File linuxptp.changes of Package linuxptp.21034

Overview Repositories Revisions Requests Users Attributes Meta

File linuxptp.changes of Package linuxptp.21034

-------------------------------------------------------------------
Tue Jul 06 07:58:36 UTC 2021 - jbohac@suse.com

- Update to version 3.1.1:
  * Version 3.1.1
  * tc: Fix length of follow-up message of one-step sync.
  * Validate the messageLength field of incoming messages 
    (bsc#1187646, CVE-2021-3570)

-------------------------------------------------------------------
Tue Nov 10 21:35:12 UTC 2020 - jbohac@suse.com

- Update to version 3.1:
  * ts2phc: nmea: Drop time of day readings older than five seconds.
  * ts2phc: nmea: Update the leap seconds table on demand.
  * ts2phc: nmea: Add a configuration option for the current leap seconds file.
  * ts2phc: nmea: Add error messages for leap second lookup failures.
  * ts2phc: nmea: Correct UTC to TAI conversion.
  * posix_clock_open: derive PHC index from device name if possible
  * phc_ctl: display all capability information
  * ts2phc: Ignore pulses with invalid time stamps.
  * ts2phc: Fix memory leak.
  * ts2phc: Use proper close method on the error path.
  * port: Support slave event monitoring of delay timing data.
  * monitor: Add support for slave delay timing data TLV.
  * pmc: Show slave receive timing data TLVs attached to signaling messages.
  * port: Support slave event monitoring of Sync timing data.
  * clock: Create a slave event monitor.
  * Introduce a module for slave event monitoring.
  * Reject path trace TLVs with excessive elements.
  * Let the free running port state reflect the synchronization uncertain flag.
  * pmc: Support getting and setting the local synchronization uncertain flag.
  * Implement the synchronization uncertain flag.
  * Add support for write phase mode.
  * Decouple servo state from automotive profile.
  * ts2phc: Support using a GPS radio as the master clock.
  * Introduce a leap second table.
  * ts2phc: Support using a PHC as the master clock.
  * Introduce the ts2phc program.
  * pmc: Allow multiple local subscribers.
  * pmc: Subscribe to port state push notification events when requested.
  * clock: reset master/local rr when best clock id changes
  * unicast: Enable sharing master tables between ports.
  * Accept external PHC devices from the command line.
  * phc2sys: Fix frequency estimation when synchronizing a PHC to the system clock.
  * Correct the signature of the legacy system offset measurement method.
  * ptp4l: Add configuration option for socket priority
  * sk: Recognize HWTSTAMP_FILTER_SOME
  * Improve G.8275.[12] example configs.
  * rtnl: add team activebackup support
  * Ignore signaling messages on target port mismatch.
  * Avoid fault when receiving zero length packets
  * phc2sys: Fix crash when trying to synchronize unadjustable clock.
  * Added support for opening POSIX clock devices
  * Allow ignoring source port identity in end to end mode.
  * port: correction of port name used port_open
  * Add example configuration for Automotive Profile.
  * Add ignore_source_id config option.
  * Add inhibit_announce config option.
  * Add BMCA config option.
  * port: Add configurable option to set asCapable.
  * timemaster: Allow ptp4l-specific sections in [ptp4l.conf].
  * unicast: Process timeouts equal to current time.
  * snmp4lptp: added snmp4lptp.8
  * Add possibility to set clockIdentity
  * Introduce the maxStepsRemoved attribute
  * config: Add hardware time stamp filter setting mode
  * snmp4lptp: Added function for data collection from ptp4l program.
  * snmp4lptp: Added communication to ptp4l via the UDS port.
  * snmp4lptp: Add snmp sub agent for linuxptp
- re-introduce the _service file

-------------------------------------------------------------------
Wed Jul 24 12:04:35 UTC 2019 - matthias.gerstner@suse.com

- removal of SuSEfirewall2 service, since SuSEfirewall2 has been replaced by
  firewalld, see [1].

[1]: https://lists.opensuse.org/opensuse-factory/2019-01/msg00490.html

-------------------------------------------------------------------
Mon Nov 26 12:43:06 UTC 2018 - Martin Pluskal <mpluskal@suse.com>

- Update to stable release 2.0:
  * Peer-to-Peer Transparent Clock support
  * End-to-End Transparent Clock support
  * Unicast support
  * Support for all three Telecom Profiles
    + T-REC-G.8265.1-201407
    + T-REC-G.8275.1-201606
    + T-REC-G.8275.2-201708
- Changes for version 1.9.2:
  * Fixed stack buffer overflow in the new NetSync Monitor code (since 1.9)
  * Command line support for every configuration variable via long options
  * IPoIB interface support
  * Improved Delay Request performance at high message rates
  * Improved UTC offset tracking
  * Multiple TLV support
  * NetSync Monitor protocol support
  * Peer to peer one-step
  * Support for bonded interfaces
- No longer use _service

-------------------------------------------------------------------
Tue Apr  3 12:27:38 UTC 2018 - jbohac@suse.com

Update to version 1.9+git1.gd14f11f:
  * Expand and rationalize time stamping options.
  * Introduce peer to peer one step.
  * pmc: add long options and configuration file
  * port: Implement the NetSync Monitor protocol.
  * Introduce an option to ignore the transport specific field.
  * clock: add option to specify initial path delay.
  * sk: turn warnings about unexpected RX filter into debug messages.

-------------------------------------------------------------------
Thu Feb  8 12:08:37 UTC 2018 - jbohac@suse.com

- change the versioning scheme, resulting in version
  1.8+git65.g303b08c

-------------------------------------------------------------------
Thu Feb  8 08:51:50 UTC 2018 - mpluskal@suse.com

- Update to version v1.8+git.20180101 (bsc#1050682):
  * clock: Don't forward management requests to UDS port.
  * Add an acknowledgment in the readme for Meinberg.
  * phc2sys: update '-s' option
  * sk: don't leak socket when reading of IB GUID fails.
  * Add compile time sanity check for interface name lengths.
  * phc_ctl: fix adj command to accept negative offset.
  * port: return timestamping iface in port properties
  * phc2sys: re-create clock clkid and servo when phc index changed
  * phc2sys: split servo_add from function clock_add
  * transport: pass struct interface to transport_open

-------------------------------------------------------------------
Thu Nov 23 13:47:15 UTC 2017 - rbrown@suse.com

- Replace references to /var/adm/fillup-templates with new 
  %_fillupdir macro (boo#1069468)

-------------------------------------------------------------------
Mon Jul 10 11:45:01 UTC 2017 - jengelh@inai.de

- Remove future goals from description.

-------------------------------------------------------------------
Fri Jun 30 06:45:51 UTC 2017 - mpluskal@suse.com

- Cleanup spec file with spec-cleaner
- Use url for source
- Use kernel-devel instead full source

-------------------------------------------------------------------
Thu May 25 12:20:17 UTC 2017 - lpechacek@suse.com

- upgraded to 1.8
- new tools: timemaster, phc_ctl

-------------------------------------------------------------------
Wed Sep  3 01:41:37 CEST 2014 - ro@suse.de

- sanitize release line in specfile

-------------------------------------------------------------------
Thu Mar 27 12:16:20 UTC 2014 - lpechacek@suse.com

- updated How To to mention ethtool (bnc#865358)

-------------------------------------------------------------------
Wed Mar 26 16:51:51 CET 2014 - jbohac@suse.cz

- convert to systemd (bnc#865355)
  - two separate services (ptp4l and phc2sys) instead of linuxptp
  - two separate config files:
    /etc/syscconfig/ptp4l and /etc/sysconfig/phc2sys instead of
    /etc/sysconfig/linuxptp

-------------------------------------------------------------------
Tue Feb 18 18:59:56 CET 2014 - jbohac@suse.cz

- upgraded to 1.4
- fixed FSF address in init file

-------------------------------------------------------------------
Fri Jul 26 10:12:08 UTC 2013 - lpechacek@suse.com

- added Linux PTP Howto

-------------------------------------------------------------------
Thu Jun  6 09:26:54 UTC 2013 - lpechacek@suse.com

- adjusted sysconfig defaults to match changes made to phc2sys
  behavior

-------------------------------------------------------------------
Wed Jun  5 16:00:18 CEST 2013 - jbohac@suse.cz

- upgraded to 1.2.git74e70372

-------------------------------------------------------------------
Tue Apr 23 16:50:16 CEST 2013 - jbohac@suse.cz

- upgraded to 1.2

-------------------------------------------------------------------
Mon Mar 25 15:44:25 UTC 2013 - lpechacek@suse.com

- reviewed by Security (bnc#809336)

-------------------------------------------------------------------
Fri Mar 15 11:23:35 UTC 2013 - cfarrell@suse.com

- license update: GPL-2.0+
  No indication of a GPL version 2 only license. Also, use SPDX format
  where possible

-------------------------------------------------------------------
Wed Mar  6 10:44:35 UTC 2013 - lpechacek@suse.com

- upgraded to 1.1

-------------------------------------------------------------------
Fri Feb 15 05:37:47 UTC 2013 - lpechacek@suse.com

- initial packaging

Places

File linuxptp.changes of Package linuxptp.21034

Places