- update to 6.9-rc5
- eliminate 1 patch
  - patches.suse/Workaround-broken-chacha-crypto-fallback.patch (69630926011c)
- commit 7ee1174

- Update config files. Disable N_GSM (bsc#1223134).
- commit bbf9614

- Update config files: re-enable arm64 regulator modules for MediaTek boards (bsc#1222818).
  This re-enable some regulator modules, pinctrl and RTC drivers for
  MediaTek boards which has been disabled when merging config file from
  master to stable (kernel 6.5.9->6.6) branch.
  This re-applies commit b197b3604a7b (Update config files: enable arm64
  regulator modules for MediaTek boards.)
  [js] set also KEYBOARD_MTK_PMIC=m, POWER_RESET_MT6323=n, LEDS_MT6323=n,
     and MFD_MT6397=m -- the same as commit b197b3604a7b.
- commit d11a210

- Update arm* configs to 6.9-rc4. Mostly new SoC and component support enabled as modules.
- Re-enable arm in config.conf
- commit 4804f5c

- update to 6.9-rc4
- update configs
  - MITIGATION_SPECTRE_BHI=y (x86 only)
- commit 750564f

- update to 6.9-rc5
- eliminate 1 patch
  - patches.suse/Workaround-broken-chacha-crypto-fallback.patch (69630926011c)

• Files Changed
• Browse Source

Patch folder fixup

• Files Changed
• Browse Source

- update to 6.9-rc3
- commit 761535f

- update to 6.9-rc2
- refresh
  - patches.suse/0003-efi-Lock-down-the-kernel-if-booted-in-secure-boot-mode.patch
- update configs
- commit 0788112

- powerpc/crypto/chacha-p10: Fix failure on non Power10
  (boo#1218114).
- commit 47aaf44

- update to 6.9-rc1
- drop 19 patches (14 mainline, 5 stable)
  - patches.kernel.org/*
  - patches.suse/Bluetooth-btmtk-Add-MODULE_FIRMWARE-for-MT7922.patch
  - patches.suse/btrfs-fix-race-when-detecting-delalloc-ranges-during.patch
  - patches.suse/iwlwifi-cfg-Add-missing-MODULE_FIRMWARE-for-pnvm.patch
  - patches.suse/net-mdio-add-2.5g-and-5g-related-PMA-speed-constants.patch
  - patches.suse/net-phy-realtek-add-5Gbps-support-to-rtl822x_config_.patch
  - patches.suse/net-phy-realtek-add-support-for-RTL8126A-integrated-.patch
  - patches.suse/net-phy-realtek-use-generic-MDIO-constants.patch
  - patches.suse/r8169-add-support-for-RTL8126A.patch
  - patches.suse/wifi-ath11k-do-not-dump-SRNG-statistics-during-resum.patch
  - patches.suse/wifi-ath11k-fix-warning-on-DMA-ring-capabilities-eve.patch
  - patches.suse/wifi-ath11k-rearrange-IRQ-enable-disable-in-reset-pa.patch
  - patches.suse/wifi-ath11k-remove-MHI-LOOPBACK-channels.patch
  - patches.suse/wifi-ath11k-thermal-don-t-try-to-register-multiple-t.patch
  - patches.suse/wifi-brcmfmac-Fix-use-after-free-bug-in-brcmf_cfg802.patch

• Files Changed
• Browse Source

- config: add missing USELIB=n to arm configs
  ARM configs were not refreshed properly after commit 077d05a10ddb ("Update
  config files: disable CONFIG_USELIB (bsc#1219222)") because they are
  disabled at the moment. Add missing lines for (now disabled) CONFIG_USELIB
  option.
- commit 3d7309c

- Update config files: disable CONFIG_USELIB (bsc#1219222)
  It's only for the old libc5. Let's reduce the possible attack surfaces.
- commit 077d05a

- Update config files: CONFIG_SND_SOC_WSA883X=m for Thinkpad X13s audio (bsc#1217412)
- commit 9bf78b1

- config: add missing USELIB=n to arm configs
  ARM configs were not refreshed properly after commit 077d05a10ddb ("Update
  config files: disable CONFIG_USELIB (bsc#1219222)") because they are
  disabled at the moment. Add missing lines for (now disabled) CONFIG_USELIB
  option.
- commit 3d7309c

- Update config files: disable CONFIG_USELIB (bsc#1219222)
  It's only for the old libc5. Let's reduce the possible attack surfaces.
- commit 077d05a

- Update config files: CONFIG_SND_SOC_WSA883X=m for Thinkpad X13s audio (bsc#1217412)
- commit 9bf78b1

- config: add missing USELIB=n to arm configs
  ARM configs were not refreshed properly after commit 077d05a10ddb ("Update

• Files Changed
• Browse Source

Update series.conf

• Files Changed
• Browse Source

Update rk3588 patches

• Files Changed
• Browse Source

- rpm/constraints.in: set jobs for riscv to 8
  The same workers are used for x86 and riscv and the riscv builds take
  ages. So align the riscv jobs count to x86.
- commit b2c82b9

- Refresh
  patches.suse/mm-huge_memory-don-t-force-huge-page-alignment-on-32.patch.
  Update upstream status and move to sorted section.
- commit ab524e9

- Update config files. (bsc#1219328)
  Synchronize PSTORE_CONSOLE, PSTORE_PMSG, and PSTORE_FTRACE with
  SLE15-SP6.
- commit 116df61

- Update to 6.8-rc2
- eliminate 1 patch
  - patches.suse/futex-Avoid-reusing-outdated-pi_state.patch (e626cb02ee83)
- refresh configs
- commit 023a12a

- mkspec: Use variant in constraints template
  Constraints are not applied consistently with kernel package variants.
  Add variant to the constraints template as appropriate, and expand it
  in mkspec.
- commit cc68ab9

- rpm/constraints.in: add static multibuild packages
  Commit 841012b049a5 (rpm/mkspec: use kernel-source: prefix for
  constraints on multibuild) added "kernel-source:" prefix to the

• Files Changed
• Browse Source

- Update to 6.7-rc5
- refresh configs
- commit 91bd996

- kernel-source: Remove config-options.changes (jsc#PED-5021)
  The file doc/config-options.changes was used in the past to document
  kernel config changes. It was introduced in 2010 but haven't received
  any updates on any branch since 2015. The file is renamed by tar-up.sh
  to config-options.changes.txt and shipped in the kernel-source RPM
  package under /usr/share/doc. As its content now only contains outdated
  information, retaining it can lead to confusion for users encountering
  this file.
  Config changes are nowadays described in associated Git commit messages,
  which get automatically collected and are incorporated into changelogs
  of kernel RPM packages.
  Drop then this obsolete file, starting with its packaging logic.
  For branch maintainers: Upon merging this commit on your branch, please
  correspondingly delete the file doc/config-options.changes.
- commit adedbd2

- doc/README.SUSE: Simplify the list of references (jsc#PED-5021)
  Reduce indentation in the list of references, make the style consistent
  with README.md.
- commit 70e3c33

- doc/README.SUSE: Add how to update the config for module signing
  (jsc#PED-5021)
  Configuration files for SUSE kernels include settings to integrate with
  signing support provided by the Open Build Service. This creates
  problems if someone tries to use such a configuration file to build

• Files Changed
• Browse Source

Update rk3588 patches

• Files Changed
• Browse Source

Fix config compression

• Files Changed
• Browse Source

- Update to 6.7-rc1
- drop 36 patches (31 stable, 5 mainline)
  - patches.kernel.org/*
  - patches.rpmify/kbuild-dummy-tools-pretend-we-understand-fpatchable-.patch
  - patches.suse/firmware-Add-support-for-Qualcomm-UEFI-Secure-Applic.patch
  - patches.suse/firmware-qcom_scm-Add-support-for-Qualcomm-Secure-Ex.patch
  - patches.suse/lib-ucs2_string-Add-UCS-2-strscpy-function.patch
  - patches.suse/wifi-ath11k-rename-the-sc-naming-convention-to-ab.patch
- refresh
  - patches.rpmify/Add-ksym-provides-tool.patch
  - patches.suse/add-product-identifying-information-to-vmcoreinfo.patch
  - patches.suse/add-suse-supported-flag.patch
  - patches.suse/kernel-add-product-identifying-information-to-kernel-build.patch
  - patches.suse/vfs-add-super_operations-get_inode_dev
  - patches.suse/wifi-ath11k-support-hibernation.patch
- fix patch metadata
  - patches.rpmify/Add-ksym-provides-tool.patch
- disable ARM architectures (need config update)
- new config options
  - Processor type and features
    - CONFIG_INTEL_TDX_HOST=n
  - Binary Emulations
    - CONFIG_IA32_EMULATION_DEFAULT_DISABLED=n
  - Virtualization
    - CONFIG_KVM_MAX_NR_VCPUS=4096
  - Enable loadable module support
    - CONFIG_MODULE_SIG_SHA3_256=n
    - CONFIG_MODULE_SIG_SHA3_384=n
    - CONFIG_MODULE_SIG_SHA3_512=n
  - Memory Management options

• Files Changed
• Browse Source

- Update to 6.6-rc6
- refresh configs
- commit 8f5995d

- Update to 6.6-rc6
- refresh configs
- commit 8f5995d

- Update to 6.6-rc6
- refresh configs
- commit 8f5995d

- Update to 6.6-rc6
- refresh configs
- commit 8f5995d

- Update to 6.6-rc6
- refresh configs
- commit 8f5995d

- Update to 6.6-rc6
- refresh configs
- commit 8f5995d

- Update to 6.6-rc6
- refresh configs
- commit 8f5995d

- Update to 6.6-rc6
- refresh configs

• Files Changed
• Browse Source

- mkspec-dtb: add toplevel symlinks also on arm
- commit d26c540

- Update to 6.6-rc5
- update configs
  - IMA_BLACKLIST_KEYRING=n
  - IMA_LOAD_X509=n
  - IPU_BRIDGE=m (new on riscv64)
- commit a59832f

- mkspec-dtb: add toplevel symlinks also on arm
- commit d26c540

- Update to 6.6-rc5
- update configs
  - IMA_BLACKLIST_KEYRING=n
  - IMA_LOAD_X509=n
  - IPU_BRIDGE=m (new on riscv64)
- commit a59832f

- mkspec-dtb: add toplevel symlinks also on arm
- commit d26c540

- Update to 6.6-rc5
- update configs
  - IMA_BLACKLIST_KEYRING=n
  - IMA_LOAD_X509=n
  - IPU_BRIDGE=m (new on riscv64)
- commit a59832f

• Files Changed
• Browse Source

- Update to 6.6-rc4
- eliminate 1 patch
  - patches.suse/Revert-101bd907b424-misc-rtsx-judge-ASPM-Mode-to-set.patch (0e4cac557531)
- commit 019d4ec

- kernel-binary: Move build-time definitions together
  Move source list and build architecture to buildrequires to aid in
  future reorganization of the spec template.
- commit 30e2cef

- Update to 6.6-rc4
- eliminate 1 patch
  - patches.suse/Revert-101bd907b424-misc-rtsx-judge-ASPM-Mode-to-set.patch (0e4cac557531)
- commit 019d4ec

- kernel-binary: Move build-time definitions together
  Move source list and build architecture to buildrequires to aid in
  future reorganization of the spec template.
- commit 30e2cef

- Update to 6.6-rc4
- eliminate 1 patch
  - patches.suse/Revert-101bd907b424-misc-rtsx-judge-ASPM-Mode-to-set.patch (0e4cac557531)
- commit 019d4ec

- kernel-binary: Move build-time definitions together
  Move source list and build architecture to buildrequires to aid in
  future reorganization of the spec template.
- commit 30e2cef

• Files Changed
• Browse Source

Update config

• Files Changed
• Browse Source

add rk3588 patches

• Files Changed
• Browse Source

• Browse Source