Use patch

• Files Changed
• Browse Source

- Update to 2.9.0:
  - Added mypy-compatible type annotations to all AsyncSSH
    modules, and a "py.typed" file to signal that annotations are
    now available for this package.
  - Added experimental support for SFTP versions 4-6. While
    AsyncSSH still defaults to only advertising version 3 when
    acting as both a client and a server, applications can
    explicitly enable support for later versions, which will be
    used if both ends of the connection agree. Not all features
    are fully supported, but a number of useful enhancements are
    now available, including as users and groups specified by
    name, higher resolution timestamps, and more granular error
    reporting.
  - Updated documentation to make it clear that keys from
    a PKCS11 provider or ssh-agent will be used even when
    client_keys is specified, unless those sources are explicitly
    disabled.
  - Improved handling of task cancellation in AsyncSSH to
    avoid triggering an error of "Future exception was never
    retrieved". Thanks go to Krzysztof Kotlenga for reporting
    this issue and providing test code to reliably reproduce it.
  - Changed implementation of OpenSSH keepalive handler to
    improve interoperability with servers which don't expect a
    "success" response when this message is sent.

• Files Changed
• Browse Source

- Update to v2.8.1
  Way too many changes to be listed here.
- use pytest to exclude test_connect_timeout_exceeded_* due to
  OBS network restrictions

• Files Changed
• Browse Source

- Do not build for python 3.6: the required dependency uvloop does
  no longer support Python 3.6 since version 0.16.

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- Update URL
- Add missing test dependencis fido2 and libnettle8
- Recommend libnettle8
- Update to v2.5.0

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- update to 2.3.0
 * Added initial support for reading configuration from OpenSSH-compatible
   config files, when present. Both client and server configuration files are
   supported, but not all config options are supported.
 * Added support for the concept of only a subset of supported algorithms being
   enabled by default, and for the ability to use wildcards when specifying
   algorithm names. Also, OpenSSH’s syntax of prefixing the list with
   ‘^’, ‘+’, or ‘-‘ is supported for incrementally adjusting the list
   of algorithms starting from the default set.
 * Added support for specifying a preferred list of client authentication
   methods, in order of preference.
 * Added the ability to use AsyncSSH’s “password” argument on servers which
   are using keyboard-interactive authentication to prompt for a “passcode”.
 * Added support for providing separate lists of private keys and certificates,
   rather than requiring them to be specifying together as a tuple.
   When this new option is used, AsyncSSH will automatically associate
   the private keys with their corresponding certificates if matching
   certificates are present in the list.
 * Added support for the “known_hosts” argument to accept a list of known host
   files, rather than just a single file. Known hosts can also be specified
   using the GlobalKnownHostFile and UserKnownHostFile config file options,
   each of which can take multiple filenames.
 * Added new “request_tty” option to provide finer grained control over whether
   AsyncSSH will request a TTY when opening new sessions. The default is to
   still tie this to whether a “term_type” is specified, but now that can be
   overridden. Supported options of “yes”, “no”, “force”, and “auto” match
   the values supported by OpenSSH.
 * Added new “rdns_lookup” option to control whether the server does a reverse
   DNS of client addresses to allow matching of clients based on hostname
   in authorized keys and config files. When this option is disabled (the default),

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- update to 2.2.1
 * Added optional timeout parameter to SSHClientProcess.wait()
    and SSHClientConnection.run() methods.
 * Created subclasses for SFTPError exceptions, allowing applications
    to more easily have distinct exception handling for different errors.
 * Fixed an issue in SFTP parallel I/O related to handling low-level
    connection failures
 * Fixed an issue with SFTP file copy where a local file could sometimes
    be left open if an attempt to close a remote file failed.
 * Fixed an issue in the handling of boolean return values when
    SSHServer.server_requested() returns a coroutine
 * Fixed an issue with passing tuples to the SFTP copy functions.

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- update to 2.2.0
- add gss_test.patch to avoid segfault in kerberos
 * Added support for U2F/FIDO2 security keys
 * Added login timeout client option and limits on the length and number
    of banner lines AsyncSSH will accept prior to the SSH version header.
 * Improved load_keypairs() to read public key files, confirming that they
    are consistent with their associated private key when they are present.
 * Fixed issues in the SCP server related to handling filenames with spaces.
 * Fixed an issue with resuming reading after readuntil() returns an incomplete read.
 * Fixed a potential issue related to asyncio not reporting sockname/peername
    when a connection is closed immediately after it is opened.
 * Made SSHConnection a subclass of asyncio.Protocol to please type checkers.

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- update to 2.1.0
 * Added support in the SSHProcess redirect mechanism to accept asyncio StreamReader and StreamWriter objects, allowing asyncio streams to be plugged in as stdin/stdout/stderr in an SSHProcess.
 * Added support for key handlers in the AsyncSSH line editor to trigger signals being delivered when certain “hot keys” are hit while reading input.
 * Improved cleanup of unreturned connection objects when an error occurs or the connection request is canceled or times out.
 * Improved cleanup of SSH agent client objects to avoid triggering a false positive warning in Python 3.8.
 * Added an example to the documentation for how to create reverse-direction SSH client and server connections.
 * Made check of session objects against None explicit to avoid confusion on user-defined sessions that implement __len__ or __bool__. Thanks go to Lars-Dominik Braun for contributing this improvement!
 * Some API changes which should have been included in the 2.0.0 release were missed. This release corrects that, but means that additional changes may be needed in applications moving to 2.0.1. This should hopefully be the last of such changes, but if any other issues are discovered, additional changes will be limited to 2.0.x patch releases and the API will stabilize again in the AsyncSSH 2.1 release. See the next bullet for details about the additional incompatible change.
 * To be consistent with other connect and listen functions, all methods on SSHClientConnection which previously returned None on listen failures have been changed to raise an exception instead. A new ChannelListenError exception will now be raised when an SSH server returns failure on a request to open a remote listener. This change affects the following SSHClientConnection methods: create_server, create_unix_server, start_server, start_unix_server, forward_remote_port, and forward_remote_path.
 * Restored the ability for SSHListener objects to be used as async context managers. This previously worked in AsyncSSH 1.x and was unintentionally broken in AsyncSSH 2.0.0.
 * Added support for a number of additional functions to be called from within an “async with” statement. These functions already returned objects capable of being async context managers, but were not decorated to allow them to be directly called from within “async with”. This change applies to the top level functions create_server, listen, and listen_reverse and the SSHClientConnection methods create_server, create_unix_server, start_server, start_unix_server, forward_local_port, forward_local_path, forward_remote_port, forward_remote_path, listen_ssh, and listen_reverse_ssh,
 * Fixed a couple of issues in loading OpenSSH-format certificates which were missing a trailing newline.
 * Changed load_certificates() to allow multiple certificates to be loaded from a single byte string argument, making it more consistent with how load_certificates() works when reading from a file.
 * Updated AsyncSSH to use the modern async/await syntax internally, now requiring Python 3.6 or later. Those wishing to use AsyncSSH on Python 3.4 or 3.5 should stick to the AsyncSSH 1.x releases.
 * Changed first argument of SFTPServer constructor from an SSHServerConnection (conn) to an SSHServerChannel (chan) to allow custom SFTP server implementations to access environment variables set on the channel that SFTP is run over. Applications which subclass the SFTPServer class and implement an __init__ method will need to be updated to account for this change and pass the new argument through to the SFTPServer parent class. If the subclass has no __init__ and just uses the connection, channel, and env properties of SFTPServer to access this information, no changes should be required.
 * Removed deprecated “session_encoding” and “session_errors” arguments from create_server() and listen() functions. These arguments were renamed to “encoding” and “errors” back in version 1.16.0 to be consistent with other AsyncSSH APIs.
 * Removed get_environment(), get_command(), and get_subsystem() methods on SSHServerProcess class. This information was made available as “env”, “command”, and “subsystem” properties of SSHServerProcess in AsyncSSH 1.11.0.
 * Removed optional loop argument from all public AsyncSSH APIs, consistent with the deprecation of this argument in the asyncio package in Python 3.8. Calls will now always use the event loop which is active at the time of the call.
 * Removed support for non-async context managers on AsyncSSH connections and processes and SFTP client connections and file objects. Callers should use “async with” to invoke the async the context managers on these objects.
 * Added support for SSHAgentClient being an async context manager. To be consistent with other connect calls, connect_agent() will now raise an exception when no agent is found or a connection failure occurs, rather than logging a warning and returning None. Callers should catch OSError or ChannelOpenError exceptions rather than looking for a return value of None when calling this function.
 * Added set_input() and clear_input() methods on SSHLineEditorChannel to change the value of the current input line when line editing is enabled.
 * Added is_closing() method to the SSHChannel, SSHProcess, SSHWriter, and SSHSubprocessTransport classes. mirroring the asyncio BaseTransport and StreamWriter methods added in Python 3.7.
 * Added wait_closed() async method to the SSHWriter class, mirroring the asyncio StreamWriter method added in Python 3.7.

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- Update to 1.18.0:
  * Added support for GSSAPI ECDH and Edwards DH key exchange algorithms.
  * Fixed gssapi-with-mic authentication to work with GSS key exchanges, in cases where gssapi-keyex is not supported.
  * Made connect_ssh and connect_reverse_ssh methods into async context managers, simplifying the syntax needed to use them to create tunneled SSH connections.
  * Fixed a couple of issues with known hosts matching on tunneled SSH connections.
  * Improved flexibility of key/certificate parser automatic format detection to properly recognize PEM even when other arbitrary text is present at the beginning of the file. With this change, the parser can also now handle mixing of multiple key formats in a single file.
  * Added support for OpenSSL “TRUSTED” PEM certificates. For now, no enforcement is done of the additional trust restrictions, but such certificates can be loaded and used by AsyncSSH without converting them back to regular PEM format.
  * Fixed some additional SFTP and SCP issues related to parsing of Windows paths with drive letters and paths with multiple colons.
  * Made AsyncSSH tolerant of a client which sends multiple service requests for the “ssh-userauth” service. This is needed by the Paramiko client when it tries more than one form of authentication on a connection.

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- update to 1.17.1
 * Improved construction of file paths in SFTP to better handle native Windows
     source paths containing backslashes or drive letters.
 * Improved SFTP parallel I/O for large reads and file copies to better handle
     the case where a read returns less data than what was requested when not
     at the end of the file, allowing AsyncSSH to get back the right result even
     if the requested block size is larger than the SFTP server can handle.
 * Fixed an issue where the requested SFTP block_size wasn’t used in the get,
     copy, mget, and mcopy functions if it was larger than the default size of 16 KB.
 * Fixed a problem where the list of client keys provided in
     an SSHClientConnectionOptions object wasn’t always preserved properly across
     the opening of multiple SSH connections.
 * Made AsyncSSH tolerant of unexpected authentication success/failure messages
     sent after authentication completes. AsyncSSH previously treated this as
     a protocol error and dropped the connection, while most other SSH implementations
     ignored these messages and allowed the connection to continue.
 * Made AsyncSSH tolerant of SFTP status responses which are missing error message
     and language tag fields, improving interoperability with servers that omit
     these fields. When missing, AsyncSSH treats these fields as if they were
     set to empty strings.

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

• Files Changed
• Browse Source