File nvme-stas.changes of Package nvme-stas.31091
-------------------------------------------------------------------
Mon Oct 9 14:03:04 UTC 2023 - Martin Wilck <mwilck@suse.com>
- Actually update the code from 2.3-rc4 to 2.3
-------------------------------------------------------------------
Thu Sep 21 19:04:03 UTC 2023 - Martin Wilck <mwilck@suse.com>
- Update to version v2.3
* Support for NVMe Boot Firmware Table (NBFT) as configuration source
* Optimization of udev handling (bsc#1214078)
* Bug fixes and optimizations
-------------------------------------------------------------------
Mon Aug 21 13:30:51 UTC 2023 - Martin Wilck <mwilck@suse.com>
- Update to version v2.3-rc4:
* Improve algorithm to see if we can reuse existing connections
* udev: Optimize uevent handling
* iputil: Reduce amount of netlink requests to the kernel
* udev: FC/Loop - use case-insensitive comparison for traddr
* trid: Take Host NQN into account
* avahi: add connectivity checker to verify IP addresses are reachable
* stafd|ctrl: Do not recreate ctrl object on nvme removed events
* udev: Rework/simplify _cid_matches_tid()
* udev-rules: Only react to `rediscover` events (not `connected`)
* udev: Use ipaddress objects when comparing traddr.
* udev: Only take src-addr into account for transport=="tcp"
* trid: use strong comparison on host-iface
* udev-rule: Invoke systemctl "restart" instead of "start"
* udev: improve comparison between candidate and existing controllers
* nbft: stafd will now use NBFT data (if found)
* nbft: Add NbftConf() object to retrieve and cache NBFT data
* iputil: Add mac2iface() and corresponding unit test
* ctrl: fix inverted logic "is not None" -> "is None"
* staslib: Add method to retrieve NBFT data
-------------------------------------------------------------------
Mon Jun 12 10:22:05 UTC 2023 - Martin Wilck <mwilck@suse.com>
- Update to version 2.2.2:
Fix python crash caused by wrong transport identifier handling
(bsc#1211557)
-------------------------------------------------------------------
Fri Jun 2 16:01:46 UTC 2023 - Martin Wilck <mwilck@suse.com>
- Update to version 2.2.1:
* staslib: Fix setting controller DHCHAP key (bsc#1211557)
-------------------------------------------------------------------
Fri Mar 31 19:42:37 UTC 2023 - Martin Wilck <mwilck@suse.com>
- Update to version 2.2:
* add DHCHAP support for in-band authentication (bsc#1208580)
* staslib: Define LIBNVME_VERSION in defs.py
* staslib: Disable udev-rule permanently
* build: Change libnvme dependency from 1.2 to 1.3
-------------------------------------------------------------------
Wed Jan 25 19:28:28 UTC 2023 - Martin Wilck <mwilck@suse.com>
- Update to version 2.1.2:
* staslib: fix RoCE support (bsc#1207436)
* staslib: Only display unresponsive timer info for "discovered" DCs
* staslib: Fix Connect/Disconnect performed in reserve order
* udev: Set udev event priority to high
* stafd: Bug fix. Default "[Global] persistent-connections=false"
* stafd: Handle unresponsive DCs in _config_ctrls_finish()
* stafd: Fix handling of lost zeroconf-discovered DC
* staslib: Improve name resolution algorithm
* staslib: Add unit (sec) to timeout value in info() output
-------------------------------------------------------------------
Tue Dec 13 14:38:10 UTC 2022 - mwilck@suse.com
- Update to version 2.1:
* stafd: Add zeroconf-connections-persistence conf. parameter
* Avahi: Handle upper/lower case 'NQN/nqn' in TXT attribute
(bsc#1205873)
* stafd: Add "origin" parameter to DC controller objects
* staslib: Trim whitespaces at the source (bsc#1204975)
* udev: Throttle EnvironmentError exception messages
* del patch: 0001-meson-disable-subproject.patch (not necessary any more)
-------------------------------------------------------------------
Mon Nov 21 17:10:55 UTC 2022 - mwilck@suse.com
- Update to version 2.0 (jsc#PED-2487)
* stafd: Add support for PLEO bit ("Port Local Entries Only",
only with libnvme 1.2 or higher)
* Add support for NCC bit ("Not Connected to CDC")
* "sticky-connections" is replaced by "disconnect-scope+disconnect-trtypes"
* "blacklist" is replaced by "exclude" (but still supported)
* better udev support / coexistence
* support for new kernel "src_addr" attribute
* add patch: 0001-meson-disable-subproject.patch (to fix build in OBS)
-------------------------------------------------------------------
Tue Nov 15 14:51:56 UTC 2022 - mwilck@suse.com
- Update to version 1.1.7:
* staslib: Trim white spaces from DLPEs and manual configuration.
(bsc#1204975)
-------------------------------------------------------------------
Mon Aug 08 20:01:02 UTC 2022 - mwilck@suse.com
- Update to version 1.1.6:
Bug fix release
* conf: Enable sticky-connections by default
* staslib: check that async operation hasn't been cancelled before proceeding
* stacd: fix I/O controller connection audits
* staslib: add override support
* systemd: add explicit dependency to modprobe@nvme_fabrics.service
-------------------------------------------------------------------
Mon Jul 04 13:19:16 UTC 2022 - mwilck@suse.com
- Update to version 1.1.5 (bsc#1200128)
Bug fix release
* udev: fix I/O controller scan & detect algorithm
* stacd: Fix D-Bus race condition between stacd and stafd.
* staslib: fix support for fibre channel
* doc: update README.md
* staslib: fix race conditions during controller object removal.
* stacd: fix defered call to remove_controller() with wrong arguments
* staslib: make sure controller object gets "purged" when removed.
* staslib: calling wrong cback function on controller removal.
* staslib: Fix cback function deleting object that called the cback.
* stacd: audit connections
* stafd, stacd: Add man page to systend service file.
* stacd: Add configuration parameter 'sticky-connections'
* doc: troubleshoot guide for missing mDNS packets
* stacd: allow disabling nvme-cli auto-connect udev rule.
- Added systemd service file (service disabled)
- Spec file: use %python_sitelib rather than %python_sitearch, and install
everything under %{python_sitelib}/staslib
-------------------------------------------------------------------
Wed Apr 06 11:07:53 UTC 2022 - Daniel Wagner <daniel.wagner@suse.com>
- Update to version v1.0:
* Do not call persistent_set() from libnvme
* dbus: return native dbus data instead of json when possible.
* update documentation
-------------------------------------------------------------------
Fri Mar 25 11:32:30 UTC 2022 - Daniel Wagner <daniel.wagner@suse.com>
- Update to version 1.0-rc5:
* Remove misconfiguration check. (bsc#1197361)
* Document how to increase the number of interfaces that Avahi can monitor.
- Removed python3-netifaces dependency (bsc#1197361)
- Added ahahi dependency
- Do not list files twice (add %dir to directory paths)
- Drop workaround for Python interpreter path fixup.
-------------------------------------------------------------------
Wed Mar 23 08:23:34 UTC 2022 - Daniel Wagner <daniel.wagner@suse.com>
- Update to version 1.0-rc4:
* Check ignore-iface when creating TransportId object
* Adding man pages for ip-family and ignore-iface
* Add ignore-iface and ip-family conf. options
* Update the documentation
* Change default address returned by name resolver
* Filter out invalid IP addresses. (bsc#1197361)
* When reading the Host NQN, warn people if the NQN seems invalid
* Print descriptive message when unable to run stafctl/stacctl
* Use the newly added cntlrtype to check the type of controller
* minor fix to previous change to set the log level on libnvme
* LOG: enable libnvme debug when trace is enabled
- Added python3-netifaces dependency
-------------------------------------------------------------------
Thu Mar 3 14:19:14 UTC 2022 - Daniel Wagner <daniel.wagner@suse.com>
- Correct License information. This project is licenced under
Apache License 2.0.
- Mark sys.conf.doc as config file.
-------------------------------------------------------------------
Thu Mar 3 13:59:52 UTC 2022 - Dominique Leuenberger <dimstar@opensuse.org>
- Add gobject-introspection BuildRequires: enable typelib
introspection. This allows RPM to add a bunch of autodetected
dependenices by inspecting the python scripts (basedon
python-gobject).
-------------------------------------------------------------------
Wed Feb 23 16:17:42 UTC 2022 - Daniel Wagner <daniel.wagner@suse.com>
- Update to version 1.0-rc2:
* Fis github workflows to pull from upstream libnvme
* TP8010 was merged into upstream libnvme. Some APIs have changed.
This is to update nvme-stas to the new APIs.
* A bunch of mostly cosmetic changes
* Cleaning up a few things.
* Simplifying mDNS configuration and updating documentation.
* Changed DBus rules to only block setting properties
* Restrict the Dbus "deny" rules to only the debug interface.
-------------------------------------------------------------------
Wed Feb 16 17:36:18 UTC 2022 - Daniel Wagner <daniel.wagner@suse.com>
- Update to version 1.0-rc1:
* fix comment
* Perform explicit registration from user-space
* Add known image to docker-compose
* Add docker run/build way to README
* Actions: Disable actions/setup-python
* Actions: Work on incoming branch
* Fixing docker compilation error
* Update docker-publish.yml
* Fix github workflow
* removed unused code
* D-Bus config fixes.
* github workflow actions - fix PYTHONPATH
-------------------------------------------------------------------
Thu Jan 27 17:28:48 UTC 2022 - Daniel Wagner <daniel.wagner@suse.com>
- Initial nvme-stas packaging
