File rp-pppoe-3.10-init.patch of Package rp-pppoe

Overview Repositories Revisions Requests Users Attributes Meta

File rp-pppoe-3.10-init.patch of Package rp-pppoe

diff -ruN rp-pppoe-3.10-orig/scripts/pppoe-init-suse.in rp-pppoe-3.10/scripts/pppoe-init-suse.in
--- rp-pppoe-3.10-orig/scripts/pppoe-init-suse.in	2008-06-30 14:00:42.000000000 +0000
+++ rp-pppoe-3.10/scripts/pppoe-init-suse.in	2009-05-08 00:07:50.511480596 +0000
@@ -12,53 +12,114 @@
 # 2 or any later version.
 # Modifed to work with SuSE 6.4 linux by Gary Cameron.
 #
-# Source function library.
-#. /etc/rc.d/init.d/functions  # For red hat?
-. /etc/rc.config               # For SuSE, enables setting from /etc/rc.config
+# Modifed and fixed to work with SuSE linux by Anas Nashif <nashif@suse.de>
+
+### BEGIN INIT INFO
+# Provides:          rp-pppoe
+# Required-Start:    $remote_fs $syslog $network $named
+# Required-Stop:     $syslog $remote_fs
+# Default-Start:     3 5
+# Default-Stop:      0 1 2 6
+# Short-Description: Start Roaring Penguin ADSL
+# Description:       Start Roaring Penguin ADSL
+### END INIT INFO
+
+. /etc/rc.status
 
 #Tweak this
 restart_time=120
 
 # From AUTOCONF
 prefix=@prefix@
-exec_prefix=@exec_prefix@
+exec_prefix=${prefix}
 
 # Paths to programs
 START=@sbindir@/pppoe-start
 STOP=@sbindir@/pppoe-stop
 STATUS=@sbindir@/pppoe-status
 
-test "$PPPoE_START" = "yes" || exit 0
+CONFIG=`cat @sbindir@/pppoe-start | grep "^CONFIG" | awk -F"=" '{print $2}'`
+CF_BASE=$(basename $CONFIG)
+PIDFILE=`cat $CONFIG | grep "^PIDFILE" | awk -F"=" '{print $2}'`
+PPPOE_PIDFILE=`cat @sbindir@/pppoe-connect | grep "^PPPOE_PIDFILE" | awk -F"=" '{print $2}'`
+PPPD_PIDFILE=`cat @sbindir@/pppoe-connect | grep "^PPPD_PIDFILE" | awk -F"=" '{print $2}'`
+
+# IN: RET
+chk_status(){
+  RES=
+  case $1 in
+    0)	RES=0
+  ;;
+    1)	if [ -e $PPPOE_PIDFILE ] || [ -e $PPPD_PIDFILE ]; then
+		RES=1
+	else
+		RES=3
+	fi 
+  ;;
+  esac
+  return $RES
+}
+
 
 # The echo return value for success (defined in /etc/rc.config).
-return=$rc_done
 case "$1" in
     start)
-        echo -n "Bringing up PPPoE link"
-        $START  > /dev/null 2>&1 || return=$rc_failed
-        echo -e "$return"
-        ;;
+	echo -n "Bringing up PPPoE link: "
+	$START  > /dev/null 2>&1
 
+	# Remember status and be verbose
+	rc_status -v
+	;;
     stop)
-        echo -n "Shutting down PPPoE link"
-        $STOP > /dev/null 2>&1 || return=$rc_failed
-        echo -e "$return"
-        ;;
+	echo -n "Shutting down PPPoE link: "
+	$STOP > /dev/null 2>&1
 
+	# Remember status and be verbose
+	rc_status -v
+	;;
+    try-restart)
+	## Stop the service and regardless of whether it was
+	## running or not, start it again.
+	$0 stop
+	$0 start
+
+	# Remember status and be quiet
+	rc_status
+	;;
     restart)
-        $0 stop
-        echo "Waiting" $restart_time "seconds for the host to reset itself"
-        sleep $restart_time  #Note: Need time for host to reset itself
-        $0 start
-        ;;
-
+	$0 stop
+	echo "Waiting" $restart_time "seconds for the host to reset itself"
+	sleep $restart_time  #Note: Need time for host to reset itself
+	$0 start
+
+	# Remember status and be quiet
+	rc_status
+	;;
+    reload|force-reload)
+	echo -n "Reload PPPoE link: "
+	rc_failed 5
+
+	# Remember status and be verbose
+	rc_status -v
+	;;
     status)
-        $STATUS
-        ;;
-
+	echo -n "Checking PPPoE link: "
+	# Return value is slightly different for the status command:
+	# 0 - service up and running
+	# 1 - service dead, but /var/run/  pid  file exists
+	# 2 - service dead, but /var/lock/ lock file exists
+	# 3 - service not running (unused)
+	# 4 - service status unknown :-(
+	# 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.)
+	RET=`$STATUS > /dev/null 2>&1; echo $?`
+	chk_status $RET
+
+	# Remember status and be verbose
+	rc_status -v
+	;;
     *)
-        echo "Usage: pppoe {start|stop|restart|status}"
-        exit 1
+	echo "Usage: pppoe {start|stop|restart|status|try-restart}"
+	exit 1
 esac
+rc_exit
 
-exit 0

Places

File rp-pppoe-3.10-init.patch of Package rp-pppoe

Places