File gnuplot-5.2.0-texi2info.patch of Package gnuplot.openSUSE_Leap_15.2_Update

Overview Repositories Revisions Requests Users Attributes Meta

File gnuplot-5.2.0-texi2info.patch of Package gnuplot.openSUSE_Leap_15.2_Update

--- gnuplot.texi
+++ gnuplot.texi	2017-09-29 07:05:15.168397901 +0000
@@ -1703,7 +1703,6 @@ third kind. See `elliptic integrals` for
 @findex besj0
 
 
-@item
 esj0(x) & int or real &  $J_@{0@}$ Bessel function of $x$, in radians \\
 The `besj0(x)` function returns the J0th Bessel function of its argument.
 @ref{besj0} expects its argument to be in radians.
@@ -1716,7 +1715,6 @@ The `besj0(x)` function returns the J0th
 @findex besj1
 
 
-@item
 esj1(x) & int or real & $J_@{1@}$ Bessel function of $x$, in radians \\
 The `besj1(x)` function returns the J1st Bessel function of its argument.
 @ref{besj1} expects its argument to be in radians.
@@ -1729,7 +1727,6 @@ The `besj1(x)` function returns the J1st
 @findex besy0
 
 
-@item
 esy0(x) & int or real & $Y_@{0@}$ Bessel function of $x$, in radians \\
 The `besy0(x)` function returns the Y0th Bessel function of its argument.
 @ref{besy0} expects its argument to be in radians.
@@ -1742,7 +1739,6 @@ The `besy0(x)` function returns the Y0th
 @findex besy1
 
 
-@item
 esy1(x) & int or real & $Y_@{1@}$ Bessel function of $x$, in radians \\
 The `besy1(x)` function returns the Y1st Bessel function of its argument.
 @ref{besy1} expects its argument to be in radians.
@@ -10624,8 +10620,7 @@ but
 @end example
 
 See also
-@uref{http://www.gnuplot.info/demo/poldat.html,poldat.dem: polar plot using @ref{angles} demo.
-}
+@uref{http://www.gnuplot.info/demo/poldat.html,poldat.dem}: polar plot using @ref{angles} demo.
 
 @node arrow, autoscale, angles, set-show
 @subsection arrow
@@ -11009,7 +11004,6 @@ entries from the following table:
            4096   polar       no effect
 @end example
 
-@item
 it & plot & splot \\ \hline
 
 
@@ -21207,13 +21201,10 @@ Syntax:
                         @{[no]enhanced@}
 @end example
 
-@end itemizeif
 @example
                         @{mono|ansi|ansi256|ansirgb@}
 @end example
 
-@end itemizeif
-
 where <xchars> and <ychars> set the size of the text block. The default is
 79 by 24. The last newline is printed only if `feed` is enabled.
 
@@ -21251,7 +21242,6 @@ See also e.g. the description at
 @uref{https://en.wikipedia.org/wiki/ANSI_escape_code#Colors,https://en.wikipedia.org/wiki/ANSI_escape_code#Colors
 }
 
-@end itemizeif
 Example:
 @example
       set term dumb mono size 60,15 aspect 1
@@ -21623,8 +21613,6 @@ Preferred combinations are `medium norma
 
 With each of these drivers, a binary copy is required on a PC to print.
 Do not use `print`---use instead `copy file /b lpt1:`.
-@end itemizeif
-
 
 @node excl, fig, epson_180dpi, complete_list_of_terminals
 @subsection excl
@@ -22423,8 +22411,6 @@ the environmental variable GNUPLOT_LUA_D
 All arguments will be provided to the selected script for further
 evaluation. E.g. 'set term lua tikz help' will cause the script itself
 to print additional help on options and choices for the script.
-@end itemizeif
-
 
 @node mf, mp, lua, complete_list_of_terminals
 @subsection mf
@@ -23118,7 +23104,6 @@ terminals.  It has no options."
 @c ?term km-tek40xx
 @cindex km-tek40xx
 
-@end itemizeif
 @c ?commands set terminal selanar
 @c ?set terminal selanar
 @c ?set term selanar
@@ -23126,7 +23111,6 @@ terminals.  It has no options."
 @c ?term selanar
 @cindex selanar
 
-@end itemizeif
 @c ?commands set terminal sixel
 @c ?set terminal sixel
 @c ?set term sixel
@@ -23147,7 +23131,6 @@ For use with xterm emulation, xterm must
 "--enable-sixel-graphics" and started with "-ti 340" on the command line.
 Menu option "sixelScrolling" should be selected. xterm/vt340 emulation
 limits plots to 16 simultaneous colors, but other emulators may permit more.
-@end itemizeif
 @c ?commands set terminal bitgraph
 @c ?set terminal bitgraph
 @c ?set term bitgraph
@@ -23155,7 +23138,6 @@ limits plots to 16 simultaneous colors,
 @c ?term bitgraph
 @cindex bitgraph
 
-@end itemizeif
 This family of terminal drivers supports a variety of VT-like terminals.
 `tek40xx` supports Tektronix 4010 and others as well as most TEK emulators.
 `vttek` supports VT-like tek40xx terminal emulators.
@@ -23536,7 +23518,6 @@ Syntax:
                 [dump "file"] \\
 @end example
 
-@end itemizeif
 @example
                 [mode]
 
@@ -23556,7 +23537,6 @@ If this option is present, (i.e the dump
 the key KP_Delete will write the file.  This action cannot and cannot be
 rebound. The file is written in raw ppm (P6) format. Note that this option
 is reset each time the `set term` command is issued.
-@end itemizeif
 
 To get high resolution modes, you will probably have to modify the
 configuration file of libvga, usually /etc/vga/libvga.conf.  Using
@@ -23762,7 +23742,6 @@ of an additional redraw after releasing
 
 `Line Styles...` allows customization of the line colors and styles.
 
-@end itemizeif
 `Update wgnuplot.ini` saves the current window locations, window sizes, text
 window font, text window font size, graph window font, graph window font
 size, background color to the initialization file `wgnuplot.ini`.
@@ -23928,8 +23907,6 @@ This file is located in the user's appli
       Line5=0 0 128 0 4
 @end example
 
-@end itemizeif
-
 @c ^ <h3>Text window options</h3> 
 
 These settings apply to the wgnuplot text-window only."
@@ -23966,7 +23943,6 @@ solid line in color mode, or a dashed li
 line width is 1 pixel.  If `Linestyle` is negative, it specifies the width of
 a SOLID line in pixels.  Line1 and any linestyle used with the `points` style
 must be SOLID with unit width.
-@end itemizeif
 
 See `graph-menu`."
 
@@ -24354,13 +24330,10 @@ later by `set term x11 [no]raise [no]per
  `-ctrlq   ` closes window on ctrl-q rather than q
 @end example
 
-@end itemizeif
 @example
  `-persist`  plot windows survive after main gnuplot program exits
 @end example
 
-@end itemizeif
-
 @cindex X resources
 
 The options are shown above in their command-line syntax.  When entered as

Places

File gnuplot-5.2.0-texi2info.patch of Package gnuplot.openSUSE_Leap_15.2_Update

Places