File pure-ftpd.changes of Package pure-ftpd
-------------------------------------------------------------------
Tue Apr 9 06:52:55 UTC 2019 - Christophe Giboudeaux <christophe@krop.fr>
- Add the missing build dependency for Tumbleweed.
-------------------------------------------------------------------
Fri Mar 1 17:09:05 UTC 2019 - psimons@suse.com
- Apply "pure-ftpd-malloc-limit.patch" to add a configuration
option that sets the process memory limit used by "ls" for
globbing. The value can be specified as optional third argument
to "-L" (or LimitRecursion in config file). Because it's
optional, the old configuration files will still work without
change with new binaries and update will be smooth. This change
allows sites that store an extremely large set of files inside a
single directory to tune their installation so that the "ls"
command in that directory will succeed without exceeding the ftpd
process memory limit. [bsc#1119187]
-------------------------------------------------------------------
Sun Feb 18 05:45:16 UTC 2018 - avindra@opensuse.org
- Version update to 1.0.47:
* If TLS was only enabled on the control channel (-Y 1), the STAT
command would send its output as other directory listing
commands, breaking the TLS stream. This has been fixed.
* The system user “_ftp” can be used as an alternative to “ftp”
for anonymous sessions.
* Compatibility with libsodium > 1.0.12 was added (including
minimal mode).
* The prefix for Argon2-hashed passwords in LDAP has been changed
to “{argon2}” (from “{argon2i}”). Ditto for MySQL and
PostgreSQL: the authentication method is now called “argon2”
instead of “argon2i”, and includes both Argon2i and Argon2id.
- use https for main site and source download
- switch to bz2 tarball (smaller)
-------------------------------------------------------------------
Thu Jun 15 08:40:15 UTC 2017 - tchvatal@suse.com
- Version update to 1.0.46:
* Fix build with openssl-1.1
* The Perl and Python wrappers are gone
* TLS v1.0 sessions are now refused
* Unmaintained contributions have been removed
* File globbing could take up to `GLOB_TIMEOUT` seconds
(17 seconds by default) when matching some patterns, no matter what the
configured recursion level was.
- Refresh patches:
* pure-ftpd-1.0.20_config.patch
* pure-ftpd-1.0.20_doc.patch
- Drop patch pure-ftpd-1.0.32-portrange.patch
* The upstream no longer provide pure-config.pl/py scripts for launching
* This also means the initscript and service were tweaked to reflect this
- Disable xinetd on systemd having versions where we can stick to socket
based services instead
* By default it does not make sense to have this service socket activated
tho so leave it to user to provide this
-------------------------------------------------------------------
Wed Jun 14 11:32:59 UTC 2017 - psimons@suse.com
- Fix broken pure-ftpd.init script. We cannot use startproc to run
/usr/sbin/pure-config.pl, because the utility assumes that the
name of that executable matches the name of the started process,
which it does not in our case. Furthermore, the start script will
write a status message to stdout, so we don't have to do it in
the init script. [bsc#1042690]
-------------------------------------------------------------------
Sat May 27 12:12:01 UTC 2017 - psimons@suse.com
- Fix build on SUSE:SLE-11, which doesn't define the RPM variable
%{_initddir}, so we have to use %{_sysconfdir}/init.d instead.
-------------------------------------------------------------------
Fri May 19 13:32:57 UTC 2017 - psimons@suse.com
- pure-ftpd-apparmor.patch: Add an AppArmor profile (based on the
one from SLE11).
- The Factory version of pure-ftp will replace the older package in
SLE-11 as per fate#321125. That update brings the following
changes:
* These patches have been updated and renamed in the process:
* pure-ftpd-1.0.22-default_tcp_sedrcv_buffer_size.patch is now
in pure-ftpd-1.0.32-default_tcp_sedrcv_buffer_size.patch.
* pure-ftpd-1.0.21-portrange.patch is now in
pure-ftpd-1.0.32-portrange.patch.
* pure-ftpd-1.0.32-cap-audit-write.patch is now in
pure-ftpd-1.0.36-cap-audit-control.patch.
* These patches are obsolete now and have been removed:
* 0001-Act-like-a-server-even-in-TLS-mode-when-in-active-mo.patch
* 0002-Init-a-TLS-data-session-after-having-sent-the-go-ahe.patch
* 0003-add-opt_a-to-donlist.patch
* 0004-support-stat-over-tls.patch
* 0005-speedup-TLS-listing.patch
* pure-ftpd-1.0.20_config_minuid.patch
* pure-ftpd-1.0.22-fix-listing-if-directory-has-white-space-in-it.patch
* pure-ftpd-1.0.22-flush-cmd-after-tls.patch
* pure-ftpd-1.0.22-oes-bugfix-1.patch
* pure-ftpd-1.0.22-oes-bugfix-2.patch
* pure-ftpd-1.0.22-oes-bugfix.patch
* pure-ftpd-1.0.22-oes-disable-ascii.patch
* pure-ftpd-1.0.22-oes_remote_server.patch
* pure-ftpd-1.0.22-wait-on-tls-handshake.patch
* pure-ftpd-allow-crypto-settings.patch
* pure-ftpd-remove-gpl-code.patch
-------------------------------------------------------------------
Fri Aug 5 11:32:12 UTC 2016 - tchvatal@suse.com
- Kill omc xml file useless nowdays
- Version update to 1.0.43:
* -J switch has been fixed
* openBSD compat changes
* Passwords are now hashed using Argon2i, default for puredb accounts now
-------------------------------------------------------------------
Tue May 10 21:36:36 UTC 2016 - wr@rosenauer.org
- fix systemd unit file so the service actually starts (boo#872430)
-------------------------------------------------------------------
Thu Apr 14 12:41:54 UTC 2016 - tchvatal@suse.com
- Add -fvisibility=hidden for bnc#971980
-------------------------------------------------------------------
Sat Jan 16 13:41:42 UTC 2016 - mpluskal@suse.com
- Add gpg signature
-------------------------------------------------------------------
Fri Jan 8 10:58:04 UTC 2016 - tchvatal@suse.com
- Version update to 1.0.42:
- Compilation fix for OpenBSD and Bitrig when Pure-FTPd is not
compiled with libsodium.
- The connection is now dropped if HTTP commands are received.
- LDAP force_default_gid and force_default_uid now work as documented.
- The ONLY_ACCEPT_REUSED_SSL_SESSIONS switch (introduced in Pure-FTPd
1.0.22 circa 2009, but disabled back then due to client compatibility
concerns) is now on by default, except in broken clients compatibility mode.
- libmariadb is looked for in addition to libmysqlclient
- MySQL: my_make_scrambled_password() is not always an exported
symbol any more, so pure-ftpd now ships a reimplementation.
- openssl/ec.h is not available on some Linux distributions that
disable EC in OpenSSL. This is being tested by autoconf.
- New command-line switch: -2/--certfile= to set the path to the
certificate file when using TLS.
- Support for TCP_FASTOPEN added on Linux
- The LDAP configuration file didn't allow a default gid without also
defining a default uid. This is no longer the case.
- OpenBSD's glob() left the glob_t structure uninitialized if the
pattern was larger than PATH_MAX, causing globfree() to free() an
unwanted pointer. The bug was introduced in Pure-FTPd 1.0.34.
- Refresh patch:
* pure-ftpd-1.0.20_config.patch
-------------------------------------------------------------------
Fri Jun 5 08:38:25 UTC 2015 - tchvatal@suse.com
- Reenable sle11 builds I need for testing.
-------------------------------------------------------------------
Fri Jun 5 07:51:32 UTC 2015 - tchvatal@suse.com
- Remove gpg/keyring, not provided now by upstream
- Cleanup with spec-cleaner
- Update to latest upstream 1.0.39:
* Explicitly include openssl/ec.h for OpenSSL 0.9.8 (CentOS 5)
* Retry if SSL_shutdown() returns -1 and SSL_ERROR_WANT_(READ|WRITE)
* The default cipher suite is now
ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:AES:CAMELLIA:DES-CBC3-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!aECDH:!EDH-DSS-DES-CBC3-SHA:!EDH-RSA-DES-CBC3-SHA:!KRB5-DES-CBC3-SH
* TLS forward secrecy support was added. DH parameters are loaded from
TLS_DHPARAMS_FILE, if present. ECDH is also supported - Default curve
is prime256v1 (TLS_DEFAULT_ECDH_CURVE). The best curve is automatically
selected when using LibreSSL.
* scrypt hashed passwords can be used in the MySQL, PostgreSQL and
LDAP backends.
* The -C: prefix can be added to the cipher suite in order to make valid
client certificates mandatory. This is no longer a compile-time option.
* The Clear Command Channel (CCC) command is now supported.
* pure-config.py is compatible with Python 3.
* SSL (v2, v3) is refused by default.
* The PureDB backend supports the scrypt function in order to hash
passwords. This is the preferred algorithm, but requires the presence
of libsodium.
* DES-hashed passwords are not supported any more.
* LDAP uid and gid values can over overridden in the LDAP configuration file.
* RC4 was killed.
- Refreshed patches:
* pure-ftpd-1.0.20_config.patch
* pure-ftpd-1.0.20_doc.patch
* pure-ftpd-1.0.20_ftpwho_path.patch
-------------------------------------------------------------------
Wed Apr 9 17:04:26 UTC 2014 - crrodriguez@opensuse.org
- Remove all init scripts but keep the rc link working.
-------------------------------------------------------------------
Wed Jan 23 08:43:56 UTC 2013 - mvyskocil@suse.com
- fix bnc#789833: pure-ftpd login failes
* pure-ftpd-1.0.36-cap-audit-control.patch
- remove oes related patches have never used at openSUSE
* pure-ftpd-1.0.20-oes_remote_server.patch
* pure-ftpd-1.0.22-oes-bugfix-534424.patch
- change old PreReq to Requires(pre)
- add version to pureftpd symbol
-------------------------------------------------------------------
Thu Nov 29 19:06:23 CET 2012 - sbrabec@suse.cz
- Verify GPG signature.
-------------------------------------------------------------------
Wed Aug 29 07:14:29 UTC 2012 - mvyskocil@suse.cz
- add gpg signature file for easier verification
-------------------------------------------------------------------
Wed Aug 29 04:33:03 UTC 2012 - crrodriguez@opensuse.org
- systemd: Do not fork in the background
-------------------------------------------------------------------
Fri Apr 20 11:55:23 UTC 2012 - highwaystar.ru@gmail.com
- spec file: fixed pure-ftpd.service file installation
-------------------------------------------------------------------
Tue Apr 10 11:39:50 UTC 2012 - mvyskocil@suse.cz
- update to 1.0.36 :
- Sync built-in glob(3) code with OpenBSD-current, and remove code we
don't use instead of ifdef'ing it.
- Repair checkproc() on Linux when support for capabitilies is
compiled in. Reported by Eric Gouyer.
- Don't read /dev/*random every time we need a value. Just use
arc4random() everywhere and seed it before we possibly chroot().
- Add support for MFMT, with the same code as SITE UTIME.
- Support 2-arguments SITE UTIME.
- LDAP: Add LDAPDefaultHomeDirectory, suggested by Landry Breuil.
- Add SSL_OP_NO_SSLv3 to SSL options if the list of ciphers is
prefixed by -S: , needed by Brad.
- Use more paranoid compiler options whenever possible, and preliminary
uncluttering of the autoconf script.
- Try to cache locale-related data at startup after tzset(), rather
than during a session.
- Fix quota computation after rename() overwrites an existing file.
Reported by Hiramoto Koujo, thanks!
- Improved autoconf detection of -fstack-protector and -fPIE
- If 10 digits are not enough to print the size of a file in an
ls-like output, bump the max number of digits to 18. This adds support for
files up to 1 exabyte.
- Don't display dot files (except . and ..) if dot_read_ok is 0 in
donlist() - but not in sglob() yet. This change is purely cosmetic. There are
many ways to figure out if a file exists.
- document bnc#756306: pure-ftpd umask setting not working properly
* /etc/pure-ftpd/pure-ftpd.conf contains a note about a side-effect of pam_umask
- add native pure-ftpd.service for systemd-powered systems
- use the same way how to start the daemon in sysvinit script and put
$remote_fs dependency
usr/sbin/pure-config.pl /etc/pure-ftpd/pure-ftpd.conf --daemonize
-------------------------------------------------------------------
Wed Jun 22 08:31:38 UTC 2011 - mvyskocil@suse.cz
- fix bnc#700611 - pure-ftpd fails with pam
* pure-ftpd-1.0.32-cap-audit-write.patch
-------------------------------------------------------------------
Fri May 27 22:23:06 UTC 2011 - alexandre@exatati.com.br
- Update to 1.0.32:
- Support SHA1 password hashing in MySQL and PostgreSQL backends
- Support for braces expansion in directory listings has been
disabled - Cf. CVE-2011-0418
- Aditional changes FROM 1.0.31:
- Introduce --tlsciphersuite (-J) to set the list of allowed ciphers,
thanks to Todd Rinaldo.
- The -F switch has been documented in the built-in help.
- Shell-like escaping is now partially handled when emulating the "ls"
command.
- Use my_make_scrambled_password() instead of make_scrambled_password().
Suggested by Arkadiusz Miskiewicz.
- Refresh and fix patch for [bnc#407363]:
- old: patch pure-ftpd-1.0.22-default_tcp_sedrcv_buffer_size.patch
- new: patch pure-ftpd-1.0.32-default_tcp_sedrcv_buffer_size.patch
- Refresh PassivePortRange patch:
- old: pure-ftpd-1.0.21-portrange.patch
- new: pure-ftpd-1.0.32-portrange.patch
-------------------------------------------------------------------
Mon Apr 11 11:56:20 UTC 2011 - mvyskocil@suse.cz
- update to 1.0.30
* pure-quotacheck can now work with a large number of files.
* OPTS UTF-8 is now an alias to OPTS UTF8.
* Fix a STARTTLS flaw similar to Postfix’s CVE-2011-0411. If you’re using
TLS, upgrading is recommended.
* Provide ANSI-compliant MySQL configuration example.
* Fix some issues with man pages.
-------------------------------------------------------------------
Thu Oct 7 13:29:41 UTC 2010 - mvyskocil@suse.cz
- add pure-ftpd-1.0.22-oes-bugfix-534424.patch for tracking OES patches
- use macro with_oes to determine if OES patches might be applied or not
-------------------------------------------------------------------
Tue Sep 14 18:24:00 UTC 2010 - cristian.rodriguez@opensuse.org
- Use with-rfc2640 [bnc#638626]
-------------------------------------------------------------------
Tue Jul 20 15:32:37 UTC 2010 - cristian.rodriguez@opensuse.org
- add missing buildRequires on libcap-devel
-------------------------------------------------------------------
Tue May 25 13:10:33 UTC 2010 - cristian.rodriguez@opensuse.org
- $remote_fs --> network-remotefs
-------------------------------------------------------------------
Fri May 14 18:34:37 UTC 2010 - alexandre@exatati.com.br
- Added "--with-virtualchroot" option;
- Spec file cleaned with spec-cleaner;
- updated to version 1.0.29:
- max_dlmap_size was size_t instead off_t, causing misalignment while
downloading > 4 Gb files on a 32-bits arch.
- pread() vs lseek()+read() was a useless optimization, since pread()
doesn't change the file position and further reads weren't going through
plain read() calls.
- iconv_fd_* should be initialized by (iconv_t) -1 as we test them upon
exit. Fixes segfaults on glibc.
- pure-uploadscript tries to reach the pipe during 30 seconds instead of 10.
- changes in version 1.0.28:
- FTPD_PAM_SERVICE_NAME can be defined in order to change the PAM service
name.
- When an upload gets renamed (--autorename), send the new name to the
uploadscript instead of the original one.
- The ALLO command now checks for the actual disk space in addition to the
virtal quota.
- Work around OSX broken poll()
- After an atomic resumed upload, don't append the previous file size to the
quota.
- Always accept OPTS UTF8 ON, but refuse OPTS UTF8 OFF if client_charset is
UTF8.
- Fix AUTHD_ENCRYPTED
- Reset the CWD failures counter after a successful directory has been
created. It avoids spurious disconnections with ncftp.
- Support for iPhone has been moved to another branch.
- Fix crash with PostgreSQL.
-------------------------------------------------------------------
Fri Feb 12 15:27:50 UTC 2010 - mseben@novell.com
- updated to version 1.0.27:
- Have pureftpd_shutdown() shut the server down even if a client is
connected on iPhone.
- Allow users with no quota to delete .pureftpd-upload-* files.
- Unbreak ipv6 support, reported by Brad Smith.
- Disable SSLv3 renegotiation if an old SSL library is used. If you really
want to re-enable SSLv3 renegotiation, even with a recent library, you can
always define ACCEPT_SSL_RENEGOTIATION.
- changes in version 1.0.26:
- Fix incompatibilities with Cyberduck when TLS is enabled.
- Don't TLS_accept() immediately after accept(). Reply on the connection
socket first, so that clients don't have to wait before knowing that they
can actually use TLS. It avoids lags with LFTP and hangs with Cyberduck.
- Properly change the process name on Linux when the -S option is used, by
Margus Kaidja.
- Unbreak authentication of non-chrooted users. Thanks to Juergen Daubert
for the bug report.
- changes in version 1.0.25:
- Show symlinks as symlinks in MLSD, except when the broken client
compatibility mode is turned on and links are not dangling (just like the
old LIST and NLIST commands). Reported by Mime Cuvalo.
- More gcc 2 compatibility, thanks to Todd Rinaldo.
- Properly handle custom paths in man pages. Thanks to Scott Haneda and
Mathieu Parisot.
- Have $localstatedir default to /var as it used to be unless
--localstatedir=... is explicitely passed to ./configure
- Use @VERSION@ in man pages.
- --without-pam disables PAM on OSX and iPhone.
- Allow cross-compilation.
- Experimental iPhone target.
- Change the way it links, building a library first.
- Don't use mmap() any more for downloads. It's too slow.
- Don't use hard-coded paths in order to find MySQL and PostgreSQL
libraries and header files. Use mysql_config and pg_config instead.
Suggested by John Alberts.
- Log the DELE command similar to the RETR and STOR commands. Suggested by
Martin Fuxa.
- The primary group gets cached so that it's always displayed in directory
listings.
- Avoid a client process to burn CPU in an infinite loop if the command
channel gets disconnected before the data channel. Reported by Thomas Min
and Margus Kaidja.
- Restore the traditional behavior of a download restarting at the end of a
file. For some weird reasons, some clients still insist on doing that. Don't
send a 55x return code, just let them download... nothing.
- Documentation updates.
- changes in version 1.0.24:
- Refuse empty passwords in LDAP bind mode. Reported by Henning Brauer.
- The package can now be compiled with gcc 2.
- changes in version 1.0.23:
- LDAP: accept "enabled" as a correct value for FTPStatus as it used to be.
- More useful error logging for OpenSSL errors.
- Don't read certificates twice.
- Fix compilation on Solaris with privsep, thanks to Ritesh Patel.
- Don't replace : (as in IPv6 addresses) in host names. Thanks to Tero Pelander.
- Add SUP top AUXILIARY to LDAP schema, suggested by Zhang Huangbin.
- Don't ignore dot files even if -D is not supplied with the MLSD command.
- Deinline code
- Throttling more reliable
- STAT is now working over TLS
- DH keys for ephemeral key exchange are now handled
- Fix libiconv checking
- The column was missing in the PassivePortRange comment (thanks to Igor Alexadrov)
- LDAP authentication through binding is now possible in addition to
passwords. This allows for the FTP server to run with an unprivileged LDAP
account. It also adds a warning if auth method password is used and doesn't find
a userPassword attribute. This usually indicates that the LDAP bind DN
cannot read the attributes, because it doesn't have sufficient privileges.
Contributed by Wilco Baan Hofman.
- Perform charset conversions on directory names. Issue spotted by Xianghu Zhao.
- Almost a complete rewrite of the upload, download and TLS code for more
reliability
- Seemlessly handle ABOR without any SIGURG
- Try to immediately handle any kind of disconnection
- Use poll() rather than select() as much as possible
- Distinguish aborted (even the hard way) and completed download and upload
operations in log files
- Minor corrections to he French messages
- Don't use atomic uploads unless --notruncate or --autorename have been
enabled
- Take care of removing .pureftpd-upload-* files in every possible case
- List up to 10000 files per directory per default instead of 2000
- Don't mess with TCP_NOPUSH, as it interferes with OpenSSL
- New compile-time option: --with-implicittls in order to build a FTPS-only
server
- ./configure --localstatedir can now be used in order to avoid storing the
scoreboard and other dynamic files in /var/run/
- Quota handling reworked (easier, and way more reliable)
- RNTO support even when quota are enabled.
- A bunch of return codes were fixed to be more RFC-conformant.
- ALLO command is now actually checking if an upload can occur without
blowing the quota.
- Don't change the TCP window size. Admins should do this as part of their
system configuration.
- Privsep is now enabled by default. Use --without-privsep to disable.
- --without-banner is gone. If you have a cookie file (-F), the default
banner won't be displayed.
- Compile with PAM by default on OSX.
- Switch the privsep process to _pure-ftpd or pure-ftpd when no privileged
call is actually necessary. Since only the effective uid chances, it's not
brutally useful yet, but it paves the way for forthcoming changes.
- Install man pages with local paths instead of hard-coded ones.
-------------------------------------------------------------------
Tue Jan 12 10:23:12 UTC 2010 - mseben@novell.com
- modified portrange.patch - for PassivePortRange option in pure-ftpd.conf
we could use now also syntax without colon (bnc#547578)
- merged config.patch with config_minuid.patch
-------------------------------------------------------------------
Fri Jun 5 13:38:32 CEST 2009 - coolo@novell.com
- fix build
-------------------------------------------------------------------
Mon May 25 13:52:55 CEST 2009 - hvogel@suse.de
- Update to version 1.0.22
- New catalan translation
- TLS support for LDAP
- Fix usage of MySQL 5 stored procedures
- Compatibility with newer OpenLDAP versions
- Don't hang up during uploads if we get any other command than QUIT and
ABORT.
- SITE UTIME reads UTC time
- A space is needed for inline content in response to the MLST command.
- Time zone issues should be fixed for good. We have to redefine TZ,
tzset() is not enough on Linux when we are in a chroot environment.
- Correctly respond to FEAT without removing extra features when passive
mode is disabled. Thanks to upb.
- Better process name change setup for Linux.
- Auto-created home directories are now created with mode 0777 (and
directory umask is applied), per common request. It's very important to
double check your umask.
- Extend gid / uid to 10 digits in ls output. Extend file size as well.
- Brazilian portuguese translation was updated.
- Fix SecureFX compatibility.
- Use PQescapeStringConn() for PostgreSQL instead of hand-made escaping.
- Don't respond to server that an upload succeeded before the temporary
file has been renamed.
- TLS support on data channels
- Use sendfile() on recent Solaris versions in place of sendfilev().
- Don't use a deprecated interface for Bonjour registration.
- Tell authentication handlers if the connection is encrypted or not,
through a new AUTHD_ENCRYPTED environment variable.
- Create all directories, not only the basement when on-demand directory
creation is enabled and the user's home directory looks like /basement/./user.
- Fixed error reporting when TLS support was compiled in, but TLS wasn't
enabled on the current session
- Log full path on file deletion
- Handle "ftp" and "anonymous" like normal accounts (with passwords) if -E
(no anonymous logins) is specified. Thanks to Arkadiusz Miskiewicz.
- Sleep before answering a password failure, not the other way round
- In broken mode, show symlinks as their real target. It can have side
effects, don't forget that broken mode is... broken mode.
- Respect aliasing rules for sockaddr_storage usage.
- Privsep is enabled by default in the installation GUI.
- --with-everything now includes privsep.
- update: fix compilation with gcc 2.x
-------------------------------------------------------------------
Thu Jan 15 13:00:31 CET 2009 - hvogel@suse.de
- Move PassivePortRange to numparic_switch_for [bnc#465954]
-------------------------------------------------------------------
Mon Sep 15 14:50:54 CEST 2008 - hvogel@suse.de
- limit port range for passv to 30000:30100 to assist firewalling
[bnc#420671]
-------------------------------------------------------------------
Mon Jul 21 16:34:26 CEST 2008 - hvogel@suse.de
- do not use tcp send/receive buffer optimization. Might lead to
strange side effects when allocating too much stack. [bnc#407363]
-------------------------------------------------------------------
Tue Apr 1 16:19:13 CEST 2008 - mkoenig@suse.de
- remove dir /usr/share/omc/svcinfo.d as it is provided now
by filesystem
-------------------------------------------------------------------
Thu Mar 20 15:42:03 CET 2008 - hvogel@suse.de
- Fix ldap schema [bnc:368864]
- add Short-Description to init script
-------------------------------------------------------------------
Tue Mar 27 14:53:53 CEST 2007 - mskibbe@suse.de
- change path to firewall script (#247352)
-------------------------------------------------------------------
Fri Mar 2 08:38:24 CET 2007 - mskibbe@suse.de
- change path to firewall script (#247352)
-------------------------------------------------------------------
Wed Feb 28 08:54:05 CET 2007 - mskibbe@suse.de
- pure-ftpd - Support for FATE #300687: Ports for SuSEfirewall
added via packages (#246931)
-------------------------------------------------------------------
Thu Jan 11 09:55:19 CET 2007 - mskibbe@suse.de
- change path to xml service document (fate #301713)
-------------------------------------------------------------------
Wed Dec 6 12:48:34 CET 2006 - mskibbe@suse.de
- add service xml document (fate #301713 )
-------------------------------------------------------------------
Wed Sep 6 14:36:48 CEST 2006 - mskibbe@suse.de
- fix bug Bug 203798 - Restarting the ftp server using the
"rcpure-ftpd stop/start" doesn't stop/kill the existing
client-server instances
-------------------------------------------------------------------
Mon Sep 4 11:15:57 CEST 2006 - kukuk@suse.de
- Add pam_loginuid.so to session management
-------------------------------------------------------------------
Thu Aug 31 07:59:18 CEST 2006 - mskibbe@suse.de
- update to version 1.0.21 which
o includes patch pure-ftpd-1.0.20-abort-transfer.patch
o Rendezvous has been renamed Bonjour
o The old PAM sample has been removed
o -F option added to pure-pw
o MAX_USER_LENGTH has been bumped to 127 due to popular demand
o pam/* can now be used if security/* doesn't exist
o simplify() simplifies paths ending by /. and /..
o Experimental support for RFC2640 (UTF-8 filename encoding)
o The LDAP schema has been changed: FTPStatus should be a boolean
o OPTS MLST has been implemented
o SITE UTIME has been implemented
o TCP_CORK is on by default again. A new configure switch,
--without-cork, can disable it
o Correctly format %c and %% in fakesprintf()
o The connection socket is now created with the Nagle algorithm
disabled. It was the trick to dramatically improve performance
when transfering a lot of small files
o Use CLIENT_MULTI_STATEMENTS while connecting to a MySQL server
-------------------------------------------------------------------
Mon Aug 21 21:31:34 CEST 2006 - kukuk@suse.de
- Reorder auth section of PAM config file to make sure all modules
will always be evaluated.
-------------------------------------------------------------------
Mon Apr 10 17:04:23 CEST 2006 - mrueckert@suse.de
- added pure-ftpd-1.0.20_config_minuid.patch:
* configuration-file/pure-ftpd.conf.in: our ftp user has uid 40.
if you want to map virtual users to this uid they would be
blocked from login.
- added pure-ftpd-1.0.20_ftpwho_path.patch:
* src/ftpwho-update.h: PAGE_SIZE is a function on
glibc-2.4/kernel-2.6.16 on ppc64. use PATH_MAX for the filename
member of the FTPWhoEntry_ struct
-------------------------------------------------------------------
Wed Jan 25 21:40:41 CET 2006 - mls@suse.de
- converted neededforbuild to BuildRequires
-------------------------------------------------------------------
Mon Jan 16 16:40:55 CET 2006 - hvogel@suse.de
- Patch from Patrick Gosling to handle transfer aborts during file
upload correctly. [#133452]
-------------------------------------------------------------------
Fri Jan 13 15:05:03 CET 2006 - hvogel@suse.de
- Make use of Stack Protector
-------------------------------------------------------------------
Mon Oct 24 22:06:55 CEST 2005 - mrueckert@suse.de
- cleaned up spec file
- add /etc/pure-ftpd/vhosts as base dir for virtual servers.
(documentation and code changed accordingly.)
- fixed paths in the documenation
-------------------------------------------------------------------
Thu Oct 13 12:48:35 CEST 2005 - hvogel@suse.de
- Build with DLDAP_DEPRECATED untill upstream applied one of the
various ldap patches floating around on the sf.net project page
-------------------------------------------------------------------
Wed Aug 24 12:06:08 CEST 2005 - hvogel@suse.de
- disable "funny" ftp messages to be a bit more professional
-------------------------------------------------------------------
Mon Nov 8 17:19:11 CET 2004 - kukuk@suse.de
- Use common-* PAM config files for pure-ftpd PAM configuration
-------------------------------------------------------------------
Thu Aug 12 12:40:48 CEST 2004 - mmj@suse.de
- Use --with-diraliases
-------------------------------------------------------------------
Thu Aug 12 10:48:44 CEST 2004 - mmj@suse.de
- Update to 1.0.20 which fixes compatibility issues.
-------------------------------------------------------------------
Wed Jun 23 20:38:56 CEST 2004 - mmj@suse.de
- Update to 1.0.19 including:
o Real disk space is no more shown.
o A possible denial of service when too many users were connected
should be fixed.
-------------------------------------------------------------------
Tue Mar 2 23:22:41 CET 2004 - mmj@suse.de
- Reflect in the configuration file that /etc/pure-ftpd/ now is a
place to keep all the pure-ftpd configuration files.
-------------------------------------------------------------------
Tue Mar 2 22:42:02 CET 2004 - mmj@suse.de
- Move configuration file when updating
- Fix initscript to use /etc/pure-ftpd/pure-ftpd.conf [#35196]
- Update to 1.0.18 including:
o UTF-8 characters are now supported in file names [#34829]
o Buglets were fixed in the documentation.
o Two new translations were added : hungarian and catalan
o The server now uses distinct IPv4 and IPv6 to listen to both
protocols on all operating systems. A new switch, -6, forces the
server to only listen to IPv6.
o W3C and CLF alternative log formats are now more standard
conformant.
o Pure-FTPd can now produce WU-FTPd (xferlog) compatible log files.
o Support for Rendezvous was added on MacOS X.
o Support for Apple / GNUStep plist data output was added to
pure-ftpwho.
-------------------------------------------------------------------
Fri Feb 27 18:27:16 CET 2004 - mmj@suse.de
- Enable mysql and postgresql support, since they provide very
good functionality with only tiny extra dependencies
- Compile with --with-nonalnum to support non alphanumeric chars
-------------------------------------------------------------------
Fri Jan 16 13:26:06 CET 2004 - kukuk@suse.de
- Add pam-devel to neededforbuild
-------------------------------------------------------------------
Thu Dec 4 14:10:58 CET 2003 - mmj@suse.de
- Update to pure-ftpd v. 1.0.17a
-------------------------------------------------------------------
Wed Oct 15 12:59:03 CEST 2003 - mmj@suse.de
- Don't build as root
-------------------------------------------------------------------
Tue Aug 12 10:55:04 CEST 2003 - mmj@suse.de
- Update to 1.0.16, with SSL/TLS support and many bugfixes
- Use new macros for stop/restart of services on rpm update/removal
-------------------------------------------------------------------
Sun Jul 27 11:19:20 CEST 2003 - mmj@suse.de
- Support system quotas
-------------------------------------------------------------------
Tue Jun 17 13:09:47 CEST 2003 - mmj@suse.de
- Update to version 1.0.15:
- A turkish translation has been added.
- Various functional and portability fixes have been made to the
handling of upload scripts, to the pure-pw command and to the
automatic creation of home directories.
- Accounts in a puredb database can now be quickly listed.
- The anonymous FTP directory can now be overriden on the Windows
port (using a WIN32_ANON_DIR environment variable).
- The default banner has been stripped down to look more
professionnal.
- Transfer speed on BSD systems has been improved.
- The license of the whole package has changed from GPL to a
simplified BSD license.
-------------------------------------------------------------------
Thu May 15 12:41:00 CEST 2003 - mmj@suse.de
- Allow dot-files in general, but prohibit writing of them [#26897]
-------------------------------------------------------------------
Wed Apr 30 12:42:52 CEST 2003 - mmj@suse.de
- Apply the detach patch elsewhere to not break xinetd
- Add note to the xinetd conffile about the xinetd behaviour
- Rearrange the specfile a bit
-------------------------------------------------------------------
Thu Mar 6 16:33:14 CET 2003 - mmj@suse.de
- Fix the xinetd configuration file
-------------------------------------------------------------------
Fri Feb 28 15:32:38 CET 2003 - mmj@suse.de
- Add note to README.LDAP about use_ldap in the pam config
-------------------------------------------------------------------
Fri Jan 31 14:33:01 CET 2003 - mmj@suse.de
- Update to 1.0.14 and add a xinetd configuration file just in case
the user wants to use it with xinetd. Default behaviour is still
standalone.
-------------------------------------------------------------------
Mon Jan 20 20:42:56 CET 2003 - mmj@suse.de
- Added patch to detach from fd 0, 1 and 2 [#22836]
-------------------------------------------------------------------
Wed Nov 27 14:02:07 CET 2002 - mmj@suse.de
- Update to 1.0.13a which is a minor feature/bugfix-release
-------------------------------------------------------------------
Sat Oct 5 02:34:37 CEST 2002 - ckm@suse.de
- Changed default config file to only allow ro anonymous logins,
and tightened security in case writing is enabled.
-------------------------------------------------------------------
Sat Aug 3 15:16:27 CEST 2002 - kukuk@suse.de
- Remove symlinks in postinstall script
- Add PreRequires for insserv
-------------------------------------------------------------------
Thu Jul 4 16:59:51 CEST 2002 - kukuk@suse.de
- Update to version 1.0.12 (per-user limits)
-------------------------------------------------------------------
Fri Apr 26 16:27:00 CEST 2002 - kukuk@suse.de
- Update to version 1.0.11 (minor bug fixes, better LDAP support)
-------------------------------------------------------------------
Mon Mar 11 09:48:02 CET 2002 - kukuk@suse.de
- Fix permissions
-------------------------------------------------------------------
Sat Feb 16 21:15:14 CET 2002 - kukuk@suse.de
- Fix print arguments [Bug #13389]
-------------------------------------------------------------------
Mon Feb 11 18:12:54 CET 2002 - ro@suse.de
- flgs in perl-config parser is an array
-------------------------------------------------------------------
Thu Jan 24 20:51:42 CET 2002 - kukuk@suse.de
- Update to version 1.0.8
- Compile with LDAP support
-------------------------------------------------------------------
Thu Nov 29 18:22:20 CET 2001 - kukuk@suse.de
- Add pam config file
- Cleanup example config file
-------------------------------------------------------------------
Thu Nov 22 17:09:45 CET 2001 - kukuk@suse.de
- Update to 1.0.3 (rename and quota fixes)
-------------------------------------------------------------------
Thu Nov 1 10:51:40 CET 2001 - kukuk@suse.de
- Initial release of a secure ftp server with LFS
