openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File esound.init of Package esound

#! /bin/sh
# Copyright (c) 1995-2002, 2008 SUSE Linux Products GmbH, Nuernberg, Germany.
# All rights reserved.
#
# Author: Stanislav Brabec <sbrabec@suse.cz>
#
# /etc/init.d/esound
#   and its symbolic link
# /usr/sbin/rcesound
#
# Template system startup script for some example service/daemon esound
#
# LSB compatible service control script; see http://www.linuxbase.org/spec/
# 
# Note: This template uses functions rc_XXX defined in /etc/rc.status on
# UnitedLinux (UL) based Linux distributions. If you want to base your 
# script on this template and ensure that it works on non UL based LSB 
# compliant Linux distributions, you either have to provide the rc.status
# functions from UL or change the script to work without them.
#
### BEGIN INIT INFO
# Provides:          esound
# Required-Start:    alsasound $remote_fs
# Should-Start:      $network $portmap
# Required-Stop:     alsasound $remote_fs
# Should-Stop:       $network $portmap
# Default-Start:     5
# Default-Stop:      
# Short-Description: Sound daemon with network support
# Description:       Starts esound server to allow remote access to sound
#	card. To use esound locally, you do not need to start
#	this server on boot. You should edit server settings before 
#	starting it via sysconfig editor: Network/Sound/Esound
### END INIT INFO

# Check for missing binaries (stale symlinks should not happen)
ESD_BIN=/usr/bin/esd
test -x $ESD_BIN || exit 5

# Check for existence of needed config file and read it
ESD_CONFIG=/etc/sysconfig/esound
test -r $ESD_CONFIG || exit 6
. $ESD_CONFIG
ESD_ARGS=
test "$ESD_BEEPS" = "no" && ESD_ARGS=-nobeeps
test "$ESD_AS" != "-1" && ESD_ARGS="$ESD_ARGS -as $ESD_AS"
test "$ESD_UNIX" = "yes" && ESD_ARGS="$ESD_ARGS -unix"
test "$ESD_TCP" = "yes" && ESD_ARGS="$ESD_ARGS -tcp"
test "$ESD_PUBLIC" = "yes" && ESD_ARGS="$ESD_ARGS -public"
test -z "$ESD_BIND" || ESD_ARGS="$ESD_ARGS -bind $ESD_BIND"
ESD_ARGS="$ESD_ARGS $ESD_OPTIONS"

# Source LSB init functions
# providing start_daemon, killproc, pidofproc, 
# log_success_msg, log_failure_msg and log_warning_msg.
# This is currently not used by UnitedLinux based distributions and
# not needed for init scripts for UnitedLinux only. If it is used,
# the functions from rc.status should not be sourced or used.
#. /lib/lsb/init-functions

# Shell functions sourced from /etc/rc.status:
#      rc_check         check and set local and overall rc status
#      rc_status        check and set local and overall rc status
#      rc_status -v     be verbose in local rc status and clear it afterwards
#      rc_status -v -r  ditto and clear both the local and overall rc status
#      rc_status -s     display "skipped" and exit with status 3
#      rc_status -u     display "unused" and exit with status 3
#      rc_failed        set local and overall rc status to failed
#      rc_failed <num>  set local and overall rc status to <num>
#      rc_reset         clear both the local and overall rc status
#      rc_exit          exit appropriate to overall rc status
#      rc_active        checks whether a service is activated by symlinks
#      rc_splash arg    sets the boot splash screen to arg (if active)
. /etc/rc.status

# Reset status of this service
rc_reset

# Return values acc. to LSB for all commands but status:
# 0	  - success
# 1       - generic or unspecified error
# 2       - invalid or excess argument(s)
# 3       - unimplemented feature (e.g. "reload")
# 4       - user had insufficient privileges
# 5       - program is not installed
# 6       - program is not configured
# 7       - program is not running
# 8--199  - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
# 
# Note that starting an already running service, stopping
# or restarting a not-running service as well as the restart
# with force-reload (in case signaling is not supported) are
# considered a success.

case "$1" in
    start)
	echo -n "Starting esound "
	if grep -q '^default_options=.*-terminate' /etc/esd.conf
	then
	    echo -n "To run as persistent daemon, you must not have -terminate in default_options in /etc/esd.conf!"
	    rc_failed 1
	else
	    ## Start daemon with startproc(8). If this fails
	    ## the return value is set appropriately by startproc.
	    startproc $ESD_BIN $ESD_ARGS >/dev/null 2>&1
	fi

# Remember status and be verbose
	rc_status -v
	;;
    stop)
	echo -n "Shutting down esound "
	## Stop daemon with killproc(8) and if this fails
	## killproc sets the return value according to LSB.

killproc -TERM $ESD_BIN

# Remember status and be verbose
	rc_status -v
	;;
    try-restart)
	## Do a restart only if the service was active before.
	## Note: try-restart is not (yet) part of LSB (as of 1.2)
	$0 status >/dev/null &&  $0 restart

# Remember status and be quiet
	rc_status
	;;
    restart)
	## Stop the service and regardless of whether it was
	## running or not, start it again.
	$0 stop
	$0 start

# Remember status and be quiet
	rc_status
	;;
    force-reload)
	## Signal the daemon to reload its config. Most daemons
	## do this on signal 1 (SIGHUP).
	## If it does not support it, restart.

echo -n "Reload service esound "
	## if it supports it:
	killproc -HUP $ESD_BIN
	touch /var/run/esd.pid
	rc_status -v

## Otherwise:
	#$0 stop  &&  $0 start
	#rc_status
	;;
    reload)
	## Like force-reload, but if daemon does not support
	## signaling, do nothing (!)

# If it supports signaling:
	echo -n "Reload service esound "
	killproc -HUP $ESD_BIN
	touch /var/run/esd.pid
	rc_status -v
	
	## Otherwise if it does not support reload:
	#rc_failed 3
	#rc_status -v
	;;
    status)
	echo -n "Checking for service esound "
	## Check status with checkproc(8), if process is running
	## checkproc will return with exit status 0.

# Return value is slightly different for the status command:
	# 0 - service up and running
	# 1 - service dead, but /var/run/  pid  file exists
	# 2 - service dead, but /var/lock/ lock file exists
	# 3 - service not running (unused)
	# 4 - service status unknown :-(
	# 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.)
	
	# NOTE: checkproc returns LSB compliant status values.
	checkproc $ESD_BIN
	# NOTE: rc_status knows that we called this init script with
	# "status" option and adapts its messages accordingly.
	rc_status -v
	;;
    probe)
	## Optional: Probe for the necessity of a reload, print out the
	## argument to this init script which is required for a reload.
	## Note: probe is not (yet) part of LSB (as of 1.2)

test /etc/sysconfig/esound -nt /var/run/esd.pid && echo reload
	;;
    *)
	echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}"
	exit 1
	;;
esac
rc_exit

Places

File esound.init of Package esound

Places