Microcontroller firmware for RfCat supported USB dongles:
* YARDStick One (aka YS1)
* cc1111emk (aka DONSDONGLES)
* chronos watch dongle (aka CHRONOSDONGLE)

Render tables from rtl_power to a nice heat map. Faster and easier
to use than other tools, gopow does not require a scripting
enviroment, dependencies or development enviroment to run.

An rtl-sdr receiver for Itron ERT compatible smart meters operating
in the 900MHz ISM band.

A library that provides an interface for audio encoding and decoding with
AMBE3000 based devices in packet mode over a serial link.

SigDigger has your typical AM/FM/LSB/USB demodulation and audio
playback features. However, it also has some key additional
features that make it worth taking a look at if you're interested
in reverse engineering, or taking a closer look at digital signals.

The features include:
* Both realtime and replay analysis modes
* Analog audio playback (AM, FM, LSB and USB)
* Baseband recording (full spectrum and per-channel)
* Per-device gain presents
* Dynamic spectrum browsing
* ASK, FSK and PSK inspection
* Gradient-descent SNR calculation
* Different spectrum sources (cyclostarionary analysis, signal power…)
* Symbol recording and visualization
* Transition analysis

Sigutils is a DSP utility library which enables different signal
processing tasks like filtering or demodulation.

Airspy R0, R2, Mini, HF+ and RTL-SDR can be used as a high performance SDR
receiver capable of streaming separate chunks of the spectrum to multiple
clients over the LAN or the Internet.

srsLTE is a free and open-source LTE software suite.
It includes:
* srsUE - a complete SDR LTE UE application featuring all layers
from PHY to IP
* srsENB - a complete SDR LTE eNodeB application
* srsEPC - a light-weight LTE core network implementation with MME,
HSS and S/P-GW
* a highly modular set of common libraries for PHY, MAC, RLC, PDCP,
RRC, NAS, S1AP and GW layers.

The libraries are highly modular with minimum inter-module or external
dependencies.

The srsRAN Project is a complete 5G RAN solution, featuring
an ORAN-native CU/DU developed by SRS.

The solution includes a complete L1/2/3 implementation with minimal
external dependencies. Portable across processor architectures, the
software has been optimized for x86 and ARM. srsRAN follows the
3GPP 5G system architecture implementing the functional splits
between distributed unit (DU) and centralized unit (CU).
The CU is further disaggregated into control plane (CU-CP) and
user-plane (CU-UP).

Open-source inmarsat-C cli decoder, based on inmarsatc library.

Suscan is a realtime DSP processing library. It provides a set of
useful abstractions to perform dynamic digital signal analysis
and demodulation. Suscan offers features like:

* Multicore-friendly signal processing, based on worker threads
* Generic ASK, FSK, PSK and audio demodulators
* An extensible codec interface
* Configuration file API (XML)
* Source API based on SoapySDR

Sigutils-related widgets library.

The SvxLink project is a multi purpose voice services system for
ham radio use. For example, EchoLink connections are supported.
Also, the SvxLink server can act as a repeater controller.

A suite of utilities for programming Xilinx FPGAs, CPLDs, and EEPROMs
with the Xilinx Parallel Cable and other JTAG adapters.

Special branch for XTRX over USB3 adapter.

This project was created for packages not fitting other projects

This project was created for package python-pytest-timeout via attribute OBS:Maintained

This project was created for package satdump via attribute OBS:Maintained

This project was created for package mingw64-dtc via attribute OBS:Maintained