File postfix.changes of Package postfix

Overview Repositories Revisions Requests Users Attributes Meta

File postfix.changes of Package postfix (Revision b3991f7e70c5fc1afae8f02d4aad256c)

Currently displaying revision b3991f7e70c5fc1afae8f02d4aad256c , Show latest

-------------------------------------------------------------------
Tue Apr  2 08:40:42 UTC 2019 - Peter Varkoly <varkoly@suse.com>

- bsc#1120757 L3: File Permissions->Paranoid can cause a system hang
  Break loop if postfix has no permission in spool directory.
  - add postfix-avoid-infinit-loop-if-no-permission.patch

-------------------------------------------------------------------
Sun Jan 20 08:41:58 UTC 2019 - Peter Varkoly <varkoly@suse.com>

- bsc#1120110 L3: Running postfix set-permissions gives error
  that is cannot access postfix-ldap.so
  o Adapt the proposed patch in postfix-files in postfix-SUSE.tar.gz

-------------------------------------------------------------------
Fri May 25 11:19:22 UTC 2018 - varkoly@suse.com

- bsc#1087471 Unreleased Postfix update breaks SUSE Manager
  o Removing setting smtpd_sasl_path and smtpd_sasl_type to empty

-------------------------------------------------------------------
Mon May 21 16:31:57 UTC 2018 - michael@stroeder.com

- Update to 3.3.1 (bsc#1094965)
  * Postfix did not support running as a PID=1 process, which
    complicated Postfix deployment in containers. The "postfix
    start-fg" command will now run the Postfix master daemon as a
    PID=1 process if possible. Thanks for inputs from Andreas
    Schulze, Eray Aslan, and Viktor Dukhovni.
  * Segfault in the postconf(1) command after it could not open a
    Postfix database configuration file due to a file permission
    error (dereferencing a null pointer). Reported by Andreas
    Hasenack, fixed by Viktor Dukhovni.
  * The luser_relay feature became a black hole, when the luser_relay
    parameter was set to a non-existent local address (i.e. mail
    disappeared silently). Reported by J?rgen Thomsen.
  * Missing error propagation in the tlsproxy(8) daemon could result
    in a segfault after TLS handshake error (dereferencing a
    0xffff...ffff pointer). This daemon handles the TLS protocol
    when a non-whitelisted client sends a STARTTLS command to
    postscreen(8).

-------------------------------------------------------------------
Wed May  9 09:02:12 UTC 2018 - lnussel@suse.de

- remove pre-requirements on sysvinit(network) and sysvinit(syslog).
  There seems to be no good reason for that other than blowing up
  the dependencies (bsc#1092408).

-------------------------------------------------------------------
Mon Apr  9 09:32:56 UTC 2018 - adam.majer@suse.de

- bsc#1071807 postfix-SuSE/config.postfix: only reload postfix
  if the actual service is running. This prevents spurious
  and irrelevant error messages in system logs.

-------------------------------------------------------------------
Thu Mar 22 14:20:20 UTC 2018 - varkoly@suse.com

- bsc#1082514 autoyast: postfix gets not set myhostname properly -
  set to localhost

-------------------------------------------------------------------
Mon Mar 12 13:43:43 UTC 2018 - ilya@ilya.pp.ua

- Refresh spec-file via spec-cleaner and manual optinizations.
  * Add %license macro.
  * Set license to IPL-1.0 OR EPL-2.0.
- Update to 3.3.0
  * http://cdn.postfix.johnriley.me/mirrors/postfix-release/official/postfix-3.3.0.RELEASE_NOTES
  * Dual license: in addition to the historical IBM Public License
    1.0, Postfix is now also distributed with the more recent Eclipse
    Public License 2.0. Recipients can choose to take the software
    under the license of their choice. Those who are more comfortable
    with the IPL can continue with that license.
  * The postconf command now warns about unknown parameter names
    in a Postfix database configuration file. As with other unknown
    parameter names, these warnings can help to find typos early.
  * Container support: Postfix 3.3 will run in the foreground with
    "postfix start-fg". This requires that Postfix multi-instance
    support is disabled (the default). To collect Postfix syslog
    information on the container's host, mount the host's /dev/log
    socket into the container, for example with "docker run -v
    /dev/log:/dev/log ...other options...", and specify a distinct
    Postfix syslog_name setting in the container (for example with
    "postconf syslog_name=the-name-here").
  * Milter support: applications can now send RET and ENVID parameters
    in SMFIR_CHGFROM (change envelope sender) requests.
  * Postfix-generated From: headers with 'full name' information
    are now formatted as "From: name <address>" by default. Specify
    "header_from_format = obsolete" to get the earlier form "From:
    address (name)".
  * Interoperability: when Postfix IPv6 and IPv4 support are both
    enabled, the Postfix SMTP client will now relax MX preferences
    and attempt to schedule similar numbers of IPv4 and IPv6
    addresses. This works around mail delivery problems when a
    destination announces lots of primary MX addresses on IPv6, but
    is reachable only over IPv4 (or vice versa). The new behavior
    is controlled with the smtp_balance_mx_inet_protocols parameter.
  * Compatibility safety net: with compatibility_level < 1, the
    Postfix SMTP server now warns for mail that would be blocked
    by the Postfix 2.10 smtpd_relay_restrictions feature, without
    blocking that mail. There still is a steady trickle of sites
    that upgrade from an earlier Postfix version.

-------------------------------------------------------------------
Tue Feb 13 10:39:37 UTC 2018 - varkoly@suse.com

- bsc#1065411 Package postfix should require package system-user-nobody
- bsc#1080772 postfix smtpd throttle getting "hello" if no sasl auth
   was configured

-------------------------------------------------------------------
Thu Dec  7 15:02:14 UTC 2017 - dimstar@opensuse.org

- Fix usage of fillup_only:-y is not a valid option to this macro.

-------------------------------------------------------------------
Thu Nov 23 13:43:17 UTC 2017 - rbrown@suse.com

- Replace references to /var/adm/fillup-templates with new 
  %_fillupdir macro (boo#1069468)

-------------------------------------------------------------------
Wed Nov  8 13:32:28 CET 2017 - kukuk@suse.de

- Don't mark postfix.service as config file, this is no config
  file.
- Some of the Requires(pre) are needed for post-install and at
  runtime, fix the requires.

-------------------------------------------------------------------
Mon Oct 30 12:12:08 UTC 2017 - michael@stroeder.com

- update to 3.2.4
  * DANE interoperability. Postfix builds with OpenSSL 1.0.0 or
    1.0.1 failed to send email to some sites with "TLSA 2 X X" DNS
    records associated with an intermediate CA certificate. Problem
    report and initial fix by Erwan Legrand.
  * Missing dynamicmaps support in the Postfix sendmail command.
    This broke authorized_submit_users settings that use a
    dynamically-loaded map type. Problem reported by Ulrich Zehl.

-------------------------------------------------------------------
Fri Oct 20 12:27:12 UTC 2017 - varkoly@suse.com

- bnc#1059512 L3: Postfix Problem
  The applied changes breaks existing postfix configurations because
  daemon_directory was not adapted to the new value.

-------------------------------------------------------------------
Sun Oct 15 22:47:29 UTC 2017 - chris@computersalat.de

- fix build for SLE
  * nothing provides libnsl-devel
  * add bcond_with libnsl

-------------------------------------------------------------------
Wed Oct  4 10:58:28 UTC 2017 - varkoly@suse.com

- bnc#1059512 L3: Postfix Problem 
  To manage multiple Postfix instances on a single host requires
  that daemon_directory and shlib_directory is different to
  avoid use of the shared directories also as per-instance directories.
  For this reason daemon_directory was set to /usr/lib/postfix/bin/.
  shlib_directory stands /usr/lib/postfix/.

-------------------------------------------------------------------
Thu Sep 28 08:44:41 UTC 2017 - varkoly@suse.com

- bnc#1016491 postfix raported to log "warning: group or other writable:"
   on each symlink in config.
  * Add fix-postfix-script.patch

-------------------------------------------------------------------
Mon Sep 25 16:25:05 UTC 2017 - michael@stroeder.com

- update to 3.2.3
 * Extension propagation was broken with "recipient_delimiter = .".
   This change reverts a change that was trying to be too clever.
 * The postqueue command would abort with a panic message after it
   experienced an output write error while listing the mail queue.
   This change restores a write error check that was lost with the
   Postfix 3.2 rewrite of the vbuf_print formatter.
 * Restored sanity checks for dynamically-specified width and precision
   in format strings (%*, %.*, and %*.*). These checks were lost with
   the Postfix 3.2 rewrite of the vbuf_print formatter.

-------------------------------------------------------------------
Thu Aug 17 08:56:15 CEST 2017 - kukuk@suse.de

- Add libnsl-devel build requires for glibc obsoleting libnsl

-------------------------------------------------------------------
Thu Jul 27 10:31:01 UTC 2017 - varkoly@suse.com

- bnc#1045264 L3: postmap problem
   * Applying proposed patch of leen.meyer@ziggo.nl in bnc#771811

-------------------------------------------------------------------
Fri Jun 16 17:45:55 UTC 2017 - michael@stroeder.com

- update to 3.2.2
  * Security: Berkeley DB versions 2 and later try to read settings
    from a file DB_CONFIG in the current directory. This undocumented
    feature may introduce undisclosed vulnerabilities resulting in
    privilege escalation with Postfix set-gid programs (postdrop,
    postqueue) before they chdir to the Postfix queue directory,
    and with the postmap and postalias commands depending on whether
    the user's current directory is writable by other users. This
    fix does not change Postfix behavior for Berkeley DB versions
    < 3, but it does reduce postmap and postalias 'create' performance
    with Berkeley DB versions 3.0 .. 4.6.
  * The SMTP server receive_override_options were not restored at
    the end of an SMTP session, after the options were modified by
    an smtpd_milter_maps setting of "DISABLE". Milter support
    remained disabled for the life time of the smtpd process.
  * After the Postfix 3.2 address/domain table lookup overhaul, the
    check_sender_access and check_recipient_access features ignored
    a non-default parent_domain_matches_subdomains setting.

-------------------------------------------------------------------
Wed Apr 19 20:36:03 UTC 2017 - chris@computersalat.de

- revert changes of postfix-main.cf.patch from rev=261
  * config.postfix will not 'enable' (remove #) var, but place
    modified (enabled) var at end of file, far away from place
    where it should be
  * keep vars enabled but empty

-------------------------------------------------------------------
Thu Apr 13 09:18:45 UTC 2017 - werner@suse.de

- Some cleanups
  * Fix SUSE postfix-files to avoid chown errors (anyway this file
    seems to be obsolete) 
  * Avoid installing shared libraries twice
  * Refresh patch postfix-linux45.patch

-------------------------------------------------------------------
Sat Apr  8 15:06:14 UTC 2017 - chris@computersalat.de

- update postfix-master.cf.patch
  * recover lost (with 3.2.0 update) submission, smtps sections 
  * merge with upstream update
- update config.postfix
  * update master.cf generation for submission
- rebase patches against 3.2.0
  * pointer_to_literals.patch
  * postfix-no-md5.patch
  * postfix-ssl-release-buffers.patch
  * postfix-vda-v14-3.0.3.patch

-------------------------------------------------------------------
Mon Mar 20 18:01:36 CET 2017 - kukuk@suse.de

- Require system group mail
- Use mail group name instead of GID

-------------------------------------------------------------------
Mon Mar  6 21:27:38 UTC 2017 - mrueckert@suse.de

- update to 3.2.0
  - [Feature 20170128] Postfix 3.2 fixes the handling of address
    extensions with email addresses that contain spaces. For
    example, the virtual_alias_maps, canonical_maps, and
    smtp_generic_maps features now correctly propagate an address
    extension from "aa bb+ext"@example.com to "cc
    dd+ext"@other.example, instead of producing broken output.
  - [Feature 20161008] "PASS" and "STRIP" actions in
    header/body_checks.  "STRIP" is similar to "IGNORE" but also
    logs the action, and "PASS" disables header, body, and Milter
    inspection for the remainder of the message content.
    Contributed by Hobbit.
  - [Feature 20160330] The collate.pl script by Viktor Dukhovni for
    grouping Postfix logfile records into "sessions" based on queue
    ID and process ID information. It's in the auxiliary/collate
    directory of the Postfix source tree.
  - [Feature 20160527] Postfix 3.2 cidr tables support if/endif and
    negation (by prepending ! to a pattern), just like regexp and
    pcre tables.  The primarily purpose is to improve readability
    of complex tables. See the cidr_table(5) manpage for syntax
    details.
  - [Incompat 20160925] In the Postfix MySQL database client, the
    default option_group value has changed to "client", to enable
    reading of "client" option group settings in the MySQL options
    file. This fixes a "not found" problem with Postfix queries
    that contain UTF8-encoded non-ASCII text.  Specify an empty
    option_group value (option_group =) to get backwards-compatible
    behavior.
  - [Feature 20161217] Stored-procedure support for MySQL
    databases.  Contributed by John Fawcett. See mysql_table(5) for
    instructions.
  - [Feature 20170128] The postmap command, and the inline: and
    texthash: maps now support spaces in left-hand field of the
    lookup table "source text". Use double quotes (") around a
    left-hand field that contains spaces, and use backslash (\) to
    protect embedded quotes in a left-hand field. There is no
    change in the processing of the right-hand field.
  - [Feature 20160611] The Postfix SMTP server local IP address and
    port are available in the policy delegation protocol (attribute
    names: server_address, server_port), in the Milter protocol
    (macro names: {daemon_addr}, {daemon_port}), and in the XCLIENT
    protocol (attribute names: DESTADDR, DESTPORT).
  - [Feature 20161024] smtpd_milter_maps support for per-client
    Milter configuration that overrides smtpd_milters, and that has
    the same syntax. A lookup result of "DISABLE" turns off Milter
    support. See MILTER_README.html for details.
  - [Feature 20160611] The Postfix SMTP server local IP address and
    port are available in the policy delegation protocol (attribute
    names: server_address, server_port), in the Milter protocol
    (macro names: {daemon_addr}, {daemon_port}), and in the XCLIENT
    protocol (attribute names: DESTADDR, DESTPORT).
  - [Incompat 20170129] The postqueue command no longer forces all
    message arrival times to be reported in UTC. To get the old
    behavior, set TZ=UTC in main.cf:import_environment (this
    override is not recommended, as it affects all Postfix utities
    and daemons).
  - [Incompat 20161227] For safety reasons, the sendmail -C option
    must specify an authorized directory: the default configuration
    directory, a directory that is listed in the default main.cf
    file with alternate_config_directories or
    multi_instance_directories, or the command must be invoked with
    root privileges (UID 0 and EUID 0).  This mitigates a recurring
    problem with the PHP mail() function.
  - [Feature 20160625] The Postfix SMTP server now passes remote
    client and local server network address and port information to
    the Cyrus SASL library. Build with ``make makefiles
    "CCARGS=$CCARGS -DNO_IP_CYRUS_SASL_AUTH"'' for backwards
    compatibility.
  - [Feature 20161103] Postfix 3.2 disables the 'transitional'
    compatibility between the IDNA2003 and IDNA2008 standards for
    internationalized domain names (domain names beyond the limits
    of US-ASCII).

This change makes Postfix behavior consistent with contemporary
    web browsers. It affects the handling of some corner cases such
    as German sz and Greek zeta. See
    http://unicode.org/cldr/utility/idna.jsp for more examples.

Specify "enable_idna2003_compatibility = yes" to restore
    historical behavior (but keep in mind that the rest of the
    world may not make that same choice).
  - [Feature 20160828] Fixes for deprecated OpenSSL 1.1.0 API
    features, so that Postfix will build without depending on
    backwards-compatibility support.

[Incompat 20161204] Postfix 3.2 removes tentative features that
    were implemented before the DANE spec was finalized:

- Support for certificate usage PKIX-EE(1),

- The ability to disable digest agility (Postfix now behaves as
      if "tls_dane_digest_agility = on"), and

- The ability to disable support for "TLSA 2 [01] [12]" records
      that specify the digest of a trust anchor (Postfix now
      behaves as if "tls_dane_trust_anchor_digest_enable = yes).
  - [Feature 20161217] Postfix 3.2 enables elliptic curve
    negotiation with OpenSSL >= 1.0.2.  This changes the default
    smtpd_tls_eecdh_grade setting to "auto", and introduces a new
    parameter tls_eecdh_auto_curves with the names of curves that
    may be negotiated.

The default tls_eecdh_auto_curves setting is determined at
    compile time, and depends on the Postfix and OpenSSL versions.
    At runtime, Postfix will skip curve names that aren't supported
    by the OpenSSL library.
  - [Feature 20160611] The Postfix SMTP server local IP address and
    port are available in the policy delegation protocol (attribute
    names: server_address, server_port), in the Milter protocol
    (macro names: {daemon_addr}, {daemon_port}), and in the XCLIENT
    protocol (attribute names: DESTADDR, DESTPORT).
- refresh postfix-master.cf.patch

-------------------------------------------------------------------
Mon Mar  6 14:04:13 UTC 2017 - wr@rosenauer.org

- make sure that system users can be created in %pre

-------------------------------------------------------------------
Sat Feb 18 14:01:35 UTC 2017 - kukuk@suse.com

- Fix requires:
  - shadow is needed for postfix-mysql pre-install section
  - insserv is not needed if systemd is used

-------------------------------------------------------------------
Sat Jan 21 23:27:34 UTC 2017 - chris@computersalat.de

- update postfix-mysql
  * update  mysql_*.cf files
  * update postfix-mysql.sql (INNODB, utf8)
- update postfix-main.cf.patch
  * uncomment smtpd_sasl_path, smtpd_sasl_type
    can be changed via POSTFIX_SMTP_AUTH_SERVICE=(cyrus,dovecot)
  * add option for smtp_tls_policy_maps (commented)
- update postfix-master.cf.patch
  * fix indentation of submission, smtps options for correct
    enabling via config.postfix
- update config.postfix
  * fix sync of CA certificates
  * fix master.cf generation for submission, smtps
- rebase postfix-vda-v14-3.0.3.patch

-------------------------------------------------------------------
Wed Jan 11 14:07:35 UTC 2017 - varkoly@suse.com

- FATE#322322 Update postfix to version 3.X
  Merging changes with SLES12-SP2
  Removeved patches: add_missed_library.patch bnc#947707.diff dynamic_maps.patch postfix-db6.diff
    postfix-opensslconfig.patch bnc#947519.diff dynamic_maps_pie.patch
    postfix-post-install.patch
    These are included in the new version of postfix
- Remove references to SuSEconfig.postfix from sysconfig docs.
  (bsc#871575)
- bnc#947519 SuSEconfig.postfix should enforce umask 022
- bnc#947707 mail generated by Amavis being prevented from being re-adressed by /etc/postfix/virtual
- bnc#972346 /usr/sbin/SuSEconfig.postfix is wrong
- postfix-linux45.patch: handle Linux 4.x and Linux 5.x (used by aarch64)
  (bsc#940289)

-------------------------------------------------------------------
Tue Jan  3 12:20:18 UTC 2017 - varkoly@suse.com

- update to 3.1.4 
  * The postscreen daemon did not merge the client test status information
    for concurrent sessions from the same IP address.
  * The Postfix SMTP server falsely rejected a sender address when validating
    a sender address with "smtpd_reject_unlisted_recipient = yes" or with
    "reject_unlisted_sender". Cause: the address validation code did not query sender_canonical_maps.
  * The virtual delivery agent did not detect failure to skip to the end
    of a mailbox file, so that mail would be delivered to the beginning of the file.
    This could happen when a mailbox file was already larger than the virtual mailbox size limit.
  * The postsuper logged an incorrect rename operation count after creating a missing directory.
  * The Postfix SMTP server falsely rejected mail when a sender-dependent "error"
    transport was configured. Cause: the SMTP server address validation code
    was not updated when the sender_dependent_default_transport_maps feature
    was introduced.
  * The Postfix SMTP server falsely rejected an SMTPUTF8 sender address, when "smtpd_delay_reject = no".
  * The "postfix tls deploy-server-cert" command used the wrong certificate
    and key file. This was caused by a cut-and-paste error in the postfix-tls-script file.

-------------------------------------------------------------------
Sat Nov 26 15:43:57 UTC 2016 - chris@computersalat.de

- improve config.postfix
  * improve SASL stuff
  * add POSTFIX_SMTP_AUTH_SERVICE=(cyrus|dovecot)

-------------------------------------------------------------------
Mon Nov 14 21:53:18 UTC 2016 - chris@computersalat.de

- improve config.postfix
  * improve with MySQL stuff

-------------------------------------------------------------------
Mon Nov  7 13:35:38 UTC 2016 - chris@computersalat.de

- update vda patch to latest available
  * remove postfix-vda-v13-3.10.0.patch
  * add postfix-vda-v14-3.0.3.patch
- rebase patches (and to be p0)
  * pointer_to_literals.patch
  * postfix-main.cf.patch
  * postfix-master.cf.patch
  * postfix-no-md5.patch
  * postfix-ssl-release-buffers.patch
- add /etc/postfix/ssl as default DIR for SSL stuff
  * cacerts -> ../../ssl/certs/
  * certs/
- revert POSTFIX_SSL_PATH from '/etc/ssl' to '/etc/postfix/ssl'
- improve config.postfix
  * revert smtpd_tls_CApath to POSTFIX_SSL_PATH/cacerts which is a
    symlink to /etc/ssl/certs
    Without reverting, 'gen_CA' would create files which would then be on
    the previous defined 'sslpath(/etc/ssl)/certs' (smtpd_tls_CApath)
    Cert reqs would be placed in 'sslpath(/etc/ssl)/certs/postfixreq.pem'
    which is not a good idea.
  * mkchroot: sync '/etc/postfix/ssl' to chroot
  * improve PCONF for smtp{,d}_tls_{cert,key}_file, adding/removing from
    main.cf, show warning if enabled and file is missing

-------------------------------------------------------------------
Sun Oct  9 20:11:34 UTC 2016 - michael@stroeder.com

- update to 3.1.3:
  * The Postfix SMTP server did not reset a previous session's
    failed/total command counts before rejecting a client that
    exceeds request or concurrency rates. This resulted in incorrect
    failed/total command counts being logged at the end of the
    rejected session.
  * The unionmap multi-table interface did not propagate table
    lookup errors, resulting in false "user unknown" responses.
  * The documentation was updated with a workaround for false "not
    found" errors with MySQL map queries that contain UTF8-encoded
    text. The workaround is to specify "option_group = client" in
    Postfix MySQL configuration files. This will be the default
    setting with Postfix 3.2 and later.

-------------------------------------------------------------------
Sun Sep  4 15:33:27 UTC 2016 - michael@stroeder.com

- update to 3.1.2:
  * Changes to make Postfix build with OpenSSL 1.1.0.
  * The makedefs script ignored readme_directory=pathname overrides.
    Fix by Todd C. Olson.
  * The tls_session_ticket_cipher documentation says that the default
    cipher for TLS session tickets is aes-256-cbc, but the implemented
    default was aes-128-cbc. Note that TLS session ticket keys are
    rotated after 1/2 hour, to limit the impact of attacks on session
    ticket keys.

-------------------------------------------------------------------
Thu Jun  2 12:26:17 UTC 2016 - schwab@suse.de

- postfix-post-install.patch: remove empty patch

-------------------------------------------------------------------
Sun May 29 16:45:30 UTC 2016 - chris@computersalat.de

- fix Changelog cause of Factory decline

-------------------------------------------------------------------
Tue May 24 13:18:55 UTC 2016 - varkoly@suse.com

- Fix typo in config.postfix

-------------------------------------------------------------------
Tue May 24 04:29:41 UTC 2016 - varkoly@suse.com

- bnc#981097 config.postfix creates broken main.cf for tls client configuration 
- bnc#981099 /etc/sysconfig/postfix: POSTFIX_SMTP_TLS_CLIENT incomplete
- update to 3.1.1:
- The new address_verify_pending_request_limit
  parameter introduces a safety limit for the number of address
  verification probes in the active queue.  The default limit is 1/4
  of the active queue maximum size. The queue manager enforces the
  limit by tempfailing probe messages that exceed the limit. This
  design avoids dependencies on global counters that get out of sync
  after a process or system crash.
- Machine-readable, JSON-formatted queue listing with "postqueue -j"
  (no "mailq" equivalent). 
- The milter_macro_defaults feature provides an optional list of macro
  name=value pairs. These specify default values for Milter macros when
  no value is available from the SMTP session context.
- Support to enforce a destination-independent delay between email
  deliveries.  The following example inserts 20 seconds of delay
  between all deliveries with the SMTP transport, limiting the delivery
  rate to at most three messages per minute.
      smtp_transport_rate_delay = 20s  
- Historically, the default setting "postscreen_dnsbl_ttl = 1h" assumes
  that a "not found" result from a DNSBL server will be valid for one
  hour.  This may have been adequate five years ago when postscreen
  was first implemented, but nowadays, that one hour can result in
  missed opportunities to block new spambots. 
  To address this, postscreen now respects the TTL of DNSBL "not
  found" replies, as well as the TTL of DNSWL replies (both "found"
  and "not found").  The TTL for a "not found" reply is determined
  according to RFC 2308 (the TTL of an SOA record in the reply).

Support for DNSBL or DNSWL reply TTL values is controlled by two
  configuration parameters:

postscreen_dnsbl_min_ttl (default: 60 seconds).
  postscreen_dnsbl_max_ttl (default: $postscreen_dnsbl_ttl or 1 hour)

The postscreen_dnsbl_ttl parameter is now obsolete, and has become
  the default value for the new postscreen_dnsbl_max_ttl parameter.
- New "smtpd_client_auth_rate_limit" feature, to
  enforce an optional rate limit on AUTH commands per SMTP client IP
  address.  Similar to other smtpd_client_*_rate_limit features, this
  enforces a limit on the number of requests per $anvil_rate_time_unit.
- New SMTPD policy service attribute "policy_context",
  with a corresponding "smtpd_policy_service_policy_context" configuration
  parameter.  Originally, this was implemented to share the same SMTPD
  policy service endpoint among multiple check_policy_service clients.
- A new "postfix tls" command to quickly enable opportunistic TLS
  in the Postfix SMTP client or server, and to manage SMTP server keys
  and certificates, including certificate signing requests and 
  TLSA DNS records for DANE.

-------------------------------------------------------------------
Tue Apr 19 07:59:32 UTC 2016 - opensuse@dstoecker.de

- build with working support for SMTPUTF8

-------------------------------------------------------------------
Sun Mar 20 14:11:27 UTC 2016 - mrueckert@suse.de

- fix build on sle11 by pointing _libexecdir to /usr/lib all the
  time.

-------------------------------------------------------------------
Sun Mar 20 13:46:56 UTC 2016 - mrueckert@suse.de

- some distros did not pull pkgconfig indirectly. pull it directly.

-------------------------------------------------------------------
Sun Mar 20 08:19:23 UTC 2016 - mrueckert@suse.de

- fix building the dynamic maps: the old build had postgresql e.g.
  with missing symbols.
  - convert to AUXLIBS_* instead of plain AUXLIBS which is needed
    for proper dynamic maps.
  - reordered the CCARGS and AUXLIBS* lines to group by feature
  - use pkgconfig or *_config tools where possible
- picked up signed char from fedora spec file
- enable lmdb support: new BR lmdb-devel, new subpackage
  postfix-lmdb.
- don't delete vmail user/groups

-------------------------------------------------------------------
Wed Mar  9 13:06:35 UTC 2016 - varkoly@suse.com

- update to 3.1.0
- Since version 3.0 postfix supports dynamic loading of cdb:, ldap:, 
  lmdb:, mysql:, pcre:, pgsql:, sdbm:, and sqlite: database clients.
  Thats why the patches dynamic_maps.patch and dynamic_maps_pie.patch
  could be removed.
- Adapting all the patches to postfix 3.1.0
- remove obsolete patches
  * add_missed_library.patch
  * postfix-opensslconfig.patch
- update vda patch
  * remove postfix-vda-v13-2.10.0.patch
  * add postfix-vda-v13-3.10.0.patch
- The patch postfix-db6.diff is not more neccessary

- Backwards-compatibility safety net.
  With NEW Postfix installs, you MUST install a main.cf file with
  the setting "compatibility_level = 2". See conf/main.cf for an
  example.
  
  With UPGRADES of existing Postfix systems, you MUST NOT change the
  main.cf compatibility_level setting, nor add this setting if it
  does not exist.
  
  Several Postfix default settings have changed with Postfix 3.0.  To
  avoid massive frustration with existing Postfix installations,
  Postfix 3.0 comes with a safety net that forces Postfix to keep
  running with backwards-compatible main.cf and master.cf default
  settings. This safety net depends on the main.cf compatibility_level
  setting (default: 0). Details are in COMPATIBILITY_README.

- Major changes - tls
* [Feature 20160207] A new "postfix tls" command to quickly enable
  opportunistic TLS in the Postfix SMTP client or server, and to
  manage SMTP server keys and certificates, including certificate
  signing requests and TLSA DNS records for DANE.
* As of the middle of 2015, all supported Postfix releases no longer
  nable "export" grade ciphers for opportunistic TLS, and no longer
  use the deprecated SSLv2 and SSLv3 protocols for mandatory or
  opportunistic TLS.
* [Incompat 20150719] The default Diffie-Hellman non-export prime was
  updated from 1024 to 2048 bits, because SMTP clients are starting
  to reject TLS handshakes with primes smaller than 2048 bits.
* [Feature 20160103] The Postfix SMTP client by default enables DANE
  policies when an MX host has a (DNSSEC) secure TLSA DNS record,
  even if the MX DNS record was obtained with insecure lookups.  The
  existence of a secure TLSA record implies that the host wants to
  talk TLS and not plaintext. For details see the
  smtp_tls_dane_insecure_mx_policy configuration parameter.

- Major changes - default settings
  [Incompat 20141009] The default settings have changed for relay_domains
  (new: empty, old: $mydestination) and mynetworks_style (new: host,
  old: subnet).  However the backwards-compatibility safety net will
  prevent these changes from taking effect, giving the system
  administrator the option to make an old default setting permanent
  in main.cf or to adopt the new default setting, before turning off
  backwards compatibility. See COMPATIBILITY_README for details.
  
  [Incompat 20141001] A new backwards-compatibility safety net forces
  Postfix to run with backwards-compatible main.cf and master.cf
  default settings after an upgrade to a newer but incompatible Postfix
  version. See COMPATIBILITY_README for details.
  
  While the backwards-compatible default settings are in effect,
  Postfix logs what services or what email would be affected by the
  incompatible change. Based on this the administrator can make some
  backwards-compatibility settings permanent in main.cf or master.cf,
  before turning off backwards compatibility.

- Major changes - address verification safety
  [Feature 20151227] The new address_verify_pending_request_limit
  parameter introduces a safety limit for the number of address
  verification probes in the active queue.  The default limit is 1/4
  of the active queue maximum size. The queue manager enforces the
  limit by tempfailing probe messages that exceed the limit. This
  design avoids dependencies on global counters that get out of sync
  after a process or system crash.
  
  Tempfailing verify requests is not as bad as one might think.  The
  Postfix verify cache proactively updates active addresses weeks
  before they expire. The address_verify_pending_request_limit affects
  only unknown addresses, and inactive addresses that have expired
  from the address verify cache (by default, after 31 days).
  
- Major changes - json support
  [Feature 20151129] Machine-readable, JSON-formatted queue listing
  with "postqueue -j" (no "mailq" equivalent).  The output is a stream
  of JSON objects, one per queue file.  To simplify parsing, each
  JSON object is formatted as one text line followed by one newline
  character. See the postqueue(1) manpage for a detailed description
  of the output format.
  
- Major changes - milter support
  [Feature 20150523] The milter_macro_defaults feature provides an
  optional list of macro name=value pairs. These specify default
  values for Milter macros when no value is available from the SMTP
  session context.
  
  For example, with "milter_macro_defaults = auth_type=TLS", the
  Postfix SMTP server will send an auth_type of "TLS" to a Milter,
  unless the remote client authenticates with SASL.
  
  This feature was originally implemented for a submission service
  that may authenticate clients with a TLS certificate, without having
  to make changes to the code that implements TLS support.
  
- Major changes - output rate control
  
  [Feature 20150710] Destination-independent delivery rate delay
  
  Support to enforce a destination-independent delay between email
  deliveries.  The following example inserts 20 seconds of delay
  between all deliveries with the SMTP transport, limiting the delivery
  rate to at most three messages per minute.
  
  /etc/postfix/main.cf:
      smtp_transport_rate_delay = 20s
  
  For details, see the description of default_transport_rate_delay
  and transport_transport_rate_delay in the postconf(5) manpage.
  
- Major changes - postscreen dnsbl
  [Feature 20150710] postscreen support for the TTL of DNSBL and DNSWL
  lookup results
  
  Historically, the default setting "postscreen_dnsbl_ttl = 1h" assumes
  that a "not found" result from a DNSBL server will be valid for one
  hour.  This may have been adequate five years ago when postscreen
  was first implemented, but nowadays, that one hour can result in
  missed opportunities to block new spambots.
  
  To address this, postscreen now respects the TTL of DNSBL "not
  found" replies, as well as the TTL of DNSWL replies (both "found"
  and "not found").  The TTL for a "not found" reply is determined
  according to RFC 2308 (the TTL of an SOA record in the reply).
  
  Support for DNSBL or DNSWL reply TTL values is controlled by two
  configuration parameters:
  
  postscreen_dnsbl_min_ttl (default: 60 seconds).
  
      This parameter specifies a minimum for the amount of time that
      a DNSBL or DNSWL result will be cached in the postscreen_cache_map.
      This prevents an excessive number of postscreen cache updates
      when a DNSBL or DNSWL server specifies a very small reply TTL.
  
  postscreen_dnsbl_max_ttl (default: $postscreen_dnsbl_ttl or 1 hour)
  
      This parameter specifies a maximum for the amount of time that
      a DNSBL or DNSWL result will be cached in the postscreen_cache_map.
      This prevents cache pollution when a DNSBL or DNSWL server
      specifies a very large reply TTL.
  
  The postscreen_dnsbl_ttl parameter is now obsolete, and has become
  the default value for the new postscreen_dnsbl_max_ttl parameter.
  
- Major changes - sasl auth safety
  [Feature 20151031] New "smtpd_client_auth_rate_limit" feature, to
  enforce an optional rate limit on AUTH commands per SMTP client IP
  address.  Similar to other smtpd_client_*_rate_limit features, this
  enforces a limit on the number of requests per $anvil_rate_time_unit.
  
- Major changes - smtpd policy
  [Feature 20150913] New SMTPD policy service attribute "policy_context",
  with a corresponding "smtpd_policy_service_policy_context" configuration
  parameter.  Originally, this was implemented to share the same SMTPD
  policy service endpoint among multiple check_policy_service clients.

-------------------------------------------------------------------
Wed Dec  9 14:05:22 UTC 2015 - varkoly@suse.com

- bnc#958329 postfix fails to start when openslp is not installed

-------------------------------------------------------------------
Mon Oct 12 20:49:27 UTC 2015 - michael@stroeder.com

- upstream update postfix 2.11.7:
  * The Postfix Milter client aborted with a panic while adding a
    message header, after adding a short message header with the
    header_checks PREPEND action. Fixed by invoking the header
    output function while PREPENDing a message header.
  * False alarms while scanning the Postfix queue. Fixed by resetting
    errno before calling readdir(). This defect was introduced
    19970309.
  * The postmulti command produced an incorrect error message.
  * The postmulti command now refuses to create a new MTA instance
    when the template main.cf or master.cf file are missing. This
    is a common problem on Debian-like systems.
  * Turning on Postfix SMTP server HAProxy support broke TLS
    wrappermode. Fixed by temporarily using a 1-byte VSTREAM buffer
    to read the HAProxy connection hand-off information.
  * The xtext_unquote() function did not propagate error reports
    from xtext_unquote_append(), causing the decoder to return
    partial output, instead of rejecting malformed input. The Postfix
    SMTP server uses this function to parse input for the ENVID and
    ORCPT parameters, and for XFORWARD and XCLIENT command parameters.

-------------------------------------------------------------------
Wed Aug 12 10:51:51 UTC 2015 - jkeil@suse.de

- boo#934060: Remove quirky hostname logic from config.postfix
  * /etc/hostname doesn't contain anything useful
  * linux.local is no good either
  * postfix will use `hostname`.localdomain as fallback

-------------------------------------------------------------------
Tue Aug  4 09:09:04 UTC 2015 - meissner@suse.com

- postfix-no-md5.patch: replace fingerprint defaults by sha1. bsc#928885

-------------------------------------------------------------------
Tue Aug  4 09:07:25 UTC 2015 - meissner@suse.com

- %verifyscript is a new section, move it out of the %ifdef
  so the fillups are run afterwards.

-------------------------------------------------------------------
Wed Jul 22 16:44:44 UTC 2015 - michael@stroeder.com

- upstream update postfix 2.11.6:
  Default settings have been updated so that they no longer enable
  export-grade ciphers, and no longer enable the SSLv2 and SSLv3
  protocols.
- removed postfix-2.11.5_linux4.patch because it's obsolete
- Bugfix (introduced: Postfix 2.11): with connection caching
  enabled (the default), recipients could be given to the wrong
  mail server. (bsc#944722)

-------------------------------------------------------------------
Mon Jun  1 22:25:51 UTC 2015 - crrodriguez@opensuse.org

- postfix-SuSE.tar.gz/postfix.service: None of
  nss-lookup.target network.target local-fs.target time-sync.target
  should be Wanted or Required except by the services
  the implement the relevant functionality i.e network.target
  is wanted/required by networkmanager, wicked, 
  systemd-network. other software must be ordered After them,
  see systemd.special(7)

-------------------------------------------------------------------
Sun May 17 18:41:52 UTC 2015 - mpluskal@suse.com

- Fix library symlink generation (boo#928662)

-------------------------------------------------------------------
Tue Apr 21 09:55:44 UTC 2015 - mrueckert@suse.de

- added postfix-2.11.5_linux4.patch:
  Allow building on kernel 4. Patch taken from:
  https://groups.google.com/forum/#!topic/mailing.postfix.users/fufS22sMGWY

-------------------------------------------------------------------
Sun Apr 19 23:03:25 UTC 2015 - mrueckert@suse.de

- update to postfix 2.11.5
  - Bugfix (introduced: Postfix 2.6):
    sender_dependent_relayhost_maps ignored the relayhost setting
    in the case of a DUNNO lookup result.  It would use the
    recipient domain instead.  Viktor Dukhovni. Wietse took the
    pieces of code that enforce the precedence of a
    sender-dependent relayhost, the global relayhost, and the
    recipient domain, and put that code together in once place so
    that it is easier to maintain.  File:
    trivial-rewrite/resolve.c.
  - Bitrot: prepare for future changes in OpenSSL API. Viktor
    Dukhovni. File: tls_dane.c.
  - Incompatibility: specifying "make makefiles" with "CC=command"
    will no longer override the default WARN setting.

-------------------------------------------------------------------
Mon Feb  9 18:01:38 UTC 2015 - michael@stroeder.com

- upstream update postfix 2.11.4:

Postfix 2.11.4 only:

* Fix a core dump when smtp_policy_maps specifies an invalid TLS
  level.

* Fix a missing " in \%s\", in postconf(1) fatal error messages,
  which violated the C language spec. Reported by Iain Hibbert.

All supported releases:

* Stop excessive recursion in the cleanup server while recovering
  from a virtual alias expansion loop. Problem found at Two Sigma.

* Stop exponential memory allocation with virtual alias expansion
  loops. This came to light after fixing the previous problem.

-------------------------------------------------------------------
Sun Feb  8 13:08:36 UTC 2015 - varkoly@suse.com

- correct pf_daemon_directory in spec. This must be /usr/lib/

-------------------------------------------------------------------
Thu Jan 22 09:36:09 UTC 2015 - varkoly@suse.com

- bnc#914086 syntax error in config.postfix
- Adapt config.postfix to be able to run on SLE11 too.

-------------------------------------------------------------------
Mon Jan 19 22:15:30 UTC 2015 - mpluskal@suse.com

- Don't install sysvinit script when systemd is used
- Make explicit PreReq dependencies conditional only for older 
  systems
- Don't try to set explicit attributes to symlinks
- Cleanup spec file vith spec-cleaner

-------------------------------------------------------------------
Tue Jan 13 07:04:52 UTC 2015 - varkoly@suse.com

- bnc#912594 config.postfix creates config based on old options

-------------------------------------------------------------------
Tue Jan  6 14:26:51 UTC 2015 - varkoly@suse.com

- bnc#911806 config.postfix does not set up correct saslauthd socket directory for chroot
- bnc#910265 config.postfix does not upgrade the chroot
- bnc#908003 wrong access rights on /usr/sbin/postdrop causes
   permission denied when trying to send a mail as non root user
- bnc#729154 wrong permissions for some postfix components

-------------------------------------------------------------------
Fri Nov 21 14:49:19 UTC 2014 - tchvatal@suse.com

- Remove keyring and things as it is md5 based one no longer
  accepted by gpg 2.1

-------------------------------------------------------------------
Fri Nov 14 09:19:00 UTC 2014 - dimstar@opensuse.org

- No longer perform gpg validation; osc source_validator does it
  implicit:
  + Drop gpg-offline BuildRequires.
  + No longer execute gpg_verify.

-------------------------------------------------------------------
Mon Oct 27 18:22:02 UTC 2014 - dmueller@suse.com

- restore previously lost fix:
  Fri Oct 11 13:32:32 UTC 2013 - matz@suse.de
  - Ignore errors in %pre/%post.

-------------------------------------------------------------------
Mon Oct 20 07:52:39 UTC 2014 - michael@stroeder.com

- postfix 2.11.3:

* Fix for configurations that prepend message headers with Postfix
    access maps, policy servers or Milter applications. Postfix now
    hides its own Received: header from Milters and exposes prepended
    headers to Milters, regardless of the mechanism used to prepend
    a header. This fix reverts a partial solution that was released
    on October 13, 2014, and replaces it with a complete solution.
  * Portability fix for MacOS X 10.7.x (Darwin 11.x) build procedure.

- postfix 2.11.2:

* Fix for DMARC implementations based on SPF policy plus DKIM
    Milter. The PREPEND access/policy action added headers ABOVE
    Postfix's own Received: header, exposing Postfix's own Received:
    header to Milters (protocol violation) and hiding the PREPENDed
    header from Milters. PREPENDed headers are now added BELOW
    Postfix's own Received: header and remain visible to Milters.
  * The Postfix SMTP server logged an incorrect client name in
    reject messages for check_reverse_client_hostname_access and
    check_reverse_client_hostname_{mx,ns}_access. They replied with
    the verified client name, instead of the name that was rejected.
  * The qmqpd daemon crashed with null pointer bug when logging a
    lost connection while not in a mail transaction.

-------------------------------------------------------------------
Sun Sep 14 16:50:57 UTC 2014 - andreas.stieger@gmx.de

- switch from md5 based signature to one using the SHA-512 digest
  algorithm supplied by maintainer on ML to pass source_validator

-------------------------------------------------------------------
Sat Sep 13 21:44:41 UTC 2014 - andreas.stieger@gmx.de

- postfix 2.11.1:
  * With connection caching enabled (the default), recipients could
    be given to the wrong mail server.
  * Enforce TLS when TLSA records exist, but all are unusable.
  * Don't leak memory when TLSA records exist, but all are unusable.
  * Prepend "-I. -I../../include" to the compiler command-line
    options, to avoid name clashes with non-Postfix header files. 
  * documentation fixes
  * logging fixes

-------------------------------------------------------------------
Fri Aug 29 15:40:00 UTC 2014 - rusjako@rus.uni-stuttgart.de

- fix dynamic_maps patch to enable memcache support, which does not
  need any libraries
  
-------------------------------------------------------------------
Thu Jul 31 12:44:59 UTC 2014 - dimstar@opensuse.org

- Rename rpmlintrc to %{name}-rpmlintrc.
  Follow the packaging guidelines.

-------------------------------------------------------------------
Fri Jun 27 23:16:21 UTC 2014 - chris@computersalat.de

- fix typo in postfix-SuSE/update_chroot.systemd
- fix config.postfix
  * 'insserv amavis' -> 'chkconfig amavis on'
- rework main.cf patch
  * fix virtual stuff
  * add some dovecot stuff
- rework master.cf patch
  * add some dovecot stuff

-------------------------------------------------------------------
Mon Jun 23 21:41:23 UTC 2014 - jamesp@vicidial.com

- The included postfix-mysql.tar.bz2 was using a MySQL 4.1 style of
  table engine specification. Modified so that the sql uses
  'ENGINE=' instead of 'TYPE=' for creating tables.

-------------------------------------------------------------------
Mon Jun 23 15:17:52 UTC 2014 - varkoly@suse.com

- bnc#816769 - config.postfix issues warnings about missing master.cf

-------------------------------------------------------------------
Tue Jun 10 13:34:03 UTC 2014 - varkoly@suse.com

- bnc#882033 - Package postfix has changed files according to rpm
- bnc#855688 - possible systemd bug: postfix & cifs dependency confict

-------------------------------------------------------------------
Mon Jun  9 12:17:35 UTC 2014 - varkoly@suse.com

- bnc#863350 - SuSEconfig.postfix complains about modified /etc/postfix/main.cf after updating postfix

-------------------------------------------------------------------
Mon May 26 17:21:54 UTC 2014 - chris@computersalat.de

- replace vda patch:
  * add postfix-vda-v13-2.10.0.patch
  * remove postfix-vda-v11-2.9.6.patch
- rebase patches
- config.postfix
  * add master.cf support for submission (587)
  * rework master.cf support for smtps

-------------------------------------------------------------------
Wed Feb 12 15:10:27 UTC 2014 - varkoly@suse.com

- bnc#862662 - Unable to configure postfix SMTP with forced TLS using YaST2

- Update to 2.11.0
  * TLS
    o Support for PKI-less TLS server certificate verification, where 
      the CA public key or the server certificate is identified via DNSSEC lookup
  * LMDB database support
  * master
    o The master_service_disable parameter value syntax has changed:
      use "service/type" instead of "service.type".
  * postconf:
    o Support for advanced master.cf query and update operations.
      This was implemented primarily to support automated system management tools.
    o The postconf command produces more warnings
  * relay safety
    New smtpd_relay_restrictions parameter built-in default settings:
    smtpd_relay_restrictions = 
	permit_mynetworks 
	permit_sasl_authenticated 
	defer_unauth_destination
  * postscreen whitelisting
    Allow a remote SMTP client to skip postscreen(8) tests based on
    its postscreen_dnsbl_sites score.

-------------------------------------------------------------------
Fri Oct 11 13:32:32 UTC 2013 - matz@suse.de

- Ignore errors in %pre/%post.

-------------------------------------------------------------------
Thu Oct  3 02:47:54 UTC 2013 - crrodriguez@opensuse.org

- two improvements for 13.1 and factory
* postfix-opensslconfig.patch call openSSL_config 
  so postfix respects the system's openssl configuration
* postfix-SuSE/postfix.service since a few months there
  is no mail-transfer-agent.target, units must be ordered
  after a list of smtpd implementations instead.

-------------------------------------------------------------------
Fri Sep 20 04:48:08 UTC 2013 - varkoly@suse.com

- Proc is not needed in chroot anymore

-------------------------------------------------------------------
Tue Jul 30 14:34:01 UTC 2013 - schwab@suse.de

- postfix-main.cf.patch: remove duplicate entry for inet_protocols

-------------------------------------------------------------------
Mon Jun 17 10:50:08 UTC 2013 - chris@computersalat.de

- fix for warning
  * unused parameter: virtual_create_maildirsize=yes
  * unused parameter: virtual_mailbox_extended=yes
  * rework main.cf.patch
- fix rcpostfix for sysvinit systems
  * /etc/postfix/system/update_postmaps: No such file or directory
- rebase patches
  * vda-v11-2.9.5 -> vda-v11-2.9.6
- fix file postfix-SuSE.tar.gz
  * made a tar.gz

-------------------------------------------------------------------
Sun Jun 16 02:12:07 UTC 2013 - jengelh@inai.de

- postfix.spec forces the use of SSL and SASL libraries,
  so make sure the BuildRequires are there

-------------------------------------------------------------------
Fri Jun 14 01:33:52 UTC 2013 - jengelh@inai.de

- Add postfix-db6.diff to fix compile abort with libdb-6.0

-------------------------------------------------------------------
Mon Apr 22 11:51:37 UTC 2013 - idonmez@suse.com

- Add Source URL, see https://en.opensuse.org/SourceUrls
- Add GPG verification

-------------------------------------------------------------------
Sat Apr 20 05:46:00 UTC 2013 - crrodriguez@opensuse.org

-  postfix-SuSE/postfix.service do not Require or 
   order after syslog.target as it no longer exists
   postfix will fail to start in the next systemd version.

-------------------------------------------------------------------
Sat Feb 23 09:33:08 UTC 2013 - rmilasan@suse.com

- Install postfix.service accordingly (/usr/lib/systemd for 12.3
  and up or /lib/systemd for older versions).

-------------------------------------------------------------------
Wed Feb  6 19:56:57 UTC 2013 - varkoly@suse.com

- update to 2,9.6 
  Bugfix: the local(8) delivery agent dereferenced a null pointer
   while delivering to null command (for example, "|" in a .forward file).
  Bugfix: memory leak in program initialization. tls/tls_misc.c.
  Bugfix: he undocumented OpenSSL X509_pubkey_digest() function is 
   unsuitable for computing certificate PUBLIC KEY fingerprints. 
   Postfix now provides a correct procedure that accounts for
   the algorithm and parameters in addition to the key data.  Specify 
   "tls_legacy_public_key_fingerprints = yes" if you need backwards compatibility.

-------------------------------------------------------------------
Thu Jan 17 22:01:16 UTC 2013 - varkoly@suse.com

- bnc#796162 - script to assign path elements not working in postfix install Build-0284(iso)

-------------------------------------------------------------------
Thu Jan 10 18:23:56 UTC 2013 - chris@computersalat.de

- rebase patches
  * vda-v10-2.8.12 -> vda-v11-2.9.5 (and to be a p0)
  * main, master, post-instal, ssl-release-buffers (remove version)
  * dynamic_maps, dynamic_maps_pie, pointer_to_literals

-------------------------------------------------------------------
Thu Jan 10 14:45:59 UTC 2013 - varkoly@suse.com

- update to 2,9.5
  * tls support:
     Support to turn off the TLSv1.1 and TLSv1.2 protocols:
     To temporarily turn off problematic protocols globally:
     /etc/postfix/main.cf:
       smtp_tls_protocols = !SSLv2, !TLSv1.1, !TLSv1.2
       smtp_tls_mandatory_protocols = !SSLv2, !TLSv1.1, !TLSv1.2
     However, it may be better to temporarily turn off problematic
     protocols for broken sites only:
     /etc/postfix/main.cf:
       smtp_tls_policy_maps = hash:/etc/postfix/tls_policy
     /etc/postfix/tls_policy:
       example.com         may protocols=!SSLv2:!TLSv1.1:!TLSv1.2
  * 20111012 To simplify integration with third-party
     applications, the Postfix sendmail command now always transforms
     all input lines ending in <CR><LF> into UNIX format (lines ending
     in <LF>). Specify "sendmail_fix_line_endings = strict" to restore
     historical Postfix behavior (i.e. convert all input lines ending
     in <CR><LF> only if the first line ends in <CR><LF>).
  * 20120114 Logfile-based alerting systems may need to be
     updated to look for "error" messages in addition to "fatal" messages.
     Specify "daemon_table_open_error_is_fatal = yes" to get the historical
     behavior (immediate termination with "fatal" message).
  * enable_long_queue_ids Postfix 2.9 introduces support for non-repeating queue IDs (also
     used as queue file names). These names are encoded in a mix of upper
     case, lower case and decimal digit characters.  Long queue IDs are
     disabled by default to avoid breaking tools that parse logfiles and
     that expect queue IDs with the smaller [A-F0-9] character set.
  * 20111209 memcache lookup and update support. This provides
     a way to share postscreen(8) or verify(8) caches between Postfix
     instances.  See MEMCACHE_README and memcache_table(5) for details
     and limitations.
  * 20111218 To support external SASL authentication, e.g.,
     in an NGINX proxy daemon, the Postfix SMTP server now always checks
     the smtpd_sender_login_maps table, even without having
     "smtpd_sasl_auth_enable = yes" in main.cf.
  * ipv6
    o The default inet_protocols value is now "all" instead of "ipv4",
      meaning use both IPv4 and IPv6.
    o The default smtp_address_preference value is now "any" instead
      of "ipv6", meaning choose randomly between IPv6 and IPv4. With
      this the Postfix SMTP client will have more success delivering
      mail to sites that have problematic IPv6 configurations.

-------------------------------------------------------------------
Sat Dec 15 16:33:24 UTC 2012 - chris@computersalat.de

- update to 2.8.13
  * 20121029
      Workaround: strip datalink suffix from IPv6 addresses
      returned by the system getaddrinfo() routine.  Such suffixes
      mess up the default mynetworks value, host name/address
      verification and possibly more. This change obsoletes the
      20101108 change that removes datalink suffixes in the SMTP
      and QMQP servers, but we leave that code alone.  File:
      util/myaddrinfo.c.
  * 20121013
      Cleanup: to compute the LDAP connection cache lookup key,
      join the numeric fields with null, just like string fields.
      Viktor Dukhovni. File: global/dict_ldap.c.
  * 20121010
      Bugfix (introduced: Postfix 2.5): memory leak in program
      initialization. Reported by Coverity. File: tls/tls_misc.c.
      Bugfix (introduced: Postfix 2.3): memory leak in the unused
      oqmgr program. Reported by Coverity. File: oqmgr/qmgr_message.c.
  * 20121003
      Bugfix: the postscreen_access_list feature was case-sensitive
      in the first character of permit, reject, etc. Reported by
      Feancis Picabia. File: global/server_acl.c.
- rebase dynamic_maps_pie patch 
- rpmlint
  * invalid-suse-version-check 1140
  * obsolete-suse-version-check 920 (changes file)

-------------------------------------------------------------------
Fri Dec 14 06:03:42 UTC 2012 - varkoly@suse.com

- bnc#790141 - Command SuSEconfig.postfix reports ERROR - 
  "can not find /lib/YaST/SuSEconfig.functions!!"

-------------------------------------------------------------------
Thu Nov  8 11:33:33 UTC 2012 - varkoly@suse.com

- bnc#782048 - postfix uses /sbin/conf.d
- bnc#784659 - remove SuSEconfig calls from yast2-mail

-------------------------------------------------------------------
Fri Aug 10 18:56:59 UTC 2012 - chris@computersalat.de

- update to 2.8.12
  * 20120730
      Bugfix (introduced: 20000314): AUTH is not allowed after
      MAIL. Timo Sirainen.  File: smtpd/smtpd_sasl_proto.c.
  * 20120702
      Bugfix (introduced: 19990127): the BIFF client leaked an
      unprivileged UDP socket. Fix by Jaroslav Skarvada.  File:
      local/biff_notify.c.
  * 20120621
      Bugfix (introduced: Postfix 2.8): the unused "pass" trigger
      client could close the wrong file descriptors.  File:
      util/unix_pass_trigger.c.
- fix for bnc#771303
  * add 'version = 3' to ldap_aliases.cf
- rebase patches
  * main, master, post-install: 2.8.3 -> 2.8.12
  * ssl-release-buffers: 2.8.5 -> 2.8.12
  * vda-v10: 2.8.9 -> 2.8.12
  * dynamic_maps, dynamic_maps_pie, ipv6_disabled, pointer_to_literals
- fix changes file

-------------------------------------------------------------------
Thu Jul 19 06:52:18 UTC 2012 - varkoly@suse.com

- bnc#771811 - postfix update does not regenerate the maps

-------------------------------------------------------------------
Mon Jun 11 09:51:22 UTC 2012 - varkoly@suse.com

- update to 2.8.11
  * 20120520
    - Bugfix (introduced Postfix 2.4): the event_drain() function
      was comparing bitmasks incorrectly causing the program to
      always wait for the full time limit. This error affected
      the unused postkick command, but only after s/fifo/unix/
      in master.cf.  File: util/events.c.
    - Cleanup: laptop users have always been able to avoid
      unnecessary disk spin-up by doing s/fifo/unix/ in master.cf
      (this is currently not supported on Solaris systems).
      However, to make this work reliably, the "postqueue -f"
      command must wait until its requests have reached the pickup
      and qmgr servers before closing the UNIX-domain request
      sockets.  Files: postqueue/postqueue.c, postqueue/Makefile.in.
 
-------------------------------------------------------------------
Wed May  9 10:07:10 UTC 2012 - varkoly@suse.com

- bnc#753910 - {name} instead of %{name} in postfix .spec 
- bnc#756452 - VUL-1: postfix: VRFY allows enumerating users

-------------------------------------------------------------------
Thu May  3 16:47:11 UTC 2012 - chris@computersalat.de

- update to 2.8.10
  * 20120401
      Bitrot: shut up useless warnings about Cyrus SASL call-back
      function pointer type mis-matches. Files: xsasl/xsasl_cyrus.h,
      xsasl/xsasl_cyrus_server.c, xsasl/xsasl_client.c.
  * 20120422
      Bit-rot: OpenSSL 1.0.1 introduces new protocols. Update the
      known TLS protocol list so that protocols can be turned off
      selectively to work around implementation bugs.  Based on
      a patch by Victor Duchovni.  Files: proto/TLS_README.html,
      proto/postconf.proto, tls/tls.h, tls/tls_misc.c, tls/tls_client.c,
      tls/tls_server.c.
- update to 2.8.9
  * 20120217
      Cleanup: missing #include statement for bugfix code added
      20111226. File: local/unknown.c.
  * 20120214
      Bugfix (introduced: Postfix 2.4): extraneous null assignment
      caused core dump when postlog emitted the "usage" message.
      Reported by Kant (fnord.hammer). File: postlog/postlog.c.
  * 20120202
      Bugfix (introduced: Postfix 2.3): the "change header" milter
      request could replace the wrong header. A long header name
      could match a shorter one, because a length check was done
      on the wrong string.  Reported by Vladimir Vassiliev.  File:
      cleanup/cleanup_milter.c.
- use latest VDA patch (2.8.9)

-------------------------------------------------------------------
Thu Apr 12 08:15:06 UTC 2012 - varkoly@suse.com

- bnc#756450 - postfix: remove version from banner

-------------------------------------------------------------------
Mon Apr  9 16:13:28 UTC 2012 - bruno@ioda-net.ch

- add port 587 smtp-auth submission to postfix-fw bnc#756289

-------------------------------------------------------------------
Mon Apr  2 22:09:00 CEST 2012 - dmueller@suse.de

- set exit code explicitely in cond_slp, systemd checks for it

-------------------------------------------------------------------
Tue Mar 13 13:35:13 UTC 2012 - varkoly@suse.com

- Documentation for bnc#751994 - SuSEconfig module postfix does not exist

-------------------------------------------------------------------
Wed Mar  7 06:31:05 UTC 2012 - varkoly@suse.com

- rcpostfix now updates the aliases too

-------------------------------------------------------------------
Mon Feb 27 16:35:56 UTC 2012 - chris@computersalat.de

- update to 2.8.8
  Bugfixes:
  tlsproxy(8) stored TLS sessions with a serverID of
     "tlsproxy" instead of "smtpd", wasting an opportunity for
     session reuse.  File: tlsproxy/tlsproxy.c.
  missing lookup table entry and terminator, causing
     proxymap server segfault when postscreen(8) or verify(8)
     attempted to access their cache via the proxymap server.
     This could never have worked anyway, because the Postfix
     2.8 proxymap protocol does not support cache cleanup.  File
     util/dict.c.
  the Postfix client sqlite
     quoting routine returned the unquoted result instead of the
     quoted text.  The opportunities for misuse are limited,
     because Postfix sqlite files are usually owned by root, and
     Postfix daemons usually run with non-root privileges so
     they can't corrupt the database. Problem reported by Rob
     McGee (rob0).  File: global/dict_sqlite.c.
  the trace service did not
     distinguish between notifications for a non-bounce or a
     bounce message. This code pre-dates DSN support and should
     have been updated when it was re-purposed to handle DSN
     SUCCESS notifications. Problem reported by Sabahattin
     Gucukoglu.  File: bounce/bounce_trace_service.c.
- use latest VDA patch (2.8.5)

-------------------------------------------------------------------
Wed Jan 25 15:12:38 UTC 2012 - varkoly@suse.com

- bnc#743369 - yast2 mail module does not open the firewall
- Set MD5DIR in SuSEconfig.postfix to avoid warnings

-------------------------------------------------------------------
Tue Jan 17 11:14:30 UTC 2012 - varkoly@suse.com

- bnc738693 - upgrade from 11.4 enables mysql service for systemd

-------------------------------------------------------------------
Thu Jan 12 12:18:17 UTC 2012 - varkoly@suse.com

- Add postmap rebuild script to systemv init script too

-------------------------------------------------------------------
Wed Jan 11 14:21:21 UTC 2012 - varkoly@suse.com

- bnc#738900 - cyrus-imapd not receiving mail from postfix

-------------------------------------------------------------------
Tue Dec 13 14:50:45 UTC 2011 - varkoly@suse.com

-  Move the post map rebuild script into the start script

-------------------------------------------------------------------
Tue Dec  6 11:04:12 UTC 2011 - varkoly@suse.com

- Fix the last change in %post

-------------------------------------------------------------------
Fri Dec  2 06:44:28 UTC 2011 - varkoly@suse.com

- bnc#728308 - warning output after update the postfix package

-------------------------------------------------------------------
Wed Nov  9 20:05:38 UTC 2011 - varkoly@suse.com

- update to 2.8.7
  Bugfixes:
  smtpd(8) did not sanitize newline characters in cleanup(8)
     REJECT messages, causing them to be sent out via SMTP as bare newline characters.
  smtpd(8) sent multi-line responses from a before-queue content filter as text with
     bare <LF> instead of <CR><LF>.  
  Workaround: postscreen sent non-compliant SMTP responses (220- followed by 421)
     when it could not give a connection to a real smtpd process, causing some
     remote SMTP clients to bounce mail.

-------------------------------------------------------------------
Thu Nov  3 15:56:23 UTC 2011 - varkoly@suse.com

- Use the systemd macros in the spec file

-------------------------------------------------------------------
Fri Oct 14 16:43:02 CEST 2011 - mhrusecky@suse.cz

- only fix files that exists in %post

-------------------------------------------------------------------
Sun Oct  9 04:30:54 UTC 2011 - crrodriguez@opensuse.org

- Use SSL_MODE_RELEASE_BUFFERS if available, see 
  SSL_CTX_set_mode man page and 
  http://www.imperialviolet.org/2010/06/25/overclocking-ssl.html
  for the full details.

-------------------------------------------------------------------
Tue Sep  6 14:49:47 UTC 2011 - chris@computersalat.de

- update to 2.8.5
  * Bugfix: allow for Milters that send an SMTP server reply
    without RFC 3463 enhanced status code. Reported by Vladimir
    Vassiliev.  File: milter/milter8.c.

-------------------------------------------------------------------
Mon Aug 22 09:31:02 UTC 2011 - varkoly@novell.com

- bnc#684304 - server:mail/postfix: Bugs in SuSEconfig chroot setup script
- Aplly SASL_SOCKET_DIR patch

-------------------------------------------------------------------
Thu Aug 18 09:32:04 UTC 2011 - varkoly@novell.com

- Move SuSEconfig.postfix into /usr/sbin/
  (FATE#311272: Do not rewrite postfix.cf via SuSEconfig)
  SuSEconfig.postfix will be executed only once after installation
  automaticaly. Afterwards only you can start it manually or via
  yast2 mail module.
 
-------------------------------------------------------------------
Fri Aug 12 16:40:40 UTC 2011 - werner@suse.de

- Just the first strep forward to systemd, please test out
    /etc/postfix/system/update_chroot
    /etc/postfix/system/wait_qmgr
    /etc/postfix/system/cond_slp
  and 
    /lib/systemd/system/postfix.service
  and also fill out the missing description.

-------------------------------------------------------------------
Tue Aug  9 11:03:55 UTC 2011 - chris@computersalat.de

- rework SuSE patch
  * add missing SASL stuff in rc.postfix

-------------------------------------------------------------------
Mon Jul 25 09:08:14 UTC 2011 - chris@computersalat.de

- when chrooted and using SASL
  o mount -o bind SASL_SOCKET_DIR into postfix CHROOT

-------------------------------------------------------------------
Mon Jul 11 17:22:19 UTC 2011 - chris@computersalat.de

- update to 2.8.4
  o Linux kernel version 3 support.
  for more info see ChangeLog

-------------------------------------------------------------------
Wed Jul  6 13:11:07 UTC 2011 - varkoly@novell.com

- bnc#686436 - postfix bounces messages with improper use of 8-bit data in message body
- Apply patch

-------------------------------------------------------------------
Fri Jul  1 12:35:59 UTC 2011 - chris@computersalat.de

- rework master.cf patch
  o fix receive_override_options line
- rework SuSE patch
  o sysconfig: remove POSTFIX_WITH_POP_BEFORE_SMTP
  o SuSEconfig: fix receive_override_options line

-------------------------------------------------------------------
Thu Jun 30 20:15:40 UTC 2011 - chris@computersalat.de

- replace vda patch
  o 2.8.1 -> 2.8.3
- fix files doc
  o remove 'doc auxiliary'
    instead cp to pf_docdir

-------------------------------------------------------------------
Sat May 28 04:22:22 UTC 2011 - varkoly@novell.com

- fix spec for building on all repos

-------------------------------------------------------------------
Tue May 24 10:24:51 UTC 2011 - varkoly@novell.com

- bnc#679187 - suseconfig/postfix: missing dependency

-------------------------------------------------------------------
Tue May 17 22:31:46 UTC 2011 - chris@computersalat.de

- fix master.cf
  o fix missing
    - amavis    unix  -       -       n       -       4       smtp
    - localhost:10025 inet   n       -       n       -       -       smtpd
  o add master.cf patch
- rework patches
  o main.cf (add two missing sasl vars)
  o postfix-SuSE (SuSEconfig, cleanup those vars,...)

-------------------------------------------------------------------
Sun May 15 14:16:03 UTC 2011 - chris@computersalat.de

- rework TLS stuff
  o reworked main.cf patch
  o added postfix-SuSE patch 
  o added post-install patch
    Editing /etc/postfix/master.cf, adding missing entry for tlsmgr service
    add only if it really does not exist
- removed Author from description
- updated vda patch
  o vda-2.7.1 > vda-v10-2.8.1
- fix build for SLE_10
  o no fdupes ;)

-------------------------------------------------------------------
Wed May 11 08:23:56 UTC 2011 - varkoly@novell.com

- remove document paths from postfix-files to avoid error messages
  when postfix-doc is not installed

-------------------------------------------------------------------
Tue May 10 09:20:23 UTC 2011 - varkoly@novell.com

- update to 2.8.3 - VUL-0: postfix memory corruption

-------------------------------------------------------------------
Sun Apr 10 07:00:18 UTC 2011 - varkoly@novell.com

- bnc#641271 - postfix-2.7.1: init script cannot properly stop
  multi-instance configurations

-------------------------------------------------------------------
Wed Mar 30 21:21:16 UTC 2011 - varkoly@novell.com

- update to 2.8.2
  * DNSBL/DNSWL:
    o Support for address patterns in DNS blacklist and whitelist lookup results.
    o The Postfix SMTP server now supports DNS-based whitelisting with several safety features
  * Support for read-only sqlite database access.
  * Alias expansion:
    o Postfix now reports a temporary delivery error when the result
      of virtual alias expansion would exceed the virtual_alias_recursion_limit
      or virtual_alias_expansion_limit.
    o To avoid repeated delivery to mailing lists with pathological
      nested alias configurations, the local(8) delivery agent now keeps
      the owner-alias attribute of a parent alias, when delivering mail
      to a child alias that does not have its own owner alias.
  * The Postfix SMTP client no longer appends the local domain when
    looking up a DNS name without ".".
  * The SMTP server now supports contact information that is appended
    to "reject" responses: smtpd_reject_footer
  * Postfix by default no longer adds a "To: undisclosed-recipients:;"
    header when no recipient specified in the message header.
  * tls support:
    o The Postfix SMTP server now always re-computes the SASL mechanism
      list after successful completion of the STARTTLS command.
    o The smtpd_starttls_timeout default value is now stress-dependent.
    o Postfix no longer appends the system-supplied default CA certificates
      to the lists specified with *_tls_CAfile or with *_tls_CApath.
  * New feature: Prototype postscreen(8) server that runs a number
    of time-consuming checks in parallel for all incoming SMTP connections,
    before clients are allowed to talk to a real Postfix SMTP server.
    It detects clients that start talking too soon, or clients that appear
    on DNS blocklists, or clients that hang up without sending any command.

-------------------------------------------------------------------
Thu Feb 10 11:43:28 UTC 2011 - varkoly@novell.com

- bnc#667299 - Postfix LICENSE not marked as documentation

-------------------------------------------------------------------
Mon Jan 17 09:56:32 UTC 2011 - chris@computersalat.de

- add some min LDAP support for virtual LDAP-users
  o sysconfig "WITH_LDAP"
  o add ldap_aliases.cf
  o SuSEconfig.postfix
    virtual_alias_maps = ... ldap:/etc/postfix/ldap_aliases.cf

-------------------------------------------------------------------
Tue Jan  4 12:14:06 UTC 2011 - chris@computersalat.de

- update to 2.7.2
  * Bugfix (introduced Postfix 2.2): Postfix no longer appends
    the system default CA certificates to the lists specified
    with *_tls_CAfile or with *_tls_CApath.  This prevents
    third-party certificates from getting mail relay permission
    with the permit_tls_all_clientcerts feature.  Unfortunately
    this may cause compatibility problems with configurations
    that rely on certificate verification for other purposes.
    To get the old behavior, specify "tls_append_default_CA =
    yes".  Files: tls/tls_certkey.c, tls/tls_misc.c,
    global/mail_params.h.  proto/postconf.proto, mantools/postlink.
  * Compatibility with Postfix < 2.3: fix 20061207 was incomplete
    (undoing the change to bounce instead of defer after
    pipe-to-command delivery fails with a signal). Fix by Thomas
    Arnett. File: global/pipe_command.c.
  * Bugfix: the milter_header_checks parser provided only the
    actions that change the message flow (reject, filter,
    discard, redirect) but disabled the non-flow actions (warn,
    replace, prepend, ignore, dunno, ok).  File:
    cleanup/cleanup_milter.c.
  * Performance: fix for poor smtpd_proxy_filter TCP performance
    over loopback (127.0.0.1) connections. Problem reported by
    Mark Martinec.  Files: smtpd/smtpd_proxy.c.
  * Cleanup: don't apply reject_rhsbl_helo to non-domain forms
    such as network addresses.  This would cause false positives
    with dbl.spamhaus.org.  File: smtpd/smtpd_check.c.
  * Bugfix: the "421" reply after Milter error was overruled
    by Postfix 1.1 code that replied with "503" for RFC 2821
    compliance. We now make an exception for "final" replies,
    as permitted by RFC. Solution by Victor Duchovni. File:
    smtpd/smtpd.c.

-------------------------------------------------------------------
Sat Dec 11 19:50:25 UTC 2010 - chris@computersalat.de

- update vda patch
  o remove 2.6.1-vda-ng.patch
  o remove 2.6.1-vda-ng-64bit.patch
  o add vda-2.7.1.patch
- rework main.cf.patch
  o remove 2.2.9-main.cf.patch
  o add 2.7.1-main.cf.patch

-------------------------------------------------------------------
Tue Dec  7 22:02:56 UTC 2010 - coolo@novell.com

- prereq init scripts network and syslog

-------------------------------------------------------------------
Thu Aug 12 18:57:14 UTC 2010 - varkoly@novell.com

- Remove obsolate postscripts
- bnc#625657 - SuSEconfig.postfix and smtp_use_tls 
- bnc#622873 - postfix doesn't start if ipv6 is disabled

-------------------------------------------------------------------
Tue Jul  6 15:04:30 UTC 2010 - chris@computersalat.de

- reworked bnc#606251 stuff (not checked in to Factory)
  o used my_print_defaults command for parsing of /etc/my.cnf
  o using quotation marks: "$PF_CHROOT"
  o added sysconfig option POSTFIX_MYSQL_CONN=(socket,tcp)

-------------------------------------------------------------------
Wed Jun 16 23:39:09 UTC 2010 - chris@computersalat.de

- bnc#606251 - postfix chrooted mysql.sock lost on mysql restart
  o Now MYSQL_SOCK_DIR is mounted with '-o bind' to postfix CHROOT

-------------------------------------------------------------------
Thu Jun 10 10:55:54 UTC 2010 - varkoly@novell.com

- update to 2.7.1
    * Bugfix (introduced Postfix 2.6) in the XFORWARD implementation,
      which sends remote SMTP client attributes through SMTP-based content filters.
      The Postfix SMTP client did not skip "unknown" SMTP client attributes,
      causing a syntax error when sending an "unknown" client PORT attribute.
    * Robustness: skip LDAP queries with non-ASCII search strings, instead of failing with a database lookup error.
    * Safety: Postfix processes now log a warning when a matchlist has
      a #comment at the end of a line (for example mynetworks or relay_domains).
    * Portability: OpenSSL 1.0.0 changes the priority of anonymous cyphers.
    * Portability: Berkeley DB 5.x is now supported.

-------------------------------------------------------------------
Thu May 20 17:08:26 UTC 2010 - chris@computersalat.de

- fix obviously lost POSTFIX_MYHOSTNAME in SuSEconfig.postfix

-------------------------------------------------------------------
Wed Apr  7 12:39:16 UTC 2010 - varkoly@novell.com

- New file check_mail_queue. This script checks if there are some
  mails in the queue and starts postfix if necessary. After delivering
  the mails postfix will be stoped.

-------------------------------------------------------------------
Thu Apr  1 10:28:09 UTC 2010 - varkoly@novell.com

- bnc#559145 - Changed Domain name not reflected when sending mail
  First /var/run/dhcp-hostname will be evaluated
- Now POSTFIX_SMTP_TLS_CLIENT is ternary : no yes must

-------------------------------------------------------------------
Sun Feb 28 18:38:18 UTC 2010 - varkoly@novell.com
- update to 2.7.0
  * performance
    - Periodic cache cleanup for the verify(8) cache database.    
    - Improved before-queue filter performance.
  * sender reputation
    - The FILTER action in access maps or header/body_checks now supports sender
      reputation schemes that dynamically choose the SMTP source IP address.
  * address verification
    - The verify(8) service now uses a persistent cache by default.
  * content filter
    - The meaning of an empty filter next-hop destination has changed. 
    - The FILTER action in access maps or header/body_checks now supports sender
      reputation schemes that dynamically choose the SMTP source IP address.
  * milter
    - Support for header checks on Milter-generated message headers.  
  Please read /usr/share/doc/packages/postfix/RELEASE_NOTES for details.
-------------------------------------------------------------------
Thu Feb 11 15:16:13 UTC 2010 - coolo@novell.com

- revert the change to PreReq openldap-devel, this increases the
  default installation several MBs

-------------------------------------------------------------------
Tue Feb  2 15:45:26 UTC 2010 - varkoly@novell.com

- bnc#567569 - Postfix: move ldap support to a separate package
- bnc#557239 - postfix delivers mail to user's home instead of /var/spool/mail

-------------------------------------------------------------------
Tue Jan  5 23:28:12 UTC 2010 - chris@computersalat.de

- rpmlint fixes
  o init-script-undefined-dependency $network-remotefs
- fix for SuSEconfig.postfix
  o if use_amavis eq "yes"
    then content_filter "amavis:[127.0.0.1]:10024]" is defined,
    so removed "-o content_filter=smtp:[127.0.0.1]:10024" for smtp
- s#ldconfig#/sbin/ldconfig#

-------------------------------------------------------------------
Tue Dec 22 16:15:00 CEST 2009 - freespacer@gmx.de

- Add support for dovecot as MDA to SuSEconfig.

-------------------------------------------------------------------
Wed Dec 16 10:45:14 CET 2009 - jengelh@medozas.de

- Package documentation as noarch

-------------------------------------------------------------------
Tue Dec 10 13:15:15 CET 2009 - varkoly@suse.de

- Remove postfixs update script. This does not work now.

-------------------------------------------------------------------
Tue Dec  8 19:15:15 CET 2009 - varkoly@suse.de

- Fix the %post section add missed %{fillup_only -an mail}

-------------------------------------------------------------------
Mon Nov 16 17:14:39 CET 2009 - varkoly@suse.de

- bnc#555814 – VUL-0: SMTPD_LISTEN_REMOTE="yes" by default
- bnc#555732 - Invalid $(hostname -i) usage SuSEconfig.postfix 
- bnc#547928 – Postfix does not start during boot process
- Avoid append relay multiple times in POSTFIX_MAP_LIST

-------------------------------------------------------------------
Mon Oct 26 14:36:55 CET 2009 - varkoly@suse.de

- bnc#549612 – SuSEconfig.postfix

-------------------------------------------------------------------
Mon Sep 28 09:22:54 CEST 2009 - varkoly@suse.de

- bnc#540538 – postfix-2.6.1-10.1 installs new files in /etc/postfix and does not generate <file>.db 
- bnc#519438 - Postfix: Running chrooted lets qmgr loosing his syslog-socket
- remove obsolate version tests from SuSEconfig.postfix

-------------------------------------------------------------------
Mon Sep 28 08:24:43 CEST 2009 - varkoly@suse.de

- bnc#525825 - when using cyrus in a chroot environment Suseconfig does not
  create socket /var/lib/imap/socket/lmtp

-------------------------------------------------------------------
Mon Sep 14 11:34:41 UTC 2009 - chris@computersalat.de

- spec
  o fdupes if >= 1100

-------------------------------------------------------------------
Thu Sep 10 21:22:46 CEST 2009 - chris@computersalat.de

- update to 2.6.1
  o merge home:varkoly:Factory and o:F
- spec mods
  o use of getent
- rpmlint
  o remove unneeded dists from examples/chroot-setup/
  o postin-without-ldconfig
  o files-duplicate /usr/share/doc/packages/postfix-doc/html/
  o files-duplicate /usr/share/man/man?

-------------------------------------------------------------------
Mon Apr 13 18:21:14 UTC 2009 - chris@computersalat.de

- added VDA patch
  o Mailbox / Maildir size limit, known also as "soft quota",
    to avoid user take all you disk space
  o Customizable "limit" message when the soft quota limit is reached.
    NOTE: message is sent to senders, but NOT to the owner of the mailbox.
  o Limit only 'INBOX', because some people use IMAP and don't want 
    the same limit in IMAP folder that are differents from INBOX.
  o Support for 'Courier' style Maildir, usefull for people that 
    use courier as pop3/imap server and to get fast soft quota summary.
    Note that it is also compatible with qmail maildir per default.
  o Supports for Courier 'maildirsize' file in Maildir folder that
    is used to read quotas quickly. Note that this option is not
    actived per default and can be dangerous on some NFS client
    implementation
    (like for example Solaris that cache some filesystem operations).
  o Customisable suffix for Maildir support, when share same external
    dict between postfix and pop3/imap server sometime "Maildir/" suffix
    is needed to avoid extra database handling (eg LDAP, MySQL...).
- some improvements of SuSEconfig.postfix
  o POSTFIX_LISTEN: Comma separated list of IP's
  o POSTFIX_INET_PROTO: ipv4, ipv6, all
  o POSTFIX_MYHOSTNAME: define SMTPs FQHOSTNAME
  o POSTFIX_WITH_MYSQL: when using MySQL as backend
  o POSTFIX_BASIC_SPAM_PREVENTION: "custom"
    you can now define your own rules
    - POSTFIX_SMTPD_CLIENT_RESTRICTIONS
    - POSTFIX_SMTPD_HELO_RESTRICTIONS
    - POSTFIX_SMTPD_SENDER_RESTRICTIONS
    - POSTFIX_SMTPD_RECIPIENT_RESTRICTIONS
- added helo_access for helo checks
- added relay for relaying domain
- added MySQL stuff when using MySQL as backend (virtuser)
  o you should consider postfixAdmin as mgmnt interface
  o when runninng postfix chrooted:
    you have to run SUSEconfig each time when you have restarted MySQL
    because of linking mysql.sock

-------------------------------------------------------------------
Sun Mar 29 15:18:52 CEST 2009 - varkoly@suse.de

- bnc#439287 - not all POSTFIX_ADD_* values are properly handled 
               by SuSEconfig.postfix
- bnc#483208 - Postfix configuration trashed after update
- bnc#488268 - SuSEconfig.postfix chroot setup misses /etc/ssl/certs

-------------------------------------------------------------------
Mon Jan 12 11:12:16 CET 2009 - varkoly@suse.de

- bnc#465165 - postfix src package

-------------------------------------------------------------------
Fri Jan  9 17:43:53 CET 2009 - varkoly@suse.de

- bnc#464869 - SuSEconfig.postfix causes DNS lookup
- bnc#460442 - amavisd-new and Postfix need fqdn-hostname in "uname -n"

-------------------------------------------------------------------
Mon Jan  5 13:54:11 CET 2009 - varkoly@suse.de

- update to 2.5.6
  - The SMTP server did not ask for a client certificate
    with "smtpd_tls_req_ccert = yes". Reported by Rob Foehl.

- Avoid reduced TCP performance when reusing an SMTP connection
    with a larger than 4096-byte TCP MSS value. In practice, this
    could happen only with loopback (localhost) connections.

-------------------------------------------------------------------
Sun Nov 16 12:16:03 CET 2008 - varkoly@suse.de

- (bnc#442456) - chrooted postfix and saslauthd

-------------------------------------------------------------------
Tue Nov  4 15:24:41 CET 2008 - ro@suse.de

- fix build

-------------------------------------------------------------------
Tue Nov  4 15:15:03 CET 2008 - varkoly@suse.de

- upgrade must not be executed during installation

-------------------------------------------------------------------
Tue Oct 14 11:16:21 CEST 2008 - varkoly@suse.de

- (bnc#403976) - permissions on /var/lib/postfix changed 
- (bnc#433916) - postfix should be splitted into postfix and postfix-doc

-------------------------------------------------------------------
Thu Sep 11 14:34:22 CEST 2008 - varkoly@suse.de

- (bnc#415216) - Postfix RPM Install Displays Multiple Warnings 
- clean up spec file

-------------------------------------------------------------------
Tue Sep  9 09:57:35 CEST 2008 - varkoly@suse.de

- Update to Version 2.5 patchlevel 5
  * Bugfix (introduced Postfix 2.4): epoll file descriptor leak.
	With Postfix >= 2.4 on Linux >= 2.6, Postfix has an epoll
	file descriptor leak when it executes non-Postfix commands
	in, for example, user-controlled $HOME/.forward files.  
  * Security: some systems have changed their link() semantics,
	and will hardlink a symlink, contrary to POSIX and XPG4.
	Sebastian Krahmer, SuSE. File: util/safe_open.c.

The solution introduces the following incompatible change:
	when the target of mail delivery is a symlink, the parent
	directory of that symlink must now be writable by root only
	(in addition to the already existing requirement that the
	symlink itself is owned by root).  This change will break
	legitimate configurations that deliver mail to a symbolic
	link in a directory with less restrictive permissions.
   * Bugfix: dangling pointer in vstring_sprintf_prepend().
	File: util/vstring.c.
 
-------------------------------------------------------------------
Mon Aug 25 18:45:03 CEST 2008 - mt@suse.de

- init script: copy LSB *-Start tags to *-Stop
- spec file: removed obsolete rc.config update hooks

-------------------------------------------------------------------
Wed Aug  6 13:33:01 CEST 2008 - varkoly@suse.de

- (bnc#414959) postfix doesn't have any "Name: " tag in firewall definition 
- (bnc#405900) SuSEconfig.postfix changes owner and permissions of
  /tmp if smtpd_tls_CApath is not set

- Update to Version 2.5 patchlevel 3
  * Cleanup of code
  * defer delivery when a mailbox file is not owned by the recipient.
    Requested by Sebastian Krahmer, SuSE.
    Specify "strict_mailbox_ownership=no" to ignore ownership discrepancies. 
  * Bugfix: null-terminate CN comment string after sanitization.
  * Bugfix (introduced Postfix 2.0): after "warn_if_reject
    reject_unlisted_recipient/sender", the SMTP server mistakenly
    remembered that recipient/sender validation was already done.

-------------------------------------------------------------------
Wed Jul  9 15:07:46 CEST 2008 - varkoly@suse.de

- (fate#305005) Enable SMTPS in postfix ootb

-------------------------------------------------------------------
Tue Jun 17 12:27:10 CEST 2008 - varkoly@suse.de

- (bnc#396985) sending of NUL character disallowed by RFC2822
- (bnc#397127) without relay is silent about undeliverable mails

-------------------------------------------------------------------
Tue May 13 18:17:09 CEST 2008 - varkoly@suse.de

-  (bnc#389670) - postfix generates invalid config

-------------------------------------------------------------------
Tue Apr  1 16:17:31 CEST 2008 - mkoenig@suse.de

- remove dir /usr/share/omc/svcinfo.d as it is provided now
  by filesystem

-------------------------------------------------------------------
Tue Feb 26 09:59:43 CET 2008 - varkoly@suse.de

- Update to Version 2.5 patchlevel 1
  Changes: The Postfix 2.5 "postfix upgrade-configuration" command
  now works even with Postfix 2.4 or earlier versions of the
  postfix command. When installing Postfix 2.5.0 without upgrading
  from an existing master.cf file, the new master.cf file had an
  incorrect process limit for the proxywrite service. This service
  is used only by the obscure "smtp_sasl_auth_cache_name" and
  "lmtp_sasl_auth_cache_name" configuration parameters. Someone
  needed multi-line support for header/body Milter replies. The
  LDAP client's TLS support was broken in several ways.

-------------------------------------------------------------------
Wed Feb 13 14:58:52 CET 2008 - varkoly@suse.de

-  #360572 - postfix %post script leaves lots of backup files in /etc/postfix/

-------------------------------------------------------------------
Wed Jan 30 12:20:53 CET 2008 - varkoly@suse.de

- Update to Version 2.5 patchlevel 0

Major changes - critical
    ------------------------
    
    [Incompat 20071224] The protocol to send Milter information from
    smtpd(8) to cleanup(8) processes was cleaned up. If you use the
    Milter feature, and upgrade a live Postfix system, you may see an
    "unexpected record type" warning from a cleanup(8) server process.
    To prevent this, execute the command "postfix reload".  The
    incompatibility affects only systems that use the Milter feature.
    It does not cause loss of mail, just a minor delay until the remote
    SMTP client retries.
    
    [Incompat 20071212] The allow_min_user feature now applies to both
    sender and recipient addresses in SMTP commands. With earlier Postfix
    versions, only recipients were subject to the allow_min_user feature,
    and the restriction took effect at mail delivery time, causing mail
    to be bounced later instead of being rejected immediately.
    
    [Incompat 20071206] The "make install" and "make upgrade" procedures
    now create a Postfix-owned directory for Postfix-writable data files
    such as caches and random numbers. The location is specified with
    the "data_directory" parameter (default: "/var/lib/postfix"), and
    the ownership is specified with the "mail_owner" parameter.
    
    [Incompat 20071206] The tlsmgr(8) and verify(8) servers no longer
    use root privileges when opening the address_verify_map,
    *_tls_session_cache_database, and tls_random_exchange_name cache
    files.  This avoids a potential security loophole where the ownership
    of a file (or directory) does not match the trust level of the
    content of that file (or directory).
    
    [Incompat 20071206] The tlsmgr(8) and verify(8) cache files should
    now be stored as Postfix-owned files under the Postfix-owned
    data_directory.  As a migration aid, attempts to open these files
    under a non-Postfix directory are redirected to the Postfix-owned
    data_directory, and a warning is logged.
    
    This is an example of the warning messages:
    
        Dec  6 12:56:22 bristle postfix/tlsmgr[7899]: warning: request
    	to update file /etc/postfix/prng_exch in non-postfix directory
    	/etc/postfix
    
        Dec  6 12:56:22 bristle postfix/tlsmgr[7899]: warning: redirecting
    	the request to postfix-owned data_directory /var/lib/postfix
    
    If you wish to continue using a pre-existing tls_random_exchange_name
    or address_verify_map file, move it to the Postfix-owned data_directory
    and change ownership from root to Postfix (that is, change ownership
    to the account specified with the mail_owner configuration parameter).
    
    [Feature 20071205] The "make install" and "make upgrade" procedures
    now create a Postfix-owned directory for Postfix-writable data files
    such as caches and random numbers. The location is specified with
    the "data_directory" parameter (default: "/var/lib/postfix"), and
    the ownership is specified with the "mail_owner" parameter.
    
    [Incompat 20071203] The "make upgrade" procedure adds a new service
    "proxywrite" to the master.cf file, for read/write lookup table
    access. If you copy your old configuration file over the updated
    one, you may see warnings in the maillog file like this:
    
       connect #xx to subsystem private/proxywrite: No such file or directory
    
    To recover, run "postfix upgrade-configuration" again.
    
    [Incompat 20070613] The pipe(8) delivery agent no longer allows
    delivery with the same group ID as the main.cf postdrop group.
    
    Major changes - malware defense
    -------------------------------
    
    [Feature 20080107] New "pass" service type in master.cf.  Written
    years ago, this allows future front-end daemons to accept all
    connections from the network, and to hand over connections from
    well-behaved clients to Postfix.  Since this feature uses file
    descriptor passing, it imposes no overhead once a connection is
    handed over to Postfix.  See master(5) for a few details.
    
    [Feature 20070911] Stress-adaptive behavior. When a "public" network
    service runs into an "all processes are busy" condition, the master(8)
    daemon logs a warning, restarts the service, and runs it with "-o
    stress=yes" on the command line (under normal conditions it runs
    the service with "-o stress=" on the command line).  This can be
    used to make main.cf parameter settings stress dependent, for
    example:
    
    /etc/postfix/main.cf:
        smtpd_timeout = ${stress?10}${stress:300}
        smtpd_hard_error_limit = ${stress?1}${stress:20}
    
    Translation: under conditions of stress, use an smtpd_timeout value
    of 10 seconds instead of 300, and use smtpd_hard_error_limit of 1
    instead of 20. The syntax is explained in the postconf(5) manpage.
    
    The STRESS_README file gives examples of how to mitigate flooding
    problems.
    
    Major changes - tls support
    ---------------------------
    
    [Incompat 20080109] TLS logging output has changed to make it more
    useful. Existing logfile parser regular expressions may need
    adjustment.
    
    - More log entries include the "hostnamename[ipaddress]" of the
      remote SMTP peer.
    
    - Certificate trust chain error reports show only the first
      error certificate (closest to the trust chain root), and the
      reporting is more human-readable for the most likely errors.
    
    - After the completion of the TLS handshake, the session is logged
      with TLS loglevel >= 1 as either "Untrusted", "Trusted" or
      "Verified" (SMTP client only).
      - "Untrusted" means that the certificate trust chain is invalid,
        or that the root CA is not trusted.
      - "Trusted" means that the certificate trust chain is valid, and
        that the root CA is trusted.
      - "Verified" means that the certificate meets the SMTP client's
        matching criteria for the destination:
        - In the case of a destination name match, "Verified" also
          implies "Trusted".
        - In the case of a fingerprint match, CA trust is not applicable.
    
    - The logging of protocol states with TLS loglevel >= 2 no longer
      reports bogus error conditions when OpenSSL asks Postfix to refill
      (or flush) network I/O buffers.  This loglevel is for debugging
      only; use 0 or 1 in production configurations.
    
    [Feature 20080109] The Postfix SMTP client has a new "fingerprint"
    security level.  This avoids dependencies on CAs, and relies entirely
    on bi-lateral exchange of public keys (really self-signed or private
    CA signed X.509 public key certificates). Scalability is clearly
    limited. For details, see the fingerprint discussion in TLS_README.
    
    [Feature 20080109] The Postfix SMTP server can now use SHA1 instead
    of MD5 to compute remote SMTP client certificate fingerprints. For
    backwards compatibility, the default algorithm is MD5.  For details,
    see the "smtpd_tls_fingerprint_digest" parameter in the postconf(5)
    manual.
    
    [Feature 20080109] The maximum certificate trust chain depth
    (verifydepth) is finally implemented in the Postfix TLS library.
    Previously, the parameter had no effect. The default depth was
    changed to 9 (the OpenSSL default) for backwards compatibility.
    
    If you have explicity limited the verification depth in main.cf,
    check that the configured limit meets your needs. See the
    "lmtp_tls_scert_verifydepth", "smtp_tls_scert_verifydepth" and
    "smtpd_tls_ccert_verifydepth" parameters in the postconf(5) manual.
    
    [Feature 20080109] The selection of SSL/TLS protocols for mandatory
    TLS can now use exclusion rather than inclusion. Either form is
    acceptable; see the "lmtp_tls_mandatory_protocols",
    "smtp_tls_mandatory_protocols" and "smtpd_tls_mandatory_protocols"
    parameters in the postconf(5) manual.
    
    Major changes - scheduler
    -------------------------
    
    [Feature 20071130] Revised queue manager with separate mechanisms
    for per-destination concurrency control and for dead destination
    detection.  The concurrency control supports less-than-1 feedback
    to allow for more gradual concurrency adjustments, and uses hysteresis
    to avoid rapid oscillations.  A destination is declared "dead" after
    a configurable number of pseudo-cohorts(*) reports connection or
    handshake failure.
    
    (*) A pseudo-cohort is a number of delivery requests equal to a
        destination's delivery concurrency.
    
    The drawbacks of the old +/-1 feedback scheduler are a) overshoot
    due to exponential delivery concurrency growth with each pseudo-cohort(*)
    (5-10-20...); b) throttling down to zero concurrency after a single
    pseudo-cohort(*) failure. The latter was especially an issue with
    low-concurrency channels where a single failure could be sufficient
    to mark a destination as "dead", and suspend further deliveries.
    
    New configuration parameters: destination_concurrency_feedback_debug,
    default_destination_concurrency_positive_feedback,
    default_destination_concurrency_negative_feedback,
    default_destination_concurrency_failed_cohort_limit, as well as
    transport-specific versions of the same.
    
    The default parameter settings are backwards compatible with older
    Postfix versions. This may change after better defaults are field
    tested.
    
    The updated SCHEDULER_README document describes the theory behind
    the new concurrency scheduler, as well as Patrik Rak's preemptive
    job scheduler. See postconf(5) for more extensive descriptions of
    the configuration parameters.
    
    Major changes - small/home office
    ---------------------------------
    
    [Feature 20080115] Preliminary SOHO_README document that combines
    bits and pieces from other document in one place, so that it is
    easier to find. This document describes the "mail sending" side
    only.
    
    [Feature 20071202] Output rate control in the queue manager. For
    example, specify "smtp_destination_rate_delay = 5m", to pause five
    minutes between message deliveries. More information in the postconf(5)
    manual under "default_destination_rate_delay".
    
    Major changes - smtp client
    ---------------------------
    
    [Incompat 20080114] The Postfix SMTP client now by default defers
    mail after a remote SMTP server rejects a SASL authentication
    attempt.  Specify "smtp_sasl_auth_soft_bounce = no" for the old
    behavior.
    
    [Feature 20080114] The Postfix SMTP client can now avoid making
    repeated SASL login failures with the same server, username and
    password.  To enable this safety feature, specify for example
    "smtp_sasl_auth_cache_name = proxy:btree:/var/lib/postfix/sasl_auth_cache"
    (access through the proxy service is required). Instead of trying
    to SASL authenticate, the Postfix SMTP client defers or bounces
    mail as controlled with the new smtp_sasl_auth_soft_bounce configuration
    parameter.
    
    [Feature 20071111] Header/body checks are now available in the SMTP
    client, after the implementation was moved from the cleanup server
    to a library module.  The SMTP client provides only actions that
    don't change the message delivery time or destination: warn, replace,
    prepend, ignore, dunno, ok.
    
    [Incompat 20070614] By default, the Postfix Cyrus SASL client no
    longer sends a SASL authoriZation ID (authzid); it sends only the
    SASL authentiCation ID (authcid) plus the authcid's password. Specify
    "send_cyrus_sasl_authzid = yes" to get the old behavior.
    
    Major changes - smtp server
    ---------------------------
    
    [Feature 20070724] Not really major. New support for RFC 3848
    (Received: headers with ESMTPS, ESMTPA, or ESMTPSA); updated SASL
    support according to RFC 4954, resulting in small changes to SMTP
    reply codes and (DSN) enhanced status codes.
    
    Major changes - milter
    ----------------------
    
    [Incompat 20071224] The protocol to send Milter information from
    smtpd(8) to cleanup(8) processes was cleaned up. If you use the
    Milter feature, and upgrade a live Postfix system, you may see an
    "unexpected record type" warning from a cleanup(8) server process.
    To prevent this, execute the command "postfix reload".  The
    incompatibility affects only systems that use the Milter feature.
    It does not cause loss of mail, just a minor delay until the remote
    SMTP client retries.
    
    [Feature 20071221] Support for most of the Sendmail 8.14 Milter
    protocol features.
    
    To enable the new features specify "milter_protocol = 6" and link
    the filter application with a libmilter library from Sendmail 8.14
    or later.
    
    Sendmail 8.14 Milter features supported at this time:
    
    - NR_CONN, NR_HELO, NR_MAIL, NR_RCPT, NR_DATA, NR_UNKN, NR_HDR, 
      NR_EOH, NR_BODY: The filter can tell Postfix that it won't reply
      to some of the SMTP events that Postfix sends. This makes the      
      protocol less chatty and improves performance.
    
    - SKIP: The filter can tell Postfix to skip sending the rest of    
      the message body, which also improves performance.
    
    - HDR_LEADSPC: The filter can request that Postfix does not delete 
      the first space character between header name and header value       
      when sending a header to the filter, and that Postfix does not
      insert a space character between header name and header value 
      when receiving a header from the filter.  This fixes a limitation
      in the old Milter protocol that can break DKIM and DK signatures.
    
    - SETSYMLIST: The filter can override one or more of the main.cf
      milter_xxx_macros parameter settings.
     
    Sendmail 8.14 Milter features not supported at this time:
    
    - RCPT_REJ: report rejected recipients to the mail filter. 
    
    - CHGFROM: replace sender, with optional ESMTP command parameters.
    
    - ADDRCPT_PAR: add recipient, with optional ESMTP command parameters.
    
    It is unclear when (if ever) the missing features will be implemented.
    SMFIP_RCPT_REJ requires invasive changes in the SMTP server recipient
    processing and error handling.  SMFIR_CHGFROM and SMFIR_ADDRCPT_PAR
    require ESMTP command-line parsing in the cleanup server. Unfortunately,
    Sendmail's documentation does not specify what ESMTP options are
    supported, but only discusses examples of things that don't work.
    
    Major changes - address verification
    ------------------------------------
    
    [Incompat 20070514] The default sender address for address verification
    probes was changed from "postmaster" to "double-bounce", so that
    the Postfix SMTP server no longer causes surprising behavior by
    excluding "postmaster" from SMTP server access controls.
    
    Major changes - ldap
    --------------------
    
    [Incompat 20071216] Due to an incompatible API change between
    OpenLDAP 2.0.11 and 2.0.12, an LDAP client compiled for OpenLDAP
    version <= 2.0.11 will refuse to work with an OpenLDAP library
    version >= 2.0.12 and vice versa.
    
    Major changes - logging
    -----------------------
    
    [Incompat 20080109] TLS logging output has changed to make it more
    useful. Existing logfile parser regular expressions may need
    adjustment.
    
    - More log entries include the "hostnamename[ipaddress]" of the
      remote SMTP peer.
    
    - Certificate trust chain error reports show only the first
      error certificate (closest to the trust chain root), and the
      reporting is more human-readable for the most likely errors.
    
    - After the completion of the TLS handshake, the session is logged
      with TLS loglevel >= 1 as either "Untrusted", "Trusted" or
      "Verified" (SMTP client only).
      - "Untrusted" means that the certificate trust chain is invalid,
        or that the root CA is not trusted.
      - "Trusted" means that the certificate trust chain is valid, and
        that the root CA is trusted.
      - "Verified" means that the certificate meets the SMTP client's
        matching criteria for the destination:
        - In the case of a destination name match, "Verified" also
          implies "Trusted".
        - In the case of a fingerprint match, CA trust is not applicable.
    
    - The logging of protocol states with TLS loglevel >= 2 no longer
      reports bogus error conditions when OpenSSL asks Postfix to refill
      (or flush) network I/O buffers.  This loglevel is for debugging
      only; use 0 or 1 in production configurations.
    
    [Incompat 20071216] The SMTP "transcript of session" email now
    includes the remote SMTP server TCP port number.
    
    Major changes - loop detection
    ------------------------------
    
    [Incompat 20070422] [Incompat 20070422] When the pipe(8) delivery
    agent is configured to create the optional Delivered-To: header,
    it now first checks if that same header is already present in the
    message. If so, the message is returned as undeliverable. This test
    should have been included with Postfix 2.0 when Delivered-To: support
    was added to the pipe(8) delivery agent.

-------------------------------------------------------------------
Tue Jan  8 10:00:12 CET 2008 - varkoly@suse.de

- Remove previous fix

-------------------------------------------------------------------
Sun Dec 30 19:58:02 CET 2007 - varkoly@suse.de

- #301335 - [SuSEconfig]: Postfix module uses stderr

-------------------------------------------------------------------
Tue Dec  4 09:02:19 CET 2007 - varkoly@suse.de

- Update to Version 2.4 patchlevel 6
   Bugfix (introduced Postfix 2.2.11): TLS client certificate
   with unparsable canonical name caused the SMTP server's
   policy client to allocate zero-length memory, triggering
   an assertion that it shouldn't do such things.  File:
   smtpd/smtpd_check.c.
 
   Bugfix (introduced Postfix 2.4) missing initialization of
   event mask in the event_mask_drain() routine (used by the
   obsolete postkick(1) command). Found by Coverity.  File:
   util/events.c.
 
   Workaround: the flush daemon forces an access time update
   for the per-destination logfile, to prevent an excessive
   rate of delivery attempts when the queue file system is
   mounted with "noatime".  File: flush/flush.c.
 
- #330276 – /sbin/conf.d/SuSEconfig.postfix could copy certs into smtpd_tls_CApath

-------------------------------------------------------------------
Mon Oct 22 17:38:19 CEST 2007 - sbrabec@suse.cz

- Use correct SuSEfirewall2 rule directory.

-------------------------------------------------------------------
Wed Oct 17 11:52:01 CEST 2007 - varkoly@suse.de

- #333629 - saslauthd typo in SuSEconfig.postfix

-------------------------------------------------------------------
Mon Oct  8 12:37:39 CEST 2007 - varkoly@suse.de

- #331044 - Postfix uses receive_override_options in main.cf

-------------------------------------------------------------------
Sun Sep  9 17:42:27 CEST 2007 - varkoly@suse.de

- fix the last fix

-------------------------------------------------------------------
Tue Sep  4 00:38:58 CEST 2007 - cthiel@suse.de

- fix the last fix

-------------------------------------------------------------------
Mon Sep  3 12:37:43 CEST 2007 - varkoly@suse.de

- Fixing bug: #297622 - SMTPD_LISTEN_REMOTE has no effect

-------------------------------------------------------------------
Mon Aug  6 00:26:31 CEST 2007 - mrueckert@suse.de

- Update to Version 2.4 patchlevel 5
  Bugfix: the loopback TCP performance workaround was ineffective
  due to a wetware bit-flip during code cleanup.  File:
  util/vstream_tweak.c.

(patch level 4)
  Bugfix: the Milter client assumed that a Milter application
  does not modify the message header or envelope, after that
  same Milter application has modified the message body of
  that same email message. This is not a problem with updates
  by different Milter applications.  Problem was triggered
  by Jose-Marcio Martins da Cruz. Also simplified the handling
  of queue file update errors. File: milter/milter8.c.

Workaround: some non-Cyrus SASL SMTP servers require SASL
  login without authzid (authoriZation ID), i.e. the client
  must send only the authcid (authentiCation ID) + the authcid's
  password.  In this case the server is supposed to derive
  the authzid from the authcid. This works as expected when
  authenticating to a Cyrus SASL SMTP server.  To get the old
  behavior specify "send_cyrus_sasl_authzid = yes", in which
  case Postfix sends the (authzid, authcid, password), with
  the authzid equal to the authcid. File: xsasl/xsasl_cyrus_client.c.

Portability: /dev/poll support for Solaris chroot jail setup
  scripts. Files: examples/chroot-setup/Solaris8,
  examples/chroot-setup/Solaris10.

Cleanup: Milter client error handling, so that the (Postfix
  SMTP server's Milter client) does not get out of sync with
  Milter applications after the (cleanup server's Milter
  client) encounters some non-recoverable problem.  Files:
  milter/milter8.c, smtpd/smtpd.c.

Performance: workaround for poor TCP performance on loopback
  (127.0.0.1) connections. Problem reported by Mark Martinec.
  Files: util/vstream_tweak.c, milter/milter8.c, smtp/smtp_connect.c,
  smtpstone/*source.c.

Bugfix: when a milter replied with ACCEPT at or before the
  first RCPT command, the cleanup server would apply the
  non_smtpd_milters setting as if the message was a local
  submission. Problem reported by Jukka Salmi. Also, the
  cleanup server would get out of sync with the milter when
  a milter replied with ACCEPT at the DATA command. Files:
  cleanup/cleanup_envelope.c, smtpd/smtpd.c, milter/milters.c.
- rediffed patches

-------------------------------------------------------------------
Tue Jul 31 18:21:11 CEST 2007 - varkoly@suse.de

- Update to Version 2.4 patchlevel 3
  (patch level 1)
  Bugfix (introduced Postfix 2.3): segfault with HOLD action
  in access/header_checks/body_checks on 64-bit platforms.
  File: cleanup/cleanup_api.c.

Portability (introduced 20070325): the fix for hardlinks
  and symlinks in postfix-install forgot to work around shells
  where "IFS=/ command" makes the IFS setting permanent.  This
  is allowed by some broken standard, and affects Solaris.
  File: postfix-install.

Portability (introduced 20070212): the workaround for
  non-existent library bugs with descriptors >= FD_SETSIZE
  broke with "fcntl F_DUPFD: Invalid argument" on 64-bit
  Solaris.  Files: master/multi_server.c, *qmgr/qmgr_transport.c.

Cleanup: on (Linux) platforms that cripple signal handlers
  with deadlock, "postfix stop" now forcefully stops all the
  processes in the master's process group, not just the master
  process alone.  File: conf/postfix-script.

(patch level 2)
  Bugfix: don't falsely report "lost connection from
  localhost[127.0.0.1]" when Postfix is being portscanned.
  Files: smtpd/smtpd_peer.c, qmqpd/qmqpd_peer.c.

Robustness: recommend a "0" process limit for policy servers
  to avoid "connection refused" problems when the smtpd process
  limit exceeds the default process limit.  File:
  proto/SMTPD_POLICY_README.html.

Safety: when IPv6 (or IPv4) is turned off, don't treat an
  IPv6 (or IPv4) connection from e.g. inetd as if it comes
  from localhost[127.0.0.1].  Files: smtpd/smtpd_peer.c,
  qmqpd/qmqpd_peer.c.

Bugfix: Content-Transfer-Encoding: attribute values are
  case insensitive. File: src/cleanup/cleanup_message.c.

Bugfix: mailbox_transport(_maps) and fallback_transport(_maps)
  were broken when used with the error(8) or discard(8)
  transports. Cause: insufficient documentation.  Files:
  error/error.c, discard/discard.c.

Bugfix (problem introduced Postfix 2.3): when DSN support
  was introduced it broke "agressive" recipient duplicate
  elimination with "enable_original_recipient = no".  File:
  cleanup/cleanup_out_recipient.c.

Bugfix (introduced Postfix 2.3): the sendmail/postdrop
  commands would hang when trying to submit a message larger
  than the per-message size limit. File: postdrop/postdrop.c.

Sabotage the saboteur who insists on breaking Postfix by
  adding gethostbyname() calls that cause maildir delivery
  to fail when the machine name is not found in /etc/hosts,
  or that cause Postfix processes to hang when the network
  is down.

(patch level 3)
  Portability: Victor helpfully pointed out that change
  20070425 broke on non-IPv6 systems. Files: smtpd/smtpd_peer.c,
  qmqpd/qmqpd_peer.c.

-------------------------------------------------------------------
Thu Jun 21 08:30:45 CEST 2007 - varkoly@suse.de

- Bug 285553  amavisd inconsistency

-------------------------------------------------------------------
Tue Jun 19 18:55:43 CEST 2007 - dmueller@suse.de

- provide smtp meta-service as well

-------------------------------------------------------------------
Mon Jun 11 21:32:53 CEST 2007 - lrupp@suse.de

- don't PreRequire /sbin/ip: removed call in SuSEconfig.postfix

-------------------------------------------------------------------
Thu May  3 12:09:13 CEST 2007 - varkoly@suse.de

- dynamic_maps.patch: readded the chunk for dict_tcp and dict_pcre
- replaced prereq for postfix with a prereq on
  %{name} = %{version}
- updated to postfix 2.4, patchlevel 0
  Major changes - safety
  * As a safety measure, Postfix now by default creates mailbox dotlock
    files on all systems. This prevents problems with GNU POP3D which
    subverts kernel locking by creating a new mailbox file and deleting
    the old one
    
  Major changes - Milter support 
  * The support for Milter header modification
    requests was revised.  With minimal change in the on-disk representation,
    the code was greatly simplified, and regression tests were updated
    to ensure that old errors were not re-introduced.  The queue file
    format is entirely backwards compatible with Postfix 2.3.

* Support for Milter requests to replace the message
    body.  Postfix now implements all the header/body modification
    requests that are available with Sendmail 8.13.

* A new field is added to the queue file "size"
    record that specifies the message content length.  Postfix 2.3 and
    older Postfix 2.4 snapshots will ignore this field, and will report
    the message size as it was before the body was replaced.
    
  Major changes - TLS support
  * The check_smtpd_policy client sends TLS certificate
    attributes (client ccert_subject, ccert_issuer) only after successful
    client certificate verification. The reason is that the certification
    verification status itself is not available in the policy request.

* The check_smtpd_policy client sends TLS certificate
    fingerprint information even when the certificate itself was not
    verified.

* The remote SMTP client TLS certificate fingerprint
    can be used for access control even when the certificate itself was
    not verified.

* The format of SMTP server TLS session cache
    lookup keys has changed.  The lookup key now includes the master.cf
    service name.

Major changes - performance
  * Better support for systems that run thousands
    of Postfix processes.  Postfix now supports FreeBSD kqueue(2),
    Solaris poll(7d) and Linux epoll(4) as more scalable alternatives
    to the traditional select(2) system call, and uses poll(2) when
    examining a single file descriptor for readability or writability.
    These features are supported on sufficiently recent versions of
    FreeBSD, NetBSD, OpenBSD, Solaris and Linux; support for other
    systems will be added as evidence becomes available that usable
    implementations exist.

Major changes - delivery status notifications
  * Small changes were made to the default bounce
    message templates, to prevent HTML-aware software from hiding or
    removing the text "<postmaster>", and producing misleading text.

* Postfix no longer announces its name in delivery
    status notifications.  Users believe that Wietse provides a free
    help desk service that solves all their email problems.

Major changes - ETRN support
  * More precise queue flushing with the ETRN,
    "postqueue -s site", and "sendmail -qRsite" commands, after
    minimization of race conditions.  New per-queue-file flushing with
    "postqueue -i queueid" and "sendmail -qIqueueid".

Major changes - small office/home office support
  * Postfix no longer requires a domain name. It
    uses "localdomain" as the default Internet domain name when no
    domain is specified via main.cf or via the machine's hostname.

Major changes - SMTP access control
  * The check_smtpd_policy client sends TLS certificate
    attributes (client ccert_subject, ccert_issuer) only after successful
    client certificate verification. The reason is that the certification
    verification status itself is not available in the policy request.

* The check_smtpd_policy client sends TLS certificate
    fingerprint information even when the certificate itself was not
    verified.

* The remote SMTP client TLS certificate fingerprint can be used for
    access control even when the certificate itself was not verified.

* The Postfix installation procedure no longer
    updates main.cf with "unknown_local_recipient_reject_code = 450".
    Four years after the introduction of mandatory recipient validation,
    this transitional tool is no longer neeed.

-------------------------------------------------------------------
Thu Mar 29 14:33:03 CEST 2007 - rguenther@suse.de

- Add pwdutils BuildRequires to allow postinst script to succeed.
- Add /usr/share/omc directory.

-------------------------------------------------------------------
Mon Feb 26 10:32:36 CET 2007 - varkoly@suse.de

- #247351 - postfix - Ports for SuSEfirewall added via packages

- Move postfix.xml into the postfix-SuSE tarball

- #228479 - Postfix is configured for inet_protocols=all if
  selecting ipv4 only support during installation.
  Now we set both inet_protocols and inet_interfaces to all.
  This means the available interfaces and protocols will be used.
  To avoid bogus warnings inet_proto.c was patched.

- #251598 - postfix use pointers for literals

-------------------------------------------------------------------
Mon Jan 15 13:14:07 CET 2007 - varkoly@suse.de

- #144104 - postfix does not start

- Implementing Fate #301840: Postfix XML Service Description Document

- Enhancing /etc/sysconfig/postfix descripton to avoid problems
  like Bug 228678 - Problems with setting up chroot environment if 
  /var/spool is not on same filesystem as /var

-------------------------------------------------------------------
Wed Nov 22 03:03:18 CET 2006 - mrueckert@suse.de

- moved the dict handling into a preun script instead of postun
  and do not remove the dict entry on upgrade (#223176)
- removed duplicates in the filelists.

-------------------------------------------------------------------
Fri Nov 10 11:43:00 CET 2006 - varkoly@suse.de

- #218229 - Postfix SuSEconfig script increases the max_proc line each run in master.cf

-------------------------------------------------------------------
Sat Oct 28 11:41:50 CEST 2006 - varkoly@suse.de

- #206414 - /usr/lib/sasl2/smtpd.conf misplaced

-------------------------------------------------------------------
Tue Oct 24 22:32:45 CEST 2006 - varkoly@suse.de

- #202119 – SuSEconfig script for Postfix incomplete
- #202162 – Postfix 2.3.2 slightly incorrect, Cyrus SASL unavailable
- #203174 – /sbin/conf.d/SuSEconfig.postfix should configure a TLS session cache for postfix 2.2
- #203575 – postfix-2.2.9-10 chokes without scache
- #213589 - No development package/headers for postfix

-------------------------------------------------------------------
Wed Aug 16 01:24:20 CEST 2006 - ro@suse.de

- also add libpostfix-milter.so*

-------------------------------------------------------------------
Mon Aug 14 12:34:37 CEST 2006 - varkoly@suse.de

- updated to postfix 2.3, patchlevel 2
- Major changes
  - Name server replies that contain a malformed hostname are now flagged
    as permanent errors instead of transient errors.
  - DSN support as described in RFC 3461 .. RFC 3464.
  - The SMTP client now implements the LMTP protocol.
  - Milter (mail filter) application support, compatible with Sendmail
    version 8.13.6 and earlier.
- Major changes - SASL authentication
  - Plug-in support for SASL authentication in the SMTP server and in the
    SMTP/LMTP client.
  - The Postfix-with-Cyrus-SASL build procedure has changed.
  - Support for sender-dependent ISP accounts.
- Major changes - SMTP client
  - The SMTP client now implements the LMTP protocol.
  - This version addresses a performance stability problem with remote
     SMTP servers.
- Major changes - SMTP server
  - The Postfix SMTP server now refuses to receive mail from the network
    if it isn't running with postfix mail_owner privileges.
  - Optional suppression of remote SMTP client hostname lookup and hostname
    verification.
  - SMTPD Access control based on the existence of an address->name mapping
- Major changes - TLS
  - New concept: TLS security levels ("none", "may", "encrypt", "verify" 
    or "secure") in the Postfix SMTP client. 
  - Both the Postfix SMTP client and server can be configured without a
    client or server certificate.
- See
    /usr/share/doc/packages/postfix/RELEASE_NOTES
    /usr/share/doc/packages/postfix/TLS_CHANGES
    /usr/share/doc/packages/postfix/README_FILES/SASL_README
  for detailed informations.

-------------------------------------------------------------------
Wed Aug  2 16:18:30 CEST 2006 - varkoly@suse.de

- Only %{conf_backup_dir} is contained by the package not /var/adm/backup

-------------------------------------------------------------------
Mon Jul 10 16:21:31 CEST 2006 - varkoly@suse.de

- Bugfix: #190639 Default number of processes for postfix 
- Bugfix: #190270 postfix-postgresql

-------------------------------------------------------------------
Fri Jun  2 19:58:38 CEST 2006 - varkoly@suse.de

- Bugfix: #98188 - SuSE.tar.gz filename collision in cyrus/postfix SRPMs

-------------------------------------------------------------------
Mon Apr 24 17:14:40 CEST 2006 - varkoly@suse.de

- Bugfix: #165786 - yast2-mail modul uses obsolate postfix attributes

-------------------------------------------------------------------
Mon Mar 20 10:21:55 CET 2006 - varkoly@suse.de

- updated to postfix 2.2, patchlevel 9.
- Reasons:
  Bugfix: the LMTP client would reuse a session after negative
        reply to the RSET command (which may happen when client and
        server somehow get out of sync). 
  Bugfix: race condition in the connection caching protocol,
        causing the SMTP delivery agent to hang after delivering
        mail, while trying to save a connection.
  Bugfix: the best_mx_transport, mailbox_transport and
        fallback_transport features did not write a per-recipient
        defer logfile record when the target delivery agent was
        broken.
  Bugfix: an EHLO I/O error after STARTTLS would be reported
        as a STARTTLS I/O error.
  Bugfix: the *SQL, proxy and LDAP maps were not defined in
        user-land commands such as postqueue.
  Bugfix: the anvil server would terminate after "max_idle"
        seconds, even when this was less than the anvil_rate_time_unit
        interval.
  Portability: 64-bit support for LINUX chroot script by Keith
        Owens.
  Safety: new "smtp_cname_overrides_servername" parameter.

Bugfix: mailbox_command_maps was not subject to $name
        expansion.
  Bugfix: don't ignore the per-site policy when SSL library
        initialization fails.
  Bugfix: a TLS per-site MUST_NOPEERMATCH policy could not
        override a stronger main.cf policy, while a per-site NONE
        policy could.
  Bugfix: a combined TLS per-site (host, recipient) policy
        of (NONE, MAY) changed a global MUST policy into NONE, and
        a global MUST_NOPEERMATCH into MAY. The result is now NONE.
        Problem found by exhaustive simulation.
  Bugfix: an empty remote_header_rewrite_domain value caused
        trivial-rewrite to dereference a null pointer, but only in
        regression tests, not in production.  Postfix rewrites
        addresses in the remote rewriting context only when the
        remote_header_rewrite_domain parameter value is non-empty.
  Workaround: a malformed domain name lookup result (such as
        null MX record) is now treated as a hard error, so that
        Postfix will no longer repeatedly try to deliver mail until
        the message expires in the queue.  However, this will not
        reject mail with reject_unknown_sender/recipient_domain.
        That would require too much change for a stable release.

-------------------------------------------------------------------
Fri Jan 27 02:19:42 CET 2006 - mls@suse.de

- converted neededforbuild to BuildRequires

-------------------------------------------------------------------
Tue Jan 24 09:11:46 CET 2006 - varkoly@suse.de

- Fixing the spec-file 
- Bugfix: ID#143682 - Spurious (obsoleted?) configuration variable in postfix's main.cf

-------------------------------------------------------------------
Mon Jan 23 13:00:13 CET 2006 - varkoly@suse.de

- Bugfix: ID#140173 postfix allows relaying on the whole subnet
- Bugfix: ID#144091 postfix doesn't start with the latest kernel

-------------------------------------------------------------------
Fri Jan 20 11:56:24 CET 2006 - varkoly@suse.de

- Bugfix: ID#144091
- Postfix makes an entry in slp servre for smtp & smtps

-------------------------------------------------------------------
Mon Jan 16 14:49:29 CET 2006 - varkoly@suse.de

- removing openldap from "neededforbuild"

-------------------------------------------------------------------
Wed Nov 30 11:11:16 CET 2005 - choeger@suse.de

- updated to postfix 2.2, patchlevel 6

-------------------------------------------------------------------
Tue Oct 11 15:03:56 CEST 2005 - choeger@suse.de

- added patch ldap_api_changes.patch: openldap2.3 enforces to use
  "The C LDAP Application Program Interface"

-------------------------------------------------------------------
Mon Aug 15 13:55:32 CEST 2005 - choeger@suse.de

- Bugfix Bugzilla ID#104663 - consistent use of variables in postfix
  init-script
- Bugfix Bugzilla ID#104568 - SuSEconfig.postfix doesnt set $PATH properly to
  find all binaries.

-------------------------------------------------------------------
Fri Aug 12 10:25:09 CEST 2005 - mmj@suse.de

- Package the /usr/lib/sendmail -> /usr/sbin/sendmail link [#102947]

-------------------------------------------------------------------
Tue Jul 26 11:05:29 CEST 2005 - choeger@suse.de

- Bugfix Bugzilla ID#93884 - package postfix uses -fsigned-char
  Remove -fsigned-char option for ppc and s390 archs

-------------------------------------------------------------------
Mon Jul 25 11:52:18 CEST 2005 - choeger@suse.de

- updated to postfix 2.2, patchlevel 5:
  - Portability: the connection caching code broke on LP64
    systems (inherited from Stevens Network Programming).
    Files:  util/unix_send_fd.c, util/unix_recv_fd.c. This code
    is back-ported from the Postfix 2.3 snapshot release.
  - Robustness: the SMTP client now disables connection caching
    when it is unable to communicate with the scache(8) server,
    instead of looping forever and not delivering mail. File:
    global/scache_clnt.c.  This code is back-ported from the
    Postfix 2.3 snapshot release.
  - Portability: after sending a socket, the scache(8) server
    now waits for an ACK from the connection cache client before
    closing the socket that it just sent. Files: scache/scache.c,
    global/scache_clnt.c. This code is back-ported from the
    Postfix 2.3 snapshot release.
  - Portability: on LP64 systems, integer expressions are int,
    but sizeof() and pointer difference expressions are larger.
    Point fixes for a few discrepancies with variadic functions
    that expect int (the permanent fix is to change the receiving
    modules, but that results in too much change, and is not
    allowed in the stable release).  Files: tls/tls_scache.c,
    util/clean_env.c, util/vstring.h, smtpstone/qmqp-source.c.

-------------------------------------------------------------------
Mon Jul 18 15:49:16 CEST 2005 - choeger@suse.de

- force to set strict_8bitmime to "no" when POSTFIX_MDA != cyrus,
  because once it is set to "yes", nobody sets it back.
- only install /etc/pam.d/smtp if suse_version > 920
- use Prereq instead of Requires for mysql and postgresql subpackages

-------------------------------------------------------------------
Wed Jul 13 16:59:14 CEST 2005 - choeger@suse.de

- added /etc/pam.d/smtp configuration file

-------------------------------------------------------------------
Thu Jul  7 16:44:05 CEST 2005 - choeger@suse.de

- Fixed build on x86_64: use -fPIC for libraries and -fPIE for the
  rest

-------------------------------------------------------------------
Tue Jul  5 17:57:48 CEST 2005 - choeger@suse.de

- applied dynamic maps patch of LaMont Jones at debian
- Fix to SuSEconfig.postfix: only touch tlsmgr line in master.cf,
  if it is the new one using unix socket instead of fifo

-------------------------------------------------------------------
Thu Jun 30 17:52:10 CEST 2005 - uli@suse.de

- build with -fPIE (not -fpie) to avoid GOT overflow on s390x

-------------------------------------------------------------------
Thu Jun 23 10:22:18 CEST 2005 - choeger@suse.de

- updated to postfix 2.2, patchlevel 4

-------------------------------------------------------------------
Fri Jun 17 17:06:39 CEST 2005 - choeger@suse.de

- fixed build using -pie/-fpie (hopefully)

-------------------------------------------------------------------
Fri Jun 17 11:04:03 CEST 2005 - choeger@suse.de

- Build using -pie

-------------------------------------------------------------------
Fri May 13 18:24:50 CEST 2005 - choeger@suse.de

- set strict_8bitmime parameter to yes when using cyrus mailbox
  delivery

-------------------------------------------------------------------
Wed May  4 15:54:33 CEST 2005 - choeger@suse.de

- Bugfix ID#66325 - postfix: permissions
  also ship a postfix.paranoid file with the package with all suid and sgid
  bits disabled

-------------------------------------------------------------------
Tue May  3 16:29:04 CEST 2005 - choeger@suse.de

- updated to postfix 2.2, patchlevel 3
- Bugfix ID#75717 - postfix init scripts reports success allthough postfix is
  not running:
  use checkproc again instead of "master -t", as "master -t" seems to be broken

-------------------------------------------------------------------
Thu Apr 21 17:42:04 CEST 2005 - choeger@suse.de

- updated to postfix 2.2, patchlevel 2
- Bugfix ID#74712, problems with read-only mounting of $chroot/proc:
  don't mount /var/spool/postfix/proc ro as that results in /proc also mounted
  ro.
- Bugfix ID#74709, postfix configuration and USE_IPV6 in
  sysconfig/network/config

-------------------------------------------------------------------
Tue Mar 15 17:46:44 CET 2005 - choeger@suse.de

- updated to postfix 2.2, patchlevel 1
  Postfix 2.2.1 solves four portability problems that surfaced in
  the week since the 2.2.0 release, one harmless bug in the TLS
  session cache cleaning code, and cleans up minor documentation
  problems.

-------------------------------------------------------------------
Thu Mar 10 10:18:45 CET 2005 - choeger@suse.de

- 2.2.0 is out

-------------------------------------------------------------------
Mon Mar  7 14:15:08 CET 2005 - choeger@suse.de

- update to RC2

-------------------------------------------------------------------
Wed Mar  2 15:01:33 CET 2005 - choeger@suse.de

- make it compile with gcc4

-------------------------------------------------------------------
Mon Feb 28 18:03:36 CET 2005 - choeger@suse.de

- RC1 of 2.2 is out

-------------------------------------------------------------------
Fri Feb 18 16:34:07 CET 2005 - choeger@suse.de

- use "usr/sbin/postfix upgrade-configuration" now instead of
  "etc/postfix/post-install upgrade-package"

-------------------------------------------------------------------
Thu Feb 17 19:28:22 CET 2005 - choeger@suse.de

- removed some @ chars (don't know how they slipped in)

-------------------------------------------------------------------
Thu Feb 17 13:42:18 CET 2005 - choeger@suse.de

- update to current pre 2.2 snapshot (2.2-20050216)
  2.2 release could happen next week

-------------------------------------------------------------------
Thu Feb 10 09:08:18 CET 2005 - choeger@suse.de

- added patch needed for the Kolab project (this patch is part of the upcoming
  postfix 2-2 release), see
  http://wiki.kolab.org/index.php/Kolab-major-app-patches

-------------------------------------------------------------------
Thu Feb  3 10:00:38 CET 2005 - choeger@suse.de

- s/X-UnitedLinux-Should-Start/Should-Start/

-------------------------------------------------------------------
Wed Feb  2 16:44:34 CET 2005 - choeger@suse.de

- added long_header.patch
  long lines piped into postfix sendmail can lead to errors.

-------------------------------------------------------------------
Wed Feb  2 08:52:19 CET 2005 - choeger@suse.de

- Bugfix ID#49307: faster postfix startup: don't use hashed directories if
  possible:
  - added patch empty_hash_queue_names.patch to be able to modify
    hash_queue_names parameter.
  - added check to %post to change hash_queue_names in case of
    /var/spool/postfix residing on a reiserfs partition when doing
    a fresh installation
- Bugfix ID#50386 - postfix must prereq /sbin/ip (iproute2)

-------------------------------------------------------------------
Fri Jan 28 16:29:05 CET 2005 - choeger@suse.de

- updated tls+ipv6 patchkit to v1.26
  - Bugfix: Incomplete error checking in getaddrinfo() could cause lmtpd to
    crash with debug_peer_list defined. Carsten Hoeger, SuSE.  File:
    util/match_ops.c
  - Linux workaround: When mynetworks isn't set, a chrooted process could not
    read the IPv6 address information from /proc. We now invoke own_inet_addr()
    before chrooting, while processing main.cf. [backported from 2.2-nonprod
    snapshot] File: global/mail_params.c
  - Safety: when IPv6 netmask can't be determined, mynetworks is not set and
    mynetworks_style = subnet, assume /128 (host only). Until now, Tru64Unix
    assumed /64 (good for real subnets, but not safe for tunnel ranges etc.).
    File: util/inet_addr_local.c

-------------------------------------------------------------------
Sat Jan 15 20:48:48 CET 2005 - schwab@suse.de

- Use <owner>:<group> in permissions file.

-------------------------------------------------------------------
Thu Jan 13 16:16:41 CET 2005 - choeger@suse.de

- Two fixes to ipv6-patch related bugs:
  - Bugfix Bugzilla ID#49435 - VUL-0: Postfix, permit_mx_backup, IPv6, chroot
    --> Open Relay!
  - Bugfix Bugzilla ID#49695 - SEGV while lmtp delivery
- mount /proc into chroot jail to be able to access /proc/net/if_inet6

-------------------------------------------------------------------
Wed Nov 24 14:46:16 CET 2004 - schwab@suse.de

- Put options first in find command line.

-------------------------------------------------------------------
Tue Nov  9 09:20:27 CET 2004 - choeger@suse.de

- setting LC_ALL=POSIX in SuSEconfig.postfix

-------------------------------------------------------------------
Wed Sep 29 18:14:13 CEST 2004 - choeger@suse.de

- Bugfix Bugzilla ID#46462, postfix should switch biff off

-------------------------------------------------------------------
Tue Sep 21 12:48:02 CEST 2004 - choeger@suse.de

- updated to  postfix 2.1, patchlevel 5
  (several small bugfixes)
- updated tls+ipv6 patchkit (there have been some small bugs)
- use v4 address 127.0.0.1 as amavisd-new local contact address
  as amavisd is not listening on any v6 address

-------------------------------------------------------------------
Mon Sep 20 09:51:25 CEST 2004 - choeger@suse.de

- also chmod the .db file resulting of a postmap (related to
  bugfix ID#39045

-------------------------------------------------------------------
Thu Sep 16 13:57:32 CEST 2004 - choeger@suse.de

- Bugfix Bugzilla ID#39045 - tls_per_site table updates in SuSEconfig.postfix
  introduced POSTFIX_MAP_LIST in /etc/sysconfig/postfix where additional
  maps maintained by SuSEconfig.postfix can be added

-------------------------------------------------------------------
Thu Sep 16 10:34:58 CEST 2004 - choeger@suse.de

- Bugfix Bugzilla ID#45252 - rpm calls SuSEconfig.permissions which calls rpm
  -> 3 minute timeout
  Also don't call rpm from SuSEconfig.postfix
- Speedup: set timestamp of $TMPDIR/main.cf into the past to workaround
  postconf safety which is not neccessary, because we do not touch the main.cf,
  the postfix daemons are using.

-------------------------------------------------------------------
Mon Sep 13 11:57:15 CEST 2004 - choeger@suse.de

- added $time to Required-Start in init-script

-------------------------------------------------------------------
Thu Aug 26 14:15:31 CEST 2004 - choeger@suse.de

- do not filter locally delivered mail when USE_AMAVIS=yes
  (don't set content_filter=vscan in main.cf)
- removed obsolete vscan service definition from master.cf

-------------------------------------------------------------------
Fri Aug 20 12:47:52 CEST 2004 - choeger@suse.de

- use "$MASTER_BIN -t" to check whether postfix is already running
  in start section of init-script. That's more reliable then checkproc.

-------------------------------------------------------------------
Wed Jul 14 17:48:29 CEST 2004 - choeger@suse.de

- Bugfix Bugzilla ID#42995 - SuSEconfig.postfix should ignore
  .swp and other files in /etc/aliases.d

-------------------------------------------------------------------
Tue Jul 13 16:22:02 CEST 2004 - choeger@suse.de

- Bugfix Bugzilla ID#42281,  openssl ca segfaults:
  added missing [ policy_anything ] configuration
  options to openssl.cnf

-------------------------------------------------------------------
Mon Jul 12 14:58:58 CEST 2004 - choeger@suse.de

- updated to  postfix 2.1, patchlevel 4
- updated tls+ipv6 patchkit to v1.25
- new feature POSTFIX_REGISTER_SLP in /etc/sysconfig/postfix
  to be able to totally disable slptool from being started

-------------------------------------------------------------------
Tue May 25 12:42:45 CEST 2004 - choeger@suse.de

- updated tls+ipv6 patchkit to v1.24:
  - Bugfix: Prefixlen non-null host portion validation (in CIDR maps for
    example) yielded incorrect results sometimes because signed arithmetic was
    used instad of unsigned.
  - Patch correction: The TLS+IPv6 patch for Postfix 2.1.0 missed the master.cf
    update (used for new installattions). Added it back.
- as tls and ipv6 patches have not been completely ported to postfix 2.1
  new documentation system, especially the new postconf(5) manpage is
  missing the complete ipv6 and tls related configuration parameters,
  readded the sample-* files from ipv6+tls to %doc/samples

-------------------------------------------------------------------
Tue May  4 11:24:20 CEST 2004 - choeger@suse.de

- update to postfix 2.1, patchlevel 1:
 - Patch 01 fixes a signal 11 problem in the check_policy_service
   feature when SASL support is compiled in but turned off in the
   SMTP server (smtpd_sasl_auth_enable = no).

-------------------------------------------------------------------
Wed Apr 28 10:46:55 CEST 2004 - choeger@suse.de

- added now officially released tls patchkit 0.8.18-2.1.0-0.9.7d to
  the source package for the user to be able to build a non-ipv6
  postfix package

-------------------------------------------------------------------
Mon Apr 26 17:46:01 CEST 2004 - choeger@suse.de

- official tls+ipv6 v1.23 patchkit released:
  - Patch fixes: Several code fixes to make the patch compile and work
    correctly when compiled without IPv6 support.
  - Bugfix (Solaris only?): address family length was not updated
    which could cause client hostname validation errors.  File:
    smtpd/smtpd_peer.c
  - Portability: added support for Darwin 7.3+. This may need some
    further testing.
  - Cleanup: Restructure and redocument interface address retrieval
    functions. (This reduced the number of preprocessor statements
    from 99 to 93 ;) File: util/inet_addr_local.c
  - Cleanup: make several explicit casts to have compilers shut their
    pie holes about uninteresting things.

-------------------------------------------------------------------
Fri Apr 23 11:22:35 CEST 2004 - choeger@suse.de

- update to final postfix v2.1

-------------------------------------------------------------------
Wed Apr 21 17:35:26 CEST 2004 - choeger@suse.de

- Bugfix: changed {main,master}.cf backup path in specfile, but not in
  SuSEconfig script

-------------------------------------------------------------------
Wed Apr 21 11:55:43 CEST 2004 - choeger@suse.de

- update to postfix 2.1 RC5

-------------------------------------------------------------------
Mon Apr 19 14:23:19 CEST 2004 - choeger@suse.de

- update to current postfix 2.1 release candidate (RC4)

-------------------------------------------------------------------
Wed Apr  7 13:09:09 CEST 2004 - choeger@suse.de

- Bugfix Bugzilla ID#38569, exit SuSEconfig.postfix if
  mktemp fails

-------------------------------------------------------------------
Tue Mar 30 11:13:38 CEST 2004 - choeger@suse.de

- Bugfix Bugzilla ID#37409
  the saslauthd socket is not copied to chroot jail due to
  a wrong test in SuSEconfig.postfix (used -L instead of -S)

-------------------------------------------------------------------
Mon Mar 29 20:03:16 CEST 2004 - choeger@suse.de

- only add ::1 to inet_interfaces when SMTPD_LISTEN_REMOTE=no
  AND ipv6 is enabled

-------------------------------------------------------------------
Mon Mar 29 11:03:56 CEST 2004 - choeger@suse.de

- Bugfix Bug ID#37293, SuSEConfig complains POSTFIX_ADD_* parameters are
  unknown (in turkish locale settings)
  added LC_CTYPE=POSIX to SuSEconfig.postfix

-------------------------------------------------------------------
Thu Mar 25 10:54:26 CET 2004 - choeger@suse.de

- updated to tls+ipv6 version 1.22 (related to Bugzilla ID#35884)
  - Feature: Support "inet_interfaces = IPv4:all" and "inet_interfaces =
    IPv6:all", to restrict postfix to use either IPv4-only or IPv6-only. A more
    complete implementation will be part of a future patch. (Slightly modified)
    patch by Michal Ludvig, SuSE.  Files: util/interfaces_to_af.[ch],
    util/inet_addr_local.c, global/own_inet_addr.c,
    global/wildcard_inet_addr.[ch], master/master_ent.ch
  - Bugfix: In Postfix snapshots, a #define was misplaced with the effect that
    IPv6 subnets were not included in auto- generated $mynetworks (i.e.,
    mynetworks not defined in main.cf, when also mynetworks_style=subnet) on
    Linux 2.x systems.  File: utils/sys_defs.h 
- now adding ::1 to inet_interfaces when SMTPD_LISTEN_REMOTE=no
  (related to Bugzilla ID#35884)
- enabled ipv6 again

-------------------------------------------------------------------
Thu Mar 18 12:37:44 CET 2004 - choeger@suse.de

- updated to most recent snapshot version 2.0.19-20040312:
  Patch 19 fixes two low-priority problems:

- When mail is submitted at a high rate with the Postfix sendmail
    command, the pickup daemon is keps busy long enough that it it
    terminated by the watchdog timer (a feature that prevents Postfix
    from locking up permanently).
  
  - Malformed addresses in SMTP commands could result in table looks
    with zero-length search strings, causing trouble with NIS lookups.

-------------------------------------------------------------------
Wed Mar 17 16:51:00 CET 2004 - choeger@suse.de

- disable IPv6 patch as it introduces problems for people
  who do not use IPv6, see Bugzilla ID#35884,
  "ipv6 mynetworks don't work"

-------------------------------------------------------------------
Mon Mar  8 15:58:35 CET 2004 - choeger@suse.de

- be a nice packager and strictly follow
  http://www.porcupine.org/postfix-mirror/newdoc/PACKAGE_README.html
  (added setgid_group=... to post-install upgrade-package)

-------------------------------------------------------------------
Fri Feb 27 11:37:56 CET 2004 - choeger@suse.de

- update to most recent version 2.0.18-20040209

-------------------------------------------------------------------
Mon Feb 23 15:25:20 CET 2004 - choeger@suse.de

- Bugfix Bugzilla ID#34817, SuSEconfig.postfix doesn't specify direct path to
  "postconf" and generates errors if run via sudo by a non-root user.

-------------------------------------------------------------------
Fri Feb  6 13:15:49 CET 2004 - choeger@suse.de

- update to postfix 2.0.18-20040205
- enabled tls+ipv6 patch as it is now available for latest
  pre 2.1 snapshot

-------------------------------------------------------------------
Mon Feb  2 13:22:54 CET 2004 - choeger@suse.de

- finally, the official TLS patchkit of Lutz hit the ground

-------------------------------------------------------------------
Mon Feb  2 11:02:16 CET 2004 - choeger@suse.de

- additional fix for the TLS extensions patch
  should also fix Bugzilla ID#34218

-------------------------------------------------------------------
Fri Jan 23 12:15:00 CET 2004 - choeger@suse.de

- fixed the smtp segfault

-------------------------------------------------------------------
Thu Jan 22 21:37:51 CET 2004 - choeger@suse.de

- updated to postfix 2.0.18-20040122
- added new feature for specfile usetls to en/dis-able TLS
  support
- temporary removed TLS support (self adapted patch to most recent
  postfix snapshot version) as it currently results in smtp segfaulting

-------------------------------------------------------------------
Thu Jan 22 13:53:44 CET 2004 - choeger@suse.de

- update to recent postfix snapshot version 2.0.17-20040120
  which will become the next official release 2.1 around
  next week according to Wietse Venema.
- added possibility to compile using the combined IPV6/TLS patch
  which can be downloaded from http://www.ipnet6.org/postfix/
  just set useipv6 to 1 at the top of the specfile.

-------------------------------------------------------------------
Thu Jan 22 01:45:58 CET 2004 - ro@suse.de

- remove call to ldap_enable_cache
  (function has been removed from openldap and was already
  obsolete before (warning was issued back then))

-------------------------------------------------------------------
Wed Jan 14 16:38:06 CET 2004 - choeger@suse.de

- added openslp register/derigister calls to postfix init-script

-------------------------------------------------------------------
Mon Jan 12 15:50:35 CET 2004 - choeger@suse.de

- add postfix user to group mail in case of POSTFIX_MDA==cyrus
  to let postfix lmtp access /var/lib/imap/socket/lmtp

-------------------------------------------------------------------
Thu Jan  8 16:00:30 CET 2004 - choeger@suse.de

- Bugfix Bugzilla ID#33421, SMTP-Auth and relaying
  added permit_sasl_authenticated also to smtpd_recipient_restrictions
  in SuSEconfig.postfix

-------------------------------------------------------------------
Mon Dec  1 14:51:06 CET 2003 - choeger@suse.de

- always create temp files and always remove them later on

-------------------------------------------------------------------
Mon Nov 17 12:51:09 CET 2003 - choeger@suse.de

- some .spec improvements

-------------------------------------------------------------------
Thu Oct 30 12:13:51 CET 2003 - mmj@suse.de

- Run SuSEconfig after install

-------------------------------------------------------------------
Wed Oct 29 20:23:44 CET 2003 - mmj@suse.de

- Don't build as root
- Be nice and clean up after ourselves

-------------------------------------------------------------------
Tue Oct 14 15:47:52 CEST 2003 - choeger@suse.de

- update to postfix v2.0.16
- update to tls extensions v0.8.16
- Fix for Bugzilla ID#32114, fixed some if condition syntaxes

-------------------------------------------------------------------
Tue Sep 16 10:29:25 CEST 2003 - choeger@suse.de

- fixed example for POSTFIX_RELAYHOST, Bug ID#30756

-------------------------------------------------------------------
Mon Sep  8 09:49:49 CEST 2003 - choeger@suse.de

- updated some sysconfig descriptions
- removed relays.osirosoft.com from the examples, Bug ID#30215

-------------------------------------------------------------------
Thu Sep  4 15:40:25 CEST 2003 - kukuk@suse.de

- Fix next useradd call

-------------------------------------------------------------------
Wed Sep  3 11:31:54 CEST 2003 - choeger@suse.de

- conf/postfix-files as input for /etc/permissions.d/postfix (Bug ID#29915)
- generate better amavisd-new master.cf line:
  limit maxproc to 2 and use brackets around localhost
  (Bug ID#29917)

-------------------------------------------------------------------
Mon Sep  1 13:08:33 CEST 2003 - choeger@suse.de

- use conf/postfix-files as input for directories and permissions
  for files/directories in/below $queue_directory and $command_directory
- use /var/lib/imap/socket/lmtp as lmtp socket in SuSEconfig.postfix
  and change access modes of /var/lib/imap and /var/lib/imap/socket
  to let postfix lmtp access the unix socket

-------------------------------------------------------------------
Fri Aug 29 11:43:53 CEST 2003 - kukuk@suse.de

- Create postfix user as system account [Bug #29611]

-------------------------------------------------------------------
Fri Aug 29 08:48:52 CEST 2003 - kukuk@suse.de

- Adjust sendmail permissions
- Create /var/spool/postfix/public with permissions postfix is
  using

-------------------------------------------------------------------
Fri Aug 29 00:27:03 CEST 2003 - mmj@suse.de

- Add sendmail to /etc/sysconfig/mail

-------------------------------------------------------------------
Thu Aug 14 18:41:19 CEST 2003 - choeger@suse.de

- update to Postfix 2.0 Patch 14
- Bugfix Bugzilla ID#28921:
  missing activation metadata in sysconfig template

-------------------------------------------------------------------
Wed Jul 30 11:48:21 CEST 2003 - choeger@suse.de

- new macros for stop/restart of services on rpm update/removal

-------------------------------------------------------------------
Mon Jul 21 13:33:53 CEST 2003 - choeger@suse.de

- chown user:group instead of user.group

-------------------------------------------------------------------
Fri Jul 11 11:23:05 CEST 2003 - choeger@suse.de

- update to tls extensions 0.8.15-2.0.13-0.9.7b

-------------------------------------------------------------------
Tue Jul  1 15:44:05 CEST 2003 - choeger@suse.de

- updated SuSEconfig to use amavisd-new instead of amavis[d]-postfix

-------------------------------------------------------------------
Mon Jun 30 17:43:20 CEST 2003 - choeger@suse.de

- update to Postfix 2.0 Patch 13
- After "postfix reload", the master daemon now warns when the
  inet_interfaces parameter setting has changed, and ignores the
  change, instead of passing incorrect information to the smtp
  server.
- After the postdrop command change with Postfix 2.0.11, the postcat
  command no longer recognized "maildrop" queue files as valid.
- Mail could bounce when two messages were delivered simultaneously
  to a non-existent mailbox file. The safe_open() code that prevents
  race condition exploits will now try a little harder when it
  actually encounters a race condition.
- update to tls extensions 0.8.14-2.0.12-0.9.7b

-------------------------------------------------------------------
Thu Jun 12 13:27:48 CEST 2003 - choeger@suse.de

- also change path to smtpd.conf in sysconfig template parameter
  description dependent on what %{_lib} is set to.

-------------------------------------------------------------------
Thu Jun 12 09:51:33 CEST 2003 - choeger@suse.de

- update to postfix 2.0, patchlevel 12

-------------------------------------------------------------------
Wed Jun 11 17:55:21 CEST 2003 - choeger@suse.de

- mkdir -p $RPM_BUILD_ROOT/%{_libdir}/sasl2 instead of
           $RPM_BUILD_ROOT/usr/lib/sasl2
  and we also can build on 64bit archs

-------------------------------------------------------------------
Wed Jun 11 14:25:29 CEST 2003 - choeger@suse.de

- package /usr/lib/sasl2/smtpd.conf using %{_libdir}/sasl2/smtpd.conf
- added /etc/postfix to filelist

-------------------------------------------------------------------
Wed Jun 11 09:11:11 CEST 2003 - choeger@suse.de

- update to postfix 2.0, patchlevel 11
- update to tls extensions 0.8.13-2.0.10-0.9.7b

-------------------------------------------------------------------
Fri May 23 14:33:01 CEST 2003 - choeger@suse.de

- updated SuSE/master.cf toplevel comments

-------------------------------------------------------------------
Fri May 23 14:19:43 CEST 2003 - choeger@suse.de

- update to postfix 2.0, patchlevel 10

-------------------------------------------------------------------
Mon May 19 12:42:36 CEST 2003 - choeger@suse.de

- remove installed (but unpackaged) file /etc/postfix/aliases

-------------------------------------------------------------------
Mon May 19 10:12:52 CEST 2003 - choeger@suse.de

- path to ca, certificate and key is relative to $POSTFIX_SSL_PATH, 
  added $POSTFIX_SSL_PATH/ to the relevant parts of SuSEconfig.postfix

-------------------------------------------------------------------
Wed May 14 11:29:48 CEST 2003 - choeger@suse.de

- correctly handle new POSTFIX_SMTP_TLS_CLIENT parameter in
  SuSEconfig.postfix (activate/deactivate master.cf entries)

-------------------------------------------------------------------
Wed May 14 11:05:36 CEST 2003 - choeger@suse.de

- added libxcrypt to chroot jail, Bugzilla ID#25766

-------------------------------------------------------------------
Tue May 13 20:40:00 CEST 2003 - choeger@suse.de

- added TLS_CLIENT support, Bugzilla ID#26647

-------------------------------------------------------------------
Wed Apr 23 13:43:02 CEST 2003 - choeger@suse.de

- update to postfix 2.0, patchlevel 9

-------------------------------------------------------------------
Tue Apr 15 10:27:13 CEST 2003 - ro@suse.de

- fixed neededforbuild

-------------------------------------------------------------------
Mon Apr  7 12:58:01 CEST 2003 - choeger@suse.de

- update to postfix 2.0, patchlevel 7
- update to tls extensions 0.8.13-2.0.6-0.9.7a
- Bugfix Bugzilla ID#25905, do not restrict mailbox size per default

-------------------------------------------------------------------
Sat Mar  8 15:56:26 CET 2003 - choeger@suse.de

- use checkproc to check if there really is a postfix master
  process running when there's a pid file lying around.
  (Bugzilla ID#24910)

-------------------------------------------------------------------
Thu Mar  6 11:02:12 CET 2003 - choeger@suse.de

- update to Postfix 2.0 Patch 06
- Postfix now truncates non-address information in message address
  headers (comments, etc.) to 250 characters per address. This should
  rarely present a problem.  Reportedly, junk mail from poorly written
  software can trigger the protection, but that is no great loss.
- Some little fixes to documentation.

-------------------------------------------------------------------
Tue Mar  4 10:29:31 CET 2003 - choeger@suse.de

- update to Postfix 2.0 Patch 05
- The SMTP server's hard and soft error limits were off by one.
  With "smtpd_hard_error_limit = 1", Postfix will now disconnect
  after the first error, instead of the second one.
- The proxymap server could deadlock when the mydestination parameter
  setting included a proxymapped lookup table.
- Some little fixes to documentation.

-------------------------------------------------------------------
Sat Mar  1 16:41:10 CET 2003 - choeger@suse.de

- when updating postfix, check whether post-install changed
  main/master.cf and update md5sums to not confuse SuSEconfig
- when installing postfix on a fresh system, create md5sums
  in %post to be able to let check_md5_and_move() detect
  changes that a user might have done without running SuSEconfig
  before.

-------------------------------------------------------------------
Thu Feb 27 19:01:32 CET 2003 - choeger@suse.de

- no longer remove md5sums of main.cf and master.cf during
  postinstall, as SuSEconfig then no longer knows, whether
  main.cf/master.cf had been modified by the user.
  Disadvantage: as postfix permanently needs basic changes
  to both main and master.cf, SuSEconfig.postfix will frequently
  generate .SuSEconfig files although the user did not change anything
  Bugzilla ID#24432

-------------------------------------------------------------------
Fri Feb 21 10:04:48 CET 2003 - choeger@suse.de

- update to Postfix 2.0 Patch 04
  - The format of maildir filenames is synchronized with the present
    version of the maildir definition document. This format was already
    adopted by the 20030126 snapshot release.
  - The time limit on delivery to external commands was not enforced.
    This was broken probably some time before the first public Postfix
    release.
  - Duplicate elimination after virtual alias expansion works again.
    This was broken with the introduction of the original recipient
    attribute.
  - The local pickup daemon dropped incomplete records from local
    submissions. This was broken somewhere in the middle of 2002.

-------------------------------------------------------------------
Sat Feb 15 14:59:54 CET 2003 - choeger@suse.de

- Bugfix Bugzilla ID#23675: new service proxymap will not be
  appended during update

-------------------------------------------------------------------
Mon Feb 10 16:25:39 CET 2003 - choeger@suse.de

- also check whether amavisd-postfix is installed and set up
  filter section in master.cf

-------------------------------------------------------------------
Thu Jan 30 11:43:03 CET 2003 - choeger@suse.de

- update to Postfix 2.0 Patch 03
  - Postfix 2.0 broke relocated table lookup results with mail not
    rejected at the SMTP port, causing "User has moved to" text to be
    deleted.
  - A widely used maildir filename generating algorithm was broken.
    This affects all Postfix versions with maildir support. Instead of
    TIME.PID_COUNT.HOST Postfix now uses TIME.DEVICE_INODE.HOST.
  - Postfix 2.0 gave incorrect FILTER_README instructions for sites
    that wish to disable virtual alias mapping before the content
    filter.
- postfix-lib64.patch code now integrated in postfix

-------------------------------------------------------------------
Fri Jan 24 11:52:17 CET 2003 - choeger@suse.de

- changed SuSEconfig.postfix and smtpd.conf to use sasl2

-------------------------------------------------------------------
Thu Jan 23 13:07:17 CET 2003 - choeger@suse.de

- forgot to add tlsmgr to master.cf

-------------------------------------------------------------------
Thu Jan 23 11:43:24 CET 2003 - choeger@suse.de

- Hmmm, just noticed, that suddenly 2.0.0.x became 2.0.x
  must have missed something...
- updated SuSE/master.cf (new proxymap service)

-------------------------------------------------------------------
Thu Jan 16 10:21:27 CET 2003 - choeger@suse.de

- added POSTFIX_ADD_MESSAGE_SIZE_LIMIT as example to sysconfig.postfix
  (Bugzilla ID#22907)

-------------------------------------------------------------------
Tue Jan 14 12:51:56 CET 2003 - choeger@suse.de

- build using sasl2

-------------------------------------------------------------------
Fri Jan 10 13:24:43 CET 2003 - choeger@suse.de

- update to postfix v2 (version 2.0.0.2)

-------------------------------------------------------------------
Wed Dec 11 11:44:51 CET 2002 - choeger@suse.de

- added sysconfig metadata to sysconfig templates
- updated to new tls extensions

-------------------------------------------------------------------
Fri Nov 29 13:16:42 CET 2002 - choeger@suse.de

- Bugfix Bugzilla ID#21865: don't copy directories into
  directories when updating chroot jail in cpifnewer()
- Update to version 1.11, pl12

-------------------------------------------------------------------
Tue Nov 19 14:29:36 CET 2002 - choeger@suse.de

- new SuSEconfig.postfix features:
  . SMTP-AUTH server
  . SMTP-AUTH client
  . TLS Server

-------------------------------------------------------------------
Tue Nov  5 15:08:43 CET 2002 - choeger@suse.de

- quote args of tr command

-------------------------------------------------------------------
Mon Nov  4 13:52:51 CET 2002 - choeger@suse.de

- new feature: POSTFIX_ADD_* command in sysconfig/postfix to
  be able to add any regular postfix command via SuSEconfig
- Bugfix Bugzilla ID#21120 added POSTFIX_ADD_MAILBOX_SIZE_LIMIT
  as example with value 0 (unlimited)
- added a header to main.cf explaining that many postfix
  parameters have been added to the end of main.cf

-------------------------------------------------------------------
Tue Oct 15 11:27:46 CEST 2002 - choeger@suse.de

- Bugfix for Bugzilla ID#20754
  missed some parameters when restoring main.cf or master.cf
  from scratch

-------------------------------------------------------------------
Wed Oct  9 20:34:03 CEST 2002 - choeger@suse.de

- NULLCLIENT did not work because SuSEconfig searches for the wrong
  keyword

-------------------------------------------------------------------
Mon Oct  7 17:47:56 CEST 2002 - choeger@suse.de

- Bugfix related to Bugzilla IDs  20506, 18298, 19294:
  masquerade_classes should not be extended by envelope_recipient

-------------------------------------------------------------------
Fri Sep  6 17:04:57 CEST 2002 - choeger@suse.de

- added ypbind to X-UnitedLinux-Should-Start in init-script

-------------------------------------------------------------------
Wed Aug 28 11:37:38 CEST 2002 - choeger@suse.de

- added restoration mechanism to restore master.cf and/or main.cf
  if they got deleted by (intention or) accident to SuSEconfig.postfix
- added ldap to X-UnitedLinux-Should-Start

-------------------------------------------------------------------
Mon Aug 26 11:11:26 CEST 2002 - choeger@suse.de

- Bugfix Bugzilla ID#18298: when setting FROM_HEADER, also unqualified
  envelope recipients should be qualified to FROM_HEADER, not to
  myorigin, added envelope_recipient to masquerade_classes
- Bugfix Bugzilla ID#18297: %post touches main.cf and master.cf so it
  may happen, that an update leaves .SuSEconfig files.
  Remove /var/adm/SuSEconfig/md5/etc/postfix/main.cf and master.cf
  in %post
- Bugfix Bugzilla ID#18301: sendmail and postfix have different
  opinions on the usage of NULLCLIENT. Moved NULLCLIENT to
  sysconfig.postfix.POSTFIX_NULLCLIENT
- added exim to Conflicts

-------------------------------------------------------------------
Thu Aug 22 09:47:51 CEST 2002 - choeger@suse.de

- wait for qmgr in the background for a maximum of 60 seconds

-------------------------------------------------------------------
Wed Aug 21 17:07:39 CEST 2002 - choeger@suse.de

- Bugfix for init-script:
  wait for qmgr to be ready before calling postfix flush

-------------------------------------------------------------------
Wed Aug 14 15:59:04 CEST 2002 - choeger@suse.de

- added accidently removed line in master.cf for amavis,
  Bugzilla ID#17732

-------------------------------------------------------------------
Tue Aug 13 10:08:47 CEST 2002 - choeger@suse.de

- exclude .rpmsave and .rpmorig from /etc/aliases.d expansion

-------------------------------------------------------------------
Wed Aug  7 11:55:55 CEST 2002 - choeger@suse.de

- added netcfg to Prereq (/etc/aliases)

-------------------------------------------------------------------
Tue Aug  6 11:28:56 CEST 2002 - choeger@suse.de

- added pcre openldap2-client to prereq (Bugzilla ID#17447)

-------------------------------------------------------------------
Mon Aug  5 16:38:49 CEST 2002 - choeger@suse.de

- completed Prereq

-------------------------------------------------------------------
Fri Jul 19 16:49:57 CEST 2002 - choeger@suse.de

- Bugfix for the handling of POSTFIX_MASQUERADE_DOMAIN
  and FROM_HEADER
- removed main.cf from SuSE.tar.gz
- added X-UnitedLinux-Should-Start: cyrus to init-script

-------------------------------------------------------------------
Thu Jul 18 13:57:44 CEST 2002 - choeger@suse.de

- set local as default MDA again
  reason: postfix does not execute any external programs like procmail
  with uid 0, so root mails will go to /var/mail/nobody, which
  will confuse people
- remove setting of SUSE_RELEASE version in the (E)SMTP banner

-------------------------------------------------------------------
Fri Jul 12 11:08:03 CEST 2002 - choeger@suse.de

- removed /etc/aliases from filelist, it's now in netcfg

-------------------------------------------------------------------
Thu Jul 11 14:16:25 CEST 2002 - choeger@suse.de

- removed 'q' flag from vscan transport definition, because
  current amavis versions have a rfc2821_mailbox_addr function
- remove old aliases.db files in %post
- do not use unset in %post

-------------------------------------------------------------------
Mon Jul  8 15:14:00 CEST 2002 - choeger@suse.de

- make procmail the default MDA

-------------------------------------------------------------------
Fri Jul  5 17:11:03 CEST 2002 - choeger@suse.de

- use %{_lib} macro to detect platforms with lib64
  directories

-------------------------------------------------------------------
Fri Jul  5 16:34:38 CEST 2002 - choeger@suse.de

- make chroot jail function lib64 aware

-------------------------------------------------------------------
Thu Jul  4 13:53:40 CEST 2002 - uli@suse.de

- fixed libnsl detection on lib64 systems

-------------------------------------------------------------------
Thu Jul  4 10:34:26 CEST 2002 - choeger@suse.de

- ldap_url_search_st is no longer available in OpenLDAP v2.1
  added a patch, that uses ldap_url_parse
- added new feature POSTFIX_MDA, Bugzilla ID#16720

-------------------------------------------------------------------
Fri Jun  7 13:34:09 CEST 2002 - choeger@suse.de

- changed POSTFIX_BASIC_SPAM_PREVENTION. It can now be set to
  either off(default), medium or hard
- cleaned up SuSEconfig.postfix
- prepared for /etc/aliases.d

-------------------------------------------------------------------
Wed Jun  5 18:09:16 CEST 2002 - choeger@suse.de

- new FEATURES: POSTFIX_RBL_HOSTS, POSTFIX_BASIC_SPAM_PREVENTION,
  Bugzilla ID#16383
- moved sample-*.cf files to %{_docdir}/postfix/samples

-------------------------------------------------------------------
Wed Jun  5 11:14:29 CEST 2002 - choeger@suse.de

- update to patchlevel 11, version 1.1.11
- new FEATURE: POSTFIX_UPDATE_MAPS

-------------------------------------------------------------------
Fri May 24 13:39:05 CEST 2002 - choeger@suse.de

- update to patchlevel 10, version 1.1.10
- create required users and groups in %pre install

-------------------------------------------------------------------
Thu Apr 25 16:55:58 CEST 2002 - choeger@suse.de

- removed provides of my own packagename...

-------------------------------------------------------------------
Fri Apr 19 13:25:32 CEST 2002 - choeger@suse.de

- Bugfix for README.SuSE: POSTFIX_CREATECF is now
  MAIL_CREATE_CONFIG

-------------------------------------------------------------------
Thu Apr  4 11:36:52 CEST 2002 - choeger@suse.de

- update to patchlevel 7, version 1.1.7
- introduced new feature POSTFIX_LAPTOP

-------------------------------------------------------------------
Tue Mar 26 15:21:18 CET 2002 - choeger@suse.de

- update to patchlevel 5, version 1.1.5

-------------------------------------------------------------------
Tue Mar 12 15:28:24 CET 2002 - choeger@suse.de

- Bugfix: don't check whether POSTFIX_MASQUERADE_DOMAIN is empty
  or not, because else we won't be able to clear it.

-------------------------------------------------------------------
Thu Feb 28 10:21:36 CET 2002 - choeger@suse.de

- added flags=q to amavis transport definition (link@suse.de):
  [...]
  If your postfix is older than snapshot 20010610, leave out the
  "flags=q" part. However, amavis will not function properly with
  envelope adresses that contain whitespace in the local-part.
  This is quite rare, but has been observed a few times.
  [...]

-------------------------------------------------------------------
Mon Feb 25 13:58:05 CET 2002 - choeger@suse.de

- update to version 1.1.4 (1.1, patchlevel 4)
  Bugfix (excerpt from HISTORY):
  ..................................................................
  off-by-one error, causing a null byte to be
  written outside dynamically allocated memory in
  the queue manager with addresses of exactly 100
  bytes long, resulting in SIGSEGV on systems with
  an "exact fit" malloc routine.
  ..................................................................
- added new option SMTPD_LISTEN_REMOTE to /etc/sysconfig/mail
  which has been introduced by the SuSE dist-team (excerpt):
  ..................................................................
  sendmail does have an option to listen only on the local port,
  this should be the default.
  A flag "SMTPD_LISTEN_REMOTE" in /etc/sysconfig/mail will be used
  to decide if port 25 should be opened externally.
  The sendmail package will send a mail to root explaining this
  fact. sendmail updates will copy the value of START_SMTPD to this
  new flag.
  ..................................................................
  As this is a totally different behaviour compared to old releases,
  SMTPD_LISTEN_REMOTE will be set to "yes", if POSTFIX_CREATECF
  (now MAIL_CREATE_CONFIG) had been set to "yes" before the update.
  
-------------------------------------------------------------------
Thu Feb 21 12:39:55 CET 2002 - choeger@suse.de

- fillup workaround

-------------------------------------------------------------------
Thu Feb 21 11:23:52 CET 2002 - choeger@suse.de

- hostname handling is still annoying
  added some piece of code to SuSEconfig.postfix to
  get a valid hostname

-------------------------------------------------------------------
Mon Feb 18 16:03:40 CET 2002 - choeger@suse.de

- %postinst cleanup:
  . use rename_sysconfig_variable macro
  . use remove_and_set macro
  instead of directly calling fillup

-------------------------------------------------------------------
Wed Feb 13 17:27:37 CET 2002 - choeger@suse.de

- FQHOSTNAME has been removed from /etc/sysconfig/network/config
  and is now set in /etc/HOSTNAME, which wasn't FQ in the past.
  *Please, don't change it again*
- if POSTFIX_LOCALDOMAINS is set, do not append
  "$myhostname, localhost.$mydomain" anymore

-------------------------------------------------------------------
Tue Feb 12 16:31:14 CET 2002 - choeger@suse.de

- Also take care of the localhost:10025 mailer definition when
  setting up chroot options

-------------------------------------------------------------------
Mon Feb 11 09:27:47 CET 2002 - choeger@suse.de

- Do not set myorigin to FROM_HEADER

-------------------------------------------------------------------
Thu Feb  7 10:10:55 CET 2002 - choeger@suse.de

- Bugfix(SuSEconfig.postfix): typo in path to /etc/sysconfig/amavis

-------------------------------------------------------------------
Mon Feb  4 11:25:51 CET 2002 - choeger@suse.de

- SuSEconfig.postfix enhancement: get hostname from hostname -f
  Bugfix: get FQHOSTNAME from /etc/sysconfig/network/config
- added -y to fillup_and_insserv to create startlinks
  after installation
- changed company name to SuSE Linux AG in copyright headers

-------------------------------------------------------------------
Mon Feb  4 09:44:45 CET 2002 - choeger@suse.de

- update to postfix 1.1.3 and tls extensions 0.8.3
  minor bugfixes
  http://groups.yahoo.com/group/postfix-users/message/52953

-------------------------------------------------------------------
Fri Feb  1 20:37:27 CET 2002 - choeger@suse.de

- Bugfix: Forgot to assign a name to TMPDIR in SuSEconfig.postfix

-------------------------------------------------------------------
Fri Feb  1 11:43:17 CET 2002 - choeger@suse.de

- added resolve_local_panic.patch
  http://groups.yahoo.com/group/postfix-users/message/52746

-------------------------------------------------------------------
Wed Jan 30 15:44:10 CET 2002 - choeger@suse.de

- update of tls extensions to 0.8.2

-------------------------------------------------------------------
Mon Jan 28 15:00:07 CET 2002 - choeger@suse.de

- update to version 1.1.2
- sysconfig.mail changes

-------------------------------------------------------------------
Tue Jan 22 12:08:43 CET 2002 - choeger@suse.de

- renamed cleanup.fillup to sysconfig.postfix.cleanup
- added postqueue patch, see 
  http://groups.yahoo.com/group/postfix-users/message/51611
  for more details

-------------------------------------------------------------------
Mon Jan 21 14:56:39 CET 2002 - choeger@suse.de

- update to official release version 1.1.0
- moved some stuff to /etc/sysconfig/mail
- cleaned up /etc/rc.config access
- added some safety checks to SuSEconfig.postfix

-------------------------------------------------------------------
Wed Jan 16 16:58:53 CET 2002 - choeger@suse.de

- update to version 20020115 (release candidate for Postfix
  official release version 1.1)

-------------------------------------------------------------------
Tue Jan 15 16:20:13 CET 2002 - choeger@suse.de

- some improvements to SuSEconfig.postfix

-------------------------------------------------------------------
Fri Jan 11 17:52:25 CET 2002 - choeger@suse.de

- updated to version 20020107
- added postinstall section to update from previous versions
  of postfix

-------------------------------------------------------------------
Tue Jan  8 20:11:07 CET 2002 - egmont@suselinux.hu

- Changed /sbin/init.d to /etc/init.d in init script comment

-------------------------------------------------------------------
Mon Jan  7 15:01:16 CET 2002 - choeger@suse.de

- added sender_canonical_maps to SuSEconfig.postfix to let
  the new YaST2 module setup this map similar to sendmails
  genericstable

-------------------------------------------------------------------
Thu Jan  3 13:51:45 CET 2002 - kukuk@suse.de

- SuSEconfig.postfix shell script is no config file [Bug #12712]

-------------------------------------------------------------------
Wed Dec 19 15:26:20 CET 2001 - choeger@suse.de

- Made initscript more LSB compliant (status codes)
- Bugfix for Bugzilla ID#12672 (improve explanation
  of POSTFIX_LOCALDOMAINS)
- robustness enhancement for SuSEconfig.postfix

-------------------------------------------------------------------
Fri Dec 14 15:42:31 CET 2001 - choeger@suse.de

- typo in specfile (master.cf installed as main.cf)

-------------------------------------------------------------------
Thu Dec 13 11:25:44 CET 2001 - choeger@suse.de

- update to version 20011210
- some changes to SuSEconfig.postfix:
  . added POSTFIX_UPDATE_CHROOT_JAIL variable, see README.SuSE
  . some cleanups for chroot jail
  . little bugfixes

-------------------------------------------------------------------
Thu Dec 13 01:16:57 CET 2001 - ro@suse.de

- moved rc.config.d -> sysconfig

-------------------------------------------------------------------
Wed Nov 28 18:36:10 CET 2001 - choeger@suse.de

- update to version 20011127
- some changes to SuSEconfig.postfix:
  . added more robustness (Jehova)
  . do not chown -R postfix to /var/spool/postfix
  . query for package cyrus-sasl instead of sasl

-------------------------------------------------------------------
Tue Nov 20 16:13:00 CET 2001 - choeger@suse.de

- update to version 20011115
  Bugfix for a memory exhaustion bug in smtpd
  see http://groups.yahoo.com/group/postfix-users/message/46597
- remove START_ variable

-------------------------------------------------------------------
Fri Nov  9 14:54:24 CET 2001 - choeger@suse.de

- some changes to specfile (thanks to Simon J Mudd from whom
  I copied some code)

-------------------------------------------------------------------
Tue Nov  6 15:19:18 CET 2001 - choeger@suse.de

- fix some SuSEconfig.postfix bugs:
  . master.cf chroot column can also contain '-'
  . don't do anything if POSTFIX_CREATECF != yes

-------------------------------------------------------------------
Fri Oct 26 13:11:17 CEST 2001 - choeger@suse.de

- update to most recent snapshot version 20011008

-------------------------------------------------------------------
Thu Oct 25 14:36:47 CEST 2001 - choeger@suse.de

- update to pl05

-------------------------------------------------------------------
Fri Oct 19 12:53:44 CEST 2001 - choeger@suse.de

- Bugfix, Bugzilla ID#11914

-------------------------------------------------------------------
Wed Sep 26 09:33:34 CEST 2001 - choeger@suse.de

- ALWAYS create master.cf, even is POSTFIX_CREATECF is set
  to no, because else chroot mode may not work, Bugzilla ID#11359

-------------------------------------------------------------------
Thu Sep 13 14:34:06 CEST 2001 - choeger@suse.de

- removed an obsolete echo in start section of init-script

-------------------------------------------------------------------
Thu Sep  6 13:48:29 CEST 2001 - choeger@suse.de

- Bugfix in init-script: redirect output of postfix start
  to dev/null and do not use startproc to start postfix

-------------------------------------------------------------------
Tue Sep  4 18:09:43 CEST 2001 - choeger@suse.de

- update to tls-extensions v0.7.9
  see http://groups.yahoo.com/group/postfix-users/message/41094
  for details

-------------------------------------------------------------------
Fri Aug 31 13:54:02 CEST 2001 - choeger@suse.de

- update of tls-extensions to 0.7.8
- update of postfix to pl04
- Bugfix: - check if postfix spool is set up before starting postfix
          - start postfix with postfix start, because postfix-script
            wouldn't be executed, else.

-------------------------------------------------------------------
Tue Jul 10 14:34:17 CEST 2001 - choeger@suse.de

- update of tls-extensions to 0.7.3

-------------------------------------------------------------------
Thu Jun 28 13:06:47 CEST 2001 - choeger@suse.de

- bugfix: remove libs from chroot jail, that are no longer
  valid, Bugzilla ID#9133
- bugfix: init script was not LSB compliant, Bugzilla ID#9063

-------------------------------------------------------------------
Fri Jun 15 09:44:49 CEST 2001 - choeger@suse.de

- added cyrus to require start in init-script
- "bugfix": bootstrap problem cyrus-imapd <-> postfix:
  cyrus-imapd must run before postfix, but fails to create
  lmtp socket, because /var/spool/postfix/public directory
  isn't present. FIX: add it to filelist

-------------------------------------------------------------------
Wed Jun 13 15:08:33 CEST 2001 - choeger@suse.de

- install postrop with special SGID modes

-------------------------------------------------------------------
Tue Jun 12 13:29:36 CEST 2001 - choeger@suse.de

- improved SuSEconfig.postfix
  - better main.cf handling
  - new feature: chroot or not chroot

-------------------------------------------------------------------
Mon May 28 09:36:49 CEST 2001 - choeger@suse.de

- major bugfix: memory leak in the LDAP client module
- minor bugfixes

-------------------------------------------------------------------
Wed May  9 20:15:27 CEST 2001 - mfabian@suse.de

- bzip2 sources

-------------------------------------------------------------------
Wed May  2 09:44:29 CEST 2001 - choeger@suse.de

- updated to pl02, bugfixrelease

-------------------------------------------------------------------
Mon Apr 30 11:41:35 CEST 2001 - choeger@suse.de

- Bugfix for SuSEconfig.postfix:
  Handling of TIMEZONE variable if set to unappropriate or no
  value
- Improvement: Warnings are printed out in bold

-------------------------------------------------------------------
Tue Apr 17 16:28:41 CEST 2001 - kukuk@suse.de

- Don't use a RPM macro for version number

-------------------------------------------------------------------
Fri Mar 30 10:08:15 CEST 2001 - choeger@suse.de

- update to pl01, bugfixrelease

-------------------------------------------------------------------
Tue Mar 27 13:16:45 CEST 2001 - choeger@suse.de

- added libcrack to chroot jail, because
  it is needed by pam_pwcheck

-------------------------------------------------------------------
Thu Mar 15 01:08:35 CET 2001 - ro@suse.de

- fixed neededforbuild for openldap

-------------------------------------------------------------------
Mon Mar  5 11:49:48 CET 2001 - choeger@suse.de

- first non-beta of the next postfix generation
- v20010228

-------------------------------------------------------------------
Tue Feb 27 11:22:24 CET 2001 - ro@suse.de

- added cyrus-sasl-devel to neededforbuild

-------------------------------------------------------------------
Tue Feb 27 09:51:56 CET 2001 - choeger@suse.de

- new version, 20010225
- removed notification message

-------------------------------------------------------------------
Tue Feb 20 14:16:30 CET 2001 - choeger@suse.de

- bugfix: wrong permissions for maildrop directory

-------------------------------------------------------------------
Wed Jan 31 10:53:04 CET 2001 - choeger@suse.de

- update to version 20010128
- now linked against ldaplib2

-------------------------------------------------------------------
Fri Jan  5 14:25:11 CET 2001 - choeger@suse.de

- bugfix: maildrop must be owned by postfix.root

-------------------------------------------------------------------
Mon Dec 18 14:47:53 CET 2000 - choeger@suse.de

- update to version 20001212
- bugfix: insserv
- bugfix: missed openssl in neededforbuilt
- renamed to postfix, because a non-crypto version
  is no longer needed

-------------------------------------------------------------------
Wed Dec 13 15:52:43 CET 2000 - choeger@suse.de

- Bugfix: postfix-script was not executable

-------------------------------------------------------------------
Tue Dec 12 15:13:40 CET 2000 - choeger@suse.de

- Bugfixes:
  Provides in initscript
  Use /bin/bash in SuSEconfig.postfix
- Update to version 20001210

-------------------------------------------------------------------
Thu Nov 30 08:35:09 CET 2000 - ro@suse.de

- startscript sbin -> etc

-------------------------------------------------------------------
Thu Nov 23 09:55:37 CET 2000 - choeger@suse.de

- new version
- fix for neededforbuild
- fix for master.cf

-------------------------------------------------------------------
Wed Nov 22 13:06:54 CET 2000 - choeger@suse.de

- adopted to new init scheme

-------------------------------------------------------------------
Wed Nov 15 16:13:12 CET 2000 - choeger@suse.de

- fixed neededforbuild

-------------------------------------------------------------------
Tue Nov 14 15:19:40 CET 2000 - choeger@suse.de

- update to version 20001030

-------------------------------------------------------------------
Thu Nov  9 17:14:48 CET 2000 - choeger@suse.de

- long packagename
- added rpm buildroot

-------------------------------------------------------------------
Wed Nov  8 15:59:41 CET 2000 - uli@suse.de

- fixed neededforbuild

-------------------------------------------------------------------
Fri Nov  3 18:12:57 CET 2000 - bk@suse.de

- src/util/dict_ldap.c:dict_ldap_lookup(): fix missing **-termination.

-------------------------------------------------------------------
Tue Oct 24 17:28:06 CEST 2000 - fober@suse.de

- s390,ppc: added -fsigned-char compiler option, to fix obscure segfaults.
  (code is not signed/unsigned-char-clean)

-------------------------------------------------------------------
Thu Oct 12 18:24:54 CEST 2000 - choeger@suse.de

- yet another SuSEconfig.postfix bug (incorrect link)

-------------------------------------------------------------------
Wed Oct 11 16:47:35 CEST 2000 - choeger@suse.de

- bugfix for SuSEconfig.postfix

-------------------------------------------------------------------
Mon Oct  9 13:54:13 CEST 2000 - choeger@suse.de

- bugfix: missed to install new flush service

-------------------------------------------------------------------
Mon Oct  9 11:48:39 CEST 2000 - choeger@suse.de

- inititial revision of pfixtls

Places

File postfix.changes of Package postfix (Revision b3991f7e70c5fc1afae8f02d4aad256c)

Places