openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File README.SUSE.v0.2 of Package ceph

README.SUSE for the ceph package
================================

Information in this document is mainly taken from the ceph homepage
[1]. For details about the internals and the architecture, please refer
to the latter. Especially [2] is a good read to get aquainted with the
concepts behind ceph.

[1] http://ceph.com

[2] http://ceph.com/docs/master/architecture/

Ceph Components
===============

- Monitor (abbrevs.: mon, ceph-mon):
   - One or more (3 recommended for high availability)
   - Always odd number for decision making purposes
   - Handles critical cluster state and configuration information
   - Tracks the list of osds and their current state
   - Through it, clients connect to the distributed file system
 - Meta Data Server (abbbrevs.: mds, ceph-mds):
   - Provides the ceph filesystem service
   - One or more:
     - state <active>: Provides Scalability
     - state <standby>: Provides High Availability
 - Object Storage Daemon (abbrevs.: osd, ceph-osd):
   - One or more, the more the better for data replication
   - Provides the RADOS service
   - Peers with other osds for data replication
   - Services object read/write/etc request from clients

Howto set up a small Ceph cluster
=================================

In this howto (and the corresponding configuration), 5 server instances,
host0 through host4, are considered and assigned as follows:

mon:		host0
 mds:		host0
 osd0:		host1
 osd1:		host2
 osd2:		host3

client:	host4

Do the following to set up a small cluster for basic testing:

1. Install required ceph packages, 'zypper in ceph' should do the trick

2. Copy the ceph.conf.SUSE in this directory to host0 as
    /etc/ceph/ceph.conf

3. The easiest way to set things up is to use public key authentication
    for all osds. This way you will not have to type passwords too
    often. So create a ssh key pair on host0 and copy the public key to
    all osds or all hosts you need access to. Please refer to external
    documentation on how to do this. Remember, this is optional.

4. Create btrfs filesystems on each host except the client (host4) you
    want to use as storage device:

mkfs.btrfs /dev/sdb

Every other filesystem will work, so would a partition for basic
    testing, but btrfs and a dedicated device is recommended.

5. Create required directories on each host like so:

host0: mkdir -p /data/mon.host0
     host1: mkdir -p /data/osd.0
     host2: mkdir -p /data/osd.1
     host3: mkdir -p /data/osd.2
     host4: mkdir -p /mnt/cephfs

6. There is a powerful tool (mkcephfs) which will now set up all hosts
    according to there individual configuration. For manual setup,
    please refer to 'man mkcephfs'.

So, do the following on host0 (mon/mds):

mkcephfs -c /etc/ceph/ceph.conf --mkbtrfs -a

The '-a' switch tells mkcephfs to setup all osds via ssh.

This will copy the configuration to all hosts and will setup the
    entire cluster.

7. Now, just run the following to start all daemons on all hosts and
    mount all filesystems to their specified targets:

/etc/init.d/ceph -a start

If everything has gone right, your cluster is set up and running.

8. There are two interesing commands to check if everything is running
    fine:

ceph -s: Shows the status of the cluster, including the number of
              osds and monitors
     ceph -w: Watch the status as data is copied to and from the osds

9. To actually use the cluster, perform the following steps on a client
    (here: host4):

1. Make sure ceph-kmp (the kernel modules) is installed, 'zypper in
       ceph-kmp' should do the trick.
    2. modprobe ceph
    3. mount.ceph host0:/ /mnt/cephfs

Howto create a RBD image
========================

On a machine within the cluster, do:

1. rbd create foo --size 1024

This creates a remote image of 1G (1024M) in the default pool,
     which is 'rbd'. Use the -p switch to create the image in another
     pool.

2. Check if image has been created:

$ rbd ls
      $ rbd info foo

On a client machine, do:

1. Load the rbd module
  2. echo "10.11.1.48 name=admin rbd foo" > /sys/bus/rbd/add
     (replace 10.11.1.48 with the IP of your monitor (ceph-mon) system)
  3. Now you should have a /dev/rbd0 on which you can create a file
     system:

$ mkfs -t ext3 /dev/rbd0

4. Mount it:

$ mount -t ext3 /dev/rbd0 <mountpoint>

Howto create a virtual machine RBD image
========================================

1. Install packages virt-utils and kvm
 2. This command will create an RBD image in pool data called openSUSE
    with size 10G:

$ qemu-img create -f rbd rbd:data/openSUSE 10G

3. Start the VM with:

$ qemu-kvm --drive format=rbd,file=rbd:data/openSUSE \
               -cdrom <path to installation media> \
               -boot d -m 1024

Feedback always welcome at http://bugzilla.novell.com.

Places

File README.SUSE.v0.2 of Package ceph

Places