- update to 6.14.2
  + #97 Fix nvme attribute check-list when auto interface is given 
    and device is nvme

• Files Changed
• Browse Source

xz' the tarball

• Files Changed
• Browse Source

- update to 6.14.1
  + Fix default Percent_Lifetime_Remain threshold handling when -w 
    is given by @ymartin-ovh , see #93
  + Fix debug output of raw check list when using -l or 
    ssd-lifetime, see #94
  + Fix --hide-sn when combined with --debug (the smartctl output 
    still showed the serial number), see #94

• Files Changed
• Browse Source

- follow upstream license change: GPL-3.0-or-later
- package COPYING.md as license file

• Files Changed
• Browse Source

- Update to 6.14.0
  + Show drive(s) causing the UNKNOWN status when checking multiple 
    drives using -g / --global parameter #89
  + Add possibility to hide the drive's serial number in the plugin output
    using --hide-sn #90
  + Check (by default) for high Load Cycle Count of hard drive. Can 
    be ignored using --skip-load-cycles parameter #91
- package SSD-TBW-Warranty.md as documentation
- add user icinga to the sudo profile for check_smart - allowing 
  icinga to execute the script as well

• Files Changed
• Browse Source

- Update to 6.13.0
  + Allow skip temperature check, introduces new parameter --skip-temp-check
  + Improved handling of missing or non-executable smartctl command

• Files Changed
• Browse Source

- Update to 6.12.2:
  + Bugfix when interface parameter was missing in combination 
    with -g (#79)

• Files Changed
• Browse Source

Adjust description

- Update to 6.12.1:
  + Fix regression bug in 6.12.0 (#77)
  + Security fix in trailing path for pseudo-devices (Additional 
    anchor for security)
  + Update help
  + Add Erase_Fail_Count_Total to default raw list
  + Fix NVMe perfdata (issue 74)
- encapsulate the recommends to allow building on RHEL based 
  distributions

• Files Changed
• Browse Source

• Files Changed
• Browse Source

use local file for now

• Files Changed
• Browse Source

fix service file to use the new version as well

• Files Changed
• Browse Source

- Fix regression bug in 6.12.0 (#77)
- Security fix in trailing path for pseudo-devices (Additional 
  anchor for security)
- Update help
- Add Erase_Fail_Count_Total to default raw list
- Fix NVMe perfdata (issue 74)

• Files Changed
• Browse Source

- reduce the sudoers rights for nagios user from using smartctl to 
  only call the plugin itself. As the plugin is called with sudo 
  rights, the included sudo calls in the plugin will also be executed
  as root and don't cause any problem. As the plugin is only writable 
  by root, this forbits the nagios user to execute smartctl with 
  arbitrary options (boo#1191671)
- update to 6.11.0
  + Handle dots in NVMe attributes, prioritize (order) alerts
  + Add aacraid devices (6.10.0)
- add rpmlintrc

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- remove check_smart.pl

• Files Changed
• Browse Source

- Update to 6.9.1:
  This is a security-release (bsc#1183057)
  + Fixes the regular expression for pseudo-devices under the /dev/bus/N path.
  from 6.9.0
  + Allows using PCI device paths as device name(s) (#64)
  + Introduce new optional parameter -l/--ssd-lifetime) which additionally 
    checks SMART attribute "Percent_Lifetime_Remain" 
    (available on some SSD drives). (#66 #67)
  from 6.8.0
  + Allow skip self-assessment check (--skip-self-assessment)
  + Add Command_Timeout to default raw list
  from 6.7.1
  + Bugfix to make --warn work (issue #54)
  from 6.7.0
  + Added support for NVMe drives
  from 6.6.1
  + Fix 'deprecation warning on regex with curly brackets' (6.6.1)
  from 6.6.0
  + The feature was requested in #30 . This PR adds the possibility to
    use 3ware,N and cciss,N drives in combination with the 
    global -g parameter.
  + Furthermore this PR adjusts the output of the plugin when the -g 
    is used in combination with hardware raid controllers. Instead of
    showing the logical device name (/dev/sda for example), the plugin
    will now show the controller with drive number
  from 6.5.0:
  + Add Reported_Uncorrect and Reallocated_Event_Count to default raw list.
  + As of 6.5 the following SMART attributes are by default checked and 
    may result in alert when threshold (default 0 is reached):
    'Current_Pending_Sector,Reallocated_Sector_Ct,Program_Fail_Cnt_Total,

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- Update to version 6.4
  - Allow detection of more than 26 devices / issue #5 (rev 5.3)
  - Different ATA vs. SCSI lookup (rev 5.4)
  - Allow script to run outside of nagios plugins dir / wiki url
    update (rev 5.5)
  - Change syntax of -g parameter (regex is now awaited from
    input) (rev 5.6)
  - Fix Use of uninitialized value $device (rev 5.7)
  - Allow multiple devices for interface type megaraid,
    e.g. "megaraid,[1-5]" (rev 5.8)
  - allow type "auto" (rev 5.9)
  - Check selftest log for errors using new parameter -s (rev 5.10)
  - Add exclude list (-e) to ignore certain attributes (5.11)
  - Fix 'Use of uninitialized value' warnings (5.11.1)
  - Add raw check list (-r) and warning thresholds (-w) (6.0)
  - Allow using pseudo bus device /dev/bus/N (6.1)
  - Add device model and serial number in output (6.2)
  - Allow exclusion from perfdata as well (-E) and by attribute
    number (6.3)
  - Remove dependency on utils.pm, add quiet parameter (6.4)
- Drop not longer needed patch:
  * enable_auto_interface.patch (obsolete, type auto was added
    upstream in v5.9).

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- include <abstractions/user-tmp> in apparmor profile

• Files Changed
• Browse Source