#799274)

-------------------------------------------------------------------
Sun Aug 26 02:05:37 UTC 2012 - crrodriguez@opensuse.org

- Systemd: use default service type instead of forking
- Systemd: fix spec pre/post scripts.

-------------------------------------------------------------------
Tue Jul 17 13:21:47 UTC 2012 - rmilasan@suse.com

- Drop patch 0001-multipath.rules.patch, multipath not ready yet.

-------------------------------------------------------------------
Tue Jul 17 12:43:43 UTC 2012 - rmilasan@suse.com

- Fix the installation of multipath.rules file.

-------------------------------------------------------------------
Mon Jun 11 12:58:05 UTC 2012 - rmilasan@suse.com

- Drop RUN+="socket:..." and update the multipath.rule like Fedora
  does.

-------------------------------------------------------------------
Wed May 30 17:32:10 CEST 2012 - hare@suse.de

- Update to version 0.4.9
- Merge in latest changes from mainline

-------------------------------------------------------------------
Fri Apr 20 08:35:06 UTC 2012 - rmilasan@suse.com

- Run update of initrd at %post and %postun.
  We need this to make sure initrd reflects the updates.

-------------------------------------------------------------------
Fri Sep 30 15:40:21 UTC 2011 - uli@suse.com

- cross-build fix: use %__cc macro

-------------------------------------------------------------------
Fri May 27 09:34:36 UTC 2011 - lnussel@suse.de

- don't hard require boot.device-mapper in boot.multipath. dm-mod is
  autoloaded when accessing /dev/mapper/control anyways.

-------------------------------------------------------------------
Mon Apr  4 16:40:14 UTC 2011 - crrodriguez@opensuse.org

- fix build fail with AS_NEEDED by default

-------------------------------------------------------------------
Fri Nov 26 10:18:45 CET 2010 - meissner@suse.de

- updated one more dm_simplecmd caller with &cookie.
- bumped 1 character buffer to 1 byte more for leading \0

-------------------------------------------------------------------
Tue Jul  6 16:17:27 CEST 2010 - hare@suse.de

- Merge with fixes from mainline.

-------------------------------------------------------------------
Wed Jun 30 16:19:00 UTC 2010 - jengelh@medozas.de

- fix compilation on bi-arch by specifying LIB=%_lib
  (Makefiles would erroneously assume a 64-bit target just by the
  sheer presence of lib64, which is wrong)
- always add in -D_GNU_SOURCE to get at struct ucred

-------------------------------------------------------------------
Wed Jun 23 15:09:46 CEST 2010 - hare@suse.de

- Increase initial timeout for 'tur' checker (bnc#616694)

-------------------------------------------------------------------
Fri Jun 18 13:19:13 CEST 2010 - hare@suse.de

- Set geometry information for multipath maps (bnc#613363)
- Reset 'running' parameter for directio (bnc#600043)
- Add fallback to init script for older versions (bnc#602957)

-------------------------------------------------------------------
Fri Jun  4 12:18:02 CEST 2010 - hare@suse.de

- Add HP 2000 to internal hardware table (bnc#603359)
- Make path state messages unique
- Add 'reassign_maps' configuration parameter
- Profiling fixes:
  * Update 'max_fds' handling
  * Use strcmp() instead of strcmp_chomp()
  * Simplify sysfs_get_device()
  * Remove duplicate calls to path_offline()
  * Simplify dm_get_name()
  * Fixup devt2devname()
  * Rework dm_reassign()
- check argument length in execute_program(bnc#610914)
- Do not use LOG_CONS when opening syslog (bnc#610914)
- Remove pid file usage from init scripts (bnc#600412)
- Fixup boot.multipath init script (bnc#600412)

-------------------------------------------------------------------
Wed May 12 08:08:47 CEST 2010 - hare@suse.de

- Always provide symlinks for udev (bnc#603785)

-------------------------------------------------------------------
Thu May  6 14:02:11 CEST 2010 - hare@suse.de

- Use minor number in ev_remove_map() (bnc#599770)
- signal_waiter() overwrites structure (bnc#591399)
- Serialize startup on large machines (bnc#598697)
- Update multipath(8) manpage for '-p' (bnc#602970)
- Mark 'readsector0' checker as deprecated (bnc#589340)

-------------------------------------------------------------------
Mon Apr 26 13:33:30 CEST 2010 - hare@suse.de

- Errorneous message 'error starting uevent listener'
- Graceful shutdown of logging thread (bnc#591399)

-------------------------------------------------------------------
Mon Apr 26 12:02:32 CEST 2010 - hare@suse.de

- Missing '-p' option for mkdir in mkinitrd script (bnc#597786)
- rdac message not printed correctly (bnc#598302)
- Use alias when printing log messages (bnc#598302)
- valgrind fixes (bnc#591399)
- Use VECTOR_SIZE() defines
- Update hwtable factorization
- Use log_close() on shutdown
- Use refcounting for checkers (bnc#591399)
- More valgrind fixes

-------------------------------------------------------------------
Tue Apr 20 13:41:07 CEST 2010 - hare@suse.de

- Provide correct persistent symlinks for user_friendly_names
  (bnc#596301)
- Fixup hardware table for LSI arrays (bnc#597713)
- Reassign maps during startup (bnc#586834)
- Update manpage

-------------------------------------------------------------------
Tue Apr 20 12:51:53 CEST 2010 - mmarek@suse.cz

- Use mkdir -p in mkinitrd setup script (bnc#597786).

-------------------------------------------------------------------
Fri Apr  9 15:30:55 CEST 2010 - hare@suse.de

- Remove 'minor' argument from add_map_without_path
- Check for correct device-mapper device in uevent handler
- Start uevent service handler from main thread
- Do not reassign multipath maps (bnc#594341)
- Protect waiter structure by mutex (bnc#581200)
- Log directly to syslog on shutdown (bnc#581200)
- Clear up uevent queue on shutdown
- Add more IBM/FAStT arrays (bnc#578738)

-------------------------------------------------------------------
Mon Mar 29 16:35:15 CEST 2010 - hare@suse.de

- Display average priority as group priority (bnc#588591)
- Implement 'wait event' cli command (bnc#586834)
- Reset existing maps (bnc#577894)

-------------------------------------------------------------------
Mon Mar 15 13:54:56 CET 2010 - hare@suse.de

- Setup 'checkint' when loading config file (bnc#586847)

-------------------------------------------------------------------
Wed Mar 10 11:20:56 CET 2010 - hare@suse.de

- Fix typo in persistent rules for by-label/by-uuid
- Update debug string in verify_paths()
- Evaluate feature setting in verify_paths() (bnc#584197)

-------------------------------------------------------------------
Fri Mar  5 09:34:37 CET 2010 - hare@suse.de

- Fixup 'async_timeout' initialization again (bnc#580413)

-------------------------------------------------------------------
Fri Feb 26 12:37:10 UTC 2010 - coolo@novell.com

- fix buffer overflow in strncat

-------------------------------------------------------------------
Mon Feb 22 10:08:44 CET 2010 - hare@suse.de

- 'reset log' cli command crashes daemon (bnc#577889)
- Initialize 'async_timeout' variable correctly (bnc#580413)

-------------------------------------------------------------------
Thu Feb  4 11:28:36 CET 2010 - hare@suse.de

- Add hardware defaults for EMC Invista (bnc#573870)
- Use '--replace-whitespace' for scsi_id (bnc#572209)
- Asynchronous mode for tur checker (bnc#552688)
- Update queue_if_no_path after sync with kernel state
  (bnc#570932)
- Add 'max_polling_interval' config variable (bnc#570932)
- Add 'async_timeout' configuration variable (bnc#570932)
- Use default scsi_id callout for EMC Symmetrix (bnc#528481)
- Update path_offline() to return device status
- Update filename in init script
- Fixes from upstream:
  * do not allow 0 size for multipath devices
  * Add nexenta comstart hardware defaults
  * Add checks for conf->xxx
  * Add %z wildcard to display path serial
  * don't pretend config file has setup parameters
  * documentation fixes

-------------------------------------------------------------------
Mon Jan 25 14:44:43 CET 2010 - hare@suse.de

- Fixup kpartx initrd script to handle loop devices (bnc#523749)
- Switch off 'queue_if_no_path' before removing maps (bnc#475523)
- Update logical partition handling (bnc#551827)

-------------------------------------------------------------------
Fri Jan 22 16:19:17 CET 2010 - hare@suse.de

- Fix mkinitrd scripts for 64bit (bnc572143)
- Remove logical partitions maps with 'multipath -f'

-------------------------------------------------------------------
Fri Jan 22 14:30:36 CET 2010 - ro@suse.de

- testing for existence of /lib64 is not sufficient to find out
  if we are building for a lib64 platform

-------------------------------------------------------------------
Mon Jan 11 15:10:18 CET 2010 - hare@suse.de

- Update dev_loss_tmo for no_path_retry (bnc#492469)

-------------------------------------------------------------------
Tue Nov 17 16:36:19 CET 2009 - hare@suse.de

- Merge in changes from OpenSUSE 11.2
- Update 'no_path_retry' correctly for failed paths (bnc#534666)
- Update no_path_retry setting when evaluating features (bnc#542145)
- directio: block count calculation wrong (bnc#549028)
- multipath segfaults if configuration file contains errors
  (bnc#540118)

-------------------------------------------------------------------
Thu Oct 22 16:29:35 CEST 2009 - hare@suse.de

- Make 'param' local (bnc#548708)
- Include multipath-fix.patch in git tree.

-------------------------------------------------------------------
Mon Sep 28 15:34:02 CEST 2009 - hare@suse.de

- Fixup strip whitespaces from getuid output (bnc#542085)
- Change prefix for DASD devices to 'ccw'
- Update no_path_retry setting when evaluating features (bnc#542145)

-------------------------------------------------------------------
Wed Sep 16 12:54:03 CEST 2009 - hare@suse.de

- Update features when queue_if_no_path is set (bnc#511607)
- Ignore error messages when multipathd is not started
- Add debugging output for feature changes
- Add generic LSI/Engenio controller (bnc#508030)
- Update 'no_path_retry' correctly for failed paths (bnc#534666)
- TUR checker should not return 'failed' for reservation conflict
  (bnc#498413)

-------------------------------------------------------------------
Tue Sep  8 20:56:53 UTC 2009 - aj@suse.de

- Fix last patch, one caller of dm_simplecmd was not updated
  (multipath-fix.patch).

-------------------------------------------------------------------
Fri Aug 21 15:49:47 CEST 2009 - hare@suse.de

- Update to latest upstream git version
- Merge in SLES11 fixes
- Build package from git tree
- Implement '-u' option for kpartx (bnc#517442)

-------------------------------------------------------------------
Mon Jul 13 12:24:34 CEST 2009 - hare@suse.de

- Check for errors in pthread_create()
- Lock vectors during shutdown
- Cleanup various MALLOC/REALLOC callers
- Fix multipathd crash on shutdown
- Do not run kpartx on dm-uevent messages (bnc#473352)
- Set pthread stacksize correctly (bnc#485287)
- Add STK arrays to internal hardware table (bnc#503855)
- Correct persistent symlink for cciss (bnc#497997)
- Backport some fixes from upstream (bnc#445023)
- Add 'reset log' cli command
- no_path_retry <N> causes I/O to fail (bnc#485281)
- Terminate uevent service queue
- Wait for daemon to shutdown (bnc#481389)
- Update cli request processing
- Safe memory allocation in cli_handlers
- Use 'LOG_CONS' option for openlog()
- Remove sysfs attribute cache
- Add 'shutdown' cli command
- Display FC error messages correctly
- Wait for devices in init script (bnc#487586)
- Always synchronize with dm state (bnc#447887)
- Add 'aas' path prioritizer (bnc#472069)
- Synchronize daemon startup with init file (bnc#481389)
- Merge feature string in assemble_map (bnc#507793)

-------------------------------------------------------------------
Fri Jun 19 10:35:46 CEST 2009 - coolo@novell.com

- disable as-needed for this package as it fails to build with it

-------------------------------------------------------------------
Fri Mar 20 10:43:12 CET 2009 - hare@suse.de

- Reset checker message for blocked checkers
- Increase priority for EMC Clariion arrays (bnc#484529)
- Start waiter threads for single paths correctly (bnc#473841)
- Use pthread_sigmask in alias.c when called from daemon.

-------------------------------------------------------------------
Thu Mar 19 12:09:03 CET 2009 - hare@suse.de

- Add %pre and %post scripts to stop multipathd during update
- Don't set FC parameter on non-SCSI devices
- multipath -t crashes with invalid configuration file

-------------------------------------------------------------------
Fri Mar 13 14:21:05 CET 2009 - hare@suse.de

- Don't remove partition mappings on stop (bnc#468826)
- Set stacksize for log thread
- Terminate all I/O before flushing maps (bnc#475523)
- Select 'features' keyword from multipath setting (bnc#465009)

-------------------------------------------------------------------
Tue Mar 10 12:46:36 CET 2009 - hare@suse.de

- Use lists for uevent processing (bnc#478874)
- Set stacksize of uevent handling thread (bnc#478874)
- Increase uevent buffer size
- Strip trailing blanks from wwid
- Stack overflow in uev_trigger (bnc#476540)

-------------------------------------------------------------------
Thu Feb 26 12:36:40 CET 2009 - hare@suse.de

- Fixup multibus zero path handling (bnc#476330)
- Update checker handling for blocked devices
- Only pass block events to multipathd
- Clean up uevent processing (bnc#478874)
- Set stacksize correctly for event processing thread (bnc#478874)

-------------------------------------------------------------------
Mon Feb 23 16:36:32 CET 2009 - hare@suse.de

- Remove stray umask() call (bnc#458598)
- Don't call kpartx if no paths are active (bnc#473352)

-------------------------------------------------------------------
Thu Feb 19 16:26:32 CET 2009 - hare@suse.de

- Multipathd dies immediately after startup (bnc#473029)
- Return ghost state if port is in standby (bnc#475816)
- Switch off queue_if_no_path before removing paths (bnc#475523)

-------------------------------------------------------------------
Mon Feb  9 14:53:01 CET 2009 - hare@suse.de

- Fix leastpending loadbalancer output (bnc#444199)
- Start waitevent checker on new paths (bnc#473841)
- Use 'noflush' for kpartx (bnc#473352)

-------------------------------------------------------------------
Fri Feb  6 15:00:45 CET 2009 - hare@suse.de

- Display multipath output for leastpending loadbalancer
  properly (bnc#444199)

-------------------------------------------------------------------
Wed Feb  4 11:38:31 CET 2009 - hare@suse.de

- Set queue_if_no_path setting during map reload (bnc#472253)
- Remove obsolete 'umount map' uevent handling
- Retry TUR on driver errors (bnc#456961)

-------------------------------------------------------------------
Tue Feb  3 11:22:41 CET 2009 - hare@suse.de

- Copy persistent bindings file into initramfs (bnc#468804)
- Invert DM_STATE check for kpartx rules (bnc#440959)

-------------------------------------------------------------------
Mon Feb  2 11:27:51 CET 2009 - hare@suse.de

- Correct dbg_malloc() definition
- Fix more memory leaks
- Double free on path release (bnc#458393)

-------------------------------------------------------------------
Mon Jan 26 14:17:57 CET 2009 - hare@suse.de

- Don't access blocked devices in checkerloop()
- Check for validity in VECTOR_XXX defines (bnc#469269,bnc#457465)

-------------------------------------------------------------------
Fri Jan 23 14:15:18 CET 2009 - hare@suse.de

- Update dev_loss_tmo handling (bnc#458393)
- Fix directio error messages
- Update sdev_state handling

-------------------------------------------------------------------
Mon Jan 19 09:18:28 CET 2009 - hare@suse.de

- Add new HP machines to hardware table (bnc#442133)
- Print device-mapper tables for debugging
- Properly quote variables in mkinitrd scripts (bnc#447966)
- shuffle call to memarea_init
- Add xdr_setsite in init scripts (bnc#459529)

-------------------------------------------------------------------
Tue Jan 13 16:14:39 CET 2009 - hare@suse.de

- Do not run checkers or prioritizers on blocked devices
  (bnc#464155)
- Implement dev_loss_tmo and fast_io_fail_tmo (bnc#464155)
- Use default values for dev_loss_tmo and fast_io_fail_tmo
- Display checker and prio name on failure
- Add more debugging output

-------------------------------------------------------------------
Mon Jan 12 17:28:47 CET 2009 - hare@suse.de

- Set max_fds setting for multipath (bnc#457443)
- Enhance error messages for checker and prio loading (bnc#456214)
- Fix merge errors for prio_weightedpath (bnc#441007)
- Fix sysfs_attr_get_value (bnc#456747)
- Do not reinitialize prio and checker lists after config file
  has been parsed (bnc#464373)
- Minor cleanups

-------------------------------------------------------------------
Thu Dec  4 15:05:08 CET 2008 - hare@suse.de

- Split off IBM ESS hwtable entries (bnc#439763)
- Reload map when device R/O setting changes (bnc#440959)

-------------------------------------------------------------------
Fri Nov 21 14:07:56 CET 2008 - hare@suse.de

- Add 'Weighted Paths' prioritizer (bnc#441007)
- Fix crashes in update_multipath

-------------------------------------------------------------------
Thu Nov 20 16:10:48 CET 2008 - hare@suse.de

- Valgrind fixes
  * Add missing initialisation
  * Always allocate memory for alias
  * Check return value of basename
- Adapt to new sysfs layout (bnc#435215, bnc#445041)
- Use /sys/dev to speedup reverse lookups
- Rework sysfs device handling (bnc#435215, bnc#438031)
- Search for correct hardware entry during reconfigure (bnc#435688)
- Use local variables for device mapper params
- Allow zero paths for multipath maps

-------------------------------------------------------------------
Mon Nov 17 12:42:34 CET 2008 - hare@suse.de

- Update HP hardware table (bnc#442133)
- Zero out lines in print.c (bnc#445023)

-------------------------------------------------------------------
Mon Nov 10 08:51:26 CET 2008 - hare@suse.de

- Check for empty mpvecs in mpvec_garbage_collector() (bnc#437245)
- dmraid uuid starts with 'DMRAID' (bnc#439439)
- Handle arguments to multipathd from the init file

-------------------------------------------------------------------
Thu Nov  6 17:36:51 CET 2008 - ro@suse.de

- commenting multiline rpm macros is dangerous (read broken)
  remove percent sign in commented macro lines

-------------------------------------------------------------------
Mon Nov  3 15:37:08 CET 2008 - hare@suse.de

- Use pthread_join() during shutdown to avoid crash (bnc#437245)
- Fixup '%n' to handle '!' kernel device name syntax (bnc#435172)
- Use correct commandline for cciss scsi_id callouts (bnc#435172)
- Do not check for valid mp context in get_state() (bnc#433659)
- Link directio checker against libaio (bnc#433659)
- Use regmatch when checking for duplicates in hwtable (bnc#439763)

-------------------------------------------------------------------
Mon Oct 27 10:30:18 CET 2008 - hare@suse.de

- Patches from mainline:
  * Increase bindings file lock timeout
  * Fixes for 'show paths format'
  * Add 'show wildcards' cli cmd
  * Add support for IBM storage devices
- fopen() returns NULL on failure (bnc#432598)
- Read verbosity level from configuration file (bnc#388284)
- kpartx -l does not remove it's loop device (bnc#417266)
- Missing fixes for libprio ontap.c (bnc#426975)
- Increase buffer size in find_loop_by_file (bnc#436428)
- Include SCSI device handler modules for initrd (bnc#431877)

-------------------------------------------------------------------
Fri Sep 26 16:26:55 CEST 2008 - hare@suse.de

- Implement map resize (FATE#302007)
- Handle cciss devices correctly (bnc#419123)

-------------------------------------------------------------------
Wed Sep 24 22:59:11 CEST 2008 - ro@suse.de

- use udevadm info instead of udevinfo

-------------------------------------------------------------------
Wed Sep  3 11:09:34 CEST 2008 - hare@suse.de

- Merge in fixes from upstream:
  * Add IBM IPR to hardware table (bnc#419086)
  * Add IBM DS4300 to hardware table
  * Fix settings for scsi_id changes
- Call mkinitrd_setup during %post and %postun (bnc#413709)

-------------------------------------------------------------------
Thu Aug 28 17:08:16 CEST 2008 - ro@suse.de

- fix init scripts

-------------------------------------------------------------------
Wed Jul 23 14:45:18 CEST 2008 - hare@suse.de

- Update to version 0.4.8
- Include changes from SLES10
- Include mkinitrd scriptlets

-------------------------------------------------------------------
Wed May 28 09:50:28 CEST 2008 - hare@suse.de

- Calculate correct partition offset in kpartx (bnc#394658)

-------------------------------------------------------------------
Fri May  9 13:25:30 CEST 2008 - hare@suse.de

- Fixup kpartx rules (bnc#387667)

-------------------------------------------------------------------
Tue Apr 29 17:05:19 CEST 2008 - hare@suse.de

- Merge in fixes from upstream
- Merge fixes from SLES10 SP2

-------------------------------------------------------------------
Wed Sep 19 15:30:41 CEST 2007 - hare@suse.de

- Fixup generated dm_linear udev rules (#218122)

-------------------------------------------------------------------
Thu Aug 30 09:24:27 CEST 2007 - hare@suse.de

- Rework dm_linear; udev rules should only be
  created if the feature was activated (#302422)

-------------------------------------------------------------------
Fri Aug 10 16:48:31 CEST 2007 - hare@suse.de

- Implement dm_linear (#218122)

-------------------------------------------------------------------
Thu Aug  2 11:10:35 CEST 2007 - hare@suse.de

- Merge in latest fixes from upstream
- Remove local patches; merge with upstream
- Fix kpartx handling of extended partitions
- Use underscores for partition names (#293792)

-------------------------------------------------------------------
Mon May 21 15:34:07 CEST 2007 - hare@suse.de

- Rework udev handling
- Split off kpartx package

-------------------------------------------------------------------
Mon May 14 16:20:55 CEST 2007 - hare@suse.de

- Merge in latest fixes from upstream
- Add all SuSE specific files to git repository.

-------------------------------------------------------------------
Fri May 11 16:06:16 CEST 2007 - hare@suse.de

- Include latest changes from upstream
- Remove libsysfs (242766)
- Handle extended partitions for kpartx

-------------------------------------------------------------------
Mon Dec  4 16:51:13 CET 2006 - dmueller@suse.de

- don't build as root

-------------------------------------------------------------------
Fri Nov 17 11:55:00 CET 2006 - hare@suse.de

- integrate upstream fixes
- update udev rule for YaST2 dmraid support (217807])

-------------------------------------------------------------------
Mon Nov  6 13:11:17 CET 2006 - hare@suse.de

- Really fixup udev rule (216167).

-------------------------------------------------------------------
Fri Oct 20 02:07:47 CEST 2006 - ro@suse.de

- make it build

-------------------------------------------------------------------
Mon Sep 25 10:03:49 CEST 2006 - hare@suse.de

- update to latest fixes from git tree
- remove fixes integrated in upstream
- fixup udev rule (#203688)

-------------------------------------------------------------------
Thu Sep 14 00:18:10 CEST 2006 - ro@suse.de

- use device-mapper-devel in BuildRequires

-------------------------------------------------------------------
Thu Aug 31 10:56:01 CEST 2006 - hare@suse.de

- include latest fixes from git tree
- update kpartx_id and udev rules to work
  with dmraid.
- Fix return value for multipath -l

-------------------------------------------------------------------
Thu Aug 17 02:07:59 CEST 2006 - ro@suse.de

- workaround problem in git-patch
  normal patch can't do a "rename", so copy file first

-------------------------------------------------------------------
Tue Jul 11 15:04:59 CEST 2006 - hare@suse.de

- Update to official version 0.4.7
- Refactor git update to apply to 0.4.7

-------------------------------------------------------------------
Wed Jun 28 13:51:36 CEST 2006 - hare@suse.de

- Remove blacklisting of dasd device node,
  use product_blacklist instead (#188688)

-------------------------------------------------------------------
Mon Jun 12 15:14:41 CEST 2006 - hare@suse.de

- Add 72-multipath-compat.rules to create 'by-name'
  symlink again for compability (#183663)

-------------------------------------------------------------------
Fri Jun  2 12:47:05 CEST 2006 - hare@suse.de

- Merge in fixed from upstream
  - Set device-mapper name correctly (#181127)

-------------------------------------------------------------------
Thu Jun  1 17:29:23 CEST 2006 - hare@suse.de

- Merge in fixes from upstream
  - Fixup aliasing handling
  - Fix string length in pp_alua
- Use correct regexp patterns for hwtable (#177842)
- Fixup 71-multipath.rules to work correctly with the
  updated device-mapper online/offline events (#176516 - LTC23961)
- Add kpartx_id for the updated 71-multipath.rules

-------------------------------------------------------------------
Mon May 22 17:16:00 CEST 2006 - schwab@suse.de

- Don't strip binaries.

-------------------------------------------------------------------
Tue May  2 12:48:56 CEST 2006 - hare@suse.de

- Merge in fixes from upstream
  - Merged local patches
  - Added hds_modular prioritizer
- Remove merged patches
- Allow for setting of maximum number of open files (#149979)
- Implement 'stop' for init scripts

-------------------------------------------------------------------
Mon Apr 10 09:48:16 CEST 2006 - hare@suse.de

- Lowering priority for pp_tpc
- Split off DS6000 to fixup priority handler (#161347)

-------------------------------------------------------------------
Wed Apr  5 12:14:53 CEST 2006 - hare@suse.de

- Disable debug messages in pp_tpc.

-------------------------------------------------------------------
Wed Mar 29 09:27:50 CEST 2006 - hare@suse.de

- Explicitely create partitions at boot time (#159927)

-------------------------------------------------------------------
Thu Mar 23 11:36:25 CET 2006 - hare@suse.de

- Add hwtable entry for IBM 3526.

-------------------------------------------------------------------
Tue Mar 14 16:40:41 CET 2006 - hare@suse.de

- Fix another typo in mpath_id.

-------------------------------------------------------------------
Tue Mar 14 16:20:33 CET 2006 - hare@suse.de

- Fix typo in mpath_id.

-------------------------------------------------------------------
Mon Mar 13 13:29:08 CET 2006 - hare@suse.de

- Fix autobuild warnings.
- Include some minor fixed from upstream.

-------------------------------------------------------------------
Thu Mar  9 11:28:11 CET 2006 - hare@suse.de

- Add mpath_id program to call kpartx only on multipathed
  devices (#149995 - LTC21557).
- Include latest fixes from upstream.

-------------------------------------------------------------------
Wed Feb  8 16:13:15 CET 2006 - hare@suse.de

- Add device blacklisting (#85778)
- Further manpage installation fixes (#146179, #147053, #147911)

-------------------------------------------------------------------
Wed Jan 25 21:38:27 CET 2006 - mls@suse.de

- converted neededforbuild to BuildRequires

-------------------------------------------------------------------
Thu Jan 19 13:59:32 CET 2006 - hare@suse.de

- Fix manpage installation.

-------------------------------------------------------------------
Tue Jan 17 09:01:03 CET 2006 - hare@suse.de

- Include latest git fixes
- Remove old patches which are now upstream
- Add new hwtable entry for shark (#142176)

-------------------------------------------------------------------
Fri Dec 16 15:20:47 CET 2005 - hare@suse.de

- Fix dependencies for /etc/init.d/boot.multipath
- Fix kpartx rules to generate proper partition names.

-------------------------------------------------------------------
Wed Dec  7 16:49:02 CET 2005 - hare@suse.de

- Update to multipath-tools-0.4.6
- Include latest git fixes
- Port patches from SLES9 SP3

-------------------------------------------------------------------
Mon Oct 31 12:30:14 CET 2005 - dmueller@suse.de

- don't build as root

-------------------------------------------------------------------
Mon Sep  5 17:40:04 CEST 2005 - matz@suse.de

- Fix broken usage of self-defined syscall [#114933].

-------------------------------------------------------------------
Fri Aug 26 16:00:36 CEST 2005 - hare@suse.de

- Fix kpartx DASD partition support

-------------------------------------------------------------------
Thu Aug  4 16:45:27 CEST 2005 - hare@suse.de

- Add 'directio' path checker
- Add support for S/390 DASD (PAV enablement).
- Update to package from SLES9

-------------------------------------------------------------------
Thu Jun 23 10:05:56 CEST 2005 - lmb@suse.de

- LUs with a WWN containing "fd" were blacklisted (#93562).

-------------------------------------------------------------------
Thu Jun 16 16:33:42 CEST 2005 - lmb@suse.de

- Remove stray newline character from /dev/disk/by-name/ entries
  (#85798, #86763)
- Clear /dev/disk/by-name/ on boot. (#85978)
- scsi_id now handles EMC Symmetrix; remove work-around for #86760.

-------------------------------------------------------------------
Wed Jun 15 13:31:47 CEST 2005 - meissner@suse.de

- use RPM_OPT_FLAGS.

-------------------------------------------------------------------
Mon Jun 13 23:51:59 CEST 2005 - ro@suse.de

- neededforbuild: udev -> sysfsutils

-------------------------------------------------------------------
Tue Jun  7 15:38:36 CEST 2005 - lmb@suse.de

- Import fixes from upstream.
- Hardware table updates for IBM ESS and EMC CX (#81688).
- Reinstate paths correctly after failure/restore cycle (#85781,
  #86444).
- Create map names again and fix segfault in devmap_name (#85798).

-------------------------------------------------------------------
Tue May 24 15:16:16 CEST 2005 - hare@suse.de

- Fix segmentation fault with EMC Symmetrix (#85614).
- Update EMC Symmetrix entry in hwtable.

-------------------------------------------------------------------
Mon May 23 12:21:31 CEST 2005 - hare@suse.de

- Add hwtable entry for IBM DS6000. (#63903)
- Do a rescan for devices if multipath command line option is set.

-------------------------------------------------------------------
Fri May 20 15:29:45 CEST 2005 - hare@suse.de

- Fix devmap_name to use mapname and return proper status (#84748).

-------------------------------------------------------------------
Thu May 12 12:10:39 CEST 2005 - lmb@suse.de

- Don't complain about default prio callout command (#81695).
- Reflect recent changes in boot.multipath as well as multipathd init
  scripts.
- Actually fail paths when they are detected to be failed by multipathd
  (#81679).
- killproc/startproc/checkproc can't be used with multipathd because of
  the way the daemon switches to its own namespace (#80443).

-------------------------------------------------------------------
Mon May  9 11:18:35 CEST 2005 - hare@suse.de

- Use proper path checker for SGI TPC arrays.
- Update hwtable entries for SGI TP9400 and SGI TP9500.
- Write correct PID file (#80443).

-------------------------------------------------------------------
Mon Apr 25 11:41:33 CEST 2005 - lmb@suse.de

- Update to 0.4.4: pp_alua now licensed as GPL (#78628).
- multipath-tools-oom-adj.patch: oom_adj to a valid value.

-------------------------------------------------------------------
Thu Apr 21 10:50:05 CEST 2005 - lmb@suse.de

- Update to 0.4.4-pre18 which fixes the multipathd to initialize
  correctly in the absence of a configuration file (79239).

-------------------------------------------------------------------
Wed Apr 20 16:05:56 CEST 2005 - lmb@suse.de

- Put multipath cache back into /dev because /var might not be mounted.
- Correct hwtable entry SGI TP9400, TP9500 and IBM 3542.

-------------------------------------------------------------------
Wed Apr 20 13:32:51 CEST 2005 - lmb@suse.de

- Update to 0.4.4-pre16
- Build against device-mapper.1.01.xx correctly.

-------------------------------------------------------------------
Tue Apr 19 12:02:49 CEST 2005 - lmb@suse.de

- Build w/o device-mapper update again.

-------------------------------------------------------------------
Mon Apr 18 14:21:59 CEST 2005 - lmb@suse.de

- Update to 0.4.4-pre14
- Build versus device-mapper-1.01.01 to prevent deadlocks in
  kernel-space.
- Fix devmap_name to work with udev.
- Fix startup of multipathd w/o configuration file present.

-------------------------------------------------------------------
Fri Apr 15 14:46:19 CEST 2005 - lmb@suse.de

- Add path priority checker for EMC CLARiiON and make necessary
  adjustments so that it gets called by default (#62491).
- Set the default udev dir to '/dev'

-------------------------------------------------------------------
Fri Apr 15 13:18:42 CEST 2005 - hare@suse.de

- Fix to allocate default strings (#78056)
- Fix default entry for TPC9500.

-------------------------------------------------------------------
Wed Apr 13 08:30:21 CEST 2005 - hare@suse.de

- Added pp_alua path priority checker.
- Update to multipath-tools-0.4.4-pre12.

-------------------------------------------------------------------
Mon Apr 11 13:32:05 CEST 2005 - hare@suse.de

- Update to multipath-tools-0.4.4-pre10.

-------------------------------------------------------------------
Fri Apr  8 09:38:16 CEST 2005 - hare@suse.de

- Update multipath to handle only true multipath devices (#62491).
- Update kpartx to use the device mapper target name if available.
- Add boot.multipath script for early set up of multipath targets.

-------------------------------------------------------------------
Thu Mar 31 09:32:12 CEST 2005 - hare@suse.de

- Update devmap_name to select targets by table type (#62493).

-------------------------------------------------------------------
Tue Jan 25 11:16:26 CET 2005 - lmb@suse.de

- Update to 0.4.2 and fix some bugs + add support for the extended DM
  multipath kernel module. (#47491)

-------------------------------------------------------------------
Thu Nov 11 18:15:15 CET 2004 - hare@suse.de

- Fix bugs to make it work on S/390 (#47491).

-------------------------------------------------------------------
Fri Nov  5 13:58:00 CET 2004 - hare@suse.de

- Update to version 0.3.6 (#47491).
- Fix multipath init script
- Install configuration file example.
- Install multipathd in /sbin instead of /usr/bin.

-------------------------------------------------------------------
Tue Jul 20 09:22:11 CEST 2004 - fehr@suse.de

- updated README mp-tools-issues.pdf (see #40640)

-------------------------------------------------------------------
Wed Jun  9 12:18:01 CEST 2004 - fehr@suse.de

- added pdf with README to package (see #40640)

-------------------------------------------------------------------
Thu Jun  3 18:11:41 CEST 2004 - fehr@suse.de

- updated to version 0.2.1
- removed patches zero-currpath.patch and rm-newline-in-name.patch
  already contained in 0.2.1

-------------------------------------------------------------------
Thu Jun  3 09:38:49 CEST 2004 - fehr@suse.de

- added patch zero-currpath.patch (see bugzilla #40640)

-------------------------------------------------------------------
Wed May 26 20:14:05 CEST 2004 - uli@suse.de

- fixed to build on s390x

-------------------------------------------------------------------
Wed May 26 10:57:37 CEST 2004 - fehr@suse.de

- added patch rm-newline-in-name.patch (see bugzilla #40640)

-------------------------------------------------------------------
Tue May 25 10:43:15 CEST 2004 - fehr@suse.de

- created initial version of a SuSE package from version 0.2.0 of
  multipath tools

-------------------------------------------------------------------

Places

File multipath-tools.changes of Package multipath-tools (Revision a8a5daa29266ed79c9a937ed9a6babbc)

Places