File openblas.changes of Package openblas

Overview Repositories Revisions Requests Users Attributes Meta

File openblas.changes of Package openblas (Revision 3a157ff3cf88f4eb1e58e1fc0b6e1f80)

Currently displaying revision 3a157ff3cf88f4eb1e58e1fc0b6e1f80 , Show latest

-------------------------------------------------------------------
Thu Dec 17 07:12:02 UTC 2020 - Ismail Dönmez <idonmez@suse.com>

- Update to version 0.3.13
  common:
  * Added a generic bfloat16 SBGEMV kernel
  * Fixed a potentially severe memory leak after fork in OpenMP builds
    that was introduced in 0.3.12
  * Added detection of the Fujitsu Fortran compiler
  * Added detection of the (e)gfortran compiler on OpenBSD
  * Added support for overriding the default name of the library independently
    from symbol suffixing in the gmake builds (already supported in cmake)
  
  RISC V:
  * Added a RISC V port optimized for C910V

POWER:
  * Added optimized POWER10 kernels for SAXPY, CAXPY, SDOT, DDOT and DGEMV_N
  * Improved DGEMM performance on POWER10
  * Improved STRSM and DTRSM performance on POWER9 and POWER10
  * Fixed segmemtation faults in DYNAMIC_ARCH builds
  * Fixed compilation with the PGI compiler

x86:
  * Fixed compilation of kernels that require SSE2 intrinsics since 0.3.12

x86_64:
  * Added an optimized bfloat16 SBGEMV kernel for SkylakeX and Cooperlake
  * Improved the performance of SASUM and DASUM kernels through parallelization
  * Improved the performance of SROT and DROT kernels
  * Improved the performance of multithreaded xSYRK
  * Fixed OpenMP builds that use the LLVM Clang compiler together with GNU gfortran
    (where linking of both the LLVM libomp and GNU libgomp could lead to lockups or
     wrong results)
  * Fixed miscompilations by old gcc 4.6
  * Fixed misdetection of AVX2 capability in some Sandybridge cpus
  * Fixed lockups in builds combining DYNAMIC_ARCH with TARGET=GENERIC on OpenBSD

ARM64:
  * Fixed segmentation faults in DYNAMIC_ARCH builds

MIPS:
  * Improved kernels for Loongson 3R3 ("3A") and 3R4 ("3B") models, including MSA
  * Fixed bugs in the MSA kernels for CGEMM, CTRMM, CGEMV and ZGEMV
  * Added handling of zero increments in the MSA kernels for SSWAP and DSWAP
  * Added DYNAMIC_ARCH support for MIPS64 (currently Loongson3R3/3R4 only)

SPARC:
  * Fixed building 32 and 64 bit SPARC kernels with the SolarisStudio compilers

-------------------------------------------------------------------
Wed Dec 16 16:27:22 UTC 2020 - Dominique Leuenberger <dimstar@opensuse.org>

- Fix invalid symlinks (boo#1179764).

-------------------------------------------------------------------
Sat Oct 24 16:27:35 UTC 2020 - Ismail Dönmez <idonmez@suse.com>

- Update to version 0.3.12
  common:
  * Fixed missing BLAS/LAPACK functions (inadvertently dropped during
    the build system restructuring to support selective compilation)
  * Fixed argument conversion macro in LAPACKE_zgesvdq (LAPACK #458)
  
  power:
  * Added optimized SCOPY/CCOPY kernels for POWER10
  * Increased and unified the default size of the GEMM buffer
  * Fixed building for POWER10 in DYNAMIC_ARCH mode
  * POWER10 compatibility test now checks binutils version as well
  * Cleaned up compiler warnings

x86_64:
  * Corrected compiler version checks for AVX2 compatibility
  * Added compiler option -mavx2 for building with flang
  * Fixed direct SGEMM pathway for small matrix sizes (broken by
    the code refactoring in 0.3.11)
  * Fixed unhandled partial register clobbers in several kernels
    for AXPY,DOT,GEMV_N and GEMV_T flagged by gcc10 tree-vectorizer

armv8:
  * Improved Apple Vortex support to include cross-compiling

- Drop fix-build.patch, merged upstream.

-------------------------------------------------------------------
Wed Oct 21 09:18:18 UTC 2020 - Ismail Dönmez <idonmez@suse.com>

- Update _constraints to use 12GB RAM on x86_64

-------------------------------------------------------------------
Wed Oct 21 05:17:45 UTC 2020 - Ismail Dönmez <idonmez@suse.com>

- Update to version 0.3.11
  common:
  * Reduced the default BLAS3_MEM_ALLOC_THRESHOLD (used as an upper
    limit for placing temporary arrays on the stack) to be compatible
    with a stack size of 1mb (as imposed by the JAVA runtime library)
  * Added mixed-precision dot function SBDOT and utility functions
    shstobf16, shdtobf16, sbf16tos and dbf16tod to convert between
    single or double precision float arrays and bfloat16 arrays
  * Fixed prototypes of LAPACK_?ggsvp and LAPACK_?ggsvd functions
    in lapack.h
  * Fixed underflow and rounding errors in LAPACK SLANV2 and DLANV2
    (causing miscalculations in e.g. SHSEQR/DHSEQR, LAPACK issue #263)
  * Fixed workspace calculation in LAPACK ?GELQ (LAPACK issue #415)
  * Fixed several bugs in the LAPACK testsuite
  * Improved performance of TRMM and TRSM for certain problem sizes
  * Fixed infinite recursions and workspace miscalculations in ReLAPACK
  * CMAKE builds no longer require pkg-config for creating the .pc file
  * Makefile builds no longer misread NO_CBLAS=0 or NO_LAPACK=0 as
    enabling these options
  * Fixed detection of gfortran when invoked through an mpi wrapper
  * Improve thread reinitialization performance with OpenMP after a fork
  * Added support for building only the subset of the library required
    for a particular precision by specifying BUILD_SINGLE, BUILD_DOUBLE
  * Optional function name prefixes and suffixes are now correctly
    reflected in the generated cblas.h
  * Added CMAKE build support for the LAPACK and multithreading tests

power:
  * Added optimized support for POWER10
  * Added support for compiling for POWER8 in 32bit mode
  * Added support for compilation with LLVM/clang
  * Added support for compilation with NVIDIA/PGI compilers
  * Fixed building on big-endian POWER8
  * Fixed miscompilation of ZDOTC by gcc10
  * Fixed alignment errors in the POWER8 SAXPY kernel
  * Improved CPU detection on AIX
  * Supported building with older compilers on POWER9

x86_64:
  * Added support for Intel Cooperlake
  * Added autodetection of AMD Renoir/Matisse/Zen3 cpus
  * Added autodetection of Intel Comet Lake cpus
  * Reimplemented ?sum, ?dot and daxpy using universal intrinsics
  * Reset the fpu state before using the fpu on Windows as a workaround
    for a problem introduced in Windows 10 build 19041 (a.k.a. SDK 2004)
  * Fixed potentially undefined behaviour in the dot and gemv_t kernels
  * Fixed a potential segmentation fault in DYNAMIC_ARCH builds
  * Fixed building for ZEN with PGI/NVIDIA and AMD AOCC compilers

armv7:
  * Fixed cpu detection on BSD-like systems

armv8:
  * Added preliminary support for Apple Vortex cpus
  * Added support for the Cavium ThunderX3T110 cpu
  * Fixed cpu detection on BSD-like systems
  * Fixed compilation in -std=C18 mode

IBM Z:
  * Added support for compiling with the clang compiler
  * Improved GEMM performance on Z14

- Enable bloat16 support via BUILD_BFLOAT16=1
- Add fix-build.patch to fix build with -Werror=return-type

-------------------------------------------------------------------
Sat Oct  3 07:30:06 UTC 2020 - Egbert Eich <eich@suse.com>

- Set DYNAMIC_ARCH everywhere, use a base CPU model for non-dynamic
  bits to have a reproducible base line:
  x86_64: CORE2
  aarch64: ARMV8
  ppc: POWER8
  s390: ZARCH_GENERIC
- Remove workaround for build failure on aarch64 (boo#1128794).

-------------------------------------------------------------------
Thu Sep 24 10:45:45 UTC 2020 - Egbert Eich <eich@suse.com>

- For s390/s390x add TARGET=ZARCH_GENERIC (jsc#SLE-13773).

-------------------------------------------------------------------
Wed Aug 12 02:36:15 UTC 2020 - Bernhard Wiedemann <bwiedemann@suse.com>

- Avoid compile-time CPU-detection (boo#1100677)

-------------------------------------------------------------------
Thu Jul 23 16:25:56 UTC 2020 - Egbert Eich <eich@suse.com>

- Add build support for gcc10 to HPC build (bsc#1174439).

-------------------------------------------------------------------
Mon Jun 15 05:13:19 UTC 2020 - Ismail Dönmez <idonmez@suse.com>

- Update to version 0.3.10
  common:
  * Improved thread locking behaviour in blas_server and parallel getrf
  * Imported bugfix 394 from LAPACK (spurious reference to "XERBL"
    due to overlong lines)
  * Imported bugfix 403 from LAPACK (compile option "recursive" required
    for correctness with Intel and PGI)
  * Imported bugfix 408 from LAPACK (wrong scaling in ZHEEQUB)
  * Imported bugfix 411 from LAPACK (infinite loop in LARGV/LARTG/LARTGP)
  * Fixed mismatches between BUFFERSIZE and GEMM_UNROLL parameters that
    could lead to crashes at large matrix sizes
  * Restored internal soname in dynamic libraries on FreeBSD and Dragonfly
  * Added API (openblas_setaffinity) to set thread affinity
    programmatically on Linux
  * Added initial infrastructure for half-precision floating point
    (bfloat16) support with a generic implementation of SHGEMM
  * Added CMAKE build system support for building the cblas_Xgemm3m
    functions
  * Fixed CMAKE support for building in a path with embedded spaces
  * Fixed CMAKE (non)handling of NO_EXPRECISION and MAX_STACK_ALLOC
  * Fixed GCC version detection in the Makefiles
  * Allowed overriding the names of AR, AS and LD in Makefile builds

POWER:
  * fixed big-endian POWER8 ELFv2 builds on FreeBSD
  * Fixed GCC version checks and DYNAMIC_ARCH builds on POWER9
  * Fixed CMAKE build support for POWER9
  * fixed a potential race condition in the thread buffer allocation
  * Worked around LAPACK test failures on PPC G4

MIPS:
  * fixed a potential race condition in the thread buffer allocation
  * Added support for MIPS 24K/24KE family based on P5600 kernels

MIPS64:
  * fixed a potential race condition in the thread buffer allocation
  * Added TARGET=GENERIC

ARMV7:
  * fixed a race condition in the thread buffer allocation

ARMV8:
  * Fixed a race condition in the thread buffer allocation
  * Fixed zero initialisation in the assembly for SGEMM and DGEMM BETA
  * Improved performance of the ThunderX2 DAXPY kernel
  * Added an optimized SGEMM kernel for Cortex A53
  * Fixed Makefile support for INTERFACE64 (8-byte integer)

x86_64:
  * Fixed a syntax error in the CMAKE setup for SkylakeX
  * Improved performance of STRSM on Haswell, SkylakeX and Ryzen
  * Improved SGEMM performance on SGEMM for workloads with ldc a
    multiple of 1024
  * Improved DGEMM performance on Skylake X
  * Fixed unwanted AVX512-dependency of SGEMM in DYNAMIC_ARCH
    builds created on SkylakeX
  * Removed data alignment requirement in the SSE2 copy kernels
    that could cause spurious crashes
  * Added a workaround for an optimizer bug in AppleClang 11.0.3
  * Fixed LAPACK-TEST failures with Intel Fortran
  * Fixed compilation and LAPACK test results with recent Flang
    and AMD AOCC
  * Fixed DYNAMIC_ARCH builds with CMAKE on OS X
  * Fixed missing exports of cblas_i?amin, cblas_i?min, cblas_i?max,
  * cblas_?sum, cblas_?gemm3m in the shared library on OS X
  * Fixed reporting of cpu name in DYNAMIC_ARCH builds (would sometimes
    show the name of an older generation chip supported by the same kernels)

IBM Z:
  * Improved performance of SGEMM/STRMM and DGEMM/DTRMM on Z14

- Refresh openblas-noexecstack.patch and openblas-s390.patch

-------------------------------------------------------------------
Mon Mar  2 08:19:23 UTC 2020 - Martin Liška <mliska@suse.cz>

- Update to version 0.3.9
  common:
  * Fixed a miscompilation of the GETRF functions with CMAKE
    The size of the memory buffer used for splitting GEMM tasks across
    multiple threads can now be configured in the build system.
    Imported bugfix 390 from LAPACK (missing NaN propagation in xCOMBSSQ)
  POWER:
  * fixed several compilation problems related to endianness and
    ELF version support on POWER8 and POWER9.
  * fixed misuse of the absolute value IAMIN/IAMAX in place of IMIN/IMAX
  * fixed a race condition in the level3 blas code
  MIPS64:
  * fixed misuse of the absolute value IAMIN/IAMAX in place of IMIN/IMAX
  ARMV7:
  * fixed a race condition in the level3 blas code
  * fixed a compilation problem on Android
  ARMV8:
  * Added support for Ampere EMAG8180
  * Added support for Neoverse N1
    improved performance of the blas_lock function
    fixed a race condition in the level3 blas code
  * Fixed a performance regression on TSV110 servers
  x86_64:
  * Fixed a long-standing error with undeclared register clobbers in
    the DSCAL microkernel for Haswell,SkylakeX and Zen exposed by gcc9.2
  *  Fixed a long-standing bug in the SSE implementation of the IAMAX functions
  *  Fixed a cmake build failure with DYNAMIC_ARCH on x86_64
  *  Fixed an oversight in the cpu detection code for Intel Goldmont+,
     Cannon Lake and Ice Lake
  * Fixed compile failure on OSX when the compiler name contains a dash
    (e.g. gcc-9)
  * Fixed compilation with MinGW on SkylakeX
  * Improved speed of the AVX512 GEMM3M code, added an AVX512 kernel for
  * STRMM and improved performance of the AVX2 GEMM kernels
  IBM Z:
  * fixed compilation of the DYNAMIC_ARCH code

-------------------------------------------------------------------
Wed Feb 26 12:22:00 UTC 2020 - Egbert Eich <eich@suse.com>

- Add support for gcc8/9 building (jsc#SLE-8604).

-------------------------------------------------------------------
Mon Feb 10 07:01:49 UTC 2020 - Ismail Dönmez <idonmez@suse.com>

- Update to version 0.3.8
  common:
  * LAPACK has been updated to 3.9.0 (plus patches up to January 2nd, 2020)
  * CMAKE support has been improved in several areas including cross-compilation
  * A thread race condition in the GEMM3M kernels was resolved
  * The "generic" (plain C) gemm beta kernel used by many targets has been sped up
  * An optimized version of the LAPACK trtrs functions has been added
  * An incompatibilty between the LAPACK tests and the OpenBLAS implementation of XERBLA
    was resolved, removing the numerous warnings about wrong error exits in the former
  * Support for NetBSD has been added
  * Support for compilation with g95 and non-GNU versions of ld has been improved
  * Compilation with (upcoming) gcc 10 is now supported
  power:
  * Worked around miscompilation of several POWER8 and POWER9 kernels by
    older versions of gcc
  * Added support for big-endian POWER8 and for compilation on AIX
  * Corrected bugs in the big-endian support for PPC440 and PPC970
  * DYNAMIC_ARCH support is now available in CMAKE builds as well
  armv8:
  * Performance of DGEMM_BETA and SGEMM_NCOPY has been improved
  * Compilation for 32bit works again 
  * Performance of the RPCC function has been improved
  * Improved performance on small systems
  * DYNAMIC_ARCH support is now available in CMAKE builds as well
  * Cross-compilation from OSX to IOS was simplified
  x86-64:
  * A new AVX512 DGEMM kernel was added and the AVX512 SGEMM kernel was
    significantly improved
  * Optimized AVX512 kernels for CGEMM and ZGEMM have been added
  * AVX2 kernels for STRMM, SGEMM, and CGEMM have been significantly
    sped up and optimized CGEMM3M and ZGEMM3M kernels have been added 
  * Added support for QEMU virtual cpus
  * A compilation problem with PGI and SUN compilers was fixed
  * Intel "Goldmont plus" is now autodetected
  * A potential crash on program exit on MS Windows has been fixed 
  IBM Z:
  * Z15 is now supported as Z14
  * DYNAMIC_ARCH is now available on ZARCH as well
- Remove now merged gcc10-Support-two-digit-version-numbers-in-gcc-version-che.patch

-------------------------------------------------------------------
Sun Dec  8 09:03:24 UTC 2019 - Martin Liška <mliska@suse.cz>

- Add gcc10-Support-two-digit-version-numbers-in-gcc-version-che.patch
  in order to fix boo#1158727.

-------------------------------------------------------------------
Mon Aug 12 06:22:47 UTC 2019 - Martin Liška <mliska@suse.cz>

- Update to version 0.3.7 (jsc#SLE-8492)
  common:
    * having the gmake special variables TARGET_ARCH or TARGET_MACH
      defined no longer causes build failures in ctest or utest
    * defining NO_AFFINITY or USE_TLS to zero in gmake builds
      no longer has the same effect as setting them to one
    * a new test program was added to allow checking the library for thread safety
    * a new option USE_LOCKING was added to ensure thread safety
      when OpenBLAS itself is built without multithreading but
    * will be called from multiple threads.
    * a build failure on Linux with glibc versions earlier than 2.5 was fixed
    * a runtime error with CPU enumeration (and NO_AFFINITY not set)
      on glibc 2.6 was fixed
    * NO_AFFINITY was added to the CMAKE options
      (and defaults to being active on Linux, as in the gmake builds)
  x86_64
    * the build-time logic for detection of AVX512 availability
      in the processor and compiler was fixed
    * gmake builds on OSX now set the internal name
      of the library to libopenblas.0.dylib (consistent with CMAKE)
    * the Haswell DGEMM kernel received a significant speedup
      through improved prefetch and load instructions
    * performance of DGEMM, DTRMM, DTRSM and ZDOT on Zen/Zen2
      was markedly increased by avoiding vpermpd instructions
    * the SKYLAKEX (AVX512) DGEMM helper functions have now been
      disabled to fix remaining errors in DGEMM, DSYMM and DTRMM
  POWER:
    * added support for building on FreeBSD/powerpc64 and FreeBSD/ppc970
    * added optimized kernels for POWER9 single and double precision complex BLAS3
    * added optimized kernels for POWER9 SGEMM and STRMM
  ARMV7:
    * fixed the softfp implementations of xAMAX and IxAMAX
    * removed the predefined -march= flags on both ARMV5
      and ARMV6 as they were appropriate for only a subset of platforms
- Remove not needed fix-arm64-cpuid-return.patch.

-------------------------------------------------------------------
Tue Apr 30 07:42:06 UTC 2019 - Martin Liška <mliska@suse.cz>

- Update to version 0.3.6 (boo#1122186)
  common:
    * the build tools now check that a given cpu TARGET is actually valid
    * the build-time check of system features (c_check) has been made
      less dependent on particular perl features (this should mainly
      benefit building on Windows)
    * several problems with ReLAPACK and its integration were fixed,
      including INTERFACE64 support and building a shared library
    * building with CMAKE on BSD systems was improved
    * a non-absolute SUM function was added based on the
      existing optimized code for ASUM
    * CBLAS interfaces to the IxMIN and IxMAX functions were added
    * a name clash between LAPACKE and BOOST headers was resolved
    * CMAKE builds with OpenMP failed to include the appropriate getrf_parallel
      kernels
    * a crash on thread (key) deletion with the USE_TLS=1 memory management
      option was fixed
    * restored several earlier fixes, in particular for OpenMP performance,
      building on BSD, and calling fork on CYGWIN, which had inadvertently
      been dropped in the 0.3.3 rewrite of the memory management code.
  POWER:
    * single precision BLAS1/2 functions have received optimized POWER8 kernels
    * POWER9 is now a separate target, with an optimized DGEMM/DTRMM kernel
    * building on PPC970 systems under OSX Leopard or Tiger is now supported
    * out-of-bounds memory accesses in the gemm_beta microkernels were fixed
    * building a shared library on AIX is now supported for POWER6
    * DYNAMIC_ARCH support has been added for POWER6 and newer
  ARMV7:
    * corrected xDOT behaviour with zero INC_X or INC_Y 
    * a bug in the IMIN implementation made it return the result of IMAX
  ARMV8:
    * added support for HiSilicon TSV110 cpus
    * the CMAKE build system now recognizes 32bit userspace on 64bit hardware 
    * cross-compilation with CMAKE now works again
    * a bug in the IMIN implementation made it return the result of IMAX
    * ARMV8 builds with the BINARY=32 option are now automatically handled as ARMV7
  x86_64:
    * the AVX512 DGEMM kernel has been disabled again due to unsolved problems
    * building with old versions of MSVC was fixed
    * it is now possible to build a static library on Windows with CMAKE
    * accessing environment variables on CYGWIN at run time was fixed
    * the CMAKE build system now recognizes 32bit userspace on 64bit hardware
    * Intel "Denverton" atom and Hygon "Dhyana" zen CPUs are now autodetected
    * building for DYNAMIC_ARCH with a DYNAMIC_LIST of targets is now supported
      with CMAKE as well
    * building for DYNAMIC_ARCH with GENERIC as the default target is now supported
    * a buffer overflow in the SSE GEMM kernel for Intel Nano targets was fixed
    * assembly bugs involving undeclared modification of input operands were fixed
      in the AXPY, DOT, GEMV, GER, SCAL, SYMV and TRSM microkernels for Nehalem, 
      Sandybridge, Haswell, Bulldozer and Piledriver. These would typically cause
      test failures or segfaults when compiled with recent versions of gcc from 8 onward.
    * a similar bug was fixed in the blas_quickdivide code used to split workloads
      in most functions
    * a bug in the IxMIN implementation for the GENERIC target made it return the result of IxMAX
    * fixed building on SkylakeX systems when either the compiler or the (emulated) operating 
      environment does not support AVX512
    * improved GEMM performance on ZEN targets
  x86:
    * build failures caused by the recently added checks for AVX512 were fixed
    * an inline assembly bug involving undeclared modification of an input argument was
      fixed in the blas_quickdivide code used to split workloads in most functions
    * a bug in the IMIN implementation for the GENERIC target made it return the result of IMAX
  MIPS32:
    * a bug in the IMIN implementation made it return the result of IMAX
  IBM Z:
    * optimized microkernels for single precicion BLAS1/2 functions have been added for Z13 and Z14
  - Rebase openblas-noexecstack.patch and openblas-s390.patch patches.
  - Remove 0001-Add-a-register-to-the-clobber-list-for-the-mul-instr.patch.

-------------------------------------------------------------------
Sun Mar 10 06:06:05 UTC 2019 - Stefan Brüns <stefan.bruens@rwth-aachen.de>

- Reduce _constraints to a reasonable size, the old constraints
  were probably necessary pre multibuild.
- Enable DYNAMIC_ARCH for aarch64, available since 0.3.4

-------------------------------------------------------------------
Thu Feb 14 18:22:49 UTC 2019 - Egbert Eich <eich@suse.com>

- Add OPENBLAS_INC and OPENBLAS_DIR to HPC environment (bsc#1125547).

-------------------------------------------------------------------
Tue Feb 12 19:33:00 UTC 2019 - Stefan Brüns <stefan.bruens@rwth-aachen.de>

- Fix https://github.com/xianyi/OpenBLAS/issues/2014
  Add 0001-Add-a-register-to-the-clobber-list-for-the-mul-instr.patch

-------------------------------------------------------------------
Mon Jan  7 10:15:03 UTC 2019 - Ismail Dönmez <idonmez@suse.com>

- Update to versiom 0.3.5
  common:
    * Loop unrolling in TRMV has been enabled again.
    * A domain error in the thread workload distribution for SYRK
      has been fixed.
    * gmake builds will now automatically add -fPIC to the build
      options if the platform requires it.
    * A pthreads key leakage (and associate crash on dlclose) in
      the USE_TLS codepath was fixed.
    * Building of the utest cases on systems that do not provide
      an implementation of complex.h was fixed.
  x86_64:
    * The SkylakeX code was changed to compile on OSX.
    * Unwanted application of the -march=skylake-avx512 option
      to the common code parts of a DYNAMIC_ARCH build was fixed.
    * Improved performance of SGEMM for small workloads on Skylake X.
    * Performance of SGEMM and DGEMM was improved on Haswell.
  armv8:
    * A configuration error that broke the CNRM2 kernel was corrected.
    * Compilation of the GEMM kernels with CMAKE was fixed.
    * DYNAMIC_ARCH builds are now available with CMAKE as well.
    * Using CMAKE for cross-compilation to the new cpu TARGETs
      introduced in 0.3.4 now works.
  power:
    * A problem in cpu autodetection for AIX has been corrected.

-------------------------------------------------------------------
Fri Dec  7 12:29:27 UTC 2018 - Ismail Dönmez <idonmez@suse.com>

- Update to version 0.3.4
  common:
    * The new, experimental thread-local memory allocation had
      inadvertently been left enabled for gmake builds in 0.3.3
      despite the announcement. It is now disabled by default,
      and single-threaded builds will keep using the old
      allocator even if the USE_TLS option is turned on.
    * OpenBLAS will now provide enough buffer space for at least
      50 threads by default.
    * The output of openblas_get_config() now contains the version
      number.
    * A serious thread safety bug in GEMV operation with small M and
      large N size has been fixed.
    * The code will now automatically call blas_thread_init after
      a fork if needed before handling a call to
      openblas_set_num_threads
    * Accesses to parallelized level3 functions from multiple
      callers are now serialized to avoid thread races
      (unless using OpenMP).
    * This should provide better performance than the
      known-threadsafe (but non-default)
      USE_SIMPLE_THREADED_LEVEL3 option.
    * When building LAPACK with gfortran, -frecursive is now
      (again) enabled by default to ensure correct behaviour.
    * The OpenBLAS version cblas.h now supports both CBLAS_ORDER
      and CBLAS_LAYOUT as the name of the matrix row/column order
      option.
    * Externally set LDFLAGS are now passed through to the final
      compile/link
    * steps to facilitate setting platform-specific linker flags.
    * A potential race condition during the build of LAPACK
      (that would usually manifest itself as a failure to build
      TESTING/MATGEN) has been fixed.
    * xHEMV has been changed to stay single-threaded for small
      input sizes where the overhead of multithreading exceeds
      any possible gains
    * CSWAP and ZSWAP have been limited to a single thread
      except on ARMV8 or ThunderX hardware with sizable input.
    * Linker flags for the PGI compiler have been updated
    * Behaviour of AXPY with zero increments is now handled
      in the C interface, correcting the result on at least
      Intel Atom.
    * The result matrix from calling SGELSS with an all-zero
      input matrix is now zeroed completely.
  x86_64:
    * Autodetection of AMD Ryzen2 has been fixed (again).
    * CMAKE builds now support labeling of an INTERFACE64=1
      build of the library with the _64 suffix.
    * AVX512 version of DGEMM has been added and the
      AVX512 SGEMM kernel has been sped up by rewriting
      with C intrinsics
    * Fixed compilation on RHEL5/CENTOS5 
      (issue with typename __WAIT_STATUS)
  armv8:
    * DYNAMic_ARCH support is now available for 64bit ARM
    * cross-compiling for ARMV8 under iOS now works.
    * cpu-specific code has been rearranged to make better
      use of both hardware commonalities and model-specific
      compiler optimizations.
    * XGENE1 has been removed as a TARGET, superseded by the
      improved generic ARMV8 support.
  armv7:
    * Older assembly mnemonics have been converted to UAL
      form to allow building with clang 7.0

-------------------------------------------------------------------
Tue Oct  9 19:00:49 UTC 2018 - Dmitry Roshchin <dmitry_r@opensuse.org>

- Update to version 0.3.3 
  common:
    * thread memory allocation has been switched back to the method
      used before version 0.3.1 due to unexpected problems caused by
      the new code under some circumstances.
    * LAPACK PR272 has been integrated, which fixes spurious errors
      in DSYEVR and related functions caused by missing conversion
      from ILAENV to ILAENV_2STAGE in several _2stage routines.
  x86_64
    * added AVX512 implementations of SDOT, DDOT, SAXPY, DAXPY,
      DSCAL, DGEMVN and DSYMVL
    * added a workaround for a cygwin issue that prevented compilation
      of AVX512 code

-------------------------------------------------------------------
Fri Aug 17 12:56:04 UTC 2018 - idonmez@suse.com

- Update to version 0.3.2
  common:
    * Fixes for regressions caused by the rewrite of the thread
      initialization code in 0.3.1
  x86_64:
    * Added autodetection of AMD Ryzen 2
    * Fixed build with older versions of MSVC
  power:
    * Fixed cpu autodetection for the BSDs
  mips64:
    * Fixed utest errors in AXPY, DSDOT, ROT and SWAP
- Version 0.3.1
  common:
    * Rewritten thread initialization code with significantly
      reduced overhead
    * Added CBLAS interfaces to the IxAMIN BLAS extension functions
    * Fixed the lapack-test target
    * CMAKE builds now create an OpenBLASConfig.cmake file
    * ZAXPY now uses a single thread for small input sizes
    * The LAPACK code was updated from Reference-LAPACK/lapack#253
  power:
    * Corrected CROT and ZROT behaviour with zero INC_X
  armv7:
    * Corrected xDOT behaviour with zero INC_X or INC_Y
  x86_64:
    * Retired some older targets of DYNAMIC_ARCH builds to a
      new option DYNAMIC_OLDER, this affects PENRYN,DUNNINGTON,
      OPTERON,OPTERON_SSE3,BOBCAT,ATOM and NANO (which will still
      be supported via the slower PRESCOTT kernels when this option
      is not set)
    * Added an option DYNAMIC_LIST that (used in conjunction with
      DYNAMIC_ARCH) allows to specify the list of x86_64 targets to
      include. Any target not on the list will be supported by
      the Sandybridge or Nehalem kernels if available, or by Prescott.
    * Improved SWITCH_RATIO on Haswell for increased GEMM throughput
    * Added initial support for Intel Skylake X, including an AVX512
      SGEMM kernel
    * Added autodetection of Intel Cannon Lake series as Skylake X
    * Added a default L2 cache size for hypervisors that return zero
      here (Chromebook)
    * Fixed a name clash with recent Windows10 headers that broke the
      build with (at least) recent mingw from MSYS2
    * Fixed a link error in mixed clang/gfortran builds with OpenMP
    * Updated the OSX deployment target to 10.8
    * Switched on parallel make for builds on MS Windows by default
  x86:
    * Fixed SSWAP and DSWAP behaviour with zero INC_X and INC_Y
- Version 0.3.0
  common:
     * Fixed some more thread race and locking bugs
     * Added preliminary support for calling an OpenMP build of the
       library from multiple threads
     * Removed performance impact of thread locks added in 0.2.20
       on OpenMP code
     * General code cleanup 
     * Optimized DSDOT implementation
     * Improved thread distribution for GEMM
     * Corrected IMATCOPY/OMATCOPY implementation
     * Fixed out-of-bounds accesses in the multithreaded xBMV/xPMV
       and SYMV implementations
     * Cmake build improvements
     * pkgconfig file now contains build options
     * openblas_get_config() now reports USE_OPENMP and NUM_THREADS
       settings used for the build
     * Corrections and improvements for systems with more than 64 cpus
     * LAPACK code updated to 3.8.0 including later fixes
     * Added ReLAPACK, a recursive implementation of several LAPACK functions
     * Rewrote ROTMG to handle cases that the netlib code failed to address
     * Disabled (broken) multithreading code for xTRMV
     * corrected prototypes of complex CBLAS functions to make our
       cblas.h match the generally accepted standard
     * Shared memory access failures on startup are now handled more gracefully
     * Restored utests from earlier releases (and made them pass on all
       affected systems)
  sparc:
    * several fixes for cpu autodetection
  arm:
    * Added support for CortexA53 and A72 
    * Added autodetection for ThunderX2T99
    * Made most optimized kernels the default for generic ARMv8 targets
  x86_64:
    * Parallelized DDOT kernel for Haswell
    * Changed alignment directives in assembly kernels to boost performance on OSX
    * Fixed register handling in the GEMV microkernels (bug exposed by gcc7)
    * Added support for building on OpenBSD and Dragonfly 
    * Updated compiler options to work with Intel release 2018
    * Support fully optimized build with clang/flang on Microsoft Windows
    * Fixed building on AIX
  ibm z:
    * added optimized BLAS 1/2 functions
  mips:
    * Fixed cpu autodetection helper code
    * Added mips32 1004K cpu (Mediatek MT7621 and similar SoC)
    * Added mips64 I6500 cpu
- Remove c_xerbla_no-void-return.patch: fixed upstream.

-------------------------------------------------------------------
Tue Jan 30 18:19:33 CET 2018 - ro@suse.de

- add openblas-s390.patch to build on s390 (bsc#1079513).

-------------------------------------------------------------------
Fri Jan  5 18:27:17 UTC 2018 - eich@suse.com

- Switch from gcc6 to gcc7 as additional compiler flavor for HPC on SLES.
- Fix library package requires - use HPC macro (boo#1074890).
- Fix unexpanded rpm macro in environment module file for HPC (boo#1074897).

-------------------------------------------------------------------
Mon Nov 27 11:55:04 UTC 2017 - normand@linux.vnet.ibm.com

- Add -mvsx option for ppc64 archi (not required for ppc64le)
  to avoid ./kernel/power/sasum_microk_power8.c:41:3: error: 
  '__vector' undeclared (first use in this function); ...

-------------------------------------------------------------------
Tue Oct 17 13:38:47 UTC 2017 - eich@suse.com

- Add magic to limit the number of flavors built in the
  OBS to non-HPC ones.

-------------------------------------------------------------------
Thu Oct 12 10:01:10 UTC 2017 - eich@suse.com

- Generate baselib.conf dynamically and only for the non-HPC
  builds: this avoids issues with the source validator.

-------------------------------------------------------------------
Fri Sep  8 14:30:29 UTC 2017 - eich@suse.com

- Convert openblas to multibuild.
- Add HPC build using environment modules.
  (FATE#321708).
- fix-arm64-cpuid-return.patch
  Fix CPUID detection on ARM (From OHPC).

-------------------------------------------------------------------
Wed Aug  9 19:45:54 UTC 2017 - dmitry_r@opensuse.org

- Remove migration %post scripts for old library names

-------------------------------------------------------------------
Sat Jul 29 16:08:38 UTC 2017 - badshah400@gmail.com

- Update to version 0.2.20:
  * common:
    - Improved CMake support
    - Fixed several thread race and locking bugs
    - Fixed default LAPACK optimization level
    - Updated LAPACK to 3.7.0
    - Added ReLAPACK (https://github.com/HPAC/ReLAPACK), make
      BUILD_RELAPACK=1
  * POWER:
    - Optimizations for Power9
    - Fixed several Power8 assembly bugs
  * ARM:
    - New optimized Vulcan and ThunderX2T99 targets
    - Support for ARMV7 SOFT_FP ABI  (make ARM_SOFTFP_ABI=1)
    - Detect all cpu cores including offline ones
    - Fix compilation with CLANG
    - Support building a shared library for Android
  * MIPS:
    - Fixed several threading issues
    - Fix compilation with CLANG
  * x86_64:
    - Detect Intel Bay Trail and Apollo Lake
    - Detect Intel Sky Lake and Kaby Lake
    - Detect Intel Knights Landing
    - Detect AMD A8, A10, A12 and Ryzen
    - Support 64bit builds with Visual Studio
    - Fix building with Intel and PGI compilers
    - Fix building with MINGW and TDM-GCC
    - Fix cmake builds for Haswell and related cpus
    - Fix building for Sandybridge with CLANG 3.9
    - Add support for the FLANG compiler
  * IBM Z:
    - New target z13 with BLAS3 optimizations
- Drop 0001-Fix-power8-asm.patch; fixed upstream.
- Minor rebase of c_xerbla_no-void-return.patch and
  openblas-noexecstack.patch for updated version.
- Remove installed pkgconfig file as it is not adapted to the
  library names we use.

-------------------------------------------------------------------
Thu May 18 09:33:23 UTC 2017 - meissner@suse.com

- 0001-Fix-power8-asm.patch: fixed power8 assembly (bsc#1039397)

-------------------------------------------------------------------
Wed Sep  7 15:58:36 UTC 2016 - idonmez@suse.com

- Update to version 0.2.19
  POWER:
    * Optimize BLAS on Power8
    * Fixed Julia+OpenBLAS bugs on Power8
  MIPS:
    * Optimize BLAS on MIPS P5600 and I6400
  ARM:
    * Improved on ARM Cortex-A57

-------------------------------------------------------------------
Wed Apr 13 08:12:19 UTC 2016 - dmitry_r@opensuse.org

- Update to version 0.2.18
  ARM:
    * Provide DGEMM 8x4 kernel for Cortex-A57
  POWER:
    * Optimize S and C BLAS3 on Power8
    * Optimize BLAS2/1 on Power8

-------------------------------------------------------------------
Mon Mar 21 21:15:39 UTC 2016 - dmitry_r@opensuse.org

- Update to version 0.2.17
  * Enable BUILD_LAPACK_DEPRECATED=1 by default.

-------------------------------------------------------------------
Wed Mar 16 19:35:53 UTC 2016 - idonmez@suse.com

- Update to version 0.2.16
  * Upgrade LAPACK to 3.6.0 version.
  * Disable multi-threading for small size swap and ger.
  * Improve small zger, zgemv, ztrmv using stack alloction.
  * Let openblas_get_num_threads return the number of active threads.
  * Fix LAPACK Dormbr, Dormlq bug.
  * Avoid potential getenv segfault.
  * Import LAPACK svn bugfix #142-#147,#150-#155
  x86/x86_64:
    * Optimize trsm kernels for AMD Bulldozer, Piledriver, Steamroller.
    * Detect Intel Avoton.
    * Detect AMD Trinity, Richland, E2-3200.
    * Optimize c/zgemv for AMD Bulldozer, Piledriver, Steamroller
    * Fix bug with scipy linalg test.
  ARM:
    * Support and optimize Cortex-A57 AArch64.
    * Update ARMV6 kernels.
    * Improve DGEMM for ARM Cortex-A57.
  POWER:
    * Fix detection of POWER architecture.
    * Optimize D and Z BLAS3 functions for Power8.
- Remove openblas-libs.patch, not needed.

-------------------------------------------------------------------
Tue Oct 27 21:11:50 UTC 2015 - dmitry_r@opensuse.org

- Update to version 0.2.15
  * Enable MAX_STACK_ALLOC flags by default.
  * Improve ger and gemv for small matrices.
  * Improve gemv parallel with small m and large n case.
  * Improve ?imatcopy when lda==ldb
  * Add vecLib benchmarks
  * Fix LAPACK lantr for row major matrices
  * Fix LAPACKE lansy
  * Import bug fixes for LAPACKE s/dormlq, c/zunmlq
  * Raise the signal when pthread_create fails
  * Drop obsolete openblas-arm64-build.patch
  x86/x86-64:
    * Support pure C generic kernels for x86/x86-64.
    * Support Intel Boardwell and Skylake by Haswell kernels.
    * Support AMD Excavator by Steamroller kernels.
    * Optimize s/d/c/zdot for Intel SandyBridge and Haswell.
    * Optimize s/d/c/zdot for AMD Piledriver and Steamroller.
    * Optimize s/d/c/zapxy for Intel SandyBridge and Haswell.
    * Optimize s/d/c/zapxy for AMD Piledriver and Steamroller.
    * Optimize d/c/zscal for Intel Haswell, dscal for Intel SandyBridge.
    * Optimize d/c/zscal for AMD Bulldozer, Piledriver and Steamroller.
    * Optimize s/dger for Intel SandyBridge.
    * Optimize s/dsymv for Intel SandyBridge.
    * Optimize ssymv for Intel Haswell.
    * Optimize dgemv for Intel Nehalem and Haswell.
    * Optimize dtrmm for Intel Haswell.
  ARM:
    * Support Android NDK armeabi-v7a-hard ABI (-mfloat-abi=hard)
    * Fix lock, rpcc bugs
  POWER:
    * Support ppc64le platform (ELF ABI v2)
    * Support POWER7/8 by POWER6 kernels.

-------------------------------------------------------------------
Wed Jul 29 21:13:47 UTC 2015 - dmitry_r@opensuse.org

- Change library name suffix
  * drop openblas-soname.patch
- Add RPM %post script for manual BLAS/LAPACK update-alternatives
  configuration update
- Use update-alternatives mechanism for OpenBLAS variants (serial,
  openmp, pthreads). pthreads variant is default for x86 and x86_64,
  OpenMP for other architectures.
- Fix build on ARM64
  * openblas-arm64-build.patch
- Add update-alternatives mechanism for CBLAS
- Provide cmake module
- Delete info about host cpu from openblas_config.h for dynamic arch
- Add update-alternatives to 'preup' and 'post' requires list for 
  libraries
- Add README.SUSE

-------------------------------------------------------------------
Wed Mar 25 08:05:20 UTC 2015 - dmitry_r@opensuse.org

- Update to version 0.2.14
  * Improve ger and gemv for small matrices by stack allocation.
    e.g. make -DMAX_STACK_ALLOC=2048
  * Introduce openblas_get_num_threads and openblas_get_num_procs.
  * Add ATLAS-style ?geadd function.
  * Fix c/zsyr bug with negative incx.
  * Fix race condition during shutdown causing a crash in
    gotoblas_set_affinity().
  x86/x86-64:
  * Support AMD Streamroller.
  ARM:
  * Add Cortex-A9 and Cortex-A15 targets.

-------------------------------------------------------------------
Wed Dec  3 16:06:49 UTC 2014 - dmitry_r@opensuse.org

- Update to version 0.2.13
  * Add SYMBOLPREFIX and SYMBOLSUFFIX makefile options
    for adding a prefix or suffix to all exported symbol names
    in the shared library.
  * Remove openblas-0.1.0-soname.patch
  * Add openblas-soname.patch
  * Rebase openblas-noexecstack.patch
  x86/x86-64:
  * Add generic kernel files for x86-64. make TARGET=GENERIC
  * Fix a bug of sgemm kernel on Intel Sandy Bridge.
  * Fix c_check bug on some amd64 systems.
  ARM:
  * Support APM's X-Gene 1 AArch64 processors.
  * Optimize trmm and sgemm.

-------------------------------------------------------------------
Fri Oct 17 13:09:58 UTC 2014 - dmitry_r@opensuse.org

- Update to version 0.2.12
  * Added CBLAS interface for ?omatcopy and ?imatcopy.
  * Enable ?gemm3m functions.
  * Added benchmark for ?gemm3m.
  * Optimized multithreading lower limits.
  * Disabled SYMM3M and HEMM3M functions because of segment violations.
  x86/x86-64:
  * Improved axpy and symv performance on AMD Bulldozer.
  * Improved gemv performance on modern Intel and AMD CPUs.

-------------------------------------------------------------------
Mon Aug 18 12:43:10 UTC 2014 - dmitry_r@opensuse.org

- Update to version 0.2.11
  * Added some benchmark codes.
  x86/x86-64:
  * Improved s/c/zgemm performance for Intel Haswell.
  * Improved s/d/c/zgemv performance.
  * Support the big numa machine.(EXPERIMENT)
  ARM:
  * Fix detection when cpuinfo uses "Processor".

-------------------------------------------------------------------
Thu Jul 17 20:44:58 UTC 2014 - dmitry_r@opensuse.org

- Update to version 0.2.10
  * Added BLAS extensions as following.
    s/d/c/zaxpby, s/d/c/zimatcopy, s/d/c/zomatcopy.
  * Added OPENBLAS_CORETYPE environment for dynamic_arch. (a86d34)
  * Support outputing the CPU corename on runtime.(#407)
  * Patched LAPACK to fix bug 114, 117, 118. 
   (http://www.netlib.org/lapack/bug_list.html)
  * Disabled ?gemm3m for a work-around fix. (#400)
  * Fixed lots of bugs for optimized kernels on sandybridge,Haswell, 
    bulldozer, and piledriver.
  * Remove obsolete openblas-0.2.9-gcc-warnings.patch

-------------------------------------------------------------------
Tue Jun 10 14:34:02 UTC 2014 - dmitry_r@opensuse.org

- Update to version 0.2.9
  * Update LAPACK to 3.5.0 version
  * Fixed compatiable issues with Clang and Pathscale compilers.
  * Added OPENBLAS_VERBOSE environment variable.(#338)
  * Make OpenBLAS thread-pool resilient to fork via pthread_atfork.
    (#294)
  * Rewrote rotmg
  * Fixed sdsdot bug.
  * Improved the result for LAPACK testing. (#372)
  x86/x86-64:
  * Optimization on Intel Haswell.
  * Enable optimization kernels on AMD Bulldozer and Piledriver.
  * Detect Intel Haswell for new Macbook.
  * To improve LAPACK testing, we fallback some kernels. (#372)
    https://github.com/xianyi/OpenBLAS/wiki/Fixed-optimized-kernels-To-do-List
  ARM:
  * Support ARMv6 and ARMv7 ISA.
  * Optimization on ARM Cortex-A9.
- Update patches:
  * openblas-0.2.8-libs.patch
  * openblas-0.2.8-noexecstack.patch
  to
  * openblas-libs.patch
  * openblas-noexecstack.patch
- Fix gcc warnings (#385)
  * openblas-0.2.9-gcc-warnings.patch

-------------------------------------------------------------------
Sat Apr 12 09:02:16 UTC 2014 - dmitry_r@opensuse.org

- Remove files with problematic licenses

-------------------------------------------------------------------
Fri Apr  4 20:32:24 UTC 2014 - dmitry_r@opensuse.org

- Update to version 0.2.8
  * Add executable stack markings.
  * Respect user's LDFLAGS
  * Rollback bulldozer and piledriver kernels to barcelona kernels  
  * update openblas-0.2.6-libs.patch
  * update c_xerbla_no-void-return.patch
  * update openblas-0.2.7-noexecstack.patch

-------------------------------------------------------------------
Fri Jul 26 20:31:17 UTC 2013 - scorot@free.fr

- version 0.2.7
  * Support LSB (Linux Standard Base) 4.1.
    e.g. make CC=lsbcc
  * Include LAPACK 3.4.2 source codes to the repo. 
    Avoid downloading at compile time.
  * Add NO_PARALLEL_MAKE flag to disable parallel make.
  * Create openblas_get_parallel to retrieve information which 
    parallelization model is used by OpenBLAS. (Thank
    grisuthedragon)
  * Detect LLVM/Clang compiler.
  * A walk round for dtrti_U single thread bug. Replace it with
    LAPACK codes. (#191)
  * Optimize c/zgemm, trsm, dgemv_n, ddot, daxpy, dcopy on 
    AMD Bulldozer. (Thank Werner Saar)
  * Add Intel Haswell support (using Sandybridge optimizations).
    (Thank Dan Luu)
  * Add AMD Piledriver support (using Bulldozer optimizations).
  * Fix the computational error in zgemm avx kernel on 
    Sandybridge. (#237)
  * Fix the overflow bug in gemv.
  * Fix the overflow bug in multi-threaded BLAS3, getrf when
    NUM_THREADS is very large.(#214, #221, #246).
- rebase patch noexecstack.patch
- remove lapack source tarball since lapack sources are included
  in openblas sources
- increase NUM_THREAD from 32 to 64

-------------------------------------------------------------------
Sat Mar  2 16:08:16 UTC 2013 - scorot@free.fr

- version 0.2.6
  * Improved OpenMP performance slightly. (d744c9)
  * Improved cblas.h compatibility with Intel MKL.(#185)
  * Fixed the overflowing bug in single thread cholesky
    factorization.
  * Fixed the overflowing buffer bug of multithreading hbmv and
    sbmv.(#174)
  * Added AMD Bulldozer x86-64 S/DGEMM AVX kernels. (Thank
    Werner Saar) We will tune the performance in future.
  * Auto-detect Intel Xeon E7540.
  * Fixed the overflowing buffer bug of gemv. (#173)
  * Fixed the bug of s/cdot about invalid reading NAN on
    x86_64. (#189)
- rebase patch0 openblas-0.2.6-libs.patch

-------------------------------------------------------------------
Sun Feb 17 14:10:55 UTC 2013 - jengelh@inai.de

- Remove redundant cleaning commands
- Do not create .so.0.2.5. SO versions are not package release
  numbers.

-------------------------------------------------------------------
Mon Jan 21 20:19:13 UTC 2013 - scorot@free.fr

- use Requires(post) and Requires(preun) instead of PreReq
- add patch markups in spec file

-------------------------------------------------------------------
Tue Jan 15 20:42:00 UTC 2013 - scorot@free.fr

- add update-alternatives support to allow easy switching between
  the different blas and lapack implementations

-------------------------------------------------------------------
Fri Nov 30 20:46:47 UTC 2012 - scorot@free.fr

- version 0.2.5
 * Export LAPACK 3.4.2 symbols in shared library. (#147)
 * Restore the original CPU affinity when calling 
   openblas_set_num_threads(1) (#153)
 * Fixed a SEGFAULT bug in dgemv_t when m is very large.(#154)

-------------------------------------------------------------------
Mon Oct  8 19:12:49 UTC 2012 - scorot@free.fr

- version 0.2.4
 * Upgraded LAPACK to 3.4.2 version. (#145)
 * f77blas.h:compatibility for compilers without C99 complex 
   number support. (#141)
 * Added NO_AVX flag. Check OS supporting AVX on runtime. (#139)

-------------------------------------------------------------------
Mon Aug 20 21:30:03 UTC 2012 - scorot@free.fr

- version 0.2.3
 * Fixed LAPACK unstable bug about ?laswp. (#130)
 * Fixed the shared library bug about unloading the library on 
   Linux (#132).

-------------------------------------------------------------------
Sun Jul  8 20:24:03 UTC 2012 - scorot@free.fr

- version 0.2.2
 * Support Intel Sandy Bridge 22nm desktop/mobile CPU

-------------------------------------------------------------------
Mon Jul  2 20:45:57 UTC 2012 - scorot@free.fr

- version 0.2.1
 * Fixed the SEGFAULT bug about hyper-theading
 * Support AMD Bulldozer by using GotoBLAS2 AMD Barcelona codes
 * Removed the limitation (64) of numbers of CPU cores.
   Now, it supports 256 cores at max.
 * Supported clang compiler.
 * Fixed some build bugs on FreeBSD
 * Optimized Level-3 BLAS on Intel Sandy Bridge x86-64 by AVX
   instructions.
 * Support AMD Bobcat by using GotoBLAS2 AMD Barcelona codes. 
- update patch3

-------------------------------------------------------------------
Wed May  2 21:16:16 UTC 2012 - scorot@free.fr

- update patch0

-------------------------------------------------------------------
Wed May  2 20:45:18 UTC 2012 - scorot@free.fr

- again fix remaining library file name error in spec file

-------------------------------------------------------------------
Wed May  2 20:18:48 UTC 2012 - scorot@free.fr

- fix wrong library file name version

-------------------------------------------------------------------
Wed May  2 20:05:55 UTC 2012 - scorot@free.fr

- Update to version 0.1.1 
	* Upgraded LAPACK to 3.4.1 version. (Thank Zaheer Chothia)
	* Supported LAPACKE, a C interface to LAPACKE. (Thank Zaheer Chothia)
	* Fixed the build bug (MD5 and download) on Mac OSX.
	* Auto download CUnit 2.1.2-2 from SF.net with UTEST_CHECK=1.
x86/x86_64:
	* Auto-detect Intel Sandy Bridge Core i7-3xxx & Xeon E7 Westmere-EX.
	* Test alpha=Nan in dscale.
	* Fixed a SEGFAULT bug in samax on x86 windows.

-------------------------------------------------------------------
Wed Apr 25 21:46:07 UTC 2012 - scorot@free.fr

- version 0.1.0
- update openblas-0.1.0-soname.patch
- add openblas-0.1.0-noexecstack.patch
- spec file cleanup

-------------------------------------------------------------------
Mon Mar 12 22:19:17 UTC 2012 - scorot@free.fr

- version 0.1alpha2.5

Places

File openblas.changes of Package openblas (Revision 3a157ff3cf88f4eb1e58e1fc0b6e1f80)

Places