File hostapd-2.6-defconfig.patch of Package hostapd.openSUSE_Leap_42.3_Update

--- hostapd/defconfig.orig	2016-10-02 19:51:11.000000000 +0100
+++ hostapd/defconfig	2016-10-04 11:15:48.548609106 +0100
@@ -31,7 +31,7 @@
 #CONFIG_LIBNL20=y
 
 # Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
-#CONFIG_LIBNL32=y
+CONFIG_LIBNL32=y
 
 
 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
@@ -42,7 +42,7 @@
 #LIBS_c += -L/usr/local/lib
 
 # Driver interface for no driver (e.g., RADIUS server only)
-#CONFIG_DRIVER_NONE=y
+CONFIG_DRIVER_NONE=y
 
 # IEEE 802.11F/IAPP
 CONFIG_IAPP=y
@@ -81,53 +81,53 @@
 CONFIG_EAP_TTLS=y
 
 # EAP-SIM for the integrated EAP server
-#CONFIG_EAP_SIM=y
+CONFIG_EAP_SIM=y
 
 # EAP-AKA for the integrated EAP server
-#CONFIG_EAP_AKA=y
+CONFIG_EAP_AKA=y
 
 # EAP-AKA' for the integrated EAP server
 # This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
+CONFIG_EAP_AKA_PRIME=y
 
 # EAP-PAX for the integrated EAP server
-#CONFIG_EAP_PAX=y
+CONFIG_EAP_PAX=y
 
 # EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
+CONFIG_EAP_PSK=y
 
 # EAP-pwd for the integrated EAP server (secure authentication with a password)
-#CONFIG_EAP_PWD=y
+CONFIG_EAP_PWD=y
 
 # EAP-SAKE for the integrated EAP server
-#CONFIG_EAP_SAKE=y
+CONFIG_EAP_SAKE=y
 
 # EAP-GPSK for the integrated EAP server
-#CONFIG_EAP_GPSK=y
+CONFIG_EAP_GPSK=y
 # Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
+CONFIG_EAP_GPSK_SHA256=y
 
 # EAP-FAST for the integrated EAP server
 # Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
 # for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
 # with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
-#CONFIG_EAP_FAST=y
+CONFIG_EAP_FAST=y
 
 # Wi-Fi Protected Setup (WPS)
-#CONFIG_WPS=y
+CONFIG_WPS=y
 # Enable UPnP support for external WPS Registrars
-#CONFIG_WPS_UPNP=y
+CONFIG_WPS_UPNP=y
 # Enable WPS support with NFC config method
-#CONFIG_WPS_NFC=y
+CONFIG_WPS_NFC=y
 
 # EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
+CONFIG_EAP_IKEV2=y
 
 # Trusted Network Connect (EAP-TNC)
-#CONFIG_EAP_TNC=y
+CONFIG_EAP_TNC=y
 
 # EAP-EKE for the integrated EAP server
-#CONFIG_EAP_EKE=y
+CONFIG_EAP_EKE=y
 
 # PKCS#12 (PFX) support (used to read private key and certificate file from
 # a file that usually has extension .p12 or .pfx)
@@ -135,27 +135,27 @@
 
 # RADIUS authentication server. This provides access to the integrated EAP
 # server from external hosts using RADIUS.
-#CONFIG_RADIUS_SERVER=y
+CONFIG_RADIUS_SERVER=y
 
 # Build IPv6 support for RADIUS operations
 CONFIG_IPV6=y
 
 # IEEE Std 802.11r-2008 (Fast BSS Transition)
-#CONFIG_IEEE80211R=y
+CONFIG_IEEE80211R=y
 
 # Use the hostapd's IEEE 802.11 authentication (ACL), but without
 # the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
-#CONFIG_DRIVER_RADIUS_ACL=y
+CONFIG_DRIVER_RADIUS_ACL=y
 
 # IEEE 802.11n (High Throughput) support
-#CONFIG_IEEE80211N=y
+CONFIG_IEEE80211N=y
 
 # Wireless Network Management (IEEE Std 802.11v-2011)
 # Note: This is experimental and not complete implementation.
-#CONFIG_WNM=y
+CONFIG_WNM=y
 
 # IEEE 802.11ac (Very High Throughput) support
-#CONFIG_IEEE80211AC=y
+CONFIG_IEEE80211AC=y
 
 # Remove debugging code that is printing out debug messages to stdout.
 # This can be used to reduce the size of the hostapd considerably if debugging
@@ -183,7 +183,7 @@
 
 # Enable support for fully dynamic VLANs. This enables hostapd to
 # automatically create bridge and VLAN interfaces if necessary.
-#CONFIG_FULL_DYNAMIC_VLAN=y
+CONFIG_FULL_DYNAMIC_VLAN=y
 
 # Use netlink-based kernel API for VLAN operations instead of ioctl()
 # Note: This requires libnl 3.1 or newer.
@@ -257,16 +257,16 @@
 # gnutls = GnuTLS
 # internal = Internal TLSv1 implementation (experimental)
 # none = Empty template
-#CONFIG_TLS=openssl
+CONFIG_TLS=openssl
 
 # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
 # can be enabled to get a stronger construction of messages when block ciphers
 # are used.
-#CONFIG_TLSV11=y
+CONFIG_TLSV11=y
 
 # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
 # can be enabled to enable use of stronger crypto algorithms.
-#CONFIG_TLSV12=y
+CONFIG_TLSV12=y
 
 # If CONFIG_TLS=internal is used, additional library and include paths are
 # needed for LibTomMath. Alternatively, an integrated, minimal version of
@@ -287,19 +287,19 @@
 # Interworking (IEEE 802.11u)
 # This can be used to enable functionality to improve interworking with
 # external networks.
-#CONFIG_INTERWORKING=y
+CONFIG_INTERWORKING=y
 
 # Hotspot 2.0
-#CONFIG_HS20=y
+CONFIG_HS20=y
 
 # Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
-#CONFIG_SQLITE=y
+CONFIG_SQLITE=y
 
 # Enable Fast Session Transfer (FST)
-#CONFIG_FST=y
+CONFIG_FST=y
 
 # Enable CLI commands for FST testing
-#CONFIG_FST_TEST=y
+CONFIG_FST_TEST=y
 
 # Testing options
 # This can be used to enable some testing options (see also the example
@@ -331,12 +331,12 @@
 # For more details refer to:
 # http://wireless.kernel.org/en/users/Documentation/acs
 #
-#CONFIG_ACS=y
+CONFIG_ACS=y
 
 # Multiband Operation support
 # These extentions facilitate efficient use of multiple frequency bands
 # available to the AP and the devices that may associate with it.
-#CONFIG_MBO=y
+CONFIG_MBO=y
 
 # Client Taxonomy
 # Has the AP retain the Probe Request and (Re)Association Request frames from
openSUSE Build Service is sponsored by