File pygrub-python3-conversion.patch of Package xen.11173
Index: xen-4.10.0-testing/tools/pygrub/src/pygrub
===================================================================
--- xen-4.10.0-testing.orig/tools/pygrub/src/pygrub
+++ xen-4.10.0-testing/tools/pygrub/src/pygrub
@@ -1,4 +1,4 @@
-#! /usr/bin/env python
+#!/usr/bin/python3
#
# pygrub - simple python-based bootloader for Xen
#
@@ -18,7 +18,8 @@ import logging
import platform
import xen.lowlevel.xc
-import curses, _curses, curses.wrapper, curses.textpad, curses.ascii
+import curses, _curses, curses.textpad, curses.ascii
+from curses import wrapper
import getopt
import fsimage
@@ -51,7 +52,7 @@ def enable_cursor(ison):
except _curses.error:
pass
-DISK_TYPE_RAW, DISK_TYPE_HYBRIDISO, DISK_TYPE_DOS = range(3)
+DISK_TYPE_RAW, DISK_TYPE_HYBRIDISO, DISK_TYPE_DOS = list(range(3))
def identify_disk_image(file):
"""Detect DOS partition table or HybridISO format."""
fd = os.open(file, os.O_RDONLY)
@@ -78,7 +79,7 @@ def get_solaris_slice(file, offset):
buf = os.read(fd, 512)
os.close(fd)
if struct.unpack("<H", buf[508:510])[0] != DKL_MAGIC:
- raise RuntimeError, "Invalid disklabel magic"
+ raise RuntimeError("Invalid disklabel magic")
nslices = struct.unpack("<H", buf[30:32])[0]
@@ -89,7 +90,7 @@ def get_solaris_slice(file, offset):
if slicetag == V_ROOT:
return slicesect * SECTOR_SIZE
- raise RuntimeError, "No root slice found"
+ raise RuntimeError("No root slice found")
def get_fs_offset_gpt(file):
fd = os.open(file, os.O_RDONLY)
@@ -424,20 +425,17 @@ class Grub:
we're being given a raw config file rather than a disk image."""
if not os.access(fn, os.R_OK):
- raise RuntimeError, "Unable to access %s" %(fn,)
+ raise RuntimeError("Unable to access %s" %(fn,))
- cfg_list = map(lambda x: (x,grub.GrubConf.Grub2ConfigFile),
- ["/boot/grub/grub.cfg", "/grub/grub.cfg",
- "/boot/grub2/grub.cfg", "/grub2/grub.cfg"]) + \
- map(lambda x: (x,grub.ExtLinuxConf.ExtLinuxConfigFile),
- ["/boot/isolinux/isolinux.cfg",
+ cfg_list = [(x,grub.GrubConf.Grub2ConfigFile) for x in ["/boot/grub/grub.cfg", "/grub/grub.cfg",
+ "/boot/grub2/grub.cfg", "/grub2/grub.cfg"]] + \
+ [(x,grub.ExtLinuxConf.ExtLinuxConfigFile) for x in ["/boot/isolinux/isolinux.cfg",
"/boot/extlinux/extlinux.conf",
"/boot/extlinux.conf",
"/extlinux/extlinux.conf",
- "/extlinux.conf"]) + \
- map(lambda x: (x,grub.GrubConf.GrubConfigFile),
- ["/boot/grub/menu.lst", "/boot/grub/grub.conf",
- "/grub/menu.lst", "/grub/grub.conf"])
+ "/extlinux.conf"]] + \
+ [(x,grub.GrubConf.GrubConfigFile) for x in ["/boot/grub/menu.lst", "/boot/grub/grub.conf",
+ "/grub/menu.lst", "/grub/grub.conf"]]
if not fs:
# set the config file and parse it
@@ -449,7 +447,7 @@ class Grub:
for f,parser in cfg_list:
if fs.file_exists(f):
- print >>sys.stderr, "Using %s to parse %s" % (parser,f)
+ print("Using %s to parse %s" % (parser,f), file=sys.stderr)
self.cf = parser()
self.cf.filename = f
break
@@ -459,7 +457,7 @@ class Grub:
# limit read size to avoid pathological cases
buf = f.read(FS_READ_MAX)
del f
- self.cf.parse(buf)
+ self.cf.parse(buf.decode())
def image_index(self):
if isinstance(self.cf.default, int):
@@ -603,7 +601,7 @@ class Grub:
def get_entry_idx(cf, entry):
# first, see if the given entry is numeric
try:
- idx = string.atoi(entry)
+ idx = int(entry)
return idx
except ValueError:
pass
@@ -636,21 +634,21 @@ def run_grub(file, entry, fs, cfg_args):
chosencfg["args"] = cfg_args
return chosencfg
if g.__dict__.get('cf', None) is None:
- raise RuntimeError, "couldn't find bootloader config file in the image provided."
+ raise RuntimeError("couldn't find bootloader config file in the image provided.")
else:
return
if list_entries:
for i in range(len(g.cf.images)):
img = g.cf.images[i]
- print "title: %s" % img.title
- print " root: %s" % img.root
- print " kernel: %s" % img.kernel[1]
- print " args: %s" % img.args
- print " initrd: %s" % img.initrd[1]
+ print("title: %s" % img.title)
+ print(" root: %s" % img.root)
+ print(" kernel: %s" % img.kernel[1])
+ print(" args: %s" % img.args)
+ print(" initrd: %s" % img.initrd[1])
if interactive and not list_entries:
- curses.wrapper(run_main)
+ wrapper(run_main)
else:
sel = g.image_index()
@@ -661,7 +659,7 @@ def run_grub(file, entry, fs, cfg_args):
sel = idx
if sel == -1:
- print "No kernel image selected!"
+ print("No kernel image selected!")
sys.exit(1)
try:
@@ -759,7 +757,7 @@ def format_sxp(kernel, ramdisk, args):
def format_simple(kernel, ramdisk, args, sep):
for check in (kernel, ramdisk, args):
if check is not None and sep in check:
- raise RuntimeError, "simple format cannot represent delimiter-containing value"
+ raise RuntimeError("simple format cannot represent delimiter-containing value")
s = ("kernel %s" % kernel) + sep
if ramdisk:
s += ("ramdisk %s" % ramdisk) + sep
@@ -772,7 +770,7 @@ if __name__ == "__main__":
sel = None
def usage():
- print >> sys.stderr, "Usage: %s [-q|--quiet] [-i|--interactive] [-l|--list-entries] [-n|--not-really] [--output=] [--kernel=] [--ramdisk=] [--args=] [--entry=] [--output-directory=] [--output-format=sxp|simple|simple0] [--offset=] <image>" %(sys.argv[0],)
+ print("Usage: %s [-q|--quiet] [-i|--interactive] [-l|--list-entries] [-n|--not-really] [--output=] [--kernel=] [--ramdisk=] [--args=] [--entry=] [--output-directory=] [--output-format=sxp|simple|simple0] [--offset=] <image>" %(sys.argv[0],), file=sys.stderr)
def copy_from_image(fs, file_to_read, file_type, output_directory,
not_really):
@@ -783,8 +781,8 @@ if __name__ == "__main__":
sys.exit("The requested %s file does not exist" % file_type)
try:
datafile = fs.open_file(file_to_read)
- except Exception, e:
- print >>sys.stderr, e
+ except Exception as e:
+ print(e, file=sys.stderr)
sys.exit("Error opening %s in guest" % file_to_read)
(tfd, ret) = tempfile.mkstemp(prefix="boot_"+file_type+".",
dir=output_directory)
@@ -799,8 +797,8 @@ if __name__ == "__main__":
return ret
try:
os.write(tfd, data)
- except Exception, e:
- print >>sys.stderr, e
+ except Exception as e:
+ print(e, file=sys.stderr)
os.close(tfd)
os.unlink(ret)
del datafile
@@ -864,7 +862,7 @@ if __name__ == "__main__":
try:
part_offs = [ int(a) ]
except ValueError:
- print "offset value must be an integer"
+ print("offset value must be an integer")
usage()
sys.exit(1)
elif o in ("--entry",):
@@ -877,23 +875,23 @@ if __name__ == "__main__":
debug = True
elif o in ("--output-format",):
if a not in ["sxp", "simple", "simple0"]:
- print "unknown output format %s" % a
+ print("unknown output format %s" % a)
usage()
sys.exit(1)
output_format = a
elif o in ("--output-directory",):
if not os.path.isdir(a):
- print "%s is not an existing directory" % a
+ print("%s is not an existing directory" % a)
sys.exit(1)
output_directory = a
if debug:
- logging.basicConfig(level=logging.DEBUG)
+ logging.basicConfig(level=logging.DEBUG)
try:
- os.makedirs(output_directory, 0700)
- except OSError,e:
+ os.makedirs(output_directory, 0o700)
+ except OSError as e:
if (e.errno == errno.EEXIST) and os.path.isdir(output_directory):
pass
else:
@@ -907,10 +905,10 @@ if __name__ == "__main__":
# debug
if isconfig:
chosencfg = run_grub(file, entry, fs, incfg["args"])
- print " kernel: %s" % chosencfg["kernel"]
+ print(" kernel: %s" % chosencfg["kernel"])
if chosencfg["ramdisk"]:
- print " initrd: %s" % chosencfg["ramdisk"]
- print " args: %s" % chosencfg["args"]
+ print(" initrd: %s" % chosencfg["ramdisk"])
+ print(" args: %s" % chosencfg["args"])
sys.exit(0)
# if boot filesystem is set then pass to fsimage.open
@@ -947,7 +945,7 @@ if __name__ == "__main__":
# IOErrors raised by fsimage.open
# RuntimeErrors raised by run_grub if no menu.lst present
if debug:
- traceback.print_exc()
+ traceback.print_exc()
fs = None
continue
@@ -956,7 +954,7 @@ if __name__ == "__main__":
# Did looping through partitions find us a kernel?
if fs is None:
- raise RuntimeError, "Unable to find partition containing kernel"
+ raise RuntimeError("Unable to find partition containing kernel")
bootcfg["kernel"] = copy_from_image(fs, chosencfg["kernel"], "kernel",
output_directory, not_really)
@@ -991,5 +989,5 @@ if __name__ == "__main__":
ostring = format_simple(bootcfg["kernel"], bootcfg["ramdisk"], args, "\0")
sys.stdout.flush()
- os.write(fd, ostring)
+ os.write(fd, ostring.encode('utf-8'))
Index: xen-4.10.0-testing/tools/pygrub/src/GrubConf.py
===================================================================
--- xen-4.10.0-testing.orig/tools/pygrub/src/GrubConf.py
+++ xen-4.10.0-testing/tools/pygrub/src/GrubConf.py
@@ -44,7 +44,7 @@ def get_path(s):
return (None, s)
idx = s.find(')')
if idx == -1:
- raise ValueError, "Unable to find matching ')'"
+ raise ValueError("Unable to find matching ')'")
d = s[:idx]
return (GrubDiskPart(d), s[idx + 1:])
@@ -100,7 +100,7 @@ class _GrubImage(object):
" initrd: %s\n" %(self.title, self.root, self.kernel,
self.args, self.initrd))
def _parse(self, lines):
- map(self.set_from_line, lines)
+ list(map(self.set_from_line, lines))
def reset(self, lines):
self._root = self._initrd = self._kernel = self._args = None
@@ -141,7 +141,7 @@ class GrubImage(_GrubImage):
def set_from_line(self, line, replace = None):
(com, arg) = grub_exact_split(line, 2)
- if self.commands.has_key(com):
+ if com in self.commands:
if self.commands[com] is not None:
setattr(self, self.commands[com], arg.strip())
else:
@@ -177,7 +177,7 @@ class _GrubConfigFile(object):
self.parse()
def parse(self, buf = None):
- raise RuntimeError, "unimplemented parse function"
+ raise RuntimeError("unimplemented parse function")
def hasPasswordAccess(self):
return self.passwordAccess
@@ -201,7 +201,7 @@ class _GrubConfigFile(object):
import crypt
if crypt.crypt(password, pwd[1]) == pwd[1]:
return True
- except Exception, e:
+ except Exception as e:
self.passExc = "Can't verify password: %s" % str(e)
return False
@@ -213,7 +213,7 @@ class _GrubConfigFile(object):
def set(self, line):
(com, arg) = grub_exact_split(line, 2)
- if self.commands.has_key(com):
+ if com in self.commands:
if self.commands[com] is not None:
setattr(self, self.commands[com], arg.strip())
else:
@@ -232,8 +232,8 @@ class _GrubConfigFile(object):
else:
self._default = val
- if self._default < 0:
- raise ValueError, "default must be positive number"
+ if int(self._default) < 0:
+ raise ValueError("default must be positive number")
default = property(_get_default, _set_default)
def set_splash(self, val):
@@ -265,7 +265,7 @@ class GrubConfigFile(_GrubConfigFile):
def parse(self, buf = None):
if buf is None:
if self.filename is None:
- raise ValueError, "No config file defined to parse!"
+ raise ValueError("No config file defined to parse!")
f = open(self.filename, 'r')
lines = f.readlines()
@@ -296,7 +296,7 @@ class GrubConfigFile(_GrubConfigFile):
continue
(com, arg) = grub_exact_split(l, 2)
- if self.commands.has_key(com):
+ if com in self.commands:
if self.commands[com] is not None:
setattr(self, self.commands[com], arg.strip())
else:
@@ -328,7 +328,7 @@ class Grub2Image(_GrubImage):
if com == "set":
(com,arg) = grub2_handle_set(arg)
- if self.commands.has_key(com):
+ if com in self.commands:
if self.commands[com] is not None:
setattr(self, self.commands[com], arg.strip())
else:
@@ -364,7 +364,7 @@ class Grub2ConfigFile(_GrubConfigFile):
def parse(self, buf = None):
if buf is None:
if self.filename is None:
- raise ValueError, "No config file defined to parse!"
+ raise ValueError("No config file defined to parse!")
f = open(self.filename, 'r')
lines = f.readlines()
@@ -398,7 +398,7 @@ class Grub2ConfigFile(_GrubConfigFile):
title_match = re.match('^menuentry ["\'](.*?)["\'] (.*){', l)
if title_match:
if img is not None:
- raise RuntimeError, "syntax error: cannot nest menuentry (%d %s)" % (len(img),img)
+ raise RuntimeError("syntax error: cannot nest menuentry (%d %s)" % (len(img),img))
img = []
title = title_match.group(1)
if not l.endswith('}'):
@@ -416,7 +416,7 @@ class Grub2ConfigFile(_GrubConfigFile):
menu_level -= 1
continue
else:
- raise RuntimeError, "syntax error: closing brace without menuentry"
+ raise RuntimeError("syntax error: closing brace without menuentry")
self.add_image(Grub2Image(title, img))
img = None
@@ -431,7 +431,7 @@ class Grub2ConfigFile(_GrubConfigFile):
if com == "set":
(com,arg) = grub2_handle_set(arg)
- if self.commands.has_key(com):
+ if com in self.commands:
if self.commands[com] is not None:
arg_strip = arg.strip()
if arg_strip == "${saved_entry}" or arg_strip == "${next_entry}":
@@ -446,7 +446,7 @@ class Grub2ConfigFile(_GrubConfigFile):
logging.debug("Unknown directive %s" %(com,))
if img is not None:
- raise RuntimeError, "syntax error: end of file with open menuentry(%d %s)" % (len(img),img)
+ raise RuntimeError("syntax error: end of file with open menuentry(%d %s)" % (len(img),img))
if self.hasPassword():
self.setPasswordAccess(False)
@@ -465,12 +465,12 @@ class Grub2ConfigFile(_GrubConfigFile):
if __name__ == "__main__":
if len(sys.argv) < 3:
- raise RuntimeError, "Need a grub version (\"grub\" or \"grub2\") and a grub.conf or grub.cfg to read"
+ raise RuntimeError("Need a grub version (\"grub\" or \"grub2\") and a grub.conf or grub.cfg to read")
if sys.argv[1] == "grub":
g = GrubConfigFile(sys.argv[2])
elif sys.argv[1] == "grub2":
g = Grub2ConfigFile(sys.argv[2])
else:
- raise RuntimeError, "Unknown config type %s" % sys.argv[1]
+ raise RuntimeError("Unknown config type %s" % sys.argv[1])
for i in g.images:
- print i #, i.title, i.root, i.kernel, i.args, i.initrd
+ print(i) #, i.title, i.root, i.kernel, i.args, i.initrd
Index: xen-4.10.0-testing/tools/pygrub/src/ExtLinuxConf.py
===================================================================
--- xen-4.10.0-testing.orig/tools/pygrub/src/ExtLinuxConf.py
+++ xen-4.10.0-testing/tools/pygrub/src/ExtLinuxConf.py
@@ -12,7 +12,7 @@
import sys, re, os
import logging
-import GrubConf
+from . import GrubConf
class ExtLinuxImage(object):
def __init__(self, lines, path):
@@ -32,7 +32,7 @@ class ExtLinuxImage(object):
self.lines = []
self.path = path
self.root = ""
- map(self.set_from_line, lines)
+ list(map(self.set_from_line, lines))
def set_from_line(self, line, replace = None):
(com, arg) = GrubConf.grub_exact_split(line, 2)
@@ -67,7 +67,7 @@ class ExtLinuxImage(object):
setattr(self, "initrd", a.replace("initrd=", ""))
arg = arg.replace(a, "")
- if com is not None and self.commands.has_key(com):
+ if com is not None and com in self.commands:
if self.commands[com] is not None:
setattr(self, self.commands[com], re.sub('^"(.+)"$', r"\1", arg.strip()))
else:
@@ -136,7 +136,7 @@ class ExtLinuxConfigFile(object):
def parse(self, buf = None):
if buf is None:
if self.filename is None:
- raise ValueError, "No config file defined to parse!"
+ raise ValueError("No config file defined to parse!")
f = open(self.filename, 'r')
lines = f.readlines()
@@ -167,7 +167,7 @@ class ExtLinuxConfigFile(object):
(com, arg) = GrubConf.grub_exact_split(l, 2)
com = com.lower()
- if self.commands.has_key(com):
+ if com in self.commands:
if self.commands[com] is not None:
setattr(self, self.commands[com], arg.strip())
else:
@@ -207,8 +207,8 @@ class ExtLinuxConfigFile(object):
if __name__ == "__main__":
if len(sys.argv) < 2:
- raise RuntimeError, "Need a configuration file to read"
+ raise RuntimeError("Need a configuration file to read")
g = ExtLinuxConfigFile(sys.argv[1])
for i in g.images:
- print i
- print g.default
+ print(i)
+ print(g.default)
Index: xen-4.10.0-testing/tools/pygrub/src/LiloConf.py
===================================================================
--- xen-4.10.0-testing.orig/tools/pygrub/src/LiloConf.py
+++ xen-4.10.0-testing/tools/pygrub/src/LiloConf.py
@@ -4,7 +4,7 @@
import sys, re, os
import logging
-import GrubConf
+from . import GrubConf
class LiloImage(object):
def __init__(self, lines, path):
@@ -24,12 +24,12 @@ class LiloImage(object):
self.lines = []
self.path = path
self.root = ""
- map(self.set_from_line, lines)
+ list(map(self.set_from_line, lines))
def set_from_line(self, line, replace = None):
(com, arg) = GrubConf.grub_exact_split(line, 2)
- if self.commands.has_key(com):
+ if com in self.commands:
if self.commands[com] is not None:
setattr(self, self.commands[com], re.sub('^"(.+)"$', r"\1", arg.strip()))
else:
@@ -97,7 +97,7 @@ class LiloConfigFile(object):
def parse(self, buf = None):
if buf is None:
if self.filename is None:
- raise ValueError, "No config file defined to parse!"
+ raise ValueError("No config file defined to parse!")
f = open(self.filename, 'r')
lines = f.readlines()
@@ -127,7 +127,7 @@ class LiloConfigFile(object):
continue
(com, arg) = GrubConf.grub_exact_split(l, 2)
- if self.commands.has_key(com):
+ if com in self.commands:
if self.commands[com] is not None:
setattr(self, self.commands[com], arg.strip())
else:
@@ -170,8 +170,8 @@ class LiloConfigFile(object):
if __name__ == "__main__":
if len(sys.argv) < 2:
- raise RuntimeError, "Need a lilo.conf to read"
+ raise RuntimeError("Need a lilo.conf to read")
g = LiloConfigFile(sys.argv[1])
for i in g.images:
- print i #, i.title, i.root, i.kernel, i.args, i.initrd
- print g.default
+ print(i) #, i.title, i.root, i.kernel, i.args, i.initrd
+ print(g.default)
Index: xen-4.10.0-testing/tools/pygrub/src/fsimage/fsimage.c
===================================================================
--- xen-4.10.0-testing.orig/tools/pygrub/src/fsimage/fsimage.c
+++ xen-4.10.0-testing/tools/pygrub/src/fsimage/fsimage.c
@@ -66,12 +66,12 @@ fsimage_file_read(fsimage_file_t *file,
bufsize = size ? size : 4096;
- if ((buffer = PyString_FromStringAndSize(NULL, bufsize)) == NULL)
+ if ((buffer = PyBytes_FromStringAndSize(NULL, bufsize)) == NULL)
return (NULL);
while (1) {
int err;
- void *buf = PyString_AS_STRING(buffer) + bytesread;
+ void *buf = PyBytes_AS_STRING(buffer) + bytesread;
err = fsi_pread_file(file->file, buf, bufsize,
bytesread + offset);
@@ -91,12 +91,12 @@ fsimage_file_read(fsimage_file_t *file,
if (bufsize == 0)
break;
} else {
- if (_PyString_Resize(&buffer, bytesread + bufsize) < 0)
+ if (_PyBytes_Resize(&buffer, bytesread + bufsize) < 0)
return (NULL);
}
}
- _PyString_Resize(&buffer, bytesread);
+ _PyBytes_Resize(&buffer, bytesread);
return (buffer);
}
@@ -107,7 +107,7 @@ PyDoc_STRVAR(fsimage_file_read__doc__,
"file. If offset is specified as well, read from the given "
"offset.\n");
-static struct PyMethodDef fsimage_file_methods[] = {
+static PyMethodDef fsimage_file_methods[] = {
{ "read", (PyCFunction) fsimage_file_read,
METH_VARARGS|METH_KEYWORDS, fsimage_file_read__doc__ },
{ NULL, NULL, 0, NULL }
@@ -116,7 +116,13 @@ static struct PyMethodDef fsimage_file_m
static PyObject *
fsimage_file_getattr(fsimage_file_t *file, char *name)
{
- return (Py_FindMethod(fsimage_file_methods, (PyObject *)file, name));
+ PyMethodDef *ml = fsimage_file_methods;
+ for (; ml->ml_name != NULL; ml++) {
+ if (name[0] == ml->ml_name[0] &&
+ strcmp(name+1, ml->ml_name+1) == 0)
+ return PyCFunction_New(ml, (PyObject *)file);
+ }
+ return (NULL);
}
static void
@@ -130,8 +136,7 @@ fsimage_file_dealloc(fsimage_file_t *fil
static char fsimage_file_type__doc__[] = "Filesystem image file";
PyTypeObject fsimage_file_type = {
- PyObject_HEAD_INIT(&PyType_Type)
- 0, /* ob_size */
+ PyVarObject_HEAD_INIT(&PyType_Type, 0)
"fsimage.file", /* tp_name */
sizeof(fsimage_file_t), /* tp_size */
0, /* tp_itemsize */
@@ -207,7 +212,7 @@ PyDoc_STRVAR(fsimage_fs_file_exists__doc
"file_exists(fs, name) - lookup name in the given fs and return "
"True if it exists");
-static struct PyMethodDef fsimage_fs_methods[] = {
+static PyMethodDef fsimage_fs_methods[] = {
{ "open_file", (PyCFunction) fsimage_fs_open_file,
METH_VARARGS|METH_KEYWORDS, fsimage_fs_open_file__doc__ },
{ "file_exists", (PyCFunction) fsimage_fs_file_exists,
@@ -218,7 +223,13 @@ static struct PyMethodDef fsimage_fs_met
static PyObject *
fsimage_fs_getattr(fsimage_fs_t *fs, char *name)
{
- return (Py_FindMethod(fsimage_fs_methods, (PyObject *)fs, name));
+ PyMethodDef *ml = fsimage_fs_methods;
+ for (; ml->ml_name != NULL; ml++) {
+ if (name[0] == ml->ml_name[0] &&
+ strcmp(name+1, ml->ml_name+1) == 0)
+ return PyCFunction_New(ml, (PyObject *)fs);
+ }
+ return (NULL);
}
static void
@@ -232,8 +243,7 @@ fsimage_fs_dealloc (fsimage_fs_t *fs)
PyDoc_STRVAR(fsimage_fs_type__doc__, "Filesystem image");
PyTypeObject fsimage_fs_type = {
- PyObject_HEAD_INIT(&PyType_Type)
- 0, /* ob_size */
+ PyVarObject_HEAD_INIT(&PyType_Type, 0)
"fsimage.fs", /* tp_name */
sizeof(fsimage_fs_t), /* tp_size */
0, /* tp_itemsize */
@@ -308,7 +318,7 @@ PyDoc_STRVAR(fsimage_getbootstring__doc_
"getbootstring(fs) - Return the boot string needed for this file system "
"or NULL if none is needed.\n");
-static struct PyMethodDef fsimage_module_methods[] = {
+static PyMethodDef fsimage_module_methods[] = {
{ "open", (PyCFunction)fsimage_open,
METH_VARARGS|METH_KEYWORDS, fsimage_open__doc__ },
{ "getbootstring", (PyCFunction)fsimage_getbootstring,
@@ -316,8 +326,17 @@ static struct PyMethodDef fsimage_module
{ NULL, NULL, 0, NULL }
};
+static struct PyModuleDef fsimage_module =
+{
+ PyModuleDef_HEAD_INIT,
+ "fsimage",
+ "",
+ -1,
+ fsimage_module_methods
+};
+
PyMODINIT_FUNC
-initfsimage(void)
+PyInit_fsimage(void)
{
- Py_InitModule("fsimage", fsimage_module_methods);
+ return PyModule_Create(&fsimage_module);
}
