File dl-runtime-resolve-xsave.patch of Package glibc.14271
2017-10-22 H.J. Lu <hongjiu.lu@intel.com>
[BZ #21265]
* sysdeps/x86/cpu-features-offsets.sym (XSAVE_STATE_SIZE_OFFSET):
New.
* sysdeps/x86/cpu-features.c: Include <libc-pointer-arith.h>.
(get_common_indeces): Set xsave_state_size, xsave_state_full_size
and bit_arch_XSAVEC_Usable if needed.
(init_cpu_features): Remove bit_arch_Use_dl_runtime_resolve_slow
and bit_arch_Use_dl_runtime_resolve_opt.
* sysdeps/x86/cpu-features.h (bit_arch_Use_dl_runtime_resolve_opt):
Removed.
(bit_arch_Use_dl_runtime_resolve_slow): Likewise.
(bit_arch_Prefer_No_AVX512): Updated.
(bit_arch_MathVec_Prefer_No_AVX512): Likewise.
(bit_arch_XSAVEC_Usable): New.
(STATE_SAVE_OFFSET): Likewise.
(STATE_SAVE_MASK): Likewise.
[__ASSEMBLER__]: Include <cpu-features-offsets.h>.
(cpu_features): Add xsave_state_size and xsave_state_full_size.
(index_arch_Use_dl_runtime_resolve_opt): Removed.
(index_arch_Use_dl_runtime_resolve_slow): Likewise.
(index_arch_XSAVEC_Usable): New.
* sysdeps/x86/cpu-tunables.c (TUNABLE_CALLBACK (set_hwcaps)):
Support XSAVEC_Usable. Remove Use_dl_runtime_resolve_slow.
* sysdeps/x86_64/Makefile (tst-x86_64-1-ENV): New if tunables
is enabled.
* sysdeps/x86_64/dl-machine.h (elf_machine_runtime_setup):
Replace _dl_runtime_resolve_sse, _dl_runtime_resolve_avx,
_dl_runtime_resolve_avx_slow, _dl_runtime_resolve_avx_opt,
_dl_runtime_resolve_avx512 and _dl_runtime_resolve_avx512_opt
with _dl_runtime_resolve_fxsave, _dl_runtime_resolve_xsave and
_dl_runtime_resolve_xsavec.
* sysdeps/x86_64/dl-trampoline.S (DL_RUNTIME_UNALIGNED_VEC_SIZE):
Removed.
(DL_RUNTIME_RESOLVE_REALIGN_STACK): Check STATE_SAVE_ALIGNMENT
instead of VEC_SIZE.
(REGISTER_SAVE_BND0): Removed.
(REGISTER_SAVE_BND1): Likewise.
(REGISTER_SAVE_BND3): Likewise.
(REGISTER_SAVE_RAX): Always defined to 0.
(VMOV): Removed.
(_dl_runtime_resolve_avx): Likewise.
(_dl_runtime_resolve_avx_slow): Likewise.
(_dl_runtime_resolve_avx_opt): Likewise.
(_dl_runtime_resolve_avx512): Likewise.
(_dl_runtime_resolve_avx512_opt): Likewise.
(_dl_runtime_resolve_sse): Likewise.
(_dl_runtime_resolve_sse_vex): Likewise.
(USE_FXSAVE): New.
(_dl_runtime_resolve_fxsave): Likewise.
(USE_XSAVE): Likewise.
(_dl_runtime_resolve_xsave): Likewise.
(USE_XSAVEC): Likewise.
(_dl_runtime_resolve_xsavec): Likewise.
* sysdeps/x86_64/dl-trampoline.h (_dl_runtime_resolve_avx512):
Removed.
(_dl_runtime_resolve_avx512_opt): Likewise.
(_dl_runtime_resolve_avx): Likewise.
(_dl_runtime_resolve_avx_opt): Likewise.
(_dl_runtime_resolve_sse): Likewise.
(_dl_runtime_resolve_sse_vex): Likewise.
(_dl_runtime_resolve_fxsave): New.
(_dl_runtime_resolve_xsave): Likewise.
(_dl_runtime_resolve_xsavec): Likewise.
Index: glibc-2.26/sysdeps/x86/cpu-features-offsets.sym
===================================================================
--- glibc-2.26.orig/sysdeps/x86/cpu-features-offsets.sym
+++ glibc-2.26/sysdeps/x86/cpu-features-offsets.sym
@@ -15,6 +15,7 @@ CPUID_ECX_OFFSET offsetof (struct cpuid_
CPUID_EDX_OFFSET offsetof (struct cpuid_registers, edx)
FAMILY_OFFSET offsetof (struct cpu_features, family)
MODEL_OFFSET offsetof (struct cpu_features, model)
+XSAVE_STATE_SIZE_OFFSET offsetof (struct cpu_features, xsave_state_size)
FEATURE_OFFSET offsetof (struct cpu_features, feature)
FEATURE_SIZE sizeof (unsigned int)
Index: glibc-2.26/sysdeps/x86/cpu-features.c
===================================================================
--- glibc-2.26.orig/sysdeps/x86/cpu-features.c
+++ glibc-2.26/sysdeps/x86/cpu-features.c
@@ -19,6 +19,7 @@
#include <cpuid.h>
#include <cpu-features.h>
#include <dl-hwcap.h>
+#include <libc-pointer-arith.h>
#if HAVE_TUNABLES
# define TUNABLE_NAMESPACE tune
@@ -103,6 +104,76 @@ get_common_indeces (struct cpu_features
}
}
}
+
+ /* For _dl_runtime_resolve, set xsave_state_size to xsave area
+ size + integer register save size and align it to 64 bytes. */
+ if (cpu_features->max_cpuid >= 0xd)
+ {
+ unsigned int eax, ebx, ecx, edx;
+
+ __cpuid_count (0xd, 0, eax, ebx, ecx, edx);
+ if (ebx != 0)
+ {
+ unsigned int xsave_state_full_size
+ = ALIGN_UP (ebx + STATE_SAVE_OFFSET, 64);
+
+ cpu_features->xsave_state_size
+ = xsave_state_full_size;
+ cpu_features->xsave_state_full_size
+ = xsave_state_full_size;
+
+ __cpuid_count (0xd, 1, eax, ebx, ecx, edx);
+
+ /* Check if XSAVEC is available. */
+ if ((eax & (1 << 1)) != 0)
+ {
+ unsigned int xstate_comp_offsets[32];
+ unsigned int xstate_comp_sizes[32];
+ unsigned int i;
+
+ xstate_comp_offsets[0] = 0;
+ xstate_comp_offsets[1] = 160;
+ xstate_comp_offsets[2] = 576;
+ xstate_comp_sizes[0] = 160;
+ xstate_comp_sizes[1] = 256;
+
+ for (i = 2; i < 32; i++)
+ {
+ if ((STATE_SAVE_MASK & (1 << i)) != 0)
+ {
+ __cpuid_count (0xd, i, eax, ebx, ecx, edx);
+ xstate_comp_sizes[i] = eax;
+ }
+ else
+ {
+ ecx = 0;
+ xstate_comp_sizes[i] = 0;
+ }
+
+ if (i > 2)
+ {
+ xstate_comp_offsets[i]
+ = (xstate_comp_offsets[i - 1]
+ + xstate_comp_sizes[i -1]);
+ if ((ecx & (1 << 1)) != 0)
+ xstate_comp_offsets[i]
+ = ALIGN_UP (xstate_comp_offsets[i], 64);
+ }
+ }
+
+ /* Use XSAVEC. */
+ unsigned int size
+ = xstate_comp_offsets[31] + xstate_comp_sizes[31];
+ if (size)
+ {
+ cpu_features->xsave_state_size
+ = ALIGN_UP (size + STATE_SAVE_OFFSET, 64);
+ cpu_features->feature[index_arch_XSAVEC_Usable]
+ |= bit_arch_XSAVEC_Usable;
+ }
+ }
+ }
+ }
}
}
@@ -242,23 +313,6 @@ init_cpu_features (struct cpu_features *
else
cpu_features->feature[index_arch_Prefer_No_AVX512]
|= bit_arch_Prefer_No_AVX512;
-
- /* To avoid SSE transition penalty, use _dl_runtime_resolve_slow.
- If XGETBV suports ECX == 1, use _dl_runtime_resolve_opt.
- Use _dl_runtime_resolve_opt only with AVX512F since it is
- slower than _dl_runtime_resolve_slow with AVX. */
- cpu_features->feature[index_arch_Use_dl_runtime_resolve_slow]
- |= bit_arch_Use_dl_runtime_resolve_slow;
- if (CPU_FEATURES_ARCH_P (cpu_features, AVX512F_Usable)
- && cpu_features->max_cpuid >= 0xd)
- {
- unsigned int eax;
-
- __cpuid_count (0xd, 1, eax, ebx, ecx, edx);
- if ((eax & (1 << 2)) != 0)
- cpu_features->feature[index_arch_Use_dl_runtime_resolve_opt]
- |= bit_arch_Use_dl_runtime_resolve_opt;
- }
}
/* This spells out "AuthenticAMD". */
else if (ebx == 0x68747541 && ecx == 0x444d4163 && edx == 0x69746e65)
Index: glibc-2.26/sysdeps/x86/cpu-features.h
===================================================================
--- glibc-2.26.orig/sysdeps/x86/cpu-features.h
+++ glibc-2.26/sysdeps/x86/cpu-features.h
@@ -37,9 +37,8 @@
#define bit_arch_Prefer_No_VZEROUPPER (1 << 17)
#define bit_arch_Fast_Unaligned_Copy (1 << 18)
#define bit_arch_Prefer_ERMS (1 << 19)
-#define bit_arch_Use_dl_runtime_resolve_opt (1 << 20)
-#define bit_arch_Use_dl_runtime_resolve_slow (1 << 21)
-#define bit_arch_Prefer_No_AVX512 (1 << 22)
+#define bit_arch_Prefer_No_AVX512 (1 << 20)
+#define bit_arch_XSAVEC_Usable (1 << 21)
/* CPUID Feature flags. */
@@ -88,6 +87,15 @@
/* The current maximum size of the feature integer bit array. */
#define FEATURE_INDEX_MAX 1
+/* Offset for fxsave/xsave area used by _dl_runtime_resolve. Also need
+ space to preserve RCX, RDX, RSI, RDI, R8, R9 and RAX. It must be
+ aligned to 16 bytes for fxsave and 64 bytes for xsave. */
+#define STATE_SAVE_OFFSET (8 * 7 + 8)
+
+/* Save SSE, AVX, AVX512, mask and bound registers. */
+#define STATE_SAVE_MASK \
+ ((1 << 1) | (1 << 2) | (1 << 3) | (1 << 5) | (1 << 6) | (1 << 7))
+
#ifdef __ASSEMBLER__
# include <cpu-features-offsets.h>
@@ -123,8 +131,6 @@
# define index_arch_Prefer_No_VZEROUPPER FEATURE_INDEX_1*FEATURE_SIZE
# define index_arch_Fast_Unaligned_Copy FEATURE_INDEX_1*FEATURE_SIZE
# define index_arch_Prefer_ERMS FEATURE_INDEX_1*FEATURE_SIZE
-# define index_arch_Use_dl_runtime_resolve_opt FEATURE_INDEX_1*FEATURE_SIZE
-# define index_arch_Use_dl_runtime_resolve_slow FEATURE_INDEX_1*FEATURE_SIZE
# define index_arch_Prefer_No_AVX512 FEATURE_INDEX_1*FEATURE_SIZE
@@ -214,6 +220,18 @@ struct cpu_features
} cpuid[COMMON_CPUID_INDEX_MAX];
unsigned int family;
unsigned int model;
+ /* The state size for XSAVEC or XSAVE. The type must be unsigned long
+ int so that we use
+
+ sub xsave_state_size_offset(%rip) %RSP_LP
+
+ in _dl_runtime_resolve. */
+ unsigned long int xsave_state_size;
+ /* The full state size for XSAVE when XSAVEC is disabled by
+
+ GLIBC_TUNABLES=glibc.tune.hwcaps=-XSAVEC_Usable
+ */
+ unsigned int xsave_state_full_size;
unsigned int feature[FEATURE_INDEX_MAX];
/* Data cache size for use in memory and string routines, typically
L1 size. */
@@ -326,9 +344,8 @@ extern const struct cpu_features *__get_
# define index_arch_Prefer_No_VZEROUPPER FEATURE_INDEX_1
# define index_arch_Fast_Unaligned_Copy FEATURE_INDEX_1
# define index_arch_Prefer_ERMS FEATURE_INDEX_1
-# define index_arch_Use_dl_runtime_resolve_opt FEATURE_INDEX_1
-# define index_arch_Use_dl_runtime_resolve_slow FEATURE_INDEX_1
# define index_arch_Prefer_No_AVX512 FEATURE_INDEX_1
+# define index_arch_XSAVEC_Usable FEATURE_INDEX_1
#endif /* !__ASSEMBLER__ */
Index: glibc-2.26/sysdeps/x86/cpu-tunables.c
===================================================================
--- glibc-2.26.orig/sysdeps/x86/cpu-tunables.c
+++ glibc-2.26/sysdeps/x86/cpu-tunables.c
@@ -240,6 +240,16 @@ TUNABLE_CALLBACK (set_hwcaps) (tunable_v
Slow_SSE4_2, SSE4_2,
disable, 11);
break;
+ case 13:
+ if (disable)
+ {
+ /* Update xsave_state_size to XSAVE state size. */
+ cpu_features->xsave_state_size
+ = cpu_features->xsave_state_full_size;
+ CHECK_GLIBC_IFUNC_ARCH_OFF (n, cpu_features,
+ XSAVEC_Usable, 13);
+ }
+ break;
case 14:
if (disable)
{
@@ -308,13 +318,6 @@ TUNABLE_CALLBACK (set_hwcaps) (tunable_v
disable, 26);
}
break;
- case 27:
- {
- CHECK_GLIBC_IFUNC_ARCH_BOTH (n, cpu_features,
- Use_dl_runtime_resolve_slow,
- disable, 27);
- }
- break;
}
p += len + 1;
}
Index: glibc-2.26/sysdeps/x86_64/Makefile
===================================================================
--- glibc-2.26.orig/sysdeps/x86_64/Makefile
+++ glibc-2.26/sysdeps/x86_64/Makefile
@@ -55,6 +55,10 @@ CFLAGS-tst-quad2pie.c = $(PIE-ccflag)
tests += tst-x86_64-1
modules-names += x86_64/tst-x86_64mod-1
LDFLAGS-tst-x86_64mod-1.so = -Wl,-soname,tst-x86_64mod-1.so
+ifneq (no,$(have-tunables))
+# Test the state size for XSAVE when XSAVEC is disabled.
+tst-x86_64-1-ENV = GLIBC_TUNABLES=glibc.tune.hwcaps=-XSAVEC_Usable
+endif
$(objpfx)tst-x86_64-1: $(objpfx)x86_64/tst-x86_64mod-1.so
Index: glibc-2.26/sysdeps/x86_64/dl-machine.h
===================================================================
--- glibc-2.26.orig/sysdeps/x86_64/dl-machine.h
+++ glibc-2.26/sysdeps/x86_64/dl-machine.h
@@ -66,12 +66,9 @@ static inline int __attribute__ ((unused
elf_machine_runtime_setup (struct link_map *l, int lazy, int profile)
{
Elf64_Addr *got;
- extern void _dl_runtime_resolve_sse (ElfW(Word)) attribute_hidden;
- extern void _dl_runtime_resolve_avx (ElfW(Word)) attribute_hidden;
- extern void _dl_runtime_resolve_avx_slow (ElfW(Word)) attribute_hidden;
- extern void _dl_runtime_resolve_avx_opt (ElfW(Word)) attribute_hidden;
- extern void _dl_runtime_resolve_avx512 (ElfW(Word)) attribute_hidden;
- extern void _dl_runtime_resolve_avx512_opt (ElfW(Word)) attribute_hidden;
+ extern void _dl_runtime_resolve_fxsave (ElfW(Word)) attribute_hidden;
+ extern void _dl_runtime_resolve_xsave (ElfW(Word)) attribute_hidden;
+ extern void _dl_runtime_resolve_xsavec (ElfW(Word)) attribute_hidden;
extern void _dl_runtime_profile_sse (ElfW(Word)) attribute_hidden;
extern void _dl_runtime_profile_avx (ElfW(Word)) attribute_hidden;
extern void _dl_runtime_profile_avx512 (ElfW(Word)) attribute_hidden;
@@ -120,29 +117,14 @@ elf_machine_runtime_setup (struct link_m
/* This function will get called to fix up the GOT entry
indicated by the offset on the stack, and then jump to
the resolved address. */
- if (HAS_ARCH_FEATURE (AVX512F_Usable))
- {
- if (HAS_ARCH_FEATURE (Use_dl_runtime_resolve_opt))
- *(ElfW(Addr) *) (got + 2)
- = (ElfW(Addr)) &_dl_runtime_resolve_avx512_opt;
- else
- *(ElfW(Addr) *) (got + 2)
- = (ElfW(Addr)) &_dl_runtime_resolve_avx512;
- }
- else if (HAS_ARCH_FEATURE (AVX_Usable))
- {
- if (HAS_ARCH_FEATURE (Use_dl_runtime_resolve_opt))
- *(ElfW(Addr) *) (got + 2)
- = (ElfW(Addr)) &_dl_runtime_resolve_avx_opt;
- else if (HAS_ARCH_FEATURE (Use_dl_runtime_resolve_slow))
- *(ElfW(Addr) *) (got + 2)
- = (ElfW(Addr)) &_dl_runtime_resolve_avx_slow;
- else
- *(ElfW(Addr) *) (got + 2)
- = (ElfW(Addr)) &_dl_runtime_resolve_avx;
- }
+ if (GLRO(dl_x86_cpu_features).xsave_state_size != 0)
+ *(ElfW(Addr) *) (got + 2)
+ = (HAS_ARCH_FEATURE (XSAVEC_Usable)
+ ? (ElfW(Addr)) &_dl_runtime_resolve_xsavec
+ : (ElfW(Addr)) &_dl_runtime_resolve_xsave);
else
- *(ElfW(Addr) *) (got + 2) = (ElfW(Addr)) &_dl_runtime_resolve_sse;
+ *(ElfW(Addr) *) (got + 2)
+ = (ElfW(Addr)) &_dl_runtime_resolve_fxsave;
}
}
Index: glibc-2.26/sysdeps/x86_64/dl-trampoline.S
===================================================================
--- glibc-2.26.orig/sysdeps/x86_64/dl-trampoline.S
+++ glibc-2.26/sysdeps/x86_64/dl-trampoline.S
@@ -34,41 +34,24 @@
# define DL_STACK_ALIGNMENT 8
#endif
-#ifndef DL_RUNTIME_UNALIGNED_VEC_SIZE
-/* The maximum size in bytes of unaligned vector load and store in the
- dynamic linker. Since SSE optimized memory/string functions with
- aligned SSE register load and store are used in the dynamic linker,
- we must set this to 8 so that _dl_runtime_resolve_sse will align the
- stack before calling _dl_fixup. */
-# define DL_RUNTIME_UNALIGNED_VEC_SIZE 8
-#endif
-
-/* True if _dl_runtime_resolve should align stack to VEC_SIZE bytes. */
+/* True if _dl_runtime_resolve should align stack for STATE_SAVE or align
+ stack to 16 bytes before calling _dl_fixup. */
#define DL_RUNTIME_RESOLVE_REALIGN_STACK \
- (VEC_SIZE > DL_STACK_ALIGNMENT \
- && VEC_SIZE > DL_RUNTIME_UNALIGNED_VEC_SIZE)
-
-/* Align vector register save area to 16 bytes. */
-#define REGISTER_SAVE_VEC_OFF 0
+ (STATE_SAVE_ALIGNMENT > DL_STACK_ALIGNMENT \
+ || 16 > DL_STACK_ALIGNMENT)
/* Area on stack to save and restore registers used for parameter
passing when calling _dl_fixup. */
#ifdef __ILP32__
-# define REGISTER_SAVE_RAX (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 8)
# define PRESERVE_BND_REGS_PREFIX
#else
-/* Align bound register save area to 16 bytes. */
-# define REGISTER_SAVE_BND0 (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 8)
-# define REGISTER_SAVE_BND1 (REGISTER_SAVE_BND0 + 16)
-# define REGISTER_SAVE_BND2 (REGISTER_SAVE_BND1 + 16)
-# define REGISTER_SAVE_BND3 (REGISTER_SAVE_BND2 + 16)
-# define REGISTER_SAVE_RAX (REGISTER_SAVE_BND3 + 16)
# ifdef HAVE_MPX_SUPPORT
# define PRESERVE_BND_REGS_PREFIX bnd
# else
# define PRESERVE_BND_REGS_PREFIX .byte 0xf2
# endif
#endif
+#define REGISTER_SAVE_RAX 0
#define REGISTER_SAVE_RCX (REGISTER_SAVE_RAX + 8)
#define REGISTER_SAVE_RDX (REGISTER_SAVE_RCX + 8)
#define REGISTER_SAVE_RSI (REGISTER_SAVE_RDX + 8)
@@ -80,68 +63,56 @@
#define VEC_SIZE 64
#define VMOVA vmovdqa64
-#if DL_RUNTIME_RESOLVE_REALIGN_STACK || VEC_SIZE <= DL_STACK_ALIGNMENT
-# define VMOV vmovdqa64
-#else
-# define VMOV vmovdqu64
-#endif
#define VEC(i) zmm##i
-#define _dl_runtime_resolve _dl_runtime_resolve_avx512
#define _dl_runtime_profile _dl_runtime_profile_avx512
#include "dl-trampoline.h"
-#undef _dl_runtime_resolve
#undef _dl_runtime_profile
#undef VEC
-#undef VMOV
#undef VMOVA
#undef VEC_SIZE
#define VEC_SIZE 32
#define VMOVA vmovdqa
-#if DL_RUNTIME_RESOLVE_REALIGN_STACK || VEC_SIZE <= DL_STACK_ALIGNMENT
-# define VMOV vmovdqa
-#else
-# define VMOV vmovdqu
-#endif
#define VEC(i) ymm##i
-#define _dl_runtime_resolve _dl_runtime_resolve_avx
-#define _dl_runtime_resolve_opt _dl_runtime_resolve_avx_opt
#define _dl_runtime_profile _dl_runtime_profile_avx
#include "dl-trampoline.h"
-#undef _dl_runtime_resolve
-#undef _dl_runtime_resolve_opt
#undef _dl_runtime_profile
#undef VEC
-#undef VMOV
#undef VMOVA
#undef VEC_SIZE
/* movaps/movups is 1-byte shorter. */
#define VEC_SIZE 16
#define VMOVA movaps
-#if DL_RUNTIME_RESOLVE_REALIGN_STACK || VEC_SIZE <= DL_STACK_ALIGNMENT
-# define VMOV movaps
-#else
-# define VMOV movups
-#endif
#define VEC(i) xmm##i
-#define _dl_runtime_resolve _dl_runtime_resolve_sse
#define _dl_runtime_profile _dl_runtime_profile_sse
#undef RESTORE_AVX
#include "dl-trampoline.h"
-#undef _dl_runtime_resolve
#undef _dl_runtime_profile
-#undef VMOV
+#undef VEC
#undef VMOVA
+#undef VEC_SIZE
-/* Used by _dl_runtime_resolve_avx_opt/_dl_runtime_resolve_avx512_opt
- to preserve the full vector registers with zero upper bits. */
-#define VMOVA vmovdqa
-#if DL_RUNTIME_RESOLVE_REALIGN_STACK || VEC_SIZE <= DL_STACK_ALIGNMENT
-# define VMOV vmovdqa
-#else
-# define VMOV vmovdqu
-#endif
-#define _dl_runtime_resolve _dl_runtime_resolve_sse_vex
-#define _dl_runtime_resolve_opt _dl_runtime_resolve_avx512_opt
+#define USE_FXSAVE
+#define STATE_SAVE_ALIGNMENT 16
+#define _dl_runtime_resolve _dl_runtime_resolve_fxsave
+#include "dl-trampoline.h"
+#undef _dl_runtime_resolve
+#undef USE_FXSAVE
+#undef STATE_SAVE_ALIGNMENT
+
+#define USE_XSAVE
+#define STATE_SAVE_ALIGNMENT 64
+#define _dl_runtime_resolve _dl_runtime_resolve_xsave
+#include "dl-trampoline.h"
+#undef _dl_runtime_resolve
+#undef USE_XSAVE
+#undef STATE_SAVE_ALIGNMENT
+
+#define USE_XSAVEC
+#define STATE_SAVE_ALIGNMENT 64
+#define _dl_runtime_resolve _dl_runtime_resolve_xsavec
#include "dl-trampoline.h"
+#undef _dl_runtime_resolve
+#undef USE_XSAVEC
+#undef STATE_SAVE_ALIGNMENT
Index: glibc-2.26/sysdeps/x86_64/dl-trampoline.h
===================================================================
--- glibc-2.26.orig/sysdeps/x86_64/dl-trampoline.h
+++ glibc-2.26/sysdeps/x86_64/dl-trampoline.h
@@ -16,140 +16,47 @@
License along with the GNU C Library; if not, see
<http://www.gnu.org/licenses/>. */
-#undef REGISTER_SAVE_AREA_RAW
-#ifdef __ILP32__
-/* X32 saves RCX, RDX, RSI, RDI, R8 and R9 plus RAX as well as VEC0 to
- VEC7. */
-# define REGISTER_SAVE_AREA_RAW (8 * 7 + VEC_SIZE * 8)
-#else
-/* X86-64 saves RCX, RDX, RSI, RDI, R8 and R9 plus RAX as well as
- BND0, BND1, BND2, BND3 and VEC0 to VEC7. */
-# define REGISTER_SAVE_AREA_RAW (8 * 7 + 16 * 4 + VEC_SIZE * 8)
-#endif
+ .text
+#ifdef _dl_runtime_resolve
-#undef REGISTER_SAVE_AREA
-#undef LOCAL_STORAGE_AREA
-#undef BASE
-#if DL_RUNTIME_RESOLVE_REALIGN_STACK
-# define REGISTER_SAVE_AREA (REGISTER_SAVE_AREA_RAW + 8)
-/* Local stack area before jumping to function address: RBX. */
-# define LOCAL_STORAGE_AREA 8
-# define BASE rbx
-# if (REGISTER_SAVE_AREA % VEC_SIZE) != 0
-# error REGISTER_SAVE_AREA must be multples of VEC_SIZE
-# endif
-#else
-# define REGISTER_SAVE_AREA REGISTER_SAVE_AREA_RAW
-/* Local stack area before jumping to function address: All saved
- registers. */
-# define LOCAL_STORAGE_AREA REGISTER_SAVE_AREA
-# define BASE rsp
-# if (REGISTER_SAVE_AREA % 16) != 8
-# error REGISTER_SAVE_AREA must be odd multples of 8
-# endif
-#endif
+# undef REGISTER_SAVE_AREA
+# undef LOCAL_STORAGE_AREA
+# undef BASE
- .text
-#ifdef _dl_runtime_resolve_opt
-/* Use the smallest vector registers to preserve the full YMM/ZMM
- registers to avoid SSE transition penalty. */
+# if (STATE_SAVE_ALIGNMENT % 16) != 0
+# error STATE_SAVE_ALIGNMENT must be multples of 16
+# endif
-# if VEC_SIZE == 32
-/* Check if the upper 128 bits in %ymm0 - %ymm7 registers are non-zero
- and preserve %xmm0 - %xmm7 registers with the zero upper bits. Since
- there is no SSE transition penalty on AVX512 processors which don't
- support XGETBV with ECX == 1, _dl_runtime_resolve_avx512_slow isn't
- provided. */
- .globl _dl_runtime_resolve_avx_slow
- .hidden _dl_runtime_resolve_avx_slow
- .type _dl_runtime_resolve_avx_slow, @function
- .align 16
-_dl_runtime_resolve_avx_slow:
- cfi_startproc
- cfi_adjust_cfa_offset(16) # Incorporate PLT
- vorpd %ymm0, %ymm1, %ymm8
- vorpd %ymm2, %ymm3, %ymm9
- vorpd %ymm4, %ymm5, %ymm10
- vorpd %ymm6, %ymm7, %ymm11
- vorpd %ymm8, %ymm9, %ymm9
- vorpd %ymm10, %ymm11, %ymm10
- vpcmpeqd %xmm8, %xmm8, %xmm8
- vorpd %ymm9, %ymm10, %ymm10
- vptest %ymm10, %ymm8
- # Preserve %ymm0 - %ymm7 registers if the upper 128 bits of any
- # %ymm0 - %ymm7 registers aren't zero.
- PRESERVE_BND_REGS_PREFIX
- jnc _dl_runtime_resolve_avx
- # Use vzeroupper to avoid SSE transition penalty.
- vzeroupper
- # Preserve %xmm0 - %xmm7 registers with the zero upper 128 bits
- # when the upper 128 bits of %ymm0 - %ymm7 registers are zero.
- PRESERVE_BND_REGS_PREFIX
- jmp _dl_runtime_resolve_sse_vex
- cfi_adjust_cfa_offset(-16) # Restore PLT adjustment
- cfi_endproc
- .size _dl_runtime_resolve_avx_slow, .-_dl_runtime_resolve_avx_slow
+# if (STATE_SAVE_OFFSET % STATE_SAVE_ALIGNMENT) != 0
+# error STATE_SAVE_OFFSET must be multples of STATE_SAVE_ALIGNMENT
# endif
-/* Use XGETBV with ECX == 1 to check which bits in vector registers are
- non-zero and only preserve the non-zero lower bits with zero upper
- bits. */
- .globl _dl_runtime_resolve_opt
- .hidden _dl_runtime_resolve_opt
- .type _dl_runtime_resolve_opt, @function
- .align 16
-_dl_runtime_resolve_opt:
- cfi_startproc
- cfi_adjust_cfa_offset(16) # Incorporate PLT
- pushq %rax
- cfi_adjust_cfa_offset(8)
- cfi_rel_offset(%rax, 0)
- pushq %rcx
- cfi_adjust_cfa_offset(8)
- cfi_rel_offset(%rcx, 0)
- pushq %rdx
- cfi_adjust_cfa_offset(8)
- cfi_rel_offset(%rdx, 0)
- movl $1, %ecx
- xgetbv
- movl %eax, %r11d
- popq %rdx
- cfi_adjust_cfa_offset(-8)
- cfi_restore (%rdx)
- popq %rcx
- cfi_adjust_cfa_offset(-8)
- cfi_restore (%rcx)
- popq %rax
- cfi_adjust_cfa_offset(-8)
- cfi_restore (%rax)
-# if VEC_SIZE == 32
- # For YMM registers, check if YMM state is in use.
- andl $bit_YMM_state, %r11d
- # Preserve %xmm0 - %xmm7 registers with the zero upper 128 bits if
- # YMM state isn't in use.
- PRESERVE_BND_REGS_PREFIX
- jz _dl_runtime_resolve_sse_vex
-# elif VEC_SIZE == 16
- # For ZMM registers, check if YMM state and ZMM state are in
- # use.
- andl $(bit_YMM_state | bit_ZMM0_15_state), %r11d
- cmpl $bit_YMM_state, %r11d
- # Preserve %zmm0 - %zmm7 registers if ZMM state is in use.
- PRESERVE_BND_REGS_PREFIX
- jg _dl_runtime_resolve_avx512
- # Preserve %ymm0 - %ymm7 registers with the zero upper 256 bits if
- # ZMM state isn't in use.
- PRESERVE_BND_REGS_PREFIX
- je _dl_runtime_resolve_avx
- # Preserve %xmm0 - %xmm7 registers with the zero upper 384 bits if
- # neither YMM state nor ZMM state are in use.
+# if DL_RUNTIME_RESOLVE_REALIGN_STACK
+/* Local stack area before jumping to function address: RBX. */
+# define LOCAL_STORAGE_AREA 8
+# define BASE rbx
+# ifdef USE_FXSAVE
+/* Use fxsave to save XMM registers. */
+# define REGISTER_SAVE_AREA (512 + STATE_SAVE_OFFSET)
+# if (REGISTER_SAVE_AREA % 16) != 0
+# error REGISTER_SAVE_AREA must be multples of 16
+# endif
+# endif
# else
-# error Unsupported VEC_SIZE!
+# ifndef USE_FXSAVE
+# error USE_FXSAVE must be defined
+# endif
+/* Use fxsave to save XMM registers. */
+# define REGISTER_SAVE_AREA (512 + STATE_SAVE_OFFSET + 8)
+/* Local stack area before jumping to function address: All saved
+ registers. */
+# define LOCAL_STORAGE_AREA REGISTER_SAVE_AREA
+# define BASE rsp
+# if (REGISTER_SAVE_AREA % 16) != 8
+# error REGISTER_SAVE_AREA must be odd multples of 8
+# endif
# endif
- cfi_adjust_cfa_offset(-16) # Restore PLT adjustment
- cfi_endproc
- .size _dl_runtime_resolve_opt, .-_dl_runtime_resolve_opt
-#endif
+
.globl _dl_runtime_resolve
.hidden _dl_runtime_resolve
.type _dl_runtime_resolve, @function
@@ -157,21 +64,30 @@ _dl_runtime_resolve_opt:
cfi_startproc
_dl_runtime_resolve:
cfi_adjust_cfa_offset(16) # Incorporate PLT
-#if DL_RUNTIME_RESOLVE_REALIGN_STACK
-# if LOCAL_STORAGE_AREA != 8
-# error LOCAL_STORAGE_AREA must be 8
-# endif
+# if DL_RUNTIME_RESOLVE_REALIGN_STACK
+# if LOCAL_STORAGE_AREA != 8
+# error LOCAL_STORAGE_AREA must be 8
+# endif
pushq %rbx # push subtracts stack by 8.
cfi_adjust_cfa_offset(8)
cfi_rel_offset(%rbx, 0)
mov %RSP_LP, %RBX_LP
cfi_def_cfa_register(%rbx)
- and $-VEC_SIZE, %RSP_LP
-#endif
+ and $-STATE_SAVE_ALIGNMENT, %RSP_LP
+# endif
+# ifdef REGISTER_SAVE_AREA
sub $REGISTER_SAVE_AREA, %RSP_LP
-#if !DL_RUNTIME_RESOLVE_REALIGN_STACK
+# if !DL_RUNTIME_RESOLVE_REALIGN_STACK
cfi_adjust_cfa_offset(REGISTER_SAVE_AREA)
-#endif
+# endif
+# else
+ # Allocate stack space of the required size to save the state.
+# if IS_IN (rtld)
+ sub _rtld_local_ro+RTLD_GLOBAL_RO_DL_X86_CPU_FEATURES_OFFSET+XSAVE_STATE_SIZE_OFFSET(%rip), %RSP_LP
+# else
+ sub _dl_x86_cpu_features+XSAVE_STATE_SIZE_OFFSET(%rip), %RSP_LP
+# endif
+# endif
# Preserve registers otherwise clobbered.
movq %rax, REGISTER_SAVE_RAX(%rsp)
movq %rcx, REGISTER_SAVE_RCX(%rsp)
@@ -180,59 +96,42 @@ _dl_runtime_resolve:
movq %rdi, REGISTER_SAVE_RDI(%rsp)
movq %r8, REGISTER_SAVE_R8(%rsp)
movq %r9, REGISTER_SAVE_R9(%rsp)
- VMOV %VEC(0), (REGISTER_SAVE_VEC_OFF)(%rsp)
- VMOV %VEC(1), (REGISTER_SAVE_VEC_OFF + VEC_SIZE)(%rsp)
- VMOV %VEC(2), (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 2)(%rsp)
- VMOV %VEC(3), (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 3)(%rsp)
- VMOV %VEC(4), (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 4)(%rsp)
- VMOV %VEC(5), (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 5)(%rsp)
- VMOV %VEC(6), (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 6)(%rsp)
- VMOV %VEC(7), (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 7)(%rsp)
-#ifndef __ILP32__
- # We also have to preserve bound registers. These are nops if
- # Intel MPX isn't available or disabled.
-# ifdef HAVE_MPX_SUPPORT
- bndmov %bnd0, REGISTER_SAVE_BND0(%rsp)
- bndmov %bnd1, REGISTER_SAVE_BND1(%rsp)
- bndmov %bnd2, REGISTER_SAVE_BND2(%rsp)
- bndmov %bnd3, REGISTER_SAVE_BND3(%rsp)
+# ifdef USE_FXSAVE
+ fxsave STATE_SAVE_OFFSET(%rsp)
# else
-# if REGISTER_SAVE_BND0 == 0
- .byte 0x66,0x0f,0x1b,0x04,0x24
+ movl $STATE_SAVE_MASK, %eax
+ xorl %edx, %edx
+ # Clear the XSAVE Header.
+# ifdef USE_XSAVE
+ movq %rdx, (STATE_SAVE_OFFSET + 512)(%rsp)
+ movq %rdx, (STATE_SAVE_OFFSET + 512 + 8)(%rsp)
+# endif
+ movq %rdx, (STATE_SAVE_OFFSET + 512 + 8 * 2)(%rsp)
+ movq %rdx, (STATE_SAVE_OFFSET + 512 + 8 * 3)(%rsp)
+ movq %rdx, (STATE_SAVE_OFFSET + 512 + 8 * 4)(%rsp)
+ movq %rdx, (STATE_SAVE_OFFSET + 512 + 8 * 5)(%rsp)
+ movq %rdx, (STATE_SAVE_OFFSET + 512 + 8 * 6)(%rsp)
+ movq %rdx, (STATE_SAVE_OFFSET + 512 + 8 * 7)(%rsp)
+# ifdef USE_XSAVE
+ xsave STATE_SAVE_OFFSET(%rsp)
# else
- .byte 0x66,0x0f,0x1b,0x44,0x24,REGISTER_SAVE_BND0
+ xsavec STATE_SAVE_OFFSET(%rsp)
# endif
- .byte 0x66,0x0f,0x1b,0x4c,0x24,REGISTER_SAVE_BND1
- .byte 0x66,0x0f,0x1b,0x54,0x24,REGISTER_SAVE_BND2
- .byte 0x66,0x0f,0x1b,0x5c,0x24,REGISTER_SAVE_BND3
# endif
-#endif
# Copy args pushed by PLT in register.
# %rdi: link_map, %rsi: reloc_index
mov (LOCAL_STORAGE_AREA + 8)(%BASE), %RSI_LP
mov LOCAL_STORAGE_AREA(%BASE), %RDI_LP
call _dl_fixup # Call resolver.
mov %RAX_LP, %R11_LP # Save return value
-#ifndef __ILP32__
- # Restore bound registers. These are nops if Intel MPX isn't
- # avaiable or disabled.
-# ifdef HAVE_MPX_SUPPORT
- bndmov REGISTER_SAVE_BND3(%rsp), %bnd3
- bndmov REGISTER_SAVE_BND2(%rsp), %bnd2
- bndmov REGISTER_SAVE_BND1(%rsp), %bnd1
- bndmov REGISTER_SAVE_BND0(%rsp), %bnd0
+ # Get register content back.
+# ifdef USE_FXSAVE
+ fxrstor STATE_SAVE_OFFSET(%rsp)
# else
- .byte 0x66,0x0f,0x1a,0x5c,0x24,REGISTER_SAVE_BND3
- .byte 0x66,0x0f,0x1a,0x54,0x24,REGISTER_SAVE_BND2
- .byte 0x66,0x0f,0x1a,0x4c,0x24,REGISTER_SAVE_BND1
-# if REGISTER_SAVE_BND0 == 0
- .byte 0x66,0x0f,0x1a,0x04,0x24
-# else
- .byte 0x66,0x0f,0x1a,0x44,0x24,REGISTER_SAVE_BND0
-# endif
+ movl $STATE_SAVE_MASK, %eax
+ xorl %edx, %edx
+ xrstor STATE_SAVE_OFFSET(%rsp)
# endif
-#endif
- # Get register content back.
movq REGISTER_SAVE_R9(%rsp), %r9
movq REGISTER_SAVE_R8(%rsp), %r8
movq REGISTER_SAVE_RDI(%rsp), %rdi
@@ -240,20 +139,12 @@ _dl_runtime_resolve:
movq REGISTER_SAVE_RDX(%rsp), %rdx
movq REGISTER_SAVE_RCX(%rsp), %rcx
movq REGISTER_SAVE_RAX(%rsp), %rax
- VMOV (REGISTER_SAVE_VEC_OFF)(%rsp), %VEC(0)
- VMOV (REGISTER_SAVE_VEC_OFF + VEC_SIZE)(%rsp), %VEC(1)
- VMOV (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 2)(%rsp), %VEC(2)
- VMOV (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 3)(%rsp), %VEC(3)
- VMOV (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 4)(%rsp), %VEC(4)
- VMOV (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 5)(%rsp), %VEC(5)
- VMOV (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 6)(%rsp), %VEC(6)
- VMOV (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 7)(%rsp), %VEC(7)
-#if DL_RUNTIME_RESOLVE_REALIGN_STACK
+# if DL_RUNTIME_RESOLVE_REALIGN_STACK
mov %RBX_LP, %RSP_LP
cfi_def_cfa_register(%rsp)
movq (%rsp), %rbx
cfi_restore(%rbx)
-#endif
+# endif
# Adjust stack(PLT did 2 pushes)
add $(LOCAL_STORAGE_AREA + 16), %RSP_LP
cfi_adjust_cfa_offset(-(LOCAL_STORAGE_AREA + 16))
@@ -262,11 +153,9 @@ _dl_runtime_resolve:
jmp *%r11 # Jump to function address.
cfi_endproc
.size _dl_runtime_resolve, .-_dl_runtime_resolve
+#endif
-/* To preserve %xmm0 - %xmm7 registers, dl-trampoline.h is included
- twice, for _dl_runtime_resolve_sse and _dl_runtime_resolve_sse_vex.
- But we don't need another _dl_runtime_profile for XMM registers. */
#if !defined PROF && defined _dl_runtime_profile
# if (LR_VECTOR_OFFSET % VEC_SIZE) != 0
# error LR_VECTOR_OFFSET must be multples of VEC_SIZE