File crypto-policies-FIPS.patch of Package crypto-policies

Overview Repositories Revisions Requests Users Attributes Meta

File crypto-policies-FIPS.patch of Package crypto-policies (Revision 55133cf0effa26246450a3ed2117c00d)

Currently displaying revision 55133cf0effa26246450a3ed2117c00d , Show latest

Index: fedora-crypto-policies-20230420.3d08ae7/fips-mode-setup
===================================================================
--- fedora-crypto-policies-20230420.3d08ae7.orig/fips-mode-setup
+++ fedora-crypto-policies-20230420.3d08ae7/fips-mode-setup
@@ -7,6 +7,7 @@ enable_fips=
 check=0
 boot_config=1
 err_if_disabled=0
+fips_install_complete=0
 output_text=1
 
 is_ostree_system=0
@@ -75,109 +76,74 @@ if test "$is_ostree_system" = 1 && test
     exit 1
 fi
 
-
-if [ "$(id -u)" != 0 ]; then
-	echo "You must be root to run $(basename $0)"
-	exit 1
-fi
-
-
-# Detect 1: kernel FIPS flag
-fips_kernel_enabled=$(cat /proc/sys/crypto/fips_enabled)
-
-# Detect 2: initramfs fips module presence; not always can be done
-initramfs_fips_module=0
-initramfs_inspectable=0
-if test -d /boot -a -x /usr/bin/lsinitrd; then
-	initramfs_inspectable=1
-	if lsinitrd -m 2>/dev/null | grep -Fxq fips; then
-		initramfs_fips_module=1
+if test "$enable_fips" = 1 ; then
+	# Check the required FIPS modules are installed
+	if test ! -x "$(command -v grubby)" -o ! -f /usr/share/doc/packages/patterns/fips.txt -o ! -f /etc/dracut.conf.d/40-fips.conf; then
+		cond_echo "Installation of FIPS modules is not complete."
+		cond_echo "Please, install grubby and the fips pattern."
+		exit 1
 	fi
 fi
 
-# Detect 3: crypto-policy base policy
-current_policy="$(cat /etc/crypto-policies/state/current)"
-base_policy="$(echo $current_policy| cut -f 1 -d :)"
-if test "$base_policy" == "FIPS" ; then
-	base_policy_is_fips=1
-else
-	base_policy_is_fips=0
+if test "$enable_fips" = 1 ; then
+	if test ! -d /boot -o ! -x /usr/bin/lsinitrd -o x"$(/usr/bin/lsinitrd -f etc/system-fips 2>/dev/null || test $? = 2 && echo y)" != x ; then
+	fips_install_complete=1
+	fi
 fi
 
-
 if test $check = 1 ; then
-	# Look for signs for both enabling and disabling FIPS mode
-	fips_positive=0
-	fips_negative=0
-
-	# Display 1: kernel FIPS flag
-	cond_echo "FIPS mode is $(enable2txt $fips_kernel_enabled)."
-
-	# Display 2: initramfs fips module
-	if test "$initramfs_inspectable" = 1 ; then
-		cond_echo -n "Initramfs fips module is "
-		cond_echo "$(enable2txt $initramfs_fips_module)."
-	fi
-
-	# Display 3: active crypto-policy
-	cond_echo -n "The current crypto policy ($current_policy) "
-	if test "$base_policy_is_fips" == 1 ; then
-		cond_echo 'is based on the FIPS policy.'
-	else
-		cond_echo -n 'neither is the FIPS policy '
-		cond_echo 'nor is based on the FIPS policy.'
-	fi
-
-	# Decide 1: kernel FIPS flag
-	if test "$fips_kernel_enabled" = 1 ; then
-		fips_positive=1
-	else
-		fips_negative=1
-	fi
-
-	# Decide 2: initramfs module presence
-	if test "$initramfs_inspectable" = 1 ; then
-		if test "$initramfs_fips_module" = 1 ; then
-			fips_positive=1
-		else
-			fips_negative=1
+	test $fips_install_complete = 0 && cond_echo "Installation of FIPS modules is not complete."
+	fips_enabled=$(cat /proc/sys/crypto/fips_enabled)
+	cond_echo "FIPS mode is $(enable2txt $fips_enabled)."
+	if test "$fips_enabled" = 1 ; then
+		if test $fips_install_complete = 0 ; then
+			cond_echo "Inconsistent state detected."
+			exit 1
+		fi
+		current="$(cat /etc/crypto-policies/state/current)"
+		if test "$(echo $current | cut -f 1 -d :)" != "FIPS" ; then
+			cond_echo -n "The current crypto policy ($current) "
+			cond_echo -n 'neither is the FIPS policy '
+			cond_echo 'nor is based on the FIPS policy.'
+			cond_echo 'Inconsistent state detected.'
+			exit 1
 		fi
-	fi
-
-	# Decide 3: active crypto-policy
-	if test "$base_policy_is_fips" = 1 ; then
-		fips_positive=1
 	else
-		fips_negative=1
-	fi
-
-	# Make the FIPS mode consistency decision
-	if test "$fips_positive" = 1 -a "$fips_negative" = 1 ; then
-		cond_echo 'Inconsistent state detected.'
-		exit 1
+		if test $fips_install_complete = 1 ; then
+			cond_echo "Inconsistent state detected."
+			exit 1
+		fi
+		current="$(cat /etc/crypto-policies/state/current)"
+		if test "$(echo $current | cut -f 1 -d :)" == "FIPS" ; then
+			cond_echo -n "The current crypto policy ($current) "
+			cond_echo -n 'is based on the FIPS policy, '
+			cond_echo 'but FIPS mode is not enabled.'
+			cond_echo 'Inconsistent state detected.'
+			exit 1
+		fi
 	fi
-
-	# Error out if `--is-enabled` was passed and FIPS mode is not enabled
-	if test "$fips_positive" = 0 -a "$err_if_disabled" = 1 ; then
-		cond_echo 'FIPS mode is not enabled.'
+	if test "$fips_enabled" != 1 && test "$err_if_disabled" = 1; then
 		exit 2
 	fi
-
 	exit 0
 fi
 
+if [ "$(id -u)" != 0 ]; then
+	echo "You must be root to run $(basename $0)"
+	exit 1
+fi
 
 if test $enable_fips = 1 ; then
-	if test "$initramfs_fips_module" = 0 ; then
+	if test $fips_install_complete = 1 ; then
 		fips-finish-install --complete
 		if test $? != 0 ; then
-			echo "Installation of FIPS modules could not be completed."
+	 		echo "Installation of FIPS modules could not be completed."
 			exit 1
 		fi
 	fi
-	if test "$base_policy_is_fips" == 1 ; then
-		cond_echo -n 'Preserving current FIPS-based policy '
-		cond_echo "${current_policy}."
+	target="$(cat /etc/crypto-policies/state/current)"
+	if test "$(echo $target | cut -f 1 -d :)" == "FIPS" ; then
+	    cond_echo "Preserving current FIPS-based policy ${target}."
 		cond_echo -n 'Please review the subpolicies to ensure they '
 		cond_echo 'only restrict, not relax the FIPS policy.'
 	else
@@ -196,11 +162,11 @@ if test x"$boot_device" = x ; then
 	boot_device_opt=" boot=UUID=<your-boot-device-uuid>"
 	boot_config=0
 else
-        if test "$boot_device" = / ; then
-            boot_device_opt=""
-        else
-            boot_device_opt=" boot=UUID=$(blkid -s UUID -o value $boot_device)"
-        fi
+	if test "$boot_device" = / ; then
+		boot_device_opt=""
+	else
+		boot_device_opt=" boot=UUID=$(blkid -s UUID -o value $boot_device)"
+	fi
 fi
 
 if test "$boot_config" = 1 && test ! -x "$(command -v grubby)" ; then
Index: fedora-crypto-policies-20230420.3d08ae7/fips-mode-setup.8.txt
===================================================================
--- fedora-crypto-policies-20230420.3d08ae7.orig/fips-mode-setup.8.txt
+++ fedora-crypto-policies-20230420.3d08ae7/fips-mode-setup.8.txt
@@ -39,8 +39,15 @@ system crypto policy to FIPS
 (unless the policy has already been set to FIPS plus subpolicies on top,
 in which case the currently active subpolicies is retained).
 
+Some required FIPS modules (grubby, fips pattern) might not be
+installed by default. These can be installed in SUSE/openSUSE with
+the following command:
+
+    zypper in -y grubby && zypper in -y -t pattern fips
+
 Then the command modifies the boot loader configuration to add
 'fips=1' and 'boot=<boot-device>' options to the kernel command line.
+Note that, grubby could show a harmless warning about leaked file descriptors.
 
 When disabling the system FIPS mode the system crypto policy is switched
 to DEFAULT and the kernel command line option 'fips=0' is set.

Places

File crypto-policies-FIPS.patch of Package crypto-policies (Revision 55133cf0effa26246450a3ed2117c00d)

Places