File apache2-mod_http2-1.11.0.patch of Package apache2.27541
Index: httpd-2.4.33/modules/http2/h2_from_h1.c
===================================================================
--- httpd-2.4.33.orig/modules/http2/h2_from_h1.c 2018-10-01 16:58:14.911879563 +0200
+++ httpd-2.4.33/modules/http2/h2_from_h1.c 2018-10-01 16:58:14.927879652 +0200
@@ -209,10 +209,18 @@ static h2_headers *create_response(h2_ta
/* determine the protocol and whether we should use keepalives. */
ap_set_keepalive(r);
- if (r->chunked) {
+ if (AP_STATUS_IS_HEADER_ONLY(r->status)) {
+ apr_table_unset(r->headers_out, "Transfer-Encoding");
apr_table_unset(r->headers_out, "Content-Length");
+ r->content_type = r->content_encoding = NULL;
+ r->content_languages = NULL;
+ r->clength = r->chunked = 0;
}
-
+ else if (r->chunked) {
+ apr_table_mergen(r->headers_out, "Transfer-Encoding", "chunked");
+ apr_table_unset(r->headers_out, "Content-Length");
+ }
+
ctype = ap_make_content_type(r, r->content_type);
if (ctype) {
apr_table_setn(r->headers_out, "Content-Type", ctype);
Index: httpd-2.4.33/modules/http2/h2_session.c
===================================================================
--- httpd-2.4.33.orig/modules/http2/h2_session.c 2018-10-01 16:58:14.915879585 +0200
+++ httpd-2.4.33/modules/http2/h2_session.c 2018-10-01 16:58:14.927879652 +0200
@@ -235,6 +235,7 @@ static int on_data_chunk_recv_cb(nghttp2
stream = h2_session_stream_get(session, stream_id);
if (stream) {
status = h2_stream_recv_DATA(stream, flags, data, len);
+ dispatch_event(session, H2_SESSION_EV_STREAM_CHANGE, 0, "stream data rcvd");
}
else {
ap_log_cerror(APLOG_MARK, APLOG_DEBUG, 0, session->c, APLOGNO(03064)
@@ -317,9 +318,9 @@ static int on_header_cb(nghttp2_session
}
/**
- * nghttp2 session has received a complete frame. Most, it uses
- * for processing of internal state. HEADER and DATA frames however
- * we need to handle ourself.
+ * nghttp2 session has received a complete frame. Most are used by nghttp2
+ * for processing of internal state. Some, like HEADER and DATA frames,
+ * we need to act on.
*/
static int on_frame_recv_cb(nghttp2_session *ng2s,
const nghttp2_frame *frame,
@@ -378,6 +379,9 @@ static int on_frame_recv_cb(nghttp2_sess
"h2_stream(%ld-%d): WINDOW_UPDATE incr=%d",
session->id, (int)frame->hd.stream_id,
frame->window_update.window_size_increment);
+ if (nghttp2_session_want_write(session->ngh2)) {
+ dispatch_event(session, H2_SESSION_EV_FRAME_RCVD, 0, "window update");
+ }
break;
case NGHTTP2_RST_STREAM:
ap_log_cerror(APLOG_MARK, APLOG_DEBUG, 0, session->c, APLOGNO(03067)
@@ -404,6 +408,12 @@ static int on_frame_recv_cb(nghttp2_sess
frame->goaway.error_code, NULL);
}
break;
+ case NGHTTP2_SETTINGS:
+ if (APLOGctrace2(session->c)) {
+ ap_log_cerror(APLOG_MARK, APLOG_TRACE2, 0, session->c,
+ H2_SSSN_MSG(session, "SETTINGS, len=%ld"), (long)frame->hd.length);
+ }
+ break;
default:
if (APLOGctrace2(session->c)) {
char buffer[256];
@@ -415,7 +425,40 @@ static int on_frame_recv_cb(nghttp2_sess
}
break;
}
- return (APR_SUCCESS == rv)? 0 : NGHTTP2_ERR_PROTO;
+
+ if (session->state == H2_SESSION_ST_IDLE) {
+ /* We received a frame, but session is in state IDLE. That means the frame
+ * did not really progress any of the (possibly) open streams. It was a meta
+ * frame, e.g. SETTINGS/WINDOW_UPDATE/unknown/etc.
+ * Remember: IDLE means we cannot send because either there are no streams open or
+ * all open streams are blocked on exhausted WINDOWs for outgoing data.
+ * The more frames we receive that do not change this, the less interested we
+ * become in serving this connection. This is expressed in increasing "idle_delays".
+ * Eventually, the connection will timeout and we'll close it. */
+ session->idle_frames = H2MIN(session->idle_frames + 1, session->frames_received);
+ ap_log_cerror( APLOG_MARK, APLOG_TRACE2, 0, session->c,
+ H2_SSSN_MSG(session, "session has %ld idle frames"),
+ (long)session->idle_frames);
+ if (session->idle_frames > 10) {
+ apr_size_t busy_frames = H2MAX(session->frames_received - session->idle_frames, 1);
+ int idle_ratio = (int)(session->idle_frames / busy_frames);
+ if (idle_ratio > 100) {
+ session->idle_delay = apr_time_from_msec(H2MIN(1000, idle_ratio));
+ }
+ else if (idle_ratio > 10) {
+ session->idle_delay = apr_time_from_msec(10);
+ }
+ else if (idle_ratio > 1) {
+ session->idle_delay = apr_time_from_msec(1);
+ }
+ else {
+ session->idle_delay = 0;
+ }
+ }
+ }
+
+ if (APR_SUCCESS != rv) return NGHTTP2_ERR_PROTO;
+ return 0;
}
static int h2_session_continue_data(h2_session *session) {
@@ -1603,23 +1646,57 @@ static void update_child_status(h2_sessi
static void transit(h2_session *session, const char *action, h2_session_state nstate)
{
+ apr_time_t timeout;
+ int ostate, loglvl;
+ const char *s;
+
if (session->state != nstate) {
- int loglvl = APLOG_DEBUG;
- if ((session->state == H2_SESSION_ST_BUSY && nstate == H2_SESSION_ST_WAIT)
- || (session->state == H2_SESSION_ST_WAIT && nstate == H2_SESSION_ST_BUSY)){
+ ostate = session->state;
+ session->state = nstate;
+
+ loglvl = APLOG_DEBUG;
+ if ((ostate == H2_SESSION_ST_BUSY && nstate == H2_SESSION_ST_WAIT)
+ || (ostate == H2_SESSION_ST_WAIT && nstate == H2_SESSION_ST_BUSY)){
loglvl = APLOG_TRACE1;
}
ap_log_cerror(APLOG_MARK, loglvl, 0, session->c,
H2_SSSN_LOG(APLOGNO(03078), session,
"transit [%s] -- %s --> [%s]"),
- h2_session_state_str(session->state), action,
+ h2_session_state_str(ostate), action,
h2_session_state_str(nstate));
- session->state = nstate;
+
switch (session->state) {
case H2_SESSION_ST_IDLE:
- update_child_status(session, (session->open_streams == 0?
- SERVER_BUSY_KEEPALIVE
- : SERVER_BUSY_READ), "idle");
+ if (!session->remote.emitted_count) {
+ /* on fresh connections, with async mpm, do not return
+ * to mpm for a second. This gives the first request a better
+ * chance to arrive (und connection leaving IDLE state).
+ * If we return to mpm right away, this connection has the
+ * same chance of being cleaned up by the mpm as connections
+ * that already served requests - not fair. */
+ session->idle_sync_until = apr_time_now() + apr_time_from_sec(1);
+ s = "timeout";
+ timeout = H2MAX(session->s->timeout, session->s->keep_alive_timeout);
+ update_child_status(session, SERVER_BUSY_READ, "idle");
+ ap_log_cerror(APLOG_MARK, APLOG_TRACE1, 0, session->c,
+ H2_SSSN_LOG("", session, "enter idle, timeout = %d sec"),
+ (int)apr_time_sec(H2MAX(session->s->timeout, session->s->keep_alive_timeout)));
+ }
+ else if (session->open_streams) {
+ s = "timeout";
+ timeout = session->s->keep_alive_timeout;
+ update_child_status(session, SERVER_BUSY_KEEPALIVE, "idle");
+ }
+ else {
+ /* normal keepalive setup */
+ s = "keepalive";
+ timeout = session->s->keep_alive_timeout;
+ update_child_status(session, SERVER_BUSY_KEEPALIVE, "idle");
+ }
+ session->idle_until = apr_time_now() + timeout;
+ ap_log_cerror(APLOG_MARK, APLOG_TRACE1, 0, session->c,
+ H2_SSSN_LOG("", session, "enter idle, %s = %d sec"),
+ s, (int)apr_time_sec(timeout));
break;
case H2_SESSION_ST_DONE:
update_child_status(session, SERVER_CLOSING, "done");
@@ -1726,8 +1803,6 @@ static void h2_session_ev_no_io(h2_sessi
* This means we only wait for WINDOW_UPDATE from the
* client and can block on READ. */
transit(session, "no io (flow wait)", H2_SESSION_ST_IDLE);
- session->idle_until = apr_time_now() + session->s->timeout;
- session->keep_sync_until = session->idle_until;
/* Make sure we have flushed all previously written output
* so that the client will react. */
if (h2_conn_io_flush(&session->io) != APR_SUCCESS) {
@@ -1738,12 +1813,7 @@ static void h2_session_ev_no_io(h2_sessi
}
else if (session->local.accepting) {
/* When we have no streams, but accept new, switch to idle */
- apr_time_t now = apr_time_now();
transit(session, "no io (keepalive)", H2_SESSION_ST_IDLE);
- session->idle_until = (session->remote.emitted_count?
- session->s->keep_alive_timeout :
- session->s->timeout) + now;
- session->keep_sync_until = now + apr_time_from_sec(1);
}
else {
/* We are no longer accepting new streams and there are
@@ -1758,12 +1828,25 @@ static void h2_session_ev_no_io(h2_sessi
}
}
-static void h2_session_ev_data_read(h2_session *session, int arg, const char *msg)
+static void h2_session_ev_frame_rcvd(h2_session *session, int arg, const char *msg)
+{
+ switch (session->state) {
+ case H2_SESSION_ST_IDLE:
+ case H2_SESSION_ST_WAIT:
+ transit(session, "frame received", H2_SESSION_ST_BUSY);
+ break;
+ default:
+ /* nop */
+ break;
+ }
+}
+
+static void h2_session_ev_stream_change(h2_session *session, int arg, const char *msg)
{
switch (session->state) {
case H2_SESSION_ST_IDLE:
case H2_SESSION_ST_WAIT:
- transit(session, "data read", H2_SESSION_ST_BUSY);
+ transit(session, "stream change", H2_SESSION_ST_BUSY);
break;
default:
/* nop */
@@ -1803,16 +1886,6 @@ static void h2_session_ev_pre_close(h2_s
static void ev_stream_open(h2_session *session, h2_stream *stream)
{
h2_iq_append(session->in_process, stream->id);
- switch (session->state) {
- case H2_SESSION_ST_IDLE:
- if (session->open_streams == 1) {
- /* enter timeout, since we have a stream again */
- session->idle_until = (session->s->timeout + apr_time_now());
- }
- break;
- default:
- break;
- }
}
static void ev_stream_closed(h2_session *session, h2_stream *stream)
@@ -1825,11 +1898,6 @@ static void ev_stream_closed(h2_session
}
switch (session->state) {
case H2_SESSION_ST_IDLE:
- if (session->open_streams == 0) {
- /* enter keepalive timeout, since we no longer have streams */
- session->idle_until = (session->s->keep_alive_timeout
- + apr_time_now());
- }
break;
default:
break;
@@ -1887,6 +1955,7 @@ static void on_stream_state_enter(void *
default:
break;
}
+ dispatch_event(session, H2_SESSION_EV_STREAM_CHANGE, 0, "stream state change");
}
static void on_stream_event(void *ctx, h2_stream *stream,
@@ -1945,8 +2014,8 @@ static void dispatch_event(h2_session *s
case H2_SESSION_EV_NO_IO:
h2_session_ev_no_io(session, arg, msg);
break;
- case H2_SESSION_EV_DATA_READ:
- h2_session_ev_data_read(session, arg, msg);
+ case H2_SESSION_EV_FRAME_RCVD:
+ h2_session_ev_frame_rcvd(session, arg, msg);
break;
case H2_SESSION_EV_NGH2_DONE:
h2_session_ev_ngh2_done(session, arg, msg);
@@ -1957,6 +2026,9 @@ static void dispatch_event(h2_session *s
case H2_SESSION_EV_PRE_CLOSE:
h2_session_ev_pre_close(session, arg, msg);
break;
+ case H2_SESSION_EV_STREAM_CHANGE:
+ h2_session_ev_stream_change(session, arg, msg);
+ break;
default:
ap_log_cerror(APLOG_MARK, APLOG_TRACE1, 0, session->c,
H2_SSSN_MSG(session, "unknown event %d"), ev);
@@ -1990,13 +2062,15 @@ apr_status_t h2_session_process(h2_sessi
apr_status_t status = APR_SUCCESS;
conn_rec *c = session->c;
int rv, mpm_state, trace = APLOGctrace3(c);
-
+ apr_time_t now;
+
if (trace) {
ap_log_cerror( APLOG_MARK, APLOG_TRACE3, status, c,
H2_SSSN_MSG(session, "process start, async=%d"), async);
}
while (session->state != H2_SESSION_ST_DONE) {
+ now = apr_time_now();
session->have_read = session->have_written = 0;
if (session->local.accepting
@@ -2034,39 +2108,42 @@ apr_status_t h2_session_process(h2_sessi
break;
case H2_SESSION_ST_IDLE:
- /* We trust our connection into the default timeout/keepalive
- * handling of the core filters/mpm iff:
- * - keep_sync_until is not set
- * - we have an async mpm
- * - we have no open streams to process
- * - we are not sitting on a Upgrade: request
- * - we already have seen at least one request
- */
- if (!session->keep_sync_until && async && !session->open_streams
- && !session->r && session->remote.emitted_count) {
+ if (session->idle_until && (apr_time_now() + session->idle_delay) > session->idle_until) {
+ ap_log_cerror( APLOG_MARK, APLOG_TRACE1, status, c,
+ H2_SSSN_MSG(session, "idle, timeout reached, closing"));
+ if (session->idle_delay) {
+ apr_table_setn(session->c->notes, "short-lingering-close", "1");
+ }
+ dispatch_event(session, H2_SESSION_EV_CONN_TIMEOUT, 0, "timeout");
+ goto out;
+ }
+
+ if (session->idle_delay) {
+ /* we are less interested in spending time on this connection */
+ ap_log_cerror( APLOG_MARK, APLOG_TRACE2, status, c,
+ H2_SSSN_MSG(session, "session is idle (%ld ms), idle wait %ld sec left"),
+ (long)apr_time_as_msec(session->idle_delay),
+ (long)apr_time_sec(session->idle_until - now));
+ apr_sleep(session->idle_delay);
+ session->idle_delay = 0;
+ }
+
+ h2_conn_io_flush(&session->io);
+ if (async && !session->r && (now > session->idle_sync_until)) {
if (trace) {
ap_log_cerror(APLOG_MARK, APLOG_TRACE3, status, c,
H2_SSSN_MSG(session,
"nonblock read, %d streams open"),
session->open_streams);
}
- h2_conn_io_flush(&session->io);
status = h2_session_read(session, 0);
if (status == APR_SUCCESS) {
session->have_read = 1;
- dispatch_event(session, H2_SESSION_EV_DATA_READ, 0, NULL);
}
- else if (APR_STATUS_IS_EAGAIN(status)
- || APR_STATUS_IS_TIMEUP(status)) {
- if (apr_time_now() > session->idle_until) {
- dispatch_event(session,
- H2_SESSION_EV_CONN_TIMEOUT, 0, NULL);
- }
- else {
- status = APR_EAGAIN;
- goto out;
- }
+ else if (APR_STATUS_IS_EAGAIN(status) || APR_STATUS_IS_TIMEUP(status)) {
+ status = APR_EAGAIN;
+ goto out;
}
else {
ap_log_cerror(APLOG_MARK, APLOG_DEBUG, status, c,
@@ -2078,7 +2155,6 @@ apr_status_t h2_session_process(h2_sessi
}
else {
/* make certain, we send everything before we idle */
- h2_conn_io_flush(&session->io);
if (trace) {
ap_log_cerror(APLOG_MARK, APLOG_TRACE3, status, c,
H2_SSSN_MSG(session,
@@ -2090,7 +2166,6 @@ apr_status_t h2_session_process(h2_sessi
*/
status = h2_mplx_idle(session->mplx);
if (status == APR_EAGAIN) {
- dispatch_event(session, H2_SESSION_EV_DATA_READ, 0, NULL);
break;
}
else if (status != APR_SUCCESS) {
@@ -2101,33 +2176,11 @@ apr_status_t h2_session_process(h2_sessi
status = h2_session_read(session, 1);
if (status == APR_SUCCESS) {
session->have_read = 1;
- dispatch_event(session, H2_SESSION_EV_DATA_READ, 0, NULL);
}
else if (status == APR_EAGAIN) {
/* nothing to read */
}
else if (APR_STATUS_IS_TIMEUP(status)) {
- apr_time_t now = apr_time_now();
- if (now > session->keep_sync_until) {
- /* if we are on an async mpm, now is the time that
- * we may dare to pass control to it. */
- session->keep_sync_until = 0;
- }
- if (now > session->idle_until) {
- if (trace) {
- ap_log_cerror(APLOG_MARK, APLOG_TRACE3, status, c,
- H2_SSSN_MSG(session,
- "keepalive timeout"));
- }
- dispatch_event(session,
- H2_SESSION_EV_CONN_TIMEOUT, 0, "timeout");
- }
- else if (trace) {
- ap_log_cerror(APLOG_MARK, APLOG_TRACE3, status, c,
- H2_SSSN_MSG(session,
- "keepalive, %f sec left"),
- (session->idle_until - now) / 1000000.0f);
- }
/* continue reading handling */
}
else if (APR_STATUS_IS_ECONNABORTED(status)
@@ -2145,6 +2198,18 @@ apr_status_t h2_session_process(h2_sessi
dispatch_event(session, H2_SESSION_EV_CONN_ERROR, 0, "error");
}
}
+ if (nghttp2_session_want_write(session->ngh2)) {
+ ap_update_child_status(session->c->sbh, SERVER_BUSY_WRITE, NULL);
+ status = h2_session_send(session);
+ if (status == APR_SUCCESS) {
+ status = h2_conn_io_flush(&session->io);
+ }
+ if (status != APR_SUCCESS) {
+ dispatch_event(session, H2_SESSION_EV_CONN_ERROR,
+ H2_ERR_INTERNAL_ERROR, "writing");
+ break;
+ }
+ }
break;
case H2_SESSION_ST_BUSY:
@@ -2154,7 +2219,6 @@ apr_status_t h2_session_process(h2_sessi
status = h2_session_read(session, 0);
if (status == APR_SUCCESS) {
session->have_read = 1;
- dispatch_event(session, H2_SESSION_EV_DATA_READ, 0, NULL);
}
else if (status == APR_EAGAIN) {
/* nothing to read */
@@ -2218,7 +2282,7 @@ apr_status_t h2_session_process(h2_sessi
session->iowait);
if (status == APR_SUCCESS) {
session->wait_us = 0;
- dispatch_event(session, H2_SESSION_EV_DATA_READ, 0, NULL);
+ dispatch_event(session, H2_SESSION_EV_STREAM_CHANGE, 0, NULL);
}
else if (APR_STATUS_IS_TIMEUP(status)) {
/* go back to checking all inputs again */
Index: httpd-2.4.33/modules/http2/h2_session.h
===================================================================
--- httpd-2.4.33.orig/modules/http2/h2_session.h 2018-02-10 16:46:12.000000000 +0100
+++ httpd-2.4.33/modules/http2/h2_session.h 2018-10-01 16:58:14.927879652 +0200
@@ -66,10 +66,11 @@ typedef enum {
H2_SESSION_EV_PROTO_ERROR, /* protocol error */
H2_SESSION_EV_CONN_TIMEOUT, /* connection timeout */
H2_SESSION_EV_NO_IO, /* nothing has been read or written */
- H2_SESSION_EV_DATA_READ, /* connection data has been read */
+ H2_SESSION_EV_FRAME_RCVD, /* a frame has been received */
H2_SESSION_EV_NGH2_DONE, /* nghttp2 wants neither read nor write anything */
H2_SESSION_EV_MPM_STOPPING, /* the process is stopping */
H2_SESSION_EV_PRE_CLOSE, /* connection will close after this */
+ H2_SESSION_EV_STREAM_CHANGE, /* a stream (state/input/output) changed */
} h2_session_event_t;
typedef struct h2_session {
@@ -118,7 +119,9 @@ typedef struct h2_session {
apr_size_t max_stream_mem; /* max buffer memory for a single stream */
apr_time_t idle_until; /* Time we shut down due to sheer boredom */
- apr_time_t keep_sync_until; /* Time we sync wait until passing to async mpm */
+ apr_time_t idle_sync_until; /* Time we sync wait until keepalive handling kicks in */
+ apr_size_t idle_frames; /* number of rcvd frames that kept session in idle state */
+ apr_interval_time_t idle_delay; /* Time we delay processing rcvd frames in idle state */
apr_bucket_brigade *bbtmp; /* brigade for keeping temporary data */
struct apr_thread_cond_t *iowait; /* our cond when trywaiting for data */
Index: httpd-2.4.33/modules/http2/h2_version.h
===================================================================
--- httpd-2.4.33.orig/modules/http2/h2_version.h 2018-10-01 16:58:14.915879585 +0200
+++ httpd-2.4.33/modules/http2/h2_version.h 2018-10-01 16:58:14.927879652 +0200
@@ -27,7 +27,7 @@
* @macro
* Version number of the http2 module as c string
*/
-#define MOD_HTTP2_VERSION "1.10.20"
+#define MOD_HTTP2_VERSION "1.11.0"
/**
* @macro
@@ -35,7 +35,7 @@
* release. This is a 24 bit number with 8 bits for major number, 8 bits
* for minor and 8 bits for patch. Version 1.2.3 becomes 0x010203.
*/
-#define MOD_HTTP2_VERSION_NUM 0x010a14
+#define MOD_HTTP2_VERSION_NUM 0x010b00
#endif /* mod_h2_h2_version_h */
Index: httpd-2.4.33/include/httpd.h
===================================================================
--- httpd-2.4.33.orig/include/httpd.h 2018-10-01 16:58:14.847879205 +0200
+++ httpd-2.4.33/include/httpd.h 2018-10-01 16:59:19.076238358 +0200
@@ -568,6 +568,10 @@ AP_DECLARE(const char *) ap_get_server_b
((x) == HTTP_INTERNAL_SERVER_ERROR) || \
((x) == HTTP_SERVICE_UNAVAILABLE) || \
((x) == HTTP_NOT_IMPLEMENTED))
+
+/** does the status imply header only response (i.e. never w/ a body)? */
+#define AP_STATUS_IS_HEADER_ONLY(x) ((x) == HTTP_NO_CONTENT || \
+ (x) == HTTP_NOT_MODIFIED)
/** @} */
/**