File 0001-BUG-MAJOR-http-reject-any-empty-content-length-heade.patch of Package haproxy.30278
From 6492f1f29d738457ea9f382aca54537f35f9d856 Mon Sep 17 00:00:00 2001
From: Willy Tarreau <w@1wt.eu>
Date: Wed, 9 Aug 2023 08:32:48 +0200
Subject: [PATCH 1/1] BUG/MAJOR: http: reject any empty content-length header
value
The content-length header parser has its dedicated function, in order
to take extreme care about invalid, unparsable, or conflicting values.
But there's a corner case in it, by which it stops comparing values
when reaching the end of the header. This has for a side effect that
an empty value or a value that ends with a comma does not deserve
further analysis, and it acts as if the header was absent.
While this is not necessarily a problem for the value ending with a
comma as it will be cause a header folding and will disappear, it is a
problem for the first isolated empty header because this one will not
be recontructed when next ones are seen, and will be passed as-is to the
backend server. A vulnerable HTTP/1 server hosted behind haproxy that
would just use this first value as "0" and ignore the valid one would
then not be protected by haproxy and could be attacked this way, taking
the payload for an extra request.
In field the risk depends on the server. Most commonly used servers
already have safe content-length parsers, but users relying on haproxy
to protect a known-vulnerable server might be at risk (and the risk of
a bug even in a reputable server should never be dismissed).
A configuration-based work-around consists in adding the following rule
in the frontend, to explicitly reject requests featuring an empty
content-length header that would have not be folded into an existing
one:
http-request deny if { hdr_len(content-length) 0 }
The real fix consists in adjusting the parser so that it always expects a
value at the beginning of the header or after a comma. It will now reject
requests and responses having empty values anywhere in the C-L header.
This needs to be backported to all supported versions. Note that the
modification was made to functions h1_parse_cont_len_header() and
http_parse_cont_len_header(). Prior to 2.8 the latter was in
h2_parse_cont_len_header(). One day the two should be refused but the
former is also used by Lua.
The HTTP messaging reg-tests were completed to test these cases.
Thanks to Ben Kallus of Dartmouth College and Narf Industries for
reporting this! (this is in GH #2237).
---
reg-tests/http-messaging/h1_to_h1.vtc | 26 ++++++++++++
reg-tests/http-messaging/h2_to_h1.vtc | 60 +++++++++++++++++++++++++++
src/h1.c | 20 +++++++--
src/h2.c | 20 +++++++--
4 files changed, 120 insertions(+), 6 deletions(-)
diff --git a/reg-tests/http-messaging/h1_to_h1.vtc b/reg-tests/http-messaging/h1_to_h1.vtc
index 0d6536698..67aba1440 100644
--- a/reg-tests/http-messaging/h1_to_h1.vtc
+++ b/reg-tests/http-messaging/h1_to_h1.vtc
@@ -273,3 +273,29 @@ client c3h1 -connect ${h1_feh1_sock} {
# arrive here.
expect_close
} -run
+
+client c4h1 -connect ${h1_feh1_sock} {
+ # this request is invalid and advertises an invalid C-L ending with an
+ # empty value, which results in a stream error.
+ txreq \
+ -req "GET" \
+ -url "/test31.html" \
+ -hdr "content-length: 0," \
+ -hdr "connection: close"
+ rxresp
+ expect resp.status == 400
+ expect_close
+} -run
+
+client c5h1 -connect ${h1_feh1_sock} {
+ # this request is invalid and advertises an empty C-L, which results
+ # in a stream error.
+ txreq \
+ -req "GET" \
+ -url "/test41.html" \
+ -hdr "content-length:" \
+ -hdr "connection: close"
+ rxresp
+ expect resp.status == 400
+ expect_close
+} -run
diff --git a/reg-tests/http-messaging/h2_to_h1.vtc b/reg-tests/http-messaging/h2_to_h1.vtc
index 91d1056d8..637b66486 100644
--- a/reg-tests/http-messaging/h2_to_h1.vtc
+++ b/reg-tests/http-messaging/h2_to_h1.vtc
@@ -9,6 +9,8 @@ barrier b1 cond 2 -cyclic
barrier b2 cond 2 -cyclic
barrier b3 cond 2 -cyclic
barrier b4 cond 2 -cyclic
+barrier b5 cond 2 -cyclic
+barrier b6 cond 2 -cyclic
server s1 {
rxreq
@@ -30,6 +32,12 @@ server s1 {
barrier b4 sync
# the next request is never received
+
+ barrier b5 sync
+ # the next request is never received
+
+ barrier b6 sync
+ # the next request is never received
} -repeat 2 -start
haproxy h1 -conf {
@@ -119,6 +127,32 @@ client c1h2 -connect ${h1_feh2_sock} {
txdata -data "this is sent and ignored"
rxrst
} -run
+
+ # fifth request is invalid and advertises an invalid C-L ending with an
+ # empty value, which results in a stream error.
+ stream 9 {
+ barrier b5 sync
+ txreq \
+ -req "GET" \
+ -scheme "https" \
+ -url "/test5.html" \
+ -hdr "content-length" "0," \
+ -nostrend
+ rxrst
+ } -run
+
+ # sixth request is invalid and advertises an empty C-L, which results
+ # in a stream error.
+ stream 11 {
+ barrier b6 sync
+ txreq \
+ -req "GET" \
+ -scheme "https" \
+ -url "/test6.html" \
+ -hdr "content-length" "" \
+ -nostrend
+ rxrst
+ } -run
} -run
# HEAD requests : don't work well yet
@@ -261,4 +295,30 @@ client c3h2 -connect ${h1_feh2_sock} {
txdata -data "this is sent and ignored"
rxrst
} -run
+
+ # fifth request is invalid and advertises invalid C-L ending with an
+ # empty value, which results in a stream error.
+ stream 9 {
+ barrier b5 sync
+ txreq \
+ -req "POST" \
+ -scheme "https" \
+ -url "/test25.html" \
+ -hdr "content-length" "0," \
+ -nostrend
+ rxrst
+ } -run
+
+ # sixth request is invalid and advertises an empty C-L, which results
+ # in a stream error.
+ stream 11 {
+ barrier b6 sync
+ txreq \
+ -req "POST" \
+ -scheme "https" \
+ -url "/test26.html" \
+ -hdr "content-length" "" \
+ -nostrend
+ rxrst
+ } -run
} -run
diff --git a/src/h1.c b/src/h1.c
index 4e224f895..92ec96bfe 100644
--- a/src/h1.c
+++ b/src/h1.c
@@ -34,13 +34,20 @@ int h1_parse_cont_len_header(struct h1m *h1m, struct ist *value)
int not_first = !!(h1m->flags & H1_MF_CLEN);
struct ist word;
- word.ptr = value->ptr - 1; // -1 for next loop's pre-increment
+ word.ptr = value->ptr;
e = value->ptr + value->len;
- while (++word.ptr < e) {
+ while (1) {
+ if (word.ptr >= e) {
+ /* empty header or empty value */
+ goto fail;
+ }
+
/* skip leading delimiter and blanks */
- if (unlikely(HTTP_IS_LWS(*word.ptr)))
+ if (unlikely(HTTP_IS_LWS(*word.ptr))) {
+ word.ptr++;
continue;
+ }
/* digits only now */
for (cl = 0, n = word.ptr; n < e; n++) {
@@ -79,6 +86,13 @@ int h1_parse_cont_len_header(struct h1m *h1m, struct ist *value)
h1m->flags |= H1_MF_CLEN;
h1m->curr_len = h1m->body_len = cl;
*value = word;
+
+ /* Now either n==e and we're done, or n points to the comma,
+ * and we skip it and continue.
+ */
+ if (n++ == e)
+ break;
+
word.ptr = n;
}
/* here we've reached the end with a single value or a series of
--- a/src/h2.c 2023-08-17 10:00:48.696160830 +0200
+++ b/src/h2.c 2023-08-17 10:03:52.629476864 +0200
@@ -80,14 +80,20 @@ int h2_parse_cont_len_header(unsigned in
int not_first = !!(*msgf & H2_MSGF_BODY_CL);
struct ist word;
- word.ptr = value->ptr - 1; // -1 for next loop's pre-increment
+ word.ptr = value->ptr;
e = value->ptr + value->len;
- while (++word.ptr < e) {
+ while (1) {
+ if (word.ptr >= e) {
+ /* empty header or empty value */
+ goto fail;
+ }
+
/* skip leading delimiter and blanks */
- if (unlikely(HTTP_IS_LWS(*word.ptr)))
+ if (unlikely(HTTP_IS_LWS(*word.ptr))) {
+ word.ptr++;
continue;
-
+ }
/* digits only now */
for (cl = 0, n = word.ptr; n < e; n++) {
unsigned int c = *n - '0';
@@ -125,6 +131,13 @@ int h2_parse_cont_len_header(unsigned in
*msgf |= H2_MSGF_BODY_CL;
*body_len = cl;
*value = word;
+
+ /* Now either n==e and we're done, or n points to the comma,
+ * and we skip it and continue.
+ */
+ if (n++ == e)
+ break;
+
word.ptr = n;
}
/* here we've reached the end with a single value or a series of