Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
openSUSE:Leap:42.2:Ports
raspberrypi-firmware
config-rpi3.txt
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File config-rpi3.txt of Package raspberrypi-firmware
# Get more options/information on http://elinux.org/RPiconfig # or on https://www.raspberrypi.org/documentation/configuration/config-txt.md # Our kernels are located on a Linux partition. Chainload U-Boot to load them. kernel=u-boot.bin # Use 64 MB for GPU for RPi with 256 MB (Min 16 - Max 192 MB) gpu_mem_256=64 # Use 64 MB for GPU for RPi with 512 MB (Min 16 - Max 448 MB) gpu_mem_512=64 # Use 128 MB for GPU for RPi with 1024 MB (Min 16 - Max 944 MB) gpu_mem_1024=128 # Turbo mode: 0 = enable dynamic freq/voltage - 1 = always max force_turbo=0 # Start in turbo mode for 30 seconds or until cpufreq sets a frequency initial_turbo=30 # DO NOT overvoltage manually to not void warranty! over_voltage=0 # Boot in AArch64 (64-bit) mode arm_control=0x200 # Fix mini UART input frequency, and setup/enable up the UART. enable_uart=1 # Disable warning overlays as they don't work well together with linux's graphical output avoid_warnings=1
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
