File dropbear.changes of Package dropbear

Overview Repositories Revisions Requests Users Attributes Meta

File dropbear.changes of Package dropbear (Revision d4090bd2d358883b9dee26009e01e973)

Currently displaying revision d4090bd2d358883b9dee26009e01e973 , Show latest

-------------------------------------------------------------------
Mon Aug 10 08:13:56 UTC 2015 - thardeck@suse.com

- updated to upstream version 2015.68
  * Reduce local data copying for improved efficiency. Measured 30%
    increase in throughput for connections to localhost
  * Forwarded TCP ports connect asynchronously and try all available addresses
    (IPv4, IPv6, round robin DNS)
  * Fix all compile warnings, many patches from Gaël Portay
    Note that configure with -Werror may not be successful on some platforms (OS X)
    and some configuration options may still result in unused variable
    warnings.
  * Use TCP Fast Open on Linux if available. Saves a round trip at connection
    to hosts that have previously been connected.
    Needs a recent Linux kernel and possibly "sysctl -w net.ipv4.tcp_fastopen=3"
    Client side is disabled by default pending further compatibility testing
    with networks and systems.
  * Increase maximum command length to 9000 bytes
  * Free memory before exiting, patch from Thorsten Horstmann. Useful for
    Dropbear ports to embedded systems and for checking memory leaks
    with valgrind. Only partially implemented for dbclient.
    This is disabled by default, enable with DROPBEAR_CLEANUP in sysoptions.h
  * DROPBEAR_DEFAULT_CLI_AUTHKEY setting now always prepends home directory unless
    there is a leading slash (~ isn't treated specially)
  * Fix small ECC memory leaks
  * Tighten validation of Diffie-Hellman parameters, from Florent Daigniere of
    Matta Consulting. Odds of bad values are around 2**-512 -- improbable.
  * Twofish-ctr cipher is supported though disabled by default
  * Fix pre-authentication timeout when waiting for client SSH-2.0 banner, thanks
    to CL Ouyang
  * Fix null pointer crash with restrictions in authorized_keys without a command, patch from
    Guilhem Moulin
  * Ensure authentication timeout is handled while reading the initial banner,
    thanks to CL Ouyang for finding it.
  * Fix null pointer crash when handling bad ECC keys. Found by afl-fuzz

-------------------------------------------------------------------
Thu Feb  5 16:26:06 UTC 2015 - thardeck@suse.com

- fixed checksum URL

-------------------------------------------------------------------
Wed Jan 28 21:40:28 UTC 2015 - thardeck@suse.com

- updated to upstream version 2015.67
  * Call fsync() after generating private keys to ensure they aren't lost if a
    reboot occurs. Thanks to Peter Korsgaard
  * Disable non-delayed zlib compression by default on the server. Can be
    enabled if required for old clients with DROPBEAR_SERVER_DELAY_ZLIB
  * Default client key path ~/.ssh/id_dropbear
  * Prefer stronger algorithms by default, from Fedor Brunner. 
    AES256 over 3DES
    Diffie-hellman group14 over group1
  * Add option to disable CBC ciphers.
  * Disable twofish in default options.h
  * Enable sha2 HMAC algorithms by default, the code was already required
    for ECC key exchange. sha1 is the first preference still for performance. 
  * Fix installing dropbear.8 in a separate build directory, from Like Ma
  * Allow configure to succeed if libtomcrypt/libtommath are missing, from Elan Ruusamäe
  * Don't crash if ssh-agent provides an unknown type of key. From Catalin Patulea
  * Minor bug fixes, a few issues found by Coverity scan

-------------------------------------------------------------------
Thu Dec  4 12:13:24 UTC 2014 - thardeck@suse.com

- replaced deprecated gpg-offline check by obs-service-source_validator

-------------------------------------------------------------------
Fri Oct 24 08:30:31 UTC 2014 - thardeck@suse.com

- updated to upstream version 2014.66
  * Use the same keepalive handling behaviour as OpenSSH. This will work better
    with some SSH implementations that have different behaviour with unknown
    message types.
  * Don't reply with SSH_MSG_UNIMPLEMENTED when we receive a reply to our own
    keepalive message
  * Set $SSH_CLIENT to keep bash happy, patch from Ryan Cleere
  * Fix wtmp which broke since 2013.62, patch from Whoopie

-------------------------------------------------------------------
Mon Aug 11 08:38:04 UTC 2014 - thardeck@suse.com

- updated to upstream version 2014.65
  * Fix 2014.64 regression, server session hang on exit with scp (and probably
    others), thanks to NiLuJe for tracking it down
  * Fix 2014.64 regression, clock_gettime() error handling which broke on older
    Linux kernels, reported by NiLuJe
  * Fix 2014.64 regression, writev() could occassionally fail with EAGAIN which
    wasn't caught
  * Avoid error message when trying to set QoS on proxycommand or multihop pipes
  * Use /usr/bin/xauth, thanks to Mike Frysinger
  * Don't exit the client if the local user entry can't be found, thanks to iquaba

-------------------------------------------------------------------
Mon Jul 28 09:40:02 UTC 2014 - thardeck@suse.com

- removed obsolete gpg soure code verifcation workaround
- added missing systemd entries for dropbear-keygen.service
- updated to upstream version 2014.64
  * Fix compiling with ECDSA and DSS disabled
  * Don't exit abruptly if too many outgoing packets are queued for writev(). Patch
    thanks to Ronny Meeus
  * The -K keepalive option now behaves more like OpenSSH's "ServerAliveInterval".
    If no response is received after 3 keepalives then the session is terminated. This
    will close connections faster than waiting for a TCP timeout.
  * Rework TCP priority setting. New settings are
    if (connecting || ptys || x11) tos = LOWDELAY
    else if (tcp_forwards) tos = 0
    else tos = BULK
    Thanks to Catalin Patulea for the suggestion.
  * Improve handling of many concurrent new TCP forwarded connections, should now
    be able to handle as many as MAX_CHANNELS. Thanks to Eduardo Silva for reporting
    and investigating it.
  * Make sure that exit messages from the client are printed, regression in 2013.57
  * Use monotonic clock where available, timeouts won't be affected by system time
    changes
  * Add -V for version

-------------------------------------------------------------------
Thu Feb 20 09:25:00 UTC 2014 - thardeck@suse.com

- fixed automatic tarball verfication
- updated regular init script to also create ECDSA keys

-------------------------------------------------------------------
Wed Feb 19 14:40:50 UTC 2014 - thardeck@suse.com

- update to upstream version 2014.63
  * Fix ~. to terminate a client interactive session after waking a laptop
  from sleep.
  * Changed port separator syntax again, now using host^port. This is because
  IPv6 link-local addresses use %. Reported by Gui Iribarren
  * Avoid constantly relinking dropbearmulti target, fix "make install"
  for multi target, thanks to Mike Frysinger
  * Avoid getting stuck in a loop writing huge key files, reported by Bruno
  Thomsen
  * Don't link dropbearkey or dropbearconvert to libz or libutil,
  thanks to Nicolas Boos
  * Fix linking -lcrypt on systems without /usr/lib, thanks to Nicolas Boos
  * Avoid crash on exit due to cleaned up keys before last packets are sent,
  debugged by Ronald Wahl
  * Fix a race condition in rekeying where Dropbear would exit if it received a
  still-in-flight packet after initiating rekeying. Reported by Oliver Metz.
  This is a longstanding bug but is triggered more easily since 2013.57
  * [...]
- updated service files and activated building of ecdsa keys
- only package the old init service in distributions without systemd
- adapted spec to follow systemd package guidelines
- cleaned up spec file

-------------------------------------------------------------------
Wed Dec  4 13:50:10 UTC 2013 - thardeck@suse.com

- imported upstream version 2013.62
  * Disable "interactive" QoS connection options when a connection doesn't
    have a PTY (eg scp, rsync). Thanks to Catalin Patulea for the patch.
  * Log when a hostkey is generated with -R, fix some bugs in handling server
    hostkey commandline options
  * Fix crash in Dropbearconvert and 521 bit key, reported by NiLuJe
  * Update config.guess and config.sub again
  * ECC (elliptic curve) support. Supports ECDSA hostkeys (requires new keys to
    be generated) and ECDH for setting up encryption keys (no intervention
    required). This is significantly faster.
  * curve25519-sha256@libssh.org support for setting up encryption keys. This is
    another elliptic curve mode with less potential of NSA interference in
    algorithm parameters. curve25519-donna code thanks to Adam Langley
  * -R option to automatically generate hostkeys. This is recommended for
    embedded platforms since it allows the system random number device
    /dev/urandom a longer startup time to generate a secure seed before the
    hostkey is required.
  * Compile fixes for old vendor compilers like Tru64 from Daniel Richard G.
  * Make authorized_keys handling more robust, don't exit encountering
    malformed lines. Thanks to Lorin Hochstein and Mark Stillwell

-------------------------------------------------------------------
Thu Oct 17 08:35:01 UTC 2013 - thardeck@suse.com

- imported upstream version 2013.60
  * Fix "make install" so that it doesn't always install to /bin and /sbin
  * Fix "make install MULTI=1", installing manpages failed
  * Fix "make install" when scp is included since it has no manpage
  * Make --disable-bundled-libtom work
- used as bug fix release for bnc#845306 - VUL-0: CVE-2013-4421

-------------------------------------------------------------------
Thu Oct 10 07:29:00 UTC 2013 - thardeck@suse.com

- provided links for download sources
- employed gpg-offline - verify sources

-------------------------------------------------------------------
Mon Oct  7 08:10:32 UTC 2013 - thardeck@suse.com

- imported upstream version 2013.59
  * Fix crash from -J command 
    Thanks to Lluís Batlle i Rossell and Arnaud Mouiche for patches
  * Avoid reading too much from /proc/net/rt_cache since that causes
    system slowness. 
  * Improve EOF handling for half-closed connections
    Thanks to Catalin Patulea
  * Send a banner message to report PAM error messages intended for the user
    Patch from Martin Donnelly
  * Limit the size of decompressed payloads, avoids memory exhaustion denial
    of service 
    Thanks to Logan Lamb for reporting and investigating it
  * Avoid disclosing existence of valid users through inconsistent delays
    Thanks to Logan Lamb for reporting
  * Update config.guess and config.sub for newer architectures
  * Avoid segfault in server for locked accounts
  * "make install" now installs manpages
    dropbearkey.8 has been renamed to dropbearkey.1
    manpage added for dropbearconvert
  * Get rid of one second delay when running non-interactive commands

-------------------------------------------------------------------
Sat Apr 20 18:49:38 UTC 2013 - thardeck@suse.com

- reverted init file installation on 12.3

-------------------------------------------------------------------
Fri Apr 19 08:26:17 UTC 2013 - thardeck@suse.com

- imported upstream version 2013.58
  * Fix building with Zlib disabled, thanks to Hans Harder and cuma@freetz
  * Use % as a separator for ports, fixes scp in multihop mode, from Hans Harder
  * Reject logins for other users when running as non-root, from Hans Harder
  * Disable client immediate authentication request by default, it prevents passwordless logins from working

-------------------------------------------------------------------
Fri Mar 22 08:48:43 UTC 2013 - thardeck@suse.com

- imported upstream version 2013.56
  * Allow specifying cipher (-c) and MAC (-m) lists for dbclient
  * Allow using 'none' cipher or MAC (off by default, use options.h). Encryption
  is used during authentication then disabled, similar to OpenSSH HPN mode
  * Allow a user in immediately if the account has a blank password and blank
  passwords are enabled
  * Include a few extra sources of entropy from /proc on Linux, hash private keys
  as well. Dropbear will also write gathered entropy back into /dev/urandom
  * Added hmac-sha2-256 and hmac-sha2-512 support (off by default, use options.h)
  * Don't sent bad address "localhost" for -R forward connections,
  reported by Denis Bider
  * Add "-B" runtime option to allow blank passwords
  * Allow using IPv6 bracket notation for addresses in server "-p" option, from Ben Jencks
  * A few improvements for Android from Reimar Döffinger
  * Fix memory leak for TCP forwarded connections to hosts that timed out,
  reported by Norbert Benczúr. Appears to be a very long-standing bug.
  * Fix "make clean" for out of tree builds
  * Fix compilation when ENABLE_{SVR,CLI}_AGENTFWD are unset

-------------------------------------------------------------------
Thu Aug  2 11:13:49 UTC 2012 - thardeck@suse.com

- removed PAM dependency since Dropbear should be usable in initrd and PAM wasn't used without an additional patch anyway https://wiki.yoctoproject.org/wiki/PAM_Integration#dropbear

-------------------------------------------------------------------
Mon Jul  9 20:11:26 UTC 2012 - thardeck@suse.com

- fixed typo in service file

-------------------------------------------------------------------
Sat Jun 30 11:49:10 UTC 2012 - thardeck@suse.com

- added systemd service files for 12.1 and later
- cleaned up sysconfig and rcdropbear files

-------------------------------------------------------------------
Tue Jun 19 12:42:00 UTC 2012 - thardeck@suse.com

- added init daemon with key generation option
- added sysconfig file with default configuration

-------------------------------------------------------------------
Fri Jun 15 09:45:36 UTC 2012 - thardeck@suse.com

- updated spec file - changed the group

-------------------------------------------------------------------
Wed Jun 13 11:50:22 UTC 2012 - thardeck@suse.com

- initial version 2012.55

Places

File dropbear.changes of Package dropbear (Revision d4090bd2d358883b9dee26009e01e973)

Places