File update_git.sh of Package qemu
#!/bin/bash
#POKEALL used to document where ALL repos are POKED
#POKEALL? question what repos are actually poked here
#TEMP_CHECK - try to eliminate
# !! FIX AFTER RUN - LEAVING REPO NOT IN GOOD STATE
# update_git.sh: script to manage package maintenance using a git-based
# workflow. Commands are as follows:
# git2pkg (update package spec file and patches from git)
# pkg2git (update git (frombundle branch) from the package "bundleofbundles")
# refresh (refresh spec file from spec file template and "bundlofbundles")
#
# (default is git2pkg)
# TODO NOTES:
# after ensuring current status of local repo is clean, incl submodules, we checkout master+submodules, then also ensure they're clean, then checkout the commit or tag corresponding to latest / stable-release + submodules (but don't bother to verift that's clean) - so this is a detached HEAD for stable-release and IS master (almost certainly) for LATEST. WOW - is that what we need to be doing!?!?! At least it seems to be working for the cases I've seen!!!!
# initbundle operates from the current checked out state of the local superproject, to get the submodule ids - CORRECT!!!!
# the LATEST processing of cloning the local repo, clones master - but perhaps it doesn't matter? because it adds upstream as a remote and probably gets most things from there? INVESTIGATE!!!!!!!!!!!!!!!!!!!1
# bundle2local checks out master in local repo to ensure we're off the frombundle branch (doesn't seem needed the way the script currently is). It fetches the bundle's head (FETCH_HEAD) REQUIRING that the base commit be present (which it seems to be. Then it creates the frombundle branch, with the current FETCH_HEAD (SAME AS IN BUNDLE, RIGHT?)
# The LATEST's rebase loop checks out the frombundle branch (with force), so we are now OFF of the "correct checkout" that happened at the beginning, it DELETES the GIT_BRANCH (so in this case it DIDN'T MATTER WHAT WAS THERE WHEN SCRIPT STARTED !!!!!!! WARNING !!!!!, branches off of the frombundle branch (w/checkout), then rebases that (which came from bundle) onto the current superproject, or submodule commit id.
# At this point, if the GIT_BRANCH rebased ok, it's ready for making a patchqueue, out of, if the rebase failed, it's time to manually fix that.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
# LATEST processing implies updated upstream/master IS the right thing
# HOW do we protect against a bad bundle being created (we do have the build service's tracking of previous files - is that sufficient?
# initbundle - what does it need? Currently we take the default branch in local superproject for the superproject and submodule commit ids, so it needs to be right! (ie which ever branch it is (DECIDE!), make it the RIGHT ONE for this release. It takes the commits from the $GIT_BUNDLE branch of each of superproject and submodule repos, which are beyond above found commits. IT CERTIANLY SEEMS REASONABLE THAT WE WOULD HAVE THE $$GIT_BRANCH BRANCH BE THE DEFAULT AND CORRECT BUT HOW DO WE GUARANTEE THATS OK? GIVEN OUR REQS HERE QEMU_VERSION CAN BE GRABBED HERE IN LOCAL SUPERPROJECT RIGHT AWAY!
# bundle2local - what does it need? This checks out local master just to get off of frombundle (could have been $GIT_BRANCH as well) No other req's
# bundle2spec - what does it need? THIS SHOULD HAVE LATEST SPLIT OUT!!!! We allow this alone, so see what setup it alone needs - for this one particularly, we don't want to REQUIRE local repo. FOR NOW I ASSUME THE RIGHT THING IS CHECKED OUT!
#
# SEEMS WE SHOULD NOT,NOT,NOT require user to have previously updated, or set local repo a certain way, but for us to enforce it or actually do it
# TODO: confirm local repo present, correct remotes, correct local branches, somehow validate local branch content against remote, ...
#
# In both cases we DO require the $GIT_BRANCH to exist, and should confirm that the appropriate upstream basis commit is indeed part of that. In the LATEST case, we can treat master as a source for initial current upstream.
set -e
source ./config.sh
declare -A COMMIT_IDS_BY_SUBMODULE_PATH
# Get version info from the packages' tarball - decode and do some checks
BASE_RE="qemu-[[:digit:]]+(\.[[:digit:]]+){2}(-rc[[:digit:]])?"
EXTRA_RE="\+git\.[[:digit:]]+\.([[:xdigit:]]+)"
SUFFIX_RE="\.tar\.xz"
SIG_SUFFIX_RE="\.tar\.xz\.sig"
QEMU_TARBALL=($(find -maxdepth 1 -type f -regextype posix-extended -regex \
"\./$BASE_RE($EXTRA_RE)?$SUFFIX_RE" -printf "%f "))
QEMU_TARBALL_SIG=($(find -maxdepth 1 -type f -regextype posix-extended -regex \
"\./$BASE_RE($EXTRA_RE)?$SIG_SUFFIX_RE" -printf "%f "))
if [ ${#QEMU_TARBALL[@]} -gt 1 ]; then
echo "Multiple qemu tarballs detected. Please clean up"
exit
fi
if [ ${#QEMU_TARBALL_SIG[@]} -gt 1 ]; then
echo "Multiple qemu tarballs signature files detected. Please clean up"
exit
fi
OLD_SOURCE_VERSION_AND_EXTRA=$(echo $QEMU_TARBALL 2>/dev/null | head --bytes=-8\
| cut --bytes=6-)
VERSION_EXTRA=$(echo $OLD_SOURCE_VERSION_AND_EXTRA|awk -F+ '{if ($2) print \
"+"$2}')
if [ "$OLD_SOURCE_VERSION_AND_EXTRA" = "" ]; then
echo "ERROR: No tarball found!"
exit
fi
#==============================================================================
TEMP_CHECK() {
# Validate that all the local repos that we currently have patches in are available
# TEMPORARY REQUIREMENT!
for entry in ${REQUIRED_LOCAL_REPO_MAP[@]}; do
if [[ -e $(readlink -f ${entry}) ]]; then
if $(git -C $entry branch| grep -F "$GIT_BRANCH" >/dev/null); then
:
else
echo "Didn't find the $GIT_BRANCH branch in repo at $entry"
exit
fi
else
echo "ERROR! For now, you need to have these local git repos available:"
echo ${REQUIRED_LOCAL_REPO_MAP[@]}
exit
fi
done
}
#==============================================================================
initbundle() {
# The bundle tarball has git bundles stored in a directory structure which mimics the
# submodule locations in the containing git repo. Also at that same dir level
# is a file named repo which contains the one line git repo url (with git:// or
# http(s) prefix). The bundles are named as follows:
# "{path/}{git_sha}.{bundle}", where {path/} isn't present for
# the top (qemu) bundle (ie it's for submodules).
SUBMODULE_COMMIT_IDS=($(git -C ${LOCAL_REPO_MAP[0]} submodule status --recursive|awk '{print $1}'))
SUBMODULE_DIRS=($(git -C ${LOCAL_REPO_MAP[0]} submodule status --recursive|awk '{print $2}'))
SUBMODULE_COUNT=${#SUBMODULE_COMMIT_IDS[@]}
# TODO: do this with simply math - ie: use (( ... ))
if [[ "$REPO_COUNT" != "$(expr $SUBMODULE_COUNT + 1)" ]]; then
echo "ERROR: submodule count doesn't match the REPO_COUNT variable in config.sh file!"
exit
fi
rm -rf $GIT_DIR
rm -rf $BUNDLE_DIR
mkdir -p $BUNDLE_DIR
for (( i=0; i <$SUBMODULE_COUNT; i++ )); do
mkdir -p $BUNDLE_DIR/${SUBMODULE_DIRS[$i]}
# what should this file be? for now use an extension of id
touch $BUNDLE_DIR/${SUBMODULE_DIRS[$i]}/${SUBMODULE_COMMIT_IDS[$i]}.id
done
if [ "$GIT_UPSTREAM_COMMIT_ISH" = "LATEST" ]; then
GIT_UPSTREAM_COMMIT=$NEW_COMMIT_ISH_FULL
else
# TODO: make this smarter, or change something - works for tag, but not normal commit?
GIT_UPSTREAM_COMMIT=$(git -C ${LOCAL_REPO_MAP[0]} show-ref -d $GIT_UPSTREAM_COMMIT_ISH|grep -F "^{}"|awk '{print $1}')
fi
touch $BUNDLE_DIR/$GIT_UPSTREAM_COMMIT.id
# Now go through all the submodule local repos that are present and create a bundle file for the patches found there
for (( i=0; i <$REPO_COUNT; i++ )); do
#POKEALL (conditional on whether it IS there)
if [[ -e $(readlink -f ${LOCAL_REPO_MAP[$i]}) ]]; then
SUBDIR=${PATCH_PATH_MAP[$i]}
GITREPO_COMMIT_ISH=($BUNDLE_DIR/$SUBDIR*.id)
if [[ $GITREPO_COMMIT_ISH =~ .*(.{40})[.]id ]]; then
GITREPO_COMMIT_ISH=${BASH_REMATCH[1]}
echo "Using $GITREPO_COMMIT_ISH"
mkdir -p $GIT_DIR/$SUBDIR
git -C $GIT_DIR/$SUBDIR init
#POKEALL
git -C $GIT_DIR/$SUBDIR remote add origin file://$(readlink -f \
${LOCAL_REPO_MAP[$i]})
if [[ $(git -C $GIT_DIR/$SUBDIR ls-remote --heads origin $GIT_BRANCH) ]]; then
git -C $GIT_DIR/$SUBDIR fetch origin $GIT_BRANCH
if [[ $(git -C $GIT_DIR/$SUBDIR rev-list $GITREPO_COMMIT_ISH..FETCH_HEAD) ]]; then
git -C $GIT_DIR/$SUBDIR bundle create $BUNDLE_DIR/$SUBDIR$GITREPO_COMMIT_ISH.bundle $GITREPO_COMMIT_ISH..FETCH_HEAD
#TODO: post-process repo info to avoid un-needed diffs (eg git vs https)
#POKEALL
git -C $(readlink -f ${LOCAL_REPO_MAP[$i]}) remote get-url origin >$BUNDLE_DIR/$SUBDIR/repo
fi
fi
fi
fi
done
# keep diffs to a minimum - touch bundle files to "something common"
tar --format gnu --xz \
--numeric-owner \
--owner=0 \
--group=0 \
--mtime="@$(date -r qemu-$SOURCE_VERSION$VERSION_EXTRA.tar.xz +%s)" \
--create \
-f bundles.tar.xz -C $BUNDLE_DIR .
rm -rf $BUNDLE_DIR
rm -rf $GIT_DIR
}
#==============================================================================
bundle2local() {
rm -rf $BUNDLE_DIR
mkdir -p $BUNDLE_DIR
tar xJf bundles.tar.xz -C $BUNDLE_DIR
BUNDLE_FILES=$(find $BUNDLE_DIR -printf "%P\n"|grep "bundle$")
for entry in ${BUNDLE_FILES[@]}; do
if [[ $entry =~ ^(.*)[/]*([a-f0-9]{40})[.]bundle$ ]]; then
SUBDIR=${BASH_REMATCH[1]}
GITREPO_COMMIT_ISH=${BASH_REMATCH[2]}
else
echo "ERROR! BAD BUNDLE CONTENT!"
exit
fi
for (( i=0; i <$REPO_COUNT; i++ )); do
if [[ "$SUBDIR" = "${PATCH_PATH_MAP[$i]}" ]]; then
break
fi
done
#POKEALL ?
LOCAL_REPO=$(readlink -f ${LOCAL_REPO_MAP[$i]})
if [ -e $LOCAL_REPO ]; then
git -C $LOCAL_REPO remote remove bundlerepo || true
# git won't let you delete a branch we're on - so get onto master temporarily (TODO: is there a better approach?)
git -C $LOCAL_REPO checkout master -f
git -C $LOCAL_REPO branch -D frombundle || true
git -C $LOCAL_REPO remote add bundlerepo $BUNDLE_DIR/$entry
git -C $LOCAL_REPO fetch bundlerepo FETCH_HEAD
git -C $LOCAL_REPO branch frombundle FETCH_HEAD
git -C $LOCAL_REPO remote remove bundlerepo
else
echo "No local repo $LOCAL_REPO corresponding to archived git bundle!"
exit
fi
done
rm -rf $BUNDLE_DIR
}
#==============================================================================
redo_tarball_and_rebase_patches() {
rm -rf $GIT_DIR
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# CREATE TARBALL, USING FRESH REPO - WE COULD RELY MORE ON LOCAL IF WE WERE MORE CAREFUL
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# TODO: WHAT IS THIS NEXT LINE EVEN DOING FOR US?? (OK, it's initing a repo, what do we rely on there?)
git clone -ls ${LOCAL_REPO_MAP[0]} $GIT_DIR -b master --single-branch &>/dev/null
echo "Please wait..."
(cd $GIT_DIR && git remote add upstream \
git://git.qemu-project.org/qemu.git &>/dev/null)
(cd $GIT_DIR && git remote update upstream &>/dev/null)
(cd $GIT_DIR && git checkout $NEW_COMMIT_ISH &>/dev/null)
# As an alternative, we could add a --recurse-submodules to the checkout instead here as well, right?
#UPSTREAM DOESNT DO THIS (time takes 17 minutes!):
# (cd $GIT_DIR && git submodule update --init --recursive &>/dev/null)
#INSTEAD THESE NEXT TWO LINES ARE WHAT IS DONE (these take 9 minutes and 3 minutes respectively):
(cd $GIT_DIR && git submodule update --init &>/dev/null)
(cd $GIT_DIR/roms/edk2 && git submodule update --init &>/dev/null)
VERSION_EXTRA=+git.$NOW_SECONDS.$NEW_COMMIT_ISH
if (cd ${LOCAL_REPO_MAP[0]} && git describe --exact-match $NEW_COMMIT_ISH \
&>/dev/null); then
if [ "$X" = "50" ]; then
echo "Ignoring non-standard tag"
else
# there is no VERSION_EXTRA
VERSION_EXTRA=
fi
fi
(cd $GIT_DIR/roms/seabios && git describe --tags --long --dirty > \
.version)
(cd $GIT_DIR/roms/skiboot && ./make_version.sh > .version)
echo "Almost there..."
tar --exclude=.git --transform "s,$GIT_DIR,qemu-$SOURCE_VERSION," \
-Pcf qemu-$SOURCE_VERSION$VERSION_EXTRA.tar $GIT_DIR
osc rm --force qemu-$OLD_SOURCE_VERSION_AND_EXTRA.tar.xz &>/dev/null ||\
true
osc rm --force qemu-$OLD_SOURCE_VERSION_AND_EXTRA.tar.xz.sig \
&>/dev/null || true
unset QEMU_TARBALL_SIG
xz -T 0 qemu-$SOURCE_VERSION$VERSION_EXTRA.tar
osc add qemu-$SOURCE_VERSION$VERSION_EXTRA.tar.xz
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# GET THE SUBMODULE COMMIT ID'S FROM THIS NEWLY MINTED QEMU CHECKOUT. WE'LL USE THAT WHEN WE REBASE OUR PATCHES
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# !! We (perhaps temporarily) do MORE recursive submodules, since we are tracking ALL in these scripts, while upstream doesn't include all in tarball currently
(cd $GIT_DIR && git submodule update --init --recursive &>/dev/null)
SUBMODULE_COMMIT_IDS=($(git -C $GIT_DIR submodule status --recursive|awk '{print $1}'))
SUBMODULE_DIRS=($(git -C $GIT_DIR submodule status --recursive|awk '{print $2}'))
SUBMODULE_COUNT=${#SUBMODULE_COMMIT_IDS[@]}
# TODO: do this with simply math - ie: use (( ... ))
if [[ "$REPO_COUNT" != "$(expr $SUBMODULE_COUNT + 1)" ]]; then
echo "ERROR: submodule count doesn't match the REPO_COUNT variable in config.sh file!"
exit
fi
# We have the submodule commits, but not in the PATCH ORDER which our config.sh has (see $PATCH_PATH_MAP)
for (( i=0; i <$REPO_COUNT-1; i++ )); do
COMMIT_IDS_BY_SUBMODULE_PATH[${SUBMODULE_DIRS[$i]}/]=${SUBMODULE_COMMIT_IDS[$i]}
done
COMMIT_IDS_BY_SUBMODULE_PATH[SUPERPROJECT]=$NEW_COMMIT_ISH_FULL
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# MOVE BUNDLE COMMITS OVER TO LOCAL frombundle BRANCH
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
bundle2local
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# REBASE frombundle patches USING COMMIT_IDS_BY_SUBMODULE, ALSO USING OLD ID'S STORED IN OLD BUNDLE
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
mkdir -p $BUNDLE_DIR
tar xJf bundles.tar.xz -C $BUNDLE_DIR
# Now go through all the submodule local repos that are present and create a bundle file for the patches found there
for (( i=0; i <$REPO_COUNT; i++ )); do
#POKEALL
if [[ -e $(readlink -f ${LOCAL_REPO_MAP[$i]}) ]]; then
if $(git -C ${LOCAL_REPO_MAP[$i]} branch | grep -F "frombundle" >/dev/null); then
SUBDIR=${PATCH_PATH_MAP[$i]}
GITREPO_COMMIT_ISH=($BUNDLE_DIR/$SUBDIR*.id)
if [[ $GITREPO_COMMIT_ISH =~ .*(.{40})[.]id ]]; then
GITREPO_COMMIT_ISH=${BASH_REMATCH[1]}
fi
git -C ${LOCAL_REPO_MAP[$i]} checkout frombundle -f
git -C ${LOCAL_REPO_MAP[$i]} branch -D $GIT_BRANCH
git -C ${LOCAL_REPO_MAP[$i]} checkout -b $GIT_BRANCH
if [[ "$SUBDIR" = "" ]]; then
SUBDIR=SUPERPROJECT
fi
if ! $(git -C ${LOCAL_REPO_MAP[$i]} rebase --onto ${COMMIT_IDS_BY_SUBMODULE_PATH[$SUBDIR]} $GITREPO_COMMIT_ISH >/dev/null); then
# TODO: record that this one needs manual help!
echo "Rebase of ${LOCAL_REPO_MAP[$i]}, branch $GIT_BRANCH needs manual help"
REBASE_FAILS="${LOCAL_REPO_MAP[$i]} $REBASE_FAILS"
fi
fi
fi
done
}
#==============================================================================
bundle2spec() {
rm -f checkpatch.log
rm -f checkthese
rm -rf checkdir
rm -rf $GIT_DIR
rm -rf $CMP_DIR
rm -rf $BUNDLE_DIR
mkdir -p $BUNDLE_DIR
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# NOW PROCESS BUNDLES INTO COMMITS AND FILL SPEC FILE
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
tar xJf bundles.tar.xz -C $BUNDLE_DIR
BUNDLE_FILES=$(find $BUNDLE_DIR -printf "%P\n"|grep "bundle$")
for entry in ${BUNDLE_FILES[@]}; do
if [[ $entry =~ ^(.*)[/]*([a-f0-9]{40})[.]bundle$ ]]; then
SUBDIR=${BASH_REMATCH[1]}
GITREPO_COMMIT_ISH=${BASH_REMATCH[2]}
else
echo "ERROR! BAD BUNDLE CONTENT!"
exit
fi
for (( i=0; i <$REPO_COUNT; i++ )); do
if [[ "$SUBDIR" = "${PATCH_PATH_MAP[$i]}" ]]; then
break
fi
done
if [[ $i = $REPO_COUNT ]]; then
echo "Error matching bundle dir to project submodule path"
exit
fi
mkdir -p $GIT_DIR/$SUBDIR
git -C $GIT_DIR/$SUBDIR init
#POKEALL?
git -C $GIT_DIR/$SUBDIR remote add origin file://$(readlink -f \
${LOCAL_REPO_MAP[$i]})
git -C $GIT_DIR/$SUBDIR fetch origin $GIT_BRANCH
git -C $GIT_DIR/$SUBDIR reset --hard $GITREPO_COMMIT_ISH
git -C $GIT_DIR/$SUBDIR remote add bundle $BUNDLE_DIR/$entry
git -C $GIT_DIR/$SUBDIR fetch bundle FETCH_HEAD
git -C $GIT_DIR/$SUBDIR format-patch -N --suffix= --no-renames -o $CMP_DIR -k --stat=72 \
--indent-heuristic --zero-commit --no-signature --full-index \
--src-prefix=a/$SUBDIR --dst-prefix=b/$SUBDIR \
--start-number=$(expr $i \* $PATCH_RANGE) \
$GITREPO_COMMIT_ISH..FETCH_HEAD > /dev/null
done
rm -rf $GIT_DIR
rm -rf $BUNDLE_DIR
(
CHANGED_COUNT=0
UNCHANGED_COUNT=0
DELETED_COUNT=0
ADDED_COUNT=0
TOTAL_COUNT=0
shopt -s nullglob
for i in $CMP_DIR/*; do
# index line isn't consistent, so cut full index to normal line length
sed -E -i 's/(^index [a-f0-9]{28})[a-f0-9]{12}([.][.][a-f0-9]{28})[a-f0-9]{12}( [0-9]{6}$)/\1\2\3/' $i
BASENAME=$(basename $i)
if [ "$FIVE_DIGIT_POTENTIAL" = "1" ]; then
if [[ $BASENAME =~ [[:digit:]]{5}.* ]]; then
:
else
BASENAME=0$BASENAME
fi
fi
if [[ "$NUMBERED_PATCHES" = "0" ]]; then
KEEP_COUNT=40+4+$FIVE_DIGIT_POTENTIAL+1
else
KEEP_COUNT=40
fi
tail -n +2 $i > $CMP_DIR/${BASENAME:0:$KEEP_COUNT}.patch
rm $i
done
if [[ "$NUMBERED_PATCHES" = "0" ]]; then
for i in [0-9]*.patch; do
osc rm --force $i
done
# make sure that w/out the numbered prefixes, the patchnames are all unique
mkdir checkdir
for i in $CMP_DIR/*; do
BASENAME=$(basename $i)
FINALNAME=${BASENAME:4+$FIVE_DIGIT_POTENTIAL+1:40+1+5}
if [[ -e checkdir/$FINALNAME ]]; then
echo "ERROR! Patch name $FINALNAME is not unique! Please modify patch subject to achieve uniqueness"
exit 1
fi
cp $i checkdir/$FINALNAME
done
CHECK_DIR=checkdir
cp $CMP_DIR/*.patch .
else
CHECK_DIR=$CMP_DIR
fi
if [ "$FIVE_DIGIT_POTENTIAL" = "0" ]; then
CHECK_PREFIX="0"
else
CHECK_PREFIX="00"
fi
for i in $CHECK_DIR/*; do
BASENAME=$(basename $i)
if [ -e $BASENAME ]; then
if cmp -s $i $BASENAME; then
touch --reference=$BASENAME $i
rm $BASENAME
let UNCHANGED_COUNT+=1
else
if [ "${BASENAME:0:1+$FIVE_DIGIT_POTENTIAL}" = "$CHECK_PREFIX" ]; then
echo "$BASENAME" >> checkthese
fi
rm $BASENAME
let CHANGED_COUNT+=1
let TOTAL_COUNT+=1
fi
else
echo " $BASENAME" >> qemu.changes.added
if [ "${BASENAME:0:1+$FIVE_DIGIT_POTENTIAL}" = "$CHECK_PREFIX" ]; then
echo "$BASENAME" >> checkthese
fi
let ADDED_COUNT+=1
let TOTAL_COUNT+=1
fi
done
if [ "$FIVE_DIGIT_POTENTIAL" = "0" ]; then
NUMBERED_PATCH_RE="^[[:digit:]]{4}-.*[.]patch$"
else
NUMBERED_PATCH_RE="^[[:digit:]]{5}-.*[.]patch$"
fi
for i in *.patch; do
if [[ $i =~ $NUMBERED_PATCH_RE ]]; then
if [[ "$NUMBERED_PATCHES" = "1" ]]; then
osc rm --force $i
echo " $i" >> qemu.changes.deleted
let DELETED_COUNT+=1
let TOTAL_COUNT+=1
fi
else
osc rm --force $i
echo " $i" >> qemu.changes.deleted
let DELETED_COUNT+=1
let TOTAL_COUNT+=1
fi
done
mv $CHECK_DIR/* .
if [ -e qemu.changes.added ]; then
xargs osc add < qemu.changes.added
fi
if [[ -e checkthese ]]; then
tar Jxf qemu-$SOURCE_VERSION$VERSION_EXTRA.tar.xz \
qemu-$SOURCE_VERSION/scripts/checkpatch.pl --strip-components=2
for i in $(cat checkthese); do
./checkpatch.pl --no-tree --terse --no-summary --summary-file \
--patch $i >> checkpatch.log || true
done
fi
rm -f checkthese
rm -f checkpatch.pl
if [ -s checkpatch.log ]; then
echo "WARNING: Issues reported by qemu patch checker. Please handle" \
"ERROR items now:"
cat checkpatch.log
fi
rm -f checkpatch.log
if [ "$TOTAL_COUNT" != "0" -a "$VERSION_EXTRA" != "" -a "$OLD_COMMIT_ISH" =\
"$NEW_COMMIT_ISH" ]; then
# Only patches changed: update the version using current timestamp
VERSION_EXTRA=+git.$NOW_SECONDS.$OLD_COMMIT_ISH
osc mv qemu-$OLD_SOURCE_VERSION_AND_EXTRA.tar.xz \
qemu-$SOURCE_VERSION$VERSION_EXTRA.tar.xz
osc add qemu-$SOURCE_VERSION$VERSION_EXTRA.tar.xz
fi
echo "QEMU version file: $QEMU_VERSION"
echo "QEMU source version: $SOURCE_VERSION"
echo "QEMU version extra: $VERSION_EXTRA"
SEABIOS_VERSION=${SEABIOS_VERSION:-$(tar JxfO qemu-$SOURCE_VERSION$VERSION_EXTRA.tar.xz \
qemu-$SOURCE_VERSION/roms/seabios/.version | cut -d '-' -f 2)}
for package in qemu; do
while IFS= read -r line; do
if [ "$line" = "PATCH_FILES" ]; then
for i in [0-9]*-*.patch; do
NUM=${i%%-*}
DIV=$((10#$NUM/$PATCH_RANGE))
REM=$((10#$NUM%$PATCH_RANGE))
if [[ "$REM" = "0" ]]; then
if [[ "$DIV" = "0" ]]; then
echo "# Patches applied in base project:"
else
echo "# Patches applied in ${PATCH_PATH_MAP[$DIV]}:"
fi
fi
if [[ "$FIVE_DIGIT_POTENTIAL" != "0" ]]; then
if [[ "$NUMBERED_PATCHES" = "0" ]]; then
PATCH_NUMBER=${i%%-*}
echo -e "Patch$NUM: ${i:${#PATCH_NUMBER}+1:40+1+5}"
else
echo -e "Patch$NUM: $i"
fi
else
if [[ "$NUMBERED_PATCHES" = "0" ]]; then
PATCH_NUMBER=${i%%-*}
echo -e "Patch$NUM: ${i:${#PATCH_NUMBER}+1:40+1+5}"
else
echo -e "Patch$NUM: $i"
fi
fi
done
elif [ "$line" = "PATCH_EXEC" ]; then
for i in [0-9]*-*.patch; do
S=$(grep "^Include-If: " $i) || true
NUM=${i%%-*}
if [ "$S" != "" ]; then
echo "${S:12}"
echo "%patch$NUM -p1"
echo "%endif"
else
echo "%patch$NUM -p1"
fi
done
elif [ "$line" = "INSERT_VERSIONING" ]; then
echo "%define qemuver $QEMU_VERSION$VERSION_EXTRA"
echo "%define srcver $SOURCE_VERSION$VERSION_EXTRA"
echo "%define sbver $SEABIOS_VERSION"
elif [[ "$line" =~ ^Source: ]]; then
echo "$line"
if [ ${#QEMU_TARBALL_SIG[@]} -eq 1 ]; then
# We assume the signature file corresponds - just add .sig
echo "$line.sig"|sed 's/^Source: /Source99:/'
fi
else
echo "$line"
fi
done < $package.spec.in > $CMP_DIR/$package.spec
if cmp -s $package.spec $CMP_DIR/$package.spec; then
echo "$package.spec unchanged"
else
mv $CMP_DIR/$package.spec $package.spec
echo "$package.spec regenerated"
let PACKAGE_CHANGED_COUNT+=1
fi
if [ "$WRITE_LOG" = "1" ]; then
# Factory requires all deleted and added patches to be mentioned
if [ -e qemu.changes.deleted ] || [ -e qemu.changes.added ]; then
echo "Patch queue updated from ${GIT_TREE} ${GIT_BRANCH}" > \
$package.changes.proposed
fi
if [ -e qemu.changes.deleted ]; then
echo "* Patches dropped:" >> $package.changes.proposed
cat qemu.changes.deleted >> $package.changes.proposed
fi
if [ -e qemu.changes.added ]; then
echo "* Patches added:" >> $package.changes.proposed
cat qemu.changes.added >> $package.changes.proposed
fi
if [ -e $package.changes.proposed ]; then
osc vc --file=$package.changes.proposed $package
rm -f $package.changes.proposed
fi
fi
done
if [[ "$NUMBERED_PATCHES" = "0" ]]; then
rm -f [0-9]*-*.patch
fi
if [ -e qemu.changes.deleted ]; then
rm -f qemu.changes.deleted
fi
if [ -e qemu.changes.added ]; then
rm -f qemu.changes.added
fi
# Decide if there is a better way to handle the no change case:
if [[ "0" = "$(expr $CHANGED_COUNT + $DELETED_COUNT + $ADDED_COUNT)" ]]; then
osc revert bundles.tar.xz
fi
echo "git patch summary"
echo " unchanged: $UNCHANGED_COUNT"
echo " changed: $CHANGED_COUNT"
echo " deleted: $DELETED_COUNT"
echo " added: $ADDED_COUNT"
)
rm -rf $CMP_DIR
rm -rf checkdir
osc service localrun format_spec_file
}
#==============================================================================
usage() {
echo "Usage:"
echo "bash ./git_update.sh <command>"
echo "description: package maintenance using a git-based workflow. Commands:"
echo " git2pkg (update package spec file and patches from git. Is default)"
echo " pkg2git (update git (frombundle branch) from the package "bundleofbundles")"
echo " refresh (refresh spec file from spec file template and "bundlofbundles")"
echo "(See script for details on doing 'LATEST' workflow)"
}
#==============================================================================
explain_setup() {
echo "Currently we require local git repos at these locations:"
echo "${REQUIRED_LOCAL_REPO_MAP[@]}"
echo "Where each has as it's remote the uri: https://github.com/opensuse/*.git"
echo "and where * is replaced by the qemu-whatever, and the remote is named origin"
echo "and the qemu or qemu submodule repos as remotes named upstream"
}
#==============================================================================
#?? Should we be LATEST or not specific here?
if [[ ! -e $(readlink -f ${LOCAL_REPO_MAP[0]}) ]]; then
echo "ERROR: Main local QEMU related git repo not found. Please follow these setup instructions:"
explain_setup
exit
fi
echo "WARNING: Script using local git repos. Some operations may be time consuming..."
#TODO: Most of these checks are not necessary
for (( i=0; i <$REPO_COUNT; i++ )); do
#POKEALL
if [[ -e $(readlink -f ${LOCAL_REPO_MAP[$i]}) ]]; then
if [[ -d ${LOCAL_REPO_MAP[$i]}/.git/rebase-merge || \
-d ${LOCAL_REPO_MAP[$i]}/.git/rebase-apply ]]; then
echo "ERROR! Rebase appears to be in progress in ${LOCAL_REPO_MAP[$i]}. Please resolve"
exit
fi
if ! git -C ${LOCAL_REPO_MAP[$i]} submodule update --init --recursive &> /dev/null; then
echo "Please clean up state of local repo ${LOCAL_REPO_MAP[$i]} before using script"
echo "(ensure git submodule update --init --recursive is successful)"
exit
fi
if [ "$(git -C ${LOCAL_REPO_MAP[$i]} status --porcelain)" ]; then
echo "Please clean up state of local repo ${LOCAL_REPO_MAP[$i]} before using script"
echo "(ensure git status --porcelain produces no output)"
exit
fi
if ! git -C ${LOCAL_REPO_MAP[$i]} checkout master --recurse-submodules -f &> /dev/null; then
echo "Please clean up state of local repo ${LOCAL_REPO_MAP[$i]} before using script"
echo "(cannot check out master, incl. it's submodules)"
exit
fi
if ! git -C ${LOCAL_REPO_MAP[$i]} submodule update --init --recursive &> /dev/null; then
echo "Please clean up state of local repo ${LOCAL_REPO_MAP[$i]} before using script"
echo "(cannot init and update master submodules)"
exit
fi
if [ "$(git -C ${LOCAL_REPO_MAP[$i]} status --porcelain)" ]; then
echo "Please clean up state of local repo ${LOCAL_REPO_MAP[$i]} before using script"
echo "(ensure git status --porcelain produces no output)"
exit
fi
fi
done
if [ "$GIT_UPSTREAM_COMMIT_ISH" = "LATEST" ]; then
if [ "$1" = "continue" ]; then
CONTINUE_AFTER_REBASE=1
else
if [ "$1" = "pause" ]; then
PAUSE_BEFORE_BUNDLE_CREATION=1
else
if [ "$1" ]; then
echo "ERROR: unrecognized option '$1'. Script in LATEST mode only recognizes 'pause' and 'continue' options"
exit
fi
fi
fi
#POKEALL
for (( i=0; i <$REPO_COUNT; i++ )); do
if [[ -e $(readlink -f ${LOCAL_REPO_MAP[$i]}) ]]; then
git -C ${LOCAL_REPO_MAP[$i]} remote update upstream &> /dev/null
fi
done
NEW_COMMIT_ISH_FULL=$(cd ${LOCAL_REPO_MAP[0]} && git rev-parse upstream/master)
NEW_COMMIT_ISH=${NEW_COMMIT_ISH_FULL:0:8}
git -C ${LOCAL_REPO_MAP[0]} checkout $NEW_COMMIT_ISH_FULL --recurse-submodules -f &> /dev/null
QEMU_VERSION=$(git -C ${LOCAL_REPO_MAP[0]} show upstream/master:VERSION)
MAJOR_VERSION=$(echo $QEMU_VERSION|awk -F. '{print $1}')
MINOR_VERSION=$(echo $QEMU_VERSION|awk -F. '{print $2}')
X=$(echo $QEMU_VERSION|awk -F. '{print $3}')
# 0 = release, 50 = development cycle, 90..99 equate to release candidates
if [ "$X" != "0" -a "$X" != "50" ]; then
if [ "$NEXT_RELEASE_IS_MAJOR" = "0" ]; then
SOURCE_VERSION=$MAJOR_VERSION.$[$MINOR_VERSION+1].0-rc$[X-90]
GIT_BRANCH=opensuse-$MAJOR_VERSION.$[$MINOR_VERSION+1]
else
SOURCE_VERSION=$[$MAJOR_VERSION+1].0.0-rc$[X-90]
GIT_BRANCH=opensuse-$[$MAJOR_VERSION+1].0
fi
else
SOURCE_VERSION=$MAJOR_VERSION.$MINOR_VERSION.$X
if [ "$NEXT_RELEASE_IS_MAJOR" = "0" ]; then
GIT_BRANCH=opensuse-$MAJOR_VERSION.$[$MINOR_VERSION+1]
else
GIT_BRANCH=opensuse-$[MAJOR_VERSION+1].0
fi
fi
WRITE_LOG=0
echo "Processing LATEST upstream changes"
echo "(If SUCCESS is not printed upon completion, see /tmp/latest.log for issues)"
TEMP_CHECK # DOING LATEST
if [[ $QEMU_TARBALL =~ $BASE_RE$EXTRA_RE$SUFFIX_RE ]]; then
OLD_COMMIT_ISH=${BASH_REMATCH[3]}
else
#Assume release (or release candidate) tarball with equivalent tag:
OLD_COMMIT_ISH=$(cd ${LOCAL_REPO_MAP[0]} && git rev-list --abbrev-commit \
--abbrev=8 -1 v$OLD_SOURCE_VERSION_AND_EXTRA)
fi
if [ ${#QEMU_TARBALL_SIG[@]} -ne 0 ]; then
echo "INFO: Ignoring signature file: $QEMU_TARBALL_SIG"
QEMU_TARBALL_SIG=
fi
NOW_SECONDS=$(date +%s)
if [ "$OLD_COMMIT_ISH" != "$NEW_COMMIT_ISH" ]; then
if [ "$CONTINUE_AFTER_REBASE" = "1" ]; then
echo "continue after rebase selected but tarball is out of date. Continuing not possible."
echo "If desired, save your rebase work (eg, branch $GIT_BRANCH), because otherwise it will"
echo "be lost. Then run script again without the continue option"
exit
fi
redo_tarball_and_rebase_patches &> /tmp/latest.log
if [[ "$REBASE_FAILS" ]]; then
echo "ERROR! Rebase of the $GIT_BRANCH branch failed in the following local git repos:"
echo $REBASE_FAILS
echo "Manually resolve all these rebases, then finish the workflow by passing 'continue' to script"
if [[ "$PAUSE_BEFORE_BUNDLE_CREATION" = "1" ]]; then
echo "Feel free to also do the work now occasioned by the selected 'pause' option"
fi
exit
fi
CONTINUE_AFTER_REBASE=1
fi
if [[ "$PAUSE_BEFORE_BUNDLE_CREATION" = "1" ]]; then
echo "As requested, pausing before re-creating bundle of bundles for additional patch or specfile work"
echo "(using current 'ready to go' $GIT_BRANCH branch of local repos to produce patches.)"
echo "When changes are complete, finish the workflow by passing 'continue' to script"
exit
fi
if [ "$CONTINUE_AFTER_REBASE" = "1" ]; then
initbundle &>> /tmp/latest.log
fi
bundle2spec &>> /tmp/latest.log
echo "SUCCESS"
tail -9 /tmp/latest.log
else # not LATEST
if [ ! "$GIT_UPSTREAM_COMMIT_ISH" = "v$OLD_SOURCE_VERSION_AND_EXTRA" ]; then
echo "Tarball name (which we decode) doesn't correspond to the \$GIT_UPSTREAM_COMMIT_ISH in config.sh"
exit
fi
git -C ${LOCAL_REPO_MAP[0]} checkout $GIT_UPSTREAM_COMMIT_ISH --recurse-submodules -f &> /dev/null
NEW_COMMIT_ISH=
SOURCE_VERSION=$OLD_SOURCE_VERSION_AND_EXTRA
QEMU_VERSION=$(tar JxfO qemu-$SOURCE_VERSION$VERSION_EXTRA.tar.xz qemu-$SOURCE_VERSION/VERSION)
if [ ! "$QEMU_VERSION" = "$OLD_SOURCE_VERSION_AND_EXTRA" ]; then
echo "Tarball name (which we decode) doesn't correspond to the VERSION file contained therein"
exit
fi
MAJOR_VERSION=$(echo $QEMU_VERSION|awk -F. '{print $1}')
MINOR_VERSION=$(echo $QEMU_VERSION|awk -F. '{print $2}')
GIT_BRANCH=opensuse-$MAJOR_VERSION.$MINOR_VERSION
WRITE_LOG=1
if [ "$1" = "" ]; then
set -- git2pkg
fi
case $1 in
initbundle )
initbundle
;;
git2pkg )
echo "Updating the package using the $GIT_BRANCH branch of the local repos."
echo "(If SUCCESS is not printed upon completion, see /tmp/git2pkg.log for issues)"
TEMP_CHECK #NOT LATEST
initbundle &> /tmp/git2pkg.log
bundle2spec &>> /tmp/git2pkg.log
echo "SUCCESS"
tail -9 /tmp/git2pkg.log
;;
pkg2git )
echo "Exporting the package's git bundles to the local repo's frombundle branches..."
echo "(If SUCCESS is not printed upon completion, see /tmp/pkg2git.log for issues)"
TEMP_CHECK #NOT LATEST
bundle2local &> /tmp/pkg2git.log
echo "SUCCESS"
echo "To modify package patches, use the frombundle branch as the basis for updating"
echo "the $GIT_BRANCH branch with the new patch queue."
echo "Then export the changes back to the package using update_git.sh git2pkg"
;;
refresh )
echo "Updating the spec file and patches from the spec file template and the bundle"
echo "of bundles (bundles.tar.xz)"
echo "(If SUCCESS is not printed upon completion, see /tmp/refresh.log for issues)"
TEMP_CHECK #NOT LATEST
bundle2spec &> /tmp/refresh.log
echo "SUCCESS"
tail -9 /tmp/refresh.log
;;
* )
echo "Unknown command"
usage
;;
help )
usage
;;
esac
fi
exit
