File gdb-6.6-buildid-locate-core-as-arg.patch of Package gdb

Overview Repositories Revisions Requests Users Attributes Meta

File gdb-6.6-buildid-locate-core-as-arg.patch of Package gdb (Revision dc190847fd738ae69d5f6b06ba10261b)

Currently displaying revision dc190847fd738ae69d5f6b06ba10261b , Show latest

From FEDORA_PATCHES Mon Sep 17 00:00:00 2001
From: Fedora GDB patches <invalid@email.com>
Date: Fri, 27 Oct 2017 21:07:50 +0200
Subject: gdb-6.6-buildid-locate-core-as-arg.patch

;;=push+jan

http://sourceware.org/ml/gdb-patches/2010-01/msg00558.html

[ Fixed up since the mail.  ]

On Thu, 21 Jan 2010 18:17:15 +0100, Doug Evans wrote:
> Not an exhaustive list, but if we go down the path of converting "gdb
> corefile" to "gdb -c corefile", then we also need to think about "file
> corefile" being converted to "core corefile" [or "target core
> corefile", "core" is apparently deprecated in favor of "target core"]
> and "target exec corefile" -> "target core corefile".  Presumably
> "file corefile" (and "target exec corefile") would discard the
> currently selected executable.  But maybe not.  Will that be confusing
> for users?  I don't know.

While thinking about it overriding some GDB _commands_ was not my intention.

There is a general assumption if I have a shell COMMAND and some FILE I can do
$ COMMAND FILE
and COMMAND will appropriately load the FILE.

FSF GDB currently needs to specify also the executable file for core files
which already inhibits this intuitive expectation.  OTOH with the build-id
locating patch which could allow such intuitive start  notneeding the
executable file.  Still it currently did not work due to the required "-c":
$ COMMAND -c COREFILE

Entering "file", "core-file" or "attach" commands is already explicit enough
so that it IMO should do what the command name says without any
autodetections.  The second command line argument
(captured_main->pid_or_core_arg) is also autodetected (for PID or CORE) but
neither "attach" accepts a core file nor "core-file" accepts a PID.

The patch makes sense only with the build-id patchset so this is not submit
for FSF GDB inclusion yet.  I am fine with your patch (+/- Hui Zhu's pending
bfd_check_format_matches) as the patch below is its natural extension.

Sorry for the delay,
Jan

2010-01-25  Jan Kratochvil  <jan.kratochvil@redhat.com>

* exceptions.h (enum errors <IS_CORE_ERROR>): New.
	* exec.c: Include exceptions.h.
	(exec_file_attach <bfd_core>): Call throw_error (IS_CORE_ERROR, ...).
	* main.c (exec_or_core_file_attach): New.
	(captured_main <optind < argc>): Set also corearg.
	(captured_main <strcmp (execarg, symarg) == 0>): New variable func.
	Call exec_or_core_file_attach if COREARG matches EXECARG.  Call
	symbol_file_add_main only if CORE_BFD remained NULL.

Http://sourceware.org/ml/gdb-patches/2010-01/msg00517.html
2010-01-20  Doug Evans  <dje@google.com>

* exec.c (exec_file_attach): Print a more useful error message if the
	user did "gdb core".

diff --git a/gdb/exec.c b/gdb/exec.c
--- a/gdb/exec.c
+++ b/gdb/exec.c
@@ -18,6 +18,8 @@
    along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
 #include "defs.h"
+#include "arch-utils.h"
+#include "exceptions.h"
 #include "frame.h"
 #include "inferior.h"
 #include "target.h"
@@ -345,12 +347,27 @@ exec_file_attach (const char *filename, int from_tty)
 
       if (!bfd_check_format_matches (exec_bfd, bfd_object, &matching))
 	{
+	  int is_core;
+
+	  /* If the user accidentally did "gdb core", print a useful
+	     error message.  Check it only after bfd_object has been checked as
+	     a valid executable may get recognized for example also as
+	     "trad-core".  */
+	  is_core = bfd_check_format (exec_bfd, bfd_core);
+
 	  /* Make sure to close exec_bfd, or else "run" might try to use
 	     it.  */
 	  exec_close ();
-	  error (_("\"%s\": not in executable format: %s"),
-		 scratch_pathname,
-		 gdb_bfd_errmsg (bfd_get_error (), matching).c_str ());
+
+	  if (is_core != 0)
+	    throw_error (IS_CORE_ERROR,
+			 _("\"%s\" is a core file.\n"
+			   "Please specify an executable to debug."),
+			 scratch_pathname);
+	  else
+	    error (_("\"%ss\": not in executable format: %s"),
+		   scratch_pathname,
+		   gdb_bfd_errmsg (bfd_get_error (), matching).c_str ());
 	}
 
       if (build_section_table (exec_bfd, &sections, &sections_end))
diff --git a/gdb/gdbsupport/common-exceptions.h b/gdb/gdbsupport/common-exceptions.h
--- a/gdb/gdbsupport/common-exceptions.h
+++ b/gdb/gdbsupport/common-exceptions.h
@@ -106,6 +106,9 @@ enum errors {
      "_ERROR" is appended to the name.  */
   MAX_COMPLETIONS_REACHED_ERROR,
 
+  /* Attempt to load a core file as executable.  */
+  IS_CORE_ERROR,
+
   /* Add more errors here.  */
   NR_ERRORS
 };
diff --git a/gdb/main.c b/gdb/main.c
--- a/gdb/main.c
+++ b/gdb/main.c
@@ -467,6 +467,34 @@ struct cmdarg
   char *string;
 };
 
+/* Call exec_file_attach.  If it detected FILENAME is a core file call
+   core_file_command.  Print the original exec_file_attach error only if
+   core_file_command failed to find a matching executable.  */
+
+static void
+exec_or_core_file_attach (const char *filename, int from_tty)
+{
+  gdb_assert (exec_bfd == NULL);
+
+  try
+    {
+      exec_file_attach (filename, from_tty);
+    }
+  catch (gdb_exception_error &e)
+    {
+      if (e.error == IS_CORE_ERROR)
+	{
+	  core_file_command ((char *) filename, from_tty);
+
+	  /* Iff the core file found its executable suppress the error message
+	     from exec_file_attach.  */
+	  if (exec_bfd != NULL)
+	    return;
+	}
+      throw_exception (std::move (e));
+    }
+}
+
 static void
 captured_main_1 (struct captured_main_args *context)
 {
@@ -907,6 +935,8 @@ captured_main_1 (struct captured_main_args *context)
 	{
 	  symarg = argv[optind];
 	  execarg = argv[optind];
+	  if (optind + 1 == argc && corearg == NULL)
+	    corearg = argv[optind];
 	  optind++;
 	}
 
@@ -1063,12 +1093,25 @@ captured_main_1 (struct captured_main_args *context)
       && symarg != NULL
       && strcmp (execarg, symarg) == 0)
     {
+      catch_command_errors_const_ftype *func;
+
+      /* Call exec_or_core_file_attach only if the file was specified as
+	 a command line argument (and not an a command line option).  */
+      if (corearg != NULL && strcmp (corearg, execarg) == 0)
+	{
+	  func = exec_or_core_file_attach;
+	  corearg = NULL;
+	}
+      else
+	func = exec_file_attach;
+
       /* The exec file and the symbol-file are the same.  If we can't
          open it, better only print one error message.
-         catch_command_errors returns non-zero on success!  */
-      ret = catch_command_errors (exec_file_attach, execarg,
-				  !batch_flag);
-      if (ret != 0)
+         catch_command_errors returns non-zero on success!
+	 Do not load EXECARG as a symbol file if it has been already processed
+	 as a core file.  */
+      ret = catch_command_errors (func, execarg, !batch_flag);
+      if (ret != 0 && core_bfd == NULL)
 	ret = catch_command_errors (symbol_file_add_main_adapter,
 				    symarg, !batch_flag);
     }

Places

File gdb-6.6-buildid-locate-core-as-arg.patch of Package gdb (Revision dc190847fd738ae69d5f6b06ba10261b)

Places