File gutenprint.spec of Package gutenprint
#
# spec file for package gutenprint
#
# Copyright (c) 2014 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.
# Please submit bugfixes or comments via http://bugs.opensuse.org/
#
Name: gutenprint
Url: http://gutenprint.sourceforge.net
Version: 5.2.10
Release: 0
%define gutenprintmajor 5.2
BuildRequires: cairo-devel
BuildRequires: cups-ddk
BuildRequires: cups-devel
BuildRequires: gimp-devel
BuildRequires: glib2-devel
BuildRequires: gtk2-devel
BuildRequires: libpng-devel
BuildRequires: libtiff-devel
%if 0%{?suse_version} >= 1140
# The CUPS dyesub USB backend requires libusb-1.0 which is available since openSUSE 11.4.
# When libusb-1.0 is not available, the configure magic does not build the CUPS dyesub USB backend.
BuildRequires: libusb-1_0-devel
%endif
BuildRequires: pango-devel
BuildRequires: python-cups
Summary: Printer drivers for CUPS from the Gutenprint project
License: GPL-2.0+
Group: Hardware/Printing
# The "rastertogutenprint" filter requires CUPS and the "cups" output device in Ghostscript:
Requires: cups >= 1.2.2
# Up to openSUSE 12.1 the package cups has "Requires: ghostscript_any" so that the above
# "Requires: cups" is sufficient to also get the "cups" output device in Ghostscript.
# Since openSUSE 12.2 the package cups has only "Recommends: ghostscript" to avoid
# an implicit build dependency cycle between the main-packages cups and ghostscript.
# Therefore after openSUSE 12.1 gutenprint needs an explicit "Requires: ghostscript"
# to ensure that the "cups" output device in Ghostscript is available:
%if 0%{?suse_version} > 1210
Requires: ghostscript
%endif
# Install into this non-root directory (required when it is built as non-root user):
BuildRoot: %{_tmppath}/%{name}-%{version}-build
# URL for Source0:
# http://downloads.sourceforge.net/project/gimp-print/gutenprint-5.2/5.2.10/gutenprint-5.2.10.tar.bz2
Source0: gutenprint-%{version}.tar.bz2
# Patch0...Patch9 is for patches from upstream:
# Patch10...Patch99 is for openSUSE patches which which are intended for upstream:
# Patch10 escputil-send_nulls-void.patch makes send_nulls a void function
# because nowhere is a return value of send_nulls used in escputil.c
# to fix a "no-return-in-nonvoid-function escputil.c:683" compiler error:
%description
The Gutenprint (formerly Gimp-Print) printer drivers for CUPS.
See the user's manual at /usr/share/gutenprint/doc/gutenprint-users-manual.pdf
%package devel
Summary: Development environment for Gutenprint
Group: Development/Libraries/C and C++
Requires: cups >= 1.2.2
Requires: ghostscript-library >= 7.05
Requires: glibc-devel
Requires: gtk2-devel
Requires: gutenprint = %{version}
%description devel
The development environment for the Gutenprint printer drivers.
See the developers guide to Gutenprint at /usr/share/gutenprint/doc/gutenprint.pdf
%package gimpplugin
Summary: Alternative GIMP print plug-in from the Gutenprint project
Group: Hardware/Printing
%description -n gutenprint-gimpplugin
The enhanced Gutenprint GIMP print plug-in offers an alternative
with additional capabilities to the plugin supplied with GIMP.
See the user's manual at /usr/share/gutenprint/doc/gutenprint-users-manual.pdf
%prep
# Be quiet when unpacking:
%setup -q
%build
CFLAGS="$RPM_OPT_FLAGS -fstack-protector -fno-strict-aliasing -I/usr/include/gtk-2.0 -I/usr/include/cairo -I/usr/include/glib-2.0 -I%{_libdir}/gtk-2.0/include -I%{_libdir}/glib-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/gimp-2.0" ./configure \
--prefix=%{_prefix} \
--mandir=%{_mandir} \
--infodir=%{_infodir} \
--sysconfdir=%{_sysconfdir} \
--libdir=%{_libdir} \
--disable-static \
--enable-shared \
--enable-cups-ppds \
--enable-simplified-cups-ppds \
--disable-translated-cups-ppds \
--disable-libgutenprintui \
--enable-libgutenprintui2 \
--enable-samples \
--enable-escputil \
--with-pic=yes \
--without-foomatic \
--without-foomatic3 \
--without-ghostscript \
--without-gimp \
--with-gimp2
make
%install
rm -rf $RPM_BUILD_ROOT/usr/share/cups/model
# Create required directories first:
install -d -m755 $RPM_BUILD_ROOT/bin
install -d -m755 $RPM_BUILD_ROOT/usr/share/cups/model
install -d -m755 $RPM_BUILD_ROOT/usr/lib/cups/filter
# Install Gutenprint:
make DESTDIR=$RPM_BUILD_ROOT install
# Work with upstream compliant CUPS 1.4 on all platforms
# which means to have a fixed "/usr/lib/cups/" directory
# on all platforms (see Novell/Suse Bugzilla bnc#575544):
for D in lib32 lib64
do for F in commandtocanon commandtoepson rastertogutenprint.%{gutenprintmajor}
do if test -e $RPM_BUILD_ROOT/usr/$D/cups/filter/$F
then mv -f $RPM_BUILD_ROOT/usr/$D/cups/filter/$F $RPM_BUILD_ROOT/usr/lib/cups/filter/$F
fi
done
F="gutenprint.%{gutenprintmajor}"
if test -e $RPM_BUILD_ROOT/usr/$D/cups/driver/$F
then mv -f $RPM_BUILD_ROOT/usr/$D/cups/driver/$F $RPM_BUILD_ROOT/usr/lib/cups/driver/$F
fi
done
# Disable the run-time PPD generator /usr/lib/cups/driver/gutenprint.5.2
# so that it is not executed by the cups-driverd (e.g. in response to a "lpinfo -m" request)
# to avoid duplicated PPDs because we create the PPDs during compile-time (via --enable-cups-ppds)
# and provide ready-made PPDs in /usr/share/cups/model/gutenprint/... in the RPM package
# see "Regarding CUPS PPD files" at https://bugzilla.novell.com/show_bug.cgi?id=514994#c9
chmod a-x $RPM_BUILD_ROOT/usr/lib/cups/driver/gutenprint.%{gutenprintmajor}
# Move the special testpattern generator away from the usual bin directory:
mv $RPM_BUILD_ROOT/%{_bindir}/testpattern $RPM_BUILD_ROOT/%{_libdir}/gutenprint/%{gutenprintmajor}
# Remove dispensable .po files (only the .mo files are needed on the end-users's system):
rm $RPM_BUILD_ROOT/usr/share/locale/*/gutenprint_*.po
%find_lang gutenprint
%post
/sbin/ldconfig
# update quietly Gutenprint PPD files in /etc/cups/ppd/ if such PPD files exist
# using the new PPD files under /usr/share/cups/model/gutenprint/ as templates
# see https://bugzilla.novell.com/show_bug.cgi?id=637455
/usr/sbin/cups-genppdupdate -q || /bin/true
# exit successfully in any case:
exit 0
%postun
/sbin/ldconfig
# exit successfully in any case:
exit 0
%files -f gutenprint.lang
%defattr(-,root,root)
%config /etc/cups/command.types
%{_bindir}/cups-calibrate
%{_bindir}/escputil
%{_sbindir}/cups-genppd*
%dir %{_libdir}/gutenprint
%dir %{_libdir}/gutenprint/%{gutenprintmajor}
%{_libdir}/gutenprint/%{gutenprintmajor}/*
%{_libdir}/libgutenprint*.so?*
%dir /usr/share/cups
/usr/share/cups/calibrate.ppm
%dir /usr/share/cups/model
%dir /usr/share/cups/model/gutenprint
%dir /usr/share/cups/model/gutenprint/%{gutenprintmajor}
%dir /usr/share/cups/model/gutenprint/%{gutenprintmajor}/C
/usr/share/cups/model/gutenprint/%{gutenprintmajor}/C/*
%dir /usr/lib/cups/driver
/usr/lib/cups/driver/gutenprint.%{gutenprintmajor}
/usr/lib/cups/filter/commandtocanon
/usr/lib/cups/filter/commandtoepson
/usr/lib/cups/filter/rastertogutenprint.%{gutenprintmajor}
%if 0%{?suse_version} >= 1140
/usr/lib/cups/backend/gutenprint52+usb
%dir /usr/share/cups/usb
/usr/share/cups/usb/net.sf.gimp-print.usb-quirks
%endif
%dir /usr/share/gutenprint
%dir /usr/share/gutenprint/%{gutenprintmajor}
/usr/share/gutenprint/%{gutenprintmajor}/*
%dir /usr/share/gutenprint/samples/
/usr/share/gutenprint/samples/*
%dir /usr/share/gutenprint/doc
%doc /usr/share/gutenprint/doc/*
%doc /usr/share/man/man?/*.gz
%files devel
%defattr(-,root,root)
%dir /usr/include/gutenprint
/usr/include/gutenprint/*
%dir /usr/include/gutenprintui2
/usr/include/gutenprintui2/*
%{_libdir}/libgutenprint*.la
%{_libdir}/pkgconfig/gutenprint*
%{_libdir}/libgutenprint*.so
%files gimpplugin
%defattr(-,root,root)
%dir %{_libdir}/gimp
%dir %{_libdir}/gimp/2.0
%dir %{_libdir}/gimp/2.0/plug-ins
%{_libdir}/gimp/2.0/plug-ins/*
%changelog
