Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
Please login to access the resource
openSUSE:Leap:15.5:Update
debhelper
debhelper.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File debhelper.changes of Package debhelper
------------------------------------------------------------------- Thu Jan 5 07:13:31 UTC 2023 - Dirk Müller <dmueller@suse.com> - update to 13.11.4: * meson.pm: Pass --destdir to `meson install`. (Closes: #1027014) * Dh_Lib.pm: Have addsubstvars check the value for newlines (Closes: #1026014) * Stop using (fake)root for mkdirs again. Should have been removed as a part of the clean up in the previous upload but was overlooked causing breakage in packages still having `Rules-Requires-Root: binary-targets`. (Closes: #1026125) * PROGRAMMING.md: Fix typos * Dh_Lib.pm: Remove unused third parameter from install_dh_config_file * makefile.pm: Provide hook for subclasses to reuse cross-build support * Dh_Lib.pm: Revert change where `install_{file,prog,lib}` would use chown. The problem that prompted this change was not caused by debhelper but by fakeroot (#1024544) and the change in debhelper would not even function as a work around in this case. Accordingly, the extra complexity is not worth it and has been reverted. * Dh_Lib.pm: Fix typo in warning message about dherroron ------------------------------------------------------------------- Mon Dec 12 09:17:57 UTC 2022 - Jan Baier <jbaier@suse.com> - Update to version 13.11.1 * dh_installchangelogs: Ensure that at least four old entries are preserved (Closes: #1021467) * meson.pm: Use `meson setup` in the configure step rather than just `meson`. * Put newest compat level first in documentation * Rename debhelper config files to include package name * dh_installdebconf: Fix typo in manual page * Dh_Lib.pm: `qx_cmd` support env/chdir changes like `doit` (Closes: #1016354) * Remove obsolete compat checks in the code * dh_dwz: Ensure dwz multifile is owned by root:root when root should be used * dh_builddeb: Always pass `--root-owner-group` to `dpkg-deb` for dbgsym packages. * Dh_Lib.pm: Provide `mkdirs` to create (non-package) directories. * Dh_Lib.pm: Make `install_dir` chown created directories when root should be used for debhelper's own commands. This fixes #1024261 for packages that only use debhelper itself. However, third-party debhelper tools may still cause packages with incorrect ownership for now if they are run after `dh_fixperms` (or `dh_fixperms` is omitted). * Dh_Lib.pm: Ensure `install_{file,prog,lib}` uses chown when root should be used. Previously, they would skip the `chown` call and rely on `dh_fixperms` or `dpkg-deb` to fix the ownership. However, that could cause issues when the helper was run after `dh_fixperms` and install files that `dpkg-deb` would not reset ownership of. * Install `installsysusers` sequence (to match the provide). * dh_installchangelogs: Trim old Debian changelog entries automatically. Distributions can disable this by using `DEB_BUILD_OPTIONS=notrimdch`. * dh_installchangelogs.t: Force locale to be `C.UTF-8` to avoid generating invalid changelog entries under non-default locales. * meson.pm: Stop providing `MESON_TESTTHREADS` environment variable for the install target. Said variable only applies for testing. * cmake.pm: Use `cmake --install` in compat 14. (Closes: #1020732) * docs/PROGRAMMING{,.md}: Rewrite PROGRAMMING into markdown. * dh_installsystemduser: Stop masking user units on package removal. They should never have been masked in the first place. See #1021027. * dh_installinit: Remove executable bit of init scripts on package removal (via preinst). Related to #1021027. * dh_installsystemd: Stop masking system units on package removal. This is no longer necessary with the init scripts getting their exec bit cleared on package removal. (Closes: #1021027) * Dh_Lib.pm: Add `package_type` as a function (extracted from `is_udeb`). * Dh_Getopt.pm: Fix duplicated `warning` in output for a particular warning. * dh_assistant: Provide a new `detect-hook-targets` command. * dh: Recommend using `dh_assistant detect-hook-targets` for checking whether hook targets are correct. * dh: Hoist `nodoc` and `nocheck` from `DEB_BUILD_PROFILES` into `DEB_BUILD_OPTIONS` when they are present in the former and absent in the latter. Emit a warning when doing so to aid the user, so they know why this does not work when they are later building a package that does not use dh. (Closes: #979401) * dh: Provide a warning when cross building an `nocheck` is absent from `DEB_BUILD_OPTIONS` to cross builders, who are not experienced with Debian's requirements for cross-building. The warning also recommends activating the `cross` build profile and provides a way to disable the warning without using `nocheck` (for the special case, where people have a system that can run host binaries). * Dh_Lib.pm: Fix bug where `addsubstvars` would not respect the `--no-act` parameter. * dh_perl: For scripts that are detected as perl scripts that would trigger a dependency, normalize the shebang line to use the same perl as debhelper is run under (/usr/bin/perl in Debian, YMMV in derivatives). (Closes: #904409) * dh_assistant: Provide new `log-installed-files` command to help users and third-party tools record which files they have installed. Third-party tools should use the `--on-behalf-of-cmd` to have their tool name recorded. (Closes: #972724) * dh_installexamples: Explicitly recommend `examples/*` over `examples` as content for the `debian/<pkg>.examples` file to avoid the triggering `.../examples/examples` case. (Closes: #1000384) * debhelper.pod: Clarify the documentation around `-v` + `--verbose` vs. `DH_VERBOSE` vs. `DH_QUIET` and `terse` from `DEB_BUILD_OPTIONS`. Notably, clarify that `-v` and `DH_VERBOSE` provides the same functionality and that they do not cause *all* commands to be shown. (Closes: #1002464) * Update Portuguese translation (Américo Monteiro) (Closes: #1019231) * autoscripts/postinst-init-tmpfiles: Re-instate runtime check before running `systemd-tmpfiles`. However, explicitly check for `systemd-tmpfiles` rather than asserting the system was booted by systemd. This resolves #1013969 without requiring a strict dependency as originally suggested by Guilhem Moulin in #1013969. * dh_installtmpfiles: Remove the `systemd | systemd-tmpfiles` dependency as it is no longer required. (Closes: #1017441) * dh_installsystemd: Ditto. * dh_installinit: Ditto. * autoscripts/postinst-init-tmpfiles: Only pass `--root` to systemd when `DPKG_ROOT` is present (as `--root=/` is different from omitting `--root` entirely). * autoscripts/postinst-sysusers: Ditto ------------------------------------------------------------------- Mon Aug 15 09:02:09 UTC 2022 - Jan Baier <jbaier@suse.com> - Update to version 13.9 * d/control: Provide dh-sequence-installsysusers. * debhelper.pod: Add missing word "variables". * Dh_Lib.pm: Fix in addsubstvar where a value was added when it should not have been. (Closes: #1015263) ------------------------------------------------------------------- Thu Aug 4 16:44:48 UTC 2022 - Jan Baier <jbaier@suse.com> - Update to version 13.8 * dh_perl: Fix incorrect binary versioning caused by a regression in 13.3. Thanks to Niko Tyni for reporting the issue. (Closes: #997961) * d/control: Bump Standards-Version to 4.6.1 - no changes required. * root_sequence.pm: Run `dh_installsysusers` before `dh_installtmpfiles` (only affects compat 14 or later). Thanks to Nicholas Brown for the suggestion. (Closes: #1011099) * autoscripts/postinst-init-tmpfiles: Remove runtime check on the system having systemd as init system. * dh_installtmpfiles: Replace runtime check on the system running under systemd in generated `postinst` script with a dependency on `systemd | systemd-tmpfiles` added to `${misc:Depends}`. Thanks to Guilhem Moulin for the suggestion. (Closes: #1013969) * dh_installsystemd: Ditto. * dh_installinit: Ditto. * debhelper-compat-upgrade-checklist.pod: Correct description for the addition of dh_installsysusers in compat 14. * meson.pm: Use `meson install` instead of `ninja install` for dh_auto_install in compat 14. Thanks to Andrea Pappacoda for the suggestion. (Closes: #1006805) * Dh_Lib.pm: Remove double semi-colon. (Closes: #1010591) * Dh_Lib.pm: _strip_spaces now explicitly returns undef on undef argument. (Closes: #1010594) * cmake.pm: Set FETCHCONTENT_FULLY_DISCONNECTED to true. This ensures that the `FetchContent` module does not attempt to use internet connection. * debhelper-compat-upgrade-checklist.pod: Update documentation for compat 14 change. (Closes: #1011404) * debhelper.pod: Correct link to the new upgrade checklist. (Closes: #1012777) * dh_installman: Avoid false positive language detection on shared libs. * Update Portuguese translation (Américo Monteiro) (Closes: #1011256) ------------------------------------------------------------------- Mon May 2 14:33:58 UTC 2022 - Jan Baier <jbaier@suse.com> - Update to version 13.7.1 * debhelper.pod: Fix several typos. Thanks to Guillem Jover for pointing them out and proposing corrections. * dh_installalternatives: Correct a file check that caused false-positive rejections of valid alternatives files. Thanks to Hiroyuki YAMAMORI for reporting the bug and providing an initial patch. (Closes: #1009844) ------------------------------------------------------------------- Mon May 2 14:24:56 UTC 2022 - Jan Baier <jbaier@suse.com> - Update to version 13.7 * dh_installalternatives: Improve validation of alternative files to catch some "obvious" copy-waste mistakes. * dh: Invoke dh_installalternatives after dh_link in compat 14 or later. Thanks to Colin Watson for the suggestion. (Closes: #1002800) * cmake.pm: Drop -DCMAKE_SKIP_RPATH=on in compat v14. Thanks to Vagrant Cascadian for the suggestion and the investigative work on this topic. (Closes: #1004939) * debhelper-compat-upgrade-checklist.pod: New file. * debhelper.pod: Move list of supported compat levels and the related upgrade checklist into debhelper-compat-upgrade-checklist.pod. This means you now need `man 7 debhelper-compat-upgrade-checklist` to see the upgrade checklist. * dh_installdebconf: Support -D/--define command line parameters (mirroring those from dh_installdeb). * Dh_Lib.pm: Cope with "?=" as assignment operator in substvars files to be future proof with (possible) planned addition of "optional substvars. At the moment, debhelper will still always use "=" when adding a substvar but it will now preserve "?=" operator if an existing substvar is modified. * autoconf.pm: Add support for autotest test suites by passing the TESTSUITEFLAGS environment variable to `make test`. * Rewrite handling of stop services to use the `preinst` when using --no-restart-after-upgrade. This fixes a regression caused by the fix for #989155. (Closes: #994204) * dh_installmenu: Respect DPKG_ROOT when checking for update-menus. Note this implementation assumes update-menus is present both inside and outside the chroot to activate. If it is absent on either side, the update-menus call is skipped. * dh_installsysusers: Invoke systemd-sysusers even when DPKG_ROOT is set (relying on `--root`). * dh_installpam: In compat 14, install pam snippets into `/usr/lib/pam.d` instead of `/etc/pam.d`. Remember to remove (now) obsolete conffiles when you bump to compat 14. * debhelper.pod: Correct spelling of DEB_BUILD_MAINT_OPTIONS. ------------------------------------------------------------------- Mon Jan 3 10:46:23 UTC 2022 - Jan Baier <jbaier@suse.com> - Update to version 13.6 * dh_assistant: Avoid creating `debian/.debhelper` when the which-build-system sub command is invoked. Thanks to Jelmer Vernooij for spotting that bug. * dh_assistant: Add new active-compat-level command, which outputs information about which compat level is declared and active. It also tells how the compat level was declared. * Dh_Lib.pm: Add new function, get_non_binnmu_date_epoch, only needed for dh_strip_nondeterminism. * dh_installcron: Add support for `cron.yearly` packaging file. Thanks to Martin-Éric Racine for the suggestion. (Closes: #1000363) * Dh_Lib.pm: Remove support for compat 5 and 6. * debhelper.pod,debhelper-obsolete-compat.pod: Update to reflect the new status for compat 5 and 6. * dh: Add missing _ in execute_after example in POD. * dh_compress: Exclude .woff and .woff2 by default. * Update Portuguese translation (Américo Monteiro) (Closes: #1000719) ------------------------------------------------------------------- Mon Oct 18 10:28:08 UTC 2021 - Jan Baier <jbaier@suse.com> - Update to version 13.5.2 * dh_installsystemd: Revert change to deploy systemd files into usr/lib/systemd. (Closes: #993316, #993759) * dh_installinit: Ditto. * dh_systemd_enable: Ditto. * dh_systemd_start: Ditto. * SequencerUtil.pm: Remove duplicate "-a" option to some commands. Thanks to Christoph Berg for reporting the issue. (Closes: #971761) * dh_installdeb: Revert the change to rewrite `rm_conffiles` into `remove-on-upgrade` due to it causing bugs in non-trivial cases. (Closes: #994919) * dh_installtmpfiles: Add missing option name in POD documentation. * cmake.pm: make it possible to override dh provided ctest arguments * cmake.pm: Add missing import which broke cmake related builds. Thanks to Boyuan Yang for reporting the issue. (Closes: #993345) * dh_installdeb: Install debian/conffiles in compat 12+ again (undoing the compat 12 change saying dh_installdeb would ignore this file). The file can now be using for the activating the `remove-on-upgrade` feature from dpkg 1.20. * dh_installdeb: Automatically rewrite `rm_conffiles` into the new `remove-on-upgrade` feature from dpkg when possible. * cmake.pm: Pass `ARGS+=--verbose` to make when running tests in the cmake+make variant except when "terse" is in DEB_BUILD_OPTIONS. Thanks to Paul Wise for the suggestion. (Closes: #992623) * python_support.pm: Remove obsolete dh addon. It did nothing but warn and nothing used it anymore. * dh: Document debhelper provided dh addon sequences. * single_binary.pm: New dh addon ("single-binary") that explicitly activates the "single binary" work flow, where dh_auto_install uses debian/<pkg> as default --destdir when there is only a single binary package. It will error out if used in a source package building multiple binary packages. * dh: Activate "single-binary" addon by default in compat levels up to and including compat 14 when the source package only lists one binary package in debian/control. In compat 14, emit a warning when this happens implicitly requesting users to explicitly enable or disable the addon for single binary source packages to avoid surprises in compat 15. * dh_auto_install: In compat 15, remove special-case default for --destdir for single binary source packages. If the previous default is desired, please use the "single-binary" dh addon or explicitly pass --destdir to dh_auto_install. (Closes: #971432) * debian/control: Provide dh-sequence-single-binary. * debhelper.pod: Document the dh_auto_install will change behaviour in compat 15 for single binary packages and dh will warning about that in compat 14. * dh_assistant: New tool for assisting third-party tools. At the moment, it primarily supports introspection related features but will hopefully be extended to support more use cases. (Closes: #984900) ------------------------------------------------------------------- Mon Oct 18 09:14:43 UTC 2021 - Jan Baier <jbaier@suse.com> - Update to version 13.4.1 * autoscripts/*: Replace `which` with `command -v`. * dh_installsystemd: Only merge /lib/systemd/system into /usr for now. (Closes: #992554) * dh_systemd_enable: Ditto. * autoscripts/postinst-init-nostart: Call invoke-rc.d when a non-empty DPKG_ROOT is used. (Closes: #992556) * Replace "use v5.28" with "use v5.24" in Dh_Lib.pm. The change to "use v5.28" in 13.4 broke the test to distinguish 0755 from "0755" in the reset_perm_and_owner function, breaking builds. Thanks Adrian Bunk and Ansgar for help isolating the problem. * debian/changelog: Correct bug number in the 13.4 entry. * dh_dwz: run in parallel across packages. (Closes: !47) * Dh_Buildsystems.pm: Add bmake and mkcmake as third-party build systems. (Closes: !46) * Dh_Buildsystems.pm: Add golang as a third-party build system. (Closes: #981106) * autoscripts/*: Add support for DPKG_ROOT in systemd, tmpusers, sysusers and init related snippets. Based on an initial patch from Helmut Grohne. (Closes: #983566) * autoscripts/*: Reorder conditions in some scripts to avoid doing a redundant stat call when a script parameter can decide to skip it. * dh_gconf: Remove the command as it does nothing. (Closes: #908845) * doc/TODO: Remove reference to dh_gconf. * root_sequence.pm: Remove dh_gconf from root sequence and declare it as obsolete (causing errors from compat 14 if still referenced in hook targets). * man/po4a/po4a.cfg: Remove dh_gconf from translations. * AddonAPI.pm: The declare_command_obsolete command now accepts an "$error_compat" parameter to enable addons to choose which compat level that will trigger an error (though it must be minimum 13). * doc/PROGRAMMING: Update docs to reflect API change. * debhelper.pod: Document that referencing dh_gconf in hook targets will cause an error in compat 14. * dh_fixperms: Correct permissions of files beneath usr/libexec to be executable. (Closes: #979401) * dh_installtmpfiles: Only register tmpfiles ending with ".conf" as tmpfiles in /usr/lib/tmpfiles.d and /etc/tmpfiles.d. This ensures that dh_installtmpfiles gracefully copes with e.g. README files provided by systemd upstream. (Closes: #986329) * dh_installsystemd: Ditto (but only relevant in compat 12 or earlier) * cmake.pm: Pass -DCMAKE_FIND_USE_PACKAGE_REGISTRY=OFF to cmake in addition to -DCMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY=ON as the former is intended to replace the latter. Thanks to Raul Tambre for reporting the issue. (Closes: #988973) * Dh_Lib.pm: Bump version requirement to v5.28 to reflect the actual requirements (the code was using v5.28 features). Thanks to Sérgio Basto for reporting the issue. * dh_missing: Ditto. * autoscripts/postinst-init,autoscripts/postinst-systemd-start: Use "restart" instead of "start" when starting the services. This ensures a smooth transition from --restart-after-upgrade to --no-restart-after-upgrade in dh_installinit and dh_installsystemd. Thanks to Ryan Tandy for reporting the issue. (Closes: #989155) * dh_installsystemd: Remove usage of autoscripts/postinst-systemd-restart * dh_installinit: Remove usage of autoscripts/postinst-init-restart * autoscripts/autoscripts/postinst-systemd-restart: Removed. * autoscripts/postinst-init-restart: Removed * dh_installsystemd: Prefer /usr/lib/systemd/ to /lib/systemd. (Closes: #987989) * dh_systemd_enable: Ditto. * dh_systemd_start: Ditto. * dh_installinit: Ditto. * dh_installsystemd: Merge /lib/systemd into /usr/lib/systemd if both are present in the package staging directory (prefering the latter in case of conflicts). (Closes: #987989) * dh_systemd_enable: Ditto. * perl_build.pm,perl_makemaker.pm: Make debhelper use the same perl as it runs under (via Perl's $^X variable) when invoking the upstream build system. (Closes: !40, #966396) * Always generate unique doc-base file names based on package name and document ID. (Closes: #980903) ------------------------------------------------------------------- Tue Mar 16 14:41:10 UTC 2021 - Jan Baier <jbaier@suse.com> - Update to version 13.3.4 - Adapt patches to new upstream version: * remove debhelper-9.20150101-no-localized-manpages.patch * add debhelper-no-localized-manpages.patch ------------------------------------------------------------------- Sun Jul 24 16:42:15 UTC 2016 - p.drouand@gmail.com - Update to version 9.20160709 ------------------------------------------------------------------- Sun Jan 4 17:24:25 UTC 2015 - p.drouand@gmail.com - Update to version 9.20150101 - Adapt debhelper-no-localized-manpages.patch to upstream changes * debhelper-9.20150101-no-localized-manpages.patch - Remove upstreamed debhelper-findutils.patch ------------------------------------------------------------------- Fri Oct 4 02:43:46 UTC 2013 - frank.lichtenheld@sophos.com - import upstream patch debhelper-findutils.patch from Git * Avoid find -perm +mode breakage caused by findutils 4.5.11, by instead using -perm /mode (deb#700200) ------------------------------------------------------------------- Thu Sep 27 22:31:33 UTC 2012 - frank.lichtenheld@sophos.com - update to debhelper-9.20120830 * dh_installcatalogs: Turn /etc/sgml/$package.cat into conffiles and introduce dependency on trigger-based sgml-base. Closes: #477751 * dh: When there's an -indep override target without -arch, or vice versa, avoid acting on packages covered by the override target when running the command for packages not covered by it. Closes: #676462 ------------------------------------------------------------------- Fri Jul 6 21:11:04 UTC 2012 - frank.lichtenheld@sophos.com - fix Provides for package split, there is no /usr/bin/debhelper - fix wrong perl require on Fedora ------------------------------------------------------------------- Tue Jun 26 21:02:05 UTC 2012 - frank.lichtenheld@sophos.com - refresh debhelper-pod2man-no-utf8.patch to allow build on SLE 11 SP2 ------------------------------------------------------------------- Tue Jun 26 20:57:57 UTC 2012 - frank.lichtenheld@sophos.com - package debhelper separately ------------------------------------------------------------------- Mon May 21 03:31:50 UTC 2012 - i@marguerite.su - update to dpkg-1.16.3 * see http://packages.debian.org/changelogs/pool/main/d/dpkg/dpkg_1.16.3/changelog - update to debhelper 9.20120518 * Fix versioned dependency on dpkg for xz options. Closes: #672895 * dh_link: Doc improvement. Closes: #672988 - update to devscripts-2.11.7 * see http://packages.debian.org/changelogs/pool/main/d/devscripts/devscripts_2.11.7/changelog - reworked patch. remove version for archtable. for it's universal. - add dh_make 0.60 * see http://packages.debian.org/changelogs/pool/main/d/dh-make/dh-make_0.60/changelog - add dh_autoreconf 6 * see http://packages.debian.org/changelogs/pool/main/d/dh-autoreconf/dh-autoreconf_6/changelog ------------------------------------------------------------------- Thu May 3 20:23:11 UTC 2012 - frank.lichtenheld@sophos.com - install missing parts of devscripts * install man pages installed by debian/manpages * install symlinks installed by debian/links ------------------------------------------------------------------- Sun Jan 29 20:54:50 UTC 2012 - frank.lichtenheld@sophos.com - update to dpkg-1.15.8.12 * Do not fail to unpack shared directories missing on the file system from packages being replaced by other packages. Debian Bug #631808 * Defer hardlink renames so that there's never a point were the new file contents are accessible from the final path before they have been fsync()ed and cannot be executed causing ETXTBSY when trying to open the to be installed paths for writing. Debian Bug #635683 * Add armhf support to ostable and triplettable. Debian Bugs #594179, #639674 ------------------------------------------------------------------- Tue Dec 20 20:15:25 UTC 2011 - coolo@suse.com - remove call to suse_update_config (very old work around) ------------------------------------------------------------------- Sat Nov 26 00:18:57 UTC 2011 - frank.lichtenheld@sophos.com - update to dpkg-1.15.8.11 * Do not segfault on "dpkg -i --no-act". * Fix typo in "dpkg-name --overwrite" argument parsing so that it actually works at all. Ubuntu Bug #728708 * Fix dpkg-split to not corrupt binary part metadata when generating the split packages on 32-bit systems. * Fix a regression in dpkg-divert where using --rename led to a failure when the rename implies crossing file systems. ------------------------------------------------------------------- Sun Sep 18 17:17:12 UTC 2011 - jengelh@medozas.de - Remove redundant tags/sections from specfile (cf. packaging guidelines) - Use %_smp_mflags for parallel build ------------------------------------------------------------------- Thu Mar 31 11:39:18 UTC 2011 - flichtenheld@astaro.com - Merge openSUSE:Tools changes with system:packagemanager changes ------------------------------------------------------------------- Thu Mar 17 15:32:12 UTC 2011 - mvyskocil@suse.cz - split the u-a to separate spec file to reduce a build cycle ------------------------------------------------------------------- Wed Mar 16 09:07:15 UTC 2011 - mvyskocil@suse.cz - update to dpkg-1.15.8.10 - update to debhelper-7.5.17 - update to devscripts-2.10.71 - see /usr/share/doc/packages/deb/*/changelog for details - build and install update-alternatives as separate subpackage - add download urls to source tags - remove pushd/popd madness in %prep, use only one cd .. - convert sed archtable hackery to patch and refresh patches - rewrite a architecture mugging in config.h to be more readable ------------------------------------------------------------------- Fri Jan 28 14:17:27 UTC 2011 - adrian@suse.de - fix build on old distros ------------------------------------------------------------------- Fri Jan 28 12:57:25 UTC 2011 - flichtenheld@astaro.com - install missing debhelper files - install dh - install Debian/Debhelper/Buildsystem/*.pm ------------------------------------------------------------------- Thu Jul 29 23:38:02 CEST 2010 - wolfgang.rosenauer@basyskom.de - make 'debcommit -r' work with mercurial 1.6 ------------------------------------------------------------------- Fri Apr 9 09:23:40 UTC 2010 - puzel@novell.com - update to dpkg-1.15.6.1 - update to debhelper-7.4.17 - update to devscripts-2.10.62 - see /usr/share/doc/packages/deb/*/changelog for details - split deb-devel subpackage ------------------------------------------------------------------- Fri Feb 19 11:24:07 UTC 2010 - puzel@novell.com - update to dpkg-1.15.5.6 - update to debhelper-7.4.15 - update to devscripts-2.10.61 - see /usr/share/doc/packages/deb/*/changelog for details ------------------------------------------------------------------- Wed Jan 6 04:37:36 UTC 2010 - jengelh@medozas.de - enable parallel building with smp_mflags ------------------------------------------------------------------- Fri Dec 18 09:06:00 UTC 2009 - wr@rosenauer.org - try to fix older dists ------------------------------------------------------------------- Wed Nov 25 12:01:33 UTC 2009 - puzel@novell.com - update to dpkg-1.15.5.2, debhelper-7.4.8, devscripts-2.10.58 - huge number of changelogs - please see appropriate changelogs for details: - /usr/share/doc/packages/deb/debhelper/changelog - /usr/share/doc/packages/deb/dpkg/changelog ------------------------------------------------------------------- Thu Nov 12 09:14:55 UTC 2009 - wr@rosenauer.org - include devscripts-2.10.55 - add sensible-editor helper script ------------------------------------------------------------------- Thu Aug 13 13:01:58 UTC 2009 - puzel@novell.com - update to debhelper-7.3.12 * dh: Allow creation of new sequences (such as to handle a patch target for quilt), by adding an add_command function to the sequence addon interface. * perl_build: Fix Build check to honor source directory setting. * perl_build: Avoid failing if forced to be used in dh_auto_clean when Build does not exist (ie due to being run twice in a row). * dh_builddeb: Fix man page typo. * dh_installdeb: In udeb mode, support the menutest and isinstallable maintainer scripts. ------------------------------------------------------------------- Tue Aug 4 09:54:08 CEST 2009 - puzel@novell.com - update to debhelper-7.3.9 * cmake: Avoid forcing rpath off as this can break some test suites. It gets stripped by cmake at install time. ------------------------------------------------------------------- Mon Jul 27 10:28:40 CEST 2009 - puzel@novell.com - update to debhelper-7.3.8 * First upload of buildsystems support to unstable. Summary: Adds --buildsystem (modular, OO buildsystem classes), --sourcedirectory, --builddirectory, and support for cmake and ant. * python_distutils buildsystem: Build for all supported Python versions that are installed. Ensure that correct shebangs are created by using `python' first during build and install. Also build with python*-dbg if the package build-depends on them. ------------------------------------------------------------------- Thu Jul 16 12:24:58 CEST 2009 - puzel@novell.com - update to debhelper-7.3.4 * Add a versioned dep on perl-base, to get a version that supports GetOptionsFromArray. * dh_install: Fix support for the case where --sourcedir=debian/tmp/foo is used. Perl was not being greedy enough and the 'foo' was not stripped from the destination directory in this unusual case. * dh_install: Fix support for the case where debian/tmp is explicitly specified in filename paths despite being searched by default. * dh_install: Add test suite covering the last 5 bugs. ------------------------------------------------------------------- Fri Jul 3 10:48:44 CEST 2009 - puzel@novell.com - update to debhelper-7.3.1 * Modular object oriented dh_auto_* buildsystem support, contributed by Modestas Vainius - dh_auto_* --sourcedirectory can now be used to specify a source directory if sources and/or the whole buildsystem lives elsewhere than the top level directory. - dh_auto_* --builddirectory can now be used to specify a build directory to use for out of source building, for build systems that support it. - dh_auto_* --buildsystem can now be used to override the autodetected build system, or force use of a third-party class. - dh_auto_* --list can be used to list available and selected build systems. - Adds support for cmake. - For the perl_build build system, Build is used consistently instead of falling back to using the generated Makefile. - Historical dh_auto_* behavior should be preserved despite these large changes.. * Move two more command-specific options to only be accepted by the commands that use them. The options are: --sourcedir, --destdir If any third-party debhelper commands use either of the above options, they will be broken, and need to be changed to pass options to init(). * Make dh not complain about unknown, command-specific options passed to it, and further suppress warnings about such options it passes on to debhelper commands. This was attempted incompletely before in version 7.2.17. * dh_install: Fix installation of entire top-level directory from debian/tmp. * dh_install: Handle correctly the case where a glob expands to a dangling symlink, installing the dangling link as requested. * dh_install: Fix fallback use of debian/tmp in v7 mode; a bug caused it to put files inside a debian/tmp directory in the package build directory, now that prefix is stripped. * dh_shlibdeps: Ensure DEBIAN directory exists, as dpkg-shlibdeps prints a confusing warning if it does not. * dh_auto_install: Pass --install-layout=deb to setup.py to support python 2.6. * Allow command-specific options to be passed to commands via dh without causing other commands to emit a getopt warning or deprecation message. * dh_installinfo: No longer inserts install-info calls into maintainer scripts, as that is now triggerized. Adds a dependency via misc:Depends to handle partial upgrades. Note that while dh_installinfo already required that info files had a INFO-DIR-SECTION, the new system also requires they have START-INFO-DIR-ENTRY and END-INFO-DIR-ENTRY for proper registration. I assume there will be some mass bug filing for any packages that do not have that. ------------------------------------------------------------------- Fri Jun 12 09:03:44 CEST 2009 - puzel@suse.cz - update to debhelper-7.2.16 * dh_gconf: Add missed half of postrm fragment removal. ------------------------------------------------------------------- Thu Jun 11 11:33:32 CEST 2009 - puzel@suse.cz - update to debhelper-7.2.15 * dh_strip, dh_shlibdeps: Add support for OCaml shared libraries. * dh_compress: Avoid compressing .svg and .sgvz files, since these might be used as images on a html page, and also to avoid needing to special case the .svgz extension when compressing svg. * dh_scrollkeeper: Now a deprecated no-op. * dh_gconf: Remove postrm fragment that handled schema migration from /etc to /usr. ------------------------------------------------------------------- Thu May 21 12:11:37 CEST 2009 - puzel@suse.cz - update to debhelper-7.2.14 * dh: Avoid writing log after override_dh_clean is run. * dh_auto_configure: Pass --skipdeps safely via PERL_AUTOINSTALL. * dh_auto_configure: Revert --skipdeps change ------------------------------------------------------------------- Wed May 13 12:05:11 CEST 2009 - puzel@suse.cz - update to debhelper-7.2.11 * dh: Support --with addon,addon,... * dh_auto_configure: Add --skipdeps when running Makefile.PL, to prevent Module::Install from trying to download dependencies. * Support debian/foo.os files to suppliment previous debian/foo.arch file support. ------------------------------------------------------------------- Mon May 11 14:56:30 CEST 2009 - puzel@suse.cz - update to debhelper-7.2.10 * Close COMPAT_IN filehandle. * dh_auto_configure: Clarify man page re adding configure parameters. * dh_auto_configure: Pass packlist=0 when running Makefile.PL, in case it is a Build.PL passthru, to avoid it creating the .packlist file. ------------------------------------------------------------------- Wed May 6 15:50:23 CEST 2009 - puzel@suse.cz - update to debhelper-7.2.9 * dh_fixperms: Ensure lintian overrides are mode 644. * dh_fixperms: Fix permissions of OCaml .cmxs files. * dh: Add --without to allow disabling sequence addons (particularly useful to disable the default python-support addon). - split -lang subpackage ------------------------------------------------------------------- Tue Apr 21 15:56:49 CEST 2009 - puzel@suse.cz - update to debhelper-7.2.8 * dh_desktop: Now a deprecated no-op, since desktop-file-utils uses triggers. * Move dh sequence documentation to PROGRAMMING. ------------------------------------------------------------------- Thu Apr 16 11:55:35 CEST 2009 - puzel@suse.cz - update to debhelper-7.2.7 * fix calling the same helper for separate packages in the override of dh binary-indep/binary-arch * add --remaining-packages option * dh_icons: ignore gnome and hicolor themes (will be handled by triggers) ------------------------------------------------------------------- Mon Apr 6 15:23:19 CEST 2009 - puzel@suse.cz - add a hack to detect architecture correctly (bnc#469337) ------------------------------------------------------------------- Mon Mar 16 16:43:15 CET 2009 - puzel@suse.cz - update to debhelper-7.2.6 * examples files updated to add dh_bugfiles, remove obsolete dh_python * dh_auto_test: Support DEB_BUILD_OPTIONS=nocheck * set MODULEBUILDRC=/dev/null when running perl Build scripts to avoid ~/.modulebuildrc influencing the build * dh_installmenus: Revert removal of update-menus calls ------------------------------------------------------------------- Mon Mar 9 17:40:28 CET 2009 - puzel@suse.cz - update to debhelper-7.2.4 * dh_makeshlibs: Fix --add-udeb, for real * dh_installmenus: Now that a triggers capable menu and dpkg are in stable, menu does not need to be explicitly run in maintainer scripts, except for packages with menu-methods files. * dh_installdocs: No longer add maintainer script code to call doc-base, as it supports triggers in stable. * dh_bugfiles: New program, contributed by Modestas Vainius. * dh: Override LC_ALL, not LANG. * dh_installchangelogs: Support -X to exclude automatic installation of specific upstream changelogs. * Compat level 4 is now deprecated. * dh_makeshlibs: Re-add --add-udeb support. * dh_shlibdeps: Remove --add-udeb switch (was accidentially added here). ------------------------------------------------------------------- Thu Mar 5 15:26:28 CET 2009 - puzel@suse.cz - update to debhelper-7.2.2 * dh_installmodules: Give files in /etc/modprobe.d a .conf syntax, as required by new module-init-tools. * dh_installmodules: Add preinst and postinst code to handle cleanly renaming the modprobe.d files on upgrade. * Two updates to conffile moving code from wiki: - Support case where the conffile name is a substring of another conffile's name. - Support case where dpkg-query says the file is obsolete. ------------------------------------------------------------------- Tue Mar 3 10:10:53 CET 2009 - puzel@suse.cz - update to dpkg-1.15.0 and debhelper-7.2.1 - huge number of changes, please see /usr/share/doc/packages/deb/dpkg/changelog and /usr/share/doc/packages/deb/debhelper/changelog for details ------------------------------------------------------------------- Tue Jan 20 10:01:33 CET 2009 - puzel@suse.cz - partially revert change from Aug 12 2008 (bnc#467332) ------------------------------------------------------------------- Thu Dec 18 13:48:25 CET 2008 - puzel@suse.cz - update debhelper to 7.1.1 * dh_install(1): Order options alphabetically. * Fix some docs that refered to --srcdir rather than --sourcedir. * Add Vcs-Browser field. * Ignore unknown options in DH_OPTIONS. ------------------------------------------------------------------- Wed Oct 29 17:28:46 CET 2008 - puzel@suse.cz - update debhelper to 7.1.0 * dh_installchangelogs: Fall back to looking for changelog files ending with ".txt". * dh_gencontrol: Ensure misc:Depends is set in substvars to avoid dpkg complaining about it when it's empty. * dh: Fix typo in example. * Allow individual debhelper programs to define their own special options by passing a hash to init(), which is later passed on the Getopt::Long. * Move many command-specific options to only be accepted by the command that uses them. Affected options are: -x, -r, -R, -l, -L, -m, --include-conffiles, --no-restart-on-upgrade, --no-start, --restart-after-upgrade, --init-script, --filename, --flavor, --autodest, --libpackage, --add-udeb, --dpkg-shlibdeps-params, --dpkg-gencontrol-params, --update-rcd-params, --major, --remove-d, --dirs-only, --keep-debug, --version-info, --list-missing, --fail-missing, --language, --until, --after, --before, --remaining, --with * If any third-party debhelper commands use any of the above options, they will be broken, and need to be changed to pass options to init(). * To avoid breaking rules files that pass options to commands that do not use them, debhelper will now only warn if it encounters an unknown option. This will be converted back to an error later. ------------------------------------------------------------------- Tue Sep 16 18:07:44 CEST 2008 - mrueckert@suse.de - do not package update-alternatives it conflicts with the required package update-alternatives ------------------------------------------------------------------- Tue Sep 2 13:56:11 CEST 2008 - prusnak@suse.cz - updated to 1.14.21 * lots of fixes - see ChangeLog - enabled SELinux support [Fate#303662] ------------------------------------------------------------------- Mon Sep 1 14:02:20 CEST 2008 - puzel@suse.cz - update debhelper to 7.0.17 * dh_auto_install: Fix man page, was referring to dh_auto_clean. * dh_gencontrol: Drop the Homepage field from udebs. Closes debian bug #492719 * Typo. Closes debian bug #493062 * dh_auto_install: Improve check for MakeMaker, to avoid passing PREFIX if the Makefile was generated by Module::Build::Compat. Closes debian bug #496157 ------------------------------------------------------------------- Tue Aug 12 11:29:14 CEST 2008 - puzel@suse.cz - fix paths * install perl stuff to %{perl_vendorlib}/Debian where it is expected by alien ------------------------------------------------------------------- Mon Aug 11 13:21:25 CEST 2008 - coolo@suse.de - fix paths ------------------------------------------------------------------- Mon Jul 21 11:18:02 CEST 2008 - puzel@suse.cz - update debhelper to 7.0.16 * dh: Avoid passing --with on to subcommands. Closes debian bug #490886 * dh_installchangelogs: When searching for changelog in v7 mode, skip empty files. Closes debian bug #490937 ------------------------------------------------------------------- Fri Jul 18 13:10:50 CEST 2008 - puzel@suse.cz - update debhelper to 7.0.15 * dh_clean: Do not delete *-stamp files in -k mode in v7. Closes debian bug #489918 ------------------------------------------------------------------- Tue Jul 8 11:20:11 CEST 2008 - puzel@suse.cz - update debhelper to 7.0.14 * load python-support sequence file first, to allow ones loaded later to disable it ------------------------------------------------------------------- Mon Jul 7 13:49:46 CEST 2008 - puzel@suse.cz - update dpkg to 1.14.19 * a lot of changes and bugfixes * for complete changelog see program sources or /usr/share/doc/packages/deb/dpkg/changelog * removed dpkg-gcc4.patch - compiles fine without it * removed dpkg-make.patch, dpkg-automake.diff, dpkg-strip.patch * not needed anymore because of heavy changes in the build system * removed dpkg_1.10.23-doc.patch - fixed in upstream - update debhelper to 7.0.13 * a lot of changes and bugfixes * for complete changelog see program sources or /usr/share/doc/packages/deb/debhelper/changelog * debhelper-no-localized-manpages.diff - do not use po4a to generate localized documentation - dpkg is now built by configure/make - debhelper is now built by make ------------------------------------------------------------------- Thu Jul 26 18:04:30 CEST 2007 - dmueller@suse.de - remove config.guess dependency completely ------------------------------------------------------------------- Tue Jul 24 14:52:04 CEST 2007 - dmueller@suse.de - link the config.guess from automake ------------------------------------------------------------------- Sun Apr 22 22:37:02 CEST 2007 - ro@suse.de - use texlive for building ------------------------------------------------------------------- Fri Mar 30 08:49:13 CEST 2007 - aj@suse.de - Adjust BuildRequires. ------------------------------------------------------------------- Fri Aug 18 14:44:34 CEST 2006 - aj@suse.de - Fix build with new make. ------------------------------------------------------------------- Wed Jan 25 21:35:25 CET 2006 - mls@suse.de - converted neededforbuild to BuildRequires ------------------------------------------------------------------- Fri Jan 13 13:12:52 CET 2006 - schwab@suse.de - Don't strip binaries. ------------------------------------------------------------------- Wed Dec 21 01:21:54 CET 2005 - ro@suse.de - remove unpackaged symlinks ------------------------------------------------------------------- Thu Sep 8 14:49:24 CEST 2005 - mjancar@suse.cz - package missing dpkg-{architecture,scanpackages,scansources} (#106239) ------------------------------------------------------------------- Thu May 12 17:38:51 CEST 2005 - meissner@suse.de - use RPM_OPT_FLAGS ------------------------------------------------------------------- Fri Apr 8 13:50:27 CEST 2005 - uli@suse.de - fixed to build with GCC4 ------------------------------------------------------------------- Thu Feb 10 16:56:12 CET 2005 - rengelhard@suse.de - update dpkg to 1.10.27 (just translation updates) ------------------------------------------------------------------- Thu Jan 20 23:38:24 CET 2005 - ro@suse.de - update dependency: html2txt -> html2text ------------------------------------------------------------------- Wed Jan 12 15:45:21 CET 2005 - rengelha@suse.de - update dpkg to 1.10.26 ------------------------------------------------------------------- Wed Jan 5 13:41:10 CET 2005 - rengelhard@suse.de - update debhelper to 4.2.30 ------------------------------------------------------------------- Tue Jan 4 11:11:22 CET 2005 - rengelhard@suse.de - update debhelper to 4.2.29 ------------------------------------------------------------------- Wed Dec 15 12:06:57 CET 2004 - rengelhard@suse.de - update debhelper to 4.2.28 ------------------------------------------------------------------- Mon Dec 13 09:16:46 CET 2004 - rengelhard@suse.de - update debhelper to 4.2.27 ------------------------------------------------------------------- Tue Nov 16 15:44:34 CET 2004 - rengelhard@suse.de - update dpkg to 1.10.25 ------------------------------------------------------------------- Thu Nov 11 10:42:02 CET 2004 - rengelhard@suse.de - update debhelper to 4.2.24 ------------------------------------------------------------------- Fri Oct 29 13:55:11 CEST 2004 - rengelhard@suse.de - update debhelper to 4.2.23 ------------------------------------------------------------------- Wed Oct 27 12:15:38 CEST 2004 - rengelhard@suse.de - update dpkg to 1.10.24 ------------------------------------------------------------------- Wed Oct 13 12:11:21 CEST 2004 - rengelhard@suse.de - update debhelper to 4.2.21 ------------------------------------------------------------------- Wed Sep 8 00:06:37 CEST 2004 - ro@suse.de - remove stuff now present in own update-alternatives package ------------------------------------------------------------------- Thu Aug 19 14:50:34 CEST 2004 - mcihar@suse.cz - update debhelper to 4.2.19 - update dpkg to 1.10.23 - use sed rather than patches - remove patches accepted in upstream ------------------------------------------------------------------- Mon May 31 14:53:43 CEST 2004 - mcihar@suse.cz - update debhelper to 4.2.10 - update dpkg to 1.10.21 ------------------------------------------------------------------- Thu Mar 04 12:43:17 CET 2004 - mcihar@suse.cz - no root for build - revert to manual debhelper installation as installation using debhelper needs dpkg and debhelper installed ------------------------------------------------------------------- Wed Mar 03 18:08:58 CET 2004 - mcihar@suse.cz - debhelper has debian/control file, so do not install manually - update debhelper to 4.2.4 - update dpkg to 1.10.18.1 ------------------------------------------------------------------- Wed Jan 28 00:25:16 CET 2004 - ro@suse.de - debhelper has no debian/control file, so install manually ------------------------------------------------------------------- Tue Jan 27 14:09:01 CET 2004 - mcihar@suse.cz - install debhelper man pages on correct place ------------------------------------------------------------------- Mon Jan 26 15:09:20 CET 2004 - mcihar@suse.cz - updated debhelper to 4.1.88 and dpkg to 1.10.18 ------------------------------------------------------------------- Wed Aug 20 19:54:08 CEST 2003 - mjancar@suse.cz - require the perl version we build with ------------------------------------------------------------------- Thu Aug 07 16:02:18 CEST 2003 - mcihar@suse.cz - updated debhelper to 4.1.57 ------------------------------------------------------------------- Mon Jul 28 14:13:38 CEST 2003 - schwab@suse.de - Fix format string. - Fix undefined use of longjmp. - Use perl_vendorlib. ------------------------------------------------------------------- Wed Jun 18 15:08:58 CEST 2003 - mcihar@suse.cz - updated debhelper to 4.1.47 (mostly fixes in dh_python) - included directories for translated man pages - use find_lang ------------------------------------------------------------------- Tue May 13 16:45:18 CEST 2003 - mcihar@suse.cz - updated debhelper to 4.1.43 - updated dpkg to 1.1.10 ------------------------------------------------------------------- Tue Apr 08 11:48:37 CEST 2003 - mcihar@suse.cz - updated debhelper to 4.1.40 - fixed problems with new coreutils ------------------------------------------------------------------- Thu Mar 06 15:40:08 CET 2003 - mcihar@suse.cz - configuration files under /etc marked as %config ------------------------------------------------------------------- Thu Jan 30 14:19:51 CET 2003 - mcihar@suse.cz - updated debhelper to 4.1.29: * Added a dh_python command. * Various fixes. ------------------------------------------------------------------- Wed Nov 13 12:22:45 CET 2002 - mcihar@suse.cz - updated dpkg to 1.10.9, major changes: * Make the multiline regex have an upper bound, instead of being unbounded, as newer perls have a larger stack frame, which cause them to segfault quicker with larger inputs. * Fix segfault in md5sum if the file being checked doesn't exist. * Fix extraction of md5sum in dpkg-scanpackages. * Handle directories better in md5sum. * Fix several read pass buffer bugs, and a memleak. * Fix segfault when --auto-deconfigure is given. - updated debhelper to 4.1.20, major changes: * typo in dh_shlibdeps(1) * dh_fixperms: Make sure .pm files are 0644. * dh_strip: detect and don't strip debug/*.so files. * Various improvements to debhelper(1). * Clarified dh_perl man page. * Fixed excessive escaping around terms in DH_EXCLUDE_FIND. * Patch from Andrew Suffield to make dh_perl understand #!/usr/bin/env perl - included part of postinst script from debian package ------------------------------------------------------------------- Mon Nov 11 11:26:13 CET 2002 - ro@suse.de - changed neededforbuild <sp> to <opensp> - changed neededforbuild <sp-devel> to <> ------------------------------------------------------------------- Wed Aug 28 12:37:07 MEST 2002 - mcihar@suse.cz - corrected requires ------------------------------------------------------------------- Wed Aug 7 15:05:04 CEST 2002 - mcihar@suse.cz - updated to debhelper 4.1.3: * various bugfixes * removed /usr/doc manglement code from postinst and prerm * removed dh_installxaw * dh_installchangelogs installs debian/NEWS - updated to dpkg 1.10.4: * plenty of bugfixes and new switches * added Large File Summit extension * added manpages for dpkg.cfg and dselect.cfg * updated translations * install archtable into /usr/share/dpkg/ - dpkg is now build by debian/rules not by script in spec - removed md5sum.1 start-stop-daemon.8 install-info.8 manpages also for other locales (these programs are not installed) ------------------------------------------------------------------- Tue Jun 11 09:16:14 CEST 2002 - mcihar@suse.cz - updated to debhelper 4.0.11 and dpkg 1.9.21 ------------------------------------------------------------------- Mon Aug 13 15:51:56 CEST 2001 - ro@suse.de - changed neededforbuild <sp_libs> to <sp-devel> ------------------------------------------------------------------- Fri Jun 8 15:13:02 CEST 2001 - cihlar@suse.cz - fixed to compile with new autoconf ------------------------------------------------------------------- Tue Apr 24 12:12:56 CEST 2001 - cihlar@suse.cz - fixed warnings on ia64 ------------------------------------------------------------------- Wed Apr 18 09:07:26 CEST 2001 - cihlar@suse.cz - fixed to compile ------------------------------------------------------------------- Mon Mar 5 14:38:45 CET 2001 - cihlar@suse.cz - dpkg updated to version 1.8.3.1 - debhelper updated to version 3.0.8 ------------------------------------------------------------------- Tue Dec 5 14:56:23 CET 2000 - schwab@suse.de - Fix broken declaration. ------------------------------------------------------------------- Tue Oct 31 10:57:36 CET 2000 - cihlar@suse.cz - update to version 1.6.14 - bzipped sources ------------------------------------------------------------------- Tue May 23 16:48:45 CEST 2000 - cihlar@suse.cz - added files in /etc and /var to %files ------------------------------------------------------------------- Mon May 22 15:19:20 CEST 2000 - cihlar@suse.cz - removed install-info and start-stop-daemon ------------------------------------------------------------------- Mon May 15 17:20:51 CEST 2000 - schwab@suse.de - Fixed for ia64. ------------------------------------------------------------------- Wed May 3 17:15:12 CEST 2000 - cihlar@suse.cz - package created - version 1.4.0.35 (debhelper 1.1.24)
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
