Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
openSUSE:Leap:15.1:Staging:C
s390-tools
s390-tools-sles15sp1-10-zdev-Implement-support-...
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File s390-tools-sles15sp1-10-zdev-Implement-support-for-early-device-configuratio.patch of Package s390-tools
Subject: zdev: Implement support for early device configuration From: Peter Oberparleiter <oberpar@linux.ibm.com> Summary: zdev: Add support for handling I/O configuration data Description: LPARs that are running in IBM Dynamic Partition Manager (DPM) mode can access a firmware-generated I/O configuration data file that contains s390-specific information about available I/O devices such as qeth device numbers and parameters, and FCP device IDs. This data file is intended to remove the need for users to manually enter the corresponding device data during installation. Linux kernels with the corresponding support make the I/O configuration data available at the following location: /sys/firmware/sclp_sd/config/data This patch set adds support for handling this data file using the chzdev and lszdev tools: - I/O configuration data can be applied using chzdev's --import option - Initial RAM-Disk scripts automatically apply the I/O configuration data to the system configuration - lszdev can be used to display the applied auto-configuration data - chzdev can be used to manually override the auto-configuration data Upstream-ID: 156450f359bb13776fac2130a1cac00a48c2deda Problem-ID: LS1604 Upstream-Description: zdev: Implement support for early device configuration Enable user to specify that a device should be configured early, that is during the initial RAM-disk boot phase. This may be necessary, e.g. to override auto-configuration for a device which is also applied during that boot phase. It may also be used to manually specify devices that are required to access the root file system, such as networking devices. Users can mark devices as requiring early configuration by specifying a value of 1 for the newly added internal attribute zdev:early: # chzdev dasd-eckd 0.0.1234 -p zdev:early=1 This can be changed back by removing the attribute setting, or by setting the attribute value to 0: # chzdev dasd-eckd 0.0.1234 -p -r zdev:early or # chzdev dasd-eckd 0.0.1234 -p zdev:early=0 Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> --- zdev/dracut/95zdev/module-setup.sh | 21 +------ zdev/include/internal.h | 5 + zdev/initramfs/hooks/zdev | 19 ++++++ zdev/man/chzdev.8 | 29 ++++++++++ zdev/src/chzdev.c | 4 - zdev/src/ctc.c | 2 zdev/src/dasd.c | 3 + zdev/src/generic_ccw.c | 2 zdev/src/internal.c | 13 ++++ zdev/src/lcs.c | 2 zdev/src/qeth.c | 2 zdev/src/root.c | 82 ++++++++++++++++++++++------- zdev/src/zfcp_host.c | 2 zdev/src/zfcp_lun.c | 2 14 files changed, 152 insertions(+), 36 deletions(-) --- a/zdev/dracut/95zdev/module-setup.sh +++ b/zdev/dracut/95zdev/module-setup.sh @@ -45,23 +45,12 @@ install() { # Hook to parse zdev kernel parameter inst_hook cmdline 95 "$moddir/parse-zdev.sh" - # Obtain root device configuration - - # Exit early if root device type is unknown - if ! lszdev --by-path / >/dev/null 2>&1 ; then - return 0 - fi - + # Obtain early + root device configuration _tempfile=$(mktemp --tmpdir dracut-zdev.XXXXXX) - - if chzdev --export - --persistent --by-path / >/dev/null 2>&1 ; then - # Use persistent configuration - chzdev --export "$_tempfile" --persistent --by-path / --quiet --type - else - # Use active configuration - chzdev --export "$_tempfile" --active --by-path / --quiet --type - sed -i -e 's/active/persistent/g' "$_tempfile" - fi + chzdev --export "$_tempfile" --persistent --by-path / --quiet \ + --type 2>/dev/null + chzdev --export - --persistent --by-attrib "zdev:early=1" --quiet \ + --type 2>/dev/null >> "$_tempfile" # Apply via --import to prevent other devices from being configured chzdev --import "$_tempfile" --persistent --base "/etc=$initdir/etc" \ --- a/zdev/include/internal.h +++ b/zdev/include/internal.h @@ -12,7 +12,12 @@ #include <stdbool.h> +#include "attrib.h" + #define INTERNAL_ATTR_PREFIX "zdev:" +#define INTERNAL_ATTR_EARLY INTERNAL_ATTR_PREFIX "early" + +extern struct attrib internal_attr_early; const char *internal_get_name(const char *name); bool internal_by_name(const char *name); --- a/zdev/initramfs/hooks/zdev +++ b/zdev/initramfs/hooks/zdev @@ -10,7 +10,8 @@ # configuration data during boot. # -PREREQ="" +# Needs to run after udev or resulting udev rules could be overwritten +PREREQ="udev" prereqs() { @@ -37,3 +38,19 @@ done copy_exec /sbin/chzdev copy_exec /sbin/lszdev copy_exec /sbin/vmcp + +_tempfile=$(mktemp --tmpdir initramfs-zdev.XXXXXX) + +# Obtain early + root device configuration +chzdev --export "$_tempfile" --persistent --by-path / \ + --by-attrib "zdev:early=1" --quiet --type 2>/dev/null + +# Apply via --import to prevent other devices from being configured. +# Rename the resulting cio-ignore rule to ensure that it does not override +# the one copied by the initramfs udev hook to /lib/udev. +chzdev --import "$_tempfile" --persistent \ + --base "/etc/udev/rules.d/41-cio-ignore.rules=$DESTDIR/etc/udev/rules.d/41-cio-ignore-root.rules" \ + --base "/etc=$DESTDIR/etc" --yes --quiet --no-root-update --force \ + >/dev/null + +rm -f "$_tempfile" --- a/zdev/man/chzdev.8 +++ b/zdev/man/chzdev.8 @@ -334,6 +334,35 @@ a specific attribute. .PP . . +.SS "Special settings" +The following special settings affect how devices are handled by chzdev: +.PP +. +.BR zdev:early =0|1 +.RS 4 +Control in which stage of the boot process a device is activated: +.TP 4 +.B 0 +Device is activated normally during boot (default). +.PP +.TP 4 +.B 1 +Device is activated early in the boot process, by the initial RAM-disk. +.PP +Specify a value of 1 for this attribute in any of the following situations: +.TP 4 +\(bu +To ensure that your settings override auto-configuration settings. +.PP +.TP 4 +\(bu +To ensure that a device required to access the root file system is correctly +enabled during boot. An example would be a networking device, or a device that +is intended to extend a logical volume that provides the root file system. +.PP +.RE +. +. .SH ACTIONS You can use one of the action options listed below to specify the .B main tool action --- a/zdev/src/chzdev.c +++ b/zdev/src/chzdev.c @@ -3025,8 +3025,8 @@ int main(int argc, char *argv[]) if ((pers_mod_devs || pers_mod_devtypes) && !opts.no_root_check && !dryrun) { - /* If the root device/device type has been modified, additional - * work might be necessary. */ + /* If the root device/device type or early devices have been + * modified, additional work might be necessary. */ rc = root_check(); if (rc && !drc) drc = rc; --- a/zdev/src/ctc.c +++ b/zdev/src/ctc.c @@ -17,6 +17,7 @@ #include "ctc_auto.h" #include "device.h" #include "devtype.h" +#include "internal.h" #include "misc.h" #include "namespace.h" #include "path.h" @@ -425,6 +426,7 @@ static struct subtype ctc_subtype = { &ccw_attr_online, &ctc_attr_buffer, &ctc_attr_protocol, + &internal_attr_early, ), .unknown_dev_attribs = 1, .support_definable = 1, --- a/zdev/src/dasd.c +++ b/zdev/src/dasd.c @@ -16,6 +16,7 @@ #include "dasd.h" #include "device.h" #include "devtype.h" +#include "internal.h" #include "misc.h" #include "modprobe.h" #include "module.h" @@ -616,6 +617,7 @@ struct subtype dasd_subtype_eckd = { &dasd_attr_reservation_policy, &dasd_attr_last_known_reservation_state, &dasd_attr_safe_offline, + &internal_attr_early, ), .unknown_dev_attribs = 1, @@ -651,6 +653,7 @@ struct subtype dasd_subtype_fba = { &dasd_attr_reservation_policy, &dasd_attr_last_known_reservation_state, &dasd_attr_safe_offline, + &internal_attr_early, ), .unknown_dev_attribs = 1, --- a/zdev/src/generic_ccw.c +++ b/zdev/src/generic_ccw.c @@ -17,6 +17,7 @@ #include "devnode.h" #include "devtype.h" #include "generic_ccw.h" +#include "internal.h" #include "namespace.h" #include "path.h" #include "subtype.h" @@ -182,6 +183,7 @@ static struct subtype generic_ccw_subtyp .dev_attribs = ATTRIB_ARRAY( &ccw_attr_online, &ccw_attr_cmb_enable, + &internal_attr_early, ), .unknown_dev_attribs = 1, .generic = 1, --- a/zdev/src/internal.c +++ b/zdev/src/internal.c @@ -9,9 +9,22 @@ #include <stdbool.h> +#include "attrib.h" #include "internal.h" #include "misc.h" +struct attrib internal_attr_early = { + .name = INTERNAL_ATTR_EARLY, + .title = "Activate device early during boot", + .desc = "Control the time of activation of a device:\n" + " 0: Device is activated normally during boot\n" + " 1: Device is activated early in the boot process, by the\n" + " initial RAM-disk\n", + .defval = "0", + .accept = ACCEPT_ARRAY(ACCEPT_RANGE(0, 1)), + .internal = 1, +}; + /* Return identifier of internal attribute with specified @name. */ const char *internal_get_name(const char *name) { --- a/zdev/src/lcs.c +++ b/zdev/src/lcs.c @@ -15,6 +15,7 @@ #include "ccwgroup.h" #include "device.h" #include "devtype.h" +#include "internal.h" #include "lcs.h" #include "lcs_auto.h" #include "misc.h" @@ -362,6 +363,7 @@ static struct subtype lcs_subtype = { &ccw_attr_online, &lcs_attr_lancmd_timeout, &lcs_attr_recover, + &internal_attr_early, ), .unknown_dev_attribs = 1, .support_definable = 1, --- a/zdev/src/qeth.c +++ b/zdev/src/qeth.c @@ -15,6 +15,7 @@ #include "ccwgroup.h" #include "device.h" #include "devtype.h" +#include "internal.h" #include "misc.h" #include "namespace.h" #include "nic.h" @@ -1445,6 +1446,7 @@ struct subtype qeth_subtype_qeth = { &qeth_attr_vnicc_takeover_learning, &qeth_attr_vnicc_bridge_invisible, &qeth_attr_vnicc_rx_bcast, + &internal_attr_early, ), .unknown_dev_attribs = 1, .support_definable = 1, --- a/zdev/src/root.c +++ b/zdev/src/root.c @@ -8,11 +8,13 @@ */ #include <stdlib.h> +#include <string.h> #include "lib/util_path.h" #include "device.h" #include "devtype.h" +#include "internal.h" #include "misc.h" #include "path.h" #include "root.h" @@ -20,31 +22,78 @@ #include "setting.h" #include "subtype.h" -/* Determine if the root device was modified. If it was modified, run the - * corresponding root-install scripts. */ +static bool is_early_removed(struct device *dev) +{ + struct setting *s; + + s = setting_list_find(dev->persistent.settings, + internal_attr_early.name); + if (!s || !s->modified) + return false; + if (!s->actual_value || strcmp(s->actual_value, "1") != 0) + return false; + if (s->removed || strcmp(s->value, "0") == 0) + return true; + return false; +} + +static void add_early_removed(struct util_list *selected) +{ + int i, j; + struct devtype *dt; + struct subtype *st; + struct device *dev; + + for (i = 0; devtypes[i]; i++) { + dt = devtypes[i]; + for (j = 0; dt->subtypes[j]; j++) { + st = dt->subtypes[j]; + util_list_iterate(&st->devices->hash.list, dev) { + if (is_early_removed(dev)) { + selected_dev_list_add(selected, dt, st, + dev->id, NULL, EXIT_OK); + } + } + } + } +} + +/* Determine if initial RAM-disk needs updating. If so, run the corresponding + * scripts if available. */ exit_code_t root_check(void) { struct util_list *selected, *params, *mod = NULL; struct selected_dev_node *sel; struct device *dev; char *params_str; - exit_code_t rc; + exit_code_t rc = EXIT_OK; struct strlist_node *s; struct devtype *dt; + struct select_opts *select; - debug("Checking for modified root device configuration\n"); + debug("Checking for required initial RAM-disk update\n"); - /* Get list of devices that provide the root device. */ + /* Get list of devices that provide the root device or require + * early configuration. */ selected = selected_dev_list_new(); - rc = select_by_path(NULL, selected, config_active, scope_mandatory, - NULL, NULL, PATH_ROOT, err_ignore); - if (rc) { + /* First add devices that had zdev:early removed or changed to 0. + * The subsequent call to select_devices() will filter out any + * duplicates. */ + add_early_removed(selected); + /* Now add devices required for root file system. */ + if (select_by_path(NULL, selected, config_active, scope_mandatory, + NULL, NULL, PATH_ROOT, err_ignore)) { /* Running from an unknown root device is not an error. */ verb("Note: Could not determine if root device configuration " "needs to be updated\n"); - rc = 0; - goto out; } + /* Finally add devices with zdev:early=1. */ + select = select_opts_new(); + strlist_add(&select->by_attr, "%s=1", INTERNAL_ATTR_EARLY); + select_devices(select, selected, 1, 0, 0, + config_active | config_persistent, scope_mandatory, + err_ignore); + select_opts_free(select); /* Determine if any of the devices or device types has been modified. */ mod = strlist_new(); @@ -68,19 +117,18 @@ exit_code_t root_check(void) if (util_list_is_empty(mod)) goto out; - info("Note: Some of the changes affect devices providing the root " - "file system:\n"); + info("Note: The initial RAM-disk must be updated for these changes to take effect:\n"); util_list_iterate(mod, s) info(" - %s\n", s->str); - info(" Additional steps such as rebuilding the RAM-disk might be " - "required.\n"); /* Check if script is available. */ - if (!util_path_is_reg_file(PATH_ROOT_SCRIPT)) + if (!util_path_is_reg_file(PATH_ROOT_SCRIPT)) { + warn("A manual update of the initial RAM-disk is required.\n"); goto out; + } /* Ask for confirmation. */ - if (!confirm("Update persistent root device configuration now?")) { + if (!confirm("Update initial RAM-disk now?")) { rc = EXIT_ABORTED; goto out; } @@ -97,7 +145,7 @@ exit_code_t root_check(void) /* Run update command. */ if (misc_system(err_delayed_print, "%s %s", PATH_ROOT_SCRIPT, params_str) != 0) { - error("Failure while updating root device configuration\n"); + error("Failure while updating initial RAM-disk\n"); delayed_print(DELAY_INDENT); rc = EXIT_RUNTIME_ERROR; } --- a/zdev/src/zfcp_host.c +++ b/zdev/src/zfcp_host.c @@ -17,6 +17,7 @@ #include "ccw.h" #include "device.h" #include "devtype.h" +#include "internal.h" #include "misc.h" #include "path.h" #include "setting.h" @@ -247,6 +248,7 @@ struct subtype zfcp_host_subtype = { &zfcp_host_attr_failed, &zfcp_host_attr_port_remove, &zfcp_host_attr_port_rescan, + &internal_attr_early, ), .unknown_dev_attribs = 1, --- a/zdev/src/zfcp_lun.c +++ b/zdev/src/zfcp_lun.c @@ -21,6 +21,7 @@ #include "devnode.h" #include "devtype.h" #include "misc.h" +#include "internal.h" #include "namespace.h" #include "path.h" #include "scsi.h" @@ -1097,6 +1098,7 @@ struct subtype zfcp_lun_subtype = { &zfcp_lun_attr_scsi_timeout, &zfcp_lun_attr_scsi_state, &zfcp_lun_attr_scsi_delete, + &internal_attr_early, ), .prefixes = STRING_ARRAY(SCSI_ATTR_PREFIX), .unknown_dev_attribs = 1,
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
