File python-CherryPy.changes of Package python-CherryPy
-------------------------------------------------------------------
Sun Jan 14 17:18:14 UTC 2024 - Dirk Müller <dmueller@suse.com>
- update to 18.9.0:
* Various changes.
- drop use-read_file-not-readfp.patch (upstream)
-------------------------------------------------------------------
Wed Nov 22 03:23:15 UTC 2023 - Steve Kowalik <steven.kowalik@suse.com>
- Add patch use-read_file-not-readfp.patch:
* Use read_file(), not readfp() for configparser.
- Switch to autosetup and pyproject macros.
-------------------------------------------------------------------
Mon May 8 07:19:28 UTC 2023 - Johannes Kastl <kastl@b1-systems.de>
- add sle15_python_module_pythons
-------------------------------------------------------------------
Tue Dec 13 00:25:14 UTC 2022 - Matej Cepl <mcepl@suse.com>
- Fix Recommends: it is python-python-memcached, not just
python-memcached.
-------------------------------------------------------------------
Tue Aug 2 11:32:54 UTC 2022 - Otto Hollmann <otto.hollmann@suse.com>
- Update to 18.8.0
* Dangerous characters received in a host header encoded using RFC 2047 are
now elided by default. Currently, dangerous characters are defined as CR
and LF. The original value is still available as
cherrypy.request.headers['Host'].raw if needed.
- Changes from v18.7.0
* Drop support for Python 3.5.
* Fixed compatibility on Python 3.11.
- Fix URL in spec file: cherrypy.org -> cherrypy.dev
-------------------------------------------------------------------
Tue Oct 5 14:01:39 UTC 2021 - Stefan Schubert <schubi@suse.de>
- Added BuildRequires: alts
-------------------------------------------------------------------
Sun Aug 22 11:56:04 UTC 2021 - Stefan Schubert <schubi@suse.de>
- Use libalternatives instead of update-alternatives.
-------------------------------------------------------------------
Mon Aug 16 13:25:38 UTC 2021 - John Paul Adrian Glaubitz <adrian.glaubitz@suse.com>
- Update to 18.6.1
* Fixed XLF flag in gzip header emitted by gzip compression tool
per RFC 1952, Section 2.3.1
* Restricted depending on pywin32 only under CPython so that it
won't get pulled-in under PyPy
* Bumped minimum version of PyWin32 to 227.
Block pywin32 install on Python 3.10 and later.
- Update Requires from setup.py
-------------------------------------------------------------------
Mon Dec 14 20:43:05 UTC 2020 - Benjamin Greiner <code@bnavigator.de>
- BuildRequire the already recommended simplejson to fix test suite
failures with Python 3.6
* for TW python36 flavor -- gh#openSUSE/python-rpm-macros#66
* for Leap
-------------------------------------------------------------------
Mon May 4 06:56:30 UTC 2020 - Johannes Grassler <johannes.grassler@suse.com>
- update to 18.6.0
* Add support for UTF-8 encoded attachment
-------------------------------------------------------------------
Sat Mar 7 14:07:44 UTC 2020 - Tomáš Chvátal <tchvatal@suse.com>
- Do remove pytest.ini to not mess with extra options completely
- Skip test reliably crashing in cheroot codebase
-------------------------------------------------------------------
Mon Feb 24 12:40:51 UTC 2020 - Tomáš Chvátal <tchvatal@suse.com>
- Export travis variable to skip more tests that can randomly
fail
-------------------------------------------------------------------
Mon Jan 13 15:00:55 UTC 2020 - Marketa Calabkova <mcalabkova@suse.com>
- update to 18.5.0
* Fixed issue where bytes values in a HeaderMap would be converted to strings.
* Rely on jaraco.collections for its case-insensitive dictionary support.
* Fixed issue in cpstats where the data/ endpoint would fail with encoding errors on Python 3.
* Simplify the passthrough of parameters to CPWebCase.getPage to cheroot.
CherryPy now requires cheroot 8.2.1 or later.
-------------------------------------------------------------------
Wed Oct 30 13:15:39 UTC 2019 - Tomáš Chvátal <tchvatal@suse.com>
- Skip known failing test upstream
-------------------------------------------------------------------
Fri Oct 11 07:43:34 UTC 2019 - Tomáš Chvátal <tchvatal@suse.com>
- Do not remove cherrypy tests from distribution as other projects
use it for self testing too
-------------------------------------------------------------------
Mon Oct 7 13:26:26 UTC 2019 - Tomáš Chvátal <tchvatal@suse.com>
- Update to 18.3.0:
* Support handling multiple exceptions when processing hooks
* Includes patch 6bb23991325f596023b8c87c76098870a7185df8 which
makes tests pass even with the more recent versions of Python
which have fixed http.client.HTTPConnection.putrequest().
Fallout from jsc#PM-1350
Aka gh#cherrypy/cherrypy#1781 (bsc#1158120)
-------------------------------------------------------------------
Tue Sep 24 08:49:15 UTC 2019 - Tomáš Chvátal <tchvatal@suse.com>
- Update to 18.2.0:
* File-based sessions no longer attempt to remove the lock files
when releasing locks, instead deferring to the default behavior
of zc.lockfile. Fixes :issue:`1391` and :issue:`1779`.
* Add native support for 308 Permanent Redirect usable via raise
cherrypy.HTTPRedirect('/new_uri', 308).
- Drop merged patch pytest5.patch
-------------------------------------------------------------------
Fri Jul 19 12:13:03 UTC 2019 - Tomáš Chvátal <tchvatal@suse.com>
- Add patch to work with pytest5, from upstream:
* pytest5.patch
-------------------------------------------------------------------
Fri Jul 19 12:06:57 UTC 2019 - Tomáš Chvátal <tchvatal@suse.com>
- Update to 18.1.2:
* Fixed :issue:`1377` via :pr:`1785`: Restore a native WSGI-less HTTP server support.
* :pr:`1769`: Reduce log level for non-error events in win32.py
-------------------------------------------------------------------
Fri May 31 15:32:40 CEST 2019 - Matej Cepl <mcepl@suse.com>
- boo#1136862: ignore StaticTest.test_null_bytes test case, which
fails due to Python 3 fixes for CVE-2019-9740. (gh#cherrypy/cherrypy#1781)
-------------------------------------------------------------------
Thu May 16 18:12:19 UTC 2019 - Guang Yee <gyee@suse.com>
- Disable test_wait_publishes_periodically test as it is unstable and
highly time sensitive.
-------------------------------------------------------------------
Thu Mar 28 14:03:13 UTC 2019 - Tomáš Chvátal <tchvatal@suse.com>
- Update to 18.1.1:
* Revert bus behavior change from 18.1.0 as the former behavior
was intentional
-------------------------------------------------------------------
Tue Mar 5 12:19:29 UTC 2019 - Tomáš Chvátal <tchvatal@suse.com>
- Update to 18.1.0:
* too many changes to iterate, see CHANGES.rst
* Dropped support for python2
- Make sure tests are run
-------------------------------------------------------------------
Fri Feb 9 14:23:16 UTC 2018 - normand@linux.vnet.ibm.com
- disable pytest as transient failures
-------------------------------------------------------------------
Wed Nov 8 18:06:13 UTC 2017 - jmatejek@suse.com
- conditionally disable python2
-------------------------------------------------------------------
Fri Mar 31 15:30:01 UTC 2017 - jmatejek@suse.com
- update for singlespec
- update to version 10.2.1
* too many changes to list
- add many new requirements and recommends
-------------------------------------------------------------------
Sun Feb 22 17:22:27 UTC 2015 - benoit.monin@gmx.fr
- update to version 3.6.0:
* Fixed HTTP range headers for negative length larger than
content size
* Disabled universal wheel generation as wsgiserver has Python
duality
* Pull Request #42: Correct TypeError in ``check_auth`` when
encrypt is used
* Pull Request #59: Correct signature of HandlerWrapperTool
* Pull Request #60: Fix error in SessionAuth where login_screen
was incorrectly used
* Issue #1077: Support keyword-only arguments in dispatchers
(Python 3)
* Issue #1019: Allow logging host name in the access log
* Pull Request #50: Fixed race condition in session cleanup
- changes from version 3.5.0:
* Issue #1301: When the incoming queue is full, now reject
additional connections. This functionality was added to
CherryPy 3.0, but unintentionally lost in 3.1
- changes from version 3.4.0:
* Miscellaneous quality improvements
- remove CFLAGS export
- use update-alternatives for cherryd binary
-------------------------------------------------------------------
Tue May 20 12:25:05 UTC 2014 - toddrme2178@gmail.com
- Update to version 3.3.0
+ No changelog available
- Update to version 3.2.6
+ No changelog available
- Update to version 3.2.5
+ No changelog available
-------------------------------------------------------------------
Thu Sep 26 22:47:54 UTC 2013 - p.drouand@gmail.com
- Update to version 3.2.4
+ No changelog available
- Remove redundant %clean section
-------------------------------------------------------------------
Wed May 23 04:54:27 UTC 2012 - highwaystar.ru@gmail.com
- update to 3.2.2
- python3 package added
- minor spec improvement
-------------------------------------------------------------------
Tue May 31 07:21:03 UTC 2011 - saschpe@suse.de
- Renamed package to python-CherryPy to match upstream PyPi name
* Added Provides/Obsoletes for python-cherrypy
-------------------------------------------------------------------
Thu Mar 3 09:59:01 UTC 2011 - saschpe@suse.de
- Update to 3.2:
* WSGI-1.0.1 compliance, support for Python's builtin SSL module
* Much improved FastCGI support
* Python 3 support
- Spec file cleanup:
* Added proper license header
* Added changelog section
- Repacked tarball as tar.bz2
-------------------------------------------------------------------
Tue May 12 13:12:38 CEST 2009 - poeml@suse.de
- the INSTALLED_FILES file name had a little typo
- fix changelog to be in chronological order (an error that I
probably introduced during the conversion)
-------------------------------------------------------------------
Tue May 12 13:04:52 CEST 2009 - poeml@novell.com
- add dos2unix to BuildRequires
- convert the package changelog from the in-specfile text to a .changes file,
to be edited with "osc vc"
-------------------------------------------------------------------
Tue Mar 10 12:00:00 CET 2009 - James Oakley <jfunk@funktronics.ca>
- Update to 3.1.1
-------------------------------------------------------------------
Mon Jan 21 12:00:00 CET 2008 - James Oakley <jfunk@funktronics.ca>
- Update to 3.0.3
-------------------------------------------------------------------
Mon Aug 13 12:00:00 CEST 2007 - James Oakley <jfunk@funktronics.ca>
- Update to 3.0.2:
* Some bugfixes
-------------------------------------------------------------------
Tue Mar 20 12:00:00 CET 2007 - James Oakley <jfunk@funktronics.ca>
- Update to 3.0.1:
* More docstrings. help() is more helpful than ever
* The WSGI server has been moved into its own package to allow for
easier use outside of CherryPy
* Session locking can now be "implicit" (before_handler), "early"
(before_request_body), or "explicit" (none)
* Moved checker back to cherrypy.checker from engine, and also added
a new check_config_types method. There's also a new checker config
namespace, so you can turn off the checker with "checker.on = False",
or turn off specific methods with "checker.check_method_foo = None"
-------------------------------------------------------------------
Thu Jan 17 12:00:00 CET 2007 - Cristian Rodriguez <judas_iscariote@shorewall.net>
- Update to 3.0.0
-------------------------------------------------------------------
Thu Jun 22 12:00:00 CEST 2006 - James Oakley <jfunk@funktronics.ca>
- Update
-------------------------------------------------------------------
Mon Oct 24 12:00:00 CET 2005 - James Oakley <jfunk@funktronics.ca>
- Update to final release
-------------------------------------------------------------------
Thu Oct 13 12:00:00 CET 2005 - James Oakley <jfunk@funktronics.ca>
- Update
- Build for SL10
-------------------------------------------------------------------
Fri Aug 12 12:00:00 CEST 2005 - James Oakley <jfunk@funktronics.ca>
- Initial release
