File dumpvdl2.changes of Package dumpvdl2
-------------------------------------------------------------------
Mon Nov 11 18:53:00 UTC 2019 - Martin Hauke <mardnh@gmx.de>
- Update to version 1.7.1
* Fixed an issue where a truncated or corrupted ICAO APDU could
cause a crash in ASN.1 decoder.
* Fixed an issue where NULL characters in XID attribute values
could cause them do be printed partially. Any non-printable
characters in octet strings printed as text are now replaced
with periods.
-------------------------------------------------------------------
Mon Aug 26 20:43:04 UTC 2019 - Martin Hauke <mardnh@gmx.de>
- Update to version 1.7.0
* Complete overhaul of output generation code.
* Significant enhancements to CLNP, COTP and IDRP decoders.
Most if not all protocol headers are now decoded and included
in the output.
* Added a decoder for X.225 Session Protocol SPDUs.
* Added a decoder for VDL SNDCF error reports.
* XID: improved decoding of XID sequencing, Frequency support
and System mask attributes.
* X.25: improved decoding of facility fields, call clearing
causes and diagnostic codes.
* Minor bug fixes.
-------------------------------------------------------------------
Fri Jan 18 23:54:00 UTC 2019 - mardnh@gmx.de
- Update to version 1.6.0
* New build system based on cmake.
* FANS/1-A CPDLC, ADS-C and ACARS decoders have been removed.
These features have been moved to libacars library, which is
now a mandatory dependency
* Added support for SoapySDR library. However there are still
some limitations with respect to SDR types which dumpvdl2
can work with. As of now, the device must support a sampling
rate of 2100000 samples per second. This will be addressed in
a future release.
* Minor bugfixes
-------------------------------------------------------------------
Sun Nov 18 18:51:58 UTC 2018 - mardnh@gmx.de
- Update to version 1.5.0
* Sync with the latest SDRPlay API v. 2.13 which is now required
to compile the program.
* Added support for SDRPlay RSPduo (with tuner selection, bias-T
and notch filters).
* Added support for RSP1A features: Bias-T and broadcast notch
filter.
* Minor bugfixes
-------------------------------------------------------------------
Wed Aug 1 19:35:17 UTC 2018 - mardnh@gmx.de
- Update to version 1.4.0
* Major improvements to the DSP and decoding engine - gives much
better decoding success rate, especially for weak transmissions
from distant aircraft.
* Each VDL2 channel is now processed in a separate thread, which
allows balancing the load onto multiple CPU cores.
* Fixed a nasty decoder bug which caused good frames to be
corrupted during decoding stage and therefore missed.
* Added CRC checking for ACARS messages. If there is a CRC
mismatch, the message will still be logged, but with an
appropriate warning.
* New StatsD metric avlc.msg.air2air - counts messages from
aircraft to aircraft (however strange it seems, such things
happen in real life).
* New StatsD metric decoder.errors.too_long - counts VDL2 bursts
dropped due to unreasonably large value in the length field.
* Due to changes in the decoding engine, the following StatsD
metric are now obsolete and have been removed:
avlc.errors.no_flag_start, avlc.errors.no_flag_end,
decoder.errors.no_preamble.
* Added --extended-header command line option which causes a few
decoder diagnostic parameters to be logged for each message.
Refer to the FAQ in README.md for description of the fields.
* Other minor bugfixes and improvements.
* C11-capable compiler is now required to build the program.
-------------------------------------------------------------------
Fri Jun 1 19:53:27 UTC 2018 - mardnh@gmx.de
- Update to version 1.3.1
* Added decpdlc utility which decodes FANS-1/A CPDLC messages
supplied from command line or from a file. Can be used to
decode CPDLC traffic received via other media than VDL-2
(eg. ACARS, HFDL, SATCOM). Refer to "decpdlc" section in
README.md for details
-------------------------------------------------------------------
Wed Apr 11 20:31:31 UTC 2018 - mardnh@gmx.de
- Update to version 1.3.0
* Added decoder for FANS-1/A ADS-C messages
* Added decoder for FANS-1/A CPDLC messages
* Human-readable formatting of CPDLC and Context Management
messages (if you still want the old format, add --dump-asn1
command line option)
* Added install rule to Makefile
* Added a sample systemd service file
* Bug fixes
-------------------------------------------------------------------
Mon Jan 1 12:12:40 UTC 2018 - mardnh@gmx.de
- Update to version 1.2.0
* Better input signal filtering - reduced bit error rate, 10-50% more
messages successfully decoded.
* SDRPlay: major bugfixes in sample buffer handling code - shall now
perform equally well as RTLSDR (or even better).
* SDRPlay: --gain knob replaced with --gr (gain reduction). This makes
gain configuration in dumpvdl2 compatible with other SDRPlay apps.
See README.md for details.
* SDRPlay: support for selecting device by serial number.
Added optional build-time PLATFORM knob which sets CPU-specific
* compiler flags to optimize the code for various flavours of
Raspberry Pi. Supported values: rpiv1, rpiv2, rpiv3.
* Other minor bug fixes
- Remove patch:
* dumpvdl2-obey-cflags.diff
-------------------------------------------------------------------
Wed Jun 28 12:36:49 UTC 2017 - jengelh@inai.de
- Remove disputable/irrelevant wording from description.
-------------------------------------------------------------------
Tue Jun 20 20:30:49 UTC 2017 - mardnh@gmx.de
- Update to version 1.1.0
* Support for SDRPlay RSP1 and 2 using native binary API
* Added dissector for ISO 8073/X.224 Connection-oriented Transport Protocol
* Added dissectors for ICAO Context Management and CPDLC
* Enhancements for ES-IS and XID dissectors
* Support for referring to dongles using their serial numbers
* Output formatting fixes
* Bug fixes
- Rebase patch:
* dumpvdl2-obey-cflags.diff
-------------------------------------------------------------------
Tue Jun 20 13:54:19 UTC 2017 - mpluskal@suse.com
- Tiny packaging cleanup
-------------------------------------------------------------------
Mon Feb 27 12:52:15 UTC 2017 - mardnh@gmx.de
- initial package
