File keepalive-init.patch of Package keepalived
Index: keepalived-1.4.0/keepalived/etc/init.d/keepalived.suse.init.in
===================================================================
--- keepalived-1.4.0.orig/keepalived/etc/init.d/keepalived.suse.init.in
+++ keepalived-1.4.0/keepalived/etc/init.d/keepalived.suse.init.in
@@ -1,23 +1,23 @@
#! /bin/sh
### BEGIN INIT INFO
-# Provides: keepalived
+# Provides: keepalived
# Required-Start: $remote_fs $syslog
-# Required-Stop : $remote_fs $syslog
-# Default-Start : 3 5
-# Default-Stop : 0 1 2 6
-# Description : Start keepalived to allow XY and provide YZ
-# continued on second line by '#<TAB>'
+# Required-Stop: $remote_fs $syslog
+# Default-Start: 3 5
+# Default-Stop: 0 1 2 6
+# Short-Description: Start keepalived to manage IPVS & LVS
+# Description: Start keepalived to manage IPVS & LVS
### END INIT INFO
-DAEMON="Keepalived daemon"
-DAEMON_BIN="@sbindir@/keepalived"
-DAEMON_CONF="@sysconfdir@/keepalived/keepalived.conf"
-DAEMON_PIDFILE="@localstatedir@/run/keepalived.pid"
-DAEMON_OPT="-d"
+DAEMON='Keepalived daemon'
+DAEMON_BIN='@sbindir@/keepalived'
+DAEMON_CONF='@sysconfdir@/keepalived/keepalived.conf'
+DAEMON_PIDFILE='@localstatedir@/run/keepalived.pid'
+DAEMON_OPT='-d'
#DAEMON_USER="root"
-SUPPORTS_HUP="yes"
+SUPPORTS_HUP='yes'
# PidFile @localstatedir@/run/keepalived.pid
# DatabaseOwner root
@@ -25,6 +25,18 @@ pid_par=${DAEMON_PIDFILE:+"-p $DAEMON_PI
usr_par=${DAEMON_USER:+"-u $DAEMON_USER"}
test -x $DAEMON_BIN || exit 5
+test -x $DAEMON_BIN || { echo "$DAEMON_BIN not installed or executable";
+ if [ "$1" = "stop" ]; then exit 0;
+ else exit 5; fi; }
+
+test -r $DAEMON_CONF || { echo "$DAEMON_CONF not existing or readable";
+ if [ "$1" = "stop" ]; then exit 0;
+ else exit 6; fi; }
+
+# read sysconfig variables that might overwrite the daemon options
+if [ -r "$DAEMON_SYSCONF" ]; then
+ . "$DAEMON_SYSCONF"
+fi
# Shell functions sourced from /etc/rc.status:
# rc_check check and set local and overall rc status
@@ -60,71 +72,70 @@ rc_reset
test -e $DAEMON_PIDFILE && ! test -s $DAEMON_PIDFILE && rm $DAEMON_PIDFILE
case "$1" in
- start)
- echo -n "Starting $DAEMON "
- if test ! -f ${DAEMON_CONF}; then
- echo -n >&2 "Configuration file, ${DAEMON_CONF} does not exist. "
- rc_status -s
- exit 6
- fi
- checkproc $pid_par ${DAEMON_BIN}
- case $? in
- 0) echo -n "- Warning: daemon already running. " ;;
- 1) echo -n "- Warning: ${DAEMON_PIDFILE} exists. " ;;
- esac
-# echo "startproc $usr_par $pid_par ${DAEMON_BIN} ${DAEMON_OPT}"
- startproc $usr_par $pid_par ${DAEMON_BIN} ${DAEMON_OPT}
- rc_status -v
- ;;
- stop)
- echo -n "Shutting down $DAEMON "
- checkproc $pid_par ${DAEMON_BIN} || \
- echo -n " Warning: daemon not running. "
- killproc $pid_par -t 10 ${DAEMON_BIN}
- rc_status -v
- ;;
- try-restart|condrestart)
- if test "$1" = "condrestart"; then
- echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}"
- fi
- $0 status
- if test $? = 0; then
- $0 restart
- else
- rc_reset
- fi
- rc_status
- ;;
- restart)
- $0 stop
- $0 start
- rc_status
- ;;
- force-reload|reload)
- if test "$SUPPORTS_HUP" = "yes"; then
- echo -n "Reload service $DAEMON "
- checkproc $pid_par ${DAEMON_BIN} && \
- touch ${DAEMON_PIDFILE} || \
- echo -n >&2 " Warning: daemon not running. "
- killproc $pid_par -HUP ${DAEMON_BIN}
- rc_status -v
- else
- $0 stop && sleep 3 && $0 start
- rc_status
- fi
- ;;
- status)
- echo -n "Checking for $DAEMON "
- checkproc $pid_par ${DAEMON_BIN}
- rc_status -v
- ;;
- probe)
- test ${DAEMON_CONF} -nt ${DAEMON_PIDFILE} && echo reload
- ;;
- *)
- echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}"
- exit 1
- ;;
+ start)
+ echo -n "Starting $DAEMON "
+ if test ! -f ${DAEMON_CONF}; then
+ echo -n >&2 "Configuration file, ${DAEMON_CONF} does not exist. "
+ rc_status -s
+ exit 6
+ fi
+ checkproc $pid_par ${DAEMON_BIN}
+ case $? in
+ 0) echo -n "- Warning: daemon already running. " ;;
+ 1) echo -n "- Warning: ${DAEMON_PIDFILE} exists. " ;;
+ esac
+# echo "startproc $usr_par $pid_par ${DAEMON_BIN} ${KEEPALIVED_OPTIONS}"
+ startproc $usr_par $pid_par ${DAEMON_BIN} ${KEEPALIVED_OPTIONS}
+ rc_status -v
+ ;;
+ stop)
+ echo -n "Shutting down $DAEMON "
+ checkproc $pid_par ${DAEMON_BIN} || \
+ echo -n " Warning: daemon not running. "
+ killproc $pid_par -t 10 ${DAEMON_BIN}
+ rc_status -v
+ ;;
+ try-restart|condrestart)
+ if test "$1" = "condrestart"; then
+ echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}"
+ fi
+ $0 status
+ if test $? = 0; then
+ $0 restart
+ else
+ rc_reset
+ fi
+ rc_status
+ ;;
+ restart)
+ $0 stop
+ $0 start
+ rc_status
+ ;;
+ force-reload|reload)
+ if test "$SUPPORTS_HUP" = "yes"; then
+ echo -n "Reload service $DAEMON "
+ checkproc $pid_par ${DAEMON_BIN} && \
+ touch ${DAEMON_PIDFILE} || \
+ echo -n >&2 " Warning: daemon not running. "
+ killproc $pid_par -HUP ${DAEMON_BIN}
+ rc_status -v
+ else
+ $0 stop && sleep 3 && $0 start
+ rc_status
+ fi
+ ;;
+ status)
+ echo -n "Checking for $DAEMON "
+ checkproc $pid_par ${DAEMON_BIN}
+ rc_status -v
+ ;;
+ probe)
+ test ${DAEMON_CONF} -nt ${DAEMON_PIDFILE} && echo reload
+ ;;
+ *)
+ echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}"
+ exit 1
+ ;;
esac
rc_exit
-
