Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
openSUSE:Leap:42.2:Ports
E20-efi.aarch64
uboot-image-a13olinuxino-install
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File uboot-image-a13olinuxino-install of Package E20-efi.aarch64
#!/bin/bash # # U-Boot injection script. # # This script installs U-Boot SPL, MLO, BL1, IMX, whatever images into # the target image during setup time as well as on first boot. # # It also serves as our generic hook into things we need to do to fix # up the build. set -x diskname=$1 flavor=a13olinuxino is_firstboot= if [ "$is_firstboot" ]; then # We're not inside the image build, but in the first boot of an # installed system diskname=$(df / --output=source | tail -n1 | sed 's/[0-9]*$//;s/p$//') is_firstboot=1 if [ -d /boot/efi ]; then is_efi=1 fi cd / # During firstboot, gdisk is available at /usr/sbin. export PATH="$PATH:/usr/sbin/" else # We don't have gdisk in the build system, so point to the rootfs binary export PATH="$PATH:/usr/src/packages/KIWIROOT-oem/usr/sbin/" fi ( if [ -d EFI ]; then # We're on an EFI build, so kiwi doesn't copy u-boot over. # This is a hack to chdir into the obs-build dir to find # our u-boot binaries nevertheless. cd /usr/src/packages/KIWIROOT-oem/ is_efi=1 fi #========================================== # Convert GPT to MBR if necessary #------------------------------------------ if [ "$is_efi" ]; then # Some systems can not deal with GPT partition tables, so for # those we convert the GPT to MBR force_mbr= if [ -f "boot/vc/bootcode.bin" ]; then # The RPi firmware can only read MBR force_mbr=1 fi if [ -f "boot/cuboxi-spl.bin" -o -f "boot/u-boot.imx" ]; then # SPL goes at sector 2, overlapping GPT force_mbr=1 fi if [ -f "boot/origen-spl.bin" ]; then # SPL goes at sector 1, overlapping GPT force_mbr=1 fi if [ -f "boot/arndale-bl1.bin" -o \ -f "boot/bl1.bin.hardkernel" -o \ -f "boot/E4412_S.bl1.HardKernel.bin" ]; then # BL1 goes at sector 1, overlapping GPT force_mbr=1 fi if [ "$force_mbr" ]; then # The target system doesn't support GPT, so let's move it to # MBR partition layout instead. # # Also make sure to set the ESP partition to type 0xc so that # broken firmware (Rpi) detects it as FAT. cat > gdisk.tmp <<-'EOF' x r g t 1 c w y EOF losetup /dev/loop3 $diskname dd if=/dev/loop3 of=mbrid.bin bs=1 skip=440 count=4 gdisk /dev/loop3 < gdisk.tmp dd of=/dev/loop3 if=mbrid.bin bs=1 seek=440 count=4 losetup -d /dev/loop3 rm -f mbrid.bin rm -f gdisk.tmp fi fi #========================================== # adjust Raspberry Pi partition table #------------------------------------------ if [ -f "boot/vc/bootcode.bin" -a ! "$is_efi" ]; then echo -n > gdisk.tmp if [ ! "$is_firstboot" ]; then # Set the name of the first partition to "vcboot" and mark # the 1st and 2nd partitions as bootable (checked by RPi loader and U-Boot) cat >> gdisk.tmp <<-'EOF' c 1 vcboot x a 1 2 64 a 2 2 64 m EOF else # Mark the 1st partition as (legacy) bootable (checked by RPi loader), since repartion removed it cat >> gdisk.tmp <<-'EOF' x a 1 2 64 m EOF fi # Convert GPT to hybrid GPT cat >> gdisk.tmp <<-'EOF' x r h 1 2 3 n c n 82 y 83 n w y EOF if [ "$is_firstboot" ]; then gdisk /dev/mmcblk0 < gdisk.tmp else gdisk /dev/loop0 < gdisk.tmp fi rm -f gdisk.tmp fi #========================================== # set certain dirs as nocow #------------------------------------------ function nocow() { [ -d $1 ] && chattr +C $i } for i in var/lib/mariadb var/lib/mysql var/lib/pgsql var/lib/libvirt/images; do nocow $i done #========================================== # copy Raspberry Pi firmware to EFI partition #------------------------------------------ if [ -f "boot/vc/bootcode.bin" -a "$is_efi" -a ! "$is_firstboot" ]; then echo "RPi EFI system, installing firmware on ESP" LINE=$(kpartx -asv $diskname | head -n1) PART=$(echo "$LINE" | awk '{print $3}') mkdir -p ./mnt-pi mount /dev/mapper/$PART ./mnt-pi ( cd boot/vc; tar c . ) | ( cd ./mnt-pi/; tar x ) umount ./mnt-pi rmdir ./mnt-pi # "kpartx -dv $diskname" does not work if $diskname # is longer than 64 characters LOOPDEV=$(echo "/dev/$PART" | sed 's/p[0-9][0-9]*$//') kpartx -dv $LOOPDEV losetup -d $LOOPDEV fi #========================================== # install MLO as raw #------------------------------------------ if [ -f "boot/MLO" ];then echo "Installing MLO (SPL)..." opt="count=1 seek=1 conv=notrunc" if ! dd if=boot/MLO of=$diskname bs=128k $opt; then echo "Couldn't install MLO on $diskname" exit 1 fi echo "Installing U-Boot..." opt="seek=1 conv=notrunc" if ! dd if=boot/u-boot.img of=$diskname bs=384k $opt; then echo "Couldn't install U-Boot on $diskname" exit 1 fi # /.../ # To avoid any issues when parted leaves x86 boot code # in the MBR we better clear that part of the image # ---- dd if=/dev/zero of=$diskname bs=440 count=1 conv=notrunc fi #========================================== # install Origen SPL & u-boot as raw #------------------------------------------ if [ -f "boot/origen-spl.bin" ];then echo "Installing SPL..." if ! dd if=boot/origen-spl.bin of=$diskname seek=1 conv=notrunc; then echo "Couldn't install SPL on $diskname" exit 1 fi echo "Installing U-Boot..." if ! dd if=boot/u-boot.bin of=$diskname seek=65 conv=notrunc; then echo "Couldn't install u-boot on $diskname" exit 1 fi fi #========================================== # install Odroid (exynos4) BL* & u-boot as raw #------------------------------------------ if [ -f "boot/E4412_S.bl1.HardKernel.bin" ];then echo "Installing BL1..." if ! dd if=boot/E4412_S.bl1.HardKernel.bin of=$diskname seek=1 conv=notrunc; then echo "Couldn't install BL1 on $diskname" exit 1 fi echo "Installing BL2..." if ! dd if=boot/bl2.signed.bin of=$diskname seek=31 conv=notrunc; then echo "Couldn't install BL2 on $diskname" exit 1 fi echo "Installing U-Boot..." if ! dd if=boot/u-boot.bin of=$diskname seek=63 conv=notrunc; then echo "Couldn't install u-boot on $diskname" exit 1 fi if ! dd if=boot/E4412_S.tzsw.signed.bin of=$diskname seek=2111 conv=notrunc; then echo "Couldn't install TrustZone S/W on $diskname" exit 1 fi fi #========================================== # install Odroid X3 (exynos5) BL* & u-boot as raw #------------------------------------------ if [ -f "boot/bl1.bin.hardkernel" ];then echo "Installing BL1..." if ! dd if=boot/bl1.bin.hardkernel of=$diskname seek=1 conv=notrunc; then echo "Couldn't install BL1 on $diskname" exit 1 fi echo "Installing BL2..." if ! dd if=boot/bl2.bin.hardkernel of=$diskname seek=31 conv=notrunc; then echo "Couldn't install BL2 on $diskname" exit 1 fi echo "Installing U-Boot..." if ! dd if=boot/u-boot.bin of=$diskname seek=63 conv=notrunc; then echo "Couldn't install u-boot on $diskname" exit 1 fi if ! dd if=boot/tzsw.bin.hardkernel of=$diskname seek=719 conv=notrunc; then echo "Couldn't install TrustZone S/W on $diskname" exit 1 fi fi #========================================== # install Arndale SPL & u-boot as raw #------------------------------------------ if [[ -f "boot/smdk5250-spl.bin" || -f "boot/arndale-spl.bin" ]];then echo "Installing BL1..." if ! dd if=boot/arndale-bl1.img of=$diskname seek=1 conv=notrunc; then echo "Couldn't install BL1 on $diskname" exit 1 fi echo "Installing SPL..." # Get SPL name (depends on u-boot version) SPL_FILE=$(ls boot/*-spl.bin); if ! dd if=$SPL_FILE of=$diskname seek=17 conv=notrunc; then echo "Couldn't install SPL ($SPL_FILE) on $diskname" exit 1 fi echo "Installing U-Boot..." if ! dd if=boot/u-boot.bin of=$diskname seek=49 conv=notrunc; then echo "Couldn't install u-boot on $diskname" exit 1 fi fi #========================================== # install Cubieboard/Cubietruck SPL & u-boot as raw #------------------------------------------ if [[ -f "boot/sunxi-spl.bin" || -f "boot/u-boot-sunxi-with-spl.bin" || -f "boot/pine64.img" ]];then if [ "$is_efi" ]; then # The GPT spans the first 33 sectors, but we need to write our # at sector 16. Shrink the GPT to only span 5 sectors # (16 partitions) to give us some space. echo -e 'x\ns\n16\nw\ny' > gdisk.tmp losetup /dev/loop3 $diskname dd if=/dev/loop3 of=mbrid.bin bs=1 skip=440 count=4 gdisk /dev/loop3 < gdisk.tmp dd of=/dev/loop3 if=mbrid.bin bs=1 seek=440 count=4 losetup -d /dev/loop3 rm -f mbrid.bin rm -f gdisk.tmp fi if [ -f "boot/u-boot-sunxi-with-spl.bin" ]; then echo "Installing All-in-one U-Boot/SPL..." if ! dd if=boot/u-boot-sunxi-with-spl.bin of=$diskname bs=1024 seek=8 conv=notrunc; then echo "Couldn't install SPL on $diskname" exit 1 fi elif [ -f "boot/pine64.img" ]; then echo "Installing All-in-one U-Boot/SPL..." if ! dd if=boot/pine64.img of=$diskname bs=1024 seek=8 skip=8 conv=notrunc; then echo "Couldn't install SPL on $diskname" exit 1 fi else echo "Installing SPL..." if ! dd if=boot/sunxi-spl.bin of=$diskname bs=1024 seek=8 conv=notrunc; then echo "Couldn't install SPL on $diskname" exit 1 fi echo "Installing U-Boot..." if ! dd if=boot/u-boot.img of=$diskname bs=1024 seek=40 conv=notrunc; then echo "Couldn't install u-boot on $diskname" exit 1 fi fi fi #========================================== # install Chromebook u-boot as boot kernel # And do the required magic! #------------------------------------------ if [ "$flavor" = "chromebook" ]; then if [ ! "$is_firstboot" ]; then pushd /usr/src/packages/KIWIROOT-oem/ echo "console=tty1 debug verbose" > /tmp/config ./usr/bin/vbutil_kernel --pack /tmp/newkern \ --keyblock ./usr/share/vboot/devkeys/kernel.keyblock \ --version 1 \ --signprivate ./usr/share/vboot/devkeys/kernel_data_key.vbprivk \ --config=/tmp/config --vmlinuz boot/u-boot.img --arch arm LINE=$(kpartx -asv $diskname | head -n1) PART=$(echo "$LINE" | awk '{print $3}') dd if=/tmp/newkern of=/dev/mapper/$PART # "kpartx -dv $diskname" does not work if $diskname is longer than 64 characters LOOPDEV=$(echo "/dev/$PART" | sed 's/p[0-9][0-9]*$//') kpartx -dv $LOOPDEV losetup -d $LOOPDEV fi # For build and after reaprtition occured on 1st boot: # Enable bootflag on partition 2 (u-boot now looks for bootscripts on bootable partitions only) parted $diskname set 2 boot on # CGPT magic ./usr/bin/cgpt add -t kernel -i 1 -S 1 -T 5 -P 10 -l U-BOOT $diskname popd fi #========================================== # install i.MX u-boot as raw #------------------------------------------ if [ -f "boot/u-boot.imx" ];then if [ ! "$is_firstboot" ]; then pushd /usr/src/packages/KIWIROOT-oem/ else pushd / fi echo "Installing U-Boot..." if ! dd if=boot/u-boot.imx of=$diskname bs=512 seek=2 conv=notrunc; then echo "Couldn't install u-boot on $diskname" exit 1 fi popd fi #========================================== # install Cubox-i SPL & u-boot as raw #------------------------------------------ if [ -f "boot/cuboxi-spl.bin" ];then echo "Installing SPL..." if ! dd if=boot/cuboxi-spl.bin of=$diskname bs=1024 seek=1 conv=notrunc; then echo "Couldn't install SPL on $diskname" exit 1 fi echo "Installing U-Boot..." if ! dd if=boot/u-boot.img of=$diskname bs=1024 seek=69 conv=notrunc; then echo "Couldn't install u-boot on $diskname" exit 1 fi fi ) if [ "$is_firstboot" ]; then for file in /etc/sysconfig/bootloader /etc/default/grub; do # On second boot, the rootfs is no longer tmpfs and dracut would interpret the # command line argument, remove it again from the config [ -e "$file" ] && sed -i -e 's/rootflags=size=100%//' $file # Make 2nd boot quieter since we already succeeded booting :-) [ -e "$file" ] && sed -i -e 's/loglevel=3/quiet/' $file done # Fix up grub2 efi installation on 32bit arm (shouldn't hurt elsewhere) if grep -q boot/efi /etc/fstab; then mkdir -p /boot/efi mount /boot/efi /sbin/update-bootloader --reinit fi else # Install a startup.nsh file so we boot automatically via the EFI shell if [ -f boot/grub2/*efi/grub.efi -o -f ./EFI/BOOT/boot*.efi ];then echo "EFI system, installing startup.nsh" LINE=$(kpartx -asv $diskname | head -n1) PART=$(echo "$LINE" | awk '{print $3}') mkdir ./mnt mount /dev/mapper/$PART ./mnt if [ -f boot/grub2/arm-efi/grub.efi ]; then echo "bootarm" > mnt/startup.nsh else echo "bootaa64" > mnt/startup.nsh fi umount ./mnt rmdir ./mnt # "kpartx -dv $diskname" does not work if $diskname # is longer than 64 characters LOOPDEV=$(echo "/dev/$PART" | sed 's/p[0-9][0-9]*$//') kpartx -dv $LOOPDEV losetup -d $LOOPDEV fi fi #========================================== # u-boot can not handle 64bit filesystems right now, so we convert # back to 32bit #------------------------------------------ if ! [ "$is_firstboot" ]; then echo "APPLYING WORKAROUND FOR https://bugzilla.suse.com/show_bug.cgi?id=989284" for part in $(kpartx -asv $diskname | awk '{print $3}'); do fs=/dev/mapper/$part if tune2fs -l $fs 2>/dev/null | grep -q 64bit; then echo "partition $part seems to be affected" tune2fs -O ^64bit $fs e2fsck -f -y $fs resize2fs -s $fs fi done for loop in $(losetup -j $diskname | cut -d: -f1); do kpartx -dv $loop losetup -d $loop done fi
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor