File 0003-Clean-up-dead-network-config-interface-aft... of Package powerpc-utils

Overview Repositories Revisions Requests Users Attributes Meta

File 0003-Clean-up-dead-network-config-interface-after-inactiv.patch of Package powerpc-utils

From e51995667279164a6c8ce4c3ba0217fffda22d6d Mon Sep 17 00:00:00 2001
From: Mingming Cao <mmc@linux.vnet.ibm.com>
Date: Thu, 19 Nov 2020 21:41:31 -0800
Subject: [PATCH] Clean up dead network config interface after inactive
 migration

Upstream: queued (expocted 1.3.9)
References: jsc#SLE-13837 bsc#1180129 ltc#190387
Git-commit: e51995667279164a6c8ce4c3ba0217fffda22d6d

With inactive parition migration, we found there are
dead network interface asscoiated with the SR_IOV from
source LPAR that still exist.

We need to cleanup the old network interface
related to this devname from source LPAR. Normally
in the active parition migration case, this was done
when HMC issue commands to OS remove the
VF from hybrid network. Because of the inactive
migration, the OS was not notified before migration
that the VF was removed, thus leaves the dead network
interface belongs on the original MVF on source lpar
not cleaned up. This cause the confusion of the network
manager to bring up the bondings with new MVFs at destination
LPAR.

After inactive parition migration the same devname
could possiblily used at the destination LPAR.
It can be assigned to a different hybrid
network (different hcnid). At the OS boot time,
the same devname but with different hcnid will
be configured. However the old network work interface
associated with the same devname from the source LPAR
has not been cleaned up yet.

This patch fix this by during the boot time scan and
if found an VFs has more than two bonding interfaces,
or has old VF ifcfg, removed the expired one.

Signed-off-by: Mingming Cao <mmc@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
---
 scripts/hcnmgr | 26 +++++++++++++++++++++++---
 1 file changed, 23 insertions(+), 3 deletions(-)

diff --git a/scripts/hcnmgr b/scripts/hcnmgr
index 0c09d8c4c6eb..a76505e5dd6a 100644
--- a/scripts/hcnmgr
+++ b/scripts/hcnmgr
@@ -518,6 +518,27 @@ scanhcn() {
 			[ -d "$dev" ] || continue
 			if [ -e "$dev"/ibm,hcn-id ] && get_dev_hcn "$dev"; then
 				hcnlog DEBUG "scanhcn found sr-iov device with hcnid "
+
+				# After online from inactive migration, destination
+				# LPAR may have same mvf devname but associated with different
+				# bonding than from source LPAR
+				# clean up expired bonding SR_IOV connections
+
+				for cfg in $(ls $IFCONFIG_PATH | grep "$DEVNAME" | grep "bond"); do
+					hid=$(echo "$cfg" | sed -e 's/ifcfg-//' | cut -d '-' -f 1 | sed -e 's/bond//')
+					if [ -e "$IFCONFIG_PATH/ifcfg-$DEVNAME" ]; then
+						rm "$IFCONFIG_PATH/ifcfg-$DEVNAME"
+					fi
+					if [[ $hid != "" && $hid != "$HCNID" ]] ; then
+						hcnlog INFO "Delete dead bonding slave ifcfg file $IFCONFIG_PATH/$cfg"
+						rm $IFCONFIG_PATH/"$cfg"
+						if nmcli -f NAME con show | grep -q "bond$hid-$DEVNAME\s"; then
+							hcnlog INFO "Delete dead bonding connection $connection"
+							nmcli con delete "bond$hid-$DEVNAME"
+						fi
+					fi
+				done
+
 				hcnlog INFO "scanhcn configure HCN and sr-iov device"
 				do_config_vdevice
 				# Save found HCN ids in array HcnIds
@@ -558,13 +579,12 @@ scanhcn() {
 
 	# list of all HCN ids
 	ids="${HcnIds[*]}"
-
 	# After inactive migration, LPAR may have old bonding connections
 	# with network device on original LPAR
-	# clean up dead bonding connections
+    # clean up dead bonding connections
 	for connection in $(nmcli -f NAME con show | grep "${ids// /\\|}"); do
 		dev=$(echo "$connection" | cut -d '-' -f 2)
-		if [ ! -e /sys/class/net/"$dev" ]; then
+		if [[ $dev != "NAME" && ! -e /sys/class/net/"$dev" ]]; then
 			hcnlog INFO "Delete dead bonding connection $connection"
 			nmcli con delete "$connection"
 		fi
-- 
2.26.2

Places

File 0003-Clean-up-dead-network-config-interface-after-inactiv.patch of Package powerpc-utils

Places