File clamav-conf.patch of Package clamav.openSUSE_Leap_42.1_Update
Index: clamav-0.98.3/etc/clamav-milter.conf.sample =================================================================== --- clamav-0.98.3.orig/etc/clamav-milter.conf.sample 2014-05-06 20:39:56.000000000 +0200 +++ clamav-0.98.3/etc/clamav-milter.conf.sample 2014-05-08 16:42:14.865949467 +0200 @@ -2,10 +2,6 @@ ## Example config file for clamav-milter ## -# Comment or remove the line below. -Example - - ## ## Main options ## @@ -17,8 +13,7 @@ # inet6:port@[hostname|ip-address] - to specify an ipv6 socket # # Default: no default -#MilterSocket /tmp/clamav-milter.socket -#MilterSocket inet:7357 +MilterSocket /var/run/clamav/clamav-milter-socket # Define the group ownership for the (unix) milter socket. # Default: disabled (the primary group of the user running clamd) @@ -36,7 +31,7 @@ # Run as another user (clamav-milter must be started by root for this option to work) # # Default: unset (don't drop privileges) -#User clamav +User vscan # Initialize supplementary group access (clamav-milter must be started by root). # @@ -64,7 +59,7 @@ # daemon (main thread). # # Default: disabled -#PidFile /var/run/clamav-milter.pid +PidFile /var/run/clamav/clamav-milter.pid # Optional path to the global temporary directory. # Default: system specific (usually /tmp or /var/tmp). @@ -90,7 +85,7 @@ # with the same socket: clamd servers will be selected in a round-robin fashion. # # Default: no default -#ClamdSocket tcp:scanner.mydomain:7357 +ClamdSocket unix:/var/run/clamav/clamd-socket ## @@ -239,13 +234,13 @@ # Use system logger (can work together with LogFile). # # Default: no -#LogSyslog yes +LogSyslog yes # Specify the type of syslog messages - please refer to 'man syslog' # for facility names. # # Default: LOG_LOCAL6 -#LogFacility LOG_MAIL +LogFacility LOG_MAIL # Enable verbose logging. # Index: clamav-0.98.3/etc/clamd.conf.sample =================================================================== --- clamav-0.98.3.orig/etc/clamd.conf.sample 2014-05-08 16:42:07.318862339 +0200 +++ clamav-0.98.3/etc/clamd.conf.sample 2014-05-08 16:45:03.177891683 +0200 @@ -1,12 +1,8 @@ ## -## Example config file for the Clam AV daemon +## Config file for the Clam AV daemon ## Please read the clamd.conf(5) manual before editing this file. ## - -# Comment or remove the line below. -Example - # Uncomment this option to enable logging. # LogFile must be writable for the user running daemon. # A full path is required. @@ -41,12 +37,12 @@ # Use system logger (can work together with LogFile). # Default: no -#LogSyslog yes +LogSyslog yes # Specify the type of syslog messages - please refer to 'man syslog' # for facility names. # Default: LOG_LOCAL6 -#LogFacility LOG_MAIL +LogFacility LOG_MAIL # Enable verbose logging. # Default: no @@ -63,7 +59,7 @@ # This option allows you to save a process identifier of the listening # daemon (main thread). # Default: disabled -#PidFile /var/run/clamd.pid +PidFile /var/run/clamav/clamd.pid # Optional path to the global temporary directory. # Default: system specific (usually /tmp or /var/tmp). @@ -82,7 +78,7 @@ # Path to a local socket file the daemon will listen on. # Default: disabled (must be specified by a user) -#LocalSocket /tmp/clamd.socket +LocalSocket /var/run/clamav/clamd-socket # Sets the group ownership on the unix socket. # Default: disabled (the primary group of the user running clamd) @@ -98,7 +94,7 @@ # TCP port address. # Default: no -#TCPSocket 3310 +TCPSocket 3310 # TCP address. # By default we bind to INADDR_ANY, probably not wise. @@ -106,7 +102,7 @@ # from the outside world. This option can be specified multiple # times if you want to listen on multiple IPs. IPv6 is now supported. # Default: no -#TCPAddr 127.0.0.1 +TCPAddr 127.0.0.1 # Maximum length the queue of pending connections may grow to. # Default: 200 @@ -192,7 +188,7 @@ # Run as another user (clamd must be started by root for this option to work) # Default: don't drop privileges -#User clamav +User vscan # Initialize supplementary group access (clamd must be started by root). # Default: no @@ -525,6 +521,10 @@ ## ## On-access Scan Settings ## +# +# When enabling this, you most probably have to set "User root" above, +# so that clamav can access the files to be scanned. +# # Enable on-access scanning. Currently, this is supported via fanotify. # Clamuko/Dazuko support has been deprecated. Index: clamav-0.98.3/etc/freshclam.conf.sample =================================================================== --- clamav-0.98.3.orig/etc/freshclam.conf.sample 2014-05-08 16:42:07.349862696 +0200 +++ clamav-0.98.3/etc/freshclam.conf.sample 2014-05-08 16:42:14.866949479 +0200 @@ -1,12 +1,8 @@ ## -## Example config file for freshclam +## Config file for freshclam ## Please read the freshclam.conf(5) manual before editing this file. ## - -# Comment or remove the line below. -Example - # Path to the database directory. # WARNING: It must match clamd.conf's directive! # Default: hardcoded (depends on installation options) @@ -35,12 +31,12 @@ # Use system logger (can work together with UpdateLogFile). # Default: no -#LogSyslog yes +LogSyslog yes # Specify the type of syslog messages - please refer to 'man syslog' # for facility names. # Default: LOG_LOCAL6 -#LogFacility LOG_MAIL +LogFacility LOG_MAIL # Enable log rotation. Always enabled when LogFileMaxSize is enabled. # Default: no @@ -48,12 +44,12 @@ # This option allows you to save the process identifier of the daemon # Default: disabled -#PidFile /var/run/freshclam.pid +PidFile /var/run/clamav/freshclam.pid # By default when started freshclam drops privileges and switches to the # "clamav" user. This directive allows you to change the database owner. # Default: clamav (may depend on installation options) -#DatabaseOwner clamav +DatabaseOwner vscan # Initialize supplementary group access (freshclam must be started by root). # Default: no @@ -136,7 +132,7 @@ # Send the RELOAD command to clamd. # Default: no -#NotifyClamd /path/to/clamd.conf +NotifyClamd /etc/clamd.conf # Run command after successful database update. # Default: disabled @@ -179,7 +175,7 @@ # detected in the field and in what geographic area they are. # Freshclam will connect to clamd in order to get recent statistics. # Default: no -#SubmitDetectionStats /path/to/clamd.conf +#SubmitDetectionStats /etc/clamd.conf # Country of origin of malware/detection statistics (for statistical # purposes only). The statistics collector at ClamAV.net will look up
