File mpd-conf.patch of Package mpd
diff -Pdpru mpd-0.22.orig/doc/mpdconf.example mpd-0.22/doc/mpdconf.example
--- mpd-0.22.orig/doc/mpdconf.example 2020-09-23 16:26:51.000000000 +0300
+++ mpd-0.22/doc/mpdconf.example 2020-09-29 14:10:22.923270883 +0300
@@ -5,7 +5,7 @@
# Files and directories #######################################################
#
# This setting controls the top directory which MPD will search to discover the
-# available audio files and add them to the daemon's online database. This
+# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
@@ -13,20 +13,20 @@
#music_directory "~/music"
#
# This setting sets the MPD internal playlist directory. The purpose of this
-# directory is storage for playlists created by MPD. The server will use
+# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
#
-#playlist_directory "~/.mpd/playlists"
+#playlist_directory "/var/lib/mpd/playlists"
#
# This setting sets the location of the MPD database. This file is used to
-# load the database at server start up and store the database while the
+# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
#
-#db_file "~/.mpd/database"
-#
+#db_file "/var/lib/mpd/mpd.db"
+#
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
@@ -34,25 +34,25 @@
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog.
#
-#log_file "~/.mpd/log"
+log_file "/var/log/mpd.log"
#
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
#
-#pid_file "~/.mpd/pid"
+pid_file "/run/mpd/mpd.pid"
#
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
-# it was brought down. This setting is disabled by default and the server
+# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
#
-#state_file "~/.mpd/state"
+#state_file "/var/lib/mpd/mpdstate"
#
# The location of the sticker database. This is a database which
# manages dynamic information attached to songs.
#
-#sticker_file "~/.mpd/sticker.sql"
+#sticker_file "/var/lib/mpd/sticker.sql"
#
###############################################################################
@@ -64,14 +64,14 @@
# initialization. This setting is disabled by default and MPD is run as the
# current user.
#
-#user "nobody"
+#user "mpd"
#
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
#
-#group "nogroup"
+#group "audio"
#
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
@@ -82,17 +82,19 @@
#bind_to_address "any"
#
# And for Unix Socket
-#bind_to_address "~/.mpd/socket"
+#bind_to_address "/run/mpd/socket"
#
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
#
#port "6600"
#
+# This setting controls the type of information which is logged. Available
+# setting arguments are "error", "warning", "notice", "info" or "verbose".
# Suppress all messages below the given threshold. Use "verbose" for
# troubleshooting.
#
-#log_level "notice"
+log_level "warning"
#
# Setting "restore_paused" to "yes" puts MPD into pause mode instead
# of starting playback after startup.
@@ -113,10 +115,10 @@
# the other supported tags:
#metadata_to_use "+comment"
#
-# This setting enables automatic update of MPD's database when files in
+# This setting enables automatic update of MPD's database when files in
# music_directory are changed.
#
-#auto_update "yes"
+auto_update "no"
#
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself. There is no limit by default.
@@ -128,7 +130,7 @@
# Symbolic link behavior ######################################################
#
-# If this setting is set to "yes", MPD will discover audio files by following
+# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#
#follow_outside_symlinks "yes"
@@ -146,7 +148,7 @@
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#
-#zeroconf_enabled "yes"
+zeroconf_enabled "no"
#
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network. %h will be replaced with the hostname.
@@ -163,7 +165,7 @@
#
#password "password@read,add,control,admin"
#
-# This setting specifies the permissions a user has who has not yet logged in.
+# This setting specifies the permissions a user has who has not yet logged in.
#
#default_permissions "read,add,control,admin"
#
@@ -194,8 +196,8 @@ input {
# Audio Output ################################################################
#
-# MPD supports various audio output types, as well as playing through multiple
-# audio outputs at the same time, through multiple audio_output settings
+# MPD supports various audio output types, as well as playing through multiple
+# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
#
@@ -203,8 +205,9 @@ input {
#
#audio_output {
# type "alsa"
-# name "My ALSA Device"
-## device "hw:0,0" # optional
+# name "ALSA Device"
+## device "plug:plugequal" # optional
+## mixer_control "Master" # optional
## mixer_type "hardware" # optional
## mixer_device "default" # optional
## mixer_control "PCM" # optional
@@ -232,9 +235,9 @@ input {
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
-# quality "5.0"
-# bitrate "128"
-# format "44100:16:1"
+# quality "6.0"
+# bitrate "192"
+# format "48000:16:2"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
@@ -252,34 +255,34 @@ input {
# name "My recorder"
# encoder "vorbis" # optional, vorbis or lame
# path "/var/lib/mpd/recorder/mpd.ogg"
-## quality "5.0" # do not define if bitrate is defined
-# bitrate "128" # do not define if quality is defined
-# format "44100:16:1"
+# quality "6.0" # do not define if bitrate is defined
+## bitrate "192" # do not define if quality is defined
+## format "48000:16:2" #optional
#}
#
# An example of a httpd output (built-in HTTP streaming server):
#
#audio_output {
# type "httpd"
-# name "My HTTP Stream"
-# encoder "vorbis" # optional, vorbis or lame
+# name "HTTP Stream"
+# encoder "vorbis" # optional, vorbis or lame
# port "8000"
-# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
-## quality "5.0" # do not define if bitrate is defined
-# bitrate "128" # do not define if quality is defined
-# format "44100:16:1"
-# max_clients "0" # optional 0=no limit
+# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
+# quality "6.0" # do not define if bitrate is defined
+## bitrate "192" # do not define if quality is defined
+## format "48000:16:2" #optional
+## max_clients "0" # optional 0=no limit
#}
#
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#
-#audio_output {
-# type "pulse"
-# name "My Pulse Output"
+audio_output {
+ type "pulse"
+ name "Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
## media_role "media_role" #optional
-#}
+}
#
# An example of a winmm output (Windows multimedia API).
#
@@ -341,7 +344,7 @@ input {
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
-# format "44100:16:2"
+## format "48000:16:2" # optional
#}
#
## An example of a null output (for no audio output):
@@ -386,7 +389,7 @@ input {
#replaygain_limit "yes"
#
# This setting enables on-the-fly normalization volume adjustment. This will
-# result in the volume of all playing audio to be adjusted so the output has
+# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#
#volume_normalization "no"
@@ -395,9 +398,9 @@ input {
# Character Encoding ##########################################################
#
-# If file or directory names do not display correctly for your locale then you
+# If file or directory names do not display correctly for your locale then you
# may need to modify this setting.
#
-#filesystem_charset "UTF-8"
+filesystem_charset "UTF-8"
#
###############################################################################
